Currently, hid_bpf_rdesc_fixup() is called once the match between the
HID device and the driver is done. This can be problematic in case
the driver selected by the kernel would change the report descriptor
after the fact.
To give a chance for hid_bpf_rdesc_fixup() to provide hints on to how
to select a dedicated driver or not, move the call to that BPF hook
earlier in the .probe() process, when we get the first match.
However, this means that we might get called more than once (typically
once for hid-generic, and once for hid-vendor-specific). So we store the
result of HID-BPF fixup in struct hid_device. Basically, this means that
->bpf_rdesc can replace ->dev_rdesc when it was used in the code.
In order to not grow struct hid_device, some fields are re-ordered. This
was the output of pahole for the first 128 bytes:
struct hid_device {
__u8 * dev_rdesc; /* 0 8 */
unsigned int dev_rsize; /* 8 4 */
/* XXX 4 bytes hole, try to pack */
__u8 * rdesc; /* 16 8 */
unsigned int rsize; /* 24 4 */
/* XXX 4 bytes hole, try to pack */
struct hid_collection * collection; /* 32 8 */
unsigned int collection_size; /* 40 4 */
unsigned int maxcollection; /* 44 4 */
unsigned int maxapplication; /* 48 4 */
__u16 bus; /* 52 2 */
__u16 group; /* 54 2 */
__u32 vendor; /* 56 4 */
__u32 product; /* 60 4 */
/* --- cacheline 1 boundary (64 bytes) --- */
__u32 version; /* 64 4 */
enum hid_type type; /* 68 4 */
unsigned int country; /* 72 4 */
/* XXX 4 bytes hole, try to pack */
struct hid_report_enum report_enum[3]; /* 80 6216 */
Basically, we got three holes of 4 bytes. We can reorder things a little
and makes those 3 holes a continuous 12 bytes hole, which can be replaced
by the new pointer and the new unsigned int we need.
In terms of code allocation, when not using HID-BPF, we are back to kernel
v6.2 in hid_open_report(). These multiple kmemdup() calls will be fixed
in a later commit.
Link: https://patch.msgid.link/20241001-hid-bpf-hid-generic-v3-1-2ef1019468df@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
I have a ASUS PN51 S mini pc that has two xhci devices. One from AMD,
and other from ASMEDIA. The one from ASMEDIA have problems when resume
from suspend, and keep broken until unplug the power cord. I use this
kernel parameter: xhci-hcd.quirks=128 and then it works ok. I make a
path to reset only the ASMEDIA xhci.
Signed-off-by: Jose Alberto Reguero <jose.alberto.reguero@gmail.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20240919184202.22249-1-jose.alberto.reguero@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce new kernel config symbol for Microchip usb5744 SMBus programming
support. Since usb5744 i2c initialization routine uses i2c SMBus APIs these
APIs should only be invoked when kernel has I2C support. This new kernel
config describes the dependency on I2C kernel support and fix the below
build issues when USB_ONBOARD_DEV=y and CONFIG_I2C=m.
riscv64-linux-ld: drivers/usb/misc/onboard_usb_dev.o:
undefined reference to `i2c_find_device_by_fwnode'
drivers/usb/misc/onboard_usb_dev.c:408:(.text+0xb24): undefined
reference to `i2c_smbus_write_block_data'
<snip>
Parsing of the i2c-bus bus handle is not put under usb5744 kernel config
check as the intention is to report an error when DT is configured for
usb5744 SMBus support and kernel has USB_ONBOARD_DEV_USB5744 disabled.
Fixes: 6782311d04 ("usb: misc: onboard_usb_dev: add Microchip usb5744 SMBus programming support")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Suggested-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409140539.3Axwv38m-lkp@intel.com/
Acked-by: Matthias Kaehlcke <matthias@kaehlcke.net>
Link: https://lore.kernel.org/r/1727529992-476088-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit addresses an issue where events were being processed when
the controller was in a halted state. To fix this issue by stop
processing the events as the event count was considered stale or
invalid when the controller was halted.
Fixes: fc8bb91bc8 ("usb: dwc3: implement runtime PM")
Cc: stable@kernel.org
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Suggested-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240916231813.206-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When dwc3_resume_common() returns an error, runtime pm is left in
suspended and disabled state in dwc3_resume(). Since the device
is suspended, its parent devices (like the power domain or glue
driver) could also be suspended and may have released resources
that dwc requires. Consequently, calling dwc3_suspend_common() in
this situation could result in attempts to access unclocked or
unpowered registers.
To prevent these problems, runtime PM should always be re-enabled,
even after failed resume attempts. This ensures that
dwc3_suspend_common() is skipped in such cases.
Fixes: 68c26fe581 ("usb: dwc3: set pm runtime active before resume common")
Cc: stable@vger.kernel.org
Signed-off-by: Roy Luo <royluo@google.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20240913232145.3507723-1-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
JieLi tends to use SCSI via USB Mass Storage to implement their own
proprietary commands instead of implementing another USB interface.
Enumerating it as a generic mass storage device will lead to a Hardware
Error sense key get reported.
Ignore this bogus device to prevent appearing a unusable sdX device
file.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Cc: stable <stable@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20241001083407.8336-1-uwu@icenowy.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Registering a gadget driver is expected to complete synchronously and
immediately after calling driver_register() this function checks that
the driver has bound so as to return an error.
Set PROBE_FORCE_SYNCHRONOUS to ensure this is the case even when
asynchronous probing is set as the default.
Fixes: fc274c1e99 ("USB: gadget: Add a new bus for gadgets")
Cc: stable@vger.kernel.org
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20240913102325.2826261-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The i.MX95 is compatible with i.MX8MP's usb controller. This will add a
compatible string "fsl,imx95-dwc3" for i.MX95.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240911061720.495606-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb phy in i.MX95 is compatible with i.MX8MP's, this will add a
compatible "fsl,imx95-usb-phy" for i.MX95. Also change reg maxItems
to 2 since i.MX95 needs another regmap to control Type-C Assist (TCA)
block. Since i.MX95 usb phy is able to switch SS lanes, this will also
add orientation-switch and port property to the file.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240911061720.495606-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
chaoskey_open() takes the lock only to increase the
counter of openings. That means that the mutual exclusion
with chaoskey_disconnect() cannot prevent an increase
of the counter and chaoskey_open() returning a success.
If that race is hit, chaoskey_disconnect() will happily
free all resources associated with the device after
it has dropped the lock, as it has read the counter
as zero.
To prevent this race chaoskey_open() has to check
the presence of the device under the lock.
However, the current per device lock cannot be used,
because it is a part of the data structure to be
freed. Hence an additional global mutex is needed.
The issue is as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: syzbot+422188bce66e76020e55@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=422188bce66e76020e55
Fixes: 66e3e59189 ("usb: Add driver for Altus Metrum ChaosKey device (v2)")
Rule: add
Link: https://lore.kernel.org/stable/20241002132201.552578-1-oneukum%40suse.com
Link: https://lore.kernel.org/r/20241002132201.552578-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IO yurex_write() needs to wait for in order to have a device
ready for writing again can take a long time time.
Consequently the sleep is done in an interruptible state.
Therefore others waiting for yurex_write() itself to finish should
use mutex_lock_interruptible.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 6bc235a2e2 ("USB: add driver for Meywa-Denki & Kayac YUREX")
Rule: add
Link: https://lore.kernel.org/stable/20240924084415.300557-1-oneukum%40suse.com
Link: https://lore.kernel.org/r/20240924084415.300557-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iowarrior_read() uses the iowarrior dev structure, but does not use any
lock on the structure. This can cause various bugs including data-races,
so it is more appropriate to use a mutex lock to safely protect the
iowarrior dev structure. When using a mutex lock, you should split the
branch to prevent blocking when the O_NONBLOCK flag is set.
In addition, it is unnecessary to check for NULL on the iowarrior dev
structure obtained by reading file->private_data. Therefore, it is
better to remove the check.
Fixes: 946b960d13 ("USB: add driver for iowarrior devices.")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://lore.kernel.org/r/20240919103403.3986-1-aha310510@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 2071d0968e ("Documentation: gpio: guidelines for bindings")
deprecated the "gpio" suffix for GPIO consumers in favor of the "gpios"
suffix. Update the Renesas HS-USB DT bindings to reflect this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/e9cf476ffac794bad7b0860dc89afd62a9ebc812.1727853953.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reorganize kerneldoc parameter names to match the parameter
order in the function header.
Problems identified using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20240930112121.95324-19-Julia.Lawall@inria.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Impove device mode ISO transfer error tolerant by reprime the corresponding
endpoint.
The recovery steps when error occurs:
- Delete the error dTD from dQH and giveback request to user.
- Do reprime if dQH is not empty.
- Do prime when new dTD is queued if dQH is empty
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240926022906.473319-3-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, ATDTW semaphore is used to safety link new dTD to dQH. But this
code has a bug when the endpoint is already in error before polling ATDTW
or just met error during polling ATDTW. In that cases, ATDTW will never
turn to 1 and the cpu will busy loop there.
When the endpoint met error, ENDPTSTAT will be cleared by HW. Therefore,
ENDPTSTAT should also be considered during this process. In case of
endpoint error, the current dTD should not be pushed to the head of dQH
since some dTDs may be still not executed. Therefore, the link logic is
also improved accordingly.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20240926022906.473319-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As per USBSTS register description about UEI:
When completion of a USB transaction results in an error condition, this
bit is set by the Host/Device Controller. This bit is set along with the
USBINT bit, if the TD on which the error interrupt occurred also had its
interrupt on complete (IOC) bit set.
UI is set only when IOC set. Add checking UEI to fix miss call
isr_tr_complete_handler() when IOC have not set and transfer error happen.
Acked-by: Peter Chen <peter.chen@kernel.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240926022906.473319-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The chipidea controller doesn't fully support sglist, such as it can not
transfer data spanned more dTDs to form a bus packet, so it can only work
on very limited cases.
The limitations as below:
1. the end address of the first sg buffer must be 4KB aligned.
2. the start and end address of the middle sg buffer must be 4KB aligned.
3. the start address of the first sg buffer must be 4KB aligned.
However, not all the use cases violate these limitations. To make the
controller compatible with most of the cases, this will try to bounce the
problem sglist entries which can be found by sglist_get_invalid_entry().
Then a bounced line buffer (the size will roundup to page size) will be
allocated to replace the remaining problem sg entries. The data will be
copied between problem sg entries and bounce buffer according to the
transfer direction. The bounce buffer will be freed when the request
completed.
Acked-by: Peter Chen <peter.chen@kernel.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240923081203.2851768-3-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To let the device controller work properly on short packet limitations,
one usb request should only correspond to one dTD. Then every dTD will
set IOC. In theory, each dTD support up to 20KB data transfer if the
offset is 0. Due to we cannot predetermine the offset, this will limit
the usb request length to max 16KB. This should be fine since most of
the user transfer data based on this size policy.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20240923081203.2851768-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, the imx deivice controller has below limitations:
1. can't generate short packet interrupt if IOC not set in dTD. So if one
request span more than one dTDs and only the last dTD set IOC, the usb
request will pending there if no more data comes.
2. the controller can't accurately deliver data to differtent usb requests
in some cases due to short packet. For example: one usb request span 3
dTDs, then if the controller received a short packet the next packet
will go to 2nd dTD of current request rather than the first dTD of next
request.
3. can't build a bus packet use multiple dTDs. For example: controller
needs to send one packet of 512 bytes use dTD1 (200 bytes) + dTD2
(312 bytes), actually the host side will see 200 bytes short packet.
Based on these limits, add CI_HDRC_HAS_SHORT_PKT_LIMIT flag and use it on
imx platforms.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20240923081203.2851768-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Tegra GPIO define is a problem for the magic code which extracts
the examples and fixes up the interrupt provider. This was partially
worked around by putting #interrupt-cells in the parent. However,
that's incomplete and causes a warning when dtc "interrupt_provider"
check is enabled. Just drop the Tegra specific define and simplify
the example.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240925173449.1906586-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/usb to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240924084329.53094-2-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240920153430.503212-17-u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As this binding describes USB hubs, it's natural for them to have
downstream devices.
Change "additionalProperties" to "unevaluatedProperties" to allow
properties defined in usb-device.yaml (for DT cells properties) and add
a pattern-based downstream device subnode rule to match those subnodes.
These changes allow downstream devices get defined under the hub.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240917094008.283529-1-uwu@icenowy.me
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function strcpy() is depreciated and potentially unsafe. It performs
no bounds checking on the destination buffer. This could result in
linear overflows beyond the end of the buffer, leading to all kinds of
misbehaviors. The safe replacement is strscpy() [1].
this fixes checkpatch warning:
WARNING: Prefer strscpy over strcpy
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
Signed-off-by: Abdul Rahim <abdul.rahim@myyahoo.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://lore.kernel.org/r/20240914231756.503521-1-abdul.rahim@myyahoo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Get matching data in one step by switching to use i2c_get_match_data().
As a positive side effect the matching data is qualified as a constant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240926122944.1251923-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the scoped variant of `device_for_each_child_node()` to
automatically handle early exits.
This prevents memory leaks if new error paths are introduced,
as no explicit refcount decrement via `fwnode_handle_put()` is needed.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240925-ucsi_glink-scoped-v2-1-a661585fff35@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed some confusing typos that were currently identified with codespell,
the details are as follows:
-in the code comments:
drivers/usb/dwc3/core.c:1406: feild ==> field
drivers/usb/dwc3/core.h:84: boundries ==> boundaries
drivers/usb/dwc3/ep0.c:148: issueing ==> issuing
drivers/usb/dwc3/host.c:38: temperary ==> temporarily
Also fixed a syntax problem in the comments.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Link: https://lore.kernel.org/r/20240930022526.7255-1-shenlichuan@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using dev_err_probe() in spi_probe() improves the kernel output from
spi spi0.0: deferred probe pending: (reason unknown)
to
spi spi0.0: deferred probe pending: ad7124: Failed to get irq...
for my current quest to make a certain spi device work.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20241004094234.268301-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the driver data for rt5682 codec on SSP0 and
max98360a speaker amplifiers on SSP1 for PTL platform.
Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241004030135.67968-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Added match table entry on mtl machines to support HDMI-In capture
with rt5682 I2S audio codec. also added the respective quirk
configuration in rt5682 machine driver.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241004030135.67968-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
alloc_ltalkdev in net/appletalk/dev.c is dead since
commit 00f3696f75 ("net: appletalk: remove cops support")
Removing it (and it's helper) leaves dev.c and if_ltalk.h empty;
remove them and the Makefile entry.
tun.c was including that if_ltalk.h but actually wanted
the uapi version for LTALK_ALEN, fix up the path.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the Microsoft Azure Cobalt 100 CPU to the list of CPUs suffering
from erratum 3194386 added in commit 75b3c43eab ("arm64: errata:
Expand speculative SSBS workaround")
CC: Mark Rutland <mark.rutland@arm.com>
CC: James More <james.morse@arm.com>
CC: Will Deacon <will@kernel.org>
CC: stable@vger.kernel.org # 6.6+
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Link: https://lore.kernel.org/r/20241003225239.321774-1-eahariha@linux.microsoft.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
While it's a bit off topic for them the floating point stress tests do give
us some coverage of context thrashing cases, and also of active signal
delivery separate to the relatively complicated framework in the actual
signals tests. Have the tests enable GCS on startup, ignoring failures so
they continue to work as before on systems without GCS.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Tested-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-39-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add a stress test which runs one more process than we have CPUs spinning
through a very recursive function with frequent syscalls immediately prior
to return and signals being injected every 100ms. The goal is to flag up
any scheduling related issues, for example failure to ensure that barriers
are inserted when moving a GCS using task to another CPU. The test runs for
a configurable amount of time, defaulting to 10 seconds.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Tested-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-38-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Do some testing of the signal handling for GCS, checking that a GCS
frame has the expected information in it and that the expected signals
are delivered with invalid operations.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Tested-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-37-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Verify that we can lock individual GCS mode bits, that other modes
aren't affected and as a side effect also that every combination of
modes can be enabled.
Normally the inability to reenable GCS after disabling it would be an
issue with testing but fortunately the kselftest_harness runs each test
within a fork()ed child. This can be inconvenient for some kinds of
testing but here it means that each test is in a separate thread and
therefore won't be affected by other tests in the suite.
Once we get toolchains with support for enabling GCS by default we will
need to take care to not do that in the build system but there are no
such toolchains yet so it is not yet an issue.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Tested-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-36-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
There are things like threads which nolibc struggles with which we want
to add coverage for, and the ABI allows us to test most of these even if
libc itself does not understand GCS so add a test application built
using the system libc.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Tested-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-35-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
This test program just covers the basic GCS ABI, covering aspects of the
ABI as standalone features without attempting to integrate things.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Tested-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-34-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Since it is not possible to return from the function that enabled GCS
without disabling GCS it is very inconvenient to use the signal handling
tests to cover GCS when GCS is not enabled by the toolchain and runtime,
something that no current distribution does. Since none of the testcases
do anything with stacks that would cause problems with GCS we can sidestep
this issue by unconditionally enabling GCS on startup and exiting with a
call to exit() rather than a return from main().
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-33-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently we ignore si_code unless the expected signal is a SIGSEGV, in
which case we enforce it being SEGV_ACCERR. Allow test cases to specify
exactly which si_code should be generated so we can validate this, and
test for other segfault codes.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-32-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Teach the framework about the GCS signal context, avoiding warnings on
the unknown context.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-31-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In preparation for testing GCS related signal handling add it as a feature
we check for in the signal handling support code.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-30-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>