Driver code is leaking OF node reference from of_get_parent() in
bcm53573_ilp_init(). Usage of of_get_parent() is not needed in the
first place, because the parent node will not be freed while we are
processing given node (triggered by CLK_OF_DECLARE()). Thus fix the
leak by accessing parent directly, instead of of_get_parent().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240826065801.17081-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The kernel lrc is used solely by the execlist infra.
Move it to the execlist port struct and initialize it only when
execlists are used.
v2: Rebase, improve error handling readability (Jonathan)
Signed-off-by: Ilia Levi <ilia.levi@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826100655.1719060-1-ilia.levi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
- Fix a number of crashers
- Update email address for an NFSD reviewer
-----BEGIN PGP SIGNATURE-----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=fRqF
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Fix a number of crashers
- Update email address for an NFSD reviewer
* tag 'nfsd-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
fs/nfsd: fix update of inode attrs in CB_GETATTR
nfsd: fix potential UAF in nfsd4_cb_getattr_release
nfsd: hold reference to delegation when updating it for cb_getattr
MAINTAINERS: Update Olga Kornievskaia's email address
nfsd: prevent panic for nfsv4.0 closed files in nfs4_show_open
nfsd: ensure that nfsd4_fattr_args.context is zeroed out
-----BEGIN PGP SIGNATURE-----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=+IpE
-----END PGP SIGNATURE-----
Merge tag 'for-6.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix use-after-free when submitting bios for read, after an error and
partially submitted bio the original one is freed while it can be
still be accessed again
- fix fstests case btrfs/301, with enabled quotas wait for delayed
iputs when flushing delalloc
- fix periodic block group reclaim, an unitialized value can be
returned if there are no block groups to reclaim
- fix build warning (-Wmaybe-uninitialized)
* tag 'for-6.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix uninitialized return value from btrfs_reclaim_sweep()
btrfs: fix a use-after-free when hitting errors inside btrfs_submit_chunk()
btrfs: initialize last_extent_end to fix -Wmaybe-uninitialized warning in extent_fiemap()
btrfs: run delayed iputs when flushing delalloc
Switch to using devm_clk_get_enable() helper instead of acquiring the
clock with devm_clk_get(), enabling it, and defining and installing
a custom devm action to call clk_disable().
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/Zs4UWGKt3hLjNmoP@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Adds driver to enable PCIe board which uses AMD QDMA (the Queue-based
Direct Memory Access) subsystem. For example, Xilinx Alveo V70 AI
Accelerator devices.
https://www.xilinx.com/applications/data-center/v70.html
The QDMA subsystem is used in conjunction with the PCI Express IP block
to provide high performance data transfer between host memory and the
card's DMA subsystem.
+-------+ +-------+ +-----------+
PCIe | | | | | |
Tx/Rx | | | | AXI | |
<=======> | PCIE | <===> | QDMA | <====>| User Logic|
| | | | | |
+-------+ +-------+ +-----------+
The primary mechanism to transfer data using the QDMA is for the QDMA
engine to operate on instructions (descriptors) provided by the host
operating system. Using the descriptors, the QDMA can move data in both
the Host to Card (H2C) direction, or the Card to Host (C2H) direction.
The QDMA provides a per-queue basis option whether DMA traffic goes
to an AXI4 memory map (MM) interface or to an AXI4-Stream interface.
The hardware detail is provided by
https://docs.xilinx.com/r/en-US/pg302-qdma
Implements dmaengine APIs to support MM DMA transfers.
- probe the available DMA channels
- use dma_slave_map for channel lookup
- use virtual channel to manage dmaengine tx descriptors
- implement device_prep_slave_sg callback to handle host scatter gather
list
Signed-off-by: Nishad Saraf <nishads@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://lore.kernel.org/r/20240819211948.688786-2-lizhi.hou@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When this file was renamed in commit b8a6d9980f ("dma: ipu: rename
mach/ipu.h to include/linux/dma/ipu-dma.h"), 4 .c files have been modified
accordingly:
drivers/dma/ipu/ipu_idmac.c
drivers/dma/ipu/ipu_irq.c
--> removed in commit f1de55ff7c ("dmaengine: ipu: Remove the driver")
in 2023-08
drivers/media/platform/soc_camera/mx3_camera.c
--> removed in commit c93cc61475 ("[media] staging/media: remove
deprecated mx3 driver") in 2016-06
drivers/video/mx3fb.c
--> removed in commit bfac19e239 ("fbdev: mx3fb: Remove the driver")
in 2023-08
Now include/linux/dma/ipu-dma.h is unused and can be removed as-well.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/532e7e2816ccf226f3ab1fa76ec7873bc09299d0.1724258714.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Battlemage platform is sufficiently tested and found stable. CI is also
pretty stable. Remove the force_probe requirement to enable the platform
support by default.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828082152.3194814-1-balasubramani.vivekanandan@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
By associative and commutative laws, the result of the two 'audited' is
zero. Take the second 'audited' as an example:
1) audited = requested & avd->auditallow;
2) audited &= ~requested;
==> audited = ~requested & (requested & avd->auditallow);
==> audited = (~requested & requested) & avd->auditallow;
==> audited = 0 & avd->auditallow;
==> audited = 0;
In fact, it is more readable to directly write zero. The value of the
first 'audited' is 0 because AUDIT is not allowed. The second 'audited'
is zero because there is no AUDITALLOW permission.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The 'fsl,imx28-saif' compatible has already the mxs-saif.txt description.
This patch converts (and removes it) this file to fsl,saif.yaml (to follow
current fsl convention).
Changes for the mxs-saif.txt:
- Adds 'clocks', '#clock-cells' and '#sound-dai-cells' properties
- Provide device description
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240828092709.2626359-1-lukma@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The sound card design is based on reference PLL frequencies that
are the root of all clock rates calculations.
Today, those frequencies are currently specified in DT via assigned-clocks,
because they correspond to the basic audio use-case.
It makes no sense to setup clock rates for a sound card without
referencing the clocks for the sound card, mainly because at
some point more complex audio use cases will be supported
and those root rates would need to change.
To solve this situation, let's legitimize the presence of assigned-clocks
in the sound card by documenting those clocks, as it describes a true
dependency of the sound card and paths the way of more complex
audio uses-cases involving those root frequencies.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240828-topic-amlogic-upstream-bindings-fixes-audio-snd-card-v2-2-58159abf0779@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The sound card design is based on reference PLL frequencies that
are the root of all clock rates calculations.
Today, those frequencies are currently specified in DT via assigned-clocks,
because they correspond to the basic audio use-case.
It makes no sense to setup clock rates for a sound card without
referencing the clocks for the sound card, mainly because at
some point more complex audio use cases will be supported
and those root rates would need to change.
To solve this situation, let's legitimize the presence of assigned-clocks
in the sound card by documenting those clocks, as it describes a true
dependency of the sound card and paths the way of more complex
audio uses-cases involving those root frequencies.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240828-topic-amlogic-upstream-bindings-fixes-audio-snd-card-v2-1-58159abf0779@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
There are no maintainers specified for tools/testing/selftests/x86. Shuah has
mentioned [1] that the patches should go through x86 tree or in special cases
directly to Shuah's tree after getting ack-ed from x86 maintainers. Different
people have been confused when sending patches as correct maintainers aren't
found by get_maintainer.pl script. Fix this by adding entry to MAINTAINERS
file.
[1] https://lore.kernel.org/all/90dc0dfc-4c67-4ea1-b705-0585d6e2ec47@linuxfoundation.org
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20240610052810.1488793-1-usama.anjum@collabora.com
This adds node for E5010 JPEG Encoder which is a stateful JPEG Encoder
present in AM62A SoC [1], supporting baseline encoding of semiplanar based
YUV420 and YUV422 raw video formats to JPEG encoding, with resolutions
supported from 64x64 to 8kx8k.
E5010 JPEG Encoder IP is present in main domain, so this also adds address
range for core and mmu regions of E5010 IP in cbass_main node.
Link: https://www.ti.com/lit/pdf/spruj16 [1]
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20240826162250.380005-2-devarsht@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
CAN instances 0 and 1 in the mcu domain and 0 in the main domain are
brought on the evm through headers J5, J8 and J10 respectively. Thus,
add their respective transceiver's 0, 1 and 2 dt nodes as well as
add the required pinmux to add support for these CAN instances.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20240827105644.575862-2-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
System firmware uses main_uart5 in J722S EVM for trace data.
Thus, describe it in device tree for completeness,
adding the pinmux and mark it as reserved.
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20240827105644.575862-3-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
wkup_uart0 is a reserved node that is used by Device Manager firmware.
Only TX and RX pins are required for the firmware and enabling pinctrl
for CTS and RTS breaks the wakeup functionality of wkup_uart0. Drop the
conflicting muxes.
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Link: https://lore.kernel.org/r/20240826-am62p-v1-1-b713b48628d1@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain
use timers. Therefore, change the status of the timer nodes to
"reserved" to avoid any clash. Usage is described as below:
+===================+=============+
| Remoteproc node | Timer Node |
+===================+=============+
| main_r5fss0_core0 | main_timer2 |
+-------------------+-------------+
| main_r5fss0_core1 | main_timer3 |
+-------------------+-------------+
| main_r5fss1_core0 | main_timer4 |
+-------------------+-------------+
| main_r5fss1_core1 | main_timer5 |
+-------------------+-------------+
| c71_0 | main_timer0 |
+-------------------+-------------+
| c71_1 | main_timer1 |
+-------------------+-------------+
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826104821.1516344-6-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain
use timers. Therefore, change the status of the timer nodes to
"reserved" to avoid any clash. Usage is described as below:
+===================+=============+
| Remoteproc node | Timer Node |
+===================+=============+
| main_r5fss0_core0 | main_timer2 |
+-------------------+-------------+
| main_r5fss0_core1 | main_timer3 |
+-------------------+-------------+
| main_r5fss1_core0 | main_timer4 |
+-------------------+-------------+
| main_r5fss1_core1 | main_timer5 |
+-------------------+-------------+
| c71_0 | main_timer0 |
+-------------------+-------------+
| c71_1 | main_timer1 |
+-------------------+-------------+
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826104821.1516344-5-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain
use timers. Therefore, change the status of the timer nodes to
"reserved" to avoid any clash. Usage is described as below:
+===================+==============+
| Remoteproc node | Timer Node |
+===================+==============+
| main_r5fss0_core0 | main_timer12 |
+-------------------+--------------+
| main_r5fss0_core1 | main_timer13 |
+-------------------+--------------+
| main_r5fss1_core0 | main_timer14 |
+-------------------+--------------+
| main_r5fss1_core1 | main_timer15 |
+-------------------+--------------+
| c66_0 | main_timer0 |
+-------------------+--------------+
| c66_1 | main_timer1 |
+-------------------+--------------+
| c71_0 | main_timer2 |
+-------------------+--------------+
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826104821.1516344-4-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain
use timers. Therefore, change the status of the timer nodes to
"reserved" to avoid any clash. Usage is described as below:
+===================+==============+
| Remoteproc node | Timer Node |
+===================+==============+
| main_r5fss0_core0 | main_timer12 |
+-------------------+--------------+
| main_r5fss0_core1 | main_timer13 |
+-------------------+--------------+
| main_r5fss1_core0 | main_timer14 |
+-------------------+--------------+
| main_r5fss1_core1 | main_timer15 |
+-------------------+--------------+
| c66_0 | main_timer0 |
+-------------------+--------------+
| c66_1 | main_timer1 |
+-------------------+--------------+
| c71_0 | main_timer2 |
+-------------------+--------------+
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826104821.1516344-3-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The remoteproc firmware of R5F in the MAIN voltage domain use timers.
Therefore, change the status of the timer nodes to "reserved" to avoid
any clash. Usage is described as below:
+===================+==========================+
| Remoteproc node | Timer Node |
+===================+==========================+
| main_r5fss0_core0 | main_timer0, main_timer2 |
+-------------------+--------------------------+
| main_r5fss0_core1 | main_timer1 |
+-------------------+--------------------------+
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826104821.1516344-2-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
To allow firmware to pick up all DTs from here, move the overlays that
are normally applied during DT fixup to the kernel source as well. Hook
then into the build nevertheless to ensure that regular checks are
performed.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/91f8b825467651ebd51a4051f153ab136eeb1849.1724830741.git.jan.kiszka@siemens.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The PG1 A variant of the iot2050 series has been identified which
partially lacks support for lock-step mode. This implies that all
iot2050 boards can't support this mode. As a result, lock-step mode has
been disabled across all iot2050 boards for consistency and to avoid
potential issues.
Signed-off-by: Li Hua Qian <huaqian.li@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/r/d1f5f84db7a1597cd29628a0b503e578367b7b40.1724830741.git.jan.kiszka@siemens.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The TI AM69 SK board has three R5F clusters in the MAIN domain, and all
of these are configured for LockStep mode at the moment. Switch all of
these R5F clusters to Split mode by default to maximize the number of
R5F cores.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826093024.1183540-8-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The TI J784S4 EVM board has three R5F clusters in the MAIN domain, and
all of these are configured for LockStep mode at the moment. Switch
all of these R5F clusters to Split mode by default to maximize the
number of R5F cores.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826093024.1183540-7-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The TI AM68 SK board has two R5F clusters in the MAIN domain, and both
of these are configured for LockStep mode at the moment. Switch both of
these R5F clusters to Split mode by default to maximize the number of
R5F cores.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826093024.1183540-6-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The TI J721S2 EVM board has two R5F clusters in the MAIN domain, and
both of these are configured for LockStep mode at the moment. Switch
both of these R5F clusters to Split mode by default to maximize the
number of R5F cores.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826093024.1183540-5-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The TI J721E SK board has two R5F clusters in the MAIN domain, and both
of these are configured for LockStep mode at the moment. Switch both of
these R5F clusters to Split mode by default to maximize the number of
R5F cores.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826093024.1183540-4-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The TI J721E EVM board has two R5F clusters in the MAIN domain, and
both of these are configured for LockStep mode at the moment. Switch
both of these R5F clusters to Split mode by default to maximize the
number of R5F cores.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826093024.1183540-3-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The TI J7200 EVM board has one R5F cluster in the MAIN domain, and it is
configured for LockStep mode at the moment. Switch the MAIN R5F cluster
to Split mode by default to maximize the number of R5F cores.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://lore.kernel.org/r/20240826093024.1183540-2-b-padhi@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
This enables E5010 JPEG Encoder which is a stateful JPEG Encoder present in
TI's AM62A SoC [1] and supporting baseline encoding of semiplanar based
YUV420 and YUV422 raw video formats to JPEG encoding, with resolutions
supported from 64x64 to 8kx8k resolution.
Link: https://www.ti.com/lit/pdf/spruj16 [1]
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20240826162250.380005-3-devarsht@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Use scope based cleanup instead of manual of_node_put() calls, hence
simplifying the handling of error paths.
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Link: https://lore.kernel.org/r/20240825085714.10736-5-five231003@gmail.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Use scope based cleanup, instead of manual of_node_put() calls, which
automatically free()s "struct device_node".
While at it, refactor the code from knav_queue_probe() into the separate
functions to make auto cleanup look more neat.
Doing the cleanup this way has the advantage of reducing the chance of
memory leaks in case we need to read from new OF nodes in the future
when we probe.
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Link: https://lore.kernel.org/r/20240825085714.10736-4-five231003@gmail.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Use scope based cleanup instead of manual of_node_put() calls, hence
simplifying the handling of error paths at various places.
While at it, use dev_err_probe() instead of dev_err() in all the code
paths touched.
Suggested-by: Julia Lawall <julia.lawall@inria.fr>
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Link: https://lore.kernel.org/r/20240825085714.10736-3-five231003@gmail.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Factor out memories setup code from probe() into a new function
pruss_of_setup_memories(). This sets the stage for introducing auto
cleanup of the device node (done in the subsequent patch), since the
clean up depends on the scope of the pointer and factoring out
code into a separate function obviously limits the scope of the various
variables used in that function.
Apart from the above, this change also has the advantage of making the
code look more neat.
While at it, use dev_err_probe() instead of plain dev_err() as this new
function is called by the probe().
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Link: https://lore.kernel.org/r/20240825085714.10736-2-five231003@gmail.com
Signed-off-by: Nishanth Menon <nm@ti.com>
External interfaces should be disabled at the SoC DTSI level, since
the node is incomplete. Disable Ethernet switch and ports in SoC DTSI
and enable them in the board DTS. If the board DTS includes a SoM DTSI
that completes the node description, enable the Ethernet switch and
ports in SoM DTSI.
Reflect this change in SoM DTSIs by removing ethernet port disable.
Signed-off-by: Logan Bristol <logan.bristol@utexas.edu>
Acked-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Acked-by: Josua Mayer <josua@solid-run.com>
Link: https://lore.kernel.org/r/20240809135753.1186-1-logan.bristol@utexas.edu
Signed-off-by: Nishanth Menon <nm@ti.com>
assigned-clock sets DEV_RTIx_RTI_CLK(id:0) whereas clocks sets
DEV_RTIx_RTI_CLK_PARENT_GLUELOGIC_HFOSC0_CLKOUT(id:1)[1]. This does not
look right, the timers in the driver assume a max frequency of 32kHz for
the heartbeat (HFOSC0 is 19.2MHz on j784s4-evm).
With this change, WDIOC_GETTIMELEFT return coherent time left
(DEFAULT_HEARTBEAT=60, reports 60s upon opening the cdev).
[1] https://software-dl.ti.com/tisci/esd/latest/5_soc_doc/j784s4/clocks.html#clocks-for-rti0-device
Fixes: caae599de8 ("arm64: dts: ti: k3-j784s4-main: Add the main domain watchdog instances")
Suggested-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Eric Chanudet <echanude@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20240805174330.2132717-2-echanude@redhat.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Make sure that ggtt_node_remove() is invoked only if both node and ggtt
are not null. Move the null checks to the caller function
xe_ggtt_node_remove().
v2: Move null check below declarations (Tejas)
Fixes: 919bb54e98 ("drm/xe: Fix missing runtime outer protection for ggtt_remove_node")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828092229.3606503-1-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The DMA carveout for the C6x core 0 is at 0xa6000000 and core 1 is at
0xa7000000. These are reversed in DT. While both C6x can access either
region, so this is not normally a problem, but if we start restricting
the memory each core can access (such as with firewalls) the cores
accessing the regions for the wrong core will not work. Fix this here.
Fixes: fae14a1cb8 ("arm64: dts: ti: Add k3-j721e-beagleboneai64")
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240801181232.55027-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The DMA carveout for the C6x core 0 is at 0xa6000000 and core 1 is at
0xa7000000. These are reversed in DT. While both C6x can access either
region, so this is not normally a problem, but if we start restricting
the memory each core can access (such as with firewalls) the cores
accessing the regions for the wrong core will not work. Fix this here.
Fixes: f46d16cf5b ("arm64: dts: ti: k3-j721e-sk: Add DDR carveout memory nodes")
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240801181232.55027-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clocks and clock-names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240818173014.122073-5-krzysztof.kozlowski@linaro.org
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clocks. Drop also redundant assigned-clocks properties, because
core dtschema allows them if clocks are provided.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240818173014.122073-2-krzysztof.kozlowski@linaro.org
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Properties with variable number of items per each device are expected to
have widest constraints in top-level "properties:" block and further
customized (narrowed) in "if:then:". Add missing top-level constraints
for clocks and clock-names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240818173014.122073-1-krzysztof.kozlowski@linaro.org
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Some simplifications from Brent Lu for Chromebooks, a new SoundWire codec
support from Bard Liao, new cs42l43 match entries support from
Charles Keepax, Add quirks from some new Dell laptops from Maciej
Strozek, some ACPI match entries from Balamurugan C, and few bug
fixes from Pierre-Louis Bossart.
v2:
- Add "ASoC: SOF: Intel: hda: support BT link mask in mach_params"
commit to fix the build issue in v1.
Balamurugan C (2):
ASoC: Intel: soc-acpi: Add entry for sof_es8336 in ARL match table.
ASoC: Intel: soc-acpi: Add entry for HDMI_In capture support in ARL
match table
Bard Liao (4):
ASoC: Intel: sof_sdw: add rt1320 amp support
ASoC: SOF: Intel: hda: refactoring topology name fixup for HDA mach
ASoC: Intel: sof_sdw: move ignore_internal_dmic check earlier
ASoC: Intel: sof_sdw: overwrite mach_params->dmic_num
Brent Lu (5):
ASoC: SOF: Intel: hda: refactoring topology name fixup for SDW mach
ASoC: SOF: Intel: hda: support BT link mask in mach_params
ASoC: Intel: skl_hda_dsp_generic: support BT audio offload
ASoC: Intel: skl_hda_dsp_generic: remove hdac-hdmi support
ASoC: Intel: skl_hda_dsp_generic: use sof_hdmi_private to init HDMI
Charles Keepax (3):
ASoC: Intel: soc-acpi: arl: Add match entries for new cs42l43 laptops
ASoC: Intel: soc-acpi: adl: Add match entries for new cs42l43 laptops
ASoC: Intel: soc-acpi: lnl: Add match entries for new cs42l43 laptops
Maciej Strozek (1):
ASoC: Intel: sof_sdw: Add quirks from some new Dell laptops
Pierre-Louis Bossart (2):
ASoC: Intel: sof_sdw: make sof_sdw_quirk static
ASoC: Intel: boards: always check the result of
acpi_dev_get_first_match_dev()
include/sound/soc-acpi.h | 2 +
sound/soc/intel/boards/Kconfig | 2 +-
sound/soc/intel/boards/bytcht_cx2072x.c | 4 +
sound/soc/intel/boards/bytcht_da7213.c | 4 +
sound/soc/intel/boards/bytcht_es8316.c | 2 +-
sound/soc/intel/boards/bytcr_rt5640.c | 2 +-
sound/soc/intel/boards/bytcr_rt5651.c | 2 +-
sound/soc/intel/boards/cht_bsw_rt5645.c | 4 +
sound/soc/intel/boards/cht_bsw_rt5672.c | 4 +
sound/soc/intel/boards/skl_hda_dsp_common.c | 56 ++--
sound/soc/intel/boards/skl_hda_dsp_common.h | 39 +--
sound/soc/intel/boards/skl_hda_dsp_generic.c | 58 ++--
sound/soc/intel/boards/sof_es8336.c | 12 +-
sound/soc/intel/boards/sof_sdw.c | 85 +++++-
sound/soc/intel/boards/sof_sdw_common.h | 2 -
sound/soc/intel/boards/sof_wm8804.c | 4 +
.../intel/common/soc-acpi-intel-adl-match.c | 105 +++++++
.../intel/common/soc-acpi-intel-arl-match.c | 244 +++++++++++++++
.../intel/common/soc-acpi-intel-hda-match.c | 12 +-
.../intel/common/soc-acpi-intel-lnl-match.c | 104 +++++++
sound/soc/sdw_utils/soc_sdw_rt_amp.c | 11 +-
sound/soc/sdw_utils/soc_sdw_utils.c | 19 ++
sound/soc/sof/intel/hda.c | 281 ++++++++----------
23 files changed, 780 insertions(+), 278 deletions(-)
--
2.43.0
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
No driver is calling snd_soc_dpcm_can_be_xxx() functions. We don't need
to have EXPORT_SYMBOL_GPL() for them. This patch-set makes it static function.