During our test, it is found that a warning can be trigger in try_grab_folio
as follow:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1678 at mm/gup.c:147 try_grab_folio+0x106/0x130
Modules linked in:
CPU: 0 UID: 0 PID: 1678 Comm: syz.3.31 Not tainted 6.15.0-rc5 #163 PREEMPT(undef)
RIP: 0010:try_grab_folio+0x106/0x130
Call Trace:
<TASK>
follow_huge_pmd+0x240/0x8e0
follow_pmd_mask.constprop.0.isra.0+0x40b/0x5c0
follow_pud_mask.constprop.0.isra.0+0x14a/0x170
follow_page_mask+0x1c2/0x1f0
__get_user_pages+0x176/0x950
__gup_longterm_locked+0x15b/0x1060
? gup_fast+0x120/0x1f0
gup_fast_fallback+0x17e/0x230
get_user_pages_fast+0x5f/0x80
vmci_host_unlocked_ioctl+0x21c/0xf80
RIP: 0033:0x54d2cd
---[ end trace 0000000000000000 ]---
Digging into the source, context->notify_page may init by get_user_pages_fast
and can be seen in vmci_ctx_unset_notify which will try to put_page. However
get_user_pages_fast is not finished here and lead to following
try_grab_folio warning. The race condition is shown as follow:
cpu0 cpu1
vmci_host_do_set_notify
vmci_host_setup_notify
get_user_pages_fast(uva, 1, FOLL_WRITE, &context->notify_page);
lockless_pages_from_mm
gup_pgd_range
gup_huge_pmd // update &context->notify_page
vmci_host_do_set_notify
vmci_ctx_unset_notify
notify_page = context->notify_page;
if (notify_page)
put_page(notify_page); // page is freed
__gup_longterm_locked
__get_user_pages
follow_trans_huge_pmd
try_grab_folio // warn here
To slove this, use local variable page to make notify_page can be seen
after finish get_user_pages_fast.
Fixes: a1d88436d5 ("VMCI: Fix two UVA mapping bugs")
Cc: stable <stable@kernel.org>
Closes: https://lore.kernel.org/all/e91da589-ad57-3969-d979-879bbd10dddd@huawei.com/
Signed-off-by: Wupeng Ma <mawupeng1@huawei.com>
Link: https://lore.kernel.org/r/20250510033040.901582-1-mawupeng1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit f88c0c72ff ("mei: vsc: Use struct vsc_tp_packet as vsc-tp tx_buf
and rx_buf type") changed the type of tx_buf from "void *" to "struct
vsc_tp_packet *" and added a cast to (u32 *) when passing it to
cpu_to_be32_array() and the same change was made for rx_buf.
This triggers the type-check warning in sparse:
vsc-tp.c:327:28: sparse: expected restricted __be32 [usertype] *dst
vsc-tp.c:327:28: sparse: got unsigned int [usertype] *
vsc-tp.c:343:42: sparse: expected restricted __be32 const [usertype] *src
vsc-tp.c:343:42: sparse: got unsigned int [usertype] *
Fix this by casting to (__be32 *) instead.
Note actually changing the type of the buffers to "be32 *" is not an option
this buffer does actually contain a "struct vsc_tp_packet" and is used
as such most of the time. vsc_tp_rom_xfer() re-uses the buffers as just
dumb arrays of 32 bit words to talk to the device before the firmware has
booted, to avoid needing to allocate a separate buffer.
Fixes: f88c0c72ff ("mei: vsc: Use struct vsc_tp_packet as vsc-tp tx_buf and rx_buf type")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505071634.kZ0I7Va6-lkp@intel.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250507090728.115910-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The tlckl driver does not create a platform device anymore. It was
recently changed to use a faux device instead. Therefore the sysfs path
has changed from /sys/devices/platform/telco_clock to
/sys/devices/faux/telco_clock.
Fixes: 72239a78f9 ("tlclk: convert to use faux_device")
Signed-off-by: Roxana Nicolescu <nicolescu.roxana@protonmail.com>
Link: https://lore.kernel.org/r/20250501200457.18506-1-nicolescu.roxana@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In mt76_connac_mcu_sta_basic_tlv() link_conf is always not NULL.
Revert the commit '9890624c1b ("wifi: mt76: Check link_conf pointer in
mt76_connac_mcu_sta_basic_tlv()")' in order to fix the following
warning:
drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c:394 mt76_connac_mcu_sta_basic_tlv()
warn: variable dereferenced before check 'link_conf'
This reverts commit 9890624c1b.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250325-mt76_connac_mcu_sta_basic_tlv-link_conf-revert-v1-1-b84efefb74ee@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
In mt7996_stop_phy() the mt7996_phy structure is
dereferenced before the null sanity check which could
lead to a null deref.
Fix by moving the dereference operation after the
sanity check.
Fixes: 69d54ce749 ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Link: https://patch.msgid.link/20250421111344.11484-1-qasdev00@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The function mt7996_set_monitor() dereferences phy before
the NULL sanity check.
Fix this to avoid NULL pointer dereference by moving the
dereference after the check.
Fixes: 69d54ce749 ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Link: https://patch.msgid.link/20250421112544.13430-1-qasdev00@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
ensure proper interrupt handling and aligns with the hardware spec by
updating the register offset for MT_WFDMA0_HOST_INT_ENA.
Cc: stable@vger.kernel.org
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Michael Lo <michael.lo@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250509083512.455095-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add thermal protection to prevent the chip from possible overheating
due to prolonged high traffic and adverse operating conditions.
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20250509082117.453819-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Adds support for:
- LiteOn WN4516R
- LiteOn WN4519R
Both use:
- A nonstandard USB connector
- Mediatek chipset MT7600U
- ASIC revision: 76320044
Disabled VHT support on ASIC revision 76320044:
This fixes the 5G connectibity issue on LiteOn WN4519R module
see https://github.com/openwrt/mt76/issues/971
And may also fix the 5G issues on the XBox One Wireless Adapter
see https://github.com/openwrt/mt76/issues/200
I have looked at the FCC info related to the MT7632U chip as mentioned in here:
https://github.com/openwrt/mt76/issues/459
These confirm the chipset does not support 'ac' mode and hence VHT should be turned of.
Signed-off-by: Henk Vergonet <henk.vergonet@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250418143914.31384-1-henk.vergonet@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
If link_conf_dereference_protected() or mt7996_vif_link()
or link_sta_dereference_protected() fail the code jumps to
the error_unlink label and returns ret which is uninitialised.
Fix this by setting err before jumping to error_unlink.
Fixes: c7e4fc3624 ("wifi: mt76: mt7996: Update mt7996_mcu_add_sta to MLO support")
Fixes: dd82a9e02c ("wifi: mt76: mt7996: Rely on mt7996_sta_link in sta_add/sta_remove callbacks")
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Link: https://patch.msgid.link/20250421110550.9839-1-qasdev00@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This reverts commit 3b522caded.
The MTK connac3 has introduced new hardware, SDO (Software Defined
Offload), to offload the process of filling the TX descriptor. Initially,
there were some issues, but after several fixes, it should now be stable,
allowing us to revert this commit.
Additionally, activating SDO is essential for the proper functioning of
features like TX checksum offload.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250328022847.1612082-1-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in mt7996_thermal_init() is not checked.
Add NULL check in mt7996_thermal_init(), to handle kernel NULL
pointer dereference error.
Fixes: 69d54ce749 ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Link: https://patch.msgid.link/20250407095551.32127-1-hanchunchao@inspur.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The definition of MT_RX_SEL (for rdd_rx_sel) is mixed with the
definition of HWRDD idx.
For example, MT_RX_SEL2 is for background HWRDD idx, not an
option of rdd_rx_sel.
Additionally, HWRDD idx does not exactly map to band idx for
Connac 3 chips. So, add mt7996_get_rdd_idx as a helper function.
Finally, remove some parts of the code inherited from the legacy chips.
For instance,
1. rdd_state is used for single-band-dual-HWRDD chips (for 80+80),
especially the 76xx series.
2. rdd_rx_sel is also used for single-band-dual-HWRDD chips
rx_sel = 0 => RDD0 for WF0, RDD1 for WF2
rx_sel = 1 => RDD0 for WF1, RDD1 for WF3
Chip Variants | 5G rdd idx | Background rdd idx
---------------------------|----------------|-------------------
MT7996 (except 205/255) | 1 | 2
MT7992 | 1 | 2
MT7990 | 1 | 2
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Reviewed-by: Shayne Chen <shayne.chen@mediatek.com>
Reviewed-by: Money Wang <money.wang@mediatek.com>
Link: https://patch.msgid.link/20250320015926.3948672-1-StanleyYP.Wang@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The definition of MT_RX_SEL (for rdd_rx_sel) is mixed with the
definition of HWRDD idx.
For example, MT_RX_SEL2 is for background HWRDD idx, not an option
of rdd_rx_sel.
Therefore, add mt7915_get_rdd_idx as a helper function to get the
HWRDD idx for each variants.
Additionally, remove some parts of the code inherited from the legacy
chips.
For instance,
1. rdd_state is used for single-band-dual-HWRDD chips (for 80+80),
especially the 76xx series.
2. rdd_rx_sel is also used for single-band-dual-HWRDD chips
rx_sel = 0 => RDD0 for WF0, RDD1 for WF2
rx_sel = 1 => RDD0 for WF1, RDD1 for WF3
Chip Variants | 5G rdd idx(=bandidx)| Background rdd idx
-------------------------------|---------------------|-------------------
MT7915A | 0 | 2
MT7915D | 1 | 2
MT7916 2G + 5G (2T2R+1R) | 1 | 2
MT7916 2G + 5G (3T3R) | 1 | N/A
MT7981 2G + 5G | 1 | N/A
MT7986 2G + 5G (one adie DBDC) | 1 | N/A
MT7986 5G (one adie) | 1 (bandidx=MT_BAND1)| N/A
MT7986 2G + 5G (dual adie) | 1 | N/A
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Reviewed-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250320015918.3948643-1-StanleyYP.Wang@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Some of the variants do not support background radar, so add a
helper to report background radar capability.
For mt7916, only the variant of 5G 2T2R + 1R supports background
radar.
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Reviewed-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250320015909.3948612-1-StanleyYP.Wang@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The MT7990 comes in 2T2R and 3T3R variants, with only the 2T2R supporting
background radar.
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250409140750.724437-10-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Adjust the TX descriptor and TX free for updated hardware fields.
This is a preliminary patch to support mt7990 chipset.
Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Co-developed-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Signed-off-by: Benjamin Lin <benjamin-jw.lin@mediatek.com>
Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250409140750.724437-9-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This is a preliminary patch to support mt7990 chipset.
Co-developed-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Link: https://patch.msgid.link/20250409140750.724437-8-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add eeprom definition and default bin file for mt7990.
This is a preliminary patch to support mt7990 chipset.
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250409140750.724437-7-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rework register offset and l1/l2/cbtop mapping for mt7990.
This is a preliminary patch to support mt7990 chipset.
Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Link: https://patch.msgid.link/20250409140750.724437-6-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Modify DMA ring setting for mt7990.
This is a preliminary patch to support mt7990 chipset.
Co-developed-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250409140750.724437-5-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Since mt7990 lacks WA firmware, some WA commands are not supported or
need to be refactored to use the SDO command.
This is a preliminary patch to support mt7990 chipset.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250409140750.724437-4-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add firmware download support. Note that mt7990 does not have WA and DSP
firmwares. This is a preliminary patch to support mt7990 chipset.
Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250409140750.724437-3-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The chipset name (i.e., brand name) used by the driver may cause confusion
with the PCI device ID when adding support for new chipsets.
| Chipset name | PCI device id |
|--------------|----------------|
| 7996 | 0x7990, 0x7991 |
| 7992 | 0x7992, 0x799a |
| 7990 | 0x7993, 0x799b |
To prevent confusion, replace the code that directly uses the device ID
with macros. This is a preliminary patch to support mt7990 chipset.
Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20250409140750.724437-2-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
- This document provides AMD side band IOCTL description defined
for APML and its usage.
Multiple AMD custom protocols defined for side band system
management uses this IOCTL.
User space C-APIs are made available by esmi_oob_library [1],
which is provided by the E-SMS project [2].
Link: https://github.com/amd/esmi_oob_library [1]
Link: https://www.amd.com/en/developer/e-sms.html [2]
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-11-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Provide user register access over IOCTL.
Both register read and write are supported.
- APML interface does not provide a synchronization method. By defining,
a register access path, we use APML modules and library for
all APML transactions. Without having to use external tools such as
i2c-tools, which may cause race conditions.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-10-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- AMD provides custom protocol to read Machine Check Architecture(MCA)
registers over sideband. The information is accessed for range of
MCA registers by passing register address and thread ID to the protocol.
MCA register read command using the register address to access
Core::X86::Msr::MCG_CAP which determines the number of MCA banks.
Access is read-only
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-9-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- AMD provides custom protocol to read Processor feature
capabilities and configuration information through side band.
The information is accessed by providing CPUID Function,
extended function and thread ID to the protocol.
Undefined function returns 0.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-8-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The present sbrmi module only support reporting power via hwmon.
However, AMD data center range of processors support various
system management functionality using custom protocols defined in
Advanced Platform Management Link (APML) specification.
Register a miscdevice, which creates a device /dev/sbrmiX with an IOCTL
interface for the user space to invoke the APML Mailbox protocol, which
is already defined in sbrmi_mailbox_xfer().
The APML protocols depend on a set of RMI registers. Having an IOCTL
as a single entry point will help in providing synchronization among
these protocols as multiple transactions on RMI register set may
create race condition.
Support for other protocols will be added in subsequent patches.
APML mailbox protocol returns additional error codes written by
SMU firmware in the out-bound register 0x37. These errors include,
invalid core, message not supported over platform and
others. This additional error codes can be used to provide more
details to user space.
Open-sourced and widely used https://github.com/amd/esmi_oob_library
will continue to provide user-space programmable API.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-7-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- optimize the wait condition to indicate command completion
by replacing the do while loop with regmap subsystem API
regmap_read_poll_timeout()
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-6-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- regmap subsystem provides multiple benefits over direct smbus APIs
- subsystem adds another abstraction layer on top of struct i2c_client to
make it easy to read or write registers.
- The subsystem can be helpful in following cases
- Different types of bus (i2c/i3c), we have plans to support i3c.
- Different Register address size (1byte/2byte)
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-5-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Move hwmon device sensor to misc as only power is reported through
hwmon sensor.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-4-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- This is done to utilize the protocol functionality into
other domains.
- Increase the scalability of the module with different bus(i2c/i3c)
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-3-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is done to support other functionality provided by the SBRMI, which
does not fit in the hwmon subsystem.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20250428063034.2145566-2-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The patch adds PIO asynchronous wakeup support while PIO PCIe Endpoint
function is in D3 state. When such a wakeup event occurs, the PIO
asserts a PIO_WAKE signal, which in turn triggers PCIe Wake signaling.
This wake request should trigger the PCIe Host to take the PIO PCIe
Endpoint function into the D0 device state.
The device supports up to 96 PIOs distributed across three GPIO banks.
During suspend and resume, the driver checks the status of each GPIO bank
to determine if any GPIOs with wake masking enabled have triggered an
event. Upon resume, PIOxx_STATUS register must be cleared by software
explicitly to enable the detection of the next transition.
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20250513091557.3660-3-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Systems that issue PCIe hot reset requests during a suspend/resume
cycle cause PCI1XXXX device revisions prior to C0 to get its GPIO
configuration registers reset to hardware default values. This results
in device inaccessibility and GPIO read/write failure. Starting with
Revision C0, support was added in the device hardware (via the Hot
Reset Disable Bit) to allow resetting only the PCIe interface and its
associated logic, but preserving the GPIO configurations during a hot
reset. This patch enables the hot reset disable feature during suspend/
resume for C0 and later revisions of the device.
mchp_pci1xxxx_gpio is an auxiliary child of mchp_pci1xxxx_gp and does
not have access to system register address space for reading the device
revision. Hence, the device revision is retrieved directly from PCIe
config space.
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20250513091557.3660-2-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The lis3lv02d driver does not create a platform device anymore. It was
recently changed to use a faux device instead. Therefore the sysfs path
has changed from /sys/devices/platform/lis3lv02d to
/sys/devices/faux/lis3lv02d.
Fixes: 3b18ccb547 ("misc: lis3lv02d: convert to use faux_device")
Signed-off-by: Roxana Nicolescu <nicolescu.roxana@protonmail.com>
Link: https://lore.kernel.org/r/20250506110002.36477-1-nicolescu.roxana@protonmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Binder defines several seq_files that can be accessed via debugfs or
binderfs. Some of these files (e.g., 'state' and 'transactions')
contain more granular information about binder's internal state that
is helpful for debugging, but they also leak userspace address data
through user-defined 'cookie' or 'ptr' values. Consequently, access
to these files must be heavily restricted.
Add two new files, 'state_hashed' and 'transactions_hashed', that
reproduce the information in the original files but use the kernel's
raw pointer obfuscation to hash any potential user addresses. This
approach allows systems to grant broader access to the new files
without having to change the security policy around the existing ones.
In practice, userspace populates these fields with user addresses, but
within the driver, these values only serve as unique identifiers for
their associated binder objects. Consequently, binder logs can
obfuscate these values and still retain meaning. While this strategy
prevents leaking information about the userspace memory layout in the
existing log files, it also decouples log messages about binder
objects from their user-defined identifiers.
Acked-by: Carlos Llamas <cmllamas@google.com>
Tested-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: "Tiffany Y. Yang" <ynaffit@google.com>
Link: https://lore.kernel.org/r/20250510013435.1520671-7-ynaffit@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The binder driver outputs information about each dead binder node by
iterating over the dead nodes list, and it prints the state of each live
node in the system by traversing each binder_proc's proc->nodes tree.
Both cases require similar logic to maintain the global lock ordering
while accessing each node.
Create a helper function to synchronize around printing binder nodes in
a list. Opportunistically make minor cosmetic changes to binder print
functions.
Acked-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: "Tiffany Y. Yang" <ynaffit@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250510013435.1520671-5-ynaffit@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells <dhowells@redhat.com> says:
Here are some miscellaneous fixes and changes for netfslib, if you could
pull them:
(1) Fix an oops in write-retry due to mis-resetting the I/O iterator.
(2) Fix the recording of transferred bytes for short DIO reads.
(3) Fix a request's work item to not require a reference, thereby avoiding
the need to get rid of it in BH/IRQ context.
(4) Fix waiting and waking to be consistent about the waitqueue used.
* patches from https://lore.kernel.org/20250519090707.2848510-1-dhowells@redhat.com:
netfs: Fix wait/wake to be consistent about the waitqueue used
netfs: Fix the request's work item to not require a ref
netfs: Fix setting of transferred bytes with short DIO reads
netfs: Fix oops in write-retry from mis-resetting the subreq iterator
Link: https://lore.kernel.org/20250519090707.2848510-1-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
