Both mutexes are only used in one function each. These functions are only
called by the .apply() callback. As the .apply() calls are serialized by
the core since commit 1cc2e1faaf ("pwm: Add more locking") the mutexes
have no effect apart from runtime overhead. Drop them.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/4f7a2da37adbfe4743564245119045826d86eca6.1750788649.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
The pwm core serializes calls to .apply(), so the driver local lock isn't
needed for that. It only has the effect to serialize .apply() with
.request() and .free() for a different PWM, and .request() and .free
against each other. But given that .request and .free() only do a single
regmap operation under the lock and regmap itself serializes register
accesses, it might happen without the lock that the calls are interleaved
now, but affecting different PWMs, so nothing bad can happen.
So the mutex has no effect and can be dropped.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/6b72104e5e1823170c7c9664189cc0f2ca5c2347.1750788649.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
The pwm core serializes calls to .apply(), so the spinlock adds no
additional protection. Disabling the irq is also irrelevant as the driver
isn't an atomic one and so the callbacks cannot be called from atomic
context.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/d4931dc0c0d657d80722cfe7d97cb4fb4ccec90e.1750788649.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
The two functions making use of the lock are only called transitively from
.apply(). Calls to .apply() are already serialized by the pwm core so the
lock in the driver has no effect and can safely be dropped.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/5ad3417aecd4dc6eca9699e21691e3725ea0bb87.1750788649.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Add trivial PWM driver for Argon40 Fan HAT, which is a RaspberryPi
blower fan hat which can be controlled over I2C. Model this device
as a PWM, so the pwm-fan can be attached to it and handle thermal
zones and RPM management in a generic manner.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20250629220757.936212-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Document trivial PWM on Argon40 Fan HAT, which is a RaspberryPi
blower fan hat which can be controlled over I2C.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/r/20250629220757.936212-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Add support for the PWM IP version 3.0.2, found in MediaTek's
Dimensity 9400 MT6991 and in the MT8196 Chromebook SoC: this
needs a new register offset array and also a different offset
for the PWM_CK_26M_SEL register.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250623120118.109170-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
In preparation for adding support for new SoCs, remove variable
has_ck_26m_sel from pwm_mediatek_of_data and replace it with a
u16 pwm_ck_26m_sel_reg, meant to hold the register offset for
PWM_CK_26M_SEL.
Also, since the reg offset is guaranteed to never be zero, the
logic to check for "has_ck_26m_sel" is changed to check if the
register offset in pwm_ck_26m_sel_reg is more than zero.
Analogously, when writing, use the register offset from platform
data instead of using the PWM_CK_26M_SEL definition.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250623120118.109170-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Add compatible strings for the MediaTek Dimensity 9400 MT6991 and
for the MT8196 Chromebook SoC, having the same PWM IP v3.0.2.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250623120118.109170-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
With CONFIG_PWM_DEBUG=y, the rockchip PWM driver produces warnings like
this:
rockchip-pwm fd8b0010.pwm: .apply is supposed to round down
duty_cycle (requested: 23529/50000, applied: 23542/50000)
This is because the driver chooses ROUND_CLOSEST for purported
idempotency reasons. However, it's possible to keep idempotency while
always rounding down in .apply().
Do this by making .get_state() always round up, and making .apply()
always round down. This is done with u64 maths, and setting both period
and duty to U32_MAX (the biggest the hardware can support) if they would
exceed their 32 bits confines.
Fixes: 12f9ce4a51 ("pwm: rockchip: Fix period and duty cycle approximation")
Fixes: 1ebb74cf35 ("pwm: rockchip: Add support for hardware readout")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250616-rockchip-pwm-rounding-fix-v2-1-a9c65acad7b6@collabora.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Add support for STM32MP25 SoC. Use newly introduced compatible to handle
new features along with registers and bits diversity.
The MFD part of the driver fills in ipidr, so it is used to check the
hardware configuration register, when available to gather the number
of PWM channels and complementary outputs.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20250110091922.980627-5-fabrice.gasnier@foss.st.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Add PWM controller for SG2044 on base of SG2042.
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Tested-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Longbin Li <looong.bin@gmail.com>
Link: https://lore.kernel.org/r/20250528101139.28702-4-looong.bin@gmail.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
As the driver logic can be used in both SG2042 and SG2044, it
will be better to reorganize the code structure.
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Tested-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Longbin Li <looong.bin@gmail.com>
Link: https://lore.kernel.org/r/20250528101139.28702-3-looong.bin@gmail.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Add compatible string for PWM controller on SG2044.
Tested-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Longbin Li <looong.bin@gmail.com>
Link: https://lore.kernel.org/r/20250528101139.28702-2-looong.bin@gmail.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
This fix ensures consistent rounding and avoids mismatches
between applied and reported PWM values that could trigger false
idempotency failures in debug checks
This change ensures:
- real_period is now calculated using DIV_ROUND_UP_ULL() to avoid underestimation.
- duty_cycle is rounded up to match the fractional computation in apply()
- apply() truncates the result to compensate for get_state's rounding up logic
These fixes resolve issues like:
.apply is supposed to round down duty_cycle (requested: 360/504000, applied: 361/504124)
.apply is not idempotent (ena=1 pol=0 1739692/4032985) -> (ena=1 pol=0 1739630/4032985)
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505080303.dBfU5YMS-lkp@intel.com/
Co-developed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
Link: https://lore.kernel.org/r/20250529035341.51736-4-nylon.chen@sifive.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
The `frac` variable represents the pulse inactive time, and the result
of this algorithm is the pulse active time. Therefore, we must reverse
the result.
Although the SiFive Reference Manual states "pwms >= pwmcmpX -> HIGH",
the hardware behavior is inverted due to a fixed XNOR with 0. As a result,
the pwmcmp register actually defines the low (inactive) portion of the pulse.
The reference is SiFive FU740-C000 Manual[0]
Link: https://sifive.cdn.prismic.io/sifive/1a82e600-1f93-4f41-b2d8-86ed8b16acba_fu740-c000-manual-v1p6.pdf [0]
Co-developed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Zong Li <zong.li@sifive.com>
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
Link: https://lore.kernel.org/r/20250529035341.51736-3-nylon.chen@sifive.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
The SpacemiT K1 SoC uses devices similar to the ones on PXA SoCs. Add
ARCH_SPACEMIT as one of the possible architectures this driver can be
enabled for.
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20250429085048.1310409-6-guodong@riscstar.com
[ukleinek: reword commit log]
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Support optional reset control for the PWM PXA driver.
During probe, it acquires the reset controller using
devm_reset_control_get_optional_exclusive_deasserted() to get and deassert
the reset controller to enable the PWM channel.
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20250429085048.1310409-3-guodong@riscstar.com
[ukleinek: Fix conflict with commit df08fff8ad ("pwm: pxa: Improve using dev_err_probe()")]
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
The SpacemiT K1 SoC reuses the Marvell PXA910-compatible PWM controller
with one notable difference: the addition of a resets property. To make
the device tree pass schema validation (make dtbs_check W=3), this patch
updates the binding to accept spacemit,k1-pwm as a compatible string, when
used in conjunction with the fallback marvell,pxa910-pwm.
Support for the optional resets property is also added, as it is required
by the K1 integration but was not present in the original Marvell bindings.
Since the PWM reset line may be deasserted during the early bootloader
stage, making the resets property optional avoids potential
double-deassertion, which could otherwise cause flickering on displays
that use PWM for backlight control.
Additionally, this patch adjusts the required value of the #pwm-cells
property for the new compatible string:
- For "spacemit,k1-pwm", #pwm-cells must be set to 3.
- For existing Marvell compatibles, #pwm-cells remains 1.
Background of #pwm-cells change is by an ongoing community discussion
about increasing the #pwm-cells value from 1 to 3 for all Marvell PXA PWM
devices. These devices are currently the only ones whose bindings do not
pass the line index as the first argument. See [1] for further details.
[1] https://lore.kernel.org/all/cover.1738842938.git.u.kleine-koenig@baylibre.com/
Reviewed-by: Rob Herring (Arm) <robh@kernel.org> # v2
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Link: https://lore.kernel.org/r/20250429085048.1310409-2-guodong@riscstar.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
With this change each pwmchip defining the new-style waveform callbacks
can be accessed from userspace via a character device. Compared to the
sysfs-API this is faster and allows to pass the whole configuration in a
single ioctl allowing atomic application and thus reducing glitches.
On an STM32MP13 I see:
root@DistroKit:~ time pwmtestperf
real 0m 1.27s
user 0m 0.02s
sys 0m 1.21s
root@DistroKit:~ rm /dev/pwmchip0
root@DistroKit:~ time pwmtestperf
real 0m 3.61s
user 0m 0.27s
sys 0m 3.26s
pwmtestperf does essentially:
for i in 0 .. 50000:
pwm_set_waveform(duty_length_ns=i, period_length_ns=50000, duty_offset_ns=0)
and in the presence of /dev/pwmchip0 is uses the ioctls introduced here,
without that device it uses /sys/class/pwm/pwmchip0.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/ad4a4e49ae3f8ea81e23cac1ac12b338c3bf5c5b.1746010245.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
After enabling the clocks each error path must disable the clocks again.
One of them failed to do so. Unify the error paths to use goto to make it
harder for future changes to add a similar bug.
Fixes: 7ca59947b5 ("pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config()")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250704172728.626815-2-u.kleine-koenig@baylibre.com
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Commit 9dd42d019e ("pwm: Allow pwm state transitions from an invalid
state") intended to allow some state transitions that were not allowed
before. The idea is sane and back then I also got the code comment
right, but the check for enabled is bogus. This resulted in state
transitions for enabled states to be allowed to have invalid duty/period
settings and thus it can happen that low-level drivers get requests for
invalid states🙄.
Invert the check to allow state transitions for disabled states only.
Fixes: 9dd42d019e ("pwm: Allow pwm state transitions from an invalid state")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250704172416.626433-2-u.kleine-koenig@baylibre.com
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
1. Defined a macro for the hard coded value.
2. "access" field in the request structure is of type "u8".
Updated the mask accordingly.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Link: https://patch.msgid.link/20250704043857.19158-4-kalesh-anakkur.purayil@broadcom.com
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
bnxt_qplib_put_sges is calculating the length in
a signed int. So handling the 2G message size
is not working since it is considered as negative.
Use a unsigned number to calculate the total message
length. As per the spec, IB message size shall be
between zero and 2^31 bytes (inclusive). So adding
a check for 2G message size.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Link: https://patch.msgid.link/20250704043857.19158-3-kalesh-anakkur.purayil@broadcom.com
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Since both "length" and "offset" are of type u32, there is
no functional issue here.
Reviewed-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250704043857.19158-2-kalesh-anakkur.purayil@broadcom.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
GFP_NOWARN silences all warnings on dma_alloc_coherent() failure,
which might otherwise help with troubleshooting.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250703113905.3597124-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
hr_dev->pgdir_list and hr_dev->pgdir_mutex won't be initialized if
CQ/QP record db are not enabled, but they are also needed when using
SRQ with SRQ record db enabled. Simplified the logic by always
initailizing the reosurces.
Fixes: c9813b0b99 ("RDMA/hns: Support SRQ record doorbell")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250703113905.3597124-5-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
ACK_REQ_FREQ indicates the number of packets (after MTU fragmentation)
HW sends before setting an ACK request. When MTU is greater than or
equal to 1024, the current ACK_REQ_FREQ value causes HW to request an
ACK for every MTU fragment. The processing of a large number of ACKs
severely impacts HW performance when sending large size payloads.
Get message length of ack_req from FW so that we can adjust this
parameter according to different situations. There are several
constraints for ACK_REQ_FREQ:
1. mtu * (2 ^ ACK_REQ_FREQ) should not be too large, otherwise it may
cause some unexpected retries when sending large payload.
2. ACK_REQ_FREQ should be larger than or equal to LP_PKTN_INI.
3. ACK_REQ_FREQ must be equal to LP_PKTN_INI when using LDCP
or HC3 congestion control algorithm.
Fixes: 56518a603f ("RDMA/hns: Modify the value of long message loopback slice")
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://patch.msgid.link/20250703113905.3597124-4-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The nreaders and loops variables are exposed as module parameters, which,
in certain combinations, can lead to multiplication overflow.
Besides, loops parameter is defined as long, while through the code is
used as int, which can cause truncation on 64-bit kernels and possible
zeroes where they shouldn't appear.
Since code uses result of multiplication as int anyway, it only makes sense
to replace loops with int. Multiplication overflow check is also added
due to possible multiplication between two very big numbers.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 653ed64b01 ("refperf: Add a test to measure performance of read-side synchronization")
Signed-off-by: Artem Sadovnikov <a.sadovnikov@ispras.ru>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
When a stall is detected, the state of each NOCB CPU is dumped along
with the state of each NOCB group. The latter part however is
incidentally ignored if the NOCB group leader happens not to be
offloaded itself.
Fix this to make sure related precious informations aren't lost over
a stall report.
Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
The intermediary value was included in the wrong
hash state. While there, adapt to user-space by
setting the timestamp to 0 if stuck and inserting
the values nevertheless.
Acked-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Markus Theil <theil.markus@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The `dma_unmap_sg()` functions should be called with the same nents as the
`dma_map_sg()`, not the value the map function returned.
Fixes: c957f8b3e2 ("crypto: inside-secure - avoid unmapping DMA memory that was not mapped")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The __snp_alloc_firmware_pages() helper allocates pages in the firmware
state (alloc + rmpupdate). In case of failed rmpupdate, it tries
reclaiming pages with already changed state. This requires calling
the PSP firmware and since there is sev_cmd_mutex to guard such calls,
the helper takes a "locked" parameter so specify if the lock needs to
be held.
Most calls happen from snp_alloc_firmware_page() which executes without
the lock. However
commit 24512afa43 ("crypto: ccp: Handle the legacy TMR allocation when SNP is enabled")
switched sev_fw_alloc() from alloc_pages() (which does not call the PSP) to
__snp_alloc_firmware_pages() (which does) but did not account for the fact
that sev_fw_alloc() is called from __sev_platform_init_locked()
(via __sev_platform_init_handle_tmr()) and executes with the lock held.
Add a "locked" parameter to __snp_alloc_firmware_pages().
Make sev_fw_alloc() use the new parameter to prevent potential deadlock in
rmp_mark_pages_firmware() if rmpupdate() failed.
Fixes: 24512afa43 ("crypto: ccp: Handle the legacy TMR allocation when SNP is enabled")
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Pratik R. Sampat <prsampat@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Syzbot reported an issue in hfsplus filesystem:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 4400 at fs/hfsplus/extents.c:346
hfsplus_free_extents+0x700/0xad0
Call Trace:
<TASK>
hfsplus_file_truncate+0x768/0xbb0 fs/hfsplus/extents.c:606
hfsplus_write_begin+0xc2/0xd0 fs/hfsplus/inode.c:56
cont_expand_zero fs/buffer.c:2383 [inline]
cont_write_begin+0x2cf/0x860 fs/buffer.c:2446
hfsplus_write_begin+0x86/0xd0 fs/hfsplus/inode.c:52
generic_cont_expand_simple+0x151/0x250 fs/buffer.c:2347
hfsplus_setattr+0x168/0x280 fs/hfsplus/inode.c:263
notify_change+0xe38/0x10f0 fs/attr.c:420
do_truncate+0x1fb/0x2e0 fs/open.c:65
do_sys_ftruncate+0x2eb/0x380 fs/open.c:193
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
To avoid deadlock, Commit 31651c6071 ("hfsplus: avoid deadlock
on file truncation") unlock extree before hfsplus_free_extents(),
and add check wheather extree is locked in hfsplus_free_extents().
However, when operations such as hfsplus_file_release,
hfsplus_setattr, hfsplus_unlink, and hfsplus_get_block are executed
concurrently in different files, it is very likely to trigger the
WARN_ON, which will lead syzbot and xfstest to consider it as an
abnormality.
The comment above this warning also describes one of the easy
triggering situations, which can easily trigger and cause
xfstest&syzbot to report errors.
[task A] [task B]
->hfsplus_file_release
->hfsplus_file_truncate
->hfs_find_init
->mutex_lock
->mutex_unlock
->hfsplus_write_begin
->hfsplus_get_block
->hfsplus_file_extend
->hfsplus_ext_read_extent
->hfs_find_init
->mutex_lock
->hfsplus_free_extents
WARN_ON(mutex_is_locked) !!!
Several threads could try to lock the shared extents tree.
And warning can be triggered in one thread when another thread
has locked the tree. This is the wrong behavior of the code and
we need to remove the warning.
Fixes: 31651c6071 ("hfsplus: avoid deadlock on file truncation")
Reported-by: syzbot+8c0bc9f818702ff75b76@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/00000000000057fa4605ef101c4c@google.com/
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20250529061807.2213498-1-frank.li@vivo.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Since 5.10, splice() or sendfile() return EINVAL. This was
caused by commit 36e2c7421f ("fs: don't allow splice read/write
without explicit ops").
This patch initializes the splice_write field in file_operations, like
most file systems do, to restore the functionality.
Fixes: 36e2c7421f ("fs: don't allow splice read/write without explicit ops")
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20250529140033.2296791-2-frank.li@vivo.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Since 5.10, splice() or sendfile() return EINVAL. This was
caused by commit 36e2c7421f ("fs: don't allow splice read/write
without explicit ops").
This patch initializes the splice_write field in file_operations, like
most file systems do, to restore the functionality.
Fixes: 36e2c7421f ("fs: don't allow splice read/write without explicit ops")
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20250529140033.2296791-1-frank.li@vivo.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250704075442.3221330-1-sakari.ailus@linux.intel.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250704075442.3221283-1-sakari.ailus@linux.intel.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Make several autosuspend functions mark last busy stamp and update
the documentation accordingly (Sakari Ailus).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmhjrvQSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1aigIAKypscFSfd/WsAlP4orLtd4xiLi7KQHa
NrOYv7sZBVHgx4S9BGqHavYM3qhOBH5qCg+yBtqb8v6vp/TIlJjF2v3+C8uAXAnl
9GI5Gc6sZp/lMhf5Vb4Ibf58/P9lg4A7mIvM+LtfeEUMTlRrp47Q/RQ0ah7S4tDj
rFyC92QmBnkDLoyQp5IbCWkdjlqGgyTZzz/+XnfV9fWwX1aiXqaB4EZ2nXSAlyBx
awvA4/t662SWlHsdQqll9vS/+ZB39LEWwa1jJ7XGIK8t6GSH+TTys3S9/PHR/ua3
Dlcd+14plDGlSOy97hY+z6NdSgxH/qcpRgFduu5KwVqEwo2fqNkeV9Q=
=pFYw
-----END PGP SIGNATURE-----
Merge tag 'pm-runtime-6.17-rc1'
Runtime PM updates related to autosuspend for 6.17
Make several autosuspend functions mark last busy stamp and update
the documentation accordingly (Sakari Ailus).
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Merge in 6.16 io_uring fixes, to avoid clashes with pending net and
settings changes.
* io_uring-6.16:
io_uring: gate REQ_F_ISREG on !S_ANON_INODE as well
io_uring/kbuf: flag partial buffer mappings
io_uring/net: mark iov as dynamically allocated even for single segments
io_uring: fix resource leak in io_import_dmabuf()
io_uring: don't assume uaddr alignment in io_vec_fill_bvec
io_uring/rsrc: don't rely on user vaddr alignment
io_uring/rsrc: fix folio unpinning
io_uring: make fallocate be hashed work
->d_compare() weirdness and parallel lookups
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaGc7XwAKCRBZ7Krx/gZQ
6+vZAQDRVSFm5thegwyUQfUawE/Ocl/4lqJyumiHfjy36wESKgEA9UH2Vug83YK8
pTvs2qRy+2uSX3G+9DqA2iATnIrCtAk=
=ali5
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull /proc/sys dcache lookup fix from Al Viro:
"Fix for the breakage spotted by Neil in the interplay between
/proc/sys ->d_compare() weirdness and parallel lookups"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix proc_sys_compare() handling of in-lookup dentries
preventing realtime tasks from running
- Avoid a race condition during migrate-swapping two tasks
- Fix the string reported for the "none" dynamic preemption option
-----BEGIN PGP SIGNATURE-----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=ubM9
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Fix the calculation of the deadline server task's runtime as this
mishap was preventing realtime tasks from running
- Avoid a race condition during migrate-swapping two tasks
- Fix the string reported for the "none" dynamic preemption option
* tag 'sched_urgent_for_v6.16_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix dl_server runtime calculation formula
sched/core: Fix migrate_swap() vs. hotplug
sched: Fix preemption string of preempt_dynamic_none
