If device wedges on e.g. GuC upload, the submission is not yet enabled
and the state is not even initialized. Protect the wedge call so it does
nothing in this case. It fixes the following splat:
[] xe 0000:bf:00.0: [drm] device wedged, needs recovery
[] ------------[ cut here ]------------
[] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[] WARNING: CPU: 48 PID: 312 at kernel/locking/mutex.c:564 __mutex_lock+0x8a1/0xe60
...
[] RIP: 0010:__mutex_lock+0x8a1/0xe60
[] mutex_lock_nested+0x1b/0x30
[] xe_guc_submit_wedge+0x80/0x2b0 [xe]
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://lore.kernel.org/r/20250402-warn-after-wedge-v1-1-93e971511fa5@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Merge series from From git@z Thu Jan 1 00:00:00 1970
Peng Fan <peng.fan@nxp.com>:
Update the driver to fetch buck_gpio and buck_ds as GPIO descriptors.
Then drop the usage of 'of_gpio.h' which should be deprecated.
Based on commit 84618d5e31 ("regulator: max8997:
Convert to GPIO descriptors") as a reference to make the changes.
With the quirk fix for s5m8767 in of_gpio_try_fixup_polarity,
the polarity will be active-high, even if exynos5250 spring DTS
wrongly use active-low polarity. So using GPIO descriptors,
it should work as before.
Commit b4b05e53b5 ("drm/xe/guc_pc: Retry and wait longer for GuC PC
start"), leads to the following Smatch static checker warning:
drivers/gpu/drm/xe/xe_guc_pc.c:1073 xe_guc_pc_start()
warn: missing error code here? '_dev_err()' failed. 'ret' = '0'
Fixes: c605acb53f ("drm/xe/guc_pc: Retry and wait longer for GuC PC start")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/intel-xe/1454a5f1-ee18-4df1-a6b2-a4a3dddcd1cb@stanley.mountain/
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250328181752.26677-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 3f2bdccbcc)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Historically, the Vertex Fetcher unit has not been an L3 client. That
meant that, when a buffer containing vertex data was written to, it was
necessary to issue a PIPE_CONTROL::VF Cache Invalidate to invalidate any
VF L2 cachelines associated with that buffer, so the new value would be
properly read from memory.
Since Tigerlake and later, VERTEX_BUFFER_STATE and 3DSTATE_INDEX_BUFFER
have included an "L3 Bypass Enable" bit which userspace drivers can set
to request that the vertex fetcher unit snoop L3. However, unlike most
true L3 clients, the "VF Cache Invalidate" bit continues to only
invalidate the VF L2 cache - and not any associated L3 lines.
To handle that, PIPE_CONTROL has a new "L3 Read Only Cache Invalidation
Bit", which according to the docs, "controls the invalidation of the
Geometry streams cached in L3 cache at the top of the pipe." In other
words, the vertex and index buffer data that gets cached in L3 when
"L3 Bypass Disable" is set.
Mesa always sets L3 Bypass Disable so that the VF unit snoops L3, and
whenever it issues a VF Cache Invalidate, it also issues a L3 Read Only
Cache Invalidate so that both L2 and L3 vertex data is invalidated.
xe is issuing VF cache invalidates too (which handles cases like CPU
writes to a buffer between GPU batches). Because userspace may enable
L3 snooping, it needs to issue an L3 Read Only Cache Invalidate as well.
Fixes significant flickering in Firefox on Meteorlake, which was writing
to vertex buffers via the CPU between batches; the missing L3 Read Only
invalidates were causing the vertex fetcher to read stale data from L3.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4460
Fixes: 6ef3bb6055 ("drm/xe: enable lite restore")
Cc: stable@vger.kernel.org # v6.13+
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250330165923.56410-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 61672806b5)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Building the xe driver for i386 results in a link time warning:
x86_64-linux-ld: drivers/gpu/drm/xe/xe_migrate.o: in function `xe_migrate_vram':
xe_migrate.c:(.text+0x1e15): undefined reference to `__udivdi3'
Avoid this by using DIV_U64_ROUND_UP() instead of DIV_ROUND_UP(). The driver
is unlikely to be used on 32=bit hardware, so the extra cost here is not
too important.
Fixes: 9c44fd5f6e ("drm/xe: Add migrate layer functions for SVM support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250324210612.2927194-1-arnd@kernel.org
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit c909225750)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Sysfs_ops needs to be defined on all directories which
can have attr files with set/get method. Add sysfs_ops
to even those directories which is currently empty but
would have attr files with set/get method in future.
Leave .default with default sysfs_ops as it will never
have setter method.
V2(Himal/Rodrigo):
- use single sysfs_ops for all dir and attr with set/get
- add default ops as ./default does not need runtime pm at all
Fixes: 3f0e14651a ("drm/xe: Runtime PM wake on every sysfs call")
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250327122647.886637-1-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit 40780b9760)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The intent of the error path in xe_migrate_clear is to wait on locally
generated fence and then return. The code is waiting on m->fence which
could be the local fence but this is only stable under the job mutex
leading to a possible UAF. Fix code to wait on local fence.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250311182915.3606291-1-matthew.brost@intel.com
(cherry picked from commit 762b7e9536)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Extend Wa_14022293748, Wa_22019794406 to Xe3_LPG
Signed-off-by: Julia Filipchuk <julia.filipchuk@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250325224310.1455499-1-julia.filipchuk@intel.com
(cherry picked from commit 32af900f2c)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The RCU_MODE_FIXED_SLICE_CCS_MODE setting is not getting invoked
in the gt reset path after the ccs_mode setting by the user.
Add it to engine register update list (in hw_engine_setup_default_state())
which ensures it gets set in the gt reset and engine reset paths.
v2: Add register update to engine list to ensure it gets updated
after engine reset also.
Fixes: 0d97ecce16 ("drm/xe: Enable Fixed CCS mode setting")
Cc: stable@vger.kernel.org
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250327185604.18230-1-niranjana.vishwanathapura@intel.com
(cherry picked from commit 12468e519f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
If drm_gpusvm_migrate_to_devmem() succeeds, if a cpu access happens to the
range the bo may be freed before xe_bo_unlock(), causing a UAF.
Since the reference is transferred, use xe_svm_devmem_release() to
release the reference on drm_gpusvm_migrate_to_devmem() failure,
and hold a local reference to protect the UAF.
Fixes: 2f118c9491 ("drm/xe: Add SVM VRAM migration")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250326080551.40201-3-thomas.hellstrom@linux.intel.com
(cherry picked from commit c9db07cab7)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
One additional BMG PCI ID has been added to the spec; make sure our
driver recognizes devices with this ID properly.
Bspec: 68090
Cc: stable@vger.kernel.org # v6.12+
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250325224709.4073080-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit cca9734ebe)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
ath12k-check is flagging:
drivers/net/wireless/ath/ath12k/dp.c:1656: 'upto' may be misspelled - perhaps 'up to'?
Replace "upto" with "up to" and split the comment line so that it
doesn't exceed 80 columns.
Link: https://patch.msgid.link/20250407-upto-v1-1-23ca65f2ccdf@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Add missing colon in kernel-doc for DC_DEBUG_MASK enum.
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the below comment warning
drivers/gpu/drm/amd/amdgpu/amdgpu_sdma.c:541:
warning: Function parameter or struct member 'adev'
not described in 'amdgpu_sdma_register_on_reset_callbacks'
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the right register offsets for getting link status.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Static analysis shows that pointer "timing" cannot be NULL because it
points to the object "struct dc_crtc_timing".
Remove the extra NULL check. It is meaningless and harms the readability
of the code.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If RAS header read from EEPROM is corrupted, it could result in trying
to allocate huge memory for reading the records. Add some validation to
header fields.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove workaround code for the early engineering
samples GC v9.4.3 SOCs with revID 0
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Apurv Mishra <Apurv.Mishra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Removed unused function mpc401_get_3dlut_fast_load_status.
Signed-off-by: James Flowers <bold.zone2373@fastmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that we are using the proper defines, cleanup useless old "substituted" defines.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace defines by the ones added earlier to GFX6, SMU6 and DCE6
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace defines for the ones under smu_6_0_d.h and smu_6_0_sh_mask.h
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enabling VCN FW workaround for drm key injection through shared
memory for vcn 4_0_5
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VFs on some IP versions are unable to access this register directly.
This register must be programmed before PSP ring is setup,
so use PSP VF mailbox directly. PSP will broadcast the register
value to all VF assigned instances.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <Zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement the GFX12 kgq pipe reset, and temporarily disable
the GFX12 pipe reset until the CPFW fully support it.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They will be used later when switching away from sid.h/si_enums.h.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The function atomctrl_initialize_mc_reg_table() and
atomctrl_initialize_mc_reg_table_v2_2() does not check the return
value of smu_atom_get_data_table(). If smu_atom_get_data_table()
fails to retrieve vram_info, it returns NULL which is later
dereferenced.
Fixes: b3892e2bb5 ("drm/amd/pp: Use atombios api directly in powerplay (v2)")
Fixes: 5f92b48cf6 ("drm/amd/pm: add mc register table initialization")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement the kernel graphics queue pipe reset,and the driver
will fallback to pipe reset when the queue reset fails. However,
the ME FW hasn't fully supported pipe reset yet so disable the
KGQ pipe reset temporarily.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
- VUPDATE_NO_LOCK should be used in place of VUPDATE always
- Add VERTICAL_INTERRUPT1 and VERTICAL_INTERRUPT2 definitions
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit fe45e2af4a.
Reason for revert: it causes stuttering in some usecases.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
DCN401 uses a different structure to store the VStartup offset used to
calculate the VUpdate position, so adjust the calculations to use this
value.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In the mode validation, mst dsc is considered for bw calculation after
common dsc config is determined. Currently it considered common dsc config
is found if max and min target bpp are non zero which is not accurate. Invalid
max and min target bpp values would not get max_kbps and min_kbps calculated,
leading to falsefully pass a mode that does not have valid dsc parameters
available.
[how]
Use the return value of decide_dsc_bandwidth_range() to determine whether valid
dsc common config is found or not. Prune out modes that do not have valid common
dsc config determined.
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
DCN4+ supports a new register based mailbox for sending messages
from host to DMCUB. This mailbox supports 64 byte commands, which makes
it compatible with the same structure as the frame buffer based mailbox.
[HOW]
The intention for reg_inbox0 is to be slot in replacement for the frame
buffer based mailbox (Inbox1). It supports all of the required features:
- Supports all messages handled by FB Inbox1
- Supports multi command batching
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Replay need special policy for the scenario Teams,
add a flag to imply apply special policy or not.
[How]
Add a config option intended for future use for video conferencing applications.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: ChunTao Tso <ChunTao.Tso@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_warn prints the drm device instance which is helpful when
debugging multi gpu issues
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm_info prints the drm device instance which is helpful when
debugging multi gpu issues
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Core should evaluate support based on the max clocks after considering
downspread.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This array was initially defined as size 50. There were array overflow
issues so the size was increased to 100. To ensure such issues are
avoided in the future, the size should be set based on the possible
contents instead of an arbitrary value.
[How]
- upper bound, assume every update occurs on max number of pipes
- define array sizes for function parameters, for static analysis
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Mapping of ODM enum is different for DML2.0 vs DML2.1.
Configs using DML2.1 will incorrectly trigger an assert meant for DML2.0.
[How]
Use if/else to seperate logic between DML2.0 and DML2.1.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
prefer drm_err instead of DRM_ERROR since the former prints the
associated DRM device, which is helpful when debugging multi-gpu
use cases.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
make the drm device available in create_validate_stream_for_sink()
so that drm_err() can be used
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
add amdgpu_device pointer to data associated with the work struct
such that hpd handlers has access to the drm device for use with
drm_err()
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pass in a pointer to amdgpu_device directly to the function.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use gpu_metrics_v1_8 for smu_v13_0_12 to fill metrics data
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use gpu_metrics_v1_8 for smu_v13_0_6 to fill metrics data
v2: Move exposing caps to separate patch, move smu_v13.0.12 gpu metrics
1.8 usage to separate patch (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose smu_v13_0_6 caps by moving it to common header
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
