Commit graph

1,385,397 commits

Author SHA1 Message Date
Marek Vasut
b0dc701847 wifi: wilc1000: Do not operate uninitialized hardware during suspend/resume
In case the hardware is not initialized, do not operate it during
suspend/resume cycle, the hardware is already off so there is no
reason to access it.

In fact, wilc_sdio_enable_interrupt() in the resume callback does
interfere with the same call when initializing the hardware after
resume and makes such initialization after resume fail. Fix this
by not operating uninitialized hardware during suspend/resume.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240821183639.163187-1-marex@denx.de
2024-09-03 21:30:18 +03:00
Filipe Manana
cd9253c23a btrfs: fix race between direct IO write and fsync when using same fd
If we have 2 threads that are using the same file descriptor and one of
them is doing direct IO writes while the other is doing fsync, we have a
race where we can end up either:

1) Attempt a fsync without holding the inode's lock, triggering an
   assertion failures when assertions are enabled;

2) Do an invalid memory access from the fsync task because the file private
   points to memory allocated on stack by the direct IO task and it may be
   used by the fsync task after the stack was destroyed.

The race happens like this:

1) A user space program opens a file descriptor with O_DIRECT;

2) The program spawns 2 threads using libpthread for example;

3) One of the threads uses the file descriptor to do direct IO writes,
   while the other calls fsync using the same file descriptor.

4) Call task A the thread doing direct IO writes and task B the thread
   doing fsyncs;

5) Task A does a direct IO write, and at btrfs_direct_write() sets the
   file's private to an on stack allocated private with the member
   'fsync_skip_inode_lock' set to true;

6) Task B enters btrfs_sync_file() and sees that there's a private
   structure associated to the file which has 'fsync_skip_inode_lock' set
   to true, so it skips locking the inode's VFS lock;

7) Task A completes the direct IO write, and resets the file's private to
   NULL since it had no prior private and our private was stack allocated.
   Then it unlocks the inode's VFS lock;

8) Task B enters btrfs_get_ordered_extents_for_logging(), then the
   assertion that checks the inode's VFS lock is held fails, since task B
   never locked it and task A has already unlocked it.

The stack trace produced is the following:

   assertion failed: inode_is_locked(&inode->vfs_inode), in fs/btrfs/ordered-data.c:983
   ------------[ cut here ]------------
   kernel BUG at fs/btrfs/ordered-data.c:983!
   Oops: invalid opcode: 0000 [#1] PREEMPT SMP PTI
   CPU: 9 PID: 5072 Comm: worker Tainted: G     U     OE      6.10.5-1-default #1 openSUSE Tumbleweed 69f48d427608e1c09e60ea24c6c55e2ca1b049e8
   Hardware name: Acer Predator PH315-52/Covini_CFS, BIOS V1.12 07/28/2020
   RIP: 0010:btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs]
   Code: 50 d6 86 c0 e8 (...)
   RSP: 0018:ffff9e4a03dcfc78 EFLAGS: 00010246
   RAX: 0000000000000054 RBX: ffff9078a9868e98 RCX: 0000000000000000
   RDX: 0000000000000000 RSI: ffff907dce4a7800 RDI: ffff907dce4a7800
   RBP: ffff907805518800 R08: 0000000000000000 R09: ffff9e4a03dcfb38
   R10: ffff9e4a03dcfb30 R11: 0000000000000003 R12: ffff907684ae7800
   R13: 0000000000000001 R14: ffff90774646b600 R15: 0000000000000000
   FS:  00007f04b96006c0(0000) GS:ffff907dce480000(0000) knlGS:0000000000000000
   CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
   CR2: 00007f32acbfc000 CR3: 00000001fd4fa005 CR4: 00000000003726f0
   Call Trace:
    <TASK>
    ? __die_body.cold+0x14/0x24
    ? die+0x2e/0x50
    ? do_trap+0xca/0x110
    ? do_error_trap+0x6a/0x90
    ? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
    ? exc_invalid_op+0x50/0x70
    ? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
    ? asm_exc_invalid_op+0x1a/0x20
    ? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
    ? btrfs_get_ordered_extents_for_logging.cold+0x1f/0x42 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
    btrfs_sync_file+0x21a/0x4d0 [btrfs bb26272d49b4cdc847cf3f7faadd459b62caee9a]
    ? __seccomp_filter+0x31d/0x4f0
    __x64_sys_fdatasync+0x4f/0x90
    do_syscall_64+0x82/0x160
    ? do_futex+0xcb/0x190
    ? __x64_sys_futex+0x10e/0x1d0
    ? switch_fpu_return+0x4f/0xd0
    ? syscall_exit_to_user_mode+0x72/0x220
    ? do_syscall_64+0x8e/0x160
    ? syscall_exit_to_user_mode+0x72/0x220
    ? do_syscall_64+0x8e/0x160
    ? syscall_exit_to_user_mode+0x72/0x220
    ? do_syscall_64+0x8e/0x160
    ? syscall_exit_to_user_mode+0x72/0x220
    ? do_syscall_64+0x8e/0x160
    entry_SYSCALL_64_after_hwframe+0x76/0x7e

Another problem here is if task B grabs the private pointer and then uses
it after task A has finished, since the private was allocated in the stack
of task A, it results in some invalid memory access with a hard to predict
result.

This issue, triggering the assertion, was observed with QEMU workloads by
two users in the Link tags below.

Fix this by not relying on a file's private to pass information to fsync
that it should skip locking the inode and instead pass this information
through a special value stored in current->journal_info. This is safe
because in the relevant section of the direct IO write path we are not
holding a transaction handle, so current->journal_info is NULL.

The following C program triggers the issue:

   $ cat repro.c
   /* Get the O_DIRECT definition. */
   #ifndef _GNU_SOURCE
   #define _GNU_SOURCE
   #endif

   #include <stdio.h>
   #include <stdlib.h>
   #include <unistd.h>
   #include <stdint.h>
   #include <fcntl.h>
   #include <errno.h>
   #include <string.h>
   #include <pthread.h>

   static int fd;

   static ssize_t do_write(int fd, const void *buf, size_t count, off_t offset)
   {
       while (count > 0) {
           ssize_t ret;

           ret = pwrite(fd, buf, count, offset);
           if (ret < 0) {
               if (errno == EINTR)
                   continue;
               return ret;
           }
           count -= ret;
           buf += ret;
       }
       return 0;
   }

   static void *fsync_loop(void *arg)
   {
       while (1) {
           int ret;

           ret = fsync(fd);
           if (ret != 0) {
               perror("Fsync failed");
               exit(6);
           }
       }
   }

   int main(int argc, char *argv[])
   {
       long pagesize;
       void *write_buf;
       pthread_t fsyncer;
       int ret;

       if (argc != 2) {
           fprintf(stderr, "Use: %s <file path>\n", argv[0]);
           return 1;
       }

       fd = open(argv[1], O_WRONLY | O_CREAT | O_TRUNC | O_DIRECT, 0666);
       if (fd == -1) {
           perror("Failed to open/create file");
           return 1;
       }

       pagesize = sysconf(_SC_PAGE_SIZE);
       if (pagesize == -1) {
           perror("Failed to get page size");
           return 2;
       }

       ret = posix_memalign(&write_buf, pagesize, pagesize);
       if (ret) {
           perror("Failed to allocate buffer");
           return 3;
       }

       ret = pthread_create(&fsyncer, NULL, fsync_loop, NULL);
       if (ret != 0) {
           fprintf(stderr, "Failed to create writer thread: %d\n", ret);
           return 4;
       }

       while (1) {
           ret = do_write(fd, write_buf, pagesize, 0);
           if (ret != 0) {
               perror("Write failed");
               exit(5);
           }
       }

       return 0;
   }

   $ mkfs.btrfs -f /dev/sdi
   $ mount /dev/sdi /mnt/sdi
   $ timeout 10 ./repro /mnt/sdi/foo

Usually the race is triggered within less than 1 second. A test case for
fstests will follow soon.

Reported-by: Paulo Dias <paulo.miguel.dias@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219187
Reported-by: Andreas Jahn <jahn-andi@web.de>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219199
Reported-by: syzbot+4704b3cc972bd76024f1@syzkaller.appspotmail.com
Link: https://lore.kernel.org/linux-btrfs/00000000000044ff540620d7dee2@google.com/
Fixes: 939b656bc8 ("btrfs: fix corruption after buffer fault in during direct IO append write")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2024-09-03 20:29:55 +02:00
Jinjie Ruan
d38792292b wifi: brcmsmac: Use kvmemdup to simplify the code
Use kvmemdup instead of kvmalloc() + memcpy() to simplify the code.

No functional change.

Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240821070257.2298559-1-ruanjinjie@huawei.com
2024-09-03 21:29:48 +03:00
Frank Li
25f8554138 dt-bindings: net: wireless: convert marvel-8xxx.txt to yaml format
Convert binding doc marvel-8xxx.txt to yaml format.
Additional change:
- Remove marvell,caldata_00_txpwrlimit_2g_cfg_set in example.
- Remove mmc related property in example.
- Add wakeup-source property.
- Remove vmmc-supply and mmc-pwrseq.

Fix below warning:
arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dtb: /soc@0/bus@30800000/mmc@30b40000/wifi@1:
failed to match any schema with compatible: ['marvell,sd8997']

Acked-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240820142143.443151-1-Frank.Li@nxp.com
2024-09-03 21:28:21 +03:00
Théo Lebrun
b8600b8791
PCI: j721e: Add reset GPIO to struct j721e_pcie
Add reset GPIO to struct j721e_pcie, so it can be used at suspend and
resume stages.

Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-4-a2f9156da6c3@bootlin.com
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
2024-09-03 18:27:16 +00:00
Thomas Richard
7d7ce746a9
PCI: j721e: Use dev_err_probe() in the probe() function
Use dev_err_probe() instead of dev_err() in the probe() function to
simplify the code and standardize the error output.

Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-3-a2f9156da6c3@bootlin.com
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
2024-09-03 18:27:15 +00:00
Thomas Richard
063c938928
PCI: cadence: Set cdns_pcie_host_init() global
During the resume sequence of the host, cdns_pcie_host_init() needs to be
called, so set it global.

The dev function parameter is removed, as it isn't used.

Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-2-a2f9156da6c3@bootlin.com
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
2024-09-03 18:27:14 +00:00
Thomas Richard
d1b6f2e2ce
PCI: cadence: Extract link setup sequence from cdns_pcie_host_setup()
The function cdns_pcie_host_setup() mixes probe structure and link setup.

The link setup must be done during the resume sequence. So extract it from
cdns_pcie_host_setup() and create a dedicated function.

Link: https://lore.kernel.org/linux-pci/20240102-j7200-pcie-s2r-v7-1-a2f9156da6c3@bootlin.com
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
2024-09-03 18:27:12 +00:00
Simona Vetter
e066e9aa4d MAINATINERS: update drm maintainer contacts
Also fix a few places in gpu docs that are still relevant, and add a
bunch of .mailmap entries.

Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
2024-09-03 20:07:57 +02:00
Thomas Bonnefille
cf082dbeda dt-bindings: iio: adc: sophgo,cv1800b-saradc: Add Sophgo CV1800B SARADC
The Sophgo CV1800B SARADC is a Successive Approximation ADC that can be
found in the Sophgo CV1800B SoC.

Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240829-sg2002-adc-v5-1-aacb381e869b@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:44 +01:00
Zhu Jun
3c6b818b09 tools/iio: Add memory allocation failure check for trigger_name
Added a check to handle memory allocation failure for `trigger_name`
and return `-ENOMEM`.

Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Link: https://patch.msgid.link/20240828093129.3040-1-zhujun2@cmss.chinamobile.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:44 +01:00
Andy Shevchenko
da83fd152e iio: imu: st_lsm6dsx: Remove useless dev_fwnode() calls
The device property APIs designed that way that they will return an error when
there is no valid fwnode provided. Moreover, the check for NULL of dev_fwnode()
is not fully correct as in some (currently rare) cases it may contain an error
pointer. This is not a problem anyway (see keyword 'valid' above) that's why
the code works properly even without this change.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://patch.msgid.link/20240826212344.866928-3-andy.shevchenko@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:44 +01:00
Andy Shevchenko
17601ab9d7 iio: imu: st_lsm6dsx: Use iio_read_acpi_mount_matrix() helper
Replace the duplicate ACPI "ROTM" data parsing code with the new
shared iio_read_acpi_mount_matrix() helper.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://patch.msgid.link/20240826212344.866928-2-andy.shevchenko@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:44 +01:00
Rob Herring (Arm)
2f1dddc922 iio: adc: mcp320x: Drop vendorless compatible strings
The vendorless compatible strings are deprecated and weren't retained
when the binding was converted to schema. As a result, they are listed
as undocumented when running "make dt_compatible_check". Rather than add
them back to the schema, let's just drop them as they are unnecessary.
Furthermore, they are unnecessary as the SPI matching will strip the
vendor prefix on compatible string and match that against the
spi_device_id table.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240826191728.1415189-1-robh@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:44 +01:00
Bartosz Golaszewski
631598c419 iio: dac: ad5449: drop support for platform data
There are no longer any users of the platform data struct. Remove
support for it from the driver.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://patch.msgid.link/20240814092629.9862-1-brgl@bgdev.pl
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:44 +01:00
Javier Carrasco
31c022a4f4 iio: adc: xilinx-ams: use device_* to iterate over device child nodes
Use `device_for_each_child_node_scoped()` in `ams_parse_firmware()`
to explicitly state device child node access, and simplify the child
node handling as it is not required outside the loop.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Link: https://patch.msgid.link/20240820-device_child_node_access-v3-1-1ee09bdedb9e@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:44 +01:00
David Lechner
192be24574 iio: ABI: document ad4695 new attributes
The ad4695 driver now supports calibration using the
in_voltageY_calib{scale,bias}[_available] attributes.

Only one of these was documented before. This adds rest.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240820-ad4695-gain-offset-v1-4-c8f6e3b47551@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
David Lechner
b5fe2f7bac doc: iio: ad4695: update for calibration support
Calibration support has been added to the ad4695 driver, so update the
documentation to reflect this.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240820-ad4695-gain-offset-v1-3-c8f6e3b47551@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
David Lechner
7763e40f35 iio: adc: ad4695: implement calibration support
The AD4695 has a calibration feature that allows the user to compensate
for variations in the analog front end. This implements this feature in
the driver using the standard `calibgain` and `calibbias` attributes.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240820-ad4695-gain-offset-v1-2-c8f6e3b47551@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
David Lechner
2ba49fc41b iio: adc: ad4695: add 2nd regmap for 16-bit registers
The AD4695 and similar chips have some multibyte registers that have
to be read/written in a single operation. So we need to add a 2nd regmap
for these registers.

These registers are removed from the 8-bit regmap allowable ranges and
AD4695_MAX_REG is dropped since it would be ambiguous now.

debugfs register access is also updated to automatically use the correct
regmap depending on the register address.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240820-ad4695-gain-offset-v1-1-c8f6e3b47551@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
Denis Benato
16531118ba iio: bmi323: peripheral in lowest power state on suspend
The bmi323 is mounted on some devices that are powered
by an internal battery: help in reducing system overall power drain
while the system is in s2idle or the imu driver is not loaded
by resetting it in its lowest power draining state.

Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Link: https://patch.msgid.link/20240824141122.334620-2-benato.denis96@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
Andy Shevchenko
525e9cd5ac iio: accel: bmc150: Improve bmc150_apply_bosc0200_acpi_orientation()
By using ACPI_HANDLE() the handler argument can be retrieved directly.
Replace ACPI_COMPANION() + dereference with ACPI_HANDLE().

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://patch.msgid.link/20240823230107.745900-1-andy.shevchenko@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
Andy Shevchenko
3f131813d7 iio: accel: bmc150: use fwnode_irq_get_byname()
Use the generic fwnode_irq_get_byname() in place of of_irq_get_byname()
to get the IRQ number from the interrupt pin.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://patch.msgid.link/20240823230056.745872-1-andy.shevchenko@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
Andy Shevchenko
dae65fc2bc iio: proximity: cros_ec_mkbp_proximity: Switch to including mod_devicetable.h for struct of_device_id definition
of.h was only included for this definition, so include the correct header
instead.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://patch.msgid.link/20240823220718.743596-1-andy.shevchenko@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
Danila Tikhonov
89cf93bfb3 iio: magnetometer: ak8975: Add AK09118 support
Add additional AK09118 to the magnetometer driver which has the same
register mapping and scaling as the AK09112 device.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://patch.msgid.link/20240819-ak09918-v4-4-f0734d14cfb9@mainlining.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
Danila Tikhonov
c19bf7faea dt-bindings: iio: magnetometer: Add ak09118
Document asahi-kasei,ak09918 compatible as a fallback compatible,
ak09918 is register compatible with ak09912.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240819-ak09918-v4-3-f0734d14cfb9@mainlining.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
Barnabás Czémán
129464e86c iio: magnetometer: ak8975: Fix reading for ak099xx sensors
Move ST2 reading with overflow handling after measurement data
reading.
ST2 register read have to be read after read measurment data,
because it means end of the reading and realease the lock on the data.
Remove ST2 read skip on interrupt based waiting because ST2 required to
be read out at and of the axis read.

Fixes: 57e73a423b ("iio: ak8975: add ak09911 and ak09912 support")
Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://patch.msgid.link/20240819-ak09918-v4-2-f0734d14cfb9@mainlining.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:43 +01:00
Barnabás Czémán
3b92fc43bf iio: magnetometer: ak8975: Relax failure on unknown id
Relax failure when driver gets an unknown device id for
allow probe for register compatible devices.

Signed-off-by: Barnabás Czémán <barnabas.czeman@mainlining.org>
Link: https://patch.msgid.link/20240819-ak09918-v4-1-f0734d14cfb9@mainlining.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-03 18:49:42 +01:00
Abhinav Jain
b4bcdff7e8 selftests: filesystems: fix warn_unused_result build warnings
Add return value checks for read & write calls in test_listmount_ns
function. This patch resolves below compilation warnings:

```
statmount_test_ns.c: In function ‘test_listmount_ns’:

statmount_test_ns.c:322:17: warning: ignoring return value of ‘write’
declared with attribute ‘warn_unused_result’ [-Wunused-result]

statmount_test_ns.c:323:17: warning: ignoring return value of ‘read’
declared with attribute ‘warn_unused_result’ [-Wunused-result]
```

Signed-off-by: Abhinav Jain <jain.abhinav177@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2024-09-03 11:42:55 -06:00
Heikki Krogerus
87eb3cb4ec usb: typec: ucsi: Fix cable registration
The Cable PD Revision field in GET_CABLE_PROPERTY was
introduced in UCSI v2.1, so adding check for that.

The cable properties are also not used anywhere after the
cable is registered, so removing the cable_prop member
from struct ucsi_connector while at it.

Fixes: 38ca416597 ("usb: typec: ucsi: Register cables based on GET_CABLE_PROPERTY")
Cc: stable@vger.kernel.org
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240903130945.3395291-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-03 19:26:18 +02:00
Jens Axboe
761e5afb6d MAINTAINERS: move the BFQ io scheduler to orphan state
Nobody is maintaining this code, and it just falls under the umbrella
of block layer code. But at least mark it as such, in case anyone wants
to care more deeply about it and assume the responsibility of doing so.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-03 11:22:27 -06:00
Alexandre Mergnat
e1991d102b
ASoC: mediatek: mt8365: Add the AFE driver support
Add a driver for the Audio Front End (AFE) PCM to provide Audio
Uplink (UL) and Downlink (DL) paths.
Use the ALSA SoC Dynamic Audio Power Management to add widget and
kcontrol supports.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-11-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03 18:17:29 +01:00
Nicolas Belin
1bf6dbd75f
ASoc: mediatek: mt8365: Add a specific soundcard for EVK
Add a specific soundcard for mt8365-evk. It supports audio jack
in/out, dmics, the amic and lineout.

Signed-off-by: Nicolas Belin <nbelin@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-10-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03 18:17:28 +01:00
Alexandre Mergnat
5097c0c863
ASoC: mediatek: mt8365: Add PCM DAI support
Add Pulse Code Modulation Device Audio Interface support for MT8365 SoC.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-9-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03 18:17:27 +01:00
Alexandre Mergnat
1c50ec75ce
ASoC: mediatek: mt8365: Add DMIC DAI support
Add Digital Micro Device Audio Interface support for MT8365 SoC.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-8-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03 18:17:26 +01:00
Alexandre Mergnat
7c58c88e52
ASoC: mediatek: mt8365: Add ADDA DAI support
Add ADDA Device Audio Interface support for MT8365 SoC.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-7-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03 18:17:25 +01:00
Alexandre Mergnat
402bbb13a1
ASoC: mediatek: mt8365: Add I2S DAI support
Add I2S Device Audio Interface support for MT8365 SoC.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-6-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03 18:17:24 +01:00
Alexandre Mergnat
ef307b40b7
ASoC: mediatek: mt8365: Add audio clock control support
Add audio clock wrapper and audio tuner control.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-5-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03 18:17:24 +01:00
Alexandre Mergnat
38c7c9ddc7
ASoC: mediatek: mt8365: Add common header
Add header files for register definition and structure.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-4-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03 18:17:23 +01:00
Alexandre Mergnat
761cab6678
dt-bindings: mfd: mediatek: Add codec property for MT6357 PMIC
Add the audio codec sub-device. This sub-device is used to set the
optional voltage values according to the hardware.
The properties are:
  - Setup of microphone bias voltage.
  - Setup of the speaker pin pull-down.

Also, add the audio power supply property which is dedicated for
the audio codec sub-device.

Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-3-6518d953a141@baylibre.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03 18:17:22 +01:00
Alexandre Mergnat
76d80dcdd5
ASoC: dt-bindings: mediatek,mt8365-mt6357: Add audio sound card document
Add soundcard bindings for the MT8365 SoC with the MT6357 audio codec.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-2-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03 18:17:21 +01:00
Alexandre Mergnat
ceb3ca2876
ASoC: dt-bindings: mediatek,mt8365-afe: Add audio afe document
Add MT8365 audio front-end bindings

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-1-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03 18:17:20 +01:00
Maurizio Lombardi
899d2e5a4e nvmet: Identify-Active Namespace ID List command should reject invalid nsid
nsid values of 0xFFFFFFFE and 0XFFFFFFFF should be rejected with
a status code of "Invalid Namespace or Format".
See NVMe Base Specification, Active Namespace ID list (CNS 02h).

Fixes: a07b4970f4 ("nvmet: add a generic NVMe target")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-09-03 10:05:40 -07:00
Christoph Hellwig
28982ad73d nvme: set BLK_FEAT_ZONED for ZNS multipath disks
The new stricter limits validation doesn't like a max_append_sectors value
to be set without BLK_FEAT_ZONED.  Set it before allocation the disk to
fix this instead of just inheriting it later.

Fixes: d690cb8ae1 ("block: add an API to atomically update queue limits")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-09-03 10:00:10 -07:00
Kalle Valo
e88b9ed3e0 ath.git patches for v6.11-rc7
We have three patch which address two issues in the ath11k driver
 which should be addressed for 6.11-rc7:
 
 One patch fixes a NULL pointer dereference while parsing transmit
 power envelope (TPE) information, and the other two patches revert the
 hibernation support since it is interfering with suspend on some
 platforms. Note the cause of the suspend wakeups is still being
 investigated, and it is hoped this can be addressed and hibernation
 support can be restored in the near future.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYKADIWIQQ/mtSHzPUi16IfDEksFbugiYzLewUCZtcpwRQcampvaG5zb25A
 a2VybmVsLm9yZwAKCRAsFbugiYzLe6uIAP9wa6OX4oQswrUfm5/NOkb3N24gyXfI
 RHr4E/Q0gFhB+QD/aksyfPwowRCv/xLNkF0y6jt0WyQEOKtOMlID21ebCA4=
 =8VbW
 -----END PGP SIGNATURE-----

Merge tag 'ath-current-20240903' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath

ath.git patches for v6.11-rc7

We have three patch which address two issues in the ath11k driver
which should be addressed for 6.11-rc7:

One patch fixes a NULL pointer dereference while parsing transmit
power envelope (TPE) information, and the other two patches revert the
hibernation support since it is interfering with suspend on some
platforms. Note the cause of the suspend wakeups is still being
investigated, and it is hoped this can be addressed and hibernation
support can be restored in the near future.
2024-09-03 19:54:15 +03:00
Rodrigo Vivi
8da19441d0
drm/xe/display: Avoid encoder_suspend at runtime suspend
Fix circular locking dependency on runtime suspend.

<4> [74.952215] ======================================================
<4> [74.952217] WARNING: possible circular locking dependency detected
<4> [74.952219] 6.10.0-rc7-xe #1 Not tainted
<4> [74.952221] ------------------------------------------------------
<4> [74.952223] kworker/7:1/82 is trying to acquire lock:
<4> [74.952226] ffff888120548488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_modeset_lock_all+0x40/0x1e0 [drm]
<4> [74.952260]
but task is already holding lock:
<4> [74.952262] ffffffffa0ae59c0 (xe_pm_runtime_lockdep_map){+.+.}-{0:0}, at: xe_pm_runtime_suspend+0x2f/0x340 [xe]
<4> [74.952322]
which lock already depends on the new lock.

The commit 'b1d90a86 ("drm/xe: Use the encoder suspend helper also used
by the i915 driver")' didn't do anything wrong. It actually fixed a
critical bug, because the encoder_suspend was never getting actually
called because it was returning if (has_display(xe)) instead of
if (!has_display(xe)). However, this ended up introducing the encoder
suspend calls in the runtime routines as well, causing the circular
locking dependency.

Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2304
Fixes: b1d90a862c ("drm/xe: Use the encoder suspend helper also used by the i915 driver")
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830183507.298351-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-09-03 12:47:00 -04:00
Rodrigo Vivi
bc947d9a8c
drm/xe: Add missing runtime reference to wedged upon gt_reset
Fixes this missed case:

xe 0000:00:02.0: [drm] Missing outer runtime PM protection
WARNING: CPU: 99 PID: 1455 at drivers/gpu/drm/xe/xe_pm.c:564 xe_pm_runtime_get_noresume+0x48/0x60 [xe]
Call Trace:
<TASK>
? show_regs+0x67/0x70
? __warn+0x94/0x1b0
? xe_pm_runtime_get_noresume+0x48/0x60 [xe]
? report_bug+0x1b7/0x1d0
? handle_bug+0x46/0x80
? exc_invalid_op+0x19/0x70
? asm_exc_invalid_op+0x1b/0x20
? xe_pm_runtime_get_noresume+0x48/0x60 [xe]
xe_device_declare_wedged+0x91/0x280 [xe]
gt_reset_worker+0xa2/0x250 [xe]

v2: Also move get and get the right Fixes tag (Himal, Brost)

Fixes: fb74b205cd ("drm/xe: Introduce a simple wedged state")
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830183507.298351-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-09-03 12:46:39 -04:00
André Almeida
156bb2c569 unicode: Fix utf8_load() error path
utf8_load() requests the symbol "utf8_data_table" and then checks if the
requested UTF-8 version is supported. If it's unsupported, it tries to
put the data table using symbol_put(). If an unsupported version is
requested, symbol_put() fails like this:

 kernel BUG at kernel/module/main.c:786!
 RIP: 0010:__symbol_put+0x93/0xb0
 Call Trace:
  <TASK>
  ? __die_body.cold+0x19/0x27
  ? die+0x2e/0x50
  ? do_trap+0xca/0x110
  ? do_error_trap+0x65/0x80
  ? __symbol_put+0x93/0xb0
  ? exc_invalid_op+0x51/0x70
  ? __symbol_put+0x93/0xb0
  ? asm_exc_invalid_op+0x1a/0x20
  ? __pfx_cmp_name+0x10/0x10
  ? __symbol_put+0x93/0xb0
  ? __symbol_put+0x62/0xb0
  utf8_load+0xf8/0x150

That happens because symbol_put() expects the unique string that
identify the symbol, instead of a pointer to the loaded symbol. Fix that
by using such string.

Fixes: 2b3d047870 ("unicode: Add utf8-data module")
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20240902225511.757831-2-andrealmeid@igalia.com
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
2024-09-03 12:45:07 -04:00
Detlev Casanova
b0cdf9cc08
spi: dt-bindings: Add rockchip,rk3576-spi compatible
It is compatible with the rockchip,rk3066-spi SPI core.

Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240903152308.13565-8-detlev.casanova@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-03 17:38:41 +01:00
Pablo Neira Ayuso
4201f39389 netfilter: nf_tables: set element timeout update support
Store new timeout and expiration in transaction object, use them to
update elements from .commit path. Otherwise, discard update if .abort
path is exercised.

Use update_flags in the transaction to note whether the timeout,
expiration, or both need to be updated.

Annotate access to timeout extension now that it can be updated while
lockless read access is possible.

Reject timeout updates on elements with no timeout extension.

Element transaction remains in the 96 bytes kmalloc slab on x86_64 after
this update.

This patch requires ("netfilter: nf_tables: use timestamp to check for
set element timeout") to make sure an element does not expire while
transaction is ongoing.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-09-03 18:19:44 +02:00