Add a better helper for check_snapshot_exists().
create_snapids() can't be changed to use this, unfortunately, because
the transaction that creates new snapshot will also be inserting other
keys (e.g. root inode) that reference that snapshot ID, and they expect
the snapshot table to already be updated.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
More stack usage improvements: instead of creating a new alloc_request
(currently on the stack), save/restore just the fields we need to reuse.
This is a bit tricky, because we're doing a normal alloc_foreground.c
allocation, which calls into ec.c to get a stripe, which then does more
normal allocations - some of the fields get reused, and used
differently.
So we have to save and restore them - but the stack usage improvements
will be well worth it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a struct for common state for satisfying an on disk allocation,
instead of passing the same long list of items to every function.
This will help with stack usage, performance, and perhaps enable some
code cleanups.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We're occasionally seeing the WARN_ON() for bump allocator usage
exceeding BTREE_TRANS_MEM_MAX; add some tracing so we can see what's
going on.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This was achieved before by zero-ing out the source buffer and then
copying the bytes into the destination buffer. This can also be done with
memcpy_and_pad which will zero out only the destination buffer if its
size is bigger than the size of the source buffer. This is already used in
the same way in journal_transaction_name().
Moreover, zero-ing the source buffer was done twice, first in
__bch2_fs_log_msg() and then in bch2_trans_log_msg(). And this method
may also require allocating some extra memory for the source buffer.
In conclusion, using memcpy_and_pad is better even tough the result is
the same because it brings uniformity with what's already used in
journal_transaction_name, it avoids code duplication and reallocating
extra memory.
Signed-off-by: Roxana Nicolescu <nicolescu.roxana@protonmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Strncpy is now deprecated.
The buffer destination is not required to be NULL-terminated, but we also
want to zero out the rest of the buffer as it is already done in other
places.
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Roxana Nicolescu <nicolescu.roxana@protonmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Let's not move poisoned extents unnecessarily, since we can't guard
against introducing more bitrot.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Now, if an extent is poisoned we can move it even if there was a
checksum error. We'll have to give it a new checksum, but the poison bit
means that userspace will still see the appropriate error when they try
to read it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Copygc needs to be able to move extents that have bitrotted. We don't
want to delete them - in the future we'll have an API for "read me the
data even if there's checksum errors", and in general we don't want to
delete anything unless the user asks us to.
That will require writing it with a new checksum, which means we can't
forget that there was a checksum error so we return the correct error to
userspace.
Rebalance also wants to skip bad extents; we can now use the poison flag
for that.
This is currently disabled by default, as we want read fua support so
that we can distinguish between transient and permanent errors from the
device. It may be enabled with the module parameter:
poison_extents_on_checksum_error
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If the extent we're reading from changes, due to be being overwritten or
moved (possibly partially) - we need to reset bch_io_failures so that we
don't accidentally mark a new extent as poisoned prematurely.
This means we have to separately track (in the retry path) the extent we
previously read from.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Check for mismatches between casefold dirents and casefold directories.
A mismatch will cause lookups to fail, as we'll be doing the lookup with
the casefolded name, which won't match the non-casefolded dirent, and
vice versa.
Reported-by: Christopher Snowhill <chris@kode54.net>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_dirent_create_snapshot(), used in fsck, neglected to create a
casefolded dirent.
Just move this into dirent_create_key().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Changing the casefold option requires extra checks/work - factor out a
helper from bch2_fileattr_set() for the xattr code to use.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Christian Marangi says:
====================
net: phy: Add support for new Aeonsemi PHYs
Add support for new Aeonsemi 10G C45 PHYs. These PHYs intergate an IPC
to setup some configuration and require special handling to sync with
the parity bit. The parity bit is a way the IPC use to follow correct
order of command sent.
Supported PHYs AS21011JB1, AS21011PB1, AS21010JB1, AS21010PB1,
AS21511JB1, AS21511PB1, AS21510JB1, AS21510PB1, AS21210JB1,
AS21210PB1 that all register with the PHY ID 0x7500 0x7500
before the firmware is loaded.
The big special thing about this PHY is that it does provide
a generic PHY ID in C45 register that change to the correct one
one the firmware is loaded.
In practice:
- MMD 0x7 ID 0x7500 0x9410 -> FW LOAD -> ID 0x7500 0x9422
To handle this, we operate on .match_phy_device where
we check the PHY ID, if the ID match the generic one,
we load the firmware and we return 0 (PHY driver doesn't
match). Then PHY core will try the next PHY driver in the list
and this time the PHY is correctly filled in and we register
for it.
To help in the matching and not modify part of the PHY device
struct, .match_phy_device is extended to provide also the
current phy_driver is trying to match for. This add the
extra benefits that some other PHY can simplify their
.match_phy_device OP.
====================
Link: https://patch.msgid.link/20250517201353.5137-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add Aeonsemi PHYs and the requirement of a firmware to correctly work.
Also document the max number of LEDs supported and what PHY ID expose
when no firmware is loaded.
Supported PHYs AS21011JB1, AS21011PB1, AS21010JB1, AS21010PB1,
AS21511JB1, AS21511PB1, AS21510JB1, AS21510PB1, AS21210JB1,
AS21210PB1 that all register with the PHY ID 0x7500 0x9410 on C45
registers before the firmware is loaded.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-7-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for Aeonsemi AS21xxx 10G C45 PHYs. These PHYs integrate
an IPC to setup some configuration and require special handling to
sync with the parity bit. The parity bit is a way the IPC use to
follow correct order of command sent.
Supported PHYs AS21011JB1, AS21011PB1, AS21010JB1, AS21010PB1,
AS21511JB1, AS21511PB1, AS21510JB1, AS21510PB1, AS21210JB1,
AS21210PB1 that all register with the PHY ID 0x7500 0x7510
before the firmware is loaded.
They all support up to 5 LEDs with various HW mode supported.
While implementing it was found some strange coincidence with using the
same logic for implementing C22 in MMD regs in Broadcom PHYs.
For reference here the AS21xxx PHY name logic:
AS21x1xxB1
^ ^^
| |J: Supports SyncE/PTP
| |P: No SyncE/PTP support
| 1: Supports 2nd Serdes
| 2: Not 2nd Serdes support
0: 10G, 5G, 2.5G
5: 5G, 2.5G
2: 2.5G
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-6-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce new API, genphy_match_phy_device(), to provide a way to check
to match a PHY driver for a PHY device based on the info stored in the
PHY device struct.
The function generalize the logic used in phy_bus_match() to check the
PHY ID whether if C45 or C22 ID should be used for matching.
This is useful for custom .match_phy_device function that wants to use
the generic logic under some condition. (example a PHY is already setup
and provide the correct PHY ID)
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-5-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simplify .match_phy_device OP by using a generic function and using the
new phy_id PHY driver info instead of hardcoding the matching PHY ID
with new variant for macsec and no_macsec PHYs.
Also make use of PHY_ID_MATCH_MODEL macro and drop PHY_ID_MASK define to
introduce phy_id and phy_id_mask again in phy_driver struct.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-4-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simplify .match_phy_device OP by using a generic function and using the
new phy_id PHY driver info instead of hardcoding the matching PHY ID.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-3-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass PHY driver pointer to .match_phy_device OP in addition to phydev.
Having access to the PHY driver struct might be useful to check the
PHY ID of the driver is being matched for in case the PHY ID scanned in
the phydev is not consistent.
A scenario for this is a PHY that change PHY ID after a firmware is
loaded, in such case, the PHY ID stored in PHY device struct is not
valid anymore and PHY will manually scan the ID in the match_phy_device
function.
Having the PHY driver info is also useful for those PHY driver that
implement multiple simple .match_phy_device OP to match specific MMD PHY
ID. With this extra info if the parsing logic is the same, the matching
function can be generalized by using the phy_id in the PHY driver
instead of hardcoding.
Rust wrapper callback is updated to align to the new match_phy_device
arguments.
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org> # for Rust
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-2-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a log should be printed as info level, not error level.
Fixes: 9bfd65980f ("net: libwx: Add sriov api for wangxun nics")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/67409DB57B87E2F0+20250519063357.21164-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the driver reset fails, it may not work properly.
Therefore, the ndo.open() operation should be rejected.
In this patch, the driver calls netif_device_detach()
before the reset and calls netif_device_attach()
after the reset succeeds. If the reset fails,
netif_device_attach() is not called. Therefore,
netdev does not present and cannot be opened.
If reset fails, only the PCI reset (via sysfs)
can be used to attempt recovery.
Fixes: 3f5a61f6d5 ("net: hibmcge: Add reset supported in this module")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250517095828.1763126-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the user dumps statistics, the hibmcge driver automatically
updates all statistics. If the driver is performing the reset operation,
the error data of 0xFFFFFFFF is updated.
Therefore, if the driver is resetting, the hbg_update_stats_by_info()
needs to return directly.
Fixes: c0bf9bf31e ("net: hibmcge: Add support for dump statistics")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250517095828.1763126-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use min() instead of min_t() to avoid the possibility of casting to the
wrong type.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250520042031.9297-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Biggers says:
====================
net: faster and simpler CRC32C computation
Update networking code that computes the CRC32C of packets to just call
crc32c() without unnecessary abstraction layers. The result is faster
and simpler code.
Patches 1-7 add skb_crc32c() and remove the overly-abstracted and
inefficient __skb_checksum().
Patches 8-10 replace skb_copy_and_hash_datagram_iter() with
skb_copy_and_crc32c_datagram_iter(), eliminating the unnecessary use of
the crypto layer. This unblocks the conversion of nvme-tcp to call
crc32c() directly instead of using the crypto layer, which patch 9 does.
v1: https://lore.kernel.org/20250511004110.145171-1-ebiggers@kernel.org
====================
Link: https://patch.msgid.link/20250519175012.36581-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that skb_copy_and_hash_datagram_iter() is no longer used, remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-11-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the crc32c() library function directly takes advantage of
architecture-specific optimizations and there also now exists a function
skb_copy_and_crc32c_datagram_iter(), it is unnecessary to go through the
crypto_ahash API. Just use those functions. This is much simpler, and
it also improves performance due to eliminating the crypto API overhead.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-10-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since skb_copy_and_hash_datagram_iter() is used only with CRC32C, the
crypto_ahash abstraction provides no value. Add
skb_copy_and_crc32c_datagram_iter() which just calls crc32c() directly.
This is faster and simpler. It also doesn't have the weird dependency
issue where skb_copy_and_hash_datagram_iter() depends on
CONFIG_CRYPTO_HASH=y without that being expressed explicitly in the
kconfig (presumably because it was too heavyweight for NET to select).
The new function is conditional on the hidden boolean symbol NET_CRC32C,
which selects CRC32. So it gets compiled only when something that
actually needs CRC32C packet checksums is enabled, it has no implicit
dependency, and it doesn't depend on the heavyweight crypto layer.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-9-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
crc32c_combine() and crc32c_shift() are no longer used (except by the
KUnit test that tests them), and their current implementation is very
slow. Remove them.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-8-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the only remaining caller of __skb_checksum() is
skb_checksum(), fold __skb_checksum() into skb_checksum(). This makes
struct skb_checksum_ops unnecessary, so remove that too and simply do
the "regular" net checksum. It also makes the wrapper functions
csum_partial_ext() and csum_block_add_ext() unnecessary, so remove those
too and just use the underlying functions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-7-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make sctp_compute_cksum() just use the new function skb_crc32c(),
instead of calling __skb_checksum() with a skb_checksum_ops struct that
does CRC32C. This is faster and simpler.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-6-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of calling __skb_checksum() with a skb_checksum_ops struct that
does CRC32C, just call the new function skb_crc32c(). This is faster
and simpler.
Acked-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-5-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of calling __skb_checksum() with a skb_checksum_ops struct that
does CRC32C, just call the new function skb_crc32c(). This is faster
and simpler.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-4-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add skb_crc32c(), which calculates the CRC32C of a sk_buff. It will
replace __skb_checksum(), which unnecessarily supports arbitrary
checksums. Compared to __skb_checksum(), skb_crc32c():
- Uses the correct type for CRC32C values (u32, not __wsum).
- Does not require the caller to provide a skb_checksum_ops struct.
- Is faster because it does not use indirect calls and does not use
the very slow crc32c_combine().
According to commit 2817a336d4 ("net: skb_checksum: allow custom
update/combine for walking skb") which added __skb_checksum(), the
original motivation for the abstraction layer was to avoid code
duplication for CRC32C and other checksums in the future. However:
- No additional checksums showed up after CRC32C. __skb_checksum()
is only used with the "regular" net checksum and CRC32C.
- Indirect calls are expensive. Commit 2544af0344 ("net: avoid
indirect calls in L4 checksum calculation") worked around this
using the INDIRECT_CALL_1 macro. But that only avoided the indirect
call for the net checksum, and at the cost of an extra branch.
- The checksums use different types (__wsum and u32), causing casts
to be needed.
- It made the checksums of fragments be combined (rather than
chained) for both checksums, despite this being highly
counterproductive for CRC32C due to how slow crc32c_combine() is.
This can clearly be seen in commit 4c2f245496 ("sctp: linearize
early if it's not GSO") which tried to work around this performance
bug. With a dedicated function for each checksum, we can instead
just use the proper strategy for each checksum.
As shown by the following tables, the new function skb_crc32c() is
faster than __skb_checksum(), with the improvement varying greatly from
5% to 2500% depending on the case. The largest improvements come from
fragmented packets, mainly due to eliminating the inefficient
crc32c_combine(). But linear packets are improved too, especially
shorter ones, mainly due to eliminating indirect calls. These
benchmarks were done on AMD Zen 5. On that CPU, Linux uses IBRS instead
of retpoline; an even greater improvement might be seen with retpoline:
Linear sk_buffs
Length in bytes __skb_checksum cycles skb_crc32c cycles
=============== ===================== =================
64 43 18
256 94 77
1420 204 161
16384 1735 1642
Nonlinear sk_buffs (even split between head and one fragment)
Length in bytes __skb_checksum cycles skb_crc32c cycles
=============== ===================== =================
64 579 22
256 829 77
1420 1506 194
16384 4365 1682
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-3-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a hidden kconfig symbol NET_CRC32C that will group together the
functions that calculate CRC32C checksums of packets, so that these
don't have to be built into NET-enabled kernels that don't need them.
Make skb_crc32c_csum_help() (which is called only when IP_SCTP is
enabled) conditional on this symbol, and make IP_SCTP select it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-2-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
