The value returned by acpi_evaluate_integer() is not checked,
but the result is not always successful, so it is necessary to
add a check of the returned value.
If the result remains negative during three iterations of the loop,
then the uninitialized variable 'val' will be used in the clamp_val()
macro, so it must be initialized with the current value of the 'curr'
variable.
In this case, the algorithm should be less noisy.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b23910c219 ("asus-laptop: Pegatron Lucid accelerometer")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Link: https://lore.kernel.org/r/20250403122603.18172-1-arefev@swemel.ru
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Update firmware Boot API to 3.28.3 version and
adjust driver to API changes for preemption buffers.
Use new preemption buffer size fields from FW header added to
firmware boot API for preemption buffers allocations,
if those new fields are zeroed, use old values instead.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250401155817.4049220-1-maciej.falkowski@linux.intel.com
Use flush_work() instead of cancel_work_sync() for driver IRQ
workqueues to guarantee that remaining pending work
will be handled.
This resolves two issues that were encountered where a driver was left
in an incorrect state as the bottom-half was canceled:
1. Cancelling context-abort of a job that is still executing and
is causing translation faults which is going to cause additional TDRs
2. Cancelling bottom-half of a DCT (duty-cycle throttling) request
which will cause a device to not be adjusted to an external frequency
request.
Fixes: bc3e5f48b7 ("accel/ivpu: Use workqueue for IRQ handling")
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250401155755.4049156-1-maciej.falkowski@linux.intel.com
Hypercall detection is failing with xen_hypercall_intel() chosen even on
an AMD processor. Looking at the disassembly, the call to
xen_get_vendor() was removed.
The check for boot_cpu_has(X86_FEATURE_CPUID) was used as a proxy for
the x86_vendor having been set.
When CONFIG_X86_REQUIRED_FEATURE_CPUID=y (the default value), DCE eliminates
the call to xen_get_vendor(). An uninitialized value 0 means
X86_VENDOR_INTEL, so the Intel function is always returned.
Remove the if and always call xen_get_vendor() to avoid this issue.
Fixes: 3d37d9396e ("x86/cpufeatures: Add {REQUIRED,DISABLED} feature configs")
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Xin Li (Intel)" <xin@zytor.com>
Link: https://lore.kernel.org/r/20250410193106.16353-1-jason.andryuk@amd.com
Reference header files using their canonical form <linux/cacheinfo.h>.
Standardize on CPUID(0xN), instead of CPUID(N), for all standard leaves.
This removes ambiguity and aligns them with their extended counterparts
like CPUID(0x8000001d).
References: 0dd09e215a ("x86/cacheinfo: Apply maintainer-tip coding style fixes")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20250411070401.1358760-3-darwi@linutronix.de
The CPUID(0x2) cache descriptors iterator at <cpuid/leaf_0x2_api.h>:
for_each_leaf_0x2_desc()
has no more call sites. Remove it.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250411070401.1358760-2-darwi@linutronix.de
Simplify the alternatives interface some more by moving the
poke_batch_finish check into poke_batch_process and renaming the latter.
The net effect is one less function name to consider when reading the
code.
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-54-mingo@kernel.org
- Capitalize 'INT3' consistently,
- make it clear that 'sync cores' means an SMP sync to all CPUs,
- fix typos and spelling.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-51-mingo@kernel.org
It only has a single user left, merge it into smp_text_poke_batch_add()
and remove the helper function.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-50-mingo@kernel.org
Move it from the middle of a .c file next to the similar declarations
of __alt_instructions[] et al.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-49-mingo@kernel.org
We accumulated lots of unnecessary header inclusions over the years,
trim them.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-48-mingo@kernel.org
- No need to cast over to 'struct smp_text_poke_loc *', void * is just fine
for a binary search,
- Use the canonical (a, b) input parameter nomenclature of cmp_func_t
functions and rename the input parameters from (tp, elt) to
(tpl_a, tpl_b).
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-44-mingo@kernel.org
This will also allow the simplification of patch_cmp().
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-43-mingo@kernel.org
- Use direct 'void *' pointer comparison, there's no
need to force the type to 'unsigned long'.
- Remove the 'tp' local variable indirection
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-42-mingo@kernel.org
Unlike sync_core(), text_poke_sync() is a very heavy operation, as
it sends an IPI to every online CPU in the system and waits for
completion.
Reflect this in the name.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-41-mingo@kernel.org
At this point smp_text_poke_single(addr, opcode, len, emulate) is equivalent to:
smp_text_poke_batch_add(addr, opcode, len, emulate);
smp_text_poke_batch_finish();
So remove the restriction on mixing single-instruction patching
with multi-instruction patching.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-37-mingo@kernel.org
This function is now using the text_poke_array state exclusively,
make that explicit by removing the redundant input parameters.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-34-mingo@kernel.org
There's no need to return a pointer on success - it's always
the same pointer.
Return a bool instead.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-32-mingo@kernel.org
Just like with try_get_text_poke_array(), this name better reflects
what the underlying code is doing, there's no 'descriptor'
indirection anymore.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-31-mingo@kernel.org
At this point we are always working out of an uptodate
text_poke_array, there's no need for smp_text_poke_int3_handler()
to read via the int3_vec indirection - remove it.
This simplifies the code:
1 file changed, 5 insertions(+), 15 deletions(-)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-29-mingo@kernel.org
struct text_poke_array is an equivalent structure to these global variables:
static struct smp_text_poke_loc tp_vec[TP_VEC_MAX];
static int tp_vec_nr;
Note that we intentionally mirror much of the naming of
'struct text_poke_int3_vec', which will further highlight
the unecessary layering going on in this code, and will
ease its removal.
No change in functionality.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-28-mingo@kernel.org
At this point the 'tp' input parameter must always be the
global 'tp_vec' array, and 'nr_entries' must always be equal
to 'tp_vec_nr'.
Assert these conditions - which will allow the removal of
a layer of indirection between these values.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-27-mingo@kernel.org
Instead of constructing a vector on-stack, just use the already
available batch-patching vector - which should always be empty
at this point.
This will allow subsequent simplifications.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-25-mingo@kernel.org
There's this weird hack used by smp_text_poke_batch_finish() to indicate
a 'forced flush':
smp_text_poke_batch_flush(NULL);
Just open-code the vector-flush in a straightforward fashion:
smp_text_poke_batch_process(tp_vec, tp_vec_nr);
tp_vec_nr = 0;
And get rid of !addr hack from text_poke_addr_ordered().
Leave a WARN_ON_ONCE(), just in case some external code learned
to rely on this behavior.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-24-mingo@kernel.org
tp_order_fail() uses inverted logic: it returns true in case something
is false, which is only a plus at the IOCCC.
Instead rename it to regular parity as 'text_poke_addr_ordered()',
and adjust the code accordingly.
Also add a comment explaining how the address ordering should be
understood.
No change in functionality intended.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-23-mingo@kernel.org
It's possible to escape the text_mutex-held assert in
smp_text_poke_batch_process() if the caller uses a properly
batched and sorted series of patch requests, so add
an explicit lockdep_assert_held() to make sure it's
held by all callers.
All text_poke_int3_*() APIs will call either smp_text_poke_batch_process()
or smp_text_poke_batch_flush() internally.
The text_mutex must be held, because tp_vec and tp_vec_nr et al
are all globals, and the INT3 patching machinery itself relies on
external serialization.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-22-mingo@kernel.org
Make it clear that this structure is part of the INT3 based
SMP patching facility, not the regular text_poke*() MM-switch
based facility.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-19-mingo@kernel.org
This name is actively confusing as well, because the simple text_poke*()
APIs use MM-switching based code patching, while text_poke_loc_init()
is part of the INT3 based text_poke_int3_*() machinery that is an
additional layer of functionality on top of regular text_poke*() functionality.
Rename it to text_poke_int3_loc_init() to make it clear which layer
it belongs to.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-18-mingo@kernel.org
This name is actively confusing as well, because the simple text_poke*()
APIs use MM-switching based code patching, while text_poke_queue()
is part of the INT3 based text_poke_int3_*() machinery that is an
additional layer of functionality on top of regular text_poke*() functionality.
Rename it to smp_text_poke_batch_add() to make it clear which layer
it belongs to.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-17-mingo@kernel.org
This name is actively confusing as well, because the simple text_poke*()
APIs use MM-switching based code patching, while text_poke_finish()
is part of the INT3 based text_poke_int3_*() machinery that is an
additional layer of functionality on top of regular text_poke*() functionality.
Rename it to smp_text_poke_batch_finish() to make it clear which layer
it belongs to.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-16-mingo@kernel.org
This name is actually actively confusing, because the simple text_poke*()
APIs use MM-switching based code patching, while text_poke_flush()
is part of the INT3 based text_poke_int3_*() machinery that is an
additional layer of functionality on top of regular text_poke*() functionality.
Rename it to smp_text_poke_batch_flush() to make it clear which layer
it belongs to.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-15-mingo@kernel.org
So the temp_mm_state_t abstraction used by use_temporary_mm() and
unuse_temporary_mm() is super confusing:
- The whole machinery is about temporarily switching to the
text_poke_mm utility MM that got allocated during bootup
for text-patching purposes alone:
temp_mm_state_t prev;
/*
* Loading the temporary mm behaves as a compiler barrier, which
* guarantees that the PTE will be set at the time memcpy() is done.
*/
prev = use_temporary_mm(text_poke_mm);
- Yet the value that gets saved in the temp_mm_state_t variable
is not the temporary MM ... but the previous MM...
- Ie. we temporarily put the non-temporary MM into a variable
that has the temp_mm_state_t type. This makes no sense whatsoever.
- The confusion continues in unuse_temporary_mm():
static inline void unuse_temporary_mm(temp_mm_state_t prev_state)
Here we unuse an MM that is ... not the temporary MM, but the
previous MM. :-/
Fix up all this confusion by removing the unnecessary layer of
abstraction and using a bog-standard 'struct mm_struct *prev_mm'
variable to save the MM to.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-14-mingo@kernel.org
The idtentry macro in entry_64.S hasn't had a create_gap
option for 5 years - update the comment.
(Also clean up the entire comment block while at it.)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-13-mingo@kernel.org
Put it into the text_poke_* namespace of <asm/text-patching.h>.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-10-mingo@kernel.org