The current way of storing the configuration is very much
unmaintainable. Convert the data to use designated initializers to make
it easier both to understand and add/update the slice configuration
data.
Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240910-topic-llcc_unwrap-v2-1-f0487c983373@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Matthieu Baerts says:
====================
In this series from Geliang, modifying MPTCP BPF selftests, we have:
- A new MPTCP subflow BPF program setting socket options per subflow: it
looks better to have this old test program in the BPF selftests to
track regressions and to serve as example.
Note: Nicolas is no longer working at Tessares, but he did this work
while working for them, and his email address is no longer available.
- A new hook in the same BPF program to do the verification step.
- A new MPTCP BPF subtest validating the new BPF program added in the
first patch, with the help of the new hook added in the second patch.
---
Changes in v7:
- Patch 2/3: use 'can_loop' instead of 'cond_break'. (Martin)
- Patch 3/3: use bpf_program__attach_cgroup(). (Martin)
- Link to v6: https://lore.kernel.org/r/20240911-upstream-bpf-next-20240506-mptcp-subflow-test-v6-0-7872294c466b@kernel.org
Changes in v6:
- Patch 3/3: use usleep() instead of sleep()
- Series: rebased on top of bpf-next/net
- Link to v5: https://lore.kernel.org/r/20240910-upstream-bpf-next-20240506-mptcp-subflow-test-v5-0-2c664a7da47c@kernel.org
Changes in v5:
- See the individual changelog for more details about them
- Patch 1/3: set TCP on the 2nd subflow
- Patch 2/3: new
- Patch 3/3: use the BPF program from patch 2/3 to do the validation
instead of using ss.
- Series: rebased on top of bpf-next/net
- Link to v4: https://lore.kernel.org/r/20240805-upstream-bpf-next-20240506-mptcp-subflow-test-v4-0-2b4ca6994993@kernel.org
Changes in v4:
- Drop former patch 2/3: MPTCP's pm_nl_ctl requires a new header file:
- I will check later if it is possible to avoid having duplicated
header files in tools/include/uapi, but no need to block this series
for that. Patch 2/3 can be added later if needed.
- Patch 2/2: skip the test if 'ip mptcp' is not available.
- Link to v3: https://lore.kernel.org/r/20240703-upstream-bpf-next-20240506-mptcp-subflow-test-v3-0-ebdc2d494049@kernel.org
Changes in v3:
- Sorry for the delay between v2 and v3, this series was conflicting
with the "add netns helpers", but it looks like it is on hold:
https://lore.kernel.org/cover.1715821541.git.tanggeliang@kylinos.cn
- Patch 1/3 includes "bpf_tracing_net.h", introduced in between.
- New patch 2/3: "selftests/bpf: Add mptcp pm_nl_ctl link".
- Patch 3/3: use the tool introduced in patch 2/3 + SYS_NOFAIL() helper.
- Link to v2: https://lore.kernel.org/r/20240509-upstream-bpf-next-20240506-mptcp-subflow-test-v2-0-4048c2948665@kernel.org
Changes in v2:
- Previous patches 1/4 and 2/4 have been dropped from this series:
- 1/4: "selftests/bpf: Handle SIGINT when creating netns":
- A new version, more generic and no longer specific to MPTCP BPF
selftest will be sent later, as part of a new series. (Alexei)
- 2/4: "selftests/bpf: Add RUN_MPTCP_TEST macro":
- Removed, not to hide helper functions in macros. (Alexei)
- The commit message of patch 1/2 has been clarified to avoid some
possible confusions spot by Alexei.
- Link to v1: https://lore.kernel.org/r/20240507-upstream-bpf-next-20240506-mptcp-subflow-test-v1-0-e2bcbdf49857@kernel.org
---
Geliang Tang (2):
selftests/bpf: Add getsockopt to inspect mptcp subflow
selftests/bpf: Add mptcp subflow subtest
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch adds a subtest named test_subflow in test_mptcp to load and
verify the newly added MPTCP subflow BPF program. To goal is to make
sure it is possible to set different socket options per subflows, while
the userspace socket interface only lets the application to set the same
socket options for the whole MPTCP connection and its multiple subflows.
To check that, a client and a server are started in a dedicated netns,
with veth interfaces to simulate multiple paths. They will exchange data
to allow the creation of an additional subflow.
When the different subflows are being created, the new MPTCP subflow BPF
program will set some socket options: marks and TCP CC. The validation
is done by the same program, when the userspace checks the value of the
modified socket options. On the userspace side, it will see that the
default values are still being used on the MPTCP connection, while the
BPF program will see different options set per subflow of the same MPTCP
connection.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/76
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240926-upstream-bpf-next-20240506-mptcp-subflow-test-v7-3-d26029e15cdd@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This patch adds a "cgroup/getsockopt" way to inspect the subflows of an
MPTCP socket, and verify the modifications done by the same BPF program
in the previous commit: a different mark per subflow, and a different
TCP CC set on the second one. This new hook will be used by the next
commit to verify the socket options set on each subflow.
This extra "cgroup/getsockopt" prog walks the msk->conn_list and use
bpf_core_cast to cast a pointer for readonly. It allows to inspect all
the fields of a structure.
Note that on the kernel side, the MPTCP socket stores a list of subflows
under 'msk->conn_list'. They can be iterated using the generic 'list'
helpers. They have been imported here, with a small difference:
list_for_each_entry() uses 'can_loop' to limit the number of iterations,
and ease its use. Because only data need to be read here, it is enough
to use this technique. It is planned to use bpf_iter, when BPF programs
will be used to modify data from the different subflows.
mptcp_subflow_tcp_sock() and mptcp_for_each_stubflow() helpers have also
be imported.
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240926-upstream-bpf-next-20240506-mptcp-subflow-test-v7-2-d26029e15cdd@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Move Nicolas' patch into bpf selftests directory. This example adds a
different mark (SO_MARK) on each subflow, and changes the TCP CC only on
the first subflow.
From the userspace, an application can do a setsockopt() on an MPTCP
socket, and typically the same value will be propagated to all subflows
(paths). If someone wants to have different values per subflow, the
recommended way is to use BPF. So it is good to add such example here,
and make sure there is no regressions.
This example shows how it is possible to:
Identify the parent msk of an MPTCP subflow.
Put different sockopt for each subflow of a same MPTCP connection.
Here especially, two different behaviours are implemented:
A socket mark (SOL_SOCKET SO_MARK) is put on each subflow of a same
MPTCP connection. The order of creation of the current subflow defines
its mark. The TCP CC algorithm of the very first subflow of an MPTCP
connection is set to "reno".
This is just to show it is possible to identify an MPTCP connection, and
set socket options, from different SOL levels, per subflow. "reno" has
been picked because it is built-in and usually not set as default one.
It is easy to verify with 'ss' that these modifications have been
applied correctly. That's what the next patch is going to do.
Nicolas' code comes from:
commit 4d120186e4d6 ("bpf:examples: update mptcp_set_mark_kern.c")
from the MPTCP repo https://github.com/multipath-tcp/mptcp_net-next (the
"scripts" branch), and it has been adapted by Geliang.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/76
Co-developed-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Nicolas Rybowski <nicolas.rybowski@tessares.net>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240926-upstream-bpf-next-20240506-mptcp-subflow-test-v7-1-d26029e15cdd@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
FCONT=1 means On FIFO error, the SAI will continue from the
same word that caused the FIFO error to set after the FIFO
warning flag has been cleared.
Set FCONT bit in control register to avoid the channel swap
issue after SAI xrun.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1727676508-22830-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add more test cases to cover all supported topdown events regroup cases.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240913084712.13861-7-dapeng1.mi@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add counting and leader sampling tests to verify topdown events including
raw format can be reordered correctly.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240913084712.13861-6-dapeng1.mi@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add leader sampling test to validate event counts are captured into
record and the count value is consistent.
Suggested-by: Kan Liang <kan.liang@linux.intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240913084712.13861-5-dapeng1.mi@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
when running below perf command, we say error is reported.
perf record -e "{slots,instructions,topdown-retiring}:S" -vv -C0 sleep 1
------------------------------------------------------------
perf_event_attr:
type 4 (cpu)
size 168
config 0x400 (slots)
sample_type IP|TID|TIME|READ|CPU|PERIOD|IDENTIFIER
read_format ID|GROUP|LOST
disabled 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 5
------------------------------------------------------------
perf_event_attr:
type 4 (cpu)
size 168
config 0x8000 (topdown-retiring)
{ sample_period, sample_freq } 4000
sample_type IP|TID|TIME|READ|CPU|PERIOD|IDENTIFIER
read_format ID|GROUP|LOST
freq 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd 5 flags 0x8
sys_perf_event_open failed, error -22
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for
event (topdown-retiring).
The reason of error is that the events are regrouped and
topdown-retiring event is moved to closely after the slots event and
topdown-retiring event needs to do the sampling, but Intel PMU driver
doesn't support to sample topdown metrics events.
For topdown metrics events, it just requires to be in a group which has
slots event as leader. It doesn't require topdown metrics event must be
closely after slots event. Thus it's a overkill to move topdown metrics
event closely after slots event in events regrouping and furtherly cause
the above issue.
Thus don't move topdown metrics events forward if they are already in a
group.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240913084712.13861-4-dapeng1.mi@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Addresses an issue where, in the absence of a topdown metrics event
within a sampling group, the slots event was incorrectly bypassed as
the sampling leader when sample_read was enabled.
perf record -e '{slots,branches}:S' -c 10000 -vv sleep 1
In this case, the slots event should be sampled as leader but the
branches event is sampled in fact like the verbose output shows.
perf_event_attr:
type 4 (cpu)
size 168
config 0x400 (slots)
sample_type IP|TID|TIME|READ|CPU|IDENTIFIER
read_format ID|GROUP|LOST
disabled 1
sample_id_all 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 5
------------------------------------------------------------
perf_event_attr:
type 0 (PERF_TYPE_HARDWARE)
size 168
config 0x4 (PERF_COUNT_HW_BRANCH_INSTRUCTIONS)
{ sample_period, sample_freq } 10000
sample_type IP|TID|TIME|READ|CPU|IDENTIFIER
read_format ID|GROUP|LOST
sample_id_all 1
exclude_guest 1
The sample period of slots event instead of branches event is reset to
0.
This fix ensures the slots event remains the leader under these
conditions.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240913084712.13861-3-dapeng1.mi@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
It's not complete to check whether an event is a topdown slots or
topdown metrics event by only comparing the event name since user
may assign the event by RAW format, e.g.
perf stat -e '{instructions,cpu/r400/,cpu/r8300/}' sleep 1
Performance counter stats for 'sleep 1':
<not counted> instructions
<not counted> cpu/r400/
<not supported> cpu/r8300/
1.002917796 seconds time elapsed
0.002955000 seconds user
0.000000000 seconds sys
The RAW format slots and topdown-be-bound events are not recognized and
not regroup the events, and eventually cause error.
Thus add two helpers arch_is_topdown_slots()/arch_is_topdown_metrics()
to detect whether an event is topdown slots/metrics event by comparing
the event config directly, and use these two helpers to replace the
original event name comparisons.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lore.kernel.org/r/20240913084712.13861-2-dapeng1.mi@linux.intel.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Merge series from Dragan Simic <dsimic@manjaro.org>:
This is a small series that improves error handling in the probe path
of the Rockchip SPI drivers, by using dev_err_probe() properly in multiple
places. It also performs a bunch of small, rather trivial code
cleanups, to make the code neater and a bit easier to read.
Merge series from Yang Yingliang <yangyingliang@huaweicloud.com>:
Switch to use {devm_}spi_alloc_host/target() in drivers and remove
{devm_}spi_alloc_master/slave() in spi driver.
Merge series from Raju Rangoju <Raju.Rangoju@amd.com>:
AMD SPI controller’s index mode performance is constrained by the
hardware limitation of the FIFO queue length. This patch series introduces
optimizations to the spi_amd driver, aiming to maximize throughput and
enhance overall performance. The changes includes,
- Enable SPI dual and quad I/O modes and update SPI-MEM support function to
reflect AMD SPI0 hardware capabilities.
- Utilize efficient kernel APIs to streamline SPI I/O operations for
enhanced performance.
- Refine the set tx/rx count functions to optimize SPI I/O throughput.
- Minimize the number of data read calls by efficiently retrieving data
from FIFO queues, improving SPI I/O efficiency.
- Add changes to support AMD HID2 SPI controller and update SPI-MEM support
function to reflect AMD HID2 hardware capabilities.
- Add changes to set SPI controller address mode before initiating the
commands
- Add changes to implement HIDDMA read operation support for HID2 SPI
controller
Setting spi_transfer->effective_speed_hz in transfer_one so that
SPI client driver can use it.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240930093056.93418-4-wahrenst@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of the parameters are unsigned, so fix the used format
specifiers in the debug message in fsl_lpspi_set_bitrate.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240930093056.93418-3-wahrenst@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The target value of scldiv is just a byte, but its calculation in
fsl_lpspi_set_bitrate could be negative. So use an adequate type to store
the result and avoid overflows. After that this needs range check
adjustments, but this should make the code less opaque.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240930093056.93418-2-wahrenst@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Some fix and updates in the following items:
1. examples:
Update generic node name to 'audio-codec' to comply with the
coming change in 'mt6359.dtsi'. This change is necessary to fix the
dtbs_check error:
pmic: 'mt6359codec' does not match any of the regexes: 'pinctrl-[0-9]+'
2. mediatek,dmic-mode:
After inspecting the .dts and .dtsi files using 'mt6359-codec', it was
discovered that the definitions of 'two wires' and 'one wire' are
inverted compared to the DT schema.
For example, the following boards using MT6359 PMIC:
- mt8192-asurada.dtsi
- mt8195-cherry.dtsi
These boards use the same definitions of 'dmic-mode' as other boards
using MT6358 PMIC. The meaning of '0' or '1' has been noted as comments
in the device trees.
Upon examining the code in [1] and [2], it was confirmed that the
definitions of 'dmic-mode' are consistent between "MT6359 PMIC" and
"MT6358 PMIC". Therefore, the DT Schema should be correct as is.
References:
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/mt6358.c#n1875
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/mt6359.c#L1515
Fixes: 539237d1c6 ("dt-bindings: mediatek: mt6359: add codec document")
Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240930075451.14196-1-macpaul.lin@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the device is removed, idpf is supposed to make certain virtchnl
requests e.g. VIRTCHNL2_OP_DEALLOC_VECTORS and VIRTCHNL2_OP_DESTROY_VPORT.
However, this does not happen due to the referenced commit introducing
virtchnl transaction manager and placing its deinitialization before those
messages are sent. Then the sending is impossible due to no transactions
being available.
Lack of cleanup can lead to the FW becoming unresponsive from e.g.
unloading-loading the driver and creating-destroying VFs afterwards.
Move transaction manager deinitialization to after other virtchnl-related
cleanup is done.
Fixes: 34c21fa894 ("idpf: implement virtchnl transaction manager")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When a mailbox message is received, the driver is checking for a non 0
datalen in the controlq descriptor. If it is valid, the payload is
attached to the ctlq message to give to the upper layer. However, the
payload response size given to the upper layer was taken from the buffer
metadata which is _always_ the max buffer size. This meant the API was
returning 4K as the payload size for all messages. This went unnoticed
since the virtchnl exchange response logic was checking for a response
size less than 0 (error), not less than exact size, or not greater than
or equal to the max mailbox buffer size (4K). All of these checks will
pass in the success case since the size provided is always 4K. However,
this breaks anyone that wants to validate the exact response size.
Fetch the actual payload length from the value provided in the
descriptor data_len field (instead of the buffer metadata).
Unfortunately, this means we lose some extra error parsing for variable
sized virtchnl responses such as create vport and get ptypes. However,
the original checks weren't really helping anyways since the size was
_always_ 4K.
Fixes: 34c21fa894 ("idpf: implement virtchnl transaction manager")
Cc: stable@vger.kernel.org # 6.9+
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There is a bug currently when there are more than one VLAN defined
and any reset that affects the PF is initiated, after the reset rebuild
no traffic will pass on any VLAN but the last one created.
This is caused by the iteration though the VLANs during replay each
clearing the vsi_map bitmap of the VSI that is being replayed. The
problem is that during rhe replay, the pointer to the vsi_map bitmap
is used by each successive vlan to determine if it should be replayed
on this VSI.
The logic was that the replay of the VLAN would replace the bit in the map
before the next VLAN would iterate through. But, since the replay copies
the old bitmap pointer to filt_replay_rules and creates a new one for the
recreated VLANS, it does not do this, and leaves the old bitmap broken
to be used to replay the remaining VLANs.
Since the old bitmap will be cleaned up in post replay cleanup, there is
no need to alter it and break following VLAN replay, so don't clear the
bit.
Fixes: 334cb0626d ("ice: Implement VSI replay framework")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently the user may request DPLL_PIN_STATE_SELECTABLE for an output
pin, and this would actually set the DISCONNECTED state instead.
It doesn't make any sense. SELECTABLE is valid only in case of input pins
(on AUTOMATIC type dpll), where dpll itself would select best valid input.
For the output pin only CONNECTED/DISCONNECTED are expected.
Fixes: d7999f5ea6 ("ice: implement dpll interface to control cgu")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix leak of the FW blob (DDP pkg).
Make ice_cfg_tx_topo() const-correct, so ice_init_tx_topology() can avoid
copying whole FW blob. Copy just the topology section, and only when
needed. Reuse the buffer allocated for the read of the current topology.
This was found by kmemleak, with the following trace for each PF:
[<ffffffff8761044d>] kmemdup_noprof+0x1d/0x50
[<ffffffffc0a0a480>] ice_init_ddp_config+0x100/0x220 [ice]
[<ffffffffc0a0da7f>] ice_init_dev+0x6f/0x200 [ice]
[<ffffffffc0a0dc49>] ice_init+0x29/0x560 [ice]
[<ffffffffc0a10c1d>] ice_probe+0x21d/0x310 [ice]
Constify ice_cfg_tx_topo() @buf parameter.
This cascades further down to few more functions.
Fixes: cc5776fe18 ("ice: Enable switching default Tx scheduler topology")
CC: Larysa Zaremba <larysa.zaremba@intel.com>
CC: Jacob Keller <jacob.e.keller@intel.com>
CC: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
CC: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Since commit 2a2cb4c6c1 ("ice: replace ice_vf_recreate_vsi() with
ice_vf_reconfig_vsi()") VF VSI is only reconfigured instead of
recreated. The context configuration from previous setting is still the
same. If any of the config needs to be cleared it needs to be cleared
explicitly.
Previously there was assumption that port vlan will be cleared
automatically. Now, when VSI is only reconfigured we have to do it in the
code.
Not clearing port vlan configuration leads to situation when the driver
VSI config is different than the VSI config in HW. Traffic can't be
passed after setting and clearing port vlan, because of invalid VSI
config in HW.
Example reproduction:
> ip a a dev $(VF) $(VF_IP_ADDRESS)
> ip l s dev $(VF) up
> ping $(VF_IP_ADDRESS)
ping is working fine here
> ip link set eth5 vf 0 vlan 100
> ip link set eth5 vf 0 vlan 0
> ping $(VF_IP_ADDRESS)
ping isn't working
Fixes: 2a2cb4c6c1 ("ice: replace ice_vf_recreate_vsi() with ice_vf_reconfig_vsi()")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Piotr Tyda <piotr.tyda@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This patch addresses an issue with improper reference count handling in the
ice_sriov_set_msix_vec_count() function.
First, the function calls ice_get_vf_by_id(), which increments the
reference count of the vf pointer. If the subsequent call to
ice_get_vf_vsi() fails, the function currently returns an error without
decrementing the reference count of the vf pointer, leading to a reference
count leak. The correct behavior, as implemented in this patch, is to
decrement the reference count using ice_put_vf(vf) before returning an
error when vsi is NULL.
Second, the function calls ice_sriov_get_irqs(), which sets
vf->first_vector_idx. If this call returns a negative value, indicating an
error, the function returns an error without decrementing the reference
count of the vf pointer, resulting in another reference count leak. The
patch addresses this by adding a call to ice_put_vf(vf) before returning
an error when vf->first_vector_idx < 0.
This bug was identified by an experimental static analysis tool developed
by our team. The tool specializes in analyzing reference count operations
and identifying potential mismanagement of reference counts. In this case,
the tool flagged the missing decrement operation as a potential issue,
leading to this patch.
Fixes: 4035c72dc1 ("ice: reconfig host after changing MSI-X on VF")
Fixes: 4d38cb44bd ("ice: manage VFs MSI-X using resource tracking")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@outlook.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This patch addresses a reference count handling issue in the
ice_dpll_init_rclk_pins() function. The function calls ice_dpll_get_pins(),
which increments the reference count of the relevant resources. However,
if the condition WARN_ON((!vsi || !vsi->netdev)) is met, the function
currently returns an error without properly releasing the resources
acquired by ice_dpll_get_pins(), leading to a reference count leak.
To resolve this, the check has been moved to the top of the function. This
ensures that the function verifies the state before any resources are
acquired, avoiding the need for additional resource management in the
error path.
This bug was identified by an experimental static analysis tool developed
by our team. The tool specializes in analyzing reference count operations
and detecting potential issues where resources are not properly managed.
In this case, the tool flagged the missing release operation as a
potential problem, which led to the development of this patch.
Fixes: d7999f5ea6 ("ice: implement dpll interface to control cgu")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@outlook.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The filters set that will reproduce the problem:
$ tc filter add dev $VF0_PR ingress protocol arp prio 0 flower \
skip_sw dst_mac ff:ff:ff:ff:ff:ff action mirred egress \
redirect dev $PF0
$ tc filter add dev $VF0_PR ingress protocol arp prio 0 flower \
skip_sw dst_mac ff:ff:ff:ff:ff:ff src_mac 52:54:00:00:00:10 \
action mirred egress mirror dev $VF1_PR
Expected behaviour is to set all broadcast from VF0 to the LAN. If the
src_mac match the value from filters, send packet to LAN and to VF1.
In this case both LAN_EN and LB_EN flags in switch is set in case of
packet matching both filters. As dst VSI for the only LAN enable bit is
PF VSI, the packet is being seen on PF. To fix this change dst VSI to
the source VSI. It will block receiving any packet even when LB_EN is
set by switch, because local loopback is clear on VF VSI during normal
operation.
Side note: if the second filters action is redirect instead of mirror
LAN_EN is clear, because switch is AND-ing LAN_EN from each matched
filters and OR-ing LB_EN.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Fixes: 73b483b790 ("ice: Manage act flags for switchdev offloads")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Merge series from Chen-Yu Tsai <wenst@chromium.org>:
At ELCE, Sebastian told me about his recent work on adding regulator
supply support to the Rockchip power domain driver [2], how the MediaTek
driver has been using the existing devm_regulator_get() API and
reassigning different device nodes to the device doing the lookup, and
how the new of_regulator_get_optional() is the proper fit for this.
Patch 1 adds a new of_regulator_get_optional() function to look up
regulator supplies using device tree nodes.
Patch 2 adds a devres version of the aforementioned function at
Sebastian's request for the two power domain drivers.
The spi_controller_is_target() check is missing for pm_runtime_disable()
in cdns_spi_remove(), add it.
Fixes: b1b90514ea ("spi: spi-cadence: Add support for Slave mode")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240923040015.3009329-4-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.
Fixes: d36ccd9f7e ("spi: cadence: Runtime pm adaptation")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240923040015.3009329-3-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is not valid to call pm_runtime_set_suspended() for devices
with runtime PM enabled because it returns -EAGAIN if it is enabled
already and working. So, call pm_runtime_disable() before to fix it.
Fixes: 43b6bf406c ("spi: imx: fix runtime pm support for !CONFIG_PM")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240923040015.3009329-2-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The device at 0xffd90000 is named SRU, both in the datasheet and SoC
DTSI. Fix the typo in the bindings to avoid the false positive report:
sound@ffd90000: reg-names:0: 'sru' is not one of ['scu', 'ssi', 'adg']
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240926113241.24060-2-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In __evsel__config_callchain avoid computing arch until code path that
uses it.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ze Gao <zegao2021@gmail.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Weilin Wang <weilin.wang@intel.com>
Link: https://lore.kernel.org/r/20240918223116.127386-1-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick the changes in:
8f0b3cc9a4 ("tcp: RX path for devmem TCP")
That don't result in any changes in the tables generated from that
header.
But while updating I noticed we need to support the new MSG_SOCK_DEVMEM
flag in the hard coded table for the msg flags table, add it.
This silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h
Please see tools/include/uapi/README for details.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZvrO_eT9e_41xrNv@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Picking the changes from:
70d0bb45fa ("net: Correct spelling in headers")
Just a comment fix, addressing this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h
Please see tools/include/uapi/README for details.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/lkml/ZvrNlLdtXAZ1sIIj@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the change in:
a1fab3e69d ("x86/irq: Fix comment on IRQ vector layout")
That just adds some comments, so no changes in perf tooling, just
silences this build warning:
diff -u tools/perf/trace/beauty/arch/x86/include/asm/irq_vectors.h arch/x86/include/asm/irq_vectors.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/lkml/ZvrKT7oQc1AOv6Vk@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from these csets:
0a3e4e94d1 ("platform/x86/intel/ifs: Add SBAF test image loading support")
That cause no changes to tooling:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
$
Just silences this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jithu Joseph <jithu.joseph@intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZvrJY68Btx3a_yV4@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Picking the changes from:
4356d575ef ("fhandle: expose u64 mount id to name_to_handle_at(2)")
b4fef22c2f ("uapi: explain how per-syscall AT_* flags should be allocated")
820a185896 ("fcntl: add F_CREATED_QUERY")
It just moves AT_REMOVEDIR around, and adds a bunch more AT_ for
renameat2() and name_to_handle_at(). We need to improve this situation,
as not all AT_ defines are applicable to all fs flags...
This adds support for those new AT_ defines, addressing this build
warning:
diff -u tools/perf/trace/beauty/include/uapi/sound/asound.h include/uapi/sound/asound.h
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/lkml/ZvrIKL3cREoRHIQd@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
- When sched_ext is in bypass mode (e.g. while disabling the BPF scheduler),
it was using one DSQ to implement global FIFO scheduling as all it has to
do is guaranteeing reasonable forward progress. On multi-socket machines,
this can lead to live-lock conditions under certain workloads. Fixed by
splitting the queue used for FIFO scheduling per NUMA node. This required
several preparation patches.
- Hotplug tests on powerpc could reliably trigger deadlock while enabling a
BPF scheduler. This was caused by cpu_hotplug_lock nesting inside
scx_fork_rwsem and then CPU hotplug path trying to fork a new thread while
holding cpu_hotplug_lock. Fixed by restructuring locking in enable and
disable paths so that the two locks are not coupled. This required several
preparation patches which also fixed a couple other issues in the enable
path.
- A build fix for !CONFIG_SMP.
- Userspace tooling sync and updates.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZvsB8A4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGW0cAP9LWESwNvszp0jDglg8kvS6tyHDLNQYLT99Dy4Q
NPE1OgD+KUKXuRBOhT3dc9dbwodmPtX2rq36QIgHhoGiPB9hew8=
=NH+o
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.12-rc1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- When sched_ext is in bypass mode (e.g. while disabling the BPF
scheduler), it was using one DSQ to implement global FIFO scheduling
as all it has to do is guaranteeing reasonable forward progress.
On multi-socket machines, this can lead to live-lock conditions under
certain workloads. Fixed by splitting the queue used for FIFO
scheduling per NUMA node. This required several preparation patches.
- Hotplug tests on powerpc could reliably trigger deadlock while
enabling a BPF scheduler.
This was caused by cpu_hotplug_lock nesting inside scx_fork_rwsem and
then CPU hotplug path trying to fork a new thread while holding
cpu_hotplug_lock.
Fixed by restructuring locking in enable and disable paths so that
the two locks are not coupled. This required several preparation
patches which also fixed a couple other issues in the enable path.
- A build fix for !CONFIG_SMP
- Userspace tooling sync and updates
* tag 'sched_ext-for-6.12-rc1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Remove redundant p->nr_cpus_allowed checker
sched_ext: Decouple locks in scx_ops_enable()
sched_ext: Decouple locks in scx_ops_disable_workfn()
sched_ext: Add scx_cgroup_enabled to gate cgroup operations and fix scx_tg_online()
sched_ext: Enable scx_ops_init_task() separately
sched_ext: Fix SCX_TASK_INIT -> SCX_TASK_READY transitions in scx_ops_enable()
sched_ext: Initialize in bypass mode
sched_ext: Remove SCX_OPS_PREPPING
sched_ext: Relocate check_hotplug_seq() call in scx_ops_enable()
sched_ext: Use shorter slice while bypassing
sched_ext: Split the global DSQ per NUMA node
sched_ext: Relocate find_user_dsq()
sched_ext: Allow only user DSQs for scx_bpf_consume(), scx_bpf_dsq_nr_queued() and bpf_iter_scx_dsq_new()
scx_flatcg: Use a user DSQ for fallback instead of SCX_DSQ_GLOBAL
tools/sched_ext: Receive misc updates from SCX repo
sched_ext: Add __COMPAT helpers for features added during v6.12 devel cycle
sched_ext: Build fix for !CONFIG_SMP
A compile_commands.json file is used by the LSP in tools like VSCode and
Neovim to look up function and type information. The file is specific to
the state of the current system; add it to the gitignore.
Note: the kernel root's gitignore has a similar entry:
/compile_commands.json
I am not sure why they use '/' for a file as it is used for directories.
Signed-off-by: "John B. Wyatt IV" <jwyatt@redhat.com>
Signed-off-by: "John B. Wyatt IV" <sageofredondo@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
If the rq_prog is not in the list of programs, then we use the last
program in the list and we don't get the expected rpc_prog_unavail error
as the subsequent tests on 'progp' being NULL are ineffective.
We should only assign progp when we find the right program, and we
should initialize it to NULL
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 86ab08beb3 ("SUNRPC: replace program list with program array")
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
The header files linux/module.h is included twice in localio.c,
so one inclusion of each can be removed.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11073
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Like other Asus ExpertBook models the B2502CVA has its keybopard IRQ (1)
described as ActiveLow in the DSDT, which the kernel overrides to EdgeHigh
which breaks the keyboard.
Add the B2502CVA to the irq1_level_low_skip_override[] quirk table to fix
this.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217760
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patch.msgid.link/20240927141606.66826-4-hdegoede@redhat.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>