[ Upstream commit ae5c2bee16 ]
Rename extra_dw to extra_bytes and document what it's for.
The value is already used as if it were bytes in vcn_v4_0.c
and in amdgpu_ring_init. Just adjust the dword count in
jpeg_v1_0.c so that it becomes a byte count.
v2:
Rename extra_dw to extra_bytes as discussed during review.
Fixes: c8c1a1d2ef ("drm/amdgpu: define and add extra dword for jpeg ring")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e6a43aeb71 ]
Currently, the srcu_gp_start_if_needed() is always be invoked in
preempt disable's critical section, this commit therefore remove
redundant preempt_disable/enable() in srcu_gp_start_if_needed()
and adds a call to lockdep_assert_preemption_disabled() in order
to enable lockdep to diagnose mistaken invocations of this function
from preempts-enabled code.
Fixes: 65b4a59557 ("srcu: Make Tiny SRCU explicitly disable preemption")
Signed-off-by: Zqiang <qiang.zhang@linux.dev>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b184c3480 ]
The persistent_buffer agreement is false when hda_cl_prepare() is
called. We should use the same value when hda_cl_cleanup() is called.
Fixes: 5d5cb86fb4 ("ASoC: SOF: Intel: hda-sdw-bpt: add helpers for SoundWire BPT DMA")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250915024853.1153518-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a5df0ec47 ]
There is only one wiphy, so extra calls must be removed.
For calls that need to remain per-wiphy, use mt7996_for_each_phy
Fixes: 69d54ce749 ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Link: https://patch.msgid.link/20250915075910.47558-1-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b660ee10a ]
In vendor driver, size of group cal and dpd cal for mt7981 includes 6G
although the chip doesn't support it.
mt76 doesn't take this into account which results in reading from the
incorrect offset.
For devices with precal, this would lead to lower bitrate.
Fix this by aligning groupcal size with vendor driver and switch to
freq_list_v2 in mt7915_dpd_freq_idx in order to get the correct offset.
Below are iwinfo of the test device with two clients connected
(iPhone 16, Intel AX210).
Before :
Mode: Master Channel: 36 (5.180 GHz) HT Mode: HE80
Center Channel 1: 42 2: unknown
Tx-Power: 23 dBm Link Quality: 43/70
Signal: -67 dBm Noise: -92 dBm
Bit Rate: 612.4 MBit/s
Encryption: WPA3 SAE (CCMP)
Type: nl80211 HW Mode(s): 802.11ac/ax/n
Hardware: embedded [MediaTek MT7981]
After:
Mode: Master Channel: 36 (5.180 GHz) HT Mode: HE80
Center Channel 1: 42 2: unknown
Tx-Power: 23 dBm Link Quality: 43/70
Signal: -67 dBm Noise: -92 dBm
Bit Rate: 900.6 MBit/s
Encryption: WPA3 SAE (CCMP)
Type: nl80211 HW Mode(s): 802.11ac/ax/n
Hardware: embedded [MediaTek MT7981]
Tested-on: mt7981 20240823
Fixes: 19a954edec ("wifi: mt76: mt7915: add mt7986, mt7916 and mt7981 pre-calibration")
Signed-off-by: Zhi-Jun You <hujy652@gmail.com>
Link: https://patch.msgid.link/20250909064824.16847-1-hujy652@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 809054a60d ]
Do not use bitmask in mt7996_wed_rro_addr DMA descriptor in order to not
break endianness
Fixes: 950d0abb5c ("wifi: mt76: mt7996: add wed rx support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250909-mt7996-rro-rework-v5-11-7d66f6eb7795@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cffed52dbf ]
In order to properly set the number of rx packets for primary WED device
if hif device is available, move hif pointer initialization before
running mt7996_mmio_wed_init routine.
Fixes: 83eafc9251 ("wifi: mt76: mt7996: add wed tx support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250909-mt7996-rro-rework-v5-9-7d66f6eb7795@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77ff8caf3b ]
Fix the second phy tx queue initialization if hif device is not
available for MT7990 chipset.
Fixes: 83eafc9251 ("wifi: mt76: mt7996: add wed tx support")
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Co-developed-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Co-developed-by: Rex Lu <rex.lu@mediatek.com>
Signed-off-by: Rex Lu <rex.lu@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250909-mt7996-rro-rework-v5-8-7d66f6eb7795@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe5fffadc6 ]
In order to avoid a possible NULL pointer dereference in
mt7996_mac_sta_init_link routine, move the phy pointer check before
running mt7996_mac_sta_init_link() in mt7996_mac_sta_add_links routine.
Fixes: dd82a9e02c ("wifi: mt76: mt7996: Rely on mt7996_sta_link in sta_add/sta_remove callbacks")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250830-mt7996_mac_sta_add_links-fix-v1-1-4219fb8755ee@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit afff432554 ]
Do not always use deflink_id in link_sta_rc_update mac80211
callback but use the proper link_id provided by mac80211.
Fixes: 0762bdd302 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250901-mt7996-fix-link_sta_rc_update-callback-v1-1-e24caf196222@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42754b7de2 ]
In mt76_wmac_probe(), when the mt76_alloc_device() call succeeds, memory
is allocated for both struct ieee80211_hw and a workqueue. However, on
the error path, the workqueue is not freed. Fix that by calling
mt76_free_device() on the error path.
Fixes: c8846e1015 ("mt76: add driver for MT7603E and MT7628/7688")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://patch.msgid.link/20250709145532.41246-1-abdun.nihaal@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bbe1255fc ]
When the destroy CM ID timeout kicks in, you typically get a storm of
them which creates a log flooding. Hence, change pr_err() to
pr_err_ratelimited() in cm_destroy_id_wait_timeout().
Fixes: 96d9cbe2f2 ("RDMA/cm: add timeout to cm_destroy_id wait")
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Link: https://patch.msgid.link/20250912100525.531102-1-haakon.bugge@oracle.com
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 786eb990cf ]
If register_node() returns an error, it is not handled correctly.
The function will proceed further and try to register CPUs under the
node, which is not correct.
So, in this patch, if register_node() returns an error, we return
immediately from the function.
Link: https://lkml.kernel.org/r/20250822084845.19219-1-donettom@linux.ibm.com
Fixes: 76b67ed9dc ("[PATCH] node hotplug: register cpu: remove node struct")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Donet Tom <donettom@linux.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f272210b28 ]
The doorbell feature temporarily overrides the inbound translation to point
to the address stored in epf_test->db_bar.phys_addr, i.e., it calls
set_bar() twice without ever calling clear_bar(), as calling clear_bar()
would clear the BAR's PCI address assigned by the host.
Thus, when disabling the doorbell, restore the inbound translation to point
to the memory allocated for the BAR.
Without this, running the PCI endpoint kselftest doorbell test case more
than once would fail.
Fixes: eff0c286aa ("PCI: endpoint: pci-epf-test: Add doorbell test support")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250908161942.534799-2-cassel@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7dfd80f70e ]
When the watchdog gets enabled with this driver, it leaves enough time
for the core watchdog subsystem to start pinging it. But when the
watchdog is already started by hardware or by the boot loader, little
time remains before it fires and it happens that the core watchdog
subsystem doesn't have time to start pinging it.
Until commit 19ce9490aa ("watchdog: mpc8xxx: use the core worker
function") pinging was managed by the driver itself and the watchdog
was immediately pinged by setting the timer expiry to 0.
So restore similar behaviour by pinging it when enabling it so that
if it was already enabled the watchdog timer counter is reloaded.
Fixes: 19ce9490aa ("watchdog: mpc8xxx: use the core worker function")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdbb4a2d2a ]
The code tries to update the intel_oc_wdt_info data structure if the
watchdog is locked. That data structure is marked as const and can not
be written into. Copy it into struct intel_oc_wdt and modify it there
to fix the problem.
Reported-by: Petar Kulić <cooleech@gmail.com>
Cc: Diogo Ivo <diogo.ivo@siemens.com>
Fixes: 535d1784d8 ("watchdog: Add driver for Intel OC WDT")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Diogo Ivo <diogo.ivo@siemens.com>
Tested-by: Diogo Ivo <diogo.ivo@siemens.com>
Link: https://lore.kernel.org/linux-watchdog/20250818031838.3359-1-diogo.ivo@tecnico.ulisboa.pt/T/#t
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2910913ef8 ]
srws1_remove label can be only reached only if LEDS subsystem is enabled. To
avoid putting horryfing ifdef second time around the label, just perform
the cleanup and exit immediately directly.
Fixes: a84eeacbf9 ("HID: steelseries: refactor probe() and remove()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509090334.76D4qGtW-lkp@intel.com/
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 944b6b216c ]
KCSAN reported a data-race on the `ipvs->enable` flag, which is
written in the control path and read concurrently from many other
contexts.
Following a suggestion by Julian, this patch fixes the race by
converting all accesses to use `WRITE_ONCE()/READ_ONCE()`.
This lightweight approach ensures atomic access and acts as a
compiler barrier, preventing unsafe optimizations where the flag
is checked in loops (e.g., in ip_vs_est.c).
Additionally, the `enable` checks in the fast-path hooks
(`ip_vs_in_hook`, `ip_vs_out_hook`, `ip_vs_forward_icmp`) are
removed. These are unnecessary since commit 857ca89711
("ipvs: register hooks only with services"). The `enable=0`
condition they check for can only occur in two rare and non-fatal
scenarios: 1) after hooks are registered but before the flag is set,
and 2) after hooks are unregistered on cleanup_net. In the worst
case, a single packet might be mishandled (e.g., dropped), which
does not lead to a system crash or data corruption. Adding a check
in the performance-critical fast-path to handle this harmless
condition is not a worthwhile trade-off.
Fixes: 857ca89711 ("ipvs: register hooks only with services")
Reported-by: syzbot+1651b5234028c294c339@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1651b5234028c294c339
Suggested-by: Julian Anastasov <ja@ssi.bg>
Link: https://lore.kernel.org/lvs-devel/2189fc62-e51e-78c9-d1de-d35b8e3657e3@ssi.bg/
Signed-off-by: Zhang Tengfei <zhtfdev@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba941796d7 ]
Since the ahash_region() macro was redefined to calculate the region
index solely from HTABLE_REGION_BITS, the htable_bits parameter became
unused.
Remove the unused htable_bits argument and its call sites, simplifying
the code without changing semantics.
Fixes: 8478a729c0 ("netfilter: ipset: fix region locking in hash types")
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Reviewed-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 372fdb5c75 ]
When using KSM (Key Scatter-gather Memory) access mode, the HW requires
the IOVA to be aligned to the selected page size.
Without this alignment, the HW may not function correctly.
Currently, mlx5_umem_mkc_find_best_pgsz() does not filter out page sizes
that would result in misaligned IOVAs for KSM mode. This can lead to
selecting page sizes that are incompatible with the given IOVA.
Fix this by filtering the page size bitmap when in KSM mode, keeping
only page sizes to which the IOVA is aligned to.
Fixes: fcfb03597b ("RDMA/mlx5: Align mkc page size capability check to PRM")
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20250824144839.154717-1-edwards@nvidia.com
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a3aaaa9fc ]
This variable used in the error path was not defined according to Ruff.
msg_format.attr_set is used instead, presumably the one that was
supposed to be used originally.
This is linked to Ruff error F821 [1]:
An undefined name is likely to raise NameError at runtime.
Fixes: 1769e2be4b ("tools/net/ynl: Add 'sub-message' attribute decoding to ynl")
Link: https://docs.astral.sh/ruff/rules/undefined-name/ [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Link: https://patch.msgid.link/20250909-net-next-ynl-ruff-v1-1-238c2bccdd99@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1c4350327 ]
The comparison function cmp_loc_by_count() used for sorting stack trace
locations in debugfs currently returns -1 if a->count > b->count and 1
otherwise. This breaks the antisymmetry property required by sort(),
because when two counts are equal, both cmp(a, b) and cmp(b, a) return
1.
This can lead to undefined or incorrect ordering results. Fix it by
updating the comparison logic to explicitly handle the case when counts
are equal, and use cmp_int() to ensure the comparison function adheres
to the required mathematical properties of antisymmetry.
Fixes: 553c0369b3 ("mm/slub: sort debugfs output by frequency of stack traces")
Reviewed-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33f5c69c4d ]
Fix iio_convert_raw_to_processed() offset handling for channels without
a scale attribute.
The offset has been applied to the raw64 value not to the original raw
value. Use the raw64 value so that the offset is taken into account.
Fixes: 14b457fdde ("iio: inkern: apply consumer scale when no channel scale is available")
Cc: Liam Beguin <liambeguin@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250831104825.15097-3-hansg@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f85406bf8 ]
There is an issue with the handling of negative channel scales
in iio_convert_raw_to_processed_unlocked() when the channel-scale
is of the IIO_VAL_INT_PLUS_[MICRO|NANO] type:
Things work for channel-scale values > -1.0 and < 0.0 because of
the use of signed values in:
*processed += div_s64(raw64 * (s64)scale_val2 * scale, 1000000LL);
Things will break however for scale values < -1.0. Lets for example say
that raw = 2, (caller-provided)scale = 10 and (channel)scale_val = -1.5.
The result should then be 2 * 10 * -1.5 = -30.
channel-scale = -1.5 means scale_val = -1 and scale_val2 = 500000,
now lets see what gets stored in processed:
1. *processed = raw64 * scale_val * scale;
2. *processed += raw64 * scale_val2 * scale / 1000000LL;
1. Sets processed to 2 * -1 * 10 = -20
2. Adds 2 * 500000 * 10 / 1000000 = 10 to processed
And the end result is processed = -20 + 10 = -10, which is not correct.
Fix this by always using the abs value of both scale_val and scale_val2
and if either is negative multiply the end-result by -1.
Note there seems to be an unwritten rule about negative
IIO_VAL_INT_PLUS_[MICRO|NANO] values that:
i. values > -1.0 and < 0.0 are written as val=0 val2=-xxx
ii. values <= -1.0 are written as val=-xxx val2=xxx
But iio_format_value() will also correctly display a third option:
iii. values <= -1.0 written as val=-xxx val2=-xxx
Since iio_format_value() uses abs(val) when val2 < 0.
This fix also makes iio_convert_raw_to_processed() properly handle
channel-scales using this third option.
Fixes: 48e44ce0f8 ("iio:inkern: Add function to read the processed value")
Cc: Matteo Martelli <matteomartelli3@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20250831104825.15097-2-hansg@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0dc7117da8 ]
Index allocation requires at least one bit in the $BITMAP attribute to
track usage of index entries. If the bitmap is empty while index blocks
are already present, this reflects on-disk corruption.
syzbot triggered this condition using a malformed NTFS image. During a
rename() operation involving a long filename (which spans multiple
index entries), the empty bitmap allowed the name to be added without
valid tracking. Subsequent deletion of the original entry failed with
-ENOENT, due to unexpected index state.
Reject such cases by verifying that the bitmap is not empty when index
blocks exist.
Reported-by: syzbot+b0373017f711c06ada64@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b0373017f711c06ada64
Fixes: d99208b919 ("fs/ntfs3: cancle set bad inode after removing name fails")
Tested-by: syzbot+b0373017f711c06ada64@syzkaller.appspotmail.com
Signed-off-by: Moon Hee Lee <moonhee.lee.ca@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 736fc7bf5f ]
The MFT record relative to the file being opened contains its runlist,
an array containing information about the file's location on the physical
disk. Analysis of all Call Stack paths showed that the values of the
runlist array, from which LCNs are calculated, are not validated before
run_unpack function.
The run_unpack function decodes the compressed runlist data format
from MFT attributes (for example, $DATA), converting them into a runs_tree
structure, which describes the mapping of virtual clusters (VCN) to
logical clusters (LCN). The NTFS3 subsystem also has a shortcut for
deleting files from MFT records - in this case, the RUN_DEALLOCATE
command is sent to the run_unpack input, and the function logic
provides that all data transferred to the runlist about file or
directory is deleted without creating a runs_tree structure.
Substituting the runlist in the $DATA attribute of the MFT record for an
arbitrary file can lead either to access to arbitrary data on the disk
bypassing access checks to them (since the inode access check
occurs above) or to destruction of arbitrary data on the disk.
Add overflow check for addition operation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 4342306f0f ("fs/ntfs3: Add file operations and implementation")
Signed-off-by: Vitaly Grigoryev <Vitaly.Grigoryev@kaspersky.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eebccbfea4 ]
Currently, sta_set_sinfo() fails to populate link-level station info
when sinfo->valid_links is initially 0 and sta->sta.valid_links has
bits set for links other than link 0. This typically occurs when
association happens on a non-zero link or link 0 deleted dynamically.
In such cases, the for_each_valid_link(sinfo, link_id) loop only
executes for link 0 and terminates early, since sinfo->valid_links
remains 0. As a result, only MLD-level information is reported to
userspace.
Hence to fix, initialize sinfo->valid_links with sta->sta.valid_links
before entering the loop to ensure loop executes for each valid link.
During iteration, mask out invalid links from sinfo->valid_links if
any of sta->link[link_id], sdata->link[link_id], or sinfo->links[link_id]
are not present, to report only valid link information.
Fixes: 505991fba9 ("wifi: mac80211: extend support to fill link level sinfo structure")
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250904104054.790321-1-quic_sarishar@quicinc.com
[clarify comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88ec0e01a8 ]
Change 'ret' from unsigned long to int, as storing negative error codes
in an unsigned long makes it never equal to -ETIMEDOUT, causing logical
errors.
Fixes: d7d0e73f7d ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/671100/
Link: https://lore.kernel.org/r/20250826092047.224341-1-rongqianfeng@vivo.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2fab94bcf3 ]
Blamed commit added a critical false sharing on a single
atomic_long_t under DOS, like receiving UDP packets
to closed ports.
Per netns ICMP6_MIB_RATELIMITHOST tracking uses per-cpu
storage and is enough, we do not need per-device and slow tracking.
Fixes: d0941130c9 ("icmp: Add counters for rate limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Cc: Abhishek Rawal <rawal.abhishek92@gmail.com>
Link: https://patch.msgid.link/20250905165813.1470708-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ceac1fb229 ]
Use ARRAY_SIZE(), so that we know the limit at compile time.
Following patch needs this preliminary change.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250905165813.1470708-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 2fab94bcf3 ("ipv6: snmp: do not track per idev ICMP6_MIB_RATELIMITHOST")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4336efb59e ]
When an invalid value is passed via quirk option, currently
bytcr_rt5640 driver just ignores and leaves as is, which may lead to
unepxected results like OOB access.
This patch adds the sanity check and corrects the input mapping to the
certain default value if an invalid value is passed.
Fixes: 64484ccee7 ("ASoC: Intel: bytcr_rt5651: Set card long_name based on quirks")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20250902171826.27329-4-tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fba404e4b4 ]
When an invalid value is passed via quirk option, currently
bytcr_rt5640 driver only shows an error message but leaves as is.
This may lead to unepxected results like OOB access.
This patch corrects the input mapping to the certain default value if
an invalid value is passed.
Fixes: 063422ca2a ("ASoC: Intel: bytcr_rt5640: Set card long_name based on quirks")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20250902171826.27329-3-tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b20eb0e8de ]
When an invalid value is passed via quirk option, currently
bytcht_es8316 driver just ignores and leaves as is, which may lead to
unepxected results like OOB access.
This patch adds the sanity check and corrects the input mapping to the
certain default value if an invalid value is passed.
Fixes: 249d2fc9e5 ("ASoC: Intel: bytcht_es8316: Set card long_name based on quirks")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20250902171826.27329-2-tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c20edbacc0 ]
No idea what the current barrier position was meant for. At that point,
nothing is read from the descriptor, only the pointer to the actual one
is fetched.
The correct barrier usage here is after the generation check, so that
only the first qword is read if the descriptor is not yet ready and we
need to stop polling. Debatable on coherent DMA as the Rx descriptor
size is <= cacheline size, but anyway, the current barrier position
only makes the codegen worse.
Fixes: 3a8845af66 ("idpf: add RX splitq napi poll support")
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c94fc6d356 ]
With the switch to GPUVM the msm driver no longer supports the no-IOMMU
configurations (even without the actual GPU). Return an error in case we
face the lack of the IOMMU.
Fixes: 111fdd2198 ("drm/msm: drm_gpuvm conversion")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/672559/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc64568b52 ]
With the switch to GPUVM the msm driver no longer supports the no-IOMMU
configurations (even without the actual GPU). Return an error in case we
face the lack of the IOMMU for an MDP4 device.
Fixes: 111fdd2198 ("drm/msm: drm_gpuvm conversion")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/672557/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4b34ba664 ]
The header file "fw/img.h" is already included on line 9. Remove the
redundant include.
Fixes: 2594e4d9e1 ("wifi: iwlwifi: prepare for reading SAR tables from UEFI")
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://patch.msgid.link/20250819121201.608770-2-liaoyuanhong@vivo.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a3bef68a6 ]
We need to reject the MAP op if offset+range is larger than the BO size.
Reported-by: Connor Abbott <cwabbott0@gmail.com>
Fixes: 2e6a8a1fe2 ("drm/msm: Add VM_BIND ioctl")
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/669781/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 278f890443 ]
If we fail a handle-lookup part way thru, we need to drop the already
obtained obj references.
Fixes: 2e6a8a1fe2 ("drm/msm: Add VM_BIND ioctl")
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/669784/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0531cdba5 ]
Similar to previous commit 2a934fdb01 ("media: v4l2-dev: fix error
handling in __video_register_device()"), the release hook should be set
before device_register(). Otherwise, when device_register() return error
and put_device() try to callback the release function, the below warning
may happen.
------------[ cut here ]------------
WARNING: CPU: 1 PID: 4760 at drivers/base/core.c:2567 device_release+0x1bd/0x240 drivers/base/core.c:2567
Modules linked in:
CPU: 1 UID: 0 PID: 4760 Comm: syz.4.914 Not tainted 6.17.0-rc3+ #1 NONE
RIP: 0010:device_release+0x1bd/0x240 drivers/base/core.c:2567
Call Trace:
<TASK>
kobject_cleanup+0x136/0x410 lib/kobject.c:689
kobject_release lib/kobject.c:720 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0xe9/0x130 lib/kobject.c:737
put_device+0x24/0x30 drivers/base/core.c:3797
pps_register_cdev+0x2da/0x370 drivers/pps/pps.c:402
pps_register_source+0x2f6/0x480 drivers/pps/kapi.c:108
pps_tty_open+0x190/0x310 drivers/pps/clients/pps-ldisc.c:57
tty_ldisc_open+0xa7/0x120 drivers/tty/tty_ldisc.c:432
tty_set_ldisc+0x333/0x780 drivers/tty/tty_ldisc.c:563
tiocsetd drivers/tty/tty_io.c:2429 [inline]
tty_ioctl+0x5d1/0x1700 drivers/tty/tty_io.c:2728
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:598 [inline]
__se_sys_ioctl fs/ioctl.c:584 [inline]
__x64_sys_ioctl+0x194/0x210 fs/ioctl.c:584
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x5f/0x2a0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
Before commit c79a39dc8d ("pps: Fix a use-after-free"),
pps_register_cdev() call device_create() to create pps->dev, which will
init dev->release to device_create_release(). Now the comment is outdated,
just remove it.
Thanks for the reminder from Calvin Owens, 'kfree_pps' should be removed
in pps_register_source() to avoid a double free in the failure case.
Link: https://lore.kernel.org/all/20250827065010.3208525-1-wangliang74@huawei.com/
Fixes: c79a39dc8d ("pps: Fix a use-after-free")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-By: Calvin Owens <calvin@wbinvd.org>
Link: https://lore.kernel.org/r/20250830075023.3498174-1-wangliang74@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b26053819 ]
There is a dev_err message that is reporting the value of
cmd->asiv_length when it should be reporting cmd->asv_length
instead. Fix this.
Fixes: eaf4722d46 ("GenWQE Character device and DDCB queue")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20250902113712.2624743-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3cf0b3c243 ]
Currently gsm_queue() processes incoming frames and when opening
a DLC channel it calls gsm_dlci_open() which calls gsm_modem_update().
If basic mode is used it calls gsm_modem_upd_via_msc() and it
cannot block the input queue by waiting the response to come
into the same input queue.
Instead allow sending Modem Status Command without waiting for remote
end to respond. Define a new function gsm_modem_send_initial_msc()
for this purpose. As MSC is only valid for basic encoding, it does
not do anything for advanced or when convergence layer type 2 is used.
Fixes: 4847380250 ("tty: n_gsm: fix missing update of modem controls after DLCI open")
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Link: https://lore.kernel.org/r/20250827123221.1148666-1-seppo.takalo@nordicsemi.no
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e271cc0d25 ]
Once the use_os_string flag is set to true for some functions
(e.g. adb/mtp) which need to response the OS string, and then
if we re-bind the ConfigFS gadget to use the other functions
(e.g. hid) which should not to response the OS string, however,
because the use_os_string flag is still true, so the usb gadget
response the OS string descriptor incorrectly, this can cause
the USB device to be unrecognizable on the Windows system.
An example of this as follows:
echo 1 > os_desc/use
ln -s functions/ffs.adb configs/b.1/function0
start adbd
echo "<udc device>" > UDC #succeed
stop adbd
rm configs/b.1/function0
echo 0 > os_desc/use
ln -s functions/hid.gs0 configs/b.1/function0
echo "<udc device>" > UDC #fail to connect on Windows
This patch sets the use_os_string flag to false at bind if
the functions not support OS Descriptors.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Fixes: 87213d388e ("usb: gadget: configfs: OS String support")
Link: https://lore.kernel.org/r/1755833769-25434-1-git-send-email-william.wu@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b570b346dd ]
In the twl6030_usb_probe(), the variable ret is declared as
a u32 type. However, since ret may receive -ENODEV when accepting
the return value of omap_usb2_set_comparator().Therefore, its type
should be changed to int.
Fixes: 0e98de67ba ("usb: otg: make twl6030_usb as a comparator driver to omap_usb2")
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Link: https://lore.kernel.org/r/20250822092224.30645-1-zhao.xichao@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cbda64f3f5 ]
Use negative error code -EINVAL instead of positive EINVAL in the default
case of svm_ioctl() to conform to Linux kernel error code conventions.
Fixes: 42de677f79 ("drm/amdkfd: register svm range")
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
