Accessing BSS will no longer be permitted from the startup code in
arch/arm64/kernel/pi, as some of it executes before BSS is cleared.
Clearing BSS earlier would involve managing cache coherency explicitly
in software, which is a hassle we prefer to avoid.
So move some variables that are assigned by the startup code out of BSS
and into .data.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250508114328.2460610-7-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
init_pgdir[] is only referenced from the startup code, but lives after
BSS in the linker map. Before tightening the rules about accessing BSS
from startup code, move init_pgdir[] into the __pi_ namespace, so it
does not need to be exported explicitly.
For symmetry, do the same with init_idmap_pgdir[], although it lives
before BSS.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Link: https://lore.kernel.org/r/20250508114328.2460610-6-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
When an XDR counted array has a maximum element count, xdrgen adds
a bounds check to the encoder or decoder for that type. But in cases
where the .x provides no maximum element count, such as
struct notify4 {
/* composed from notify_type4 or notify_deviceid_type4 */
bitmap4 notify_mask;
notifylist4 notify_vals;
};
struct CB_NOTIFY4args {
stateid4 cna_stateid;
nfs_fh4 cna_fh;
notify4 cna_changes<>;
};
xdrgen is supposed to omit that bounds check. Some of the Jinja2
templates handle that correctly, but a few are incorrect and leave
the bounds check in place with a maximum of zero, which causes
encoding/decoding of that type to fail unconditionally.
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Upon detecting the ID for the ESMT F50D1G41LB chip, the fifth byte
returned is always 0x00 instead of the expected JEDEC continuation code
of 0x7f. This causes detection to fail:
[ 0.304399] spi-nand spi0.0: unknown raw ID c8117f7f00
[ 0.508943] spi-nand: probe of spi0.0 failed with error -524
So let's revert back to the 4 byte ID code for this chip
specifically.
Fixes: 4bd14b2fd8 ("mtd: spinand: esmt: Extend IDs to 5 bytes")
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
last_cmd and last_byte are now unused brcmnand_host members.
last_addr is only written and never read so we can remove it too.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
blk-mq-dma.c was split from blk-merge.c which has no copyright notice,
but except for some boilerplate code and comments left from the old
version this is all my code, so add my copyright.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250513071433.836797-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While working on the new DMA API I kept getting annoyed how it was placed
right in the middle of the bio splitting code in blk-merge.c.
Split it out into a separate file.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250513071433.836797-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If perf is running with a benchmark then we want the retirement
latency samples associated with the benchmark rather than from the
system as a whole.
Use the workload's PID to filter out samples that aren't from the
workload or its children.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Weilin Wang <weilin.wang@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250430200108.243234-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix a typo in the sysfs documentation for the CXL "write_bandwidth"
attribute path. The attribute was incorrectly documented as write_banwidth.
Update it to the correct write_bandwidth to align with the actual
implementation.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250516103855.3820882-1-alok.a.tiwari@oracle.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Make the logic of handling the InitializeFileRecordSegment operation
similar to that in windows.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
For all the complexity of handling affinity for CPU hotplug, what we've
apparently managed to overlook is that arm_cmn_init_irqs() has in fact
always been setting the *initial* affinity of all IRQs to CPU 0, not the
CPU we subsequently choose for event scheduling. Oh dear.
Cc: stable@vger.kernel.org
Fixes: 0ba64770a2 ("perf: Add Arm CMN-600 PMU driver")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/b12fccba6b5b4d2674944f59e4daad91cd63420b.1747069914.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
When running 'make' in tools/testing/selftests/arm64/ without explicitly
setting the OUTPUT variable, the build system will creates test
directories (e.g., /bti) in the root filesystem due to OUTPUT defaulting
to an empty string. This causes unintended pollution of the root directory.
This patch adds proper handling for the OUTPUT variable: Sets OUTPUT
to the current directory (.) if not specified
Signed-off-by: tanze <tanze@kylinos.cn>
Link: https://lore.kernel.org/r/20250515051839.3409658-1-tanze@kylinos.cn
Signed-off-by: Will Deacon <will@kernel.org>
The values stored in __boot_cpu_mode were changed without updating the
comment. Rectify that.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Link: https://lore.kernel.org/r/20250513124525.677736-1-ben.horgan@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
pmd_val(pmd) is redundant because a positive pmd_present(pmd) ensures
a positive pmd_val(pmd) according to their definitions like below.
#define pmd_val(x) ((x).pmd)
#define pmd_present(pmd) pte_present(pmd_pte(pmd))
#define pte_present(pte) (pte_valid(pte) || pte_present_invalid(pte))
#define pte_valid(pte) (!!(pte_val(pte) & PTE_VALID))
#define pte_present_invalid(pte) \
((pte_val(pte) & (PTE_VALID | PTE_PRESENT_INVALID)) == PTE_PRESENT_INVALID)
pte_present() can't be positive unless either of the flag PTE_VALID or
PTE_PRESENT_INVALID is set. In this case, pmd_val(pmd) should be positive
either.
So lets drop the redundant check pmd_val(pmd) and no functional changes
intended.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250508085251.204282-1-gshan@redhat.com
Signed-off-by: Will Deacon <will@kernel.org>
mov_q cannot really move PIE_E[0|1] macros into a general purpose register
as expected if those macro constants contain some 128 bit layout elements,
that are required for D128 page tables. The primary issue is that for D128,
PIE_E[0|1] are defined in terms of 128-bit types with shifting and masking,
which the assembler can't accommodate.
Instead pre-calculate these PIRE0_EL1/PIR_EL1 constants into asm-offsets.h
based PIE_E0_ASM/PIE_E1_ASM which can then be used in arch/arm64/mm/proc.S.
While here also drop PTE_MAYBE_NG/PTE_MAYBE_SHARED assembly overrides which
are not required any longer, as the compiler toolchains are smart enough to
compute both the PIE_[E0|E1]_ASM constants in all scenarios.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://lore.kernel.org/r/20250429050511.1663235-1-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
As opposed to open-code, use ERR_CAST to clearly indicate that this is a
pointer to an error value and a type conversion is performed.
Signed-off-by: Zhang Enpei <zhang.enpei@zte.com.cn>
Link: https://lore.kernel.org/r/20250515201108576jof-gkjSxRfMaGDgKo-pc@zte.com.cn
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
As specified in section 11.4.13 of the ACPI specification the
operating system is required to evaluate the _ACx and _PSV objects
after executing the _SCP control method.
Move the execution of the _SCP control method before the invocation
of acpi_thermal_get_trip_points() to avoid missing updates to the
_ACx and _PSV objects.
Fixes: b09872a652 ("ACPI: thermal: Fold acpi_thermal_get_info() into its caller")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20250410165456.4173-3-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As specified in section 5.7.2 of the ACPI specification the feature
group string "3.0 _SCP Extensions" implies that the operating system
evaluates the _SCP control method with additional parameters.
However the ACPI thermal driver evaluates the _SCP control method
without those additional parameters, conflicting with the above
feature group string advertised to the firmware thru _OSI.
Stop advertising support for this feature string to avoid confusing
the ACPI firmware.
Fixes: e5f660ebef ("ACPI / osi: Collect _OSI handling into one single file")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20250410165456.4173-2-W_Armin@gmx.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
"&chan->cgrp->mutex" and "&cgrp->mutex" are the same thing. Use
"&cgrp->mutex" consistently. It looks nicer and it silences a
Smatch static checker warning.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/aBHaCM66pXaP84ei@stanley.mountain
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
With all of the boundary conditions when streaming the commands B2B in our
validation (part of the reason we added the flush), the Flush effectively
serializes the transmission of each command enqueued within the command
dispatcher to one per V. Blank line which simplifies the behavior of the
High Speed Arbitration.
So, unless we absolutely have to burst these to the Sink, we should be
using the Pipeline Flush bit to serialize the commands.
Bspec: 19742, 50193
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14247
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Gareth Yu <gareth.yu@intel.com>
Link: https://lore.kernel.org/r/20250509092539.763389-1-gareth.yu@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In nouveau_fence_done(), a fence is checked for being signaled by
manually evaluating the base fence's bits. This can be done in a
canonical manner through dma_fence_is_signaled().
Replace the bit-check with dma_fence_is_signaled().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250424130254.42046-6-phasta@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
nouveau_fence_done() contains an if branch that checks whether a
nouveau_fence has either of the two existing nouveau_fence backend ops,
which will always evaluate to true.
Remove the surplus check.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250424130254.42046-5-phasta@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
nouveau_fence_signal() returns a de-facto boolean to indicate when
nvif_event_block() shall be called.
The code can be made more compact and readable by calling
nvif_event_block() in nouveau_fence_update() directly.
Make those calls in nouveau_fence.c more canonical.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250424130254.42046-4-phasta@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
nouveau_fence.c iterates over lists in a non-canonical way. Since the
operations done are just basic for-each-loops and list-empty checks,
they should be written in the standard form.
Use standard list operations.
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250424130254.42046-3-phasta@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
For built with CONFIG_PROVE_RCU=y and CONFIG_PREEMPT_RT=y kernels,
Disable BH does not change the SOFTIRQ corresponding bits in
preempt_count(), but change current->softirq_disable_cnt, this
resulted in the following splat:
WARNING: suspicious RCU usage
kernel/rcu/tree_plugin.h:36 Unsafe read of RCU_NOCB offloaded state!
stack backtrace:
CPU: 0 UID: 0 PID: 22 Comm: rcuc/0
Call Trace:
[ 0.407907] <TASK>
[ 0.407910] dump_stack_lvl+0xbb/0xd0
[ 0.407917] dump_stack+0x14/0x20
[ 0.407920] lockdep_rcu_suspicious+0x133/0x210
[ 0.407932] rcu_rdp_is_offloaded+0x1c3/0x270
[ 0.407939] rcu_core+0x471/0x900
[ 0.407942] ? lockdep_hardirqs_on+0xd5/0x160
[ 0.407954] rcu_cpu_kthread+0x25f/0x870
[ 0.407959] ? __pfx_rcu_cpu_kthread+0x10/0x10
[ 0.407966] smpboot_thread_fn+0x34c/0xa50
[ 0.407970] ? trace_preempt_on+0x54/0x120
[ 0.407977] ? __pfx_smpboot_thread_fn+0x10/0x10
[ 0.407982] kthread+0x40e/0x840
[ 0.407990] ? __pfx_kthread+0x10/0x10
[ 0.407994] ? rt_spin_unlock+0x4e/0xb0
[ 0.407997] ? rt_spin_unlock+0x4e/0xb0
[ 0.408000] ? __pfx_kthread+0x10/0x10
[ 0.408006] ? __pfx_kthread+0x10/0x10
[ 0.408011] ret_from_fork+0x40/0x70
[ 0.408013] ? __pfx_kthread+0x10/0x10
[ 0.408018] ret_from_fork_asm+0x1a/0x30
[ 0.408042] </TASK>
Currently, triggering an rdp offloaded state change need the
corresponding rdp's CPU goes offline, and at this time the rcuc
kthreads has already in parking state. this means the corresponding
rcuc kthreads can safely read offloaded state of rdp while it's
corresponding cpu is online.
This commit therefore add softirq_count() check for
Preempt-RT kernels.
Suggested-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
It's safer to using kcalloc() because it can prevent overflow
problem.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Su Hui <suhui@nfschina.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
This patch adjust the example code with following two purpose:
* reduce the confusion on not releasing e->lock
* emphasize e is valid and not stale with e->lock held
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Boqun Feng <boqun.feng@gmail.com>
CC: Alan Huang <mmpgouride@gmail.com>
Reviewed-by: Alan Huang <mmpgouride@gmail.com>
Link: https://lore.kernel.org/r/20250218005047.27258-1-richard.weiyang@gmail.com
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
This commit adds the 2024 LWN RCU API article set.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
This reverts commit f7345ccc62.
swake_up_one_online() has been removed because hrtimers can now assign
a proper online target to hrtimers queued from offline CPUs. Therefore
remove the related hackery.
Link: https://lore.kernel.org/all/20241231170712.149394-4-frederic@kernel.org/
Reviewed-by: Usama Arif <usamaarif642@gmail.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Currently the implementation of "Guard" methods are basically wrappers
around rcu's function within kernel. Building the kernel with llvm
18.1.8 on x86_64 machine will generate the following symbols:
$ nm vmlinux | grep ' _R'.*Guard | rustfilt
ffffffff817b6c90 T <kernel::sync::rcu::Guard>::new
ffffffff817b6cb0 T <kernel::sync::rcu::Guard>::unlock
ffffffff817b6cd0 T <kernel::sync::rcu::Guard as core::ops::drop::Drop>::drop
ffffffff817b6c90 T <kernel::sync::rcu::Guard as core::default::Default>::default
These Rust symbols are basically wrappers around functions
"rcu_read_lock" and "rcu_read_unlock". Marking them as inline can
reduce the generation of these symbols, and saves the size of code
generation for 132 bytes.
$ ./scripts/bloat-o-meter vmlinux_old vmlinux_new
(Output is demangled for readability)
add/remove: 0/10 grow/shrink: 0/1 up/down: 0/-132 (-132)
Function old new delta
rust_driver_pci::SampleDriver::probe 1041 1034 -7
kernel::sync::rcu::Guard::default 9 - -9
kernel::sync::rcu::Guard::drop 9 - -9
kernel::sync::rcu::read_lock 9 - -9
kernel::sync::rcu::Guard::unlock 9 - -9
kernel::sync::rcu::Guard::new 9 - -9
__pfx__kernel::sync::rcu::Guard::default 16 - -16
__pfx__kernel::sync::rcu::Guard::drop 16 - -16
__pfx__kernel::sync::rcu::read_lock 16 - -16
__pfx__kernel::sync::rcu::Guard::unlock 16 - -16
__pfx__kernel::sync::rcu::Guard::new 16 - -16
Total: Before=23365955, After=23365823, chg -0.00%
Link: https://github.com/Rust-for-Linux/linux/issues/1145
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
It's now ok to perform a wake-up from an offline CPU because the
resulting armed scheduler bandwidth hrtimers are now correctly targeted
by hrtimer infrastructure.
Remove the obsolete hackerry.
Link: https://lore.kernel.org/all/20241231170712.149394-3-frederic@kernel.org/
Reviewed-by: Usama Arif <usamaarif642@gmail.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
This patch updates Zqiang's email address to qiang.zhang@linux.dev.
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Acked-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
PolarFire SoC may be configured in a way that requires non-coherent DMA
handling. On RISC-V, buses are coherent by default & the dma-noncoherent
property is required to denote buses or devices that are non-coherent.
For some reason, instead of adding dma-noncoherent to the binding
the pointless, NOP, property dma-coherent was. Swap dma-coherent for
dma-noncoherent.
Fixes: 04aa999eb9 ("dt-bindings: PCI: microchip,pcie-host: Allow dma-noncoherent")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250516-datebook-senator-ff7a1c30cbd5@spud
A collection of driver specific fixes that built up over the past few
weeks, plus one core patch which fixes handling of topology files where
some DAI names are substrings of others.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmgnIQcACgkQJNaLcl1U
h9C/6Qf/SGOcnljK2eFi2gyUSSQT/eyHLegITy6Ai/avn2a7iH8h38uDbMig8aI+
EETUC895QhXk8lqAmtj4vIoBcrkU6gFT6KOvOkObLh6Wnjv0wDmfrb4+/XxH5A7p
l9v+/EBWHSK3qHGi/4AwniS7uZNj1AqoC6VkRHDAh9mSTxieucUc7LDqujjbHYmT
n+SdSAhkWRrZzmSRELorLon3BMFBwS7W6SbTyz8CNJEVF6LHsLyo9bxtg6fp/A/E
4ZavIq+ayjijFXWptfcEXuFF2FByOZ4oGG4Arrmal7MA7H7xgKu5oqQ8CNkOgmSx
dO5X/N529hsCukHYiwIiwpw12mCvWQ==
=Zk3J
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.15-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.15
A collection of driver specific fixes that built up over the past few
weeks, plus one core patch which fixes handling of topology files where
some DAI names are substrings of others.
resctrl has existed for quite a while as a filesystem interface private to
arch/x86. To allow other architectures to support the same user interface
for similar hardware features, it has been moved to /fs/.
Add those with a vested interest in the common code as reviewers.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Dave Martin <Dave.Martin@arm.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-26-james.morse@arm.com
Resctrl is a filesystem interface to hardware that provides cache
allocation policy and bandwidth control for groups of tasks or CPUs.
To support more than one architecture, resctrl needs to live in /fs/.
Move the code that is concerned with the filesystem interface to
/fs/resctrl.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-25-james.morse@arm.com
x86 has an array, rdt_resources_all[], of all possible resources.
The for-each-resource walkers depend on the rid field of all
resources being initialised.
If the array ever grows due to another architecture adding a resource
type that is not defined on x86, the for-each-resources walkers will
loop forever.
Initialise all the rid values in resctrl_arch_late_init() before
any for-each-resource walker can be called.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-24-james.morse@arm.com
checkpatch.pl identifies some direct #includes of asm headers that
can be satisfied by including the corresponding <linux/...> header
instead.
Fix them.
No intentional functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-23-james.morse@arm.com
rdt_init_fs_context() sizes a typed allocation using an explicit
sizeof(type) expression, which checkpatch.pl complains about.
Since this code is about to be factored out and made generic, this
is a good opportunity to fix the code to size the allocation based
on the target pointer instead, to reduce the chance of future mis-
maintenance.
Fix it.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-22-james.morse@arm.com
The commit below reworked how iommu_put_pages_list() worked to not do
list_del() on every entry. This was done expecting all the callers to
already re-init the list so doing a per-item deletion is not
efficient.
It was missed that fq_ring_free_locked() re-uses its list after calling
iommu_put_pages_list() and so the leftover list reaches free'd struct
pages and will crash or WARN/BUG/etc.
Reinit the list to empty in fq_ring_free_locked() after calling
iommu_put_pages_list().
Audit to see if any other callers of iommu_put_pages_list() need the list
to be empty:
- iommu_dma_free_fq_single() and iommu_dma_free_fq_percpu() immediately
frees the memory
- iommu_v1_map_pages(), v1_free_pgtable(), domain_exit(),
riscv_iommu_map_pages() uses a stack variable which goes out of scope
- intel_iommu_tlb_sync() uses a gather in a iotlb_sync() callback, the
caller re-inits the gather
Fixes: 13f43d7cf3 ("iommu/pages: Formalize the freelist API")
Reported-by: Borah, Chaitanya Kumar <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/r/SJ1PR11MB61292CE72D7BE06B8810021CB997A@SJ1PR11MB6129.namprd11.prod.outlook.com
Tested-by: Borah, Chaitanya Kumar <chaitanya.kumar.borah@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-7d4dfa6140f7+11f04-iommu_freelist_init_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
checkpatch.pl complains about some whitespace anomalies in the
resctrl core code.
This doesn't matter, but since this code is about to be factored
out and made generic, this is a good opportunity to fix these
issues and so reduce future checkpatch fuzz.
Fix them.
No functional change.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Fenghua Yu <fenghuay@nvidia.com>
Tested-by: Peter Newman <peternewman@google.com>
Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com>
Tested-by: Amit Singh Tomar <amitsinght@marvell.com> # arm64
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> # arm64
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/20250515165855.31452-21-james.morse@arm.com
In the case of ICH_LR<n>.HW == 1, bit 41 of LR is just a part of pINTID
without EOI meaning, and bit 41 will be zeroed by the subsequent clearing
of ICH_LR_PHYS_ID_MASK anyway.
No functional changes intended.
Signed-off-by: Wei-Lin Chang <r09922117@csie.ntu.edu.tw>
Link: https://lore.kernel.org/r/20250512133223.866999-1-r09922117@csie.ntu.edu.tw
Signed-off-by: Marc Zyngier <maz@kernel.org>
When MTE is supported but MTE_ASYMM is not (ID_AA64PFR1_EL1.MTE == 2)
ID_AA64PFR1_EL1.MTE_frac == 0xF indicates MTE_ASYNC is unsupported
and MTE_frac == 0 indicates it is supported.
As MTE_frac was previously unconditionally read as 0 from the guest
and user-space, check that using SET_ONE_REG to set it to 0 succeeds
but does not change MTE_frac from unsupported (0xF) to supported (0).
This is required as values originating from KVM from user-space must
be accepted to avoid breaking migration.
Also, to allow this MTE field to be tested, enable KVM_ARM_CAP_MTE
for the set_id_regs test. No effect on existing tests is expected.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Link: https://lore.kernel.org/r/20250512114112.359087-4-ben.horgan@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
If MTE_frac is masked out unconditionally then the guest will always
see ID_AA64PFR1_EL1_MTE_frac as 0. However, a value of 0 when
ID_AA64PFR1_EL1_MTE is 2 indicates that MTE_ASYNC is supported. Hence, for
a host with ID_AA64PFR1_EL1_MTE==2 and ID_AA64PFR1_EL1_MTE_frac==0xf
(MTE_ASYNC unsupported) the guest would see MTE_ASYNC advertised as
supported whilst the host does not support it. Hence, expose the sanitised
value of MTE_frac to the guest and user-space.
As MTE_frac was previously hidden, always 0, and KVM must accept values
from KVM provided by user-space, when ID_AA64PFR1_EL1.MTE is 2 allow
user-space to set ID_AA64PFR1_EL1.MTE_frac to 0. However, ignore it to
avoid incorrectly claiming hardware support for MTE_ASYNC in the guest.
Note that linux does not check the value of ID_AA64PFR1_EL1_MTE_frac and
wrongly assumes that MTE async faults can be generated even on hardware
that does nto support them. This issue is not addressed here.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Link: https://lore.kernel.org/r/20250512114112.359087-3-ben.horgan@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
KVM exposes the sanitised ID registers to guests. Currently these ignore
the ID_AA64PFR1_EL1.MTE_frac field, meaning guests always see a value of
zero.
This is a problem for platforms without the MTE_ASYNC feature where
ID_AA64PFR1_EL1.MTE==0x2 and ID_AA64PFR1_EL1.MTE_frac==0xf. KVM forces
MTE_frac to zero, meaning the guest believes MTE_ASYNC is supported, when
no async fault will ever occur.
Before KVM can fix this, the architecture needs to sanitise the ID
register field for MTE_frac.
Linux itself does not use MTE_frac field and just assumes MTE async faults
can be generated if MTE is supported.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Link: https://lore.kernel.org/r/20250512114112.359087-2-ben.horgan@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Previously, the OSTM driver's platform probe path was only enabled for
selected SoCs (e.g., RZ/G2L and RZ/V2H) due to issues on RZ/Ax (ARM32)
SoCs, which encountered IRQ conflicts like:
/soc/timer@e803b000: used for clock events
genirq: Flags mismatch irq 16. 00215201 (timer@e803c000) vs. 00215201 (timer@e803c000)
Failed to request irq 16 for /soc/timer@e803c000
renesas_ostm e803c000.timer: probe with driver renesas_ostm failed with error -16
These issues have since been resolved by commit 37385c0772
("clocksource/drivers/renesas-ostm: Avoid reprobe after successful early
probe"), which prevents reprobe on successfully initialized early timers.
With this fix in place, there is no longer a need to restrict platform
probing based on SoC-specific configs. This change unconditionally enables
reprobe support for all SoCs, simplifying the logic and avoiding the need
to update the configuration for every new Renesas SoC with OSTM.
Additionally, the `ostm_of_table` is now marked with `__maybe_unused` to
fix a build warning when `CONFIG_OF` is disabled.
RZ/A1 and RZ/A2 remain unaffected with this change.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250515182207.329176-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Document support for the Renesas OS Timer (OSTM) found on the Renesas
RZ/V2N (R9A09G056) SoC. The OSTM IP on RZ/V2N is identical to that on
other RZ families, so no driver changes are required as `renesas,ostm`
will be used as fallback compatible.
Also update the bindings to require the "resets" property for RZ/V2N
by inverting the logic: all SoCs except RZ/A1 and RZ/A2 now require
the "resets" property.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250515182207.329176-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Grabbing the work_mutex keeps probe_active_paths() from running at the
same time as multipath_message(). The only messages that could interfere
with probing the paths are "disable_group", "enable_group", and
"switch_group". These messages could force multipath to pick a new
pathgroup while probe_active_paths() was probing the current pathgroup.
If the multipath device has a hardware handler, and it switches active
pathgroups while there is outstanding IO to a path device, it's possible
that IO to the path will fail, even if the path would be usable if it
was in the active pathgroup. To avoid this, do not clear the current
pathgroup for the *_group messages while probe_active_paths() is
running. Instead set a flag, and probe_active_paths() will clear the
current pathgroup when it finishes probing the paths. For this to work
correctly, multipath needs to check current_pg before next_pg in
choose_pgpath(), but before this patch next_pg was only ever set when
current_pg was cleared, so this doesn't change the current behavior when
paths aren't being probed. Even with this change, it is still possible
to switch pathgroups while the probe is running, but only if all the
paths have failed, and the probe function will skip them as well in this
case.
If multiple DM_MPATH_PROBE_PATHS requests are received at once, there is
no point in repeatedly issuing test IOs. Instead, the later probes
should wait for the current probe to complete. If current pathgroup is
still the same as the one that was just checked, the other probes should
skip probing and just check the number of valid paths. Finally, probing
the paths should quit early if the multipath device is trying to
suspend, instead of continuing to issue test IOs, delaying the suspend.
While this patch will not change the behavior of existing multipath
users which don't use the DM_MPATH_PROBE_PATHS ioctl, when that ioctl
is used, the behavior of the "disable_group", "enable_group", and
"switch_group" messages can change subtly. When these messages return,
the next IO to the multipath device will no longer be guaranteed to
choose a new pathgroup. Instead, choosing a new pathgroup could be
delayed by an in-progress DM_MPATH_PROBE_PATHS ioctl. The userspace
multipath tools make no assumptions about what will happen to IOs after
sending these messages, so this change will not effect already released
versions of them, even if the DM_MPATH_PROBE_PATHS ioctl is run
alongside them.
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
