Use the existed helper instead of open coding it to make the code cleaner.
There are no functional changes, and also avoid dereferencing bitmap
directly to prepare inventing a new bitmap.
Noted that this patch also export md_bitmap_wait_behind_writes(), which
is necessary for now, and the exported api will be removed in following
patches to convert bitmap apis into ops.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240826074452.1490072-2-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
The local variable will only be used onced, in the error path that
read_balance() failed to find a valid rdev to read. Since now the rdev
is ensured can't be removed from conf while IO is still pending,
remove the local variable and dereference rdev directly.
Since we're here, also remove an extra empty line, and unnecessary
type conversion from sector_t(u64) to unsigned long long.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240801133008.459998-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Because flush sync_work may trigger mddev_suspend() if there are spares,
and this should never be done in IO path because mddev_suspend() is used
to wait for IO.
This problem is found by code review.
Fixes: bc08041b32 ("md: suspend array in md_start_sync() if array need reconfiguration")
Cc: stable@vger.kernel.org
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240801124746.242558-1-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
There are two charger current limit registers:
- Fast charge current limit (which controls current going from the
charger to the battery);
- CHGIN input current limit (which controls current going into the
charger through the cable).
Add the necessary functions to retrieve the CHGIN input limit (from CHARGER
regulator) and maximum fast charge current values, and expose them as power
supply properties.
Tested-by: Henrik Grimler <henrik@grimler.se>
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240816-max77693-charger-extcon-v4-3-050a0a9bfea0@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Commit 223a3b8283 ("power: supply: max17042_battery: use VFSOC for
capacity when no rsns") made it so that capacity on systems without
current sensing would be read from VFSOC instead of RepSOC. However,
the SOC threshold calculation still read RepSOC to get the SOC
regardless of the current sensing option state.
Fix this by applying the same conditional to determine which register
should be read.
This also seems to be the intended behavior as per the datasheet - SOC
alert config value in MiscCFG on setups without current sensing is set
to a value of 0b11, indicating SOC alerts being generated based on
VFSOC, instead of 0b00 which indicates SOC alerts being generated based
on RepSOC.
This fixes an issue on the Galaxy S3/Midas boards, where the alert
interrupt would be constantly retriggered, causing high CPU usage
on idle (around ~12%-15%).
Fixes: e5f3872d20 ("max17042: Add support for signalling change in SOC")
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Henrik Grimler <henrik@grimler.se>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240817-max17042-soc-threshold-fix-v1-1-72b45899c3cc@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
syzbot report a out of bounds in dbSplit, it because dmt_leafidx greater
than num leaves per dmap tree, add a checking for dmt_leafidx in dbFindLeaf.
Shaggy:
Modified sanity check to apply to control pages as well as leaf pages.
Reported-and-tested-by: syzbot+dca05492eff41f604890@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=dca05492eff41f604890
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Document the monitored-battery property, which the existing driver can
use to set certain properties.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20240821215456.962564-8-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Allow users to specify a maximum input current for the device. Some
devices allow up to 3.25A of input current (such as the AXP717), which
may be too much for some implementations.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240821215456.962564-7-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Allow specifying a hard limit of the maximum input current. Some PMICs
such as the AXP717 can pull up to 3.25A, so allow a value to be
specified that clamps this in the event the hardware is not designed
for it.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240821215456.962564-6-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Make reading of the vbus value and configuring of the iio channels
device specific, to allow additional devices (such as the AXP717) to
be supported by this driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240821215456.962564-5-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Move the configuration of battery specific information and available
iio channels from the probe function to a device specific routine,
allowing us to use this driver for devices with slightly different
configurations (such as the AXP717).
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240821215456.962564-4-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN and
POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN values should be immutable
properties of the battery, but for this driver they are writable values
and used as the minimum and maximum values for charging. Remove the
DESIGN designation from these values.
Fixes: 46c202b5f2 ("power: supply: add battery driver for AXP20X and AXP22X PMICs")
Suggested-by: Chen-Yu Tsai <wens@kernel.org>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240821215456.962564-3-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
From netdev/egress, skb->len can include the ethernet header, therefore,
subtract network offset from skb->len when validating IPv6 packet length.
Fixes: 42df6e1d22 ("netfilter: Introduce egress hook")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://lore.kernel.org/r/20240827123411.431388-1-liaochen4@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
fq_dequeue() has a complex logic to find packets in one of the 3 bands.
As Neal found out, it is possible that one band has a deficit smaller
than its weight. fq_dequeue() can return NULL while some packets are
elligible for immediate transmit.
In this case, more than one iteration is needed to refill pband->credit.
With default parameters (weights 589824 196608 65536) bug can trigger
if large BIG TCP packets are sent to the lowest priority band.
Bisected-by: John Sperbeck <jsperbeck@google.com>
Diagnosed-by: Neal Cardwell <ncardwell@google.com>
Fixes: 29f834aa32 ("net_sched: sch_fq: add 3 bands and WRR scheduling")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Link: https://patch.msgid.link/20240824181901.953776-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the debugfs_create_dir() error check. It's safe to pass in error
pointers to the debugfs API, hence the user isn't supposed to include
error checking of the return values.
Signed-off-by: Yang Ruibin <11162571@vivo.com>
Link: https://lore.kernel.org/r/20240827022741.3410294-1-11162571@vivo.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The pwm1_enable attribute of the pwmfan driver influences the mode of
operation, especially in case of a requested pwm1 duty cycle of zero.
Especially setting pwm1_enable to two, should keep the pwm controller
enabled even if the duty cycle is set to zero [1].
This is not the case at the moment, as the pwm controller is disabled
always if pwm1 is set to zero.
This commit tries to fix this behavior.
[1] https://docs.kernel.org/hwmon/pwm-fan.html
Signed-off-by: Johannes Kirchmair <johannes.kirchmair@skidata.com>
Message-ID: <20240827054454.521494-1-mailinglist1@johanneskirchmair.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use the min() macro to simplify the pc87360_init_device() function
and improve its readability.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Message-ID: <20240827070442.40667-1-shenlichuan@vivo.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
SG2042 use an external MCU to provide basic hardware information
and thermal sensors.
Add driver support for the onboard MCU of SG2042.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Message-ID: <IA1PR20MB49536C786048D1E676BB9C20BB822@IA1PR20MB4953.namprd20.prod.outlook.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Due to the design, Sophgo SG2042 use an external MCU to provide
hardware information, thermal information and reset control.
Add bindings for this monitor device.
Signed-off-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Message-ID: <IA1PR20MB49538276F283C4D01364AEB6BB822@IA1PR20MB4953.namprd20.prod.outlook.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Message-ID: <20240822062956.3490387-9-ruanjinjie@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Message-ID: <20240822062956.3490387-8-ruanjinjie@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Message-ID: <20240822062956.3490387-7-ruanjinjie@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Message-ID: <20240822062956.3490387-6-ruanjinjie@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Message-ID: <20240822062956.3490387-5-ruanjinjie@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Message-ID: <20240822062956.3490387-4-ruanjinjie@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Message-ID: <20240822062956.3490387-3-ruanjinjie@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use scoped for_each_child_of_node_scoped() when iterating over device
nodes to make code a bit simpler.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Message-ID: <20240822062956.3490387-2-ruanjinjie@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This removes some boilerplate from the code and will allow adding
future CPUs by just device IDs.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Message-ID: <20240820053558.1052853-1-superm1@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add device tree bindings and an example for max31790 device.
Signed-off-by: Chanh Nguyen <chanh@os.amperecomputing.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-ID: <20240822084808.299884-1-chanh@os.amperecomputing.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support for the OrangePi NEO-01. It uses different registers for PWM
manual mode, set PWM, and read fan speed than previous devices. Valid PWM
input and duty cycle is 1-244, we scale this from 1-255 to maintain
compatibility with the existing interface.
Add OneXPlayer 2 series, OneXFly, and X1 series models. The 2/X1 series use
new registers for turbo button takeover and read fan speed. X1 has an Intel
variant so change the CPU detection at init to only check for the affected
devices. While at it, adjust formatting of some constants and reorder all
cases alphabetically for consistency. Rename OXP_OLD constants to OXP_MINI
for disambiguation. Update code comments for clarity.
Add support for AYANEO models 2S, AIR 1S, Flip series, GEEK 1S, and KUN.
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Tested-by: Kevin Greenberg <kdgreenberg234@protonmail.com>
Tested-by: Joshua Tam <csinaction@pm.me>
Tested-by: Parth Menon <parthasarathymenon@gmail.com>
Tested-by: Philip Müller <philm@manjaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408160329.TLNbIwRC-lkp@intel.com/
Message-ID: <20240822183525.27289-2-derekjohn.clark@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The documented compatible string is "st,stts751", not "stts751". Even if
"stts751" was in use, there's no need to list "stts751" in the DT match
table. The I2C core will strip any vendor prefix and match against the
i2c_device_id table which has an "stts751" entry.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <20240826191811.1416011-1-robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Fixes: 9e8269de10 ("hwmon: (ntc_thermistor) Add DT with IIO support to NTC thermistor driver")
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Message-ID: <20240815083021.756134-1-liuyuntao12@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Message-ID: <20240814024555.3875387-1-liaochen4@huawei.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Some of the newer Microsoft Surface devices (such as the Surface Book
3 and Pro 9) have thermal sensors connected via the Surface Aggregator
Module (the embedded controller on those devices). Add a basic driver
to read out the temperature values of those sensors.
The EC can have up to 16 thermal sensors connected via a single
sub-device, each providing temperature readings and a label string.
Link: https://github.com/linux-surface/surface-aggregator-module/issues/59
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Co-developed-by: Ivor Wanders <ivor@iwanders.net>
Signed-off-by: Ivor Wanders <ivor@iwanders.net>
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Message-ID: <20240811001503.753728-1-luzmaximilian@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Boards G15CF has got a nct6775 chip, but by default there's no use of it
because of resource conflict with WMI method.
Add the board to the WMI monitoring list.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=204807
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Tested-by: Attila <attila@fulop.one>
Message-ID: <20240812152652.1303-1-pauk.denis@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
There is no need to actively disable a regulator that has not been
enabled by the driver, which makes the call to cc2_disable() in the
probe function meaningless, because the probe function never enables
the device's dedicated regulator.
Once the call to cc2_disable() is dropped, the error paths can directly
return dev_err_probe() in all cases.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Message-ID: <20240813-chipcap2-probe-improvements-v2-1-e9a2932a8a00@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Update datasheet references. Replace misleading 'force parameter needed'
with 'must be instantiated explicitly'. Explain the reason for the missing
auto-detection. Mention all supported chips in Kconfig.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Convert driver to with_info hwmon API to simplify the code and
to reduce its size.
No functional change.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use regmap for local caching and for multi-byte operations to be able
to use regmap API functions and to reduce the need for locking in the
driver.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The chip IDs are not used by the driver. Drop them. Use driver data to
store the limit register resolution instead, and use this information
when writing temperature limits to improve chip specific rounding and
to avoid writing into unused register bits.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Checking three configuration register bits and the manufacturer ID
register to auto-detect LM92 is a bit vague. Repeat twice on replicated
register addresses to improve detection accuracy. Check the manufacturer
ID first and bail out immediately without reading the other register if
there is a mismatch to reduce the number of i2c transfers needed in that
case. Also explicitly test for an error from reading the configuration
register to avoid potential situations where the returned error masked
against 0xe0 is 0.
While at it, drop "lm92: Found National Semiconductor LM92 chip" detection
noise.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Use of_property_present() to test for property presence rather than
of_get_property(). This is part of a larger effort to remove callers
of of_get_property() and similar functions. of_get_property() leaks
the DT property data pointer which is a problem for dynamically
allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240731191312.1710417-13-robh@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
If the GSC FW fails to load the GSC HW hangs permanently; the only ways
to recover it are FLR or D3cold entry, with the former only being
supported on driver unload and the latter only on DGFX, for which we
don't need to load the GSC. Therefore, if GSC fails to load there is no
need to try again because the HW is stuck in the error state and the
submission to load the FW would just hang the GSCCS.
Note that, due to wa_14015076503, on MTL the GuC escalates all GSCCS
hangs to full GT resets, which would trigger a new attempt to load the
GSC FW in the post-reset HW re-init; this issue is also fixed by not
attempting to load the GSC FW after an error.
Fixes: 15bd4a67e9 ("drm/i915/gsc: GSC firmware loading")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v6.3+
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240820215952.2290807-1-daniele.ceraolospurio@intel.com
In kmem_buckets_create(), the kmem_buckets object is allocated by
kmem_cache_alloc() from kmem_buckets_cache, but in the failure case,
it's freed by kfree(). This is not wrong, but using kmem_cache_free()
is the more common pattern, so use it.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
If a drive is unable to create IO queues on the initial probe, a
subsequent reset will need to allocate the tagset if IO queue creation
is successful. Without this, blk_mq_update_nr_hw_queues will crash on a
bad pointer due to the invalid tagset.
Fixes: eac3ef2629 ("nvme-pci: split the initial probe from the rest path")
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>