Enable GCC, Pinctrl for Qualcomm's IPQ5424 SoC which is required
to boot IPQ5424-RDP466 boards to a console shell.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Link: https://lore.kernel.org/r/20241028060506.246606-7-quic_srichara@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-20-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-19-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-18-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-17-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-16-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-15-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-14-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-13-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-12-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-11-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-10-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-9-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-8-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-7-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-6-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-5-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-4-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use allocated region size for VBIF regions as defined by the docs
(0x3000) instead of just using the last register address.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-3-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Change the tag for MDP interconnects to QCOM_ICC_TAG_ALWAYS, so that if
CPUSS collapses, the display may stay on.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415-drm-msm-dts-fixes-v1-2-90cd91bdd138@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
During initial porting these cd-gpios were missed. Having card detect is
beneficial because driver does not need to do polling every second and it
can just use IRQ. SD card detection in U-Boot is also fixed by this.
Fixes: cf85e9aee2 ("arm64: dts: qcom: sdm660-xiaomi-lavender: Add eMMC and SD")
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250415130101.1429281-1-alexeymin@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The CONFIG_BLK_DEV_UBLK help text suggests setting the config option to
Y so task_work_add() can be used to dispatch I/O, improving performance.
However, this mechanism was removed in commit 29dc5d0661 ("ublk: kill
queuing request by task_work_add"). So remove this paragraph from the
config help text.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250416004111.3242817-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
vfs_iter_{read,write} always perform direct I/O when the file has the
O_DIRECT flag set, which breaks disabling direct I/O using the
LOOP_SET_STATUS / LOOP_SET_STATUS64 ioctls.
This was recenly reported as a regression, but as far as I can tell
was only uncovered by better checking for block sizes and has been
around since the direct I/O support was added.
Fix this by using the existing aio code that calls the raw read/write
iter methods instead. Note that despite the comments there is no need
for block drivers to ever call flush_dcache_page themselves, and the
call is a left-over from prehistoric times.
Fixes: ab1cb278bc ("block: loop: introduce ioctl command of LOOP_SET_DIRECT_IO")
Reported-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20250409130940.3685677-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ido Schimmel says:
====================
fib_rules: Fix iif / oif matching on L3 master device
Patch #1 fixes a recently reported regression regarding FIB rules that
match on iif / oif being a VRF device.
Patch #2 adds test cases to the FIB rules selftest.
====================
Link: https://patch.msgid.link/20250414172022.242991-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests for FIB rules that match on iif / oif being a VRF device. Test
both good and bad flows.
With previous patch ("net: fib_rules: Fix iif / oif matching on L3
master device"):
# ./fib_rule_tests.sh
[...]
Tests passed: 328
Tests failed: 0
Without it:
# ./fib_rule_tests.sh
[...]
Tests passed: 324
Tests failed: 4
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250414172022.242991-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before commit 40867d74c3 ("net: Add l3mdev index to flow struct and
avoid oif reset for port devices") it was possible to use FIB rules to
match on a L3 domain. This was done by having a FIB rule match on iif /
oif being a L3 master device. It worked because prior to the FIB rule
lookup the iif / oif fields in the flow structure were reset to the
index of the L3 master device to which the input / output device was
enslaved to.
The above scheme made it impossible to match on the original input /
output device. Therefore, cited commit stopped overwriting the iif / oif
fields in the flow structure and instead stored the index of the
enslaving L3 master device in a new field ('flowi_l3mdev') in the flow
structure.
While the change enabled new use cases, it broke the original use case
of matching on a L3 domain. Fix this by interpreting the iif / oif
matching on a L3 master device as a match against the L3 domain. In
other words, if the iif / oif in the FIB rule points to a L3 master
device, compare the provided index against 'flowi_l3mdev' rather than
'flowi_{i,o}if'.
Before cited commit, a FIB rule that matched on 'iif vrf1' would only
match incoming traffic from devices enslaved to 'vrf1'. With the
proposed change (i.e., comparing against 'flowi_l3mdev'), the rule would
also match traffic originating from a socket bound to 'vrf1'. Avoid that
by adding a new flow flag ('FLOWI_FLAG_L3MDEV_OIF') that indicates if
the L3 domain was derived from the output interface or the input
interface (when not set) and take this flag into account when evaluating
the FIB rule against the flow structure.
Avoid unnecessary checks in the data path by detecting that a rule
matches on a L3 master device when the rule is installed and marking it
as such.
Tested using the following script [1].
Output before 40867d74c3 (v5.4.291):
default dev dummy1 table 100 scope link
default dev dummy1 table 200 scope link
Output after 40867d74c3:
default dev dummy1 table 300 scope link
default dev dummy1 table 300 scope link
Output with this patch:
default dev dummy1 table 100 scope link
default dev dummy1 table 200 scope link
[1]
#!/bin/bash
ip link add name vrf1 up type vrf table 10
ip link add name dummy1 up master vrf1 type dummy
sysctl -wq net.ipv4.conf.all.forwarding=1
sysctl -wq net.ipv4.conf.all.rp_filter=0
ip route add table 100 default dev dummy1
ip route add table 200 default dev dummy1
ip route add table 300 default dev dummy1
ip rule add prio 0 oif vrf1 table 100
ip rule add prio 1 iif vrf1 table 200
ip rule add prio 2 table 300
ip route get 192.0.2.1 oif dummy1 fibmatch
ip route get 192.0.2.1 iif dummy1 from 198.51.100.1 fibmatch
Fixes: 40867d74c3 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: hanhuihui <hanhuihui5@huawei.com>
Closes: https://lore.kernel.org/netdev/ec671c4f821a4d63904d0da15d604b75@huawei.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250414172022.242991-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit under Fixes converted tx_prod to be free running but missed
masking it on the Tx error path. This crashes on error conditions,
for example when DMA mapping fails.
Fixes: 6d1add9553 ("bnxt_en: Modify TX ring indexing logic.")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250414143210.458625-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If multicast snooping is enabled, multicast packets may not always end up
on the local bridge interface, if the host is not a member of the multicast
group. Similar to how IFF_PROMISC allows all packets to be received
locally, let IFF_ALLMULTI allow all multicast packets to be received.
OpenWrt uses a user space daemon for DHCPv6/RA/NDP handling, and in relay
mode it sets the ALLMULTI flag in order to receive all relevant queries on
the network.
This works for normal network interfaces and non-snooping bridges, but not
snooping bridges (unless multicast routing is enabled).
Reported-by: Felix Fietkau <nbd@nbd.name>
Closes: https://github.com/openwrt/openwrt/issues/15857#issuecomment-2662851243
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/OSZPR01MB8434308370ACAFA90A22980798B32@OSZPR01MB8434.jpnprd01.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A reference to the device tree node is stored in a private struct, thus
the reference count has to be incremented. Also, decrement the count on
device removal and in the error path.
Fixes: 93a7653031 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250414083942.4015060-1-mwalle@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
drivers/net/phy/Kconfig is included from drivers/net/Kconfig in an
"if NETDEVICES" section. Therefore we don't have to duplicate the
dependency here. And if e.g. PHYLINK is selected somewhere, then the
dependency is ignored anyway (see note in Kconfig help).
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/085892cd-aa11-4c22-bf8a-574a5c6dcd7c@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding error pointer check after calling otx2_mbox_get_rsp().
This is similar to the commit bd3110bc10
("octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_flows.c").
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Fixes: 6c40ca957f ("octeontx2-pf: Adds TC offload support")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250412183327.3550970-1-chenyuan0y@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While developing the fix for the buffer sizing issue in [0], I noticed
that the kernel will happily accept a long list of actions for a filter,
and then just silently truncate that list down to a maximum of 32
actions.
That seems less than ideal, so this patch changes the action parsing to
return an error message and refuse to create the filter in this case.
This results in an error like:
# ip link add type veth
# tc qdisc replace dev veth0 root handle 1: fq_codel
# tc -echo filter add dev veth0 parent 1: u32 match u32 0 0 $(for i in $(seq 33); do echo action pedit munge ip dport set 22; done)
Error: Only 32 actions supported per filter.
We have an error talking to the kernel
Instead of just creating a filter with 32 actions and dropping the last
one.
This is obviously a change in UAPI. But seeing as creating more than 32
filters has never actually *worked*, it seems that returning an explicit
error is better, and any use cases that get broken by this were already
broken just in more subtle ways.
[0] https://lore.kernel.org/r/20250407105542.16601-1-toke@redhat.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250409145523.164506-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 479380efe1.
The reset_method attribute on a PCI device is only intended to manage the
availability of function scoped resets for a device. It was never intended
to restrict resets targeting the bus or slot.
In introducing a restriction that each device must support function level
reset by testing pci_reset_supported(), we essentially create a catch-22,
that a device must have a function scope reset in order to support bus/slot
reset, when we use bus/slot reset to effect a reset of a device that does
not support a function scoped reset, especially multi-function devices.
This breaks the majority of uses cases where vfio-pci uses bus/slot resets
to manage multifunction devices that do not support function scoped resets.
Fixes: 479380efe1 ("PCI: Avoid reset when disabled via sysfs")
Reported-by: Cal Peake <cp@absolutedigital.net>
Closes: https://lore.kernel.org/all/808e1111-27b7-f35b-6d5c-5b275e73677b@absolutedigital.net
Reported-by: Athul Krishna <athul.krishna.kr@protonmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220010
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250414211828.3530741-1-alex.williamson@redhat.com
As shown in [1], it is possible to corrupt a BPF ELF file such that
arbitrary BPF instructions are loaded by libbpf. This can be done by
setting a symbol (BPF program) section offset to a large (unsigned)
number such that <section start + symbol offset> overflows and points
before the section data in the memory.
Consider the situation below where:
- prog_start = sec_start + symbol_offset <-- size_t overflow here
- prog_end = prog_start + prog_size
prog_start sec_start prog_end sec_end
| | | |
v v v v
.....................|################################|............
The report in [1] also provides a corrupted BPF ELF which can be used as
a reproducer:
$ readelf -S crash
Section Headers:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
...
[ 2] uretprobe.mu[...] PROGBITS 0000000000000000 00000040
0000000000000068 0000000000000000 AX 0 0 8
$ readelf -s crash
Symbol table '.symtab' contains 8 entries:
Num: Value Size Type Bind Vis Ndx Name
...
6: ffffffffffffffb8 104 FUNC GLOBAL DEFAULT 2 handle_tp
Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will
point before the actual memory where section 2 is allocated.
This is also reported by AddressSanitizer:
=================================================================
==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490
READ of size 104 at 0x7c7302fe0000 thread T0
#0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76)
#1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856
#2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928
#3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930
#4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067
#5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090
#6 0x000000400c16 in main /poc/poc.c:8
#7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4)
#8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667)
#9 0x000000400b34 in _start (/poc/poc+0x400b34)
0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8)
allocated by thread T0 here:
#0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b)
#1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600)
#2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018)
#3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740
The problem here is that currently, libbpf only checks that the program
end is within the section bounds. There used to be a check
`while (sec_off < sec_sz)` in bpf_object__add_programs, however, it was
removed by commit 6245947c1b ("libbpf: Allow gaps in BPF program
sections to support overriden weak functions").
Add a check for detecting the overflow of `sec_off + prog_sz` to
bpf_object__init_prog to fix this issue.
[1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md
Fixes: 6245947c1b ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")
Reported-by: lmarch2 <2524158037@qq.com>
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md
Link: https://lore.kernel.org/bpf/20250415155014.397603-1-vmalik@redhat.com
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/20250408-gpiochip-set-rv-pinctrl-part1-v1-6-c9d521d7c8c7@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/20250408-gpiochip-set-rv-pinctrl-part1-v1-5-c9d521d7c8c7@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250408-gpiochip-set-rv-pinctrl-part1-v1-4-c9d521d7c8c7@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250408-gpiochip-set-rv-pinctrl-part1-v1-2-c9d521d7c8c7@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/20250408-gpiochip-set-rv-pinctrl-part1-v1-1-c9d521d7c8c7@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add dma_alloc_attrs() and dma_free_attrs() helpers to fix a build
error when CONFIG_HAS_DMA is not enabled.
Note that when CONFIG_HAS_DMA is enabled, dma_alloc_attrs() and
dma_free_attrs() are included in both bindings_generated.rs and
bindings_helpers_generated.rs. The former takes precedence so behavior
remains unchanged in that case.
This fixes the following build error on UML:
error[E0425]: cannot find function `dma_alloc_attrs` in crate `bindings`
--> rust/kernel/dma.rs:171:23
|
171 | bindings::dma_alloc_attrs(
| ^^^^^^^^^^^^^^^ help: a function with a similar name exists: `dma_alloc_pages`
|
::: rust/bindings/bindings_generated.rs:44568:5
|
44568 | / pub fn dma_alloc_pages(
44569 | | dev: *mut device,
44570 | | size: usize,
44571 | | dma_handle: *mut dma_addr_t,
44572 | | dir: dma_data_direction,
44573 | | gfp: gfp_t,
44574 | | ) -> *mut page;
| |___________________- similarly named function `dma_alloc_pages` defined here
error[E0425]: cannot find function `dma_free_attrs` in crate `bindings`
--> rust/kernel/dma.rs:293:23
|
293 | bindings::dma_free_attrs(
| ^^^^^^^^^^^^^^ help: a function with a similar name exists: `dma_free_pages`
|
::: rust/bindings/bindings_generated.rs:44577:5
|
44577 | / pub fn dma_free_pages(
44578 | | dev: *mut device,
44579 | | size: usize,
44580 | | page: *mut page,
44581 | | dma_handle: dma_addr_t,
44582 | | dir: dma_data_direction,
44583 | | );
| |______- similarly named function `dma_free_pages` defined here
Fixes: ad2907b4e3 ("rust: add dma coherent allocator abstraction")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250412000507.157000-1-fujita.tomonori@gmail.com
[ Reworded for relative paths. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When a Secondary Bus Reset is issued at a hotplug port, it causes a Data
Link Layer State Changed event as a side effect. On hotplug ports using
in-band presence detect, it additionally causes a Presence Detect Changed
event.
These spurious events should not result in teardown and re-enumeration of
the device in the slot. Hence commit 2e35afaefe ("PCI: pciehp: Add
reset_slot() method") masked the Presence Detect Changed Enable bit in the
Slot Control register during a Secondary Bus Reset. Commit 06a8d89af5
("PCI: pciehp: Disable link notification across slot reset") additionally
masked the Data Link Layer State Changed Enable bit.
However masking those bits only disables interrupt generation (PCIe r6.2
sec 6.7.3.1). The events are still visible in the Slot Status register
and picked up by the IRQ handler if it runs during a Secondary Bus Reset.
This can happen if the interrupt is shared or if an unmasked hotplug event
occurs, e.g. Attention Button Pressed or Power Fault Detected.
The likelihood of this happening used to be small, so it wasn't much of a
problem in practice. That has changed with the recent introduction of
bandwidth control in v6.13-rc1 with commit 665745f274 ("PCI/bwctrl:
Re-add BW notification portdrv as PCIe BW controller"):
Bandwidth control shares the interrupt with PCIe hotplug. A Secondary Bus
Reset causes a Link Bandwidth Notification, so the hotplug IRQ handler
runs, picks up the masked events and tears down the device in the slot.
As a result, Joel reports VFIO passthrough failure of a GPU, which Ilpo
root-caused to the incorrect handling of masked hotplug events.
Clearly, a more reliable way is needed to ignore spurious hotplug events.
For Downstream Port Containment, a new ignore mechanism was introduced by
commit a97396c6eb ("PCI: pciehp: Ignore Link Down/Up caused by DPC").
It has been working reliably for the past four years.
Adapt it for Secondary Bus Resets.
Introduce two helpers to annotate code sections which cause spurious link
changes: pci_hp_ignore_link_change() and pci_hp_unignore_link_change()
Use those helpers in lieu of masking interrupts in the Slot Control
register.
Introduce a helper to check whether such a code section is executing
concurrently and if so, await it: pci_hp_spurious_link_change()
Invoke the helper in the hotplug IRQ thread pciehp_ist(). Re-use the
IRQ thread's existing code which ignores DPC-induced link changes unless
the link is unexpectedly down after reset recovery or the device was
replaced during the bus reset.
That code block in pciehp_ist() was previously only executed if a Data
Link Layer State Changed event has occurred. Additionally execute it for
Presence Detect Changed events. That's necessary for compatibility with
PCIe r1.0 hotplug ports because Data Link Layer State Changed didn't exist
before PCIe r1.1. DPC was added with PCIe r3.1 and thus DPC-capable
hotplug ports always support Data Link Layer State Changed events.
But the same cannot be assumed for Secondary Bus Reset, which already
existed in PCIe r1.0.
Secondary Bus Reset is only one of many causes of spurious link changes.
Others include runtime suspend to D3cold, firmware updates or FPGA
reconfiguration. The new pci_hp_{,un}ignore_link_change() helpers may be
used by all kinds of drivers to annotate such code sections, hence their
declarations are publicly visible in <linux/pci.h>. A case in point is
the Mellanox Ethernet driver which disables a firmware reset feature if
the Ethernet card is attached to a hotplug port, see commit 3d7a3f2612
("net/mlx5: Nack sync reset request when HotPlug is enabled"). Going
forward, PCIe hotplug will be able to cope gracefully with all such use
cases once the code sections are properly annotated.
The new helpers internally use two bits in struct pci_dev's priv_flags as
well as a wait_queue. This mirrors what was done for DPC by commit
a97396c6eb ("PCI: pciehp: Ignore Link Down/Up caused by DPC"). That may
be insufficient if spurious link changes are caused by multiple sources
simultaneously. An example might be a Secondary Bus Reset issued by AER
during FPGA reconfiguration. If this turns out to happen in real life,
support for it can easily be added by replacing the PCI_LINK_CHANGING flag
with an atomic_t counter incremented by pci_hp_ignore_link_change() and
decremented by pci_hp_unignore_link_change(). Instead of awaiting a zero
PCI_LINK_CHANGING flag, the pci_hp_spurious_link_change() helper would
then simply await a zero counter.
Fixes: 665745f274 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller")
Reported-by: Joel Mathew Thomas <proxy0@tutamail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219765
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Joel Mathew Thomas <proxy0@tutamail.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/d04deaf49d634a2edf42bf3c06ed81b4ca54d17b.1744298239.git.lukas@wunner.de
Remove the `volatile` qualifier used with __iomem in helper functions
in io.c. These helper functions are just wrappers around the
corresponding accessors so they are unnecessary.
This fixes the following UML build error with CONFIG_RUST enabled:
In file included from rust/helpers/helpers.c:19:
rust/helpers/io.c:12:10: error: passing 'volatile void *' to parameter of type 'void *' discards qualifiers [-Werror,-Wincompatible-pointer-types-discards-qualifiers]
12 | iounmap(addr);
| ^~~~
arch/um/include/asm/io.h:19:42: note: passing argument to parameter 'addr' here
19 | static inline void iounmap(void __iomem *addr)
| ^
1 error generated.
[ Arnd explains [1] that removing the qualifier is the way forward
(thanks!):
Rihgt, I tried this last week when it came up first, removing the
'volatile' annotations in the asm-generic/io.h header and then
all the ones that caused build regressions on arm/arm64/x86
randconfig and allmodconfig builds. This patch is a little
longer than my original version as I did run into a few
regressions later.
As far as I can tell, none of these volatile annotations have
any actual effect, and most of them date back to ancient kernels
where this may have been required.
Leaving it out of the rust interface is clearly the right way,
and it shouldn't be too hard to upstream the changes below
when we need to, but I also don't see any priority to send these.
If anyone wants to help out, I can send them the whole patch.
I created an issue [2] in case someone wants to help. - Miguel ]
Fixes: ce30d94e68 ("rust: add `io::{Io, IoRaw}` base types")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/rust-for-linux/0c844b70-19c7-4b14-ba29-fc99ae0d69f0@app.fastmail.com/ [1]
Link: https://github.com/Rust-for-Linux/linux/issues/1156 [2]
Link: https://lore.kernel.org/r/20250412005341.157150-1-fujita.tomonori@gmail.com
[ Reworded for relative paths. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Commit a97396c6eb ("PCI: pciehp: Ignore Link Down/Up caused by DPC")
amended PCIe hotplug to not bring down the slot upon Data Link Layer State
Changed events caused by Downstream Port Containment.
However Keith reports off-list that if the slot uses in-band presence
detect (i.e. Presence Detect State is derived from Data Link Layer Link
Active), DPC also causes a spurious Presence Detect Changed event.
This needs to be ignored as well.
Unfortunately there's no register indicating that in-band presence detect
is used. PCIe r5.0 sec 7.5.3.10 introduced the In-Band PD Disable bit in
the Slot Control Register. The PCIe hotplug driver sets this bit on
ports supporting it. But older ports may still use in-band presence
detect.
If in-band presence detect can be disabled, Presence Detect Changed events
occurring during DPC must not be ignored because they signal device
replacement. On all other ports, device replacement cannot be detected
reliably because the Presence Detect Changed event could be a side effect
of DPC. On those (older) ports, perform a best-effort device replacement
check by comparing the Vendor ID, Device ID and other data in Config Space
with the values cached in struct pci_dev. Use the existing helper
pciehp_device_replaced() to accomplish this. It is currently #ifdef'ed to
CONFIG_PM_SLEEP in pciehp_core.c, so move it to pciehp_hpc.c where most
other functions accessing config space reside.
Reported-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/fa264ff71952915c4e35a53c89eb0cde8455a5c5.1744298239.git.lukas@wunner.de
Enabling a (modular) test should not silently enable additional kernel
functionality, as that may increase the attack vector of a product.
Fix this by making PRIME_NUMBERS_KUNIT_TEST depend on PRIME_NUMBERS
instead of selecting it.
After this, one can safely enable CONFIG_KUNIT_ALL_TESTS=m to build
modules for all appropriate tests for ones system, without pulling in
extra unwanted functionality, while still allowing a tester to manually
enable PRIME_NUMBERS and this test suite on a system where PRIME_NUMBERS
is not enabled by default. Resurrect CONFIG_PRIME_NUMBERS=m in
tools/testing/selftests/lib/config for the latter use case.
Fixes: 313b38a6ec ("lib/prime_numbers: convert self-test to KUnit")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/40f8a40eef4930d3ac9febd205bc171eb04e171c.1744641237.git.geert@linux-m68k.org
Signed-off-by: Kees Cook <kees@kernel.org>
