The control register for TWSI8 clocks, APBC_TWSI8_CLK_RST, contains mux
selection bits, reset assertion bit and enable bits for function and bus
clocks. It has a quirk that reading always results in zero.
As a workaround, let's hardcode the mux value as zero to select
pll1_d78_31p5 as parent and treat twsi8_clk as a gate, whose enable mask
is combined from the real bus and function clocks to avoid the
write-only register being shared between two clk_hws, in which case
updates of one clk_hw zero the other's bits.
With a 1:1 factor serving as placeholder for the bus clock, the I2C-8
controller could be brought up, which is essential for boards attaching
power-management chips to it.
Signed-off-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250416135406.16284-5-heylenay@4d2.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
The clock tree of K1 SoC contains three main types of clock hardware
(PLL/DDN/MIX) and has control registers split into several multifunction
devices: APBS (PLLs), MPMU, APBC and APMU.
All register operations are done through regmap to ensure atomicity
between concurrent operations of clock driver and reset,
power-domain driver that will be introduced in the future.
Signed-off-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250416135406.16284-4-heylenay@4d2.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Add definition for the PLL found on SpacemiT K1 SoC, which takes the
external 24MHz oscillator as input and generates clocks in various
frequencies for the system.
Signed-off-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250416135406.16284-3-heylenay@4d2.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Document APMU, MPMU and APBC syscons found on SpacemiT K1 SoC, which are
capable of generating clock and reset signals. Additionally, APMU and MPMU
manage power domains.
Signed-off-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250416135406.16284-2-heylenay@4d2.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Mike reports that commit 6d71a9c616 ("sched/fair: Fix EEVDF entity
placement bug causing scheduling lag") relies on commit 4423af84b2
("sched/fair: optimize the PLACE_LAG when se->vlag is zero") to not
trip a WARN in place_entity().
What happens is that the lag of the very last entity is 0 per
definition -- the average of one element matches the value of that
element. Therefore place_entity() will match the condition skipping
the lag adjustment:
if (sched_feat(PLACE_LAG) && cfs_rq->nr_queued && se->vlag) {
Without the 'se->vlag' condition -- it will attempt to adjust the zero
lag even though we're inserting into an empty tree.
Notably, we should have failed the 'cfs_rq->nr_queued' condition, but
don't because they didn't get updated.
Additionally, move update_load_add() after placement() as is
consistent with other place_entity() users -- this change is
non-functional, place_entity() does not use cfs_rq->load.
Fixes: 6d71a9c616 ("sched/fair: Fix EEVDF entity placement bug causing scheduling lag")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/c216eb4ef0e0e0029c600aefc69d56681cee5581.camel@gmx.de
Add a file to read local group's "asym_prefer_cpu" from debugfs. This
information was useful when debugging issues where "asym_prefer_cpu" was
incorrectly set to a CPU with a lower asym priority.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250409053446.23367-5-kprateek.nayak@amd.com
A subset of AMD systems supporting Preferred Core rankings can have
their rankings changed dynamically at runtime. Update the
"sg->asym_prefer_cpu" across the local hierarchy of CPU when the
preferred core ranking changes.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20250409053446.23367-4-kprateek.nayak@amd.com
A subset of AMD Processors supporting Preferred Core Rankings also
feature the ability to dynamically switch these rankings at runtime to
bias load balancing towards or away from the LLC domain with larger
cache.
To support dynamically updating "sg->asym_prefer_cpu" without needing to
rebuild the sched domain, introduce sched_update_asym_prefer_cpu() which
recomutes the "asym_prefer_cpu" when the core-ranking of a CPU changes.
sched_update_asym_prefer_cpu() swaps the "sg->asym_prefer_cpu" with the
CPU whose ranking has changed if the new ranking is greater than that of
the "asym_prefer_cpu". If CPU whose ranking has changed is the current
"asym_prefer_cpu", it scans the CPUs of the sched groups to find the new
"asym_prefer_cpu" and sets it accordingly.
get_group() for non-overlapping sched domains returns the sched group
for the first CPU in the sched_group_span() which ensures all CPUs in
the group see the updated value of "asym_prefer_cpu".
Overlapping groups are allocated differently and will require moving the
"asym_prefer_cpu" to "sg->sgc" but since the current implementations do
not set "SD_ASYM_PACKING" at NUMA domains, skip additional
indirection and place a SCHED_WARN_ON() to alert any future users.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250409053446.23367-3-kprateek.nayak@amd.com
Subsequent commits add the support to dynamically update the sched_group
struct's "asym_prefer_cpu" member from a remote CPU. Use READ_ONCE()
when reading the "sg->asym_prefer_cpu" to ensure load balancer always
reads the latest value.
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250409053446.23367-2-kprateek.nayak@amd.com
Add sanity checking to some test harness functions to help catch bugs
in the test code. This consists of checking the range of some arguments
and checking that reads from the dummy regmap succeed.
Most of the harness code already had sanity-checking but there were a
few places where it was missing or was assumed that the test could be
trusted to pass valid values.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250416122422.783215-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch added the PDE status check which makes sure the PDE transition is done.
It will decrease the pop noise at the beginning of DMIC recording.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://patch.msgid.link/20250416092547.737879-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
batadv_check_known_mac_addr() is both too lenient and too strict:
- It is called from batadv_hardif_add_interface(), which means that it
checked interfaces that are not used for batman-adv at all. Move it
to batadv_hardif_enable_interface(). Also, restrict it to hardifs of
the same mesh interface; different mesh interfaces should not interact
at all. The batadv_check_known_mac_addr() argument is changed from
`struct net_device` to `struct batadv_hard_iface` to achieve this.
- The check only cares about hardifs in BATADV_IF_ACTIVE and
BATADV_IF_TO_BE_ACTIVATED states, but interfaces in BATADV_IF_INACTIVE
state should be checked as well, or the following steps will not
result in a warning then they should:
- Add two interfaces in down state with different MAC addresses to
a mesh as hardifs
- Change the MAC addresses so they conflict
- Set interfaces to up state
Now there will be two active hardifs with the same MAC address, but no
warning. Fix by only ignoring hardifs in BATADV_IF_NOT_IN_USE state.
The RCU lock can be dropped, as we're holding RTNL anyways when the
function is called.
Fixes: c6c8fea297 ("net: Add batman-adv meshing protocol")
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
bash and dash evaluate variables differently.
dash will evaluate '\\' every time it is read whereas bash does not.
TEST_STRING="$TEST_STRING \\$i"
echo $TEST_STRING
With i=123
On bash, that will print "\123"
but on dash, that will print the escape sequence of \123 as the \ will be
interpreted again in the echo.
The dynevent_limitations.tc test created a very large list of arguments to
test the maximum number of arguments to pass to the dynamic events file.
It had a loop of:
TEST_STRING=$1
# Acceptable
for i in `seq 1 $MAX_ARGS`; do
TEST_STRING="$TEST_STRING \\$i"
done
echo "$TEST_STRING" >> dynamic_events
This worked fine on bash, but when run on dash it failed.
This was due to dash interpreting the "\\$i" twice. Once when it was
assigned to TEST_STRING and a second time with the echo $TEST_STRING.
bash does not process the backslash more than the first time.
To solve this, assign a double backslash to a variable "bs" and then echo
it to "ts". If "ts" changes, it is dash, if not, it is bash. Then update
"bs" accordingly, and use that to assign TEST_STRING.
Now this could possibly just check if "$BASH" is defined or not, but this
is testing if the issue exists and not just which shell is being used.
Link: https://lore.kernel.org/r/20250414210900.4de5e8b9@gandalf.local.home
Fixes: 581a7b26ab ("selftests/ftrace: Add dynamic events argument limitation test case")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/350786cc-9e40-4396-ab95-4f10d69122fb@sirena.org.uk/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The 32-bit sparc configuration (--arch sparc) crashes on
the kunit_fault_test. It's known that some architectures don't handle
deliberate segfaults in kernel mode well, so there's a config switch to
disable tests which rely upon it by default.
Use this for the sparc config, making sure the default config for it
passes.
Link: https://lore.kernel.org/r/20250416093826.1550040-1-davidgow@google.com
Fixes: 87c9c16317 ("kunit: tool: add support for QEMU")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Tested-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The configuration generated by kunit ends up with a 32bit configuration.
A new kunit configuration for 64bit is to be added.
To make the difference clearer spell out the variant in the kunit
reference config.
Link: https://lore.kernel.org/r/20250415-kunit-qemu-sparc64-v1-1-253906f61102@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
pci_read_bases() is given literal 6 that means PCI_STD_NUM_BARS. Replace
the literal with the define to annotate the code better.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Link: https://patch.msgid.link/20250416100239.6958-1-ilpo.jarvinen@linux.intel.com
Add the camera subsystem and CCI used to interface with cameras on the
Snapdragon 670.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250205035013.206890-8-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- A couple of fixes regarding module relocations
- Fix a build error by implementing missing alternative macros
- Another fix for kexec by fixing /proc/iomem
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQgN2CKhD/Nf5v80u9kP7K8koXvigUCZ//mhQAKCRBkP7K8koXv
iqjNAQCke5JNfU6ZhIfwZokrWCIU5CJO0WF9uGl0u972YiazkQD/fKC7nL0e6BDZ
2/Ha31y8pmjLUDAlC8+yxzuhec5QyQ4=
=A6JZ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=M/+3
-----END PGP SIGNATURE-----
Merge tag 'riscv-fixes-6.15-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux into fixes
riscv fixes for 6.15-rc3
- A couple of fixes regarding module relocations
- Fix a build error by implementing missing alternative macros
- Another fix for kexec by fixing /proc/iomem
* tag 'riscv-fixes-6.15-rc3' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/alexghiti/linux:
riscv: Avoid fortify warning in syscall_get_arguments()
riscv: Provide all alternative macros all the time
riscv: module: Allocate PLT entries for R_RISCV_PLT32
riscv: module: Fix out-of-bounds relocation access
riscv: Properly export reserved regions in /proc/iomem
riscv: Fix unaligned access info messages
Some newer high refresh rate consumer monitors (including those by Samsung)
make use of DisplayID 2.1 timing blocks in their EDID data, notably for
their highest refresh rate modes. Such modes won't be available as of now.
Implement partial support for such blocks in order to enable native
support of HRR modes of most such monitors for users without having to rely
on EDID patching/override (or need thereof).
Closes: https://gitlab.freedesktop.org/drm/misc/kernel/-/issues/55
Suggested-by: Maximilian Boße <max@bosse.io>
Signed-off-by: Egor Vorontsov <sdoregor@sdore.me>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/d795d27c6f60596df402ff151ce29938e2ad4f53.1744708239.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The static key mmio_stale_data_clear controls the KVM-only mitigation for MMIO
Stale Data vulnerability. Rename it to reflect its purpose.
No functional change.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250416-mmio-rename-v2-1-ad1f5488767c@linux.intel.com
Once the lazy preemption is supported, it would be desirable to change
the preemption models at runtime. So add support for dynamic preemption
using DYNAMIC_KEY.
::Tested lightly on Power10 LPAR
Performance numbers indicate that, preempt=none(no dynamic) and
preempt=none(dynamic) are close.
cat /sys/kernel/debug/sched/preempt
(none) voluntary full lazy
perf stat -e probe:__cond_resched -a sleep 1
Performance counter stats for 'system wide':
1,253 probe:__cond_resched
echo full > /sys/kernel/debug/sched/preempt
cat /sys/kernel/debug/sched/preempt
none voluntary (full) lazy
perf stat -e probe:__cond_resched -a sleep 1
Performance counter stats for 'system wide':
0 probe:__cond_resched
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250210184334.567383-2-sshegde@linux.ibm.com
The BUILD_BUG_ON() assertion was commented out in commit 38634e6769
("powerpc/kvm: Remove problematic BUILD_BUG_ON statement") and fixed in
commit c0a187e12d ("KVM: powerpc: Fix BUILD_BUG_ON condition"), but
not enabled. Enable it now that this no longer breaks and remove the
comment.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250411084222.6916-1-thorsten.blum@linux.dev
Remove hard-coded strings by using the str_enabled_disabled() helper
function.
Use pr_debug() instead of printk(KERN_DEBUG) to silence a checkpatch
warning.
Reviewed-by: Ricardo B. Marlière <ricardo@marliere.net>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250219112053.3352-2-thorsten.blum@linux.dev
Update 'kvm-hv-pmu.c' to add five new perf-events mapped to the five
Hostwide counters. Since these newly introduced perf events are at system
wide scope and can be read from any L1-Lpar CPU, 'kvmppc_pmu' scope and
capabilities are updated appropriately.
Also introduce two new helpers. First is kvmppc_update_l0_stats() that uses
the infrastructure introduced in previous patches to issues the
H_GUEST_GET_STATE hcall L0-PowerVM to fetch guest-state-buffer holding the
latest values of these counters which is then parsed and 'l0_stats'
variable updated.
Second helper is kvmppc_pmu_event_update() which is called from
'kvmppv_pmu' callbacks and uses kvmppc_update_l0_stats() to update
'l0_stats' and the update the 'struct perf_event's event-counter.
Some minor updates to kvmppc_pmu_{add, del, read}() to remove some debug
scaffolding code.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416162740.93143-7-vaibhav@linux.ibm.com
Implement and setup necessary structures to send a prepolulated
Guest-State-Buffer(GSB) requesting hostwide counters to L0-PowerVM and have
the returned GSB holding the values of these counters parsed. This is done
via existing GSB implementation and with the newly added support of
Hostwide elements in GSB.
The request to L0-PowerVM to return Hostwide counters is done using a
pre-allocated GSB named 'gsb_l0_stats'. To be able to populate this GSB
with the needed Guest-State-Elements (GSIDs) a instance of 'struct
kvmppc_gs_msg' named 'gsm_l0_stats' is introduced. The 'gsm_l0_stats' is
tied to an instance of 'struct kvmppc_gs_msg_ops' named 'gsb_ops_l0_stats'
which holds various callbacks to be compute the size ( hostwide_get_size()
), populate the GSB ( hostwide_fill_info() ) and
refresh ( hostwide_refresh_info() ) the contents of
'l0_stats' that holds the Hostwide counters returned from L0-PowerVM.
To protect these structures from simultaneous access a spinlock
'lock_l0_stats' has been introduced. The allocation and initialization of
the above structures is done in newly introduced kvmppc_init_hostwide() and
similarly the cleanup is performed in newly introduced
kvmppc_cleanup_hostwide().
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416162740.93143-6-vaibhav@linux.ibm.com
Introduce a new PMU named 'kvm-hv' inside a new module named 'kvm-hv-pmu'
to report Book3s kvm-hv specific performance counters. This will expose
KVM-HV specific performance attributes to user-space via kernel's PMU
infrastructure and would enableusers to monitor active kvm-hv based guests.
The patch creates necessary scaffolding to for the new PMU callbacks and
introduces the new kernel module name 'kvm-hv-pmu' which is built with
CONFIG_KVM_BOOK3S_HV_PMU. The patch doesn't introduce any perf-events yet,
which will be introduced in later patches
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416162740.93143-5-vaibhav@linux.ibm.com
Update 'test-guest-state-buffer.c' to add two new KUNIT test cases for
validating correctness of changes to Guest-state-buffer management
infrastructure for adding support for Hostwide GSB elements.
The newly introduced test test_gs_hostwide_msg() checks if the Hostwide
elements can be set and parsed from a Guest-state-buffer. The second kunit
test test_gs_hostwide_counters() checks if the Hostwide GSB elements can be
send to the L0-PowerVM hypervisor via the H_GUEST_SET_STATE hcall and
ensures that the returned guest-state-buffer has all the 5 Hostwide stat
counters present.
Below is the KATP test report with the newly added KUNIT tests:
KTAP version 1
# Subtest: guest_state_buffer_test
# module: test_guest_state_buffer
1..7
ok 1 test_creating_buffer
ok 2 test_adding_element
ok 3 test_gs_bitmap
ok 4 test_gs_parsing
ok 5 test_gs_msg
ok 6 test_gs_hostwide_msg
# test_gs_hostwide_counters: Guest Heap Size=0 bytes
# test_gs_hostwide_counters: Guest Heap Size Max=10995367936 bytes
# test_gs_hostwide_counters: Guest Page-table Size=2178304 bytes
# test_gs_hostwide_counters: Guest Page-table Size Max=2147483648 bytes
# test_gs_hostwide_counters: Guest Page-table Reclaim Size=0 bytes
ok 7 test_gs_hostwide_counters
# guest_state_buffer_test: pass:7 fail:0 skip:0 total:7
# Totals: pass:7 fail:0 skip:0 total:7
ok 1 guest_state_buffer_test
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416162740.93143-4-vaibhav@linux.ibm.com
Add support for adding and parsing Hostwide elements to the
Guest-state-buffer data structure used in apiv2. These elements are used to
share meta-information pertaining to entire L1-Lpar and this
meta-information is maintained by L0-PowerVM hypervisor. Example of this
include the amount of the page-table memory currently used by L0-PowerVM
for hosting the Shadow-Pagetable of all active L2-Guests. More of the are
documented in kernel-documentation at [1]. The Hostwide GSB elements are
currently only support with H_GUEST_SET_STATE hcall with a special flag
namely 'KVMPPC_GS_FLAGS_HOST_WIDE'.
The patch introduces new defs for the 5 new Hostwide GSB elements including
their GSIDs as well as introduces a new class of GSB elements namely
'KVMPPC_GS_CLASS_HOSTWIDE' to indicate to GSB construction/parsing
infrastructure in 'kvm/guest-state-buffer.c'. Also
gs_msg_ops_vcpu_get_size(), kvmppc_gsid_type() and
kvmppc_gse_{flatten,unflatten}_iden() are updated to appropriately indicate
the needed size for these Hostwide GSB elements as well as how to
flatten/unflatten their GSIDs so that they can be marked as available in
GSB bitmap.
[1] Documention/arch/powerpc/kvm-nested.rst
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416162740.93143-3-vaibhav@linux.ibm.com
Update kvm-nested APIv2 documentation to include five new
Guest-State-Elements to fetch the hostwide counters. These counters are
per L1-Lpar and indicate the amount of Heap/Page-table memory allocated,
available and Page-table memory reclaimed for all L2-Guests active
instances
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Gautam Menghani <gautam@linux.ibm.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250416162740.93143-2-vaibhav@linux.ibm.com
Changes the boe-bf060y8m-aj0 panel to use multi style functions for
improved error handling. Additionally the MIPI_DSI_MODE_LPM flag is set
after the off commands are run in boe_bf060y8m_aj0_off regardless of any
failures, and regulators are disabled if the boe_bf060y8m_aj0_on call in
boe_bf060y8m_aj0_prepare fails.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Tejas Vipin <tejasvipin76@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250413035959.255842-1-tejasvipin76@gmail.com
Remove of_node assignment which duplicates fwnode in struct i2c_board_info.
In general drivers must not set both, it's quite confusing. The I²C core
will consider fwnode with a priority and of_node is subject to remove from
above mentioned data structure.
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Two members of the same or quite similar semantics is quite confusing
to begin with. Moreover, fwnode covers all possible firmware descriptions
that Linux kernel supports. Deprecate of_node in struct i2c_board_info,
so users will be warned and in the future there is a plan to convert
the users and remove it completely.
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
In order to make the underneath API easier to change in the future,
prevent users from dereferencing fwnode from struct device.
Instead, use the specific device_set_node() API for that.
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reuse fwnode variable where it makes sense. This avoids unneeded
duplication hidden in some macros and unifies the code for different
types of fwnode.
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Switch to fwnode APIs to get IRQ. In particular this enables
a support of the separate wakeup IRQ on non-OF platforms.
The rest is converted just for the sake of consistency and
fwnode reuse.
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
OF and ACPI currently are using asymmetrical APIs to check
for the firmware node type. Unify them by using is_*_node()
against struct fwnode_handle pointer.
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
OF APIs are usually NULL-aware and return an error in case when
device node is not present or supported. We already have a check
for the returned value, no need to check for the parameter.
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The fwnode.h is not supposed to be used by the drivers as it
has the definitions for the core parts for different device
property provider implementations. Drop it.
Note, that fwnode API for drivers is provided in property.h
which is included here.
Fixes: a076a860ac ("media: i2c: add I2C Address Translator (ATR) support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
[wsa: reworded subject]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
We no longer support any boards with the da830 SoC in mainline linux.
Let's remove all bits and pieces related to it.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20250407-davinci-remove-da830-v1-1-39f803dd5a14@linaro.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-gpio-part1-v1-4-78399683ca38@linaro.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-gpio-part1-v1-3-78399683ca38@linaro.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-gpio-part1-v1-2-78399683ca38@linaro.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-gpio-part1-v1-1-78399683ca38@linaro.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
arm/memremap: fix arch_memremap_can_ram_remap()
commit 260364d112 ("arm[64]/memremap: don't abuse pfn_valid() to ensure
presence of linear map") added the definition of
arch_memremap_can_ram_remap() for arm[64] specific filtering of what pages
can be used from the linear mapping. memblock_is_map_memory() was called
with the pfn of the address given to arch_memremap_can_ram_remap();
however, memblock_is_map_memory() expects to be given an address for arm,
not a pfn.
This results in calls to memremap() returning a newly mapped area when
it should return an address in the existing linear mapping.
Fix this by removing the address to pfn translation and pass the
address directly.
Fixes: 260364d112 ("arm[64]/memremap: don't abuse pfn_valid() to ensure presence of linear map")
Signed-off-by: Ross Stutterheim <ross.stutterheim@garmin.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
The setting of EXPERT is a leftover from when the riscv defconfig was
first added. As mentioned in the EXPERT Kconfig help text it is not
intended to be set in the usual case.
Upon removal a bunch of intrusive debug-related kernel options are no
longer set, which is good. A few may want to come back in the future but
let those be advocated for on a case by case basis.
NAMESPACES, SYSFS_SYSCALL and MEDIA_SUPPORT_FILTER default on and thus
fall out of the defconfig.
Set VIDEO_CADENCE_CSI2RX=y to ensure VIDEO_CADENCE_CSI2RX stays enabled.
Set DEBUG_KERNEL=y in line with other arch defconfigs. This turns on
tracing.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20250415122832.982610-1-joel@jms.id.au
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
- Disable ahash request chaining as it causes problems with the sa2ul driver.
- Fix a couple of bugs in the new scomp stream freeing code.
- Fix an old caam refcount underflow that is possibly showing up now
because of the new parallel self-tests.
- Fix regression in the tegra driver.
-----BEGIN PGP SIGNATURE-----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=k6XA
-----END PGP SIGNATURE-----
Merge tag 'v6.15-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Disable ahash request chaining as it causes problems with the sa2ul
driver
- Fix a couple of bugs in the new scomp stream freeing code
- Fix an old caam refcount underflow that is possibly showing up now
because of the new parallel self-tests
- Fix regression in the tegra driver
* tag 'v6.15-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ahash - Disable request chaining
crypto: scomp - Fix wild memory accesses in scomp_free_streams
crypto: caam/qi - Fix drv_ctx refcount bug
crypto: scomp - Fix null-pointer deref when freeing streams
crypto: tegra - Fix IV usage for AES ECB
