clk_disable_unprepare() already checks NULL by using IS_ERR_OR_NULL.
Remove unneeded NULL check for clk here.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patch.msgid.link/20250325032226.603963-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 2fef64eec2 ("ASoC: hdmi-codec: Add a prepare hook") added a
prepare implementation. Back then the new callback was only integrated
with hdmi_codec_i2s_dai_ops (which is used by the I2S input code-path).
It was not added to hdmi_codec_spdif_dai_ops (which is used by the SPDIF
input code-path).
With commit baf616647f ("drm/connector: implement generic HDMI audio
helpers") the DRM subsystem has gained a helper framework which can be
used by HDMI controller drivers. HDMI controller drivers are often
tightly coupled with the hdmi-codec because of the so-called HDMI audio
infoframe (which is often managed by the display controller).
To allow the new DRM HDMI audio framework to work with the hdmi-codec
driver for SPDIF inputs we also need to hook up the prepare callback to
hdmi_codec_spdif_dai_ops. Just hooking into the hw_params callback would
not be enough as hw_params (is called too early and) doesn't have access
to the HDMI audio infoframe contents.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250329191433.873237-1-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use secs_to_jiffies() instead of msecs_to_jiffies() and avoid scaling
'delay' to milliseconds.
Since 'delay' isn't a compile-time constant, secs_to_jiffies() expands
to much simpler code compared to msecs_to_jiffies(), reducing the size
of 'snd-soc-rt5677-spi.ko' by 472 bytes.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20250405125808.302259-1-thorsten.blum@linux.dev
Signed-off-by: Mark Brown <broonie@kernel.org>
This config was used by bxt_da7219_max98357a and kbl_da7219_max98357a,
both were removed.
Now it is not used anymore, so remove it.
Signed-off-by: Helen Koike <koike@igalia.com>
Link: https://patch.msgid.link/20250403130242.1227770-1-koike@igalia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Reference the dai-common.yaml schema to allow '#sound-dai-cells' and
"sound-name-prefix' to be used.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250328021339.1593635-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Coding style and common logic dictates that headers should not be
included in device nodes. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250324125131.81867-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
pcim_iomap_table() and pcim_iomap_regions() have been deprecated.
Replace them with pcim_iomap_region().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20250404121911.85277-13-phasta@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
clk_prepare_enable() and clk_disable_unprepare() already checked
NULL clock parameter.Remove unneeded NULL check for clk here.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20250325092640.996802-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Utilize card->deferrable flag to support delayed card enumeration -
scenario where snd_soc_register_card() occurs before all the required
card components are registered into the framework.
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250404101622.3673850-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit e894efef9a ("ASoC: core: add support to card rebind")
there is a support for card rebind. The support is only partial though.
Let's consider the following scenarios both of which aim to enumerate a
sound card:
1)
snd_soc_add_component(comp1);
(...)
snd_soc_register_card(card1);
2)
snd_soc_register_card(card1);
(...)
snd_soc_add_component(comp1);
For the sake of simplicity, let comp1 be the last dependency needed for
the card1 to enumerate.
Case 1) will end up succeeding whereas 2) is a certain fail -
snd_soc_bind_card() does not honor unbind_card_list so even a non-fatal
return code of EPROBE_DEFER will cause the card to collapse. Given the
typical usecase of platform_device serving as a card->dev and its
probe() ending with:
int carddev_probe(struct platform_device *pdev)
{
(...)
return devm_snd_soc_register_card(dev, card);
}
failure to register card triggers device_unbind_cleanup() -
really_probe() in dd.c.
To allow for card registration to be deferred while being friendly
towards existing users of devm_snd_soc_register_card(), add new
card->devres_dev field, and devm_xxx() variants for card registration:
devm_snd_soc_register_deferrable_card() (external)
devm_snd_soc_bind_card() (internal)
In essence, if requested, devm_snd_soc_bind_card() replaces
snd_soc_bind_card(). The rebind procedure takes care of destroying
old devres before attempting the new bind. This makes sure nothing is
left hanging if binding fails and card becomes unbound but is still
registered to the ASoC framework.
To allow snd_soc_bind_card() to be reused by the deferrable friends,
move 'client_mutex' locking to the function's callers and select between
devm_xxx and non-devm_xxx variants of snd_soc_bind_card() based on
card->devres_dev.
On top of the feature, the refactoring brings two benefits:
a) single lock/unlock of 'client_mutex' in snd_soc_add_component()
instead of ambiguous unlock and immediate lock in
snd_soc_try_rebind_card()
b) all unbind_card_list manipulations done under 'client_mutex'
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20250404101622.3673850-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the open-code with dev_err_probe() to simplify the code.
Signed-off-by: Zhang Enpei <zhang.enpei@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Link: https://patch.msgid.link/20250403154142936Po-soX8Bifyvw_eWSbddT@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
On some platforms to minimise pop and click during switching between
CTIA and OMTP headset an additional HiFi mux is used. Most common
case is that this switch is switched on by default, but on some
platforms this needs a regulator enable.
move to using mux control to enable both regulator and handle gpios,
deprecate the usage of gpio.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Christopher Obbard <christopher.obbard@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250327100633.11530-6-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On some platforms to minimise pop and click during switching between
CTIA and OMTP headset an additional HiFi mux is used. Most common
case is that this switch is switched on by default, but on some
platforms this needs a regulator enable.
Move to using mux-controls so that both the gpio and regulators can be
driven correctly, rather than adding regulator handing in the codec.
This patch adds required bindings to add such mux controls.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250327100633.11530-5-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove confusing and unused argument in swap_gnd_mic api, the second
argument active is not really used, and always set to true in the mbhc
drivers.
The callback itself is used to toggle the gnd_mic lines when a cross
connection is detected by mbhc circuits, so there is no need of this
argument.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250327100633.11530-4-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The transmitter and receiver of SAI can be used for different slot number
and slot width configuration, so refine fsl_sai_set_dai_tdm_slot(), add
fsl_sai_set_dai_tdm_slot_tx() for tx and fsl_sai_set_dai_tdm_slot_rx()
for rx.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250328085744.1893434-5-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The transmitter and receiver of SAI can be used for different dsp modes,
then 'is_dsp_mode' needs to be separated.
Expand 'is_dsp_mode' to array 'is_dsp_mode[]' to support different
configuration of tx and rx.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250328085744.1893434-4-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With DPCM case, for example ASRC->SAI->AMIX, the SAI can be codec dai
device in backend, but __soc_pcm_hw_params() will get the tdm_mask
for channel constraint, tdm_mask is set by snd_soc_dai_set_tdm_slot()
from slot number, but SAI supports flexible channel number with fixed slot
number, so add an empty xlate_tdm_slot_mask() callback to avoid the
channel constraint in __soc_pcm_hw_params().
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250328085744.1893434-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If clk_id is zero, it means FSL_SAI_CLK_BUS in fsl_sai_set_dai_sysclk(),
as the clk[FSL_SAI_CLK_BUS]'s rate can't be changed, there is no rate
changed for mclk.
But with audio-graph-card, the clk_id is always zero, in order to allow
to set mclk rate with zero clk_id, update the condition to be if clk_id is
zero, then set the FSL_SAI_CLK_MAST1's rate. This would not change the
original function for master mode.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250328085744.1893434-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
- Use dev_gpiod_get to get GPIO descriptor.
- Use gpiod_set_value to configure output value.
With legacy of_gpio API, the driver set gpio value 0 to assert reset,
and 1 to deassert reset. And the reset-gpios use GPIO_ACTIVE_LOW flag in
DTS, so set GPIOD_OUT_LOW when get GPIO descriptors, and set value 1 means
output low, set value 0 means output high with gpiod API.
The in-tree DTS files have the right polarity set up already so we can
expect this to "just work"
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250324-wcd-gpiod-v2-3-773f67ce3b56@nxp.com
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
- Use dev_gpiod_get to get GPIO descriptor.
- Use gpiod_set_value to configure output value.
With legacy of_gpio API, the driver set gpio value 0 to assert reset,
and 1 to deassert reset. And the reset-gpios use GPIO_ACTIVE_LOW flag in
DTS, so set GPIOD_OUT_LOW when get GPIO descriptors, and set value 1 means
output low, set value 0 means output high with gpiod API.
The in-tree DTS files have the right polarity set up already so we
can expect this to "just work".
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Link: https://patch.msgid.link/20250324-wcd-gpiod-v2-2-773f67ce3b56@nxp.com
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
- Use dev_gpiod_get to get GPIO descriptor.
- Use gpiod_set_value to configure output value.
With legacy of_gpio API, the driver set gpio value 0 to assert reset,
and 1 to deassert reset. And the reset-gpios use GPIO_ACTIVE_LOW flag in
DTS, so set GPIOD_OUT_LOW when get GPIO descriptors, and set value 1 means
output low, set value 0 means output high with gpiod API.
The in-tree DTS files have the right polarity set up already so we
can expect this to "just work".
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250324-wcd-gpiod-v2-1-773f67ce3b56@nxp.com
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_kasprintf() returns NULL when memory allocation fails. Currently,
avs_component_probe() does not check for this case, which results in a
NULL pointer dereference.
Fixes: 739c031110 ("ASoC: Intel: avs: Provide support for fallback topology")
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://patch.msgid.link/20250402141411.44972-1-bsdhenrymartin@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With audio graph card, original cpu dai is changed to codec device in
backend, so if cpu dai is dummy device in backend, get the codec dai
device, which is the real hardware device connected.
The specific case is ASRC->SAI->AMIX->CODEC.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250319033504.2898605-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Case values introduced in commit
5f78e1fb7a ("ASoC: qcom: Add driver support for audioreach solution")
cause out of bounds access in arrays of sc7280 driver data (e.g. in case
of RX_CODEC_DMA_RX_0 in sc7280_snd_hw_params()).
Redefine LPASS_MAX_PORTS to consider the maximum possible port id for
q6dsp as sc7280 driver utilizes some of those values.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 77d0ffef79 ("ASoC: qcom: Add macro for lpass DAI id's max limit")
Cc: stable@vger.kernel.org # v6.0+
Suggested-by: Mikhail Kobuk <m.kobuk@ispras.ru>
Suggested-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Evgeny Pimenov <pimenoveu12@gmail.com>
Link: https://patch.msgid.link/20250401204058.32261-1-pimenoveu12@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit a42e988 ("ASoC: dwc: add DMA handshake control") changed the
behavior of the driver to not enable or disable i2s irqs if using DMA. This
breaks platforms such as AMD ACP. Audio playback appears to work but no
audio can be heard. Revert to the old behavior by always enabling and
disabling i2s irqs while keeping DMA handshake control.
Fixes: a42e988b62 ("ASoC: dwc: add DMA handshake control")
Signed-off-by: Brady Norander <bradynorander@gmail.com>
Link: https://patch.msgid.link/20250330130852.37881-3-bradynorander@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Existing code only configures one of WSA_MACRO_TX0 or WSA_MACRO_TX1
paths eventhough we enable both of them. Fix this bug by adding proper
checks and rearranging some of the common code to able to allow setting
both TX0 and TX1 paths
Without this patch only one channel gets enabled in VI path instead of 2
channels. End result would be 1 channel recording instead of 2.
Fixes: 2c4066e5d4 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route")
Cc: stable@vger.kernel.org
Co-developed-by: Manikantan R <quic_manrav@quicinc.com>
Signed-off-by: Manikantan R <quic_manrav@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250403160209.21613-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the VI feedback rate is set to fixed 8K, fix this by getting
the correct rate from params_rate.
Without this patch incorrect rate will be set on the VI feedback
recording resulting in rate miss match and audio artifacts.
Fixes: 2c4066e5d4 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route")
Cc: stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250403160209.21613-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The "real" linux/types.h UAPI header gracefully degrades to a NOOP when
included from assembly code.
Mirror this behaviour in the tools/ variant.
Test for __ASSEMBLER__ over __ASSEMBLY__ as the former is provided by the
toolchain automatically.
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/lkml/af553c62-ca2f-4956-932c-dd6e3a126f58@sirena.org.uk/
Fixes: c9fbaa8795 ("selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://patch.msgid.link/20250321-uapi-consistency-v1-1-439070118dc0@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Support up to 8192 processors
Add cpuidle governor debug telemetry, disabled by default
Update default output to exclude cpuidle invocation counts
Bug fixes
Signed-off-by: Len Brown <len.brown@intel.com>
Move the get_ctx(child_ctx) call and the child_event->ctx assignment to
occur immediately after the child event is allocated. Ensure that
child_event->ctx is non-NULL before any subsequent error path within
inherit_event calls free_event(), satisfying the assumptions of the
cleanup code.
Details:
There's no clear Fixes tag, because this bug is a side-effect of
multiple interacting commits over time (up to 15 years old), not
a single regression.
The code initially incremented refcount then assigned context
immediately after the child_event was created. Later, an early
validity check for child_event was added before the
refcount/assignment. Even later, a WARN_ON_ONCE() cleanup check was
added, assuming event->ctx is valid if the pmu_ctx is valid.
The problem is that the WARN_ON_ONCE() could trigger after the initial
check passed but before child_event->ctx was assigned, violating its
precondition. The solution is to assign child_event->ctx right after
its initial validation. This ensures the context exists for any
subsequent checks or cleanup routines, resolving the WARN_ON_ONCE().
To resolve it, defer the refcount update and child_event->ctx assignment
directly after child_event->pmu_ctx is set but before checking if the
parent event is orphaned. The cleanup routine depends on
event->pmu_ctx being non-NULL before it verifies event->ctx is
non-NULL. This also maintains the author's original intent of passing
in child_ctx to find_get_pmu_context before its refcount/assignment.
[ mingo: Expanded the changelog from another email by Gabriel Shahrouzi. ]
Reported-by: syzbot+ff3aa851d46ab82953a3@syzkaller.appspotmail.com
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20250405203036.582721-1-gshahrouzi@gmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ff3aa851d46ab82953a3
Create "pct_idle" counter group, the sofware notion of residency
so it can now be singled out, independent of other counter groups.
Create "cpuidle" group, the cpuidle invocation counts.
Disable "cpuidle", by default.
Create "swidle" = "cpuidle" + "pct_idle".
Undocument "sysfs", the old name for "swidle", but keep it working
for backwards compatibilty.
Create "hwidle", all the HW idle counters
Modify "idle", enabled by default
"idle" = "hwidle" + "pct_idle" (and now excludes "cpuidle")
Signed-off-by: Len Brown <len.brown@intel.com>
Linus expressed a strong preference for arch-specific asm code (i.e.,
virtually all of it) to reside under arch/ rather than anywhere else.
So move the EFI mixed mode startup code back, and put it under
arch/x86/boot/startup/ where all shared x86 startup code is going to
live.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20250401133416.1436741-11-ardb+git@google.com
The 5-level paging trampoline is used by both the EFI stub and the
traditional decompressor. Move it out of the decompressor sources into
the newly minted arch/x86/boot/startup/ sub-directory which will hold
startup code that may be shared between the decompressor, the EFI stub
and the kernel proper, and needs to tolerate being called during early
boot, before the kernel virtual mapping has been created.
This will allow the 5-level paging trampoline to be used by EFI boot
images such as zboot that omit the traditional decompressor entirely.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250401133416.1436741-10-ardb+git@google.com
Merge the local include "pgtable.h" -which declares the API of the
5-level paging trampoline- into <asm/boot.h> so that its implementation
in la57toggle.S as well as the calling code can be decoupled from the
traditional decompressor.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250401133416.1436741-9-ardb+git@google.com
Atomic instructions such as 'ldset' in the guest have been observed to
cause an EL1 data abort with FSC 0x35 (IMPLEMENTATION DEFINED fault
(Unsupported Exclusive or Atomic access)) on Neoverse-N3.
Per DDI0487L.a B2.2.6, atomic instructions are only architecturally
guaranteed for Inner/Outer Shareable Normal Write-Back memory. For
anything else the behavior is IMPLEMENTATION DEFINED and can lose
atomicity, or, in this case, generate an abort.
It would appear that selftests sets up the stage-1 mappings as Non
Shareable, leading to the observed abort. Explicitly set the
Shareability field to Inner Shareable for non-LPA2 page tables. Note
that for the LPA2 page table format, translations for cacheable memory
inherit the shareability attribute of the PTW, i.e. TCR_ELx.SH{0,1}.
Suggested-by: Oliver Upton <oupton@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20250405001042.1470552-3-rananta@google.com
[oliver: Rephrase changelog]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The kvm selftest library for arm64 currently configures the hardware
fields, such as shift and mask in the page-table entries and registers,
directly with numbers. While it add comments at places, it's better to
rewrite them with appropriate macros to improve the readability and
reduce the risk of errors. Hence, introduce macros to define the
hardware fields and use them in the arm64 processor library.
Most of the definitions are primary copied from the Linux's header,
arch/arm64/include/asm/pgtable-hwdef.h.
No functional change intended.
Suggested-by: Oliver Upton <oupton@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20250405001042.1470552-2-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
LOAD_PHYSICAL_ADDR is calculated as an aligned (up) CONFIG_PHYSICAL_START
with the respective alignment value CONFIG_PHYSICAL_ALIGN. However,
the code is written openly while we have __ALIGN_KERNEL_MASK() macro
that does the same. This macro has nothing special, that's why
it may be used in assembler code or linker scripts (on the contrary
__ALIGN_KERNEL() may not). Do it so.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250404165303.3657139-1-andriy.shevchenko@linux.intel.com
Add some missing dependencies to the CPUID dependency table:
- All the AMX features depend on AMX_TILE
- All the SPEC_CTRL features depend on SPEC_CTRL
[ mingo: Keep the AMX part of the table grouped ... ]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Ahmed S. Darwish <darwi@linutronix.de>
Link: https://lore.kernel.org/r/20240924170128.2611854-1-ak@linux.intel.com
... and don't error out so hard on missing module descriptions.
Before commit 6c6c1fc09d ("modpost: require a MODULE_DESCRIPTION()")
we used to warn about missing module descriptions, but only when
building with extra warnigns (ie 'W=1').
After that commit the warning became an unconditional hard error.
And it turns out not all modules have been converted despite the claims
to the contrary. As reported by Damian Tometzki, the slub KUnit test
didn't have a module description, and apparently nobody ever really
noticed.
The reason nobody noticed seems to be that the slub KUnit tests get
disabled by SLUB_TINY, which also ends up disabling a lot of other code,
both in tests and in slub itself. And so anybody doing full build tests
didn't actually see this failre.
So let's disable SLUB_TINY for build-only tests, since it clearly ends
up limiting build coverage. Also turn the missing module descriptions
error back into a warning, but let's keep it around for non-'W=1'
builds.
Reported-by: Damian Tometzki <damian@riscv-rocks.de>
Link: https://lore.kernel.org/all/01070196099fd059-e8463438-7b1b-4ec8-816d-173874be9966-000000@eu-central-1.amazonses.com/
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Fixes: 6c6c1fc09d ("modpost: require a MODULE_DESCRIPTION()")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Probe cpuidle "sysfs" residency and counts separately,
since soon we will make one disabled on, and the
other disabled off.
Clarify that some BIC (build-in-counters) are actually "groups".
since we're about to re-name some of those groups.
no functional change.
Signed-off-by: Len Brown <len.brown@intel.com>
Do fflush() to discard the buffered data, before each read of the
graphics sysfs knobs.
Fixes: ba99a4fc8c ("tools/power turbostat: Remove unnecessary fflush() call")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Document that on Intel Granite Rapids Systems,
Uncore domains 0-2 are CPU domains, and
uncore domains 3-4 are IO domains.
Signed-off-by: Len Brown <len.brown@intel.com>
The CoreThr column displays total thermal throttling events
since boot time.
Change it to report events during the measurement interval.
This is more useful for showing a user the current conditions.
Total events since boot time are still available to the user via
/sys/devices/system/cpu/cpu*/thermal_throttle/*
Document CoreThr on turbostat.8
Fixes: eae97e053f ("turbostat: Support thermal throttle count print")
Reported-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: Chen Yu <yu.c.chen@intel.com>
On systems with >= 1024 cpus (in my case 1152), turbostat fails with the error output:
"turbostat: /sys/fs/cgroup/cpuset.cpus.effective: cpu str malformat 0-1151"
A similar error appears with the use of turbostat --cpu when the inputted cpu
range contains a cpu number >= 1024:
# turbostat -c 1100-1151
"--cpu 1100-1151" malformed
...
Both errors are caused by parse_cpu_str() reaching its limit of CPU_SUBSET_MAXCPUS.
It's a good idea to limit the maximum cpu number being parsed, but 1024 is too low.
For a small increase in compute and allocated memory, increasing CPU_SUBSET_MAXCPUS
brings support for parsing cpu numbers >= 1024.
Increase CPU_SUBSET_MAXCPUS to 8192, a common setting for CONFIG_NR_CPUS on x86_64.
Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Signed-off-by: Len Brown <len.brown@intel.com>
