Commit graph

1,385,397 commits

Author SHA1 Message Date
Vibhore Vardhan
ec24643bdd firmware: ti_sci: Add system suspend and resume call
Introduce system suspend call that enables the ti_sci driver to support
low power mode when the user space issues a suspend to mem.

The following power management operations defined in the TISCI
Low Power Mode API [1] are implemented to support suspend and resume:

1) TISCI_MSG_PREPARE_SLEEP
Prepare the SOC for entering into a low power mode and
provide details to firmware about the state being entered.

2) TISCI_MSG_SET_IO_ISOLATION
Control the IO isolation for Low Power Mode.

Also, write a ti_sci_prepare_system_suspend call to be used in the driver
suspend handler to allow the system to identify the low power mode being
entered and if necessary, send TISCI_MSG_PREPARE_SLEEP with information
about the mode being entered.

Sysfw version >= 10.00.04 support LPM_DM_MANAGED capability [2], where
Device Mgr firmware now manages which low power mode is chosen. Going
forward, this is the default configuration supported for TI AM62 family
of devices. The state chosen by the DM can be influenced by sending
constraints using the new LPM constraint APIs.

In case the firmware does not support LPM_DM_MANAGED mode, the mode
selection logic can be extended as needed. If no suspend-to-RAM modes
are supported, return without taking any action.

We're using "pm_suspend_target_state" to map the kernel's target suspend
state to SysFW low power mode. Make sure this is available only when
CONFIG_SUSPEND is enabled.

Suspend has to be split into two parts, ti_sci_suspend() will send
the prepare sleep message to prepare suspend. ti_sci_suspend_noirq()
sets IO isolation which needs to be done as late as possible to avoid
any issues. On resume this has to be done as early as possible.

[1] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/pm/lpm.html

Co-developed-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Georgi Vlaev <g-vlaev@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Tested-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20241007-tisci-syssuspendresume-v13-3-ed54cd659a49@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
2024-10-25 10:45:07 -05:00
Georgi Vlaev
055b6cfb62 firmware: ti_sci: Add support for querying the firmware caps
Add support for the TISCI_MSG_QUERY_FW_CAPS message, used to retrieve
the firmware capabilities of the currently running system firmware. The
message belongs to the TISCI general core message API [1] and is
available in SysFW version 08.04.03 and above. Currently, the message is
supported on devices with split architecture of the system firmware (DM
+ TIFS) like AM62x. Old revisions or not yet supported platforms will
NACK this request.

We're using this message locally in ti_sci.c to get the low power
features of the FW/SoC. As there's no other kernel consumers yet, this
is not added to struct ti_sci_core_ops.

Sysfw version >= 10.00.04 support LPM_DM_MANAGED capability [2], where
Device Mgr firmware now manages which low power mode is chosen. Going
forward, this is the default configuration supported for TI AM62 family
of devices. The state chosen by the DM can be influenced by sending
constraints using the new LPM constraint APIs.

[1] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/general/core.html
[2] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/general/core.html#tisci-msg-query-fw-caps

Signed-off-by: Georgi Vlaev <g-vlaev@ti.com>
[vibhore@ti.com: Support for LPM_DM_MANAGED mode]
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20241007-tisci-syssuspendresume-v13-2-ed54cd659a49@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
2024-10-25 10:45:07 -05:00
Christophe JAILLET
c7e09a613b clk: sunxi-ng: Constify struct ccu_reset_map
'struct ccu_reset_map' are not modified in these drivers.

Constifying this structure moves some data to a read-only section, so
increase overall security.

On a x86_64, with allmodconfig, as an example:
Before:
======
   text	   data	    bss	    dec	    hex	filename
   1533	   2224	      0	   3757	    ead	drivers/clk/sunxi-ng/ccu-sun20i-d1-r.o

After:
=====
   text	   data	    bss	    dec	    hex	filename
   1597	   2160	      0	   3757	    ead	drivers/clk/sunxi-ng/ccu-sun20i-d1-r.o

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/44745f27034fa670605cd16966a39b7fe88fe5a6.1726863905.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2024-10-25 23:35:49 +08:00
Andre Przywara
dd36ad71ad ARM: dts: cubieboard4: Fix DCDC5 regulator constraints
The DCDC5 voltage rail in the X-Powers AXP809 PMIC has a resolution of
50mV, so the currently enforced limits of 1.475 and 1.525 volts cannot
be set, when the existing regulator value is beyond this range.

This will lead to the whole regulator driver to give up and fail
probing, which in turn will hang the system, as essential devices depend
on the PMIC.
In this case a bug in U-Boot set the voltage to 1.75V (meant for DCDC4),
and the AXP driver's attempt to correct this lead to this error:
==================
[    4.447653] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
[    4.450066] vcc-dram: Bringing 1750000uV into 1575000-1575000uV
[    4.460272] vcc-dram: failed to apply 1575000-1575000uV constraint: -EINVAL
[    4.474788] axp20x-regulator axp20x-regulator.0: Failed to register dcdc5
[    4.482276] axp20x-regulator axp20x-regulator.0: probe with driver axp20x-regulator failed with error -22
==================

Set the limits to values that can be programmed, so any correction will
be successful.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Fixes: 1e1dea7265 ("ARM: dts: sun9i: cubieboard4: Add AXP809 PMIC device node and regulators")
Link: https://patch.msgid.link/20241007222916.19013-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2024-10-25 23:27:34 +08:00
Rafael J. Wysocki
1646a3f2b1 Merge branch 'pm-powercap'
Merge a dtpm_devfreq power capping driver fix for 6.12-rc5:

 - Fix a dev_pm_qos_add_request() return value check in
   __dtpm_devfreq_setup() to prevent it from failing if
   a positive number is returned (Yuan Can).

* pm-powercap:
  powercap: dtpm_devfreq: Fix error check against dev_pm_qos_add_request()
2024-10-25 17:27:19 +02:00
Ryan Walklin
86a8f1aef9 arm64: dts: allwinner: h313/h616/h618/h700: Enable audio codec for all supported boards
Now that the H616 (and variants) audio codec is supported, enable it for
boards with a mainline DTS. The Tanix TX1, Transpeed 8K618-T and X-96
Mate have all been tested with the onboard 3.5mm audio jack and the
Orange Pi Zero 3 with a 3.5mm jack connected to the audio header.

The RG35XX (2024, -H, -Plus and -SP variants) are also tested working
but have a separate mux and GPIO-controlled (PI5) power amplifier to
support both a headphone jack and onboard speakers.

The headphone jack has a GPIO for jack detection, but this is not
currently supported by the driver, so audio is heard both via the
headphone jack and speakers when the speaker amp is powered (by the
CLDO1 regulator, defined as always-on until proper jack detection is
implemented).

Define the audio codec and routing for all supported H616 and variant
boards, and power and speaker amp enablement where present on boards and
known.

Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241023075917.186835-8-ryan@testtoast.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2024-10-25 23:21:51 +08:00
Ryan Walklin
3eef85034c arm64: dts: allwinner: h616: Add audio codec node
Now that the sun4i codec driver supports the H616, add a node in the
device tree for it (correcting the spdif block location at the same
time).

Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241023075917.186835-7-ryan@testtoast.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2024-10-25 23:21:51 +08:00
Markus Schneider-Pargmann
3e360703d0 PM: QoS: Export dev_pm_qos_read_value
Export the function dev_pm_qos_read_value(). Most other functions
mentioned in Documentation/power/pm_qos_interface.rst are already
exported, so export this one as well.

This function will be used to read the resume latency in a driver that
can also be compiled as a module.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/lkml/CAJZ5v0g1Ri_wKYppomE6RXqcZXRnX7bLOPMtsQaao0uchSfE9A@mail.gmail.com/
Link: https://lore.kernel.org/r/20241007-tisci-syssuspendresume-v13-1-ed54cd659a49@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
2024-10-25 10:17:37 -05:00
Nick Chan
5c9de6f45d arm64: Kconfig: Update help text for CONFIG_ARCH_APPLE
Apple's A7-A11 SoC is now supported, so the original help text is no longer
accurate.

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
2024-10-26 00:14:46 +09:00
Konrad Dybcio
d23457abac arm64: dts: apple: Add A11 devices
Add DTS files for the A11 SoC and the following devices based on it:

- iPhone 8
- iPhone 8 Plus
- iPhone X

On A11, Apple has introduced independent performance and efficiency core
clusters, so indicate it in the device tree as well.

Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Nick: SMP and m1n1 support, disabled SMC pinctrl]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
2024-10-26 00:14:46 +09:00
Konrad Dybcio
a9a28afb83 arm64: dts: apple: Add A10X devices
Add DTS files for the A10X SoC and the following devices based on it:

- Apple TV 4K
- iPad Pro (2nd Generation) (10.5 Inch)
- iPad Pro (2nd Generation) (12.9 Inch)

Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Nick: SMP, m1n1 and Apple TV 4K support, uart interrupt and pinctrl fixes]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
2024-10-26 00:14:45 +09:00
Konrad Dybcio
33ee92b964 arm64: dts: apple: Add A10 devices
Add DTS files for the A10 SoC and the following devices based on it:

- iPhone 7
- iPhone 7 Plus
- iPod touch 7
- iPad 6
- iPad 7

Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Nick: SMP, m1n1 and AOP pinctrl support]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
2024-10-26 00:14:45 +09:00
Konrad Dybcio
1100a117ed arm64: dts: apple: Add A9X devices
Add the device tree for the A9X SoC and the devices based on it:

- iPad Pro (9.7 Inch)
- iPad Pro (12.9 Inch) (1st generation)

Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Nick: SMP and m1n1 support, uart interrupt and pinctrl fixes]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
2024-10-26 00:14:45 +09:00
Konrad Dybcio
0806906b82 arm64: dts: apple: Add A9 devices
Add DTS files for the A9 SoC and the following devices based on it:
- iPhone 6s
- iPhone 6s Plus
- iPhone SE (2016)
- iPad 5

Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Nick: SMP, m1n1 and AOP pinctrl support]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
2024-10-26 00:14:45 +09:00
Konrad Dybcio
c2da50cb54 arm64: dts: apple: Add A8X devices
Add DTS files for the A8X SoC and the only device based on it, the iPad
Air 2.

Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Markuss: System memory bits]
Co-developed-by: Markuss Broks <markuss.broks@gmail.com>
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
[Nick: SMP, m1n1 and gpio-keys support, pinctrl fixes]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
2024-10-26 00:14:45 +09:00
Konrad Dybcio
1841831303 arm64: dts: apple: Add A8 devices
Add DTS files for the A8 SoC and the following devices based on it:

 - iPhone 6
 - iPhone 6 Plus
 - iPad mini 4
 - iPod touch 6
 - Apple TV HD

The remaining HomePod is not supported as part of this patch.

Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Ivalyo: system memory bits, iPhone 6 gpio-keys, pinctrl]
Co-developed-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
[Nick: SMP and m1n1 support, gpio-keys additions]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
2024-10-26 00:14:45 +09:00
Konrad Dybcio
4b9eeff5da arm64: dts: apple: Add A7 devices
Add DTS files for the A7 SoC and the following devices based on it:

- iPhone 5s
- iPad Air (1)
- iPad mini 2
- iPad mini 3

Signed-off-by: Konrad Dybcio <konradybcio@kernel.org>
[Nick: SMP and m1n1 support, gpio-keys additions]
Co-developed-by: Nick Chan <towinchenmi@gmail.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
2024-10-26 00:14:45 +09:00
Nick Chan
cc35d5bc24 dt-bindings: arm: apple: Add A11 devices
Add the follow apple,t8015 based platforms:

- iPhone 8
- iPhone 8 Plus
- iPhone X

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
2024-10-26 00:14:45 +09:00
Nick Chan
1600498764 dt-bindings: arm: apple: Add A10X devices
Add the following apple,t8011 based platforms:

- Apple TV 4K
- iPad Pro (2nd Generation) (10.5 Inch)
- iPad Pro (2nd Generation) (12.9 Inch)

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
2024-10-26 00:14:45 +09:00
Nick Chan
179626edea dt-bindings: arm: apple: Add A10 devices
Adds the following apple,t8010 based platforms:

 - iPhone 7
 - iPhone 7 Plus
 - iPod touch 7
 - iPad 6
 - iPad 7

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
2024-10-26 00:14:45 +09:00
Nick Chan
bef712e3c1 dt-bindings: arm: apple: Add A9X devices
Adds the following apple,s8001 based platforms:

- iPad Pro (9.7 Inch)
- iPad Pro (12.9 Inch) (1st generation)

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
2024-10-26 00:14:45 +09:00
Nick Chan
51cec658c3 dt-bindings: arm: apple: Add A9 devices
Adds the following apple,s8000 and apple,s8003 based platforms:

- iPhone 6s
- iPhone 6s Plus
- iPhone SE (2016)
- iPad 5

apple,s8000 is the Samsung A9, while apple,s8003 is the TSMC A9.

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
2024-10-26 00:14:45 +09:00
Nick Chan
bce8129bd9 dt-bindings: arm: apple: Add A8X devices
Add the only platform based on apple,t7001, the iPad Air 2.

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
2024-10-26 00:14:45 +09:00
Nick Chan
474952a48a dt-bindings: arm: apple: Add A8 devices
This adds the following apple,t7000 based platforms:

 - iPhone 6
 - iPhone 6 Plus
 - iPad mini 4
 - iPod touch 6
 - Apple TV HD

The remaining HomePod is not supported as part of this patch.

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
2024-10-26 00:14:45 +09:00
Nick Chan
f30ce10e9a dt-bindings: arm: apple: Add A7 devices
This adds the following apple,s5l8960x platforms:

- iPhone 5s
- iPad Air (1)
- iPad Mini 2
- iPad Mini 3

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
2024-10-26 00:14:45 +09:00
Nick Chan
9a944c7ed4 dt-bindings: pinctrl: apple,pinctrl: Add A7-A11 compatibles
The block found on Apple's A7-A11 SoCs are compatible with the
existing driver so add their per-SoC compatibles.

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
2024-10-26 00:14:45 +09:00
Nick Chan
7b417cc5df dt-bindings: watchdog: apple,wdt: Add A7-A11 compatibles
The blocks on A7-A11 SoCs are compatible with the existing driver so
add their per-SoC compatibles.

Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
2024-10-26 00:14:45 +09:00
Nick Chan
ea90e3a165 dt-bindings: arm: cpus: Add Apple A7-A11 CPU cores
Add the following CPU cores:

- apple,cyclone: A7 cores
- apple,typhoon: A8 cores
- apple,twister: A9 cores
- apple,hurricane-zephyr: A10 logical cores
- apple,monsoon: A11 performance cores
- apple,mistral: A11 efficiency cores

In the Apple A10, there are physical performance-efficiency cores that
forms logical cores to software depending on the current p-state, and
only one type of core may be active at one time.

Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Hector Martin <marcan@marcan.st>
2024-10-26 00:14:45 +09:00
Rafael J. Wysocki
54774abb55 Merge branches 'acpi-resource' and 'acpi-button'
Merge new DMI quirks for 6.12-rc5:

 - Add an ACPI IRQ override quirk for LG 16T90SP (Christian Heusel).

 - Add a lid switch detection quirk for Samsung Galaxy Book2 (Shubham
   Panwar).

* acpi-resource:
  ACPI: resource: Add LG 16T90SP to irq1_level_low_skip_override[]

* acpi-button:
  ACPI: button: Add DMI quirk for Samsung Galaxy Book2 to fix initial lid detection issue
2024-10-25 17:08:14 +02:00
Josef Bacik
8807f117be fuse: convert fuse_notify_store to use folios
This function creates pages in an inode and copies data into them,
update the function to use a folio instead of a page, and use the
appropriate folio helpers.

[SzM: use filemap_grab_folio()]

[Hau Tao: The third argument of folio_zero_range() should be the length to
be zeroed, not the total length. Fix it by using folio_zero_segment()
instead in fuse_notify_store()]

Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-10-25 17:05:50 +02:00
Josef Bacik
71e10dc2f5 fuse: convert fuse_retrieve to use folios
We're just looking for pages in a mapping, use a folio and the folio
lookup function directly instead of using the page helper.

Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-10-25 17:05:50 +02:00
Josef Bacik
949d67ac2e fuse: use the folio based vmstat helpers
In order to make it easier to switch to folios in the fuse_args_pages
update the places where we update the vmstat counters for writeback to
use the folio related helpers.  On the inc side this is easy as we
already have the folio, on the dec side we have to page_folio() the
pages for now.

Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-10-25 17:05:50 +02:00
Miklos Szeredi
d34a5575e6 fuse: remove stray debug line
It wasn't there when the patch was posted for review, but somehow made it
into the pull.

Link: https://lore.kernel.org/all/20240913104703.1673180-1-mszeredi@redhat.com/
Fixes: efad7153bf ("fuse: allow O_PATH fd for FUSE_DEV_IOC_BACKING_OPEN")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-10-25 17:05:49 +02:00
Josef Bacik
6930b8dac1 fuse: convert fuse_writepage_need_send to take a folio
fuse_writepage_need_send is called by fuse_writepages_fill() which
already has a folio.  Change fuse_writepage_need_send() to take a folio
instead, add a helper to check if the folio range is under writeback and
use this, as well as the appropriate folio helpers in the rest of the
function.  Update fuse_writepage_need_send() to pass in the folio
directly.

Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-10-25 17:05:49 +02:00
Josef Bacik
65fe891d90 fuse: convert fuse_do_readpage to use folios
Now that the buffered write path is using folios, convert
fuse_do_readpage() to take a folio instead of a page, update it to use
the appropriate folio helpers, and update the callers to pass in the
folio directly instead of a page.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-10-25 17:05:49 +02:00
Josef Bacik
e6befec5e9 fuse: use kiocb_modified in buffered write path
This combines the file_remove_privs() and file_update_time() call into
one call.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-10-25 17:05:49 +02:00
Josef Bacik
184b6eb364 fuse: convert fuse_page_mkwrite to use folios
Convert this to grab the folio directly, and update all the helpers to
use the folio related functions.

Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-10-25 17:05:49 +02:00
Josef Bacik
9bafbe7ae0 fuse: convert fuse_fill_write_pages to use folios
Convert this to grab the folio directly, and update all the helpers to
use the folio related functions.

Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-10-25 17:05:49 +02:00
Josef Bacik
785d06afc8 fuse: convert fuse_send_write_pages to use folios
Convert this to grab the folio from the fuse_args_pages and use the
appropriate folio related functions.

Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-10-25 17:05:49 +02:00
Josef Bacik
3eab9d7bc2 fuse: convert readahead to use folios
Currently we're using the __readahead_batch() helper which populates our
fuse_args_pages->pages array with pages.  Convert this to use the newer
folio based pattern which is to call readahead_folio() to get the next
folio in the read ahead batch.  I've updated the code to use things like
folio_size() and to take into account larger folio sizes, but this is
purely to make that eventual work easier to do, we currently will not
get large folios so this is more future proofing than actual support.

[SzM: remove check for readahead_folio() won't return NULL (at least for
now) so remove ugly assign in conditional.]

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-10-25 17:05:49 +02:00
Josef Bacik
aaa32429da fuse: use fuse_range_is_writeback() instead of iterating pages
fuse_send_readpages() waits for writeback on each page.  This can be
replaced by a single call to fuse_range_is_writeback().

[SzM: split this off from "fuse: convert readahead to use folios"]

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-10-25 17:05:49 +02:00
Hou Tao
86b74eb5a1 virtiofs: use GFP_NOFS when enqueuing request through kworker
When invoking virtio_fs_enqueue_req() through kworker, both the
allocation of the sg array and the bounce buffer still use GFP_ATOMIC.
Considering the size of the sg array may be greater than PAGE_SIZE, use
GFP_NOFS instead of GFP_ATOMIC to lower the possibility of memory
allocation failure and to avoid unnecessarily depleting the atomic
reserves. GFP_NOFS is not passed to virtio_fs_enqueue_req() directly,
GFP_KERNEL and memalloc_nofs_{save|restore} helpers are used instead.

It may seem OK to pass GFP_NOFS to virtio_fs_enqueue_req() as well when
queuing the request for the first time, but this is not the case. The
reason is that fuse_request_queue_background() may call
->queue_request_and_unlock() while holding fc->bg_lock, which is a
spin-lock. Therefore, still use GFP_ATOMIC for it.

Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-10-25 17:05:49 +02:00
Hou Tao
41748675c0 virtiofs: use pages instead of pointer for kernel direct IO
When trying to insert a 10MB kernel module kept in a virtio-fs with cache
disabled, the following warning was reported:

  ------------[ cut here ]------------
  WARNING: CPU: 1 PID: 404 at mm/page_alloc.c:4551 ......
  Modules linked in:
  CPU: 1 PID: 404 Comm: insmod Not tainted 6.9.0-rc5+ #123
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
  RIP: 0010:__alloc_pages+0x2bf/0x380
  ......
  Call Trace:
   <TASK>
   ? __warn+0x8e/0x150
   ? __alloc_pages+0x2bf/0x380
   __kmalloc_large_node+0x86/0x160
   __kmalloc+0x33c/0x480
   virtio_fs_enqueue_req+0x240/0x6d0
   virtio_fs_wake_pending_and_unlock+0x7f/0x190
   queue_request_and_unlock+0x55/0x60
   fuse_simple_request+0x152/0x2b0
   fuse_direct_io+0x5d2/0x8c0
   fuse_file_read_iter+0x121/0x160
   __kernel_read+0x151/0x2d0
   kernel_read+0x45/0x50
   kernel_read_file+0x1a9/0x2a0
   init_module_from_file+0x6a/0xe0
   idempotent_init_module+0x175/0x230
   __x64_sys_finit_module+0x5d/0xb0
   x64_sys_call+0x1c3/0x9e0
   do_syscall_64+0x3d/0xc0
   entry_SYSCALL_64_after_hwframe+0x4b/0x53
   ......
   </TASK>
  ---[ end trace 0000000000000000 ]---

The warning is triggered as follows:

1) syscall finit_module() handles the module insertion and it invokes
kernel_read_file() to read the content of the module first.

2) kernel_read_file() allocates a 10MB buffer by using vmalloc() and
passes it to kernel_read(). kernel_read() constructs a kvec iter by
using iov_iter_kvec() and passes it to fuse_file_read_iter().

3) virtio-fs disables the cache, so fuse_file_read_iter() invokes
fuse_direct_io(). As for now, the maximal read size for kvec iter is
only limited by fc->max_read. For virtio-fs, max_read is UINT_MAX, so
fuse_direct_io() doesn't split the 10MB buffer. It saves the address and
the size of the 10MB-sized buffer in out_args[0] of a fuse request and
passes the fuse request to virtio_fs_wake_pending_and_unlock().

4) virtio_fs_wake_pending_and_unlock() uses virtio_fs_enqueue_req() to
queue the request. Because virtiofs need DMA-able address, so
virtio_fs_enqueue_req() uses kmalloc() to allocate a bounce buffer for
all fuse args, copies these args into the bounce buffer and passed the
physical address of the bounce buffer to virtiofsd. The total length of
these fuse args for the passed fuse request is about 10MB, so
copy_args_to_argbuf() invokes kmalloc() with a 10MB size parameter and
it triggers the warning in __alloc_pages():

	if (WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp))
		return NULL;

5) virtio_fs_enqueue_req() will retry the memory allocation in a
kworker, but it won't help, because kmalloc() will always return NULL
due to the abnormal size and finit_module() will hang forever.

A feasible solution is to limit the value of max_read for virtio-fs, so
the length passed to kmalloc() will be limited. However it will affect
the maximal read size for normal read. And for virtio-fs write initiated
from kernel, it has the similar problem but now there is no way to limit
fc->max_write in kernel.

So instead of limiting both the values of max_read and max_write in
kernel, introducing use_pages_for_kvec_io in fuse_conn and setting it as
true in virtiofs. When use_pages_for_kvec_io is enabled, fuse will use
pages instead of pointer to pass the KVEC_IO data.

After switching to pages for KVEC_IO data, these pages will be used for
DMA through virtio-fs. If these pages are backed by vmalloc(),
{flush|invalidate}_kernel_vmap_range() are necessary to flush or
invalidate the cache before the DMA operation. So add two new fields in
fuse_args_pages to record the base address of vmalloc area and the
condition indicating whether invalidation is needed. Perform the flush
in fuse_get_user_pages() for write operations and the invalidation in
fuse_release_user_pages() for read operations.

It may seem necessary to introduce another field in fuse_conn to
indicate that these KVEC_IO pages are used for DMA, However, considering
that virtio-fs is currently the only user of use_pages_for_kvec_io, just
reuse use_pages_for_kvec_io to indicate that these pages will be used
for DMA.

Fixes: a62a8ef9d9 ("virtio-fs: add virtiofs filesystem")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Tested-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-10-25 17:05:49 +02:00
yangyun
cc23d537e5 fuse: remove useless IOCB_DIRECT in fuse_direct_read/write_iter
Commit 23c94e1cdc ("fuse: Switch to using async direct IO
for FOPEN_DIRECT_IO") gave the async direct IO code path in the
fuse_direct_read_iter() and fuse_direct_write_iter(). But since
these two functions are only called under FOPEN_DIRECT_IO is set,
it seems that we can also use the async direct IO even the flag
IOCB_DIRECT is not set to enjoy the async direct IO method. Also
move the definition of fuse_io_priv to where it is used in fuse_
direct_write_iter.

Signed-off-by: yangyun <yangyun50@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-10-25 17:05:49 +02:00
Joanne Koong
2b3933b1e0 fuse: enable dynamic configuration of fuse max pages limit (FUSE_MAX_MAX_PAGES)
Introduce the capability to dynamically configure the max pages limit
(FUSE_MAX_MAX_PAGES) through a sysctl. This allows system administrators
to dynamically set the maximum number of pages that can be used for
servicing requests in fuse.

Previously, this is gated by FUSE_MAX_MAX_PAGES which is statically set
to 256 pages. One result of this is that the buffer size for a write
request is limited to 1 MiB on a 4k-page system.

The default value for this sysctl is the original limit (256 pages).

$ sysctl -a | grep max_pages_limit
fs.fuse.max_pages_limit = 256

$ sysctl -n fs.fuse.max_pages_limit
256

$ echo 1024 | sudo tee /proc/sys/fs/fuse/max_pages_limit
1024

$ sysctl -n fs.fuse.max_pages_limit
1024

$ echo 65536 | sudo tee /proc/sys/fs/fuse/max_pages_limit
tee: /proc/sys/fs/fuse/max_pages_limit: Invalid argument

$ echo 0 | sudo tee /proc/sys/fs/fuse/max_pages_limit
tee: /proc/sys/fs/fuse/max_pages_limit: Invalid argument

$ echo 65535 | sudo tee /proc/sys/fs/fuse/max_pages_limit
65535

$ sysctl -n fs.fuse.max_pages_limit
65535

Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2024-10-25 17:05:49 +02:00
Ryan Walklin
d0c322b6e4 clk: sunxi-ng: h616: Add sigma-delta modulation settings for audio PLL
Allwinner has previously released a H616 audio driver which also
provides sigma-delta modulation for the audio PLL clocks. This approach
is used in other Allwinner SoCs, including the H3 and A64.

The manual-provided clock values are:
PLL_AUDIO(hs) = 24 MHz*N/M1
PLL_AUDIO(4X) = 24 MHz*N/M0/M1/P
PLL_AUDIO(2X) = 24 MHz*N/M0/M1/P/2
PLL_AUDIO(1X) = 24 MHz*N/M0/M1/P/4

A fixed post-divider of 2 is used to account for a M0 divider of
2, which cannot be modelled by the existing macros and ccu_nm struct.

Add SDM to the H616 clock control unit driver.

Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Tested-by: Marcus Cooper <codekipper@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241023075917.186835-2-ryan@testtoast.com
[wens@csie.org: Fixed whitespace errors]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2024-10-25 22:55:10 +08:00
Yuanjie Yang
3c0946b6a3 dt-bindings: mmc: Add sdhci compatible for QCS615
Document the sdhci compatible for Qualcomm QCS615 to support
function for emmc and sd card on the Soc.

Signed-off-by: Yuanjie Yang <quic_yuanjiey@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20241023092708.604195-2-quic_yuanjiey@quicinc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-25 16:48:54 +02:00
Steven Price
581d1f8248 drm/panfrost: Remove unused id_mask from struct panfrost_model
The id_mask field of struct panfrost_model has never been used.

Fixes: f3ba91228e ("drm/panfrost: Add initial panfrost driver")
Signed-off-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241025140008.385081-1-steven.price@arm.com
2024-10-25 15:47:13 +01:00
Avri Altman
869d374757 mmc: core: Use GFP_NOIO in ACMD22
While reviewing the SDUC series, Adrian made a comment concerning the
memory allocation code in mmc_sd_num_wr_blocks() - see [1].
Prevent memory allocations from triggering I/O operations while ACMD22
is in progress.

[1] https://lore.kernel.org/linux-mmc/3016fd71-885b-4ef9-97ed-46b4b0cb0e35@intel.com/

Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 051913dada ("mmc_block: do not DMA to stack")
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Cc: stable@vger.kernel.org
Message-ID: <20241021153227.493970-1-avri.altman@wdc.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-25 16:37:26 +02:00
Dmitry Baryshkov
32f71e0eb9 dt-bindings: mmc: sdhci-msm: Add SAR2130P compatible
Document compatible for the SDHCI Controller on SAR2130P platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20241017-sar2130p-mmc-v1-1-c84da16a001e@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-10-25 16:37:01 +02:00