Ivan Vecera says:
====================
dpll: zl3073x: Add misc features
Add several new features missing in initial submission:
* Embedded sync for both pin types
* Phase offset reporting for connected input pin
* Selectable phase offset monitoring (aka all inputs phase monitor)
* Phase adjustments for both pin types
* Fractional frequency offset reporting for input pins
Everything was tested on Microchip EVB-LAN9668 EDS2 development board.
====================
Link: https://patch.msgid.link/20250715144633.149156-1-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Adds support to get fractional frequency offset for input pins. Implement
the appropriate callback and function that periodicaly performs reference
frequency measurement and notifies DPLL core about changes.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Prathosh Satish <prathosh.satish@microchip.com>
Co-developed-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20250715144633.149156-6-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support to get/set phase adjustment for both input and output pins.
The phase adjustment is implemented using reference and output phase
offset compensation registers. For input pins the adjustment value can
be arbitrary number but for outputs the value has to be a multiple
of half synthesizer clock cycles.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Prathosh Satish <prathosh.satish@microchip.com>
Co-developed-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20250715144633.149156-5-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement phase offset monitor feature to allow a user to monitor
phase offsets across all available inputs.
The device firmware periodically performs phase offsets measurements for
all available DPLL channels and input references. The driver can ask
the firmware to fill appropriate latch registers with measured values.
There are 2 sets of latch registers for phase offsets reporting:
1) DPLL-to-connected-ref: up to 5 registers that contain values for
phase offset between particular DPLL channel and its connected input
reference.
2) selected-DPLL-to-ref: 10 registers that contain values for phase
offsets between selected DPLL channel and all available input
references.
Both are filled with single read request so the driver can read
DPLL-to-connected-ref phase offset for all DPLL channels at once.
This was implemented in the previous patch.
To read selected-DPLL-to-ref registers for all DPLLs a separate read
request has to be sent to device firmware for each DPLL channel.
To implement phase offset monitor feature:
* Extend zl3073x_ref_phase_offsets_update() to select given DPLL channel
in phase offset read request. The caller can set channel==-1 if it
will not read Type2 registers.
* Use this extended function to update phase offset latch registers
during zl3073x_dpll_changes_check() call if phase monitor is enabled
* Extend zl3073x_dpll_pin_phase_offset_check() to check phase offset
changes for all available input references
* Extend zl3073x_dpll_input_pin_phase_offset_get() to report phase
offset values for all available input references
* Implement phase offset monitor callbacks to enable/disable this
feature
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Prathosh Satish <prathosh.satish@microchip.com>
Co-developed-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20250715144633.149156-4-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support to get phase offset for the connected input pin. Implement
the appropriate callback and function that performs DPLL to connected
reference phase error measurement and notifies DPLL core about changes.
The measurement is performed internally by device on background 40 times
per second but the measured value is read each second and compared with
previous value.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Prathosh Satish <prathosh.satish@microchip.com>
Co-developed-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20250715144633.149156-3-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support to get/set embedded sync for both input and output pins.
The DPLL is able to lock on input reference when the embedded sync
frequency is 1 PPS and pulse width 25%. The esync on outputs are more
versatille and theoretically supports any esync frequency that divides
current output frequency but for now support the same that supported on
input pins (1 PPS & 25% pulse).
Note that for the output pins the esync divisor shares the same register
used for N-divided signal formats. Due to this the esync cannot be
enabled on outputs configured with one of the N-divided signal formats.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Prathosh Satish <prathosh.satish@microchip.com>
Co-developed-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20250715144633.149156-2-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- cfg80211: fix double-free introduced earlier
- mac80211: fix RCU iteration in CSA
- iwlwifi: many cleanups (unused FW APIs, PCIe code, WoWLAN)
- mac80211: some work around how FIPS affects wifi, which was
wrong (RC4 is used by TKIP, not only WEP)
- cfg/mac80211: improvements for unsolicated probe response
handling
-----BEGIN PGP SIGNATURE-----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=g8VQ
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-07-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Another set of changes, notably:
- cfg80211: fix double-free introduced earlier
- mac80211: fix RCU iteration in CSA
- iwlwifi: many cleanups (unused FW APIs, PCIe code, WoWLAN)
- mac80211: some work around how FIPS affects wifi, which was
wrong (RC4 is used by TKIP, not only WEP)
- cfg/mac80211: improvements for unsolicated probe response
handling
* tag 'wireless-next-2025-07-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (64 commits)
wifi: cfg80211: fix double free for link_sinfo in nl80211_station_dump()
wifi: cfg80211: fix off channel operation allowed check for MLO
wifi: mac80211: use RCU-safe iteration in ieee80211_csa_finish
wifi: mac80211_hwsim: Update comments in header
wifi: mac80211: parse unsolicited broadcast probe response data
wifi: cfg80211: parse attribute to update unsolicited probe response template
wifi: mac80211: don't use TPE data from assoc response
wifi: mac80211: handle WLAN_HT_ACTION_NOTIFY_CHANWIDTH async
wifi: mac80211: simplify __ieee80211_rx_h_amsdu() loop
wifi: mac80211: don't mark keys for inactive links as uploaded
wifi: mac80211: only assign chanctx in reconfig
wifi: mac80211_hwsim: Declare support for AP scanning
wifi: mac80211: clean up cipher suite handling
wifi: mac80211: don't send keys to driver when fips_enabled
wifi: cfg80211: Fix interface type validation
wifi: mac80211: remove ieee80211_link_unreserve_chanctx() return value
wifi: mac80211: don't unreserve never reserved chanctx
mwl8k: Add missing check after DMA map
wifi: mac80211: make VHT opmode NSS ignore a debug message
wifi: iwlwifi: remove support of several iwl_ppag_table_cmd versions
...
====================
Link: https://patch.msgid.link/20250717094610.20106-47-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A relatively large set of changes, but most of them are quirk
information for various x86 systems. There is one more substantial fix
for a NULL pointer dereference when removing the AVS driver, plus one
for Kconfig dependencies.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmh46Y4ACgkQJNaLcl1U
h9AGZAf/QywROx8gGKCXUxQAvZb+/Dag3qNoBq/TZ2/bope+3QLwcq6IB2hP5G1D
YedKMxVBdkwCrIy/OpZcrhPFLG6YgL+KOQDZd+hs3QldmEUeOQ7u3YHxJ0WeT9yG
xLWAvYVRajom04KpZqHbbsPfJUa7QXVdpfzh0YhtJG83Q0ZCx6xwjcAL3GRS6Egb
p4al2CzYrs+4AImPFWMWmym1aS+88nM9yprRLQn+lVvWEarjw/hU0ikI5VrivJv5
RKIaIOKgCPLJ10RKHdaBkZOKMbC276Px1YU8VcDj8MnWsRisnE0ViT5U/ylxBLMP
9/ajgO6yxG6R7BG7AJAlGKAhiIpUTA==
=6U78
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.16-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
A relatively large set of changes, but most of them are quirk
information for various x86 systems. There is one more substantial fix
for a NULL pointer dereference when removing the AVS driver, plus one
for Kconfig dependencies.
- ath12k performance regression from -rc1
- cfg80211 counted_by() removal for scan request
as it doesn't match usage and keeps complaining
- iwlwifi crash with certain older devices
- iwlwifi missing an error path unlock
- iwlwifi compatibility with certain BIOS updates
-----BEGIN PGP SIGNATURE-----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=yzt3
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-07-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Couple of fixes:
- ath12k performance regression from -rc1
- cfg80211 counted_by() removal for scan request
as it doesn't match usage and keeps complaining
- iwlwifi crash with certain older devices
- iwlwifi missing an error path unlock
- iwlwifi compatibility with certain BIOS updates
* tag 'wireless-2025-07-17' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: Fix botched indexing conversion
wifi: cfg80211: remove scan request n_channels counted_by
wifi: ath12k: Fix packets received in WBM error ring with REO LUT enabled
wifi: iwlwifi: mask reserved bits in chan_state_active_bitmap
wifi: iwlwifi: pcie: fix locking on invalid TOP reset
====================
Link: https://patch.msgid.link/20250717091831.18787-5-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If we reload the GuC due to suspend/resume or GT reset then we
have to resend not only any VFs provisioning data, but also PF
configuration, like scheduling parameters (EQ, PT), as otherwise
GuC will continue to use default values.
Fixes: 411220808c ("drm/xe/pf: Restart VFs provisioning after GT reset")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250711193316.1920-3-michal.wajdeczko@intel.com
(cherry picked from commit 1c38dd6afa)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
As part of the resume or GT reset, the PF driver schedules work
which is then used to complete restarting of the SR-IOV support,
including resending to the GuC configurations of provisioned VFs.
However, in case of short delay between those two actions, which
could be seen by triggering a GT reset on the suspened device:
$ echo 1 > /sys/kernel/debug/dri/0000:00:02.0/gt0/force_reset
this PF worker might be still busy, which lead to errors due to
just stopped or disabled GuC CTB communication:
[ ] xe 0000:00:02.0: [drm:xe_gt_resume [xe]] GT0: resumed
[ ] xe 0000:00:02.0: [drm] GT0: trying reset from force_reset_show [xe]
[ ] xe 0000:00:02.0: [drm] GT0: reset queued
[ ] xe 0000:00:02.0: [drm] GT0: reset started
[ ] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel stopped
[ ] xe 0000:00:02.0: [drm:guc_ct_send_recv [xe]] GT0: H2G request 0x5503 canceled!
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF1 12 config KLVs (-ECANCELED)
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF1 configuration (-ECANCELED)
[ ] xe 0000:00:02.0: [drm:guc_ct_change_state [xe]] GT0: GuC CT communication channel disabled
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF2 12 config KLVs (-ENODEV)
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push VF2 configuration (-ENODEV)
[ ] xe 0000:00:02.0: [drm] GT0: PF: Failed to push 2 of 2 VFs configurations
[ ] xe 0000:00:02.0: [drm:pf_worker_restart_func [xe]] GT0: PF: restart completed
While this VFs reprovisioning will be successful during next spin
of the worker, to avoid those errors, make sure to cancel restart
worker if we are about to trigger next reset.
Fixes: 411220808c ("drm/xe/pf: Restart VFs provisioning after GT reset")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://lore.kernel.org/r/20250711193316.1920-2-michal.wajdeczko@intel.com
(cherry picked from commit 9f50b729dd)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The check would fail if the address is unaligned, but not when
accounting the offset. Instead of `buf | offset` it should have
been `buf + offset`. To make it more readable and also drop the
uintptr_t, just use the IS_ALIGNED() macro.
Fixes: 270172f64b ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250710-migrate-aligned-v1-1-44003ef3c078@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 81e139db69)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
We need the topology to determine GT page fault queue size, move page
fault init after topology init.
Cc: stable@vger.kernel.org
Fixes: 3338e4f90c ("drm/xe: Use topology to determine page fault queue size")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250710191208.1040215-1-matthew.brost@intel.com
(cherry picked from commit beb72acb5b)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
MOCS uc_index is used even before it is initialized in the following
callstack
guc_prepare_xfer()
__xe_guc_upload()
xe_guc_min_load_for_hwconfig()
xe_uc_init_hwconfig()
xe_gt_init_hwconfig()
Do MOCS index initialization earlier in the device probe.
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Ravi Kumar Vodapalli <ravi.kumar.vodapalli@intel.com>
Link: https://lore.kernel.org/r/20250520142445.2792824-1-balasubramani.vivekanandan@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 241cc827c0)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
-----BEGIN PGP SIGNATURE-----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=5X7Y
-----END PGP SIGNATURE-----
Merge tag 'nf-25-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net:
1) Three patches to enhance conntrack selftests for resize and clash
resolution, from Florian Westphal.
2) Expand nft_concat_range.sh selftest to improve coverage from error
path, from Florian Westphal.
3) Hide clash bit to userspace from netlink dumps until there is a
good reason to expose, from Florian Westphal.
4) Revert notification for device registration/unregistration for
nftables basechains and flowtables, we decided to go for a better
way to handle this through the nfnetlink_hook infrastructure which
will come via nf-next, patch from Phil Sutter.
5) Fix crash in conntrack due to race related to SLAB_TYPESAFE_BY_RCU
that results in removing a recycled object that is not yet in the
hashes. Move IPS_CONFIRM setting after the object is in the hashes.
From Florian Westphal.
netfilter pull request 25-07-17
* tag 'nf-25-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_conntrack: fix crash due to removal of uninitialised entry
Revert "netfilter: nf_tables: Add notifications for hook changes"
netfilter: nf_tables: hide clash bit from userspace
selftests: netfilter: nft_concat_range.sh: send packets to empty set
selftests: netfilter: conntrack_resize.sh: also use udpclash tool
selftests: netfilter: add conntrack clash resolution test case
selftests: netfilter: conntrack_resize.sh: extend resize test
====================
Link: https://patch.msgid.link/20250717095808.41725-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The delay that we are waiting on in brcm_pcie_start_link() is
PCIE_T_RRS_READY_MS, use it.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
[mani: Removed the redundant comment]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250624231923.990361-3-florian.fainelli@broadcom.com
Nicolas indicated a long time back that he would not have the bandwidth
and indeed, has not provided any review or feedback since.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250624231923.990361-2-florian.fainelli@broadcom.com
After we do the modification on the host side, ensure we write the
result back to VRAM and not the other way around, otherwise the
modification will be lost if treated like a read.
Fixes: 270172f64b ("drm/xe: Update xe_ttm_access_memory to use GPU for non-visible access")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250710134128.800756-2-matthew.auld@intel.com
(cherry picked from commit c12fe703ca)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Skipping TLB invalidations on VF causing unrecoverable
faults. Probable reason for skipping TLB invalidations
on SRIOV could be lack of support for instruction
MI_FLUSH_DW_STORE_INDEX. Add back TLB flush with some
additional handling.
Helps in resolving,
[ 704.913454] xe 0000:00:02.1: [drm:pf_queue_work_func [xe]]
ASID: 0
VFID: 0
PDATA: 0x0d92
Faulted Address: 0x0000000002fa0000
FaultType: 0
AccessType: 1
FaultLevel: 0
EngineClass: 3 bcs
EngineInstance: 8
[ 704.913551] xe 0000:00:02.1: [drm:pf_queue_work_func [xe]] Fault response: Unsuccessful -22
V2:
- Use Xmas tree (MichalW)
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Fixes: 97515d0b3e ("drm/xe/vf: Don't emit access to Global HWSP if VF")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250710045945.1023840-1-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit b528e896fa)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Currently all paths that set err and then check it for an error
perform immediate returns, hence err always zero at the end of
the function _mlx5r_umr_zap_mkey. The return expression
err ? err : nblocks has a redundant check on the err since err
is always zero, so just return nblocks instead.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://patch.msgid.link/20250717112108.4036171-1-colin.i.king@gmail.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Commit 2df7168717 ("dm: Always split write BIOs to zoned device
limits") updates the device-mapper driver to perform splits for the
write BIOs. However, it did not address the cases where DM targets do
not emulate zone append, such as in the cases of dm-linear or dm-flakey.
For these targets, when the write BIOs span across zone boundaries, they
trigger WARN_ON_ONCE(bio_straddles_zones(bio)) in
blk_zone_wplug_handle_write(). This results in I/O errors. The errors
are reproduced by running blktests test case zbd/004 using zoned
dm-linear or dm-flakey devices.
To avoid the I/O errors, handle the write BIOs regardless whether DM
targets emulate zone append or not, so that all write BIOs are split at
zone boundaries. For that purpose, drop the check for zone append
emulation in dm_zone_bio_needs_split(). Its argument 'md' is no longer
used then drop it also.
Fixes: 2df7168717 ("dm: Always split write BIOs to zoned device limits")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Link: https://lore.kernel.org/r/20250717103539.37279-1-shinichiro.kawasaki@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The atomic write unit max value is limited by any stacked device stripe
size.
It is required that the atomic write unit is a power-of-2 factor of the
stripe size.
Currently we use io_min limit to hold the stripe size, and check for a
io_min <= SECTOR_SIZE when deciding if we have a striped stacked device.
Nilay reports that this causes a problem when the physical block size is
greater than SECTOR_SIZE [0].
Furthermore, io_min may be mutated when stacking devices, and this makes
it a poor candidate to hold the stripe size. Such an example (of when
io_min may change) would be when the io_min is less than the physical
block size.
Use chunk_sectors to hold the stripe size, which is more appropriate.
[0] https://lore.kernel.org/linux-block/888f3b1d-7817-4007-b3b3-1a2ea04df771@linux.ibm.com/T/#mecca17129f72811137d3c2f1e477634e77f06781
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250711105258.3135198-7-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Same as done for raid0, set chunk_sectors limit to appropriately set the
atomic write size limit.
Setting chunk_sectors limit in this way overrides the stacked limit
already calculated based on the bottom device limits. This is ok, as
when any bios are sent to the bottom devices, the block layer will still
respect the bottom device chunk_sectors.
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250711105258.3135198-6-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Same as done for raid0, set chunk_sectors limit to appropriately set the
atomic write size limit.
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250711105258.3135198-5-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently we use min io size as the chunk size when deciding on the
atomic write size limits - see blk_stack_atomic_writes_head().
The limit min_io size is not a reliable value to store the chunk size, as
this may be mutated by the block stacking code. Such an example would be
for the min io size less than the physical block size, and the min io size
is raised to the physical block size - see blk_stack_limits().
The block stacking limits will rely on chunk_sectors in future,
so set this value (to the chunk size).
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250711105258.3135198-4-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently we just ensure that a non-zero value in chunk_sectors aligns
with any atomic write boundary, as the blk boundary functionality uses
both these values.
However it is also improper to have atomic write unit max > chunk_sectors
(for non-zero chunk_sectors), as this would lead to splitting of atomic
write bios (which is disallowed).
Sanitize atomic write unit max against chunk_sectors to avoid any
potential problems.
Fixes: d00eea91de ("block: Add extra checks in blk_validate_atomic_write_limits()")
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250711105258.3135198-3-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Relocate the function max_pow_of_two_factor() to common ilog2.h from the
xfs code, as it will be used elsewhere.
Also simplify the function, as advised by Mikulas Patocka.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250711105258.3135198-2-john.g.garry@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Have nvmet_req_init() and req->execute() complete failed commands.
Description of the problem:
nvmet_req_init() calls __nvmet_req_complete() internally upon failure,
e.g., unsupported opcode, which calls the "queue_response" callback,
this results in nvmet_pci_epf_queue_response() being called, which will
call nvmet_pci_epf_complete_iod() if data_len is 0 or if dma_dir is
different from DMA_TO_DEVICE. This results in a double completion as
nvmet_pci_epf_exec_iod_work() also calls nvmet_pci_epf_complete_iod()
when nvmet_req_init() fails.
Steps to reproduce:
On the host send a command with an unsupported opcode with nvme-cli,
For example the admin command "security receive"
$ sudo nvme security-recv /dev/nvme0n1 -n1 -x4096
This triggers a double completion as nvmet_req_init() fails and
nvmet_pci_epf_queue_response() is called, here iod->dma_dir is still
in the default state of "DMA_NONE" as set by default in
nvmet_pci_epf_alloc_iod(), so nvmet_pci_epf_complete_iod() is called.
Because nvmet_req_init() failed nvmet_pci_epf_complete_iod() is also
called in nvmet_pci_epf_exec_iod_work() leading to a double completion.
This not only sends two completions to the host but also corrupts the
state of the PCI NVMe target leading to kernel oops.
This patch lets nvmet_req_init() and req->execute() complete all failed
commands, and removes the double completion case in
nvmet_pci_epf_exec_iod_work() therefore fixing the edge cases where
double completions occurred.
Fixes: 0faa0fe6f9 ("nvmet: New NVMe PCI endpoint function target driver")
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Update the nvme_tcp_start_tls() function to use dev_err() instead of
dev_dbg() when a TLS error is detected. This ensures that handshake
failures are visible by default, aiding in debugging.
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Notable changes:
- Use "an NVMe" instead of "a NVMe" throughout the document
- Fix incorrect phrasing such as "will is discoverable" -> "is
discoverable"
- Ensure consistent and proper article usage for clarity.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Correct a typo error in the NVMe status code constant from
NVME_SC_SELT_TEST_IN_PROGRESS to NVME_SC_SELF_TEST_IN_PROGRESS to
accurately reflect its meaning.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Remove the unnecessary ret = -EMFILE; assignment since it is immediately
overwritten by the result of nvmet_bdev_ns_enable() The initial value
(-EMFILE) is redundant because it has no effect on the code logic or
outcome.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Correct the error log to print ctrl->io_cqes instead of incorrectly using
ctrl->io_sqes for the io cqes size check.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This commit fixes several typos and grammatical issues across various
nvme host driver files:
- correct "glace" to "glance" in a comment in apple.c
- fix "Idependent" to "Independent" in core.c
- change "unsucceesful" to "unsuccessful", "they blk-mq" to "the blk-mq",
- fix "terminaed" to "terminated" and other grammar in fc.c
- update "O's" to "0's" to clarify meaning in nvme.h
- fix a function name reference in a comment in zns.c:
*_transter_len() -> *_transfer_len().
- fix sysfs_emit() output format in pci.c (replace x%08x with 0x%08x)
These changes improve the code readability and documentation consistency
across the NVMe driver.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Synopsys DesignWare XPCS CSR clock is optional,
so it is better to use devm_clk_get_optional
instead of devm_clk_get.
Signed-off-by: Jack Ping CHNG <jchng@maxlinear.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250715021956.3335631-1-jchng@maxlinear.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit e8afa1557f.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc7 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
v3:
- cc stable
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Cc: <stable@vger.kernel.org> # v6.15+
Link: https://lore.kernel.org/r/20250715155934.150656-8-tzimmermann@suse.de
This reverts commit 1a148af060.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc7 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
v3:
- cc stable
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Cc: <stable@vger.kernel.org> # v6.15+
Link: https://lore.kernel.org/r/20250715155934.150656-7-tzimmermann@suse.de
This reverts commit cce16fcd74.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc7 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
v3:
- cc stable
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Cc: <stable@vger.kernel.org> # v6.15+
Link: https://lore.kernel.org/r/20250715155934.150656-6-tzimmermann@suse.de
This reverts commit f83a9b8c7f.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc7 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
v3:
- cc stable
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Cc: <stable@vger.kernel.org> # v6.15+
Link: https://lore.kernel.org/r/20250715155934.150656-5-tzimmermann@suse.de
This reverts commit e91eb3ae41.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc7 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/r/20250715155934.150656-4-tzimmermann@suse.de
This reverts commit aec8a40228.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc7 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/r/20250715155934.150656-3-tzimmermann@suse.de
This reverts commit 415cb45895.
The dma_buf field in struct drm_gem_object is not stable over the
object instance's lifetime. The field becomes NULL when user space
releases the final GEM handle on the buffer object. This resulted
in a NULL-pointer deref.
Workarounds in commit 5307dce878 ("drm/gem: Acquire references on
GEM handles for framebuffers") and commit f6bfc9afc7 ("drm/framebuffer:
Acquire internal references on GEM handles") only solved the problem
partially. They especially don't work for buffer objects without a DRM
framebuffer associated.
Hence, this revert to going back to using .import_attach->dmabuf.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/r/20250715155934.150656-3-tzimmermann@suse.de
Tony Nguyen says:
====================
Add RDMA support for Intel IPU E2000 in idpf
Tatyana Nikolova says:
This idpf patch series is the second part of the staged submission for
introducing RDMA RoCEv2 support for the IPU E2000 line of products,
referred to as GEN3.
To support RDMA GEN3 devices, the idpf driver uses common definitions
of the IIDC interface and implements specific device functionality in
iidc_rdma_idpf.h.
The IPU model can host one or more logical network endpoints called
vPorts per PCI function that are flexibly associated with a physical
port or an internal communication port.
Other features as it pertains to GEN3 devices include:
* MMIO learning
* RDMA capability negotiation
* RDMA vectors discovery between idpf and control plane
These patches are split from the submission "Add RDMA support for Intel
IPU E2000 (GEN3)" [1]. The patches have been tested on a range of hosts
and platforms with a variety of general RDMA applications which include
standalone verbs (rping, perftest, etc.), storage and HPC applications.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
[1] https://lore.kernel.org/all/20240724233917.704-1-tatyana.e.nikolova@intel.com/
This idpf patch series is the second part of the staged submission for
introducing RDMA RoCEv2 support for the IPU E2000 line of products,
referred to as GEN3.
To support RDMA GEN3 devices, the idpf driver uses common definitions
of the IIDC interface and implements specific device functionality in
iidc_rdma_idpf.h.
The IPU model can host one or more logical network endpoints called
vPorts per PCI function that are flexibly associated with a physical
port or an internal communication port.
Other features as it pertains to GEN3 devices include:
* MMIO learning
* RDMA capability negotiation
* RDMA vectors discovery between idpf and control plane
These patches are split from the submission "Add RDMA support for Intel
IPU E2000 (GEN3)" [1]. The patches have been tested on a range of hosts
and platforms with a variety of general RDMA applications which include
standalone verbs (rping, perftest, etc.), storage and HPC applications.
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
[1] https://lore.kernel.org/all/20240724233917.704-1-tatyana.e.nikolova@intel.com/
IWL reviews:
v3: https://lore.kernel.org/all/20250708210554.1662-1-tatyana.e.nikolova@intel.com/
v2: https://lore.kernel.org/all/20250612220002.1120-1-tatyana.e.nikolova@intel.com/
v1 (split from previous series):
https://lore.kernel.org/all/20250523170435.668-1-tatyana.e.nikolova@intel.com/
v3: https://lore.kernel.org/all/20250207194931.1569-1-tatyana.e.nikolova@intel.com/
RFC v2: https://lore.kernel.org/all/20240824031924.421-1-tatyana.e.nikolova@intel.com/
RFC: https://lore.kernel.org/all/20240724233917.704-1-tatyana.e.nikolova@intel.com/
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/linux:
idpf: implement get LAN MMIO memory regions
idpf: implement IDC vport aux driver MTU change handler
idpf: implement remaining IDC RDMA core callbacks and handlers
idpf: implement RDMA vport auxiliary dev create, init, and destroy
idpf: implement core RDMA auxiliary dev create, init, and destroy
idpf: use reserved RDMA vectors from control plane
====================
Link: https://patch.msgid.link/20250714181002.2865694-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some build environments for the selftests are not picking up the newly
added AT_HWCAP3 when using the libc headers, even with headers_install
(which we require already for the arm64 selftests). As a quick fix add
local definitions of the constant to tools use it, while auxvec.h is
installed with some toolchains it needs some persuasion to get picked up.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250715-arm64-selftest-bodge-hwcap3-v1-1-541b54bc43bb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Set TAINT_MACHINE_CHECK when SError or Synchronous External Abort (SEA)
interrupts trigger a panic to flag potential hardware faults. This
tainting mechanism aids in debugging and enables correlation of
hardware-related crashes in large-scale deployments.
This change aligns with similar patches[1] that mark machine check
events when the system crashes due to hardware errors.
Link: https://lore.kernel.org/all/20250702-add_tain-v1-1-9187b10914b9@debian.org/ [1]
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250716-vmcore_hw_error-v2-1-f187f7d62aba@debian.org
Signed-off-by: Will Deacon <will@kernel.org>
When application A submits jobs and application B submits a job with a
dependency on A's fence, the normal flow wakes up the scheduler after
processing each job. However, the optimization in
drm_sched_entity_add_dependency_cb() uses a callback that only clears
dependencies without waking up the scheduler.
When application A is killed before its jobs can run, the callback gets
triggered but only clears the dependency without waking up the scheduler,
causing the scheduler to enter sleep state and application B to hang.
Remove the optimization by deleting drm_sched_entity_clear_dep() and its
usage, ensuring the scheduler is always woken up when dependencies are
cleared.
Fixes: 777dbd458c ("drm/amdgpu: drop a dummy wakeup scheduler")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Lin.Cao <lincao12@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250717084453.921097-1-lincao12@amd.com
The firmware on SDM845-based Cheza boards did not provide the same
level of feature support for SMMUs (particularly around the Adreno
GPU integration).
Now that Cheza is being removed from the kernel (almost none exist at
this point in time), retire the entry as well.
Most notably, it's not being marked as deprecated instead, as there is
no indication that any more of those ~7 year old devboards will be
built.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20250716-topic-goodnight_cheza-v2-3-6fa8d3261813@oss.qualcomm.com
Signed-off-by: Will Deacon <will@kernel.org>
Update header inclusions to follow IWYU (Include What You Use)
principle.
Note that kernel.h is discouraged to be included as it's written
at the top of that file.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250708133646.70384-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
