Add a test case for commit bb4485562f ("ASoC: cs-amp-lib: Ignore
empty UEFI calibration entries").
Any entries in the calibration blob that have calTime==0 are empty
entries. So they must not be returned by a lookup.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20240830144819.118362-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a clk == NULL check after the switch to check for
unsupported clk types. Since clk is re-assigned in a loop,
this check is useless right now for anything but the first
round. Let's fix this up by assigning clk = NULL in the
loop before the switch statement.
Fixes: a245fecbb8 ("clk: rockchip: add basic infrastructure for clock branches")
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
[added fixes + stable-cc]
Link: https://lore.kernel.org/r/20240325193609.237182-6-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
All clocks are registered early using CLK_OF_DECLARE(), which marks
the DT node as processed. For the processed DT node the probe routine
is never called. Thus this whole code is never executed. This could
be "fixed" by using CLK_OF_DECLARE_DRIVER, which avoids marking the
DT node as processed. But then the probe routine would re-register
all the clocks by calling rk3588_clk_init() again.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240325193609.237182-2-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
On an NVMe namespace that does not support metadata, it is possible to
send an IO command with metadata through io-passthru. This allows issues
like [1] to trigger in the completion code path.
nvme_map_user_request() doesn't check if the namespace supports metadata
before sending it forward. It also allows admin commands with metadata to
be processed as it ignores metadata when bdev == NULL and may report
success.
Reject an IO command with metadata when the NVMe namespace doesn't
support it and reject an admin command if it has metadata.
[1] https://lore.kernel.org/all/mb61pcylvnym8.fsf@amazon.com/
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Puranjay Mohan <pjy@amazon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
It is not safe to dereference fl->c.flc_owner without first confirming
fl->fl_lmops is the expected manager. nfsd4_deleg_getattr_conflict()
tests fl_lmops but largely ignores the result and assumes that flc_owner
is an nfs4_delegation anyway. This is wrong.
With this patch we restore the "!= &nfsd_lease_mng_ops" case to behave
as it did before the change mentioned below. This is the same as the
current code, but without any reference to a possible delegation.
Fixes: c5967721e1 ("NFSD: handle GETATTR conflict with write delegation")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
MULTI GBT AN Control Register is IEEE Standard Register 7.32 (not a mask).
The right place should be in igc_reg.h file. In accordance with the
registers naming convention added IGC_' prefix.
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When adding devm_regulator_bulk_get_const() I missed adding a stub for
when CONFIG_REGULATOR is not enabled. Under certain conditions (like
randconfig testing) this can cause the compiler to reports errors
like:
error: implicit declaration of function 'devm_regulator_bulk_get_const';
did you mean 'devm_regulator_bulk_get_enable'?
Add the stub.
Fixes: 1de452a0ed ("regulator: core: Allow drivers to define their init data as const")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408301813.TesFuSbh-lkp@intel.com/
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20240830073511.1.Ib733229a8a19fad8179213c05e1af01b51e42328@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
According to the IEEE standard report the EEE ability (registers 7.60 and
7.62) and the EEE Link Partner ability (registers 7.61 and 7.63). Use the
kernel's 'ethtool_keee' structure and report EEE link modes.
Example:
ethtool --show-eee <device>
Before:
Advertised EEE link modes: Not reported
Link partner advertised EEE link modes: Not reported
After:
Advertised EEE link modes: 100baseT/Full
1000baseT/Full
2500baseT/Full
Link partner advertised EEE link modes: 100baseT/Full
1000baseT/Full
2500baseT/Full
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When running the igc with XDP/ZC in busy polling mode with deferral of hard
interrupts, interrupts still happen from time to time. That is caused by
the igc task watchdog which triggers Rx interrupts periodically.
That mechanism has been introduced to overcome skb/memory allocation
failures [1]. So the Rx clean functions stop processing the Rx ring in case
of such failure. The task watchdog triggers Rx interrupts periodically in
the hope that memory became available in the mean time.
The current behavior is undesirable for real time applications, because the
driver induced Rx interrupts trigger also the softirq processing. However,
all real time packets should be processed by the application which uses the
busy polling method.
Therefore, only trigger the Rx interrupts in case of real allocation
failures. Introduce a new flag for signaling that condition.
[1] - https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=3be507547e6177e5c808544bd6a2efa2c7f1d436
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add support for offloading MQPRIO. The hardware has four priorities as well
as four queues. Each queue must be a assigned with a unique priority.
However, the priorities are only considered in TSN Tx mode. There are two
TSN Tx modes. In case of MQPRIO the Qbv capability is not required.
Therefore, use the legacy TSN Tx mode, which performs strict priority
arbitration.
Example for mqprio with hardware offload:
|tc qdisc replace dev ${INTERFACE} handle 100 parent root mqprio num_tc 4 \
| map 0 0 0 0 0 1 2 3 0 0 0 0 0 0 0 0 \
| queues 1@0 1@1 1@2 1@3 \
| hw 1
The mqprio Qdisc also allows to configure the `preemptible_tcs'. However,
frame preemption is not supported yet.
Tested on Intel i225 and implemented by following data sheet section 7.5.2,
Transmit Scheduling.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When VCMDQs are assigned to a VINTF owned by a guest (HYP_OWN bit unset),
only TLB and ATC invalidation commands are supported by the VCMDQ HW. So,
implement the new cmdq->supports_cmd op to scan the input cmd in order to
make sure that it is supported by the selected queue.
Note that the guest VM shouldn't have HYP_OWN bit being set regardless of
guest kernel driver writing it or not, i.e. the hypervisor running in the
host OS should wire this bit to zero when trapping a write access to this
VINTF_CONFIG register from a guest kernel.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/8160292337059b91271045800e5c62f7295e2c24.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The VCMDQ in the tegra241-cmdqv driver has a guest mode that supports only
a few invalidation commands. A batch is initialized with a cmdq, so it has
to confirm whether a new command is supported or not.
Add a supports_cmd function pointer to the cmdq structure, where the vcmdq
driver should hook a command scan function. Add an inline helper too so it
can be used by both sides.
If a new command is not supported, simply issue the existing batch and re-
init it as a new batch.
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/aafb24b881504f18c5d0c7c15f2134e40ad2c486.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
NVIDIA's Tegra241 Soc has a CMDQ-Virtualization (CMDQV) hardware, extending
the standard ARM SMMU v3 IP to support multiple VCMDQs with virtualization
capabilities. In terms of command queue, they are very like a standard SMMU
CMDQ (or ECMDQs), but only support CS_NONE in the CS field of CMD_SYNC.
Add a new tegra241-cmdqv driver, and insert its structure pointer into the
existing arm_smmu_device, and then add related function calls in the SMMUv3
driver to interact with the CMDQV driver.
In the CMDQV driver, add a minimal part for the in-kernel support: reserve
VINTF0 for in-kernel use, and assign some of the VCMDQs to the VINTF0, and
select one VCMDQ based on the current CPU ID to execute supported commands.
This multi-queue design for in-kernel use gives some limited improvements:
up to 20% reduction of invalidation time was measured by a multi-threaded
DMA unmap benchmark, compared to a single queue.
The other part of the CMDQV driver will be user-space support that gives a
hypervisor running on the host OS to talk to the driver for virtualization
use cases, allowing VMs to use VCMDQs without trappings, i.e. no VM Exits.
This is designed based on IOMMUFD, and its RFC series is also under review.
It will provide a guest OS a bigger improvement: 70% to 90% reductions of
TLB invalidation time were measured by DMA unmap tests running in a guest,
compared to nested SMMU CMDQ (with trappings).
As the initial version, the CMDQV driver only supports ACPI configurations.
Signed-off-by: Nate Watterson <nwatterson@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Co-developed-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/dce50490b2c10b7254fb36aa73ed7ffd812b283a.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
For model-specific implementation, repurpose the acpi_smmu_get_options()
to a wider acpi_smmu_acpi_probe_model(). A new model can add to the list
in this new function.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/79716299829aeab2e55b8c7932f2634b209bb4d5.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The CMDQV extension in NVIDIA Tegra241 SoC only supports CS_NONE in the
CS field of CMD_SYNC. Add a new SMMU option to accommodate that.
Suggested-by: Will Deacon <will@kernel.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/a3cb9bb2429fbae4a59f7ef517614d226763d717.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The symbols __arm_smmu_cmdq_skip_err(), arm_smmu_init_one_queue(), and
arm_smmu_cmdq_init() need to be used by the tegra241-cmdqv compilation
unit in a following patch.
Remove the static and put prototypes in the header.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/c4f2aa5f5f40a2e7c68b132c6d3171d6403de57a.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The CMDQV extension on NVIDIA Tegra241 SoC only supports CS_NONE in the
CS field of CMD_SYNC, v.s. standard SMMU CMDQ. Pass in the cmdq pointer
directly, so the function can identify a different cmdq implementation.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/723288287997b6dfbcd2a904d2c11e9b23f82250.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
The driver calls in different places the arm_smmu_get_cmdq() helper, and
it's fine to do so since the helper always returns the single SMMU CMDQ.
However, with NVIDIA CMDQV extension or SMMU ECMDQ, there can be multiple
cmdqs in the system to select one from. And either case requires a batch
of commands to be issued to the same cmdq. Thus, a cmdq has to be decided
in the higher-level callers.
Add a cmdq pointer in arm_smmu_cmdq_batch structure, and decide the cmdq
when initializing the batch. Pass its pointer down to the bottom function.
Update __arm_smmu_cmdq_issue_cmd() accordingly for single command issuers.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/2cbf5ddefb6ea611e48d67c642271bd24421eb21.1724970714.git.nicolinc@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Use time_*() macros instead of using jiffies directly to handle overflow
issues.
Fixes: cc1aeedb98 ("drm/imagination: Implement firmware infrastructure and META FW support")
Signed-off-by: Chen Yufan <chenyufan@vivo.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823093925.9599-1-chenyufan@vivo.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Use the dev_err_probe() helper to simplify error handling during probe.
This also handle scenario, when EDEFER is returned and useless error
is printed.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20240826121421.3384792-3-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use devm_spi_alloc_host() so that there's no need to call
spi_controller_put() in the error path.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20240826121421.3384792-2-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For buffer registration (or updates), a userspace iovec is copied in
and updated. If the application is within a compat syscall, then the
iovec type is compat_iovec rather than iovec. However, the type used
in __io_sqe_buffers_update() and io_sqe_buffers_register() is always
struct iovec, and hence the source is incremented by the size of a
non-compat iovec in the loop. This misses every other iovec in the
source, and will run into garbage half way through the copies and
return -EFAULT to the application.
Maintain the source address separately and assign to our user vec
pointer, so that copies always happen from the right source address.
While in there, correct a bad placement of __user which triggered
the following sparse warning prior to this fix:
io_uring/rsrc.c:981:33: warning: cast removes address space '__user' of expression
io_uring/rsrc.c:981:30: warning: incorrect type in assignment (different address spaces)
io_uring/rsrc.c:981:30: expected struct iovec const [noderef] __user *uvec
io_uring/rsrc.c:981:30: got struct iovec *[noderef] __user
Fixes: f4eaf8eda8 ("io_uring/rsrc: Drop io_copy_iov in favor of iovec API")
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
vdso_test_correctness test fails on powerpc:
~ # ./vdso_test_correctness
...
[RUN] Testing clock_gettime for clock CLOCK_REALTIME_ALARM (8)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock CLOCK_BOOTTIME_ALARM (9)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock CLOCK_SGI_CYCLE (10)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
...
[RUN] Testing clock_gettime for clock invalid (-1)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock invalid (-2147483648)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
[RUN] Testing clock_gettime for clock invalid (2147483647)...
[FAIL] No such clock, but __vdso_clock_gettime returned 22
On powerpc, a call to a VDSO function is not an ordinary C function
call. Unlike several architectures which returns a negative error code
in case of an error, powerpc sets CR[SO] and returns the error code
as a positive value.
Define and use a macro called VDSO_CALL() which takes a pointer
to the function to call, the number of arguments and the arguments.
Also update ABI vdso documentation to reflect this subtlety.
Provide a specific version of VDSO_CALL() for powerpc that negates
the error code on return when CR[SO] is set.
Fixes: c7e5789b24 ("kselftest: Move test_vdso to the vDSO test suite")
Fixes: 2e9a972566 ("selftests: vdso: Add a selftest for vDSO getcpu()")
Fixes: 693f5ca08c ("kselftest: Extend vDSO selftest")
Fixes: b2f1c3db28 ("kselftest: Extend vdso correctness test to clock_gettime64")
Fixes: 4920a2590e ("selftests/vDSO: add tests for vgetrandom")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Running vdso_test_correctness on powerpc64 gives the following warning:
~ # ./vdso_test_correctness
Warning: failed to find clock_gettime64 in vDSO
This is because vdso_test_correctness was built with VDSO_32BIT defined.
__powerpc__ macro is defined on both powerpc32 and powerpc64 so
__powerpc64__ needs to be checked first in vdso_config.h
Fixes: 693f5ca08c ("kselftest: Extend vDSO selftest")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Following error occurs when running vdso_test_correctness on powerpc:
~ # ./vdso_test_correctness
[WARN] failed to find vDSO
[SKIP] No vDSO, so skipping clock_gettime() tests
[SKIP] No vDSO, so skipping clock_gettime64() tests
[RUN] Testing getcpu...
[OK] CPU 0: syscall: cpu 0, node 0
On powerpc, vDSO is neither called linux-vdso.so.1 nor linux-gate.so.1
but linux-vdso32.so.1 or linux-vdso64.so.1.
Also search those two names before giving up.
Fixes: c7e5789b24 ("kselftest: Move test_vdso to the vDSO test suite")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
If the getrandom test compiles for an arch, don't exit fatally if the
actual cpu it's running on is unsupported.
Suggested-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Building test_vdso_getrandom currently leads to following issue:
In file included from /home/xry111/git-repos/linux/tools/include/linux/compiler_types.h:36,
from /home/xry111/git-repos/linux/include/uapi/linux/stddef.h:5,
from /home/xry111/git-repos/linux/include/uapi/linux/posix_types.h:5,
from /usr/include/asm/sigcontext.h:12,
from /usr/include/bits/sigcontext.h:30,
from /usr/include/signal.h:301,
from vdso_test_getrandom.c:14:
/home/xry111/git-repos/linux/tools/include/linux/compiler-gcc.h:3:2: error: #error "Please don't include <linux/compiler-gcc.h> directly, include <linux/compiler.h> instead."
3 | #error "Please don't include <linux/compiler-gcc.h> directly, include <linux/compiler.h> instead."
| ^~~~~
It's because the compiler_types.h inclusion in
include/uapi/linux/stddef.h is expected to be removed by the
header_install.sh script, as compiler_types.h shouldn't be used from
user space.
Add KHDR_INCLUDES before the existing include/uapi inclusion so that
usr/include takes precedence if it's populated.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
CONFIG_FUNCTION_ALIGNMENT=0 is no longer necessary and BULID_VDSO wasn't
spelled right while BUILD_VDSO isn't necessary, so just remove these.
Reported-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
On systems that set -Wl,--as-needed, putting the -lsodium in the wrong
place on the command line means we get a linker error:
CC vdso_test_chacha
/usr/bin/ld: /tmp/ccKpjnSM.o: in function `main':
vdso_test_chacha.c:(.text+0x276): undefined reference to `crypto_stream_chacha20'
collect2: error: ld returned 1 exit status
Fix this by passing pkg-config's --libs output to the LDFLAGS field
instead of the CFLAGS field, as is customary.
Reported-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When libsodium is installed into its own prefix, the --cflags output is
needed for the compiler to find libsodium headers.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Don't hard-code x86 specific names. Rather, use vdso_config definitions
to find the correct function matching the architecture.
Add random VDSO function names in names[][]. Remove the #ifdef
CONFIG_VDSO32, as having the name there all the time is harmless and
guaranties a steady index for following strings.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[Jason: add [6] to variable declaration rather than each usage site.]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Building test_vdso_chacha currently leads to following issue:
In file included from /home/chleroy/linux-powerpc/include/linux/limits.h:7,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/local_lim.h:38,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/posix1_lim.h:161,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/limits.h:195,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/lib/gcc/powerpc64-buildroot-linux-gnu/12.3.0/include-fixed/limits.h:203,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/lib/gcc/powerpc64-buildroot-linux-gnu/12.3.0/include-fixed/syslimits.h:7,
from /opt/powerpc64-e5500--glibc--stable-2024.02-1/lib/gcc/powerpc64-buildroot-linux-gnu/12.3.0/include-fixed/limits.h:34,
from /tmp/sodium/usr/local/include/sodium/export.h:7,
from /tmp/sodium/usr/local/include/sodium/crypto_stream_chacha20.h:14,
from vdso_test_chacha.c:6:
/opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/xopen_lim.h:99:6: error: missing binary operator before token "("
99 | # if INT_MAX == 32767
| ^~~~~~~
/opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/xopen_lim.h:102:7: error: missing binary operator before token "("
102 | # if INT_MAX == 2147483647
| ^~~~~~~
/opt/powerpc64-e5500--glibc--stable-2024.02-1/powerpc64-buildroot-linux-gnu/sysroot/usr/include/bits/xopen_lim.h:126:6: error: missing binary operator before token "("
126 | # if LONG_MAX == 2147483647
| ^~~~~~~~
This is due to kernel include/linux/limits.h being included instead of
libc's limits.h.
This is because directory include/ is added through option -isystem so
it goes prior to glibc's include directory.
Replace -isystem by -idirafter.
But this implies that now tools/include/linux/linkage.h is included
instead of include/linux/linkage.h, so define a stub for
SYM_FUNC_START() and SYM_FUNC_END().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Architectures use different location for vDSO sources:
arch/mips/vdso
arch/sparc/vdso
arch/arm64/kernel/vdso
arch/riscv/kernel/vdso
arch/csky/kernel/vdso
arch/x86/um/vdso
arch/x86/entry/vdso
arch/powerpc/kernel/vdso
arch/arm/vdso
arch/loongarch/vdso
Don't hard-code vdso sources location in selftest Makefile. Instead
create a vdso/ symbolic link in tools/arch/$arch/ and update Makefile
accordingly.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Rather than using pthread_get/set_specific, just use gcc's __thread
annotation, which is noticeably faster and makes the code more obvious.
Also, just have one simplified struct called vgrnd, instead of trying to
split things up semantically. Those divisions were useful when this code
was split across several commit *messages*, but doesn't make as much
sense within a single file. This should make the code more clear and
provide a better example for implementers.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Here's a new modem device id.
This one has been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCZtHD4wAKCRALxc3C7H1l
CAQVAP4vhB9K9/j24wsz+B7N1WHSZe/USLUsO5xJGwLOu3npXwEAtd8Xzz/DVFaw
/qmtd4YflELooK6u0sK1vla/jydnzgU=
=wBM6
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-6.11-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial device id for 6.11-rc6
Here's a new modem device id.
This one has been in linux-next with no reported issues.
* tag 'usb-serial-6.11-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add MeiG Smart SRM825L
Enable compile testing for broader build coverage. None of the drivers
use anything from "asm", so code should build everywhere.
CONFIG_PLAT_VERSATILE is being selected by driver dependencies
(CONFIG_ARCH_INTEGRATOR and CONFIG_ARCH_REALVIEW), so directory can be
always added to Makefile targets without impacting other configurations.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20240825-soc-dev-fixes-v1-4-ff4b35abed83@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If sched_in event for current task is not recorded, sched_in timestamp
will be set to end_time of time window interest, causing an error in
timestamp show. In this case, we choose to ignore this event.
Test scenario:
perf[1229608] does not record the first sched_in event, run time and sch delay are both 0
# perf sched timehist
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
2090450.763231 [0000] perf[1229608] 0.000 0.000 0.000
2090450.763235 [0000] migration/0[15] 0.000 0.001 0.003
2090450.763263 [0001] perf[1229608] 0.000 0.000 0.000
2090450.763268 [0001] migration/1[21] 0.000 0.001 0.004
2090450.763302 [0002] perf[1229608] 0.000 0.000 0.000
2090450.763309 [0002] migration/2[27] 0.000 0.001 0.007
2090450.763338 [0003] perf[1229608] 0.000 0.000 0.000
2090450.763343 [0003] migration/3[33] 0.000 0.001 0.004
Before:
arbitrarily specify a time window of interest, timestamp will be set to an incorrect value
# perf sched timehist --time 100,200
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
200.000000 [0000] perf[1229608] 0.000 0.000 0.000
200.000000 [0001] perf[1229608] 0.000 0.000 0.000
200.000000 [0002] perf[1229608] 0.000 0.000 0.000
200.000000 [0003] perf[1229608] 0.000 0.000 0.000
200.000000 [0004] perf[1229608] 0.000 0.000 0.000
200.000000 [0005] perf[1229608] 0.000 0.000 0.000
200.000000 [0006] perf[1229608] 0.000 0.000 0.000
200.000000 [0007] perf[1229608] 0.000 0.000 0.000
After:
# perf sched timehist --time 100,200
Samples of sched_switch event do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- ---------
Fixes: 853b740711 ("perf sched timehist: Add option to specify time window of interest")
Signed-off-by: Yang Jihong <yangjihong@bytedance.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240819024720.2405244-1-yangjihong@bytedance.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The spinlock and rwlock use a single-element per-cpu array to track
current locks due to performance reason. But this means the key is
always available and it cannot simply account lock stats in the array
because some of them are invalid.
In fact, the contention_end() program in the BPF invalidates the entry
by setting the 'lock' value to 0 instead of deleting the entry for the
hashmap. So it should skip entries with the lock value of 0 in the
account_end_timestamp().
Otherwise, it'd have spurious high contention on an idle machine:
$ sudo perf lock con -ab -Y spinlock sleep 3
contended total wait max wait avg wait type caller
8 4.72 s 1.84 s 590.46 ms spinlock rcu_core+0xc7
8 1.87 s 1.87 s 233.48 ms spinlock process_one_work+0x1b5
2 1.87 s 1.87 s 933.92 ms spinlock worker_thread+0x1a2
3 1.81 s 1.81 s 603.93 ms spinlock tmigr_update_events+0x13c
2 1.72 s 1.72 s 861.98 ms spinlock tick_do_update_jiffies64+0x25
6 42.48 us 13.02 us 7.08 us spinlock futex_q_lock+0x2a
1 13.03 us 13.03 us 13.03 us spinlock futex_wake+0xce
1 11.61 us 11.61 us 11.61 us spinlock rcu_core+0xc7
I don't believe it has contention on a spinlock longer than 1 second.
After this change, it only reports some small contentions.
$ sudo perf lock con -ab -Y spinlock sleep 3
contended total wait max wait avg wait type caller
4 133.51 us 43.29 us 33.38 us spinlock tick_do_update_jiffies64+0x25
4 69.06 us 31.82 us 17.27 us spinlock process_one_work+0x1b5
2 50.66 us 25.77 us 25.33 us spinlock rcu_core+0xc7
1 28.45 us 28.45 us 28.45 us spinlock rcu_core+0xc7
1 24.77 us 24.77 us 24.77 us spinlock tmigr_update_events+0x13c
1 23.34 us 23.34 us 23.34 us spinlock raw_spin_rq_lock_nested+0x15
Fixes: b5711042a1 ("perf lock contention: Use per-cpu array map for spinlocks")
Reported-by: Xi Wang <xii@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: bpf@vger.kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240828052953.1445862-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The ampere1a cpu is affected by erratum AC04_CPU_10 which is the same
bug as AC03_CPU_38. Add ampere1a to the AC03_CPU_38 workaround midr list.
Cc: <stable@vger.kernel.org>
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240827211701.2216719-1-scott@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Fix filemap_invalidate_inode() to use invalidate_inode_pages2_range()
rather than truncate_inode_pages_range(). The latter clears the
invalidated bit of a partial pages rather than discarding it entirely.
This causes copy_file_range() to fail on cifs because the partial pages at
either end of the destination range aren't evicted and reread, but rather
just partly cleared.
This causes generic/075 and generic/112 xfstests to fail.
Fixes: 74e797d79c ("mm: Provide a means of invalidation without using launder_folio")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20240828210249.1078637-5-dhowells@redhat.com
cc: Matthew Wilcox <willy@infradead.org>
cc: Miklos Szeredi <miklos@szeredi.hu>
cc: Trond Myklebust <trond.myklebust@hammerspace.com>
cc: Christoph Hellwig <hch@lst.de>
cc: Andrew Morton <akpm@linux-foundation.org>
cc: Alexander Viro <viro@zeniv.linux.org.uk>
cc: Christian Brauner <brauner@kernel.org>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-mm@kvack.org
cc: linux-fsdevel@vger.kernel.org
cc: netfs@lists.linux.dev
cc: v9fs@lists.linux.dev
cc: linux-afs@lists.infradead.org
cc: ceph-devel@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: devel@lists.orangefs.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
When it updates the lock stat for the first time, it needs to create an
element in the BPF hash map.
But if there's a concurrent thread waiting for the same lock (like for
rwsem or rwlock), it might race with the thread and possibly fail to
update with -EEXIST.
In that case, it can lookup the map again and put the data there instead
of failing.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20240830065150.1758962-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The LCB_F_SPIN bit is used for spinlock, rwlock and optimistic spinning
in mutex. In get_tstamp_elem() it needs to check spinlock and rwlock
only. As mutex sets the LCB_F_MUTEX, it can check those two bits and
reduce the number of operations.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20240830065150.1758962-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>