MAX_TAG_SIZE was 0x1a8 and it may be truncated in the "bi->metadata_size
= ic->tag_size" assignment. We need to limit it to 255.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
In all the MUX value for LED1 GPIO46 there is a Copy-Paste error where
the MUX value is set to LED0_MODE_MASK instead of LED1_MODE_MASK.
This wasn't notice as there were no board that made use of the
secondary PHY LED but looking at the internal Documentation the actual
value should be LED1_MODE_MASK similar to the other GPIO entry.
Fix the wrong value to apply the correct MUX configuration.
Cc: stable@vger.kernel.org
Fixes: 1c8ace2d07 ("pinctrl: airoha: Add support for EN7581 SoC")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Support for parsing the topology on AMD/Hygon processors using CPUID leaf 0xb
was added in
3986a0a805 ("x86/CPU/AMD: Derive CPU topology from CPUID function 0xB when available").
In an effort to keep all the topology parsing bits in one place, this commit
also introduced a pseudo dependency on the TOPOEXT feature to parse the CPUID
leaf 0xb.
The TOPOEXT feature (CPUID 0x80000001 ECX[22]) advertises the support for
Cache Properties leaf 0x8000001d and the CPUID leaf 0x8000001e EAX for
"Extended APIC ID" however support for 0xb was introduced alongside the x2APIC
support not only on AMD [1], but also historically on x86 [2].
Similar to 0xb, the support for extended CPU topology leaf 0x80000026 too does
not depend on the TOPOEXT feature.
The support for these leaves is expected to be confirmed by ensuring
leaf <= {extended_}cpuid_level
and then parsing the level 0 of the respective leaf to confirm EBX[15:0]
(LogProcAtThisLevel) is non-zero as stated in the definition of
"CPUID_Fn0000000B_EAX_x00 [Extended Topology Enumeration]
(Core::X86::Cpuid::ExtTopEnumEax0)" in Processor Programming Reference (PPR)
for AMD Family 19h Model 01h Rev B1 Vol1 [3] Sec. 2.1.15.1 "CPUID Instruction
Functions".
This has not been a problem on baremetal platforms since support for TOPOEXT
(Fam 0x15 and later) predates the support for CPUID leaf 0xb (Fam 0x17[Zen2]
and later), however, for AMD guests on QEMU, the "x2apic" feature can be
enabled independent of the "topoext" feature where QEMU expects topology and
the initial APICID to be parsed using the CPUID leaf 0xb (especially when
number of cores > 255) which is populated independent of the "topoext" feature
flag.
Unconditionally call cpu_parse_topology_ext() on AMD and Hygon processors to
first parse the topology using the XTOPOLOGY leaves (0x80000026 / 0xb) before
using the TOPOEXT leaf (0x8000001e).
While at it, break down the single large comment in parse_topology_amd() to
better highlight the purpose of each CPUID leaf.
Fixes: 3986a0a805 ("x86/CPU/AMD: Derive CPU topology from CPUID function 0xB when available")
Suggested-by: Naveen N Rao (AMD) <naveen@kernel.org>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org # Only v6.9 and above; depends on x86 topology rewrite
Link: https://lore.kernel.org/lkml/1529686927-7665-1-git-send-email-suravee.suthikulpanit@amd.com/ [1]
Link: https://lore.kernel.org/lkml/20080818181435.523309000@linux-os.sc.intel.com/ [2]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 [3]
A bug reported by one of my customers that the order of TAS2781
calibrated-data is incorrect, the correct way is to move R0_Low
and insert it between R0 and InvR0.
Fixes: 4fe2385134 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250907222728.988-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The logic of the headphone detect pin seems to be inverted, with this
change headphones actually output sound when plugged in.
Does not need workaround of using pin-switches to enable output.
Verified by checking /sys/kernel/debug/gpio.
Fixes: ae46756faf ("arm64: dts: rockchip: analog audio on Orange Pi 5")
Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com>
Link: https://lore.kernel.org/r/20250904030150.986042-1-honyuenkwun@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
FriendlyELEC NanoPC-T6 LTS schematics shows VCC_1V8_S3 being used to
power SPI NOR chip.
This fixes the following kernel message:
spi-nor spi5.0: supply vcc not found, using dummy regulator
Signed-off-by: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
Link: https://lore.kernel.org/r/20250905-nanopc-t6-spi-nor-v2-1-098b476d9509@juszkiewicz.com.pl
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
to the while() loop in __iter_div_u64_rem(), when the AUX-clock
is enabled.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmi9XZURHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1gVzg/+N3T4qL8Vi3HwOzN862EqmVdaEauAVkQU
vlIxFbUX26KHmwoSYpsVlaswhONMa6tkNEz3zeOfECrK6SAIg/9SGuk/1bRqERCc
4KX3g0S0b7qfC7VJmjsmswXmxM9MrXLY5dx/XzhbACpGVoTJAMLlXL0OVwS361fP
VOH4zSRCPUl+IbTJ6CkVQKZYWZAXxDuxBaSAsMaUz2QMZck6ikGOKP7CT9se0Fk5
Rve7bC0Wy2vuUfchCIagSE9U28rf7HDawqJVEOygtRQm/Hl7yKSUxaHO5LdSI7c/
k7mCoZkdyqj3Pdbe26CFSyvGdNJ+gHIhOSzaO43kHTf+bpgW/WBWm6DLjGWl8eKP
EAW7QMkFoQaNWhSUbPwOR68R7fR3CsvmU1SOXufIRVKjuDy+246gu6y1nvJFr3RS
BQyBPUh3qAJUoJj00nvjxtLB9p0pI2C+0ml7GTWEX3Ao8Y7rPPKh8yR2CvIhdmI4
Oo4/vRtcs9NGYKzSu7gknYSkxITsjfEInCkmdsDVQ503QuUAgL653z8rjUIfTIti
72fJ3pqVUyJuv9xyRkzQcavyZtU/l8uSfMNzgmHen8zmPjKA6rXg+BiuhP4uQ10W
Wxw2s0cP3RgvuL3+y9oQHq3VHJ4JfdNVOKVssd97zCvmwFKCOXxi+0eKCy9ELQPq
nNpuOC/9API=
=5NRx
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2025-09-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Fix a severe slowdown regression in the timer vDSO code related to the
while() loop in __iter_div_u64_rem(), when the AUX-clock is enabled"
* tag 'timers-urgent-2025-09-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
vdso/vsyscall: Avoid slow division loop in auxiliary clock update
- An LTO fix for clang when building with CONFIG_CMODEL_MEDLOW
- A fix for ACPI CPPC CSR read/write return values
- Several fixes for incorrect access widths in thread_info.cpu reads
- A fix for an issue in __put_user_nocheck() that was causing the glibc
tst-socket-timestamp test to fail
- A fix to initialize struct kexec_buf records in several kexec-related
functions, which were generating UBSAN warnings
- Two fixes for sparse warnings
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEElRDoIDdEz9/svf2Kx4+xDQu9KksFAmi7X/YACgkQx4+xDQu9
KkvvqRAAnZwgWgOJYPSrlpoxZ/uk/J8tU5ULsdkEs/l79Yl1geCk/Jh7xGJo4ROI
HvSZPC4s4D7MPtXkV7VFwqAVl1betNAvTB13eIkmLrMHuDoh9EqBbG3CBvPeKY+l
I0eRp5uSGGIccdLFaTqmO+IHp6SiCj6xTshUme8TT5+UuDdDiducucDtNUSveYNI
ehRyuNR6Kw7vATnQHOqwnbHgAxA8mtzFjJVvd/C89C79B6D965+urN+tPhGoYBe0
R9zEhxKPdtsnE0KZfE2sNt7q9V59O7Nsl9Q2YjXY3q3t7xPeEyhDMnYrK7XJ3cRj
VRy0UkF233WKbmD8jne6p/BVw1nC/ktK8a/j6ZiXK61WhuJviv52LZIbhswq4/R/
ssI55ne0WkDS2VtmiNibGRP8tBuiajqmjMiE83o620Q5zHt4fA0fQN2SbBj5P441
CprhRCCxOLdczQIZWnZx8aYJuPYKbFaoVz+YCGZD9hN1TzKKO1K3eshVym/Jr6K4
Ez2CMJXVCycy5vlwOeQqIEEVsnZ43tvXS+O0wc9bFVP27JVXNmN0geU79S0acw8z
3XOP8LtlY37Uxz0O2cakygVL859WpDbTJe5ECi2L+m57XXXFOVqa1yIF8+/kG8+B
lB3dOwWjCiR1hwNHRxon8CWvCmUBaHRwYmCTmMpSRs53mHhyRpE=
=o1+b
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- LTO fix for clang when building with CONFIG_CMODEL_MEDLOW
- Fix for ACPI CPPC CSR read/write return values
- Several fixes for incorrect access widths in thread_info.cpu reads
- Fix an issue in __put_user_nocheck() that was causing the glibc
tst-socket-timestamp test to fail
- Initialize struct kexec_buf records in several kexec-related
functions, which were generating UBSAN warnings
- Two fixes for sparse warnings
* tag 'riscv-for-linus-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix sparse warning about different address spaces
riscv: Fix sparse warning in __get_user_error()
riscv: kexec: Initialize kexec_buf struct
riscv: use lw when reading int cpu in asm_per_cpu
riscv, bpf: use lw when reading int cpu in bpf_get_smp_processor_id
riscv, bpf: use lw when reading int cpu in BPF_MOV64_PERCPU_REG
riscv: uaccess: fix __put_user_nocheck for unaligned accesses
riscv: use lw when reading int cpu in new_vmalloc_check
ACPI: RISC-V: Fix FFH_CPPC_CSR error handling
riscv: Only allow LTO with CMODEL_MEDANY
On SoCFPGA/Sodia board, mdio bus cannot be probed, so the PHY cannot be
found and the network device does not work.
```
stmmaceth ff702000.ethernet eth0: __stmmac_open: Cannot attach to PHY (error: -19)
```
To probe the mdio bus, add "snps,dwmac-mdio" as compatible string of the
mdio bus. Also the PHY address connected to this board is 4. Therefore,
change to 4.
Cc: stable@vger.kernel.org # 6.3+
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
xs_sock_recv_cmsg was failing to call xs_sock_process_cmsg for any cmsg
type other than TLS_RECORD_TYPE_ALERT (TLS_RECORD_TYPE_DATA, and other
values not handled.) Based on my reading of the previous commit
(cc5d5908: sunrpc: fix client side handling of tls alerts), it looks
like only iov_iter_revert should be conditional on TLS_RECORD_TYPE_ALERT
(but that other cmsg types should still call xs_sock_process_cmsg). On
my machine, I was unable to connect (over mtls) to an NFS share hosted
on FreeBSD. With this patch applied, I am able to mount the share again.
Fixes: cc5d59081f ("sunrpc: fix client side handling of tls alerts")
Signed-off-by: Justin Worrell <jworrell@gmail.com>
Reviewed-and-tested-by: Scott Mayhew <smayhew@redhat.com>
Link: https://lore.kernel.org/r/20250904211038.12874-3-jworrell@gmail.com
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Since all callers of nfs_page_group_covers_page() have already ensured
that there is only one group member, all that is required is to check
that the entire folio contains dirty data.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If we're truncating part of the folio, then we need to write out the
data on the part that is not covered by the cancellation.
Fixes: d47992f86b ("mm: change invalidatepage prototype to accept length")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Ensure that all O_DIRECT reads and writes complete before copying a file
range, so that the destination is up to date.
Fixes: a5864c999d ("NFS: Do not serialise O_DIRECT reads and writes")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Ensure that all O_DIRECT reads and writes complete before cloning a file
range, so that both the source and destination are up to date.
Fixes: a5864c999d ("NFS: Do not serialise O_DIRECT reads and writes")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Ensure that all O_DIRECT reads and writes complete before calling
fallocate so that we don't race w.r.t. attribute updates.
Fixes: 99f2378322 ("NFSv4.2: Always flush out writes in nfs42_proc_fallocate()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Ensure that all O_DIRECT reads and writes are complete, and prevent the
initiation of new i/o until the setattr operation that will truncate the
file is complete.
Fixes: a5864c999d ("NFS: Do not serialise O_DIRECT reads and writes")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The NFSv4.2 copy offload and clone functions can also end up extending
the size of the destination file, so they too need to call
nfs_truncate_last_folio().
Reported-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This commit fixes the failing xfstest 'generic/363'.
When the user mmaps() an area that extends beyond the end of file, and
proceeds to write data into the folio that straddles that eof, we're
required to discard that folio data if the user calls some function that
extends the file length.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Recent commit f06bedfa62 ("pNFS/flexfiles: don't attempt pnfs on fatal DS
errors") has changed the error return type of ff_layout_choose_ds_for_read() from
NULL to an error pointer. However, not all code paths have been updated
to match the change. Thus, some non-NULL checks will accept error pointers
as a valid return value.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: f06bedfa62 ("pNFS/flexfiles: don't attempt pnfs on fatal DS errors")
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Previously nfs_local_probe() was made to disable and then attempt to
re-enable LOCALIO (via LOCALIO protocol handshake) if/when it was
called and LOCALIO already enabled.
Vague memory for _why_ this was the case is that this was useful
if/when a local NFS server were to be restarted with a local NFS
client connected to it.
But as it happens this causes an absurd amount of LOCALIO flapping
which has a side-effect of too much IO being needlessly sent to NFSD
(using RPC over the loopback network interface). This is the
definition of "serious performance loss" (that negates the point of
having LOCALIO).
So remove this mis-optimization for re-enabling LOCALIO if/when an NFS
server is restarted (which is an extremely rare thing to do). Will
revisit testing that scenario again but in the meantime this patch
restores the full benefit of LOCALIO.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Toolchain and infrastructure:
- Two changes to prepare for the future Rust 1.91.0 release (expected
2025-10-30, currently in nightly): a target specification format
change and a renamed, soon-to-be-stabilized 'core' function.
-----BEGIN PGP SIGNATURE-----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=j/MW
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
- Two changes to prepare for the future Rust 1.91.0 release (expected
2025-10-30, currently in nightly): a target specification format
change and a renamed, soon-to-be-stabilized 'core' function.
* tag 'rust-fixes-6.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: support Rust >= 1.91.0 target spec
rust: use the new name Location::file_as_c_str() in Rust >= 1.91.0
Support for MT6359 PMIC keys has been added recently. However, the key
release event is not properly handled: only key press events are
generated, leaving key states stuck in "pressed".
This patch ensures that both key press and key release events are
properly emitted by handling the release logic correctly.
Introduce a 'key_release_irq' member to the 'mtk_pmic_regs' to identify
the devices that have a separate irq for the release event.
Fixes: bc25e6bf03 ("Input: mtk-pmic-keys - add support for MT6359 PMIC keys")
Signed-off-by: Julien Massot <julien.massot@collabora.com>
Link: https://lore.kernel.org/r/20250905-radxa-nio-12-l-gpio-v3-1-40f11377fb55@collabora.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
A crash was observed with the following output:
BUG: kernel NULL pointer dereference, address: 0000000000000010
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 2 UID: 0 PID: 92 Comm: osnoise_cpus Not tainted 6.17.0-rc4-00201-gd69eb204c255 #138 PREEMPT(voluntary)
RIP: 0010:bitmap_parselist+0x53/0x3e0
Call Trace:
<TASK>
osnoise_cpus_write+0x7a/0x190
vfs_write+0xf8/0x410
? do_sys_openat2+0x88/0xd0
ksys_write+0x60/0xd0
do_syscall_64+0xa4/0x260
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
This issue can be reproduced by below code:
fd=open("/sys/kernel/debug/tracing/osnoise/cpus", O_WRONLY);
write(fd, "0-2", 0);
When user pass 'count=0' to osnoise_cpus_write(), kmalloc() will return
ZERO_SIZE_PTR (16) and cpulist_parse() treat it as a normal value, which
trigger the null pointer dereference. Add check for the parameter 'count'.
Cc: <mhiramat@kernel.org>
Cc: <mathieu.desnoyers@efficios.com>
Cc: <tglozar@redhat.com>
Link: https://lore.kernel.org/20250906035610.3880282-1-wangliang74@huawei.com
Fixes: 17f89102fe ("tracing/osnoise: Allow arbitrarily long CPU string")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit edede7a6dc ("trace/fgraph: Fix the warning caused by missing
unregister notifier") added a call to unregister the PM notifier if
register_ftrace_graph() failed. It does so unconditionally. However,
the PM notifier is only registered with the first call to
register_ftrace_graph(). If the first registration was successful and
a subsequent registration failed, the notifier is now unregistered even
if ftrace graphs are still registered.
Fix the problem by only unregistering the PM notifier during error handling
if there are no active fgraph registrations.
Fixes: edede7a6dc ("trace/fgraph: Fix the warning caused by missing unregister notifier")
Closes: https://lore.kernel.org/all/63b0ba5a-a928-438e-84f9-93028dd72e54@roeck-us.net/
Cc: Ye Weihua <yeweihua4@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250906050618.2634078-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Current implementation uses `CDNS_UART_REGISTER_SPACE(0x1000)`
for request_mem_region() and ioremap() in cdns_uart_request_port() API.
The cadence/xilinx IP has register space defined from offset 0x0 to 0x48.
It also mentions that the register map is defined as [6:0]. So, the upper
region may/maynot be used based on the IP integration.
In Axiado AX3000 SoC two UART instances are defined
0x100 apart. That is creating issue in some other instance due to overlap
with addresses.
Since, this address space is already being defined in the
devicetree, use the same when requesting the register space.
Fixes: 1f70557790 ("arm64: dts: axiado: Add initial support for AX3000 SoC and eval board")
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Harshit Shah <hshah@axiado.com>
Link: https://lore.kernel.org/r/20250902-xilinx-uartps-reg-size-v3-1-d11cfa7258e3@axiado.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The EP-IN of MIDI2 (altset 1) wasn't initialized in
f_midi2_create_usb_configs() as it's an INT EP unlike others BULK
EPs. But this leaves rather the max packet size unchanged no matter
which speed is used, resulting in the very slow access.
And the wMaxPacketSize values set there look legit for INT EPs, so
let's initialize the MIDI2 EP-IN there for achieving the equivalent
speed as well.
Fixes: 8b645922b2 ("usb: gadget: Add support for USB MIDI 2.0 function driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20250905133240.20966-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gadget card driver forgot to call snd_ump_update_group_attrs()
after adding FBs, and this leaves the UMP group attributes
uninitialized. As a result, -ENODEV error is returned at opening a
legacy rawmidi device as an inactive group.
This patch adds the missing call to address the behavior above.
Fixes: 8b645922b2 ("usb: gadget: Add support for USB MIDI 2.0 function driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20250904153932.13589-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tcpm_handle_vdm_request delivers messages to the partner altmode or the
cable altmode depending on the SVDM response type, which is incorrect.
The partner or cable should be chosen based on the received message type
instead.
Also add this filter to ADEV_NOTIFY_USB_AND_QUEUE_VDM, which is used when
the Enter Mode command is responded to by a NAK on SOP or SOP' and when
the Exit Mode command is responded to by an ACK on SOP.
Fixes: 7e7877c55e ("usb: typec: tcpm: add alt mode enter/exit/vdm support for sop'")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250821203759.1720841-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yunseong Kim and the syzbot fuzzer both reported a problem in
RT-enabled kernels caused by the way dummy-hcd mixes interrupt
management and spin-locking. The pattern was:
local_irq_save(flags);
spin_lock(&dum->lock);
...
spin_unlock(&dum->lock);
... // calls usb_gadget_giveback_request()
local_irq_restore(flags);
The code was written this way because usb_gadget_giveback_request()
needs to be called with interrupts disabled and the private lock not
held.
While this pattern works fine in non-RT kernels, it's not good when RT
is enabled. RT kernels handle spinlocks much like mutexes; in particular,
spin_lock() may sleep. But sleeping is not allowed while local
interrupts are disabled.
To fix the problem, rewrite the code to conform to the pattern used
elsewhere in dummy-hcd and other UDC drivers:
spin_lock_irqsave(&dum->lock, flags);
...
spin_unlock(&dum->lock);
usb_gadget_giveback_request(...);
spin_lock(&dum->lock);
...
spin_unlock_irqrestore(&dum->lock, flags);
This approach satisfies the RT requirements.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Fixes: b4dbda1a22 ("USB: dummy-hcd: disable interrupts during req->complete")
Reported-by: Yunseong Kim <ysk@kzalloc.com>
Closes: <https://lore.kernel.org/linux-usb/5b337389-73b9-4ee4-a83e-7e82bf5af87a@kzalloc.com/>
Reported-by: syzbot+8baacc4139f12fa77909@syzkaller.appspotmail.com
Closes: <https://lore.kernel.org/linux-usb/68ac2411.050a0220.37038e.0087.GAE@google.com/>
Tested-by: syzbot+8baacc4139f12fa77909@syzkaller.appspotmail.com
CC: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
CC: stable@vger.kernel.org
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/bb192ae2-4eee-48ee-981f-3efdbbd0d8f0@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suspend-resume cycle test revealed a memory leak in 6.17-rc3
Turns out the slot_id race fix changes accidentally ends up calling
xhci_free_virt_device() with an incorrect vdev parameter.
The vdev variable was reused for temporary purposes right before calling
xhci_free_virt_device().
Fix this by passing the correct vdev parameter.
The slot_id race fix that caused this regression was targeted for stable,
so this needs to be applied there as well.
Fixes: 2eb0337615 ("usb: xhci: Fix slot_id resource race conflict")
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/linux-usb/20250829181354.4450-1-00107082@163.com
Suggested-by: Michal Pecio <michal.pecio@gmail.com>
Suggested-by: David Wang <00107082@163.com>
Cc: stable@vger.kernel.org
Tested-by: David Wang <00107082@163.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pending requests will be flushed on disconnect, and the corresponding
TRBs will be turned into No-op TRBs, which are ignored by the xHC
controller once it starts processing the ring.
If the USB debug cable repeatedly disconnects before ring is started
then the ring will eventually be filled with No-op TRBs.
No new transfers can be queued when the ring is full, and driver will
print the following error message:
"xhci_hcd 0000:00:14.0: failed to queue trbs"
This is a normal case for 'in' transfers where TRBs are always enqueued
in advance, ready to take on incoming data. If no data arrives, and
device is disconnected, then ring dequeue will remain at beginning of
the ring while enqueue points to first free TRB after last cancelled
No-op TRB.
s
Solve this by reinitializing the rings when the debug cable disconnects
and DbC is leaving the configured state.
Clear the whole ring buffer and set enqueue and dequeue to the beginning
of ring, and set cycle bit to its initial state.
Cc: stable@vger.kernel.org
Fixes: dfba2174dc ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Decouple allocation of endpoint ring buffer from initialization
of the buffer, and initialization of endpoint context parts from
from the rest of the contexts.
It allows driver to clear up and reinitialize endpoint rings
after disconnect without reallocating everything.
This is a prerequisite for the next patch that prevents the transfer
ring from filling up with cancelled (no-op) TRBs if a debug cable is
reconnected several times without transferring anything.
Cc: stable@vger.kernel.org
Fixes: dfba2174dc ("usb: xhci: Add DbC support in xHCI driver")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250902105306.877476-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- i801: fix device IDs
- in rtl9300:
- fix channel number check in probe
- check data length boundaries in xfer
- drop unsupported SMBus quick operation
-----BEGIN PGP SIGNATURE-----
iIwEABYKADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCaLuKDhYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1uWmkA/jMAbFFw08uYemeR7iM8rEfVHP1y
gsGZ5QUoXnBx5YlDAP4qOQ7YUJaquMwg+/USrXlAcVWI4AvVnhJacFoB5m4BBg==
=5bas
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-fixes-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.17-rc5
- i801: fix device IDs
- in rtl9300:
- fix channel number check in probe
- check data length boundaries in xfer
- drop unsupported SMBus quick operation
Problem description
===================
Lockdep reports a possible circular locking dependency (AB/BA) between
&pl->state_mutex and &phy->lock, as follows.
phylink_resolve() // acquires &pl->state_mutex
-> phylink_major_config()
-> phy_config_inband() // acquires &pl->phydev->lock
whereas all the other call sites where &pl->state_mutex and
&pl->phydev->lock have the locking scheme reversed. Everywhere else,
&pl->phydev->lock is acquired at the top level, and &pl->state_mutex at
the lower level. A clear example is phylink_bringup_phy().
The outlier is the newly introduced phy_config_inband() and the existing
lock order is the correct one. To understand why it cannot be the other
way around, it is sufficient to consider phylink_phy_change(), phylink's
callback from the PHY device's phy->phy_link_change() virtual method,
invoked by the PHY state machine.
phy_link_up() and phy_link_down(), the (indirect) callers of
phylink_phy_change(), are called with &phydev->lock acquired.
Then phylink_phy_change() acquires its own &pl->state_mutex, to
serialize changes made to its pl->phy_state and pl->link_config.
So all other instances of &pl->state_mutex and &phydev->lock must be
consistent with this order.
Problem impact
==============
I think the kernel runs a serious deadlock risk if an existing
phylink_resolve() thread, which results in a phy_config_inband() call,
is concurrent with a phy_link_up() or phy_link_down() call, which will
deadlock on &pl->state_mutex in phylink_phy_change(). Practically
speaking, the impact may be limited by the slow speed of the medium
auto-negotiation protocol, which makes it unlikely for the current state
to still be unresolved when a new one is detected, but I think the
problem is there. Nonetheless, the problem was discovered using lockdep.
Proposed solution
=================
Practically speaking, the phy_config_inband() requirement of having
phydev->lock acquired must transfer to the caller (phylink is the only
caller). There, it must bubble up until immediately before
&pl->state_mutex is acquired, for the cases where that takes place.
Solution details, considerations, notes
=======================================
This is the phy_config_inband() call graph:
sfp_upstream_ops :: connect_phy()
|
v
phylink_sfp_connect_phy()
|
v
phylink_sfp_config_phy()
|
| sfp_upstream_ops :: module_insert()
| |
| v
| phylink_sfp_module_insert()
| |
| | sfp_upstream_ops :: module_start()
| | |
| | v
| | phylink_sfp_module_start()
| | |
| v v
| phylink_sfp_config_optical()
phylink_start() | |
| phylink_resume() v v
| | phylink_sfp_set_config()
| | |
v v v
phylink_mac_initial_config()
| phylink_resolve()
| | phylink_ethtool_ksettings_set()
v v v
phylink_major_config()
|
v
phy_config_inband()
phylink_major_config() caller #1, phylink_mac_initial_config(), does not
acquire &pl->state_mutex nor do its callers. It must acquire
&pl->phydev->lock prior to calling phylink_major_config().
phylink_major_config() caller #2, phylink_resolve() acquires
&pl->state_mutex, thus also needs to acquire &pl->phydev->lock.
phylink_major_config() caller #3, phylink_ethtool_ksettings_set(), is
completely uninteresting, because it only calls phylink_major_config()
if pl->phydev is NULL (otherwise it calls phy_ethtool_ksettings_set()).
We need to change nothing there.
Other solutions
===============
The lock inversion between &pl->state_mutex and &pl->phydev->lock has
occurred at least once before, as seen in commit c718af2d00 ("net:
phylink: fix ethtool -A with attached PHYs"). The solution there was to
simply not call phy_set_asym_pause() under the &pl->state_mutex. That
cannot be extended to our case though, where the phy_config_inband()
call is much deeper inside the &pl->state_mutex section.
Fixes: 5fd0f1a02e ("net: phylink: add negotiation of in-band capabilities")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250904125238.193990-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently phylink_resolve() protects itself against concurrent
phylink_bringup_phy() or phylink_disconnect_phy() calls which modify
pl->phydev by relying on pl->state_mutex.
The problem is that in phylink_resolve(), pl->state_mutex is in a lock
inversion state with pl->phydev->lock. So pl->phydev->lock needs to be
acquired prior to pl->state_mutex. But that requires dereferencing
pl->phydev in the first place, and without pl->state_mutex, that is
racy.
Hence the reason for the extra lock. Currently it is redundant, but it
will serve a functional purpose once mutex_lock(&phy->lock) will be
moved outside of the mutex_lock(&pl->state_mutex) section.
Another alternative considered would have been to let phylink_resolve()
acquire the rtnl_mutex, which is also held when phylink_bringup_phy()
and phylink_disconnect_phy() are called. But since phylink_disconnect_phy()
runs under rtnl_lock(), it would deadlock with phylink_resolve() when
calling flush_work(&pl->resolve). Additionally, it would have been
undesirable because it would have unnecessarily blocked many other call
paths as well in the entire kernel, so the smaller-scoped lock was
preferred.
Link: https://lore.kernel.org/netdev/aLb6puGVzR29GpPx@shell.armlinux.org.uk/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250904125238.193990-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function of_phy_find_device may return NULL, so we need to take
care before dereferencing phy_dev.
Fixes: 64a632da53 ("net: fec: Fix phy_device lookup for phy_reset_after_clk_enable()")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Richard Leitner <richard.leitner@skidata.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250904091334.53965-1-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are fuel gauges in the bq27xxx series (e.g. bq27z561) which may in some
cases report 0xff as the value of BQ27XXX_REG_FLAGS that should not be
interpreted as "no battery" like for a disconnected battery with some built
in bq27000 chip.
So restrict the no-battery detection originally introduced by
commit 3dd843e1c2 ("bq27000: report missing device better.")
to the bq27000.
There is no need to backport further because this was hidden before
commit f16d9fb6cf ("power: supply: bq27xxx: Retrieve again when busy")
Fixes: f16d9fb6cf ("power: supply: bq27xxx: Retrieve again when busy")
Suggested-by: Jerry Lv <Jerry.Lv@axis.com>
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/dd979fa6855fd051ee5117016c58daaa05966e24.1755945297.git.hns@goldelico.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Since commit
commit f16d9fb6cf ("power: supply: bq27xxx: Retrieve again when busy")
the console log of some devices with hdq enabled but no bq27000 battery
(like e.g. the Pandaboard) is flooded with messages like:
[ 34.247833] power_supply bq27000-battery: driver failed to report 'status' property: -1
as soon as user-space is finding a /sys entry and trying to read the
"status" property.
It turns out that the offending commit changes the logic to now return the
value of cache.flags if it is <0. This is likely under the assumption that
it is an error number. In normal errors from bq27xxx_read() this is indeed
the case.
But there is special code to detect if no bq27000 is installed or accessible
through hdq/1wire and wants to report this. In that case, the cache.flags
are set historically by
commit 3dd843e1c2 ("bq27000: report missing device better.")
to constant -1 which did make reading properties return -ENODEV. So everything
appeared to be fine before the return value was passed upwards.
Now the -1 is returned as -EPERM instead of -ENODEV, triggering the error
condition in power_supply_format_property() which then floods the console log.
So we change the detection of missing bq27000 battery to simply set
cache.flags = -ENODEV
instead of -1.
Fixes: f16d9fb6cf ("power: supply: bq27xxx: Retrieve again when busy")
Cc: Jerry Lv <Jerry.Lv@axis.com>
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Link: https://lore.kernel.org/r/692f79eb6fd541adb397038ea6e750d4de2deddf.1755945297.git.hns@goldelico.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
In my_tramp1 function .size directive was placed above
ASM_RET instruction, leading to a wrong function size.
Link: https://lore.kernel.org/aK3d7vxNcO52kEmg@vova-pc
Fixes: 9d907f1ae8 ("samples/ftrace: Fix asm function ELF annotations")
Signed-off-by: Vladimir Riabchun <ferr.lambarginio@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
This series contains fixes for use-after-free resulted in segfaults
after merging the bpf tree. Also a couple of build and test fixes.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCaLtFZAAKCRCMstVUGiXM
g7OFAP9F6M4Cpri9cxmbDyr188w85n+l6QC/Rjabardgn6NoEAEAovtNCO/0jEQ0
pUpYgMX3OCn+ARZGOR6vuJTSIlzj8gg=
=G7Fh
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.17-2025-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"Fixes for use-after-free that resulted in segfaults after merging the
bpf tree.
Also a couple of build and test fixes"
* tag 'perf-tools-fixes-for-v6.17-2025-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf symbol-elf: Add support for the block argument for libbfd
perf test: Checking BPF metadata collection fails on version string
perf tests: Fix "PE file support" test build
perf bpf-utils: Harden get_bpf_prog_info_linear
perf bpf-utils: Constify bpil_array_desc
perf bpf-event: Fix use-after-free in synthesis
We did not propagate the __user attribute of the pointers in
__get_kernel_nofault() and __put_kernel_nofault(), which results in
sparse complaining:
>> mm/maccess.c:41:17: sparse: sparse: incorrect type in argument 2 (different address spaces) @@ expected void const [noderef] __user *from @@ got unsigned long long [usertype] * @@
mm/maccess.c:41:17: sparse: expected void const [noderef] __user *from
mm/maccess.c:41:17: sparse: got unsigned long long [usertype] *
So fix this by correctly casting those pointers.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202508161713.RWu30Lv1-lkp@intel.com/
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: f6bff7827a ("riscv: uaccess: use 'asm_goto_output' for get_user()")
Cc: stable@vger.kernel.org
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Cyril Bur <cyrilbur@tenstorrent.com>
Link: https://lore.kernel.org/r/20250903-dev-alex-sparse_warnings_v1-v1-2-7e6350beb700@rivosinc.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The kexec_buf structure was previously declared without initialization.
commit bf454ec31a ("kexec_file: allow to place kexec_buf randomly")
added a field that is always read but not consistently populated by all
architectures. This un-initialized field will contain garbage.
This is also triggering a UBSAN warning when the uninitialized data was
accessed:
------------[ cut here ]------------
UBSAN: invalid-load in ./include/linux/kexec.h:210:10
load of value 252 is not a valid value for type '_Bool'
Zero-initializing kexec_buf at declaration ensures all fields are
cleanly set, preventing future instances of uninitialized memory being
used.
Fixes: bf454ec31a ("kexec_file: allow to place kexec_buf randomly")
Signed-off-by: Breno Leitao <leitao@debian.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250827-kbuf_all-v1-2-1df9882bb01a@debian.org
Signed-off-by: Paul Walmsley <pjw@kernel.org>
