[ Upstream commit e6c2b0f232 ]
Add a new API amdgpu_xcp_drm_dev_free().
After unplug xcp device, need to release xcp drm memory etc.
Co-developed-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Meng Li <li.meng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit da46735229 ]
Move amdgpu_device_health_check into amdgpu_device_gpu_recover to
ensure that if the device is present can be checked before reset
The reason is:
1.During the dpc event, the device where the dpc event occurs is not
present on the bus
2.When both dpc event and ATHUB event occur simultaneously,the dpc thread
holds the reset domain lock when detecting error,and the gpu recover thread
acquires the hive lock.The device is simultaneously in the states of
amdgpu_ras_in_recovery and occurs_dpc,so gpu recover thread will not go to
amdgpu_device_health_check.It waits for the reset domain lock held by the
dpc thread, but dpc thread has not released the reset domain lock.In the dpc
callback slot_reset,to obtain the hive lock, the hive lock is held by the
gpu recover thread at this time.So a deadlock occurred
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21c0ffa612 ]
Try to ensure poison creation handle is completed in time
to set device rma value.
Signed-off-by: Ce Sun <cesun102@amd.com>
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f0245ee95 ]
Update the IPID register value for bad page threshold CPER according to
the latest definition.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e3967a71e ]
The variable `pm_suspend_target_state` is conditionally defined only when
`CONFIG_SUSPEND` is enabled (see `include/linux/suspend.h`). Directly
referencing it without guarding by `#ifdef CONFIG_SUSPEND` causes build
failures when suspend functionality is disabled (e.g., `CONFIG_SUSPEND=n`).
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fd9f22144 ]
The PF's restart worker shouldn't attempt to resume the device on
its own, since its goal is to finish PF and VFs reprovisioning on
the recently reset GuC. Take extra RPM reference while scheduling
a work and release it from the worker or when we cancel a work.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250801142822.180530-4-michal.wajdeczko@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cda3c755b ]
I saw an oops in xe_gem_fault when running the xe-fast-feedback
testlist against the realtime kernel without debug options enabled.
The panic happens after core_hotunplug unbind-rebind finishes.
Presumably what happens is that a process mmaps, unlocks because
of the FAULT_FLAG_RETRY_NOWAIT logic, has no process memory left,
causing ttm_bo_vm_dummy_page() to return VM_FAULT_NOPAGE, since
there was nothing left to populate, and then oopses in
"mem_type_is_vram(tbo->resource->mem_type)" because tbo->resource
is NULL.
It's convoluted, but fits the data and explains the oops after
the test exits.
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250715152057.23254-2-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45fbb51050 ]
The GuC load process will abort if certain status codes (which are
indicative of a fatal error) are reported. Otherwise, it keeps waiting
until the 'success' code is returned. New error codes have been added
in recent GuC releases, so add support for aborting on those as well.
v2: Shuffle HWCONFIG_START to the front of the switch to keep the
ordering as per the enum define for clarity (review feedback by
Jonathan). Also add a description for the basic 'invalid init data'
code which was missing.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Link: https://lore.kernel.org/r/20250726024337.4056272-1-John.C.Harrison@Intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5b69101f9 ]
[WHY]
Last LT automation update can cause crash by referencing current_state and
calling into dc_update_planes_and_stream which may clobber current_state.
[HOW]
Cache relevant stream pointers and iterate through them instead of relying
on the current_state.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 327aba7f55 ]
[why & how]
Header misalignment in struct dmub_cmd_replay_copy_settings_data and
struct dmub_alpm_auxless_data causes incorrect data read between driver
and dmub.
Fix the misalignment and ensure that everything is aligned to 4-byte
boundaries.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3419e1e44 ]
[WHY]
In the worst case, AUX intra-hop done can take hundreds of milliseconds as
each retimer in a link might have to wait a full AUX_RD_INTERVAL to send
LT abort downstream.
[HOW]
Wait 300ms for each retimer in a link to allow time to propagate a LT abort
without infinitely waiting on intra-hop done.
For no-retimer case, keep the max duration at 10ms.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2681bf4ae8 ]
[WHY]
If symclk RCO is enabled, stream encoder may not be receiving an ungated
clock by the time we attempt to set stream attributes when setting dpms
on. Since the clock is gated, register writes to the stream encoder fail.
[HOW]
Move set_stream_attribute call into enable_stream, just after the point
where symclk32_se is ungated.
Logically there is no need to set stream attributes as early as is
currently done in link_set_dpms_on, so this should have no impact beyond
the RCO fix.
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit faab5ea083 ]
Log an error when vcn sram load fails in indirect mode
and return the same error value.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca74cc428f ]
[Why]
When transitioning between topologies such as multi-display to single
display ODM 2:1, pipes might not be freed before use.
[How]
In dc_commit_streams, commit an additional, minimal transition if
original transition is not seamless to ensure pipes are freed.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a6a3374ec ]
timing_adjust_pending is used to defer certain programming sequences
when OTG timing is about to be changed, like with VRR. Insufficient
checking for timing change in this case caused a regression which
reduces PSR Replay residency.
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 400a6da1e9 ]
While we expect config directory names to match PCI device name,
currently we are only scanning provided names for domain, bus,
device and function numbers, without checking their format.
This would pass slightly broken entries like:
/sys/kernel/config/xe/
├── 0000:00:02.0000000000000
│ └── ...
├── 0000:00:02.0x
│ └── ...
├── 0: 0: 2. 0
│ └── ...
└── 0:0:2.0
└── ...
To avoid such mistakes, check if the name provided exactly matches
the canonical PCI device address format, which we recreated from
the parsed BDF data. Also simplify scanf format as it can't really
catch all formatting errors.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250722141059.30707-3-michal.wajdeczko@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d72779c29d ]
As part of this WA GuC will save and restore value of two XE3_Media
control registers that were not included in the HW power context.
Signed-off-by: Sk Anirban <sk.anirban@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://lore.kernel.org/r/20250716101622.3421480-2-sk.anirban@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62aec8a0a5 ]
As pm_runtime_force_suspend() will force the device state to suspend,
the driver needs to ensure no IRQ handlers are currently running. If not
those handlers may find they are now running on suspended hardware
despite holding a PM runtime reference. disable_irq() will sync any
currently running handlers, so move the IRQ disabling to cover the whole
of the forced suspend state to avoid such race conditions.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250903094549.271068-6-ckeepax@opensource.cirrus.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f4bbee069 ]
When an MFD device is added, a platform_device is allocated. If this
device is linked to a DT description, the corresponding OF node is linked
to the new platform device but the OF node's refcount isn't incremented.
As of_node_put() is called during the platform device release, it leads
to a refcount underflow.
Call of_node_get() to increment the OF node's refcount when the node is
linked to the newly created platform device.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250820-mfd-refcount-v1-1-6dcb5eb41756@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ac4890ac3 ]
We observed the initial probe of the da9063 failing in
da9063_get_device_type in about 30% of boots on a Xilinx ZynqMP based
board. The problem originates in da9063_i2c_blockreg_read, which uses
a single bus transaction to turn the register page and then read a
register. On the bus, this should translate to a write to register 0,
followed by a read to the target register, separated by a repeated
start. However, we found that after the write to register 0, the
controller sometimes continues directly with the register address of
the read request, without sending the chip address or a repeated start
in between, which makes the read request invalid.
To fix this, separate turning the page and reading the register into
two separate transactions. This brings the initialization code in line
with the rest of the driver, which uses register maps (which to my
knowledge do not use repeated starts after turning the page). This has
been included in our kernel for several months and was recently
included in a shipped product. For us, it reliably fixes the issue,
and we have not observed any new issues.
While the underlying problem is probably with the i2c controller or
its driver, I still propose a change here in the interest of
robustness: First, I'm not sure this issue can be fixed on the
controller side, since there are other issues related to repeated
start which can't (AR# 60695, AR# 61664). Second, similar problems
might exist with other controllers.
Signed-off-by: Jens Kehne <jens.kehne@agilent.com>
Link: https://lore.kernel.org/r/20250804133754.3496718-1-jens.kehne@agilent.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 364752aa0c ]
clang-21 warns about one uninitialized variable getting dereferenced
in madera_dev_init:
drivers/mfd/madera-core.c:739:10: error: variable 'mfd_devs' is uninitialized when used here [-Werror,-Wuninitialized]
739 | mfd_devs, n_devs,
| ^~~~~~~~
drivers/mfd/madera-core.c:459:33: note: initialize the variable 'mfd_devs' to silence this warning
459 | const struct mfd_cell *mfd_devs;
| ^
| = NULL
The code is actually correct here because n_devs is only nonzero
when mfd_devs is a valid pointer, but this is impossible for the
compiler to see reliably.
Change the logic to check for the pointer as well, to make this easier
for the compiler to follow.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250807071932.4085458-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e1c886791 ]
Relying on other components to include those basic types is unreliable
and may cause compile errors like:
../include/linux/mfd/qnap-mcu.h:13:9: error: unknown type name ‘u32’
13 | u32 baud_rate;
| ^~~
../include/linux/mfd/qnap-mcu.h:17:9: error: unknown type name ‘bool’
17 | bool usb_led;
| ^~~~
So make sure, the types used in the header are available.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250804130726.3180806-2-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf2de43060 ]
qnap_mcu_write can return errors and those were not checked before.
So do that now.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250804130726.3180806-3-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57bf2a312a ]
The IRQ domain is (optionally) added during stmpe_probe, but never removed.
Add the call to stmpe_remove.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20250725070752.338376-1-alexander.stein@ew.tq-group.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81a2c31257 ]
The QIXIS FPGA found on Layerscape boards such as LX2160AQDS, LS1028AQDS
etc deals with power-on-reset timing, muxing etc. Use the simple-mfd-i2c
as its core driver by adding its compatible string (already found in
some dt files). By using the simple-mfd-i2c driver, any child device
will have access to the i2c regmap created by it.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20250707153120.1371719-1-ioana.ciornei@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2734fdbc9b ]
When we are successful in using cpufreq min/max limits,
skip setting the raw MSR limits entirely.
This is necessary to avoid undoing any modification that
the cpufreq driver makes to our sysfs request.
eg. intel_pstate may take our request for a limit
that is valid according to HWP.CAP.MIN/MAX and clip
it to be within the range available in PLATFORM_INFO.
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c97c057d35 ]
On enabling HWP, preserve the reserved bits in MSR_PM_ENABLE.
Also, skip writing the MSR_PM_ENABLE if HWP is already enabled.
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62127655b7 ]
The fopen_or_die() function was previously hardcoded
to open files in read-only mode ("r"), ignoring the
mode parameter passed to it. This patch corrects
fopen_or_die() to use the provided mode argument,
allowing for flexible file access as intended.
Additionally, the call to fopen_or_die() in
err_on_hypervisor() incorrectly used the mode
"ro", which is not a valid fopen mode. This is
fixed to use the correct "r" mode.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cafb47be3f ]
The pmt_telemdir_sort() comparison function was returning a boolean
value (0 or 1) instead of the required negative, zero, or positive
value for proper sorting. This caused unpredictable and incorrect
ordering of telemetry directories named telem0, telem1, ..., telemN.
Update the comparison logic to return -1, 0, or 1 based on the
numerical value extracted from the directory name, ensuring correct
numerical ordering when using scandir.
This change improves stability and correctness when iterating PMT
telemetry directories.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 105eb5dc74 ]
bpf_cookie can fail on perf_event_open(), when it runs after the task_work
selftest. The task_work test causes perf to lower
sysctl_perf_event_sample_rate, and bpf_cookie uses sample_freq,
which is validated against that sysctl. As a result,
perf_event_open() rejects the attr if the (now tighter) limit is
exceeded.
>From perf_event_open():
if (attr.freq) {
if (attr.sample_freq > sysctl_perf_event_sample_rate)
return -EINVAL;
} else {
if (attr.sample_period & (1ULL << 63))
return -EINVAL;
}
Switch bpf_cookie to use sample_period, which is not checked against
sysctl_perf_event_sample_rate.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250925215230.265501-1-mykyta.yatsenko5@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23199d2aa6 ]
Fix incorrect size parameter passed to cpuidle_state_write_file() in
cpuidle_state_disable().
The function was incorrectly using sizeof(disable) which returns the
size of the unsigned int variable (4 bytes) instead of the actual
length of the string stored in the 'value' buffer.
Since 'value' is populated with snprintf() to contain the string
representation of the disable value, we should use the length
returned by snprintf() to get the correct string length for
writing to the sysfs file.
This ensures the correct number of bytes is written to the cpuidle
state disable file in sysfs.
Link: https://lore.kernel.org/r/20250917050820.1785377-1-kaushlendra.kumar@intel.com
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddb61e737f ]
It turns out the second fan on the Dell Precision 490 does not
really support I8K_FAN_TURBO. Setting the fan state to 3 enables
automatic fan control, just like on the other two fans.
The reason why this was misinterpreted as turbo mode was that
the second fan normally spins faster in automatic mode than
in the previous fan states. Yet when in state 3, the fan speed
reacts to heat exposure, exposing the automatic mode setting.
Link: https://github.com/lm-sensors/lm-sensors/pull/383
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250917181036.10972-2-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 584d55be66 ]
Some motherboards require more time to acquire the ACPI mutex,
causing "Failed to acquire mutex" messages to appear in the kernel log.
Increase the timeout from 500ms to 800ms to accommodate these cases.
Signed-off-by: Ben Copeland <ben.copeland@linaro.org>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20250923192935.11339-3-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4363264111 ]
If uprobe handler changes instruction pointer we still execute single
step) or emulate the original instruction and increment the (new) ip
with its length.
This makes the new instruction pointer bogus and application will
likely crash on illegal instruction execution.
If user decided to take execution elsewhere, it makes little sense
to execute the original instruction, so let's skip it.
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20250916215301.664963-3-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e48265501 ]
The NVMe Base Specification 2.1 states that:
"""
A host requests an explicit persistent connection ... by specifying a
non-zero Keep Alive Timer value in the Connect command.
"""
As such if we are starting a persistent connection to a discovery
controller and the KATO is currently 0 we need to update KATO to a non
zero value to avoid continuous timeouts on the target.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efec2e55bd ]
It is possible for drivers to generate xdp packets with data residing
entirely in fragments. To keep parsing headers using direct packet
access, call bpf_xdp_pull_data() to pull headers into the linear data
area.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250922233356.3356453-9-ameryhung@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f12d1137c ]
It is possible for bpf_xdp_adjust_tail() to free all fragments. The
kfunc currently clears the XDP_FLAGS_HAS_FRAGS bit, but not
XDP_FLAGS_FRAGS_PF_MEMALLOC. So far, this has not caused a issue when
building sk_buff from xdp_buff since all readers of xdp_buff->flags
use the flag only when there are fragments. Clear the
XDP_FLAGS_FRAGS_PF_MEMALLOC bit as well to make the flags correct.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20250922233356.3356453-2-ameryhung@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0bf7cd5df ]
In the __arch_prepare_bpf_trampoline() function, retval_off is only
meaningful when save_ret is true, so the current logic is correct.
However, in the original logic, retval_off is only initialized under
certain conditions; for example, in the fmod_ret logic, the compiler is
not aware that the flags of the fmod_ret program (prog) have set
BPF_TRAMP_F_CALL_ORIG, which results in an uninitialized symbol
compilation warning.
So initialize retval_off unconditionally to fix it.
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Link: https://lore.kernel.org/r/20250922062244.822937-2-duanchenghao@kylinos.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d726c4dbe ]
Following deadlock can be triggered easily by lockdep:
WARNING: possible circular locking dependency detected
6.17.0-rc3-00124-ga12c2658ced0 #1665 Not tainted
------------------------------------------------------
check/1334 is trying to acquire lock:
ff1100011d9d0678 (&q->sysfs_lock){+.+.}-{4:4}, at: blk_unregister_queue+0x53/0x180
but task is already holding lock:
ff1100011d9d00e0 (&q->q_usage_counter(queue)#3){++++}-{0:0}, at: del_gendisk+0xba/0x110
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&q->q_usage_counter(queue)#3){++++}-{0:0}:
blk_queue_enter+0x40b/0x470
blkg_conf_prep+0x7b/0x3c0
tg_set_limit+0x10a/0x3e0
cgroup_file_write+0xc6/0x420
kernfs_fop_write_iter+0x189/0x280
vfs_write+0x256/0x490
ksys_write+0x83/0x190
__x64_sys_write+0x21/0x30
x64_sys_call+0x4608/0x4630
do_syscall_64+0xdb/0x6b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&q->rq_qos_mutex){+.+.}-{4:4}:
__mutex_lock+0xd8/0xf50
mutex_lock_nested+0x2b/0x40
wbt_init+0x17e/0x280
wbt_enable_default+0xe9/0x140
blk_register_queue+0x1da/0x2e0
__add_disk+0x38c/0x5d0
add_disk_fwnode+0x89/0x250
device_add_disk+0x18/0x30
virtblk_probe+0x13a3/0x1800
virtio_dev_probe+0x389/0x610
really_probe+0x136/0x620
__driver_probe_device+0xb3/0x230
driver_probe_device+0x2f/0xe0
__driver_attach+0x158/0x250
bus_for_each_dev+0xa9/0x130
driver_attach+0x26/0x40
bus_add_driver+0x178/0x3d0
driver_register+0x7d/0x1c0
__register_virtio_driver+0x2c/0x60
virtio_blk_init+0x6f/0xe0
do_one_initcall+0x94/0x540
kernel_init_freeable+0x56a/0x7b0
kernel_init+0x2b/0x270
ret_from_fork+0x268/0x4c0
ret_from_fork_asm+0x1a/0x30
-> #0 (&q->sysfs_lock){+.+.}-{4:4}:
__lock_acquire+0x1835/0x2940
lock_acquire+0xf9/0x450
__mutex_lock+0xd8/0xf50
mutex_lock_nested+0x2b/0x40
blk_unregister_queue+0x53/0x180
__del_gendisk+0x226/0x690
del_gendisk+0xba/0x110
sd_remove+0x49/0xb0 [sd_mod]
device_remove+0x87/0xb0
device_release_driver_internal+0x11e/0x230
device_release_driver+0x1a/0x30
bus_remove_device+0x14d/0x220
device_del+0x1e1/0x5a0
__scsi_remove_device+0x1ff/0x2f0
scsi_remove_device+0x37/0x60
sdev_store_delete+0x77/0x100
dev_attr_store+0x1f/0x40
sysfs_kf_write+0x65/0x90
kernfs_fop_write_iter+0x189/0x280
vfs_write+0x256/0x490
ksys_write+0x83/0x190
__x64_sys_write+0x21/0x30
x64_sys_call+0x4608/0x4630
do_syscall_64+0xdb/0x6b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
other info that might help us debug this:
Chain exists of:
&q->sysfs_lock --> &q->rq_qos_mutex --> &q->q_usage_counter(queue)#3
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&q->q_usage_counter(queue)#3);
lock(&q->rq_qos_mutex);
lock(&q->q_usage_counter(queue)#3);
lock(&q->sysfs_lock);
Root cause is that queue_usage_counter is grabbed with rq_qos_mutex
held in blkg_conf_prep(), while queue should be freezed before
rq_qos_mutex from other context.
The blk_queue_enter() from blkg_conf_prep() is used to protect against
policy deactivation, which is already protected with blkcg_mutex, hence
convert blk_queue_enter() to blkcg_mutex to fix this problem. Meanwhile,
consider that blkcg_mutex is held after queue is freezed from policy
deactivation, also convert blkg_alloc() to use GFP_NOIO.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c445bffbf2 ]
During normal operation the timers are reprogrammed including an
interrupt acknowledgement. This has no effect as the whole timer
is setup from scratch afterwards. Especially in an interrupt this
has already been done by rttm_timer_interrupt().
Change the behaviour as follows:
- Use rttm_disable_timer() during reprogramming
- Keep rttm_stop_timer() for all other use cases.
Downstream has already tested and confirmed a patch. See
https://github.com/openwrt/openwrt/pull/19468https://forum.openwrt.org/t/support-for-rtl838x-based-managed-switches/57875/3788
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Stephen Howell <howels@allthatwemight.be>
Tested-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20250804080328.2609287-4-markus.stockhausen@gmx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
