Add DMA support for spicc driver.
DMA works if the transfer meets the following conditions:
1. 64 bits per word;
2. The transfer length must be multiples of the dma_burst_len,
and the dma_burst_len should be one of 8,7...2,
otherwise, it will be split into several SPI bursts.
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://patch.msgid.link/20250414-spi-dma-v2-1-84bbd92fa469@amlogic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a VNI is deleted from a VXLAN device in 'vnifilter' mode, the FDB
entry associated with the default remote (assuming one was configured)
is deleted without holding the hash lock. This is wrong and will result
in a warning [1] being generated by the lockdep annotation that was
added by commit ebe6420674 ("vxlan: Create wrappers for FDB lookup").
Reproducer:
# ip link add vx0 up type vxlan dstport 4789 external vnifilter local 192.0.2.1
# bridge vni add vni 10010 remote 198.51.100.1 dev vx0
# bridge vni del vni 10010 dev vx0
Fix by acquiring the hash lock before the deletion and releasing it
afterwards. Blame the original commit that introduced the issue rather
than the one that exposed it.
[1]
WARNING: CPU: 3 PID: 392 at drivers/net/vxlan/vxlan_core.c:417 vxlan_find_mac+0x17f/0x1a0
[...]
RIP: 0010:vxlan_find_mac+0x17f/0x1a0
[...]
Call Trace:
<TASK>
__vxlan_fdb_delete+0xbe/0x560
vxlan_vni_delete_group+0x2ba/0x940
vxlan_vni_del.isra.0+0x15f/0x580
vxlan_process_vni_filter+0x38b/0x7b0
vxlan_vnifilter_process+0x3bb/0x510
rtnetlink_rcv_msg+0x2f7/0xb70
netlink_rcv_skb+0x131/0x360
netlink_unicast+0x426/0x710
netlink_sendmsg+0x75a/0xc20
__sock_sendmsg+0xc1/0x150
____sys_sendmsg+0x5aa/0x7b0
___sys_sendmsg+0xfc/0x180
__sys_sendmsg+0x121/0x1b0
do_syscall_64+0xbb/0x1d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Fixes: f9c4bb0b24 ("vxlan: vni filtering support on collect metadata device")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250423145131.513029-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* iwlwifi: various regression and iwlmld fixes
* mac80211: fix TX frames in monitor mode
* brcmfmac: error handling for firmware load
-----BEGIN PGP SIGNATURE-----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=c/97
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-04-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Some more fixes, notably:
* iwlwifi: various regression and iwlmld fixes
* mac80211: fix TX frames in monitor mode
* brcmfmac: error handling for firmware load
* tag 'wireless-2025-04-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: restore missing initialization of async_handlers_list
wifi: brcm80211: fmac: Add error handling for brcmf_usb_dl_writeimage()
wifi: plfxlc: Remove erroneous assert in plfxlc_mac_release
wifi: iwlwifi: fix the check for the SCRATCH register upon resume
wifi: iwlwifi: don't warn if the NIC is gone in resume
wifi: iwlwifi: mld: fix BAID validity check
wifi: iwlwifi: back off on continuous errors
wifi: iwlwifi: mld: only create debugfs symlink if it does not exist
wifi: iwlwifi: mld: inform trans on init failure
wifi: iwlwifi: mld: properly handle async notification in op mode start
Revert "wifi: iwlwifi: make no_160 more generic"
Revert "wifi: iwlwifi: add support for BE213"
wifi: mac80211: restore monitor for outgoing frames
====================
Link: https://patch.msgid.link/20250424120535.56499-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Single fix for broken usage of 'multi-MIDR' infrastructure in PI
code, adding an open-coded erratum check for Cavium ThunderX
* Bugfixes from a planned posted interrupt rework
* Do not use kvm_rip_read() unconditionally to cater for guests
with inaccessible register state.
- Single fix for broken usage of 'multi-MIDR' infrastructure in PI
code, adding an open-coded erratum check for everyone's favorite pile
of sand: Cavium ThunderX
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCaAK8pxccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFsJdAQDPLe/PQ05H5P/dIdZtjMb127OH
gLWOb2PsvpJ747pjQQD9EkFRqJmiUioxRtvLP8/63fzhQ1/OCwtEUsA3jfLtOgI=
=42YY
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.15-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.15, round #2
- Single fix for broken usage of 'multi-MIDR' infrastructure in PI
code, adding an open-coded erratum check for everyone's favorite pile
of sand: Cavium ThunderX
When memory allocation profiling is disabled at runtime or due to an
error, shutdown_mem_profiling() is called: slab->obj_exts which
previously allocated remains.
It won't be cleared by unaccount_slab() because of
mem_alloc_profiling_enabled() not true. It's incorrect, slab->obj_exts
should always be cleaned up in unaccount_slab() to avoid following error:
[...]BUG: Bad page state in process...
..
[...]page dumped because: page still charged to cgroup
[andriy.shevchenko@linux.intel.com: fold need_slab_obj_ext() into its only user]
Fixes: 21c690a349 ("mm: introduce slabobj_ext to support slab object extensions")
Cc: stable@vger.kernel.org
Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Tested-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Link: https://patch.msgid.link/20250421075232.2165527-1-quic_zhenhuah@quicinc.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
A previous commit added a 'sync' parameter to io_fallback_tw(), which if
true, means the caller wants to wait on the fallback thread handling it.
But the logic is somewhat messed up, ensure that ctxs are swapped and
flushed appropriately.
Cc: stable@vger.kernel.org
Fixes: dfbe5561ae ("io_uring: flush offloaded and delayed task_work on exit")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The GNU coreutils version of truncate, which is the original, accepts a
% prefix for the -s size argument which means the file in question
should be padded to a multiple of the given size. This is currently used
to pad the setup block of bzImage to a multiple of 4k before appending
the decompressor.
busybox reimplements truncate but does not support this idiom, and
therefore fails the build since commit
9c54baab44 ("x86/boot: Drop CRC-32 checksum and the build tool that generates it")
Since very little build code within the kernel depends on the 'truncate'
utility, work around this incompatibility by avoiding truncate altogether,
and relying on dd to perform the padding.
Fixes: 9c54baab44 ("x86/boot: Drop CRC-32 checksum and the build tool that generates it")
Reported-by: <phasta@kernel.org>
Tested-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250424101917.1552527-2-ardb+git@google.com
While the building system doesn't create any Python JIT bytecode,
if one manually runs kernel-doc.py or get_abi.py, Python will,
by default, create a bytecode and store it under scripts/lib/*.
This is normal, and not controlled by the Kernel itself. So,
add *.pyc as an extension to be ignored.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <ae1c54ddacf6ded1f7154897b10798d4b3fdaf96.1745453655.git.mchehab+huawei@kernel.org>
As reported by Andy, kernel-doc.py is creating a __pycache__
directory at build time.
Disable creation of __pycache__ for the libraries used by
kernel-doc.py, when excecuted via the build system or via
scripts/find-unused-docs.sh.
Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Closes: https://lore.kernel.org/linux-doc/Z_zYXAJcTD-c3xTe@black.fi.intel.com/
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <158b962ed7cd104f7bbfe69f499ec1cc378864db.1745453655.git.mchehab+huawei@kernel.org>
As kernel-doc script is used not only on Documentation, but
also on scripts and drivers/drm Makefiles, move it to the
main makefile, as otherwise sub-makefiles may not have it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <bb3ea3b49e76aee51dae7762db10c4d38cd67afe.1745453655.git.mchehab+huawei@kernel.org>
Despite its name, what's there is a set of Sphinx arguments that
are passed to sphinx/kerneldoc.py:
- kerneldoc_srctree: location of the source tree;
- kerneldoc_bin: external script to excecute kernel-doc
Drop it, and just place the values at the already-existing
ALLSPHINXOPTS variable.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <88be0fc288598c30fbedb9cc230b2a7ed28225a2.1745453655.git.mchehab+huawei@kernel.org>
- Revert acomp multibuffer tests which were buggy.
- Fix off-by-one regression in new scomp code.
- Lower quality setting on atmel-sha204a as it may not be random.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmgIRY8ACgkQxycdCkmx
i6eOuxAAqgI+HFdH5hpZoU2in0bfFty/uwl6D7MdQ+IX8kpAZDqt5ctq5VaWKySo
E+yfXcLBb136WGlhUbQUMkByL+qXY8BnTyuN86/0tnApwOhalfdBKu4/dezB/lYV
t/qbSFc7KHjgoSl1Yo1yyoQsL2w4o77BXKLuf56zy6CyJbJPLHODY59j3fza02T3
e0GWnEGk+S2LFHZrK9bEN40sIvG4xfLJbvQydAnPWSeT04+n6kx+CjpCDmMx/Wxn
WdUzm10Z9u5TydFw8YfNgUlfi5QinqnvdC2fN2mTY5fR3P7V0yuyDzbBLQlqf5Tn
o+FuDTZ6+h4t/FklHmw+PbwNasxheaGMAXV6ZEDoW0+CTAA37iDgJkEJIcwldWog
1jcji7JHTkgdRHfXPHGZTAiW/z49UXn/5tD8ZbzrWr/xhpYhtvAZfyKMKE9w9xYk
fmSwhSiB6i5gDrsZIx8AYHyvA8Zhy+lzdpKRWTO5V2Q2LLH1DkA9afX7hLPwLeju
tdkeNXO5kQzZ3iA/2S5jPHhIO4LVtw/y/Q7m3JlTGhVJxlup+Zn+GkINJxyvp2a/
Lndq6W3QoJ45ItKg53t007QNeO2WHCFLTiYFVQpJtwKljx+/siitIxDSHgZpiFOj
KsX/Qw/laUVKC5EaH6ICd/PZMP3fWWgpink1p4arQxz1sYIJy5U=
=STVd
-----END PGP SIGNATURE-----
Merge tag 'v6.15-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Revert acomp multibuffer tests which were buggy
- Fix off-by-one regression in new scomp code
- Lower quality setting on atmel-sha204a as it may not be random
* tag 'v6.15-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: atmel-sha204a - Set hwrng quality to lowest possible
crypto: scomp - Fix off-by-one bug when calculating last page
Revert "crypto: testmgr - Add multibuffer acomp testing"
Merge the immutable branch dt into next, to allow the DT bindings to be
tested together with changes that are targeted for v6.16.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The version in the sysfs attribute should correspond to the version in
which this is enabled and visible for end users. It usually doesn't
correspond to the version in which the patch was developed, but rather a
release that will contain it. Update them to 6.16.
Fixes: 28f79ac609 ("drm/xe/hwmon: expose fan speed")
Reported-by: Ulisses Furquim <ulisses.furquim@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4841
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250421-hwmon-doc-fix-v1-2-9f68db702249@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The version in the sysfs attribute should correspond to the version in
which this is enabled and visible for end users. It usually doesn't
correspond to the version in which the patch was developed, but rather a
release that will contain it. Update them to 6.15.
Fixes: dac328dea7 ("drm/xe/hwmon: expose package and vram temperature")
Reported-by: Ulisses Furquim <ulisses.furquim@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4840
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://lore.kernel.org/r/20250421-hwmon-doc-fix-v1-1-9f68db702249@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The Allwinner Power Reset Clock Management (RPCM) block contains a few
bits that control some power domains. The most prominent one is the one
for the Mali GPU. On the Allwinner H6 this domain is enabled at reset, so
we didn't care about it so far, but the H616 defaults to it being disabled.
Add a power domain driver for those bits. Some BSP code snippets and
some spare documentation describe three bits, slightly different between
the H6 and H616, so add three power domains for each SoC, connected to
their compatible string.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20250416224839.9840-3-andre.przywara@arm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the immutable branch dt into next, to allow the DT bindings to be
tested together with changes that are targeted for v6.16.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The tool of Smatch static checker reported the following warning:
drivers/edac/i10nm_base.c:364 show_retry_rd_err_log()
warn: should bitwise negate be 'ullong'?
This warning was due to the bitwise NOT/AND operations between
'status_mask' (a u32 type) and 'log' (a u64 type), which resulted in
the high 32 bits of 'log' were cleared.
This was a false positive warning, as only the low 32 bits of 'log' was
written to the first RRL memory controller register (a u32 type).
To improve code sanity, fix this warning by changing 'status_mask' to
a u64 type, ensuring it matches the size of 'log' for bitwise operations.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aAih0KmEVq7ch6v2@stanley.mountain/
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20250424081454.2952632-1-qiuxu.zhuo@intel.com
This commits breaks SNP guests:
234cf67fc3 ("x86/sev: Split off startup code from core code")
The SNP guest boots, but no longer has access to the VMPCK keys needed
to communicate with the ASP, which is used, for example, to obtain an
attestation report.
The secrets_pa value is defined as static in both startup.c and
core.c. It is set by a function in startup.c and so when used in
core.c its value will be 0.
Share it again and add the sev_ prefix to put it into the global
SEV symbols namespace.
[ mingo: Renamed to sev_secrets_pa ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Link: https://lore.kernel.org/r/cf878810-81ed-3017-52c6-ce6aa41b5f01@amd.com
Even though the kernel's coding-style document does not explicitly
state this, we generally put a newline after the semicolon of every
C language statement to enhance code readability.
Adjust the placement of newlines to adhere to this convention.
Reported-by: Chen Linxuan <chenlinxuan@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Link: https://lore.kernel.org/r/DB66473733449DB0+20250423030632.17626-1-wangyuli@uniontech.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Rewrite the textual description for the WonderMedia PWM controller
as YAML schema, and switch the filename to follow the compatible
string.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250418-via_pwm_binding-v2-1-17545f4d719e@gmail.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Add a compatible string for the Display Controller PWM IP found in
the MediaTek Dimensity 1200 (MT6893) SoC, which is compatible with
the one found in MT8183.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250416120253.147977-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Add Return and (where interesting) Context sections, fix some formatting
and drop documenting the internal function __pwm_apply().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250417181611.2693599-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Exclude code that relies on sock_cgroup_classid() as preparation of
removal of the function.
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The xt_group matching supports the default hierarchy since commit
c38c4597e4 ("netfilter: implement xt_cgroup cgroup2 path match").
The cgroup v1 matching (based on clsid) and cgroup v2 matching (based on
path) are rather independent. Downgrade the Kconfig dependency to
mere CONFIG_SOCK_GROUP_DATA so that xt_group can be built even without
CONFIG_NET_CLS_CGROUP for path matching.
Also add a message for users when they attempt to specify any clsid.
Link: https://lists.opensuse.org/archives/list/kernel@lists.opensuse.org/thread/S23NOILB7MUIRHSKPBOQKJHVSK26GP6X/
Cc: Jan Engelhardt <ej@inai.de>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies to avoid the multiplication.
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies(E * 1000)
+secs_to_jiffies(E)
-msecs_to_jiffies(E * MSEC_PER_SEC)
+secs_to_jiffies(E)
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The ROHM BD96806 is from the software perspective almost identical to
the ROHM BD96802. The main difference is different voltage tuning
ranges.
Add support differentiating these PMICs and provide correct voltages
for both models.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/5d15660e0e71c70fda8df1694bec0e4fba7f251e.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ROHM BD96806 is from the software perspective almost identical to
the ROHM BD96802. The main difference is different voltage tuning
ranges. Add support differentiating these PMICs based on the compatible,
and invoking the regulator driver with correct IC type.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/ccc95ae33613648fdcba08915777d945412ac5c4.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ROHM BD96805 is from the software perspective almost identical to
the ROHM BD96801. The main difference is different voltage tuning
ranges.
Add support differentiating these PMICs and provide correct voltages
for both models.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/eab1369557b14a9762c41a5429d1ac87a4644d9e.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ROHM BD96805 is from the software perspective almost identical to
the ROHM BD96801. The main difference is different voltage tuning
ranges. Add support differentiating these PMICs based on the compatible,
and invoking the regulator driver with correct IC type.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/8680097dc083f191bea56d3ac7c6fe5c005644ec.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ROHM BD96802 PMIC is primarily intended to be used as a companion
PMIC extending the capabilities of the BD96802 but it can be used on
it's own as well. When used as a companion PMIC, the start-up and
shut-down sequences are usually intitiated by the master PMIC using IF
pins.
The BD96802 looks from the digital interface point of view pretty much
like a reduced version of BD96801. It includes only 2 BUCKs and provides
the same error protection/detection mechanisms as the BD96801. Also, the
voltage control logic is same up to the register addresses.
Add support for controlling BD96802 using the BD96801 driver.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/2fb2d0d4997c32d18bfa32cea4564352c00eebc8.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The ROHM BD96802 PMIC looks from software point of view a lot like ROHM
BD96801 PMIC. Just with reduced number of voltage rails. Both PMICs
provide two physical IRQ lines referred as INTB and ERRB and contain
blocks implementing regulator controls and a weatchdog. Hence it makes
sense to use same MFD core for both PMICs.
Add support for ROHM BD96802 scalable companion PMIC to the BD96801
core driver.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/05957d194425a79a4f35f287695c3d9ca2ed1ae2.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The resources generated in the BD96801 MFD driver are only visible to
the sub-drivers whose resource fields they are added. This makes
abbreviating the resource name with the IC name pointless. It just adds
confusion in those sub-drivers which do not really care the exact model
that generates the IRQ but just want to know the purpose IRQ was
generated for. Thus, as a preparatory fix to simplify adding support for
ROHM BD96802 PMIC the IC name "bd96801-" prefix was dropped from the IRQ
resource names. Adapt the regulator driver to this change.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/73ec2425655ab19c9f0cf990419641ad36561590.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The resources generated in the BD96801 MFD driver are only visible to
the sub-drivers whose resource fields they are added. This makes
abbreviating the resource name with the IC name pointless. It just adds
confusion in those sub-drivers which do not really care the exact model
that generates the IRQ but just want to know the purpose IRQ was
generated for. This is a preparatory fix to simplify adding support for
ROHM BD96802 PMIC.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/0b39a793d925651b1ec2d78e92d47a24849d216b.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Prepare for adding support for BD96802 which is very similar to BD96801.
Separate chip specific data into own structure which can be picked based
on the type of the IC.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/826f9aa28795a2aa70ea41a3688ff9a83ec25a98.1744090658.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Not all VMs allow access to RIP. Check guest_state_protected before
calling kvm_rip_read().
This avoids, for example, hitting WARN_ON_ONCE in vt_cache_reg() for
TDX VMs.
Fixes: 81bf912b2c ("KVM: TDX: Implement TDX vcpu enter/exit path")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20250415104821.247234-3-adrian.hunter@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Not all VMs allow access to RIP. Check guest_state_protected before
calling kvm_rip_read().
This avoids, for example, hitting WARN_ON_ONCE in vt_cache_reg() for
TDX VMs.
Fixes: 81bf912b2c ("KVM: TDX: Implement TDX vcpu enter/exit path")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20250415104821.247234-2-adrian.hunter@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the AMD IOMMU doesn't signal success incorrectly, WARN if KVM
attempts to track an AMD IRTE entry without metadata.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
WARN if KVM attempts to set vCPU affinity when posted interrupts aren't
enabled, as KVM shouldn't try to enable posting when they're unsupported,
and the IOMMU driver darn well should only advertise posting support when
AMD_IOMMU_GUEST_IR_VAPIC() is true.
Note, KVM consumes is_guest_mode only on success.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return -EINVAL instead of success if amd_ir_set_vcpu_affinity() is
invoked without use_vapic; lying to KVM about whether or not the IRTE was
configured to post IRQs is all kinds of bad.
Fixes: d98de49a53 ("iommu/amd: Enable vAPIC interrupt remapping mode by default")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Take irqfds.lock when adding/deleting an IRQ bypass producer to ensure
irqfd->producer isn't modified while kvm_irq_routing_update() is running.
The only lock held when a producer is added/removed is irqbypass's mutex.
Fixes: 8727688006 ("KVM: x86: select IRQ_BYPASS_MANAGER")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly treat type differences as GSI routing changes, as comparing MSI
data between two entries could get a false negative, e.g. if userspace
changed the type but left the type-specific data as-is.
Fixes: 515a0c79e7 ("kvm: irqfd: avoid update unmodified entries of the routing")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250404193923.1413163-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
