-----BEGIN PGP SIGNATURE-----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=8wrr
-----END PGP SIGNATURE-----
Merge tag 'vmscape-for-linus-20250904' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vmescape mitigation fixes from Dave Hansen:
"Mitigate vmscape issue with indirect branch predictor flushes.
vmscape is a vulnerability that essentially takes Spectre-v2 and
attacks host userspace from a guest. It particularly affects
hypervisors like QEMU.
Even if a hypervisor may not have any sensitive data like disk
encryption keys, guest-userspace may be able to attack the
guest-kernel using the hypervisor as a confused deputy.
There are many ways to mitigate vmscape using the existing Spectre-v2
defenses like IBRS variants or the IBPB flushes. This series focuses
solely on IBPB because it works universally across vendors and all
vulnerable processors. Further work doing vendor and model-specific
optimizations can build on top of this if needed / wanted.
Do the normal issue mitigation dance:
- Add the CPU bug boilerplate
- Add a list of vulnerable CPUs
- Use IBPB to flush the branch predictors after running guests"
* tag 'vmscape-for-linus-20250904' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vmscape: Add old Intel CPUs to affected list
x86/vmscape: Warn when STIBP is disabled with SMT
x86/bugs: Move cpu_bugs_smt_update() down
x86/vmscape: Enable the mitigation
x86/vmscape: Add conditional IBPB mitigation
x86/vmscape: Enumerate VMSCAPE bug
Documentation/hw-vuln: Add VMSCAPE documentation
The TMU has two temperature measurement sites located on the chip. The
probe 0 is located inside of the ANAMIX, while the probe 1 is located near
the ARM core. This has been confirmed by checking with HW design team and
checking RTL code.
So correct the {cpu,soc}-thermal sensor index.
Fixes: 30cdd62dce ("arm64: dts: imx8mp: Add thermal zones support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=zNV6
-----END PGP SIGNATURE-----
Merge tag 'nf-25-09-10-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westpha says:
====================
netfilter pull request nf-25-09-10
First patch adds a lockdep annotation for a false-positive splat.
Last patch adds formal reviewer tag for Phil Sutter to MAINTAINERS.
Rest of the patches resolve spurious false negative results during set
lookups while another CPU is processing a transaction.
This has been broken at least since v4.18 when an unconditional
synchronize_rcu call was removed from the commit phase of nf_tables.
Quoting from Stefan Hanreichs original report:
It seems like we've found an issue with atomicity when reloading
nftables rulesets. Sometimes there is a small window where rules
containing sets do not seem to apply to incoming traffic, due to the set
apparently being empty for a short amount of time when flushing / adding
elements.
Exanple ruleset:
table ip filter {
set match {
type ipv4_addr
flags interval
elements = { 0.0.0.0-192.168.2.19, 192.168.2.21-255.255.255.255 }
}
chain pre {
type filter hook prerouting priority filter; policy accept;
ip saddr @match accept
counter comment "must never match"
}
}
Reproducer transaction:
while true:
nft -f -<<EOF
flush set ip filter match
create element ip filter match { \
0.0.0.0-192.168.2.19, 192.168.2.21-255.255.255.255 }
EOF
done
Then create traffic. to/from e.g. 192.168.2.1 to 192.168.3.10.
Once in a while the counter will increment even though the
'ip saddr @match' rule should have accepted the packet.
See individual patches for details.
Thanks to Stefan Hanreich for an initial description and reproducer for
this bug and to Pablo Neira Ayuso for reviewing earlier iterations of
the patchset.
* tag 'nf-25-09-10-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
MAINTAINERS: add Phil as netfilter reviewer
netfilter: nf_tables: restart set lookup on base_seq change
netfilter: nf_tables: make nft_set_do_lookup available unconditionally
netfilter: nf_tables: place base_seq in struct net
netfilter: nft_set_rbtree: continue traversal if element is inactive
netfilter: nft_set_pipapo: don't check genbit from packetpath lookups
netfilter: nft_set_bitmap: fix lockdep splat due to missing annotation
====================
Link: https://patch.msgid.link/20250910190308.13356-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmjBpO8THG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnJOOB/9r35uZBD1+ZZVpvoByhil8XY7K42Vv
LrARJ8+kh1Q6mcuB4V/176GBPJ7JabSUTGqvqvYbJBAB5obONhLU5Bkb/7lM2z1G
MOUe0DMiBP+J3K8zqXcEKhqeW0qQO6pqfnv8iIj97Kxwd5JRPJq8pMpCIC/RLzOY
Ot7+fcsE+cSZt9VumnQTx/S1fzGoY1C9VCglSr9B0O6IiTZZBIPNg8EwIGvbm7oh
uofnFRocRZaWQ6OErdRSTLK4hu11DeFUmEAA6YN2ikpAdshUsf3U8HYaz2LIEEuu
zGflFXrMekXqDod1SvhklLPUY/ssC11dUon+4Cgz/yK6I+lFvD/cuLIP
=/YxL
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.17-20250910' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-09-10
The 1st patch is by Alex Tran and fixes the Documentation of the
struct bcm_msg_head.
Davide Caratti's patch enabled the VCAN driver as a module for the
Linux self tests.
Tetsuo Handa contributes 3 patches that fix various problems in the
CAN j1939 protocol.
Anssi Hannula's patch fixes a potential use-after-free in the
xilinx_can driver.
Geert Uytterhoeven's patch fixes the rcan_can's suspend to RAM on
R-Car Gen3 using PSCI.
* tag 'linux-can-fixes-for-6.17-20250910' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: rcar_can: rcar_can_resume(): fix s2ram with PSCI
can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKB
can: j1939: j1939_local_ecu_get(): undo increment when j1939_local_ecu_get() fails
can: j1939: j1939_sk_bind(): call j1939_priv_put() immediately when j1939_local_ecu_get() failed
can: j1939: implement NETDEV_UNREGISTER notification handler
selftests: can: enable CONFIG_CAN_VCAN as a module
docs: networking: can: change bcm_msg_head frames member to support flexible array
====================
Link: https://patch.msgid.link/20250910162907.948454-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-09-09 (igb, i40e)
For igb:
Tianyu Xu removes passing of, no longer needed, NAPI id to avoid NULL
pointer dereference on ethtool loopback testing.
Kohei Enju corrects reporting/testing of link state when interface is
down.
For i40e:
Michal Schmidt corrects value being passed to free_irq().
Jake sets hardware maximum frame size on probe to ensure
expected/consistent state.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: fix Jumbo Frame support after iPXE boot
i40e: fix IRQ freeing in i40e_vsi_request_irq_msix error path
igb: fix link test skipping when interface is admin down
igb: Fix NULL pointer dereference in ethtool loopback test
====================
Link: https://patch.msgid.link/20250909203236.3603960-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 3f490a74a8a1 ("clocksource/drivers/vf-pit: Rename the VF PIT to NXP
PIT") renames the config VF_PIT_TIMER to NXP_PIT_TIMER, but it misses
adjusting a reference to VF_PIT_TIMER in arch/arm/mach-imx/Kconfig.
Adjust the config reference to the new name.
Fixes: 3f490a74a8a1 ("clocksource/drivers/vf-pit: Rename the VF PIT to NXP PIT")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To ensure successful builds when CONFIG_IMX_SCMI_CPU_DRV is not enabled,
this patch adds static inline stub implementations for the following
functions:
- scmi_imx_cpu_start()
- scmi_imx_cpu_started()
- scmi_imx_cpu_reset_vector_set()
These stubs return -EOPNOTSUPP to indicate that the functionality is not
supported in the current configuration. This avoids potential build or
link errors in code that conditionally calls these functions based on
feature availability.
Fixes: 1055faa5d6 ("firmware: imx: Add i.MX95 SCMI CPU driver")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To ensure successful builds when CONFIG_IMX_SCMI_LMM_DRV is not enabled,
this patch adds static inline stub implementations for the following
functions:
- scmi_imx_lmm_operation()
- scmi_imx_lmm_info()
- scmi_imx_lmm_reset_vector_set()
These stubs return -EOPNOTSUPP to indicate that the functionality is not
supported in the current configuration. This avoids potential build or
link errors in code that conditionally calls these functions based on
feature availability.
Fixes: 7242bbf418 ("firmware: imx: Add i.MX95 SCMI LMM driver")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To ensure successful builds when CONFIG_IMX_SCMI_MISC_DRV is not enabled,
this patch adds static inline stub implementations for the following
functions:
- scmi_imx_misc_ctrl_get()
- scmi_imx_misc_ctrl_set()
These stubs return -EOPNOTSUPP to indicate that the functionality is not
supported in the current configuration. This avoids potential build or
link errors in code that conditionally calls these functions based on
feature availability.
This patch also drops the changes in commit 540c830212 ("firmware: imx:
remove duplicate scmi_imx_misc_ctrl_get()").
The original change aimed to simplify the handling of optional features by
removing conditional stubs. However, the use of conditional stubs is
necessary when CONFIG_IMX_SCMI_MISC_DRV is n, while consumer driver is
set to y.
This is not a matter of preserving legacy patterns, but rather to ensure
that there is no link error whether for module or built-in.
Fixes: 0b4f8a68b2 ("firmware: imx: Add i.MX95 MISC driver")
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Drop phylink_{suspend,resume}() from ax88772 PM callbacks.
MDIO bus accesses have their own runtime-PM handling and will try to
wake the device if it is suspended. Such wake attempts must not happen
from PM callbacks while the device PM lock is held. Since phylink
{sus|re}sume may trigger MDIO, it must not be called in PM context.
No extra phylink PM handling is required for this driver:
- .ndo_open/.ndo_stop control the phylink start/stop lifecycle.
- ethtool/phylib entry points run in process context, not PM.
- phylink MAC ops program the MAC on link changes after resume.
Fixes: e0bffe3e68 ("net: asix: ax88772: migrate to phylink")
Reported-by: Hubert Wiśniewski <hubert.wisniewski.25632@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Tested-by: Hubert Wiśniewski <hubert.wisniewski.25632@gmail.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20250908112619.2900723-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In C, enumerated types do not have a defined size, apart from being
compatible with one of the standard types. This allows an ABI /
compiler to choose the type of an enum depending on the values it
needs to store, and storing larger values in it can lead to undefined
behaviour.
The tx_type and rx_filters members of struct kernel_ethtool_ts_info
are defined as enumerated types, but are bit arrays, where each bit
is defined by the enumerated type. This means they typically store
values in excess of the maximum value of the enumerated type, in
fact (1 << max_value) and thus must not be declared using the
enumated type.
Fix both of these to use u32, as per the corresponding __u32 UAPI type.
Fixes: 2111375b85 ("net: Add struct kernel_ethtool_ts_info")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/E1uvMEK-00000003Amd-2pWR@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable patches:
- Revert "SUNRPC: Don't allow waiting for exiting tasks" as it is
breaking ltp tests.
Bugfixes:
- Another set of fixes to the tracking of NFSv4 server capabilities
when crossing filesystem boundaries.
- Localio fix to restore credentials and prevent triggering a BUG_ON().
- Fix to prevent flapping of the localio on/off trigger.
- Protections against 'eof page pollution' as demonstrated in xfstests
generic/363.
- Series of patches to ensure correct ordering of O_DIRECT i/o and
truncate, fallocate and copy functions.
- Fix a NULL pointer check in flexfiles reads that regresses 6.17.
- Correct a typo that breaks flexfiles layout segment processing.
-----BEGIN PGP SIGNATURE-----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=5TC7
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.17-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client fixes from Trond Myklebust:
"Stable patches:
- Revert "SUNRPC: Don't allow waiting for exiting tasks" as it is
breaking ltp tests
Bugfixes:
- Another set of fixes to the tracking of NFSv4 server capabilities
when crossing filesystem boundaries
- Localio fix to restore credentials and prevent triggering a
BUG_ON()
- Fix to prevent flapping of the localio on/off trigger
- Protections against 'eof page pollution' as demonstrated in
xfstests generic/363
- Series of patches to ensure correct ordering of O_DIRECT i/o and
truncate, fallocate and copy functions
- Fix a NULL pointer check in flexfiles reads that regresses 6.17
- Correct a typo that breaks flexfiles layout segment processing"
* tag 'nfs-for-6.17-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4/flexfiles: Fix layout merge mirror check.
SUNRPC: call xs_sock_process_cmsg for all cmsg
Revert "SUNRPC: Don't allow waiting for exiting tasks"
NFS: Fix the marking of the folio as up to date
NFS: nfs_invalidate_folio() must observe the offset and size arguments
NFSv4.2: Serialise O_DIRECT i/o and copy range
NFSv4.2: Serialise O_DIRECT i/o and clone range
NFSv4.2: Serialise O_DIRECT i/o and fallocate()
NFS: Serialise O_DIRECT i/o and truncate()
NFSv4.2: Protect copy offload and clone against 'eof page pollution'
NFS: Protect against 'eof page pollution'
flexfiles/pNFS: fix NULL checks on result of ff_layout_choose_ds_for_read
nfs/localio: avoid bouncing LOCALIO if nfs_client_is_local()
nfs/localio: restore creds before releasing pageio data
NFSv4: Clear the NFS_CAP_XATTR flag if not supported by the server
NFSv4: Clear NFS_CAP_OPEN_XOR and NFS_CAP_DELEGTIME if not supported
NFSv4: Clear the NFS_CAP_FS_LOCATIONS flag if it is not set
NFSv4: Don't clear capabilities that won't be reset
Leon Hwang says:
====================
bpf: Reject bpf_timer for PREEMPT_RT
While running './test_progs -t timer' to validate the test case from
"selftests/bpf: Introduce experimental bpf_in_interrupt()"[0] for
PREEMPT_RT, I encountered a kernel warning:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
To address this, reject bpf_timer usage in the verifier when
PREEMPT_RT is enabled, and skip the corresponding timer selftests.
Changes:
v2 -> v3:
* Drop skipping test case 'timer_interrupt'.
* Address comments from Alexei:
* Respin targeting bpf tree.
* Trim commit log.
v1 -> v2:
* Skip test case 'timer_interrupt'.
Links:
[0] https://lore.kernel.org/bpf/20250903140438.59517-1-leon.hwang@linux.dev/
====================
Link: https://patch.msgid.link/20250910125740.52172-1-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When enable CONFIG_PREEMPT_RT, the kernel will warn when run timer
selftests by './test_progs -t timer':
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
In order to avoid such warning, reject bpf_timer in verifier when
PREEMPT_RT is enabled.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20250910125740.52172-2-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is a place where generic code in messenger.c is reading and
another place where it is writing to con->v1 union member without
checking that the union member is active (i.e. msgr1 is in use).
On 64-bit systems, con->v1.auth_retry overlaps with con->v2.out_iter,
so such a read is almost guaranteed to return a bogus value instead of
0 when msgr2 is in use. This ends up being fairly benign because the
side effect is just the invalidation of the authorizer and successive
fetching of new tickets.
con->v1.connect_seq overlaps with con->v2.conn_bufs and the fact that
it's being written to can cause more serious consequences, but luckily
it's not something that happens often.
Cc: stable@vger.kernel.org
Fixes: cd1a677cad ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Commit 3bbf3565f4 ("svm: Do not intercept CR8 when enable AVIC")
inhibited pre-VMRUN sync of TPR from LAPIC into VMCB::V_TPR in
sync_lapic_to_cr8() when AVIC is active.
AVIC does automatically sync between these two fields, however it does
so only on explicit guest writes to one of these fields, not on a bare
VMRUN.
This meant that when AVIC is enabled host changes to TPR in the LAPIC
state might not get automatically copied into the V_TPR field of VMCB.
This is especially true when it is the userspace setting LAPIC state via
KVM_SET_LAPIC ioctl() since userspace does not have access to the guest
VMCB.
Practice shows that it is the V_TPR that is actually used by the AVIC to
decide whether to issue pending interrupts to the CPU (not TPR in TASKPRI),
so any leftover value in V_TPR will cause serious interrupt delivery issues
in the guest when AVIC is enabled.
Fix this issue by doing pre-VMRUN TPR sync from LAPIC into VMCB::V_TPR
even when AVIC is enabled.
Fixes: 3bbf3565f4 ("svm: Do not intercept CR8 when enable AVIC")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Naveen N Rao (AMD) <naveen@kernel.org>
Link: https://lore.kernel.org/r/c231be64280b1461e854e1ce3595d70cde3a2e9d.1756139678.git.maciej.szmigiero@oracle.com
[sean: tag for stable@]
Signed-off-by: Sean Christopherson <seanjc@google.com>
- Remove redundant __GFP_NOWARN flag is kmalloc
As now __GFP_NOWARN is part of __GFP_NOWAIT, it can be removed from kmalloc
as it is redundant.
- Use copy_from_user_nofault() instead of _inatomic() for trace markers
The trace_marker files are written to to allow user space to quickly write
into the tracing ring buffer. Back in 2016, the get_user_pages_fast() and
the kmap() logic was replaced by a __copy_from_user_inatomic(). But the
_inatomic() is somewhat a misnomer, as if the data being read faults, it can
cause a schedule. This is not something you want to do in an atomic context.
Since the time this was added, copy_from_user_nofault() was added which is
what is actually needed here. Replace the inatomic() with the nofault().
- Fix the assembly markup in the ftrace direct sample code
The ftrace direct sample code (which is also used for selftests), had the
size directive between the "leave" and the "ret" instead of after the ret.
This caused objtool to think the code was unreachable.
- Only call unregister_pm_notifier() on outer most fgraph registration
There was an error path in register_ftrace_graph() that did not call
unregister_pm_notifier() on error, so it was added in the error path.
The problem with that fix, is that register_pm_notifier() is only called by
the initial user of fgraph. If that succeeds, but another fgraph
registration were to fail, then unregister_pm_notifier() would be called
incorrectly.
- Fix a crash in osnoise when zero size cpumask is passed in
If a zero size CPU mask is passed in, the kmalloc() would return
ZERO_SIZE_PTR which is not checked, and the code would continue thinking it
had real memory and crash. If zero is passed in as the size of the write,
simply return 0.
- Fix possible warning in trace_pid_write()
If while processing a series of numbers passed to the "set_event_pid" file,
and one of the updates fails to allocate (triggered by a fault injection),
it can cause a warning to trigger. Check the return value of the call to
trace_pid_list_set() and break out early with an error code if it fails.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaMCL8RQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnNIAQD9lMNjbpKLpTyZw49ZYyfieNPhFLJ/
94FxNKBfmXnYIwD/cBL8KPo9CApbdk5fG8NO2BAM/AK2MJIBKdfMdnseLw4=
=v8gJ
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Remove redundant __GFP_NOWARN flag is kmalloc
As now __GFP_NOWARN is part of __GFP_NOWAIT, it can be removed from
kmalloc as it is redundant.
- Use copy_from_user_nofault() instead of _inatomic() for trace markers
The trace_marker files are written to to allow user space to quickly
write into the tracing ring buffer.
Back in 2016, the get_user_pages_fast() and the kmap() logic was
replaced by a __copy_from_user_inatomic(), but didn't properly
disable page faults around it.
Since the time this was added, copy_from_user_nofault() was added
which does the required page fault disabling for us.
- Fix the assembly markup in the ftrace direct sample code
The ftrace direct sample code (which is also used for selftests), had
the size directive between the "leave" and the "ret" instead of after
the ret. This caused objtool to think the code was unreachable.
- Only call unregister_pm_notifier() on outer most fgraph registration
There was an error path in register_ftrace_graph() that did not call
unregister_pm_notifier() on error, so it was added in the error path.
The problem with that fix, is that register_pm_notifier() is only
called by the initial user of fgraph. If that succeeds, but another
fgraph registration were to fail, then unregister_pm_notifier() would
be called incorrectly.
- Fix a crash in osnoise when zero size cpumask is passed in
If a zero size CPU mask is passed in, the kmalloc() would return
ZERO_SIZE_PTR which is not checked, and the code would continue
thinking it had real memory and crash. If zero is passed in as the
size of the write, simply return 0.
- Fix possible warning in trace_pid_write()
If while processing a series of numbers passed to the "set_event_pid"
file, and one of the updates fails to allocate (triggered by a fault
injection), it can cause a warning to trigger. Check the return value
of the call to trace_pid_list_set() and break out early with an error
code if it fails.
* tag 'trace-v6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Silence warning when chunk allocation fails in trace_pid_write
tracing/osnoise: Fix null-ptr-deref in bitmap_parselist()
trace/fgraph: Fix error handling
ftrace/samples: Fix function size computation
tracing: Fix tracing_marker may trigger page fault during preempt_disable
trace: Remove redundant __GFP_NOWARN
Commit 12ffc3b151 ("PM: Restrict swap use to later in the suspend
sequence") incorrectly removed a pm_restrict_gfp_mask() call from
hibernation_snapshot(), so memory allocations involving swap are not
prevented from being carried out in this code path any more which may
lead to serious breakage.
The symptoms of such breakage have become visible after adding a
shrink_shmem_memory() call to hibernation_snapshot() in commit
2640e81947 ("PM: hibernate: shrink shmem pages after dev_pm_ops.prepare()")
which caused this problem to be much more likely to manifest itself.
However, since commit 2640e81947 was initially present in the DRM
tree that did not include commit 12ffc3b151, the symptoms of this
issue were not visible until merge commit 260f6f4fda ("Merge tag
'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel")
that exposed it through an entirely reasonable merge conflict
resolution.
Fixes: 12ffc3b151 ("PM: Restrict swap use to later in the suspend sequence")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220555
Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Phil has contributed to netfilter with features, fixes and patch reviews
for a long time. Make this more formal and add Reviewer tag.
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
The hash, hash_fast, rhash and bitwise sets may indicate no result even
though a matching element exists during a short time window while other
cpu is finalizing the transaction.
This happens when the hash lookup/bitwise lookup function has picked up
the old genbit, right before it was toggled by nf_tables_commit(), but
then the same cpu managed to unlink the matching old element from the
hash table:
cpu0 cpu1
has added new elements to clone
has marked elements as being
inactive in new generation
perform lookup in the set
enters commit phase:
A) observes old genbit
increments base_seq
I) increments the genbit
II) removes old element from the set
B) finds matching element
C) returns no match: found
element is not valid in old
generation
Next lookup observes new genbit and
finds matching e2.
Consider a packet matching element e1, e2.
cpu0 processes following transaction:
1. remove e1
2. adds e2, which has same key as e1.
P matches both e1 and e2. Therefore, cpu1 should always find a match
for P. Due to above race, this is not the case:
cpu1 observed the old genbit. e2 will not be considered once it is found.
The element e1 is not found anymore if cpu0 managed to unlink it from the
hlist before cpu1 found it during list traversal.
The situation only occurs for a brief time period, lookups happening
after I) observe new genbit and return e2.
This problem exists in all set types except nft_set_pipapo, so fix it once
in nft_lookup rather than each set ops individually.
Sample the base sequence counter, which gets incremented right before the
genbit is changed.
Then, if no match is found, retry the lookup if the base sequence was
altered in between.
If the base sequence hasn't changed:
- No update took place: no-match result is expected.
This is the common case. or:
- nf_tables_commit() hasn't progressed to genbit update yet.
Old elements were still visible and nomatch result is expected, or:
- nf_tables_commit updated the genbit:
We picked up the new base_seq, so the lookup function also picked
up the new genbit, no-match result is expected.
If the old genbit was observed, then nft_lookup also picked up the old
base_seq: nft_lookup_should_retry() returns true and relookup is performed
in the new generation.
This problem was added when the unconditional synchronize_rcu() call
that followed the current/next generation bit toggle was removed.
Thanks to Pablo Neira Ayuso for reviewing an earlier version of this
patchset, for suggesting re-use of existing base_seq and placement of
the restart loop in nft_set_do_lookup().
Fixes: 0cbc06b3fa ("netfilter: nf_tables: remove synchronize_rcu in commit phase")
Signed-off-by: Florian Westphal <fw@strlen.de>
This function was added for retpoline mitigation and is replaced by a
static inline helper if mitigations are not enabled.
Enable this helper function unconditionally so next patch can add a lookup
restart mechanism to fix possible false negatives while transactions are
in progress.
Adding lookup restarts in nft_lookup_eval doesn't work as nft_objref would
then need the same copypaste loop.
This patch is separate to ease review of the actual bug fix.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
This will soon be read from packet path around same time as the gencursor.
Both gencursor and base_seq get incremented almost at the same time, so
it makes sense to place them in the same structure.
This doesn't increase struct net size on 64bit due to padding.
Signed-off-by: Florian Westphal <fw@strlen.de>
When the rbtree lookup function finds a match in the rbtree, it sets the
range start interval to a potentially inactive element.
Then, after tree lookup, if the matching element is inactive, it returns
NULL and suppresses a matching result.
This is wrong and leads to false negative matches when a transaction has
already entered the commit phase.
cpu0 cpu1
has added new elements to clone
has marked elements as being
inactive in new generation
perform lookup in the set
enters commit phase:
I) increments the genbit
A) observes new genbit
B) finds matching range
C) returns no match: found
range invalid in new generation
II) removes old elements from the tree
C New nft_lookup happening now
will find matching element,
because it is no longer
obscured by old, inactive one.
Consider a packet matching range r1-r2:
cpu0 processes following transaction:
1. remove r1-r2
2. add r1-r3
P is contained in both ranges. Therefore, cpu1 should always find a match
for P. Due to above race, this is not the case:
cpu1 does find r1-r2, but then ignores it due to the genbit indicating
the range has been removed. It does NOT test for further matches.
The situation persists for all lookups until after cpu0 hits II) after
which r1-r3 range start node is tested for the first time.
Move the "interval start is valid" check ahead so that tree traversal
continues if the starting interval is not valid in this generation.
Thanks to Stefan Hanreich for providing an initial reproducer for this
bug.
Reported-by: Stefan Hanreich <s.hanreich@proxmox.com>
Fixes: c1eda3c639 ("netfilter: nft_rbtree: ignore inactive matching element with no descendants")
Signed-off-by: Florian Westphal <fw@strlen.de>
The pipapo set type is special in that it has two copies of its
datastructure: one live copy containing only valid elements and one
on-demand clone used during transaction where adds/deletes happen.
This clone is not visible to the datapath.
This is unlike all other set types in nftables, those all link new
elements into their live hlist/tree.
For those sets, the lookup functions must skip the new elements while the
transaction is ongoing to ensure consistency.
As the clone is shallow, removal does have an effect on the packet path:
once the transaction enters the commit phase the 'gencursor' bit that
determines which elements are active and which elements should be ignored
(because they are no longer valid) is flipped.
This causes the datapath lookup to ignore these elements if they are found
during lookup.
This opens up a small race window where pipapo has an inconsistent view of
the dataset from when the transaction-cpu flipped the genbit until the
transaction-cpu calls nft_pipapo_commit() to swap live/clone pointers:
cpu0 cpu1
has added new elements to clone
has marked elements as being
inactive in new generation
perform lookup in the set
enters commit phase:
I) increments the genbit
A) observes new genbit
removes elements from the clone so
they won't be found anymore
B) lookup in datastructure
can't see new elements yet,
but old elements are ignored
-> Only matches elements that
were not changed in the
transaction
II) calls nft_pipapo_commit(), clone
and live pointers are swapped.
C New nft_lookup happening now
will find matching elements.
Consider a packet matching range r1-r2:
cpu0 processes following transaction:
1. remove r1-r2
2. add r1-r3
P is contained in both ranges. Therefore, cpu1 should always find a match
for P. Due to above race, this is not the case:
cpu1 does find r1-r2, but then ignores it due to the genbit indicating
the range has been removed.
At the same time, r1-r3 is not visible yet, because it can only be found
in the clone.
The situation persists for all lookups until after cpu0 hits II).
The fix is easy: Don't check the genbit from pipapo lookup functions.
This is possible because unlike the other set types, the new elements are
not reachable from the live copy of the dataset.
The clone/live pointer swap is enough to avoid matching on old elements
while at the same time all new elements are exposed in one go.
After this change, step B above returns a match in r1-r2.
This is fine: r1-r2 only becomes truly invalid the moment they get freed.
This happens after a synchronize_rcu() call and rcu read lock is held
via netfilter hook traversal (nf_hook_slow()).
Cc: Stefano Brivio <sbrivio@redhat.com>
Fixes: 3c4287f620 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Florian Westphal <fw@strlen.de>
Running new 'set_flush_add_atomic_bitmap' test case for nftables.git
with CONFIG_PROVE_RCU_LIST=y yields:
net/netfilter/nft_set_bitmap.c:231 RCU-list traversed in non-reader section!!
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by nft/4008:
#0: ffff888147f79cd8 (&nft_net->commit_mutex){+.+.}-{4:4}, at: nf_tables_valid_genid+0x2f/0xd0
lockdep_rcu_suspicious+0x116/0x160
nft_bitmap_walk+0x22d/0x240
nf_tables_delsetelem+0x1010/0x1a00
..
This is a false positive, the list cannot be altered while the
transaction mutex is held, so pass the relevant argument to the iterator.
Fixes tag intentionally wrong; no point in picking this up if earlier
false-positive-fixups were not applied.
Fixes: 28b7a6b84c ("netfilter: nf_tables: avoid false-positive lockdep splats in set walker")
Signed-off-by: Florian Westphal <fw@strlen.de>
This reverts commit 0e89ca13ee.
The functional change that depended on this refactoring has been found
to be quite problematic. Reverting the whole pile to start fresh when
new fixes are available.
Message-ID: <20250910180930.3679473-3-oliver.upton@linux.dev>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
This reverts commit e9abe311f3.
syzkaller has managed to tease out multiple bugs in this change and
fixing-forward didn't remedy the situation. Considering newly-introduced
memory safety issues the potential for scheduler stalls don't seem that
bad in comparison
Link: https://lore.kernel.org/kvmarm/68c09802.050a0220.3c6139.000d.GAE@google.com/
Message-ID: <20250910180930.3679473-2-oliver.upton@linux.dev>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When dual-divider clock support was introduced, the P divider offset was
left out of the .recalc_rate readback function. This causes the clock
rate to become bogus or even zero (possibly due to the P divider being
1, leading to a divide-by-zero).
Fix this by incorporating the P divider offset into the calculation.
Fixes: 45717804b7 ("clk: sunxi-ng: mp: introduce dual-divider clock")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250830170901.1996227-4-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
On R-Car Gen3 using PSCI, s2ram powers down the SoC. After resume, the
CAN interface no longer works, until it is brought down and up again.
Fix this by calling rcar_can_start() from the PM resume callback, to
fully initialize the controller instead of just restarting it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/699b2f7fcb60b31b6f976a37f08ce99c5ffccb31.1755165227.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
can_put_echo_skb() takes ownership of the SKB and it may be freed
during or after the call.
However, xilinx_can xcan_write_frame() keeps using SKB after the call.
Fix that by only calling can_put_echo_skb() after the code is done
touching the SKB.
The tx_lock is held for the entire xcan_write_frame() execution and
also on the can_get_echo_skb() side so the order of operations does not
matter.
An earlier fix commit 3d3c817c3a ("can: xilinx_can: Fix usage of skb
memory") did not move the can_put_echo_skb() call far enough.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Fixes: 1598efe57b ("can: xilinx_can: refactor code in preparation for CAN FD support")
Link: https://patch.msgid.link/20250822095002.168389-1-anssi.hannula@bitwise.fi
[mkl: add "commit" in front of sha1 in patch description]
[mkl: fix indention]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Since j1939_sk_bind() and j1939_sk_release() call j1939_local_ecu_put()
when J1939_SOCK_BOUND was already set, but the error handling path for
j1939_sk_bind() will not set J1939_SOCK_BOUND when j1939_local_ecu_get()
fails, j1939_local_ecu_get() needs to undo priv->ents[sa].nusers++ when
j1939_local_ecu_get() returns an error.
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/e7f80046-4ff7-4ce2-8ad8-7c3c678a42c9@I-love.SAKURA.ne.jp
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Commit 25fe97cb76 ("can: j1939: move j1939_priv_put() into sk_destruct
callback") expects that a call to j1939_priv_put() can be unconditionally
delayed until j1939_sk_sock_destruct() is called. But a refcount leak will
happen when j1939_sk_bind() is called again after j1939_local_ecu_get()
from previous j1939_sk_bind() call returned an error. We need to call
j1939_priv_put() before j1939_sk_bind() returns an error.
Fixes: 25fe97cb76 ("can: j1939: move j1939_priv_put() into sk_destruct callback")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/4f49a1bc-a528-42ad-86c0-187268ab6535@I-love.SAKURA.ne.jp
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
syzbot is reporting
unregister_netdevice: waiting for vcan0 to become free. Usage count = 2
problem, for j1939 protocol did not have NETDEV_UNREGISTER notification
handler for undoing changes made by j1939_sk_bind().
Commit 25fe97cb76 ("can: j1939: move j1939_priv_put() into sk_destruct
callback") expects that a call to j1939_priv_put() can be unconditionally
delayed until j1939_sk_sock_destruct() is called. But we need to call
j1939_priv_put() against an extra ref held by j1939_sk_bind() call
(as a part of undoing changes made by j1939_sk_bind()) as soon as
NETDEV_UNREGISTER notification fires (i.e. before j1939_sk_sock_destruct()
is called via j1939_sk_release()). Otherwise, the extra ref on "struct
j1939_priv" held by j1939_sk_bind() call prevents "struct net_device" from
dropping the usage count to 1; making it impossible for
unregister_netdevice() to continue.
Reported-by: syzbot <syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84
Tested-by: syzbot <syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com>
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Fixes: 25fe97cb76 ("can: j1939: move j1939_priv_put() into sk_destruct callback")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/ac9db9a4-6c30-416e-8b94-96e6559d55b2@I-love.SAKURA.ne.jp
[mkl: remove space in front of label]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
A proper kernel configuration for running kselftest can be obtained with:
$ yes | make kselftest-merge
Build of 'vcan' driver is currently missing, while the other required knobs
are already there because of net/link_netns.py [1]. Add a config file in
selftests/net/can to store the minimum set of kconfig needed for CAN
selftests.
[1] https://patch.msgid.link/20250219125039.18024-14-shaw.leon@gmail.com
Fixes: 77442ffa83 ("selftests: can: Import tst-filter from can-tests")
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/fa4c0ea262ec529f25e5f5aa9269d84764c67321.1757516009.git.dcaratti@redhat.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
syzbot reported the splat below. [0]
The repro does the following:
1. Load a sk_msg prog that calls bpf_msg_cork_bytes(msg, cork_bytes)
2. Attach the prog to a SOCKMAP
3. Add a socket to the SOCKMAP
4. Activate fault injection
5. Send data less than cork_bytes
At 5., the data is carried over to the next sendmsg() as it is
smaller than the cork_bytes specified by bpf_msg_cork_bytes().
Then, tcp_bpf_send_verdict() tries to allocate psock->cork to hold
the data, but this fails silently due to fault injection + __GFP_NOWARN.
If the allocation fails, we need to revert the sk->sk_forward_alloc
change done by sk_msg_alloc().
Let's call sk_msg_free() when tcp_bpf_send_verdict fails to allocate
psock->cork.
The "*copied" also needs to be updated such that a proper error can
be returned to the caller, sendmsg. It fails to allocate psock->cork.
Nothing has been corked so far, so this patch simply sets "*copied"
to 0.
[0]:
WARNING: net/ipv4/af_inet.c:156 at inet_sock_destruct+0x623/0x730 net/ipv4/af_inet.c:156, CPU#1: syz-executor/5983
Modules linked in:
CPU: 1 UID: 0 PID: 5983 Comm: syz-executor Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:inet_sock_destruct+0x623/0x730 net/ipv4/af_inet.c:156
Code: 0f 0b 90 e9 62 fe ff ff e8 7a db b5 f7 90 0f 0b 90 e9 95 fe ff ff e8 6c db b5 f7 90 0f 0b 90 e9 bb fe ff ff e8 5e db b5 f7 90 <0f> 0b 90 e9 e1 fe ff ff 89 f9 80 e1 07 80 c1 03 38 c1 0f 8c 9f fc
RSP: 0018:ffffc90000a08b48 EFLAGS: 00010246
RAX: ffffffff8a09d0b2 RBX: dffffc0000000000 RCX: ffff888024a23c80
RDX: 0000000000000100 RSI: 0000000000000fff RDI: 0000000000000000
RBP: 0000000000000fff R08: ffff88807e07c627 R09: 1ffff1100fc0f8c4
R10: dffffc0000000000 R11: ffffed100fc0f8c5 R12: ffff88807e07c380
R13: dffffc0000000000 R14: ffff88807e07c60c R15: 1ffff1100fc0f872
FS: 00005555604c4500(0000) GS:ffff888125af1000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005555604df5c8 CR3: 0000000032b06000 CR4: 00000000003526f0
Call Trace:
<IRQ>
__sk_destruct+0x86/0x660 net/core/sock.c:2339
rcu_do_batch kernel/rcu/tree.c:2605 [inline]
rcu_core+0xca8/0x1770 kernel/rcu/tree.c:2861
handle_softirqs+0x286/0x870 kernel/softirq.c:579
__do_softirq kernel/softirq.c:613 [inline]
invoke_softirq kernel/softirq.c:453 [inline]
__irq_exit_rcu+0xca/0x1f0 kernel/softirq.c:680
irq_exit_rcu+0x9/0x30 kernel/softirq.c:696
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1052 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1052
</IRQ>
Fixes: 4f738adba3 ("bpf: create tcp_bpf_ulp allowing BPF to monitor socket TX/RX data")
Reported-by: syzbot+4cabd1d2fa917a456db8@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68c0b6b5.050a0220.3c6139.0013.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250909232623.4151337-1-kuniyu@google.com
The i2c controller binding does not permit permit the node name to
contain "gpio", resulting in two warnings:
i2c-gpio-0 (i2c-gpio): $nodename:0: 'i2c-gpio-0' does not match '^i2c(@.+|-[a-z0-9]+)?$'
i2c-gpio-0 (i2c-gpio): Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'adc@54' were unexpected)
Drop it to satisfy dtbs_check.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250909-frown-wrinkle-f16df243a970@spud
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The platform and drm devices are only used to look up the drm device and
its driver data respectively when initialising the driver data during
bind().
Drop the reference counts as soon as they have been used to make the
code more readable.
Note that the crtc count is never incremented on lookup failures.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250829090345.21075-3-johan@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
The for_each_child_of_node() helper drops the reference it takes to each
node as it iterates over children and an explicit of_node_put() is only
needed when exiting the loop early.
Drop the recently introduced bogus additional reference count decrement
at each iteration that could potentially lead to a use-after-free.
Fixes: 1f403699c4 ("drm/mediatek: Fix device/node reference count leaks in mtk_drm_get_all_drm_priv")
Cc: Ma Ke <make24@iscas.ac.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250829090345.21075-2-johan@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
When copying FDs, the copy size should not include the control
message header (cmsghdr). Fix it.
Fixes: 5cde6096a4 ("um: generalize os_rcv_fd")
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When register_virtio_device() fails in virtio_uml_probe(),
the code sets vu_dev->registered = 1 even though
the device was not successfully registered.
This can lead to use-after-free or other issues.
Fixes: 04e5b1fb01 ("um: virtio: Remove device on disconnect")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On one of my machines UML failed to start after enabling
SELinux.
UML failed to start because SELinux's execmod rule denies
executable pages on a modified file mapping.
Historically UML marks it's stack rwx.
AFAICT, these days this is no longer needed, so let's remove
PROT_EXEC.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Very similar to OneXFly devices. Uses the same registers.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20250904132252.3041613-2-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
It is a special edition of X1Pro with a different color.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20250904132252.3041613-1-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The intel_pstate driver manages CPU capacity changes itself and it does
not need an update of the capacity of all CPUs in the system to be
carried out after registering a PD.
Moreover, in some configurations (for instance, an SMT-capable
hybrid x86 system booted with nosmt in the kernel command line) the
em_check_capacity_update() call at the end of em_dev_register_perf_domain()
always fails and reschedules itself to run once again in 1 s, so
effectively it runs in vain every 1 s forever.
To address this, introduce a new variant of em_dev_register_perf_domain(),
called em_dev_register_pd_no_update(), that does not invoke
em_check_capacity_update(), and make intel_pstate use it instead of the
original.
Fixes: 7b010f9b90 ("cpufreq: intel_pstate: EAS support for hybrid platforms")
Closes: https://lore.kernel.org/linux-pm/40212796-734c-4140-8a85-854f72b8144d@panix.com/
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The function vgic_flush_lr_state() is calling _raw_spin_unlock()
instead of the proper raw_spin_unlock().
_raw_spin_unlock() is an internal low-level API and should not
be used directly; using raw_spin_unlock() ensures proper locking
semantics in the vgic code.
Fixes: 8fa3adb8c6 ("KVM: arm/arm64: vgic: Make vgic_irq->irq_lock a raw_spinlock")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-ID: <20250908180413.3655546-1-alok.a.tiwari@oracle.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
In the non-NV case, read permission is always granted when mapping
stage-2, so checking for it doesn't bring much. On the other hand,
shadow stage-2 for NV guests could potentially have non-readable
mappings when we align the permissions with those that L1 set for L2, we
shouldn't be checking for read faults in this case either.
So just remove this check.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Wei-Lin Chang <r09922117@csie.ntu.edu.tw>
Link: https://lore.kernel.org/r/20250908064806.4093081-1-r09922117@csie.ntu.edu.tw
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
