The current code only copies the address for the in path, leaving the out
path address set to 0. This patch corrects the issue by copying the addresses
for both the in and out paths. Before this patch:
# cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec
SA count=2 tx=20
sa[0] tx ipaddr=0.0.0.0
sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1
sa[0] key=0x3167608a ca4f1397 43565909 941fa627
sa[1] rx ipaddr=192.168.0.1
sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1
sa[1] key=0x3167608a ca4f1397 43565909 941fa627
After this patch:
= cat /sys/kernel/debug/netdevsim/netdevsim0/ports/0/ipsec
SA count=2 tx=20
sa[0] tx ipaddr=192.168.0.2
sa[0] spi=0x00000100 proto=0x32 salt=0x0adecc3a crypt=1
sa[0] key=0x3167608a ca4f1397 43565909 941fa627
sa[1] rx ipaddr=192.168.0.1
sa[1] spi=0x00000101 proto=0x32 salt=0x0adecc3a crypt=1
sa[1] key=0x3167608a ca4f1397 43565909 941fa627
Fixes: 7699353da8 ("netdevsim: add ipsec offload testing")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20241010040027.21440-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The err value in mv88e6xxx_region_atu_snapshot is now potentially
uninitialised on return. Initialise err as 0.
Fixes: ada5c3229b ("net: dsa: mv88e6xxx: Add FID map cache")
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241009212319.1045176-1-aryan.srivastava@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When port mirroring is added to a port, the bit position of the source
port, needs to be written to the register ANA_AC_PROBE_PORT_CFG. This
register is replicated for n_ports > 32, and therefore we need to derive
the correct register from the port number.
Before this patch, we wrongly calculate the register from portno /
BITS_PER_BYTE, where the divisor ought to be 32, causing any port >=8 to
be written to the wrong register. We fix this, by using do_div(), where
the dividend is the register, the remainder is the bit position and the
divisor is now 32.
Fixes: 4e50d72b3b ("net: sparx5: add port mirroring implementation")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241009-mirroring-fix-v1-1-9ec962301989@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- fix clock handle leak in probe() error path in gpio-aspeed
- add a dummy register read to ensure the write actually completed
-----BEGIN PGP SIGNATURE-----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=o9yV
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix clock handle leak in probe() error path in gpio-aspeed
- add a dummy register read to ensure the write actually completed
* tag 'gpio-fixes-for-v6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: aspeed: Use devm_clk api to manage clock source
gpio: aspeed: Add the flush write to ensure the write complete.
Radhey Shyam Pandey says:
====================
net: xilinx: emaclite: Adopt clock support
This patchset adds emaclite clock support. AXI Ethernet Lite IP can also
be used on SoC platforms like Zynq UltraScale+ MPSoC which combines
powerful processing system (PS) and user-programmable logic (PL) into
the same device. On these platforms it is mandatory to explicitly enable
IP clocks for proper functionality.
====================
Link: https://patch.msgid.link/1728491303-1456171-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adapt to use the clock framework. Add s_axi_aclk clock from the processor
bus clock domain and make clk optional to keep DTB backward compatibility.
Signed-off-by: Abin Joseph <abin.joseph@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1728491303-1456171-4-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use device managed ethernet device allocation to simplify the error
handling logic. No functional change.
Signed-off-by: Abin Joseph <abin.joseph@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1728491303-1456171-3-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add s_axi_aclk AXI4 clock support. Traditionally this IP was used on
microblaze platforms which had fixed clocks enabled all the time. But
since its a PL IP, it can also be used on SoC platforms like Zynq
UltraScale+ MPSoC which combines processing system (PS) and user
programmable logic (PL) into the same device. On these platforms instead
of fixed enabled clocks it is mandatory to explicitly enable IP clocks
for proper functionality.
So make clock a required property and also define max supported clock
constraints.
Signed-off-by: Abin Joseph <abin.joseph@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/1728491303-1456171-2-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Localio Bugfixes:
* Remove duplicated include in localio.c
* Fix race in NFS calls to nfsd_file_put_local() and nfsd_serv_put()
* Fix Kconfig for NFS_COMMON_LOCALIO_SUPPORT
* Fix nfsd_file tracepoints to handle NULL rqstp pointers
Other Bugfixes:
* Fix program selection loop in svc_process_common
* Fix integer overflow in decode_rc_list()
* Prevent NULL-pointer dereference in nfs42_complete_copies()
* Fix CB_RECALL performance issues when using a large number of delegations
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEnZ5MQTpR7cLU7KEp18tUv7ClQOsFAmcJjjQACgkQ18tUv7Cl
QOvgJw/6A33s+pjyBVLIKT6oMCPkUJeQ4Rhg9Je0Qw/ji0eFkT4Eyd65kRz3T9M/
qRrCfWaUd2dTYcbKQyhuGTlEfICZa9R4I0/Ztk9yvf9xcd1xFXKzTkFekGUVeHQA
OcngDu9psFxhvyzKI8nAHs1ephX/T7TywvTKANMRbeRCYYvVkytAt9YeVMigYZa5
dnchoUdGUdL6B6RXCU/Qhf0A1uYyA4hkk/FTBCPgv+kYx5pnjFq0y/yIIHDzCR3I
+yE1ss3EpVTQgt2Ca/cmDyYXsa7G8G51U7cS5AeIoXfsf1EGtTujowWcBY4oqFEC
ixx58fQe48AqwsP5XDZn8gnsuYH9snnw5rIB0IVqq55/a+XLMupHayyf/iziMV3s
JWgT4gKDyFca2pT+bJ8iWweU+ecRYxKGnh2NydyBiqowogsHZm4uKh0vELvqqkBd
RIjCyIiQVhYBII2jqpjRnxrqhGUT5XO99NQdQIGV0bUjCEP4YAjY4ChfEVcWXhnB
ppyBP+r8N5O77NcVqsVQS26U0/jb9K30LyYl9VT43ank3d+VVtHA5ZqnUflWtwuc
2XiGDvXW9mIvbVraWIZXUNVy39bzRclDf5bx4jeYLnKCMym81rkEIBOvBKQKZTrl
v+1Nhaj+fSw+rFSUm0KPqms0UDiT0Ol7ltu84ifadYqubbSEbqU=
=QBvR
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.12-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
"Localio Bugfixes:
- remove duplicated include in localio.c
- fix race in NFS calls to nfsd_file_put_local() and nfsd_serv_put()
- fix Kconfig for NFS_COMMON_LOCALIO_SUPPORT
- fix nfsd_file tracepoints to handle NULL rqstp pointers
Other Bugfixes:
- fix program selection loop in svc_process_common
- fix integer overflow in decode_rc_list()
- prevent NULL-pointer dereference in nfs42_complete_copies()
- fix CB_RECALL performance issues when using a large number of
delegations"
* tag 'nfs-for-6.12-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: remove revoked delegation from server's delegation list
nfsd/localio: fix nfsd_file tracepoints to handle NULL rqstp
nfs_common: fix Kconfig for NFS_COMMON_LOCALIO_SUPPORT
nfs_common: fix race in NFS calls to nfsd_file_put_local() and nfsd_serv_put()
NFSv4: Prevent NULL-pointer dereference in nfs42_complete_copies()
SUNRPC: Fix integer overflow in decode_rc_list()
sunrpc: fix prog selection loop in svc_process_common
nfs: Remove duplicated include in localio.c
After commit 8d7017fd62 ("blackhole_netdev: use blackhole_netdev to
invalidate dst entries"), blackhole_netdev was introduced to invalidate
dst cache entries on the TX path whenever the cache times out or is
flushed.
When two UDP sockets (sk1 and sk2) send messages to the same destination
simultaneously, they are using the same dst cache. If the dst cache is
invalidated on one path (sk2) while the other (sk1) is still transmitting,
sk1 may try to use the invalid dst entry.
CPU1 CPU2
udp_sendmsg(sk1) udp_sendmsg(sk2)
udp_send_skb()
ip_output()
<--- dst timeout or flushed
dst_dev_put()
ip_finish_output2()
ip_neigh_for_gw()
This results in a scenario where ip_neigh_for_gw() returns -EINVAL because
blackhole_dev lacks an in_dev, which is needed to initialize the neigh in
arp_constructor(). This error is then propagated back to userspace,
breaking the UDP application.
The patch fixes this issue by assigning an in_dev to blackhole_dev for
IPv4, similar to what was done for IPv6 in commit e5f80fcf86 ("ipv6:
give an IPv6 dev to blackhole_netdev"). This ensures that even when the
dst entry is invalidated with blackhole_dev, it will not fail to create
the neigh entry.
As devinet_init() is called ealier than blackhole_netdev_init() in system
booting, it can not assign the in_dev to blackhole_dev in devinet_init().
As Paolo suggested, add a separate late_initcall() in devinet.c to ensure
inet_blackhole_dev_init() is called after blackhole_netdev_init().
Fixes: 8d7017fd62 ("blackhole_netdev: use blackhole_netdev to invalidate dst entries")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/3000792d45ca44e16c785ebe2b092e610e5b3df1.1728499633.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After we made sure no fib_seq_read() handlers needs RTNL anymore,
we can remove RTNL from fib_seq_sum().
Note that after RTNL was dropped, fib_seq_sum() result was possibly
outdated anyway.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241009184405.3752829-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mr_call_vif_notifiers() and mr_call_mfc_notifiers() already
uses WRITE_ONCE() on the write side.
Using RTNL to protect the reads seems a big hammer.
Constify 'struct net' argument of ip6mr_rules_seq_read()
and ipmr_rules_seq_read().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241009184405.3752829-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using RTNL to protect ops->fib_rules_seq reads seems a big hammer.
Writes are protected by RTNL.
We can use READ_ONCE() when reading it.
Constify 'struct net' argument of fib6_tables_seq_read() and
fib6_rules_seq_read().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241009184405.3752829-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using RTNL to protect ops->fib_rules_seq reads seems a big hammer.
Writes are protected by RTNL.
We can use READ_ONCE() when reading it.
Constify 'struct net' argument of fib4_rules_seq_read()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241009184405.3752829-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using RTNL to protect ops->fib_rules_seq reads seems a big hammer.
Writes are protected by RTNL.
We can use READ_ONCE() on readers.
Constify 'struct net' argument of fib_rules_seq_read()
and lookup_rules_ops().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241009184405.3752829-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix rcuog kthread wakeup invocation from softirq context on a CPU
which has been marked offline. This can happen when new callbacks
are enqueued from a softirq on an offline CPU before it calls
rcutree_report_cpu_dead(). When this happens on NOCB configuration,
the rcuog wake-up is deferred through an IPI to an online CPU.
This is done to avoid call into the scheduler which can risk
arming the RT-bandwidth after hrtimers have been migrated out
and disabled. However, doing IPI call from softirq is not allowed
Fix this by forcing deferred rcuog wakeup through the NOCB timer
when the CPU is offline.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSi2tPIQIc2VEtjarIAHS7/6Z0wpQUCZwjWYAAKCRAAHS7/6Z0w
pQ8iAP9vbhWlWuwlfZqQJK8Xb5b0kVx3nJjAin/5pY/lbWV7IgEA1DUzTAZKXU5Z
yZmjM3l9RpMAxLSgevJKoJD+vR0POQA=
=EVin
-----END PGP SIGNATURE-----
Merge tag 'rcu.fixes.6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU fix from Neeraj Upadhyay:
"Fix rcuog kthread wakeup invocation from softirq context on a CPU
which has been marked offline.
This can happen when new callbacks are enqueued from a softirq on an
offline CPU before it calls rcutree_report_cpu_dead(). When this
happens on NOCB configuration, the rcuog wake-up is deferred through
an IPI to an online CPU. This is done to avoid call into the scheduler
which can risk arming the RT-bandwidth after hrtimers have been
migrated out and disabled.
However, doing IPI call from softirq is not allowed: Fix this by
forcing deferred rcuog wakeup through the NOCB timer when the CPU is
offline"
* tag 'rcu.fixes.6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux:
rcu/nocb: Fix rcuog wake-up from offline softirq
Xe3's power well handling is similar to previous platforms, but there
are a few changes that need to be handled to ensure optimal power
management:
- PGB now only depends on PG1, not PG2
- Transcoder B is now in PG1 (was previously in PGB)
- Transcoders C & D are now in PG2 (were previously in PGC/PGD)
- DC states now require PG2 to be off (whereas on Xe2 it could remain
on as a dependency of PGB, although the features inside of it could
not be used).
Bspec: 72519, 68851
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241010224311.50133-4-matthew.s.atwood@intel.com
xe3_lpd display is functionally identical to xe2_lpd for now so reuse
the device description. A separate xe3 definition will be added in the
future if/when new feature flags are required.
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241010224311.50133-2-matthew.s.atwood@intel.com
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZwkZXAAKCRCAXGG7T9hj
vntCAP9pcmYoVLIUtnOhe3HN1nj8Y+QTBmCP0s63sCgifkZMjAD+KmkuE7pkGQ70
j/DPQzmvRoTQfEoByAWI612PUKifBw4=
=bSZK
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.12a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for topology information of Xen PV guests"
* tag 'for-linus-6.12a-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: mark boot CPU of PV guest in MSR_IA32_APICBASE
Masami reported a bug when running function graph tracing then the
function profiler. The following commands would cause a kernel crash:
# cd /sys/kernel/tracing/
# echo function_graph > current_tracer
# echo 1 > function_profile_enabled
In that order. Create a test to test this two to make sure this does not
come back as a regression.
Link: https://lore.kernel.org/172398528350.293426.8347220120333730248.stgit@devnote2
Link: https://lore.kernel.org/all/20241010165235.35122877@gandalf.local.home/
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
'new_map' is allocated using devm_* which takes care of freeing the
allocated data on device removal, call to
.dt_free_map = pinconf_generic_dt_free_map
double frees the map as pinconf_generic_dt_free_map() calls
pinctrl_utils_free_map().
Fix this by using kcalloc() instead of auto-managed devm_kcalloc().
Cc: stable@vger.kernel.org
Fixes: f805e35631 ("pinctrl: nuvoton: Add ma35d1 pinctrl and GPIO driver")
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/20241010205237.1245318-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Found those two while reading the code:
EDGE_TRAGGER -> EDGE_TRIGGER
BOTH_EADGE -> BOTH_EDGES
No functional changes, compile tested only.
Signed-off-by: Marc Ferland <marc.ferland@sonatest.com>
Link: https://lore.kernel.org/20241009151249.2086702-1-marc.ferland@sonatest.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/pinctrl to use .remove(),
with the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/20241007205803.444994-8-u.kleine-koenig@baylibre.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The hashmap__for_each_entry[_safe] is accessing 'map' as a pointer.
But it does without parentheses so passing a static hash map with an
ampersand (like '&slab_hash') will cause compiler warnings due
to unmatched types as '->' operator has a higher precedence.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241011170021.1490836-1-namhyung@kernel.org
Limit the casts to get the mux data and flags from the driver data
pointer with each pin to two inline functions as requested by Andy
during review.
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Drew Fustini <dfustini@tenstorrent.com>
Tested-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/20241011144826.381104-4-emil.renner.berthing@canonical.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When Drew took over the pinctrl driver it seems like he didn't use the
git tree I pointed him at and thus missed some important fixes to the
tables describing valid pinmux settings.
The documentation has a nice overview table of these settings but
unfortunately it doesn't fully match the register descriptions, which
seem to be the correct version.
Fixes: bed5cd6f8a ("pinctrl: Add driver for the T-Head TH1520 SoC")
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Drew Fustini <dfustini@tenstorrent.com>
Tested-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/20241011144826.381104-3-emil.renner.berthing@canonical.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When Drew took over the pinctrl driver he must have changed
all the -ENOTSUPP returns into -EOPNOTSUPP. This subtle change
was most likely not spotted because it was never mentioned in the
changelog of the patchset, but it breaks all the places in the
pin control and GPIO frameworks where -ENOTSUPP is expected.
Fixes: bed5cd6f8a ("pinctrl: Add driver for the T-Head TH1520 SoC")
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Drew Fustini <dfustini@tenstorrent.com>
Tested-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/20241011144826.381104-2-emil.renner.berthing@canonical.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Commit
f69759be25 ("x86/CPU/AMD: Move Zenbleed check to the Zen2 init function")
causes a bit in the DE_CFG MSR to get set erroneously after a microcode late
load.
The microcode late load path calls into amd_check_microcode() and subsequently
zen2_zenbleed_check(). Since the above commit removes the cpu_has_amd_erratum()
call from zen2_zenbleed_check(), this will cause all non-Zen2 CPUs to go
through the function and set the bit in the DE_CFG MSR.
Call into the Zenbleed fix path on Zen2 CPUs only.
[ bp: Massage commit message, use cpu_feature_enabled(). ]
Fixes: f69759be25 ("x86/CPU/AMD: Move Zenbleed check to the Zen2 init function")
Signed-off-by: John Allen <john.allen@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240923164404.27227-1-john.allen@amd.com
Unicode subsystem tree is missing from MAINTAINERS, add it.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
-----BEGIN PGP SIGNATURE-----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=sE7Y
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.12-20241011' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
- Explicitly have a mshot_finished condition for IORING_OP_RECV in
multishot mode, similarly to what IORING_OP_RECVMSG has. This doesn't
fix a bug right now, but it makes it harder to actually have a bug
here if a request takes multiple iterations to finish.
- Fix handling of retry of read/write of !FMODE_NOWAIT files. If they
are pollable, that's all we need.
* tag 'io_uring-6.12-20241011' of git://git.kernel.dk/linux:
io_uring/rw: allow pollable non-blocking attempts for !FMODE_NOWAIT
io_uring/rw: fix cflags posting for single issue multishot read
- Fix the TPMI_RAPL_REG_DOMAIN_INFO register offset in the TPMI part of
the Intel RAPL power capping driver, make it ignore minor hardware
version mismatches (which only indicate exposing additional features)
and update register definitions in it to enable PL4 support (Zhang
Rui).
- Add Arrow Lake-U to the list of processors supporting PL4 in the MSR
part of the Intel RAPL power capping driver (Sumeet Pawnikar).
- Remove excess pci_disable_device() calls from the processor part of
the int340x thermal driver to address a warning triggered during
module unload and remove unused CPU hotplug code related to RAPL
support from it (Zhang Rui).
-----BEGIN PGP SIGNATURE-----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=e9eE
-----END PGP SIGNATURE-----
Merge tag 'pm-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These address two issues in the TPMI module of the Intel RAPL power
capping driver and one issue in the processor part of the Intel
int340x thermal driver, update a CPU ID list and register definitions
needed for RAPL PL4 support and remove some unused code.
Specifics:
- Fix the TPMI_RAPL_REG_DOMAIN_INFO register offset in the TPMI part
of the Intel RAPL power capping driver, make it ignore minor
hardware version mismatches (which only indicate exposing
additional features) and update register definitions in it to
enable PL4 support (Zhang Rui)
- Add Arrow Lake-U to the list of processors supporting PL4 in the
MSR part of the Intel RAPL power capping driver (Sumeet Pawnikar)
- Remove excess pci_disable_device() calls from the processor part of
the int340x thermal driver to address a warning triggered during
module unload and remove unused CPU hotplug code related to RAPL
support from it (Zhang Rui)"
* tag 'pm-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: int340x: processor: Add MMIO RAPL PL4 support
thermal: intel: int340x: processor: Remove MMIO RAPL CPU hotplug support
powercap: intel_rapl_msr: Add PL4 support for Arrowlake-U
powercap: intel_rapl_tpmi: Ignore minor version change
thermal: intel: int340x: processor: Fix warning during module unload
powercap: intel_rapl_tpmi: Fix bogus register reading
Address possible use-after-free scenarios during the processing of
thermal netlink commands and during thermal zone removal (Rafael
Wysocki).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmcJQWASHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxrJ4QAI4OIRUZ6fmpAicQ6IRYSwq/rv7cCkyy
Q3vwLHVq9liG0exD2IKR/fmloIpl3yL9JK1UNY/U4Qfg0diro0iHrZmnpgJ3ecSo
hkvf9hiAF5e03+ugIXjOBJAOF0x9/Z1tdOUJq31IP9BeoclD62Mbc0qB5QsnPPqK
2dv3IlXuY7yqizHLWczAkQw9ELUHHiepMuUSvsGp8WTTdwtSOhQJNP4bl/sbYFWI
0ZBNdt+fk2ivkqAo3iG0rqwK6KlSbSLpms3XDjyJLEtIGlAeKaaq54686GxnkGDL
JRRqR3prTjvf5ITFCi4rgac+YknOjFk4kIuoh8khwS1ijSwxiguGjd14N2QeLzon
ouxP/+C6P4NXRcUS4aPz3zUZp3fRgucthE13LtYrITQLifmsnHUTKvzRxB0d8DDr
K9U4oYUj+V4i90bK16snelfPhZRkL31cu+osgK47jjXpiuZwHhPAEHzGNbGTo9zq
55r8P877uAsOtu10MdxSIlo035xXSxOZl3zzxpS0OHaOyymh51O43+JQQXtgxrQ0
nudtTZL5xJmy/I3mljljAMhFEAwJeiHpYigJmcbQfirhauQhzHUbcYzL5aEh90v/
6tXH8p9gOekkcV4s6GKkoESqK+c/C1Pvx/ZXPSz/j3w0UJnVvZEHVBDNMONVzBx9
PiStFRsoXl7T
=IVMx
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Address possible use-after-free scenarios during the processing of
thermal netlink commands and during thermal zone removal (Rafael
Wysocki)"
* tag 'thermal-6.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Free tzp copy along with the thermal zone
thermal: core: Reference count the zone in thermal_zone_get_by_id()
Remove the scaffold member from the lsm_prop. Remove the
remaining places it is being set.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subj line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Replace the secid in the netlbl_audit structure with an lsm_prop.
Remove scaffolding that was required when the value was a secid.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: fix the subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Change the LSM data stored in the audit transactions from a secid
to an LSM prop. This is done in struct audit_context and struct
audit_aux_data_pids. Several cases of scaffolding can be removed.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subj line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Create a new LSM hook security_cred_getlsmprop() which, like
security_cred_getsecid(), fetches LSM specific attributes from the
cred structure. The associated data elements in the audit sub-system
are changed from a secid to a lsm_prop to accommodate multiple possible
LSM audit users.
Cc: linux-integrity@vger.kernel.org
Cc: audit@vger.kernel.org
Cc: selinux@vger.kernel.org
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subj line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Replace the osid field in the audit_names structure with a
lsm_prop structure. This accommodates the use of an lsm_prop in
security_audit_rule_match() and security_inode_getsecid().
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subj line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Change the security_inode_getsecid() interface to fill in a
lsm_prop structure instead of a u32 secid. This allows for its
callers to gather data from all registered LSMs. Data is provided
for IMA and audit. Change the name to security_inode_getlsmprop().
Cc: linux-integrity@vger.kernel.org
Cc: selinux@vger.kernel.org
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subj line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Change the security_current_getsecid_subj() and
security_task_getsecid_obj() interfaces to fill in a lsm_prop structure
instead of a u32 secid. Audit interfaces will need to collect all
possible security data for possible reporting.
Cc: linux-integrity@vger.kernel.org
Cc: audit@vger.kernel.org
Cc: selinux@vger.kernel.org
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
The audit process LSM information is changed from a secid audit_sig_sid
to an lsm_prop in audit_sig_lsm. Update the users of this data
appropriately. Calls to security_secid_to_secctx() are changed to use
security_lsmprop_to_secctx() instead. security_current_getsecid_subj()
is scaffolded. It will be updated in a subsequent patch.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
There may be more than one LSM that provides IPC data for auditing.
Change security_ipc_getsecid() to fill in a lsm_prop structure instead
of the u32 secid. Change the name to security_ipc_getlsmprop() to
reflect the change.
Cc: audit@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: selinux@vger.kernel.org
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Replace the secid value stored in struct audit_context with a struct
lsm_prop. Change the code that uses this value to accommodate the
change. security_audit_rule_match() expects a lsm_prop, so existing
scaffolding can be removed. A call to security_secid_to_secctx()
is changed to security_lsmprop_to_secctx(). The call to
security_ipc_getsecid() is scaffolded.
A new function lsmprop_is_set() is introduced to identify whether
an lsm_prop contains a non-zero value.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject line tweak, fix lsmprop_is_set() typo]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Add a new hook security_lsmprop_to_secctx() and its LSM specific
implementations. The LSM specific code will use the lsm_prop element
allocated for that module. This allows for the possibility that more
than one module may be called upon to translate a secid to a string,
as can occur in the audit code.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Change the secid parameter of security_audit_rule_match
to a lsm_prop structure pointer. Pass the entry from the
lsm_prop structure for the approprite slot to the LSM hook.
Change the users of security_audit_rule_match to use the
lsm_prop instead of a u32. The scaffolding function lsmprop_init()
fills the structure with the value of the old secid, ensuring that
it is available to the appropriate module hook. The sources of
the secid, security_task_getsecid() and security_inode_getsecid(),
will be converted to use the lsm_prop structure later in the series.
At that point the use of lsmprop_init() is dropped.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject line tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
When more than one security module is exporting data to audit and
networking sub-systems a single 32 bit integer is no longer
sufficient to represent the data. Add a structure to be used instead.
The lsm_prop structure definition is intended to keep the LSM
specific information private to the individual security modules.
The module specific information is included in a new set of
header files under include/lsm. Each security module is allowed
to define the information included for its use in the lsm_prop.
SELinux includes a u32 secid. Smack includes a pointer into its
global label list. The conditional compilation based on feature
inclusion is contained in the include/lsm files.
Cc: apparmor@lists.ubuntu.com
Cc: bpf@vger.kernel.org
Cc: selinux@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: John Johansen <john.johansen@canonical.com>
[PM: added include/linux/lsm/ to MAINTAINERS, subj tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>