An earlier patch marked one of the two CPU masks as 'static' to reduce stack
usage, but if CONFIG_NR_CPUS is large enough, the function still produces
a warning for compile testing:
drivers/cpufreq/armada-8k-cpufreq.c: In function 'armada_8k_cpufreq_init':
drivers/cpufreq/armada-8k-cpufreq.c:203:1: error: the frame size of 1416 bytes is larger than 1408 bytes [-Werror=frame-larger-than=]
Normally this should be done using alloc_cpumask_var(), but since the
driver already has a static mask and the probe function is not called
concurrently, use the same trick for both.
Fixes: 1ffec650d0 ("cpufreq: armada-8k: Avoid excessive stack usage")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmhYZ9AeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGPdcIAIR01BnZbU7knvkI
QSMlJR4zl8IDIu+9P35v5jmoklJFqYtIGQUnNTxrWK0i/NGj6+FAmA8xgAzeJZ7d
Kv0Qs0fkgwQWxFbbM9Xg9Vob8gxSZ6Qyo5ETz8UDupCNWyUPpMaRDLv8IRtF/19I
YAgXJqCXC4LuJJNROSkk3wiLqg+CerzJ/m7GJtBQdCmbv6h87HETaeQpKVgEwTkR
uEn99CDnOryovIYWoDaBbqLRF5AQr2JA6lqmQAr57wyjzuj1Ul2BNgLC/dlnuSQl
G8kv0+Kf+l1X3UJy1w8V4lkSLyjpTko7QIgv3AVDLDvOobCtZglWD4vPJ1OGvw4m
cHDrPg4=
=thw2
-----END PGP SIGNATURE-----
Merge tag 'v6.16-rc3' into perf-tools-next
To get the fixes in libbpf and perf tools.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The DMA map functions can fail and should be tested for errors.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250620075602.12575-1-fourier.thomas@gmail.com
If we always align the vmemmap start to PAGE_SIZE, there is a
chance that we may end up allocating page-sized vmemmap backing
pages in RAM in the altmap not present case, because a PAGE_SIZE
aligned address is not PMD_SIZE-aligned.
In this patch, we are aligning the vmemmap start address to
PMD_SIZE if altmap is not present. This ensures that a PMD_SIZE
page is always allocated for the vmemmap mapping if altmap is
not present.
If altmap is present, Make sure we align the start vmemmap addr to
PAGE_SIZE so that we calculate the correct start_pfn in altmap
boundary check to decide whether we should use altmap or RAM based
backing memory allocation. Also the address need to be aligned for
set_pte operation. If the start addr is already PMD_SIZE aligned
and with in the altmap boundary then we will try to use a pmd size
altmap mapping else we go for page size mapping.
So if altmap is present, we try to use the maximum number of
altmap pages; otherwise, we allocate a PMD_SIZE RAM page.
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/895c4afd912c85d344a2065e348fac90529ed48f.1750593372.git.donettom@linux.ibm.com
Error conditions are not handled properly if altmap is not present
and PMD_SIZE vmemmap_alloc_block_buf fails.
In this patch, if vmemmap_alloc_block_buf fails in the non-altmap
case, we will fall back to the base mapping.
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/7f95fe91c827a2fb76367a58dbea724e811fb152.1750593372.git.donettom@linux.ibm.com
IO hotplug add event is handled in the user space with drmgr tool.
After the device is enabled, the user space uses /sys/kernel/dlpar
interface with “dt add index <drc_index>” to update the device tree.
The kernel interface (dlpar_hp_dt_add()) finds the parent node for
the specified ‘drc_index’ from ibm,drc-info property. The recent FW
provides this property from 2017 onwards. But KVM guest code in
some releases is still using the older SLOF firmware which has
ibm,drc-indexes property instead of ibm,drc-info.
If the ibm,drc-info is not available, this patch adds changes to
search ‘drc_index’ from the indexes array in ibm,drc-indexes
property to support old FW.
Fixes: 02b98ff44a ("powerpc/pseries/dlpar: Add device tree nodes for DLPAR IO add")
Reported-by: Kowshik Jois <kowsjois@linux.ibm.com>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Tested-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250531235002.239213-1-haren@linux.ibm.com
The macro kvm_trace_symbol_exit is used for providing the mappings
for the trap vectors and their names. Add mapping for H_VIRT so that
trap reason is displayed as string instead of a vector number when using
the kvm_guest_exit tracepoint.
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250516121225.276466-1-gautam@linux.ibm.com
use guard(mutex) for scope based resource management of mutex.
This would make the code simpler and easier to maintain.
More details on lock guards can be found at
https://lore.kernel.org/all/20230612093537.614161713@infradead.org/T/#u
Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250505075333.184463-6-sshegde@linux.ibm.com
use lock guards for scope based resource management of mutex.
This would make the code simpler and easier to maintain.
More details on lock guards can be found at
https://lore.kernel.org/all/20230612093537.614161713@infradead.org/T/#u
This shows the use of both guard and scoped_guard
Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250505075333.184463-5-sshegde@linux.ibm.com
use scoped_guard for scope based resource management of mutex.
This would make the code simpler and easier to maintain.
More details on lock guards can be found at
https://lore.kernel.org/all/20230612093537.614161713@infradead.org/T/#u
Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250505075333.184463-4-sshegde@linux.ibm.com
The kernel uses 3100 to indicate ISA version 3.1, not 3010, so
fix the Microwatt device tree to use 3100.
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/aB6taMDWvJwOl9xj@bruin
Commit 030bdc3fd0 ("powerpc/defconfigs: Set HZ=100 on pseries and ppc64
defconfigs") lowered CONFIG_HZ from 250 to 100, citing reduced need for a
higher tick rate due to high-resolution timers and concerns about timer
interrupt overhead and cascading effects in the timer wheel.
However, improvements have been made to the timer wheel algorithm since
then, particularly in eliminating cascading effects at the cost of minor
timekeeping inaccuracies. More details are available here
https://lwn.net/Articles/646950/. This removes the original concern about
cascading, and the reliance on high-resolution timers is not applicable
to the scheduler, which still depends on periodic ticks set by CONFIG_HZ.
With the introduction of the EEVDF scheduler, users can specify custom
slices for workloads. The default base_slice is 3ms, but with CONFIG_HZ=100
(10ms tick interval), base_slice is ineffective. Workloads like stress-ng
that do not voluntarily yield the CPU run for ~10ms before switching out.
Additionally, setting a custom slice below 3ms (e.g., 2ms) should lower
task latency, but this effect is lost due to the coarse 10ms tick.
By increasing CONFIG_HZ to 1000 (1ms tick), base_slice is properly honored,
and user-defined slices work as expected. Benchmark results support this
change:
Latency improvements in schbench with EEVDF under stress-ng-induced noise:
Scheduler CONFIG_HZ Custom Slice 99th Percentile Latency (µs)
--------------------------------------------------------------------
EEVDF 1000 No 0.30x
EEVDF 1000 2 ms 0.29x
EEVDF (default) 100 No 1.00x
Switching to HZ=1000 reduces the 99th percentile latency in schbench by
~70%. This improvement occurs because, with HZ=1000, stress-ng tasks run
for ~3ms before yielding, compared to ~10ms with HZ=100. As a result,
schbench gets CPU time sooner, reducing its latency.
Daytrader Performance:
Daytrader results show minor variation within standard deviation,
indicating no significant regression.
Workload (Users/Instances) Throughput 1000HZ vs 100HZ (Std Dev%)
--------------------------------------------------------------------------
30 u, 1 i +3.01% (1.62%)
60 u, 1 i +1.46% (2.69%)
90 u, 1 i –1.33% (3.09%)
30 u, 2 i -1.20% (1.71%)
30 u, 3 i –0.07% (1.33%)
Avg. Response Time: No Change (=)
pgbench select queries:
Metric 1000HZ vs 100HZ (Std Dev%)
------------------------------------------------------------------
Average TPS Change +2.16% (1.27%)
Average Latency Change –2.21% (1.21%)
Average TPS: Higher the better
Average Latency: Lower the better
pgbench shows both throughput and latency improvements beyond standard
deviation.
Given these results and the improvements in timer wheel implementation,
increasing CONFIG_HZ to 1000 ensures that powerpc benefits from EEVDF’s
base_slice and allows fine-tuned scheduling for latency-sensitive
workloads.
Signed-off-by: Madadi Vineeth Reddy <vineethr@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.ibm.com>
Reviewed-by: Mukesh Kumar Chaurasiya <mchauras@linux.ibm.com>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250330074734.16679-1-vineethr@linux.ibm.com
This adds all symbols required for use case like
livepatching. Distros already enable this config
and enabling this increases build time by 3%
(in a power9 128 cpu setup) and almost no size
changes for vmlinux.
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250116073419.344453-1-maddy@linux.ibm.com
Update OPP FFI callback signatures to use `c_int` from the `kernel::prelude`,
instead of accessing it via `kernel::ffi::c_int`.
Although these types are defined in a crate named `ffi`, they are re-exported
via the `kernel::prelude` and should be used from there. This aligns with the
Rust-for-Linux coding guidelines and ensures ABI correctness when interfacing
with C code.
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Abhinav Ananthu <abhinav.ogl@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Update cpufreq FFI callback signatures to use `c_int` from the `kernel::prelude`,
rather than accessing it explicitly through `kernel::ffi::c_int`.
Although these types are defined in the `ffi` crate, they are re-exported
via `kernel::prelude`. This aligns with the Rust-for-Linux coding
guidelines and ensures proper C ABI compatibility across platforms.
Signed-off-by: Abhinav Ananthu <abhinav.ogl@gmail.com>
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
[ Viresh: Fixed rustfmtcheck errors ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
On ChromiumOS devices, the `ecc_size` is set to 0 (check dmesg | grep ecc
to see `ecc: 0`): this disables ECC for ramoops region, even when
`ramoops.ecc=1` is given to kernel command line parameter.
Introduce `ecc_size` module parameter to provide a method to turn on ECC
for ramoops and set different values of ecc_size per devices.
A large `ecc_size` value can cause a kernel panic due to a constraint in
Reed-Solomon code library. The validation for this constraint should
belong to the common pstore RAM layer, not in each individual driver. So
this check is handled by a separate patch [1].
[1] https://lore.kernel.org/lkml/20250620054757.1006729-1-naoyatezuka@chromium.org
Signed-off-by: Naoya Tezuka <naoyatezuka@chromium.org>
Link: https://lore.kernel.org/r/20250620062822.1018798-1-naoyatezuka@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
drm/i915 feature pull for v6.17:
Features and functionality:
- Add support for DSC fractional link bpp on DP MST (Imre)
- Add support for simultaneous Panel Replay and Adaptive Sync (Jouni)
- Add support for PTL+ double buffered LUT registers (Chaitanya, Ville)
- Add PIPEDMC event handling in preparation for flip queue (Ville)
Refactoring and cleanups:
- Rename lots of DPLL interfaces to unify them (Suraj)
- Allocate struct intel_display dynamically (Jani)
- Abstract VLV IOSF sideband better (Jani)
- Use str_true_false() helper (Yumeng Fang)
- Refactor DSB code in preparation for flip queue (Ville)
- Use drm_modeset_lock_assert_held() instead of open coding (Luca)
- Remove unused arg from skl_scaler_get_filter_select() (Luca)
- Split out a separate display register header (Jani)
- Abstract DRAM detection better (Jani)
- Convert LPT/WPT SBI sideband to struct intel_display (Jani)
Fixes:
- Fix DSI HS command dispatch with forced pipeline flush (Gareth Yu)
- Fix BMG and LNL+ DP adaptive sync SDP programming (Ankit)
- Fix error path for xe display workqueue allocation (Haoxiang Li)
- Disable DP AUX access probe where not required (Imre)
- Fix DKL PHY access if the port is invalid (Luca)
- Fix PSR2_SU_STATUS access on ADL+ (Jouni)
- Add sanity checks for porch and sync on BXT/GLK DSI (Ville)
DRM core changes:
- Change AUX DPCD access probe address (Imre)
- Refactor EDID quirks, amd make them available to drivers (Imre)
- Add quirk for DPCD access probe (Imre)
- Add DPCD definitions for Panel Replay capabilities (Jouni)
Merges:
- Backmerges to sync with v6.15-rcs and v6.16-rc1 (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/fff9f231850ed410bd81b53de43eff0b98240d31@intel.com
Previous commit 548d770c33 ("regulator: pca9450: Add support for mode
operations") added support for setting forced PWM mode on the buck
regulators for pca9450a and pca9450bc parts. However part pca9451a also
supports this feature, thus add support for it.
Fixes: 548d770c33 ("regulator: pca9450: Add support for mode operations")
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Link: https://patch.msgid.link/20250618063339.2508893-1-primoz.fiser@norik.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We currently log parse failures for ELD data and some disconnection events
as errors without rate limiting. These log messages can be triggered very
frequently in some situations, especially ELD parsing when there is nothing
connected to a HDMI port which will generate:
hdmi-audio-codec hdmi-audio-codec.1.auto: HDMI: Unknown ELD version 0
While there's doubtless work that could be done on reducing the number of
connection notification callbacks it's possible these may be legitimately
generated by poor quality physical connections so let's use rate limiting
to mitigate the log spam for the parse errors and lower the severity for
disconnect logging to debug level.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250613-asoc-hdmi-eld-logging-v1-1-76d64154d969@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch supports to add a HID device for SDCA HIDE entity.
The codec driver could call 'hid_input_report' to report events.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250616114929.855496-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The value used to identify chip variant is not an enumeration, but raw
value used to compare registers with. The 'enum' is not used in the
code at all, so simplify and make it a raw hex value define, so
intention will be explicit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250616-asoc-wcd93xx-enum-v1-3-a20a1b538509@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The value used to identify chip variant is not an enumeration, but raw
value used to compare registers with. The 'enum' is not used in the
code at all, so simplify and make it a raw hex value define, so
intention will be explicit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250616-asoc-wcd93xx-enum-v1-2-a20a1b538509@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The value used to identify chip variant is not an enumeration, but raw
value used to compare registers with. The 'enum' is not used in the
code at all, so simplify and make it a raw hex value define, so
intention will be explicit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250616-asoc-wcd93xx-enum-v1-1-a20a1b538509@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds DMI-based quirk for the Acer Nitro ANV15-41,
allowing the internal microphone to be detected correctly on
machines with "RB" as board vendor.
Signed-off-by: Yuzuru <yuzuru_10@proton.me>
Link: https://patch.msgid.link/20250622225754.20856-1-yuzuru_10@proton.me
Signed-off-by: Mark Brown <broonie@kernel.org>
With CONFIG_SND_SOC_SM8250=y and CONFIG_SND_SOC_QCOM_OFFLOAD_UTILS=m
selected in kconfig, the build will fail due to trying to link against a
symbol only found in the module.
aarch64-linux-gnu-ld: sound/soc/qcom/sm8250.o: in function `sm8250_snd_exit':
sound/soc/qcom/sm8250.c:52:(.text+0x210): undefined reference to `qcom_snd_usb_offload_jack_remove'
Fix this by declaring the dependency that forces CONFIG_SND_SOC_SM8250=m
when CONFIG_SND_SOC_QCOM_OFFLOAD_UTILS is =m.
Reported-by: Matthew Croughan <matthew.croughan@nix.how>
Fixes: 1b8d0d87b9 ("ASoC: qcom: qdsp6: Add headphone jack for offload connection status")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20250617-snd-sm8250-dep-fix-v1-1-879af8906ec4@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
From the datasheet of the MAX17201/17205, the LSB should be "5.0μVh/RSENSE".
The current computation sets it at 0.5mAh=5.0μVh/10mOhm, which does not take
into account the value of rsense (which is in 10µV steps) which can be
different from 10mOhm.
Change the computation to fit the specs.
Fixes: 479b6d0496 ("power: supply: add support for MAX1720x standalone fuel gauge")
Signed-off-by: Thomas Antoine <t.antoine@uclouvain.be>
Link: https://lore.kernel.org/r/20250523-b4-gs101_max77759_fg-v4-1-b49904e35a34@uclouvain.be
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
In Rust 1.78.0, Clippy introduced the `ref_as_ptr` lint [1]:
> Using `as` casts may result in silently changing mutability or type.
While this doesn't eliminate unchecked `as` conversions, it makes such
conversions easier to scrutinize. It also has the slight benefit of
removing a degree of freedom on which to bikeshed. Thus apply the
changes and enable the lint -- no functional change intended.
Link: https://rust-lang.github.io/rust-clippy/master/index.html#ref_as_ptr [1]
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/all/D8PGG7NTWB6U.3SS3A5LN4XWMN@proton.me/
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250615-ptr-as-ptr-v12-6-f43b024581e8@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Before Rust 1.29.0, Clippy introduced the `cast_lossless` lint [1]:
> Rust’s `as` keyword will perform many kinds of conversions, including
> silently lossy conversions. Conversion functions such as `i32::from`
> will only perform lossless conversions. Using the conversion functions
> prevents conversions from becoming silently lossy if the input types
> ever change, and makes it clear for people reading the code that the
> conversion is lossless.
While this doesn't eliminate unchecked `as` conversions, it makes such
conversions easier to scrutinize. It also has the slight benefit of
removing a degree of freedom on which to bikeshed. Thus apply the
changes and enable the lint -- no functional change intended.
Link: https://rust-lang.github.io/rust-clippy/master/index.html#cast_lossless [1]
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/all/D8ORTXSUTKGL.1KOJAGBM8F8TN@proton.me/
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Acked-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250615-ptr-as-ptr-v12-5-f43b024581e8@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In Rust 1.63.0, Clippy introduced the `as_underscore` lint [1]:
> The conversion might include lossy conversion or a dangerous cast that
> might go undetected due to the type being inferred.
>
> The lint is allowed by default as using `_` is less wordy than always
> specifying the type.
Always specifying the type is especially helpful in function call
contexts where the inferred type may change at a distance. Specifying
the type also allows Clippy to spot more cases of `useless_conversion`.
The primary downside is the need to specify the type in trivial getters.
There are 4 such functions: 3 have become slightly less ergonomic, 1 was
revealed to be a `useless_conversion`.
While this doesn't eliminate unchecked `as` conversions, it makes such
conversions easier to scrutinize. It also has the slight benefit of
removing a degree of freedom on which to bikeshed. Thus apply the
changes and enable the lint -- no functional change intended.
Link: https://rust-lang.github.io/rust-clippy/master/index.html#as_underscore [1]
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250615-ptr-as-ptr-v12-4-f43b024581e8@gmail.com
[ Changed `isize` to `c_long`. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In Rust 1.66.0, Clippy introduced the `as_ptr_cast_mut` lint [1]:
> Since `as_ptr` takes a `&self`, the pointer won’t have write
> permissions unless interior mutability is used, making it unlikely
> that having it as a mutable pointer is correct.
There is only one affected callsite, and the change amounts to replacing
`as _` with `.cast_mut().cast()`. This doesn't change the semantics, but
is more descriptive of what's going on.
Apply this change and enable the lint -- no functional change intended.
Link: https://rust-lang.github.io/rust-clippy/master/index.html#as_ptr_cast_mut [1]
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250615-ptr-as-ptr-v12-3-f43b024581e8@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In Rust 1.72.0, Clippy introduced the `ptr_cast_constness` lint [1]:
> Though `as` casts between raw pointers are not terrible,
> `pointer::cast_mut` and `pointer::cast_const` are safer because they
> cannot accidentally cast the pointer to another type.
There are only 3 affected sites:
- `*mut T as *const U as *mut U` becomes `(*mut T).cast()`.
- `&self as *const Self as *mut Self` becomes
`core::ptr::from_ref(self).cast_mut()`.
- `*const T as *mut _` becommes `(*const T).cast_mut()`.
Apply these changes and enable the lint -- no functional change
intended.
Link: https://rust-lang.github.io/rust-clippy/master/index.html#ptr_cast_constness [1]
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250615-ptr-as-ptr-v12-2-f43b024581e8@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In Rust 1.51.0, Clippy introduced the `ptr_as_ptr` lint [1]:
> Though `as` casts between raw pointers are not terrible,
> `pointer::cast` is safer because it cannot accidentally change the
> pointer's mutability, nor cast the pointer to other types like `usize`.
There are a few classes of changes required:
- Modules generated by bindgen are marked
`#[allow(clippy::ptr_as_ptr)]`.
- Inferred casts (` as _`) are replaced with `.cast()`.
- Ascribed casts (` as *... T`) are replaced with `.cast::<T>()`.
- Multistep casts from references (` as *const _ as *const T`) are
replaced with `core::ptr::from_ref(&x).cast()` with or without `::<T>`
according to the previous rules. The `core::ptr::from_ref` call is
required because `(x as *const _).cast::<T>()` results in inference
failure.
- Native literal C strings are replaced with `c_str!().as_char_ptr()`.
- `*mut *mut T as _` is replaced with `let *mut *const T = (*mut *mut
T)`.cast();` since pointer to pointer can be confusing.
Apply these changes and enable the lint -- no functional change
intended.
Link: https://rust-lang.github.io/rust-clippy/master/index.html#ptr_as_ptr [1]
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250615-ptr-as-ptr-v12-1-f43b024581e8@gmail.com
[ Added `.cast()` for `opp`. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Prepare to add smb5 support by making variables and the file name more
generic. Also take the opportunity to remove the "_charger" suffix since
smb2 always refers to a charger.
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250619-smb2-smb5-support-v1-4-ac5dec51b6e1@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Unloading and reloading the driver (e.g. when built as a module)
currently leads to errors trying to enable wake IRQ since it's already
enabled.
Use devm to manage this for us so it correctly gets disabled when
removing the driver.
Additionally, call device_init_wakeup() so that charger attach/remove
will trigger a wakeup by default.
Fixes: 8648aeb5d7 ("power: supply: add Qualcomm PMI8998 SMB2 Charger driver")
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250619-smb2-smb5-support-v1-3-ac5dec51b6e1@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Blamed commit missed that vcc_destroy_socket() calls
clip_push() with a NULL skb.
If clip_devs is NULL, clip_push() then crashes when reading
skb->truesize.
Fixes: 93a2014afb ("atm: fix a UAF in lec_arp_clear_vccs()")
Reported-by: syzbot+1316233c4c6803382a8b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68556f59.a00a0220.137b3.004e.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Gengming Liu <l.dmxcsnsbh@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
- subsystem: convert drivers to use recent callbacks of struct i2c_algorithm
A typical after-rc1 cleanup, which I couldn't send in time for rc2
- tegra: fix YAML conversion of device tree bindings
- k1: re-add a check which got lost during upstreaming
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmhYAkYACgkQFA3kzBSg
KbZ0gQ//S4Nro0WvZS/4Ph/bbroJ+rceh+83px4PCXP/Yulb9OpRFV//EBk+rQhh
rQQoxPw72f7l6z63m2eI17KN6zrh3VZ7xOp4fddoS9L0lZorY7hehrcn/W2K7P7R
prJnuVhRod0MMmwSqY4o5keLwkaKmFP9xjkEwcaBKB6nr/k8do9e4tgG6dZdPZHr
aPDA4+K1CtPILyDNUKhzb59wh+9tuRjj5gnyOa/nPjkvTB3PIyPaYLcdVuVPoX06
1EdbFbhFPlo3fas+Kk4H+LEXOXKWZw6wiAR8QV0Nn55mHCymlnpUs2MjaXHOfpyj
f4K6/5qBBOgBdfqApZyGMLffABiLI7rvAjcZ2UhMn6qMi1PmCTGGE541YN6NUcG4
2xnpuHK3m8AocJaqr0/85uM8NWwYQzs6yXJZfsyKbTKQUGg+tSwp++3wQ9K7PgT9
c4W1oVNXflfethOmSBrcK+a6pzXYxwLy/fP0blXTZWQfYr6Z+mkYGLckupSd1nwC
rRzaUaTWqHgFaRVmldz8E+nyGAiDkXmhzwSMa1efytCHCluxK/ECll+IFA9h7lsd
l6Yyz+EX09OEfqtVsAX8mXSnA1zyzPBmX12zNBoZB8Dp6H6rptdbeZvbp6gwD62e
F2cBZn9CPPSeHhblmQdqAAX8JinhHaRkjNJYwfIjlpwx6c0Zn74=
=9DqX
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- subsystem: convert drivers to use recent callbacks of struct
i2c_algorithm A typical after-rc1 cleanup, which I couldn't send in
time for rc2
- tegra: fix YAML conversion of device tree bindings
- k1: re-add a check which got lost during upstreaming
* tag 'i2c-for-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: k1: check for transfer error
i2c: use inclusive callbacks in struct i2c_algorithm
dt-bindings: i2c: nvidia,tegra20-i2c: Specify the required properties
skb may be freed as soon as we put it on the rx queue.
Use the len variable like the code did prior to the conversion.
Fixes: f9e2511d80 ("netdevsim: migrate to dstats stats collection")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
alternatives-patched doesn't get mishandled by out-of-order modifications,
leading to it overflowing and causing page faults when patching
- Avoid an infinite loop when early code does a ranged TLB invalidation before
the broadcast TLB invalidation count of how many pages it can flush, has
been read from CPUID
- Fix a CONFIG_MODULES typo
- Disable broadcast TLB invalidation when PTI is enabled to avoid an overflow
of the bitmap tracking dynamic ASIDs which need to be flushed when the
kernel switches between the user and kernel address space
- Handle the case of a CPU going offline and thus reporting zeroes when
reading top-level events in the resctrl code
-----BEGIN PGP SIGNATURE-----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=NT0q
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Make sure the array tracking which kernel text positions need to be
alternatives-patched doesn't get mishandled by out-of-order
modifications, leading to it overflowing and causing page faults when
patching
- Avoid an infinite loop when early code does a ranged TLB invalidation
before the broadcast TLB invalidation count of how many pages it can
flush, has been read from CPUID
- Fix a CONFIG_MODULES typo
- Disable broadcast TLB invalidation when PTI is enabled to avoid an
overflow of the bitmap tracking dynamic ASIDs which need to be
flushed when the kernel switches between the user and kernel address
space
- Handle the case of a CPU going offline and thus reporting zeroes when
reading top-level events in the resctrl code
* tag 'x86_urgent_for_v6.16_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/alternatives: Fix int3 handling failure from broken text_poke array
x86/mm: Fix early boot use of INVPLGB
x86/its: Fix an ifdef typo in its_alloc()
x86/mm: Disable INVLPGB when PTI is enabled
x86,fs/resctrl: Remove inappropriate references to cacheinfo in the resctrl subsystem
When the kernel is not configured CONFIG_OF, the max14577_charger_dt_init
function returns NULL. Fix the max14577_charger_probe functionby returning
-ENODATA instead of potentially passing a NULL pointer to PTR_ERR.
This fixes the below smatch warning:
max14577_charger_probe() warn: passing zero to 'PTR_ERR'
Fixes: e30110e9c9 ("charger: max14577: Configure battery-dependent settings from DTS and sysfs")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250519061601.8755-1-hanchunchao@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
In POWER_SUPPLY_PROP_MODEL_NAME branch of max1720x_battery_get_property(),
program would return -ENODEV out of FIELD_GET error, but it's better also
considering the error code returned by regmap_read() in case it fails.
Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com>
Link: https://lore.kernel.org/r/20250513123732.3041577-1-ruc_gongyuanjun@163.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The Toradex Embedded Controller is currently only present on Toradex
SMARC iMX8MP and iMX95 SoMs. Hence add a dependency on ARCH_MXC, to
prevent asking the user about this driver when configuring a kernel
without NXP i.MX SoC family support.
Fixes: 18672fe123 ("power: reset: add Toradex Embedded Controller")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1ef0beb1e09bf914650f9f9885a33af06772540d.1746536287.git.geert+renesas@glider.be
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
In the cpcap_usb_detect() function, the power_supply_get_by_name()
function may return `NULL` instead of an error pointer.
To prevent potential null pointer dereferences, Added a null check.
Fixes: eab4e6d953 ("power: supply: cpcap-charger: get the battery inserted infomation from cpcap-battery")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://lore.kernel.org/r/20250519024741.5846-1-hanchunchao@inspur.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
