If changed is '0', then the ieee80211_hw_config takes no
action, so just remove the call in
__ieee809211_recalc_txpower()
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://patch.msgid.link/20241010204036.1219896-1-greearb@candelatech.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is one of only three -Wenum-compare-conditional warnings we get
in randconfig builds:
drivers/net/wireless/intel/iwlwifi/mvm/sta.c:4331:17: error: conditional expression between different enumeration types ('enum iwl_fw_sta_type' and 'enum iwl_sta_type') [-Werror,-Wenum-compare-conditional]
4331 | u32 type = mld ? STATION_TYPE_PEER : IWL_STA_LINK;
| ^ ~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~
This is a false positive since the code works as intended, but the
warning is otherwise sensible, so slightly rewrite it in order to
not trigger the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20241018151841.3821671-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Add new debug only parameters to override the default IPC and boot
timeout, these are only available if CONFIG_SND_SOC_SOF_DEBUG is
enabled, only for developers.
The second patch moves the firmware, topology name/path and IPC
version overrides from acpi/pci/of platform code to core and markes
the platform parameters deprecated, to be removed in few kernel
cycles.
There is really no point of duplicating these overrides as they
are not platform dependent.
The current flow in _ieee80211_set_active_links() does not align with the
operational requirements of drivers that groups multiple hardware
under a single wiphy. These drivers (e.g ath12k) rely on channel
assignment to determine the appropriate hardware for each link. Without
this, the drivers cannot correctly establish the link interface.
Currently in _ieee80211_set_active_links(), after calling
drv_change_vif_links() on the driver, the state of all connected stations
is updated via drv_change_sta_links(). This is followed by handling keys
in the links, and finally, assigning the channel to the links.
Consequently, drv_change_sta_links() prompts drivers to create the station
entry at their level and within their firmware. However, since channels
have not yet been assigned to links at this stage, drivers have not
created the necessary link interface for establishing link stations,
leading to failures in activating the links.
Therefore, re-order the logic so that after drv_change_vif_links() and
removing the old links, channels are assigned to newly added links.
Following this, the flow proceeds to station handling.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20241001085034.2745669-1-quic_adisi@quicinc.com
[Johannes: fix iwlwifi to deal with the changes]
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The panel fitter lives inside the pipe and so would affect all cloned
outputs. However the relevant properties (scaling mode, TV margins)
are per-connector so we could end up with a situation where each cloned
output wants a different pfit configuration. Let's just reject pfit
usage with cloning entirely.
Currently not an issue as we don't yet expose the TV margin
properties, but if/when we add those to HDMI we could end up
in this situation. For eDP/DP we don't support cloning anyyway.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016143134.26903-6-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Transcoder hdisplay/vdisplay have documented minimum limits
when using the panel fitter. Enforce those limits for all
pre-SKL platforms. SKL+ handles everything in the unified
scaler code instead.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016143134.26903-5-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
In sdei_device_freeze(), the input parameter of cpuhp_remove_state() is
passed as 'sdei_entry_point' by mistake. Change it to 'sdei_hp_state'.
Fixes: d2c48b2387 ("firmware: arm_sdei: Fix sleep from invalid context BUG")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/r/20241016084740.183353-1-wangxiongfeng2@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Gen2/3 pfit doesn't support downscaling at all, so reject it.
On i965+ downscaling is supported by the hardware (max scale
factor < 2.0), but as downscaling increases the effective
pixel rate we can't safely allow it unless
intel_crtc_compute_pixel_rate() gets fixed. Probably the
best solution would be to calculate (at least an
apporiximate) pfit destination window and use
ilk_pipe_pixel_rate() for all platforms. For now reject
downscaling on all gmch platforms.
The intel ddx has a similar check for this in userspace,
modesetting ddx does not. And presumably wayland compositors
also do not make such assumptions in userspace.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016143134.26903-4-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
The ILK-BDW panel fitter imposes extra limits on the maximum
pipe source size we can use. Check for that.
Only HSW/BDW are really affected by this since on older platforms
the max hdisplay/vdisplay matches the max PIPESRC. But we'll
put in the limits for all the platforms just to keep things
clear.
Note that pch_panel_fitting() is also used on SKL+, but we'll
skip the checks for those as it's all supposed to be handled
in the unified scaler code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241016143134.26903-2-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
This reverts commit 7aed6a2c51.
Now that __no_sanitize_address attribute is fixed for KASAN_SW_TAGS with
GCC, allow re-enabling KASAN_SW_TAGS with GCC.
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrew Pinski <pinskia@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://lore.kernel.org/r/20241021120013.3209481-2-elver@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Devicetree binding has documented the node name for UFS controllers as
'ufshc'. So let's use it instead of 'ufs' which is for the UFS devices.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20240514-ufs-nodename-fix-v1-2-4c55483ac401@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the i.MX9 DDR controller, which has different register
offsets and some function changes compared to the existing fsl_ddr
controller. The ECC and error injection functions are almost the same,
so update and reuse the driver for i.MX9. Add a special type 'TYPE_IMX9'
specifically for the i.MX9 controller to distinguish the differences.
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20241016-imx95_edac-v3-5-86ae6fc2756a@nxp.com
iMX9 memory controller is similar with other layerscape chips. But some
register layout has a little bit difference, so add new compatible string
'nxp,imx9-memory-controller' for it.
imx9 need two 'reg', one for DDR controller and the other is ECC inject
engine register space. Keep the same restriction for other compatible
string.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241016-imx95_edac-v3-4-86ae6fc2756a@nxp.com
Fix undefined behavior caused by left-shifting a negative value in the
expression:
cap_high ^ (1 << (bad_data_bit - 32))
The variable bad_data_bit ranges from 0 to 63. When it is less than 32,
bad_data_bit - 32 becomes negative, and left-shifting by a negative
value in C is undefined behavior.
Fix this by combining cap_high and cap_low into a 64-bit variable.
[ bp: Massage commit message, simplify error bits handling. ]
Fixes: ea2eb9a8b6 ("EDAC, fsl-ddr: Separate FSL DDR driver from MPC85xx")
Signed-off-by: Priyanka Singh <priyanka.singh@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241016-imx95_edac-v3-3-86ae6fc2756a@nxp.com
The display node in mt8195.dtsi was triggering a CHECK_DTBS error due
to an excessively long 'clocks' property:
display@14f06000: clocks: [[31, 14], [31, 43], [31, 44]] is too long
To resolve this issue, the constraints for 'clocks' and
other properties within the subschemas will be reinforced.
Fixes: 739058a9c5 ("dt-bindings: display: mediatek: split: add compatible for MT8195")
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Moudy Ho <moudy.ho@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20241007022834.4609-1-moudy.ho@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
As struct file_operations is really big, but (most) debugfs
files only use simple_open, read, write and perhaps seek, and
don't need anything else, this wastes a lot of space for NULL
pointers.
Add a struct debugfs_short_fops and some bookkeeping code in
debugfs so that users can use that with debugfs_create_file()
using _Generic to figure out which function to use.
Converting mac80211 to use it where possible saves quite a
bit of space:
1010127 205064 1220 1216411 128f9b net/mac80211/mac80211.ko (before)
981199 205064 1220 1187483 121e9b net/mac80211/mac80211.ko (after)
-------
-28928 = ~28KiB
With a marginal space cost in debugfs:
8701 550 16 9267 2433 fs/debugfs/inode.o (before)
25233 325 32 25590 63f6 fs/debugfs/file.o (before)
8914 558 16 9488 2510 fs/debugfs/inode.o (after)
25380 325 32 25737 6489 fs/debugfs/file.o (after)
---------------
+360 +8
(All on x86-64)
A simple spatch suggests there are more than 300 instances,
not even counting the ones hidden in macros like in mac80211,
that could be trivially converted, for additional savings of
about 240 bytes for each.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20241022151838.26f9925fb959.Ia80b55e934bbfc45ce0df42a3233d34b35508046@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The GCM algorithm implementation in the kernel assumes that
a 12-byte IV is passed, not the actual J_0 from the GCM spec.
Don't rename, that'd be messy, but also don't fill the bytes
beyond the IV that aren't used, since otherwise it looks as
though j_0[12] is used uninitialized.
Link: https://patch.msgid.link/20241021151414.798ceb7a5896.Ic57751edad228d56865ecf7433fef469e5e0a4aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Refactor the BW limitation check to a more general format when
parsing CSA. Also, the original BW check did not account for BW
less than 160 MHz.
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://patch.msgid.link/20241009121812.2419-1-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a monitor interface has an assigned channel (only happens with the
NO_VIRTUAL_MONITOR feature), only pass packets received on that channel.
This is useful for monitoring on multiple channels at the same time using
multiple monitor interfaces.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/1bbe55107ba0f2e62ea90f305faeb7ba9247ef29.1728462320.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is useful for multi-radio devices that are capable of monitoring on
multiple channels simultanenously. When this flag is set, each monitor
interface is passed to the driver individually and can have a configured
channel.
The vif mac address for non-active monitor interfaces is cleared, in order
to allow the driver to tell them apart from active ones.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/3c55505ee0cf0a5f141fbcb30d1e8be8d9f40373.1728462320.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With multi-radio devices, each radio typically gets a fixed set of antennas.
In order to be able to disable specific antennas for some radios, user space
needs to know which antenna mask bits are assigned to which radio.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/e0a26afa2c88eaa188ec96ec6d17ecac4e827641.1728462320.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This allows users to prevent a vif from affecting radios other than the
configured ones. This can be useful in cases where e.g. an AP is running
on one radio, and triggering a scan on another radio should not disturb it.
Changing the allowed radios list for a vif is supported, but only while
it is down.
While it is possible to achieve the same by always explicitly specifying
a frequency list for scan requests and ensuring that the wrong channel/band
is never accidentally set on an unrelated interface, this change makes
multi-radio wiphy setups a lot easier to deal with for CLI users.
By itself, this patch only enforces the radio mask for scanning requests
and remain-on-channel. Follow-up changes build on this to limit configured
frequencies.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://patch.msgid.link/eefcb218780f71a1549875d149f1196486762756.1728462320.git-series.nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We require a message, but the macros shouldn't require a
formatted message, a constant one can be fine. Change the
macros to support that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.96e8554cb7a2.I0e06d8fd49f86bd4e9e216fc2265c43d7e78a095@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a function for getting the error status and error
code for given error table.
Remove a static function of same purpose from mvm/d3.c
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.610a38614ce6.Iab5f795bc30ce5d08550cff1772fe051527bcb95@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When resuming it can happen that the TX queue is flushed even though it
is entirely empty. This is completely fine and should not be causing an
error level log message.
Return early from reclaim in that case.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.7c152d0820be.I3ae39a9a470f47bfe4405f2e5c30327e157eb55f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When checking if extra LTF should be disabled, we don't need to check the
the HW revision.
sband_eht_cap will be NULL if eht_capa::has_eht is false,
and that will be the case for the HWs that don't support EHT.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.78b0adbb7b50.I630a64f06ca86baecde6a2a238733b7df3cf70e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The flags_mask field is becoming reserved, and a new bandwidth
request is being added for RX OMI purposes. Support the new API
version as preparation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.437c6573df3c.I03612cb6cf47b12038c1db11b95a554cdea714e9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It can happen that more errors occur after a firmware assertion. In that
case, having another log message after the restart has completed makes
it easier to see which errors where still part of the restart flow.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.d205dd88fb9d.Ic43a1b399f59d2ab1018ff2f9e6e3a0324692660@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>