Calling pmu->start()/stop() on perf events in PERF_EVENT_STATE_OFF can
leave event->hw.idx at -1. When PMU drivers later attempt to use this
negative index as a shift exponent in bitwise operations, it leads to UBSAN
shift-out-of-bounds reports.
The issue is a logical flaw in how event groups handle throttling when some
members are intentionally disabled. Based on the analysis and the
reproducer provided by Mark Rutland (this issue on both arm64 and x86-64).
The scenario unfolds as follows:
1. A group leader event is configured with a very aggressive sampling
period (e.g., sample_period = 1). This causes frequent interrupts and
triggers the throttling mechanism.
2. A child event in the same group is created in a disabled state
(.disabled = 1). This event remains in PERF_EVENT_STATE_OFF.
Since it hasn't been scheduled onto the PMU, its event->hw.idx remains
initialized at -1.
3. When throttling occurs, perf_event_throttle_group() and later
perf_event_unthrottle_group() iterate through all siblings, including
the disabled child event.
4. perf_event_throttle()/unthrottle() are called on this inactive child
event, which then call event->pmu->start()/stop().
5. The PMU driver receives the event with hw.idx == -1 and attempts to
use it as a shift exponent. e.g., in macros like PMCNTENSET(idx),
leading to the UBSAN report.
The throttling mechanism attempts to start/stop events that are not
actively scheduled on the hardware.
Move the state check into perf_event_throttle()/perf_event_unthrottle() so
that inactive events are skipped entirely. This ensures only active events
with a valid hw.idx are processed, preventing undefined behavior and
silencing UBSAN warnings. The corrected check ensures true before
proceeding with PMU operations.
The problem can be reproduced with the syzkaller reproducer:
Fixes: 9734e25fbf ("perf: Fix the throttle logic for a group")
Signed-off-by: Yunseong Kim <ysk@kzalloc.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20250812181046.292382-2-ysk@kzalloc.com
When running an XDP bpf_prog on the remote CPU in cpumap code
then we must disable the direct return optimization that
xdp_return can perform for mem_type page_pool. This optimization
assumes code is still executing under RX-NAPI of the original
receiving CPU, which isn't true on this remote CPU.
The cpumap code already disabled this via helpers
xdp_set_return_frame_no_direct() and xdp_clear_return_frame_no_direct(),
but the scope didn't include xdp_do_flush().
When doing XDP_REDIRECT towards e.g devmap this causes the
function bq_xmit_all() to run with direct return optimization
enabled. This can lead to hard to find bugs. The issue
only happens when bq_xmit_all() cannot ndo_xdp_xmit all
frames and them frees them via xdp_return_frame_rx_napi().
Fix by expanding scope to include xdp_do_flush(). This was found
by Dragos Tatulea.
Fixes: 11941f8a85 ("bpf: cpumap: Implement generic cpumap")
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Reported-by: Chris Arges <carges@cloudflare.com>
Signed-off-by: Jesper Dangaard Brouer <hawk@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Chris Arges <carges@cloudflare.com>
Link: https://patch.msgid.link/175519587755.3008742.1088294435150406835.stgit@firesoul
The qla4xxx_get_ep_fwdb() function is supposed to return NULL on error,
but qla4xxx_ep_connect() returns error pointers. Propagating the error
pointers will lead to an Oops in the caller, so change the error pointers
to NULL.
Fixes: 13483730a1 ("[SCSI] qla4xxx: fix flash/ddb support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/aJwnVKS9tHsw1tEu@stanley.mountain
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add PCI ID to support Intel Wildcat Lake, same as MTL.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250812130259.109645-1-adrian.hunter@intel.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
devm_drm_bridge_alloc() returns ERR_PTR on failure instead of a
NULL pointer, so use IS_ERR() to check the returned pointer.
While at it, on failure, return ERR_CAST(dp) instead of
ERR_PTR(-ENOMEM) in order not to depend on devm_drm_bridge_alloc()
error code implementation.
Fixes: 48f05c3b4b ("drm/bridge: analogix_dp: Use devm_drm_bridge_alloc() API")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20250806095224.527938-1-victor.liu@nxp.com
struct mempool doesn't currently exist, and thus also isn't used in
fnic.h, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250812082808.371119-1-hch@lst.de
Reviewed-by: Karan Tilak Kumar <kartilak@cisco.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This set of fixes includes a solution for the issue described in the tag
annotation for v6.17 updates.
The issue involved a potential call to schedule() within an RCU read-side
critical section. The solution applies reference counting to ensure that
handlers which may call schedule() are invoked safely outside of the
critical section.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCaJ6SzAAKCRCsLtaWM8Lw
E2YMAP0SNa3lrX9AWVviipIztqPb5Eo5jbMFk1KztEYWf/g0RQD+JxdELawys+3V
oVNceJ5UUpQy0lSge4bll0Y1kZNlAQE=
=gk22
-----END PGP SIGNATURE-----
Merge tag 'firewire-fixes-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"This fixes a potential call to schedule() within an RCU read-side
critical section. The solution applies reference counting to ensure
that handlers which may call schedule() are invoked safely outside of
the critical section"
* tag 'firewire-fixes-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: reallocate buffer for FCP address handlers when more than 4 are registered
firewire: core: call FCP address handlers outside RCU read-side critical section
firewire: core: call handler for exclusive regions outside RCU read-side critical section
firewire: core: use reference counting to invoke address handlers safely
make clean does not check the kernel config when removing files. As
such, additions to clean-files under CONFIG_ARM or CONFIG_ARM64 are not
evaluated. For example, when building on arm64, this means that
lib/crypto/arm64/sha{256,512}-core.S are left over after make clean.
Set clean-files unconditionally to ensure that make clean removes these
files.
Fixes: e96cb9507f ("lib/crypto: sha256: Consolidate into single module")
Fixes: 24c91b62ac ("lib/crypto: arm/sha512: Migrate optimized SHA-512 code to library")
Fixes: 60e3f1e9b7 ("lib/crypto: arm64/sha512: Migrate optimized SHA-512 code to library")
Signed-off-by: Tal Zussman <tz2294@columbia.edu>
Link: https://lore.kernel.org/r/20250814-crypto_clean-v2-1-659a2dc86302@columbia.edu
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
The CRC error bit is located at bit 17 in the Rx descriptor, but the
driver was incorrectly using bit 16. Fix it.
Fixes: a36e9f5cfe ("rtase: Add support for a pci table in this module")
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20250813071631.7566-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests to ensure proper backlog accounting in hhf, codel, pie, fq,
fq_pie, and fq_codel qdiscs. We check for the bug pattern originally
found in fq, fq_pie, and fq_codel, which was an underflow in the tbf
parent backlog stats upon child qdisc removal.
Signed-off-by: William Liu <will@willsroot.io>
Reviewed-by: Savino Dicanosa <savy@syst3mfailure.io>
Link: https://patch.msgid.link/20250812235808.45281-1-will@willsroot.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This issue applies for the following qdiscs: hhf, fq, fq_codel, and
fq_pie, and occurs in their change handlers when adjusting to the new
limit. The problem is the following in the values passed to the
subsequent qdisc_tree_reduce_backlog call given a tbf parent:
When the tbf parent runs out of tokens, skbs of these qdiscs will
be placed in gso_skb. Their peek handlers are qdisc_peek_dequeued,
which accounts for both qlen and backlog. However, in the case of
qdisc_dequeue_internal, ONLY qlen is accounted for when pulling
from gso_skb. This means that these qdiscs are missing a
qdisc_qstats_backlog_dec when dropping packets to satisfy the
new limit in their change handlers.
One can observe this issue with the following (with tc patched to
support a limit of 0):
export TARGET=fq
tc qdisc del dev lo root
tc qdisc add dev lo root handle 1: tbf rate 8bit burst 100b latency 1ms
tc qdisc replace dev lo handle 3: parent 1:1 $TARGET limit 1000
echo ''; echo 'add child'; tc -s -d qdisc show dev lo
ping -I lo -f -c2 -s32 -W0.001 127.0.0.1 2>&1 >/dev/null
echo ''; echo 'after ping'; tc -s -d qdisc show dev lo
tc qdisc change dev lo handle 3: parent 1:1 $TARGET limit 0
echo ''; echo 'after limit drop'; tc -s -d qdisc show dev lo
tc qdisc replace dev lo handle 2: parent 1:1 sfq
echo ''; echo 'post graft'; tc -s -d qdisc show dev lo
The second to last show command shows 0 packets but a positive
number (74) of backlog bytes. The problem becomes clearer in the
last show command, where qdisc_purge_queue triggers
qdisc_tree_reduce_backlog with the positive backlog and causes an
underflow in the tbf parent's backlog (4096 Mb instead of 0).
To fix this issue, the codepath for all clients of qdisc_dequeue_internal
has been simplified: codel, pie, hhf, fq, fq_pie, and fq_codel.
qdisc_dequeue_internal handles the backlog adjustments for all cases that
do not directly use the dequeue handler.
The old fq_codel_change limit adjustment loop accumulated the arguments to
the subsequent qdisc_tree_reduce_backlog call through the cstats field.
However, this is confusing and error prone as fq_codel_dequeue could also
potentially mutate this field (which qdisc_dequeue_internal calls in the
non gso_skb case), so we have unified the code here with other qdiscs.
Fixes: 2d3cbfd6d5 ("net_sched: Flush gso_skb list too during ->change()")
Fixes: 4b549a2ef4 ("fq_codel: Fair Queue Codel AQM")
Fixes: 10239edf86 ("net-qdisc-hhf: Heavy-Hitter Filter (HHF) qdisc")
Signed-off-by: William Liu <will@willsroot.io>
Reviewed-by: Savino Dicanosa <savy@syst3mfailure.io>
Link: https://patch.msgid.link/20250812235725.45243-1-will@willsroot.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When set multicast_query_interval to a large value, the local variable
'time' in br_multicast_send_query() may overflow. If the time is smaller
than jiffies, the timer will expire immediately, and then call mod_timer()
again, which creates a loop and may trigger the following soft lockup
issue.
watchdog: BUG: soft lockup - CPU#1 stuck for 221s! [rb_consumer:66]
CPU: 1 UID: 0 PID: 66 Comm: rb_consumer Not tainted 6.16.0+ #259 PREEMPT(none)
Call Trace:
<IRQ>
__netdev_alloc_skb+0x2e/0x3a0
br_ip6_multicast_alloc_query+0x212/0x1b70
__br_multicast_send_query+0x376/0xac0
br_multicast_send_query+0x299/0x510
br_multicast_query_expired.constprop.0+0x16d/0x1b0
call_timer_fn+0x3b/0x2a0
__run_timers+0x619/0x950
run_timer_softirq+0x11c/0x220
handle_softirqs+0x18e/0x560
__irq_exit_rcu+0x158/0x1a0
sysvec_apic_timer_interrupt+0x76/0x90
</IRQ>
This issue can be reproduced with:
ip link add br0 type bridge
echo 1 > /sys/class/net/br0/bridge/multicast_querier
echo 0xffffffffffffffff >
/sys/class/net/br0/bridge/multicast_query_interval
ip link set dev br0 up
The multicast_startup_query_interval can also cause this issue. Similar to
the commit 99b4061095 ("net: bridge: mcast: add and enforce query
interval minimum"), add check for the query interval maximum to fix this
issue.
Link: https://lore.kernel.org/netdev/20250806094941.1285944-1-wangliang74@huawei.com/
Link: https://lore.kernel.org/netdev/20250812091818.542238-1-wangliang74@huawei.com/
Fixes: d902eee43f ("bridge: Add multicast count/interval sysfs entries")
Suggested-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250813021054.1643649-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Submit multiple descriptors in axienet_rx_cb() to fill Rx skb ring. This
ensures the ring "catches up" on previously missed allocations.
Increment Rx skb ring head pointer after BD is successfully allocated.
Previously, head pointer was incremented before verifying if descriptor is
successfully allocated and has valid entries, which could lead to ring
state inconsistency if descriptor setup failed.
These changes improve reliability by maintaining adequate descriptor
availability and ensuring proper ring buffer state management.
Fixes: 6a91b846af ("net: axienet: Introduce dmaengine support")
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Link: https://patch.msgid.link/20250813135559.1555652-1-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove Thorsten Winkler as maintainer and add Aswin Karuvally as reviewer.
Thank you Thorsten for your support, welcome Aswin!
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Thorsten Winkler <twinkler@linux.ibm.com>
Acked-by: Aswin Karuvally <aswin@linux.ibm.com>
Link: https://patch.msgid.link/20250813111633.241111-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-thread attacks are generally harder as they require the victim to be
co-located on a core. However, with VMSCAPE the adversary targets belong to
the same guest execution, that are more likely to get co-located. In
particular, a thread that is currently executing userspace hypervisor
(after the IBPB) may still be targeted by a guest execution from a sibling
thread.
Issue a warning about the potential risk, except when:
- SMT is disabled
- STIBP is enabled system-wide
- Intel eIBRS is enabled (which implies STIBP protection)
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
cpu_bugs_smt_update() uses global variables from different mitigations. For
SMT updates it can't currently use vmscape_mitigation that is defined after
it.
Since cpu_bugs_smt_update() depends on many other mitigations, move it
after all mitigations are defined. With that, it can use vmscape_mitigation
in a moment.
No functional change.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
VMSCAPE is a vulnerability that exploits insufficient branch predictor
isolation between a guest and a userspace hypervisor (like QEMU). Existing
mitigations already protect kernel/KVM from a malicious guest. Userspace
can additionally be protected by flushing the branch predictors after a
VMexit.
Since it is the userspace that consumes the poisoned branch predictors,
conditionally issue an IBPB after a VMexit and before returning to
userspace. Workloads that frequently switch between hypervisor and
userspace will incur the most overhead from the new IBPB.
This new IBPB is not integrated with the existing IBPB sites. For
instance, a task can use the existing speculation control prctl() to
get an IBPB at context switch time. With this implementation, the
IBPB is doubled up: one at context switch and another before running
userspace.
The intent is to integrate and optimize these cases post-embargo.
[ dhansen: elaborate on suboptimal IBPB solution ]
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Sean Christopherson <seanjc@google.com>
The VMSCAPE vulnerability may allow a guest to cause Branch Target
Injection (BTI) in userspace hypervisors.
Kernels (both host and guest) have existing defenses against direct BTI
attacks from guests. There are also inter-process BTI mitigations which
prevent processes from attacking each other. However, the threat in this
case is to a userspace hypervisor within the same process as the attacker.
Userspace hypervisors have access to their own sensitive data like disk
encryption keys and also typically have access to all guest data. This
means guest userspace may use the hypervisor as a confused deputy to attack
sensitive guest kernel data. There are no existing mitigations for these
attacks.
Introduce X86_BUG_VMSCAPE for this vulnerability and set it on affected
Intel and AMD CPUs.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
VMSCAPE is a vulnerability that may allow a guest to influence the branch
prediction in host userspace, particularly affecting hypervisors like QEMU.
Add the documentation.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
- Prevent the ACPI EC driver from ignoring ECDT information in the
cases when the ID string in the ECDT is invalid, but not empty, to
fix thouchpad detection on ThinkBook 14 G7 IML (Armin Wolf).
- Rearrange checks in acpi_processor_ppc_init() to restore the handling
of frequency QoS requests related to _PPC limits inadvertently broken
by a recent update (Rafael Wysocki).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmidxxQSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1l8UH/R3dcBoacfdhaD6+KLUfaerWiKyW76dm
+310aADCX8ZTHpcMiy17g+rzeS07O81wfCvDUptbfF/1xmdNiZ46wq8FkOUlgVhv
Zhap7Sm+zTHTU/WkcX/2xRgpiJ9p1c9QnDI19hfRbUHcr/0CcsR04fxS2tiJUKuT
cd2RN7v2SKiULMQNtD7RFKYYmtJjAj+h67kbvgA1cxhH+q1g3EFdjy16cPlkH/0X
LAtRHWJtZxx8wO9NF2R/boKXqtq2Z+/StDekZ0BXqBPe8ivW3V9Z78eiFpm01bhB
YdCAGxgNvoObfueFQK+SOSlGod0a3B1rdeyK7PbkPe1tK/m/7KNgP5s=
=5cFF
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These restore corner case behavior of the EC driver related to the
handling of defective ACPI tables and fix a recent regression in the
ACPI processor driver:
- Prevent the ACPI EC driver from ignoring ECDT information in the
cases when the ID string in the ECDT is invalid, but not empty, to
fix thouchpad detection on ThinkBook 14 G7 IML (Armin Wolf)
- Rearrange checks in acpi_processor_ppc_init() to restore the
handling of frequency QoS requests related to _PPC limits
inadvertently broken by a recent update (Rafael Wysocki)"
* tag 'acpi-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Relax sanity check of the ECDT ID string
ACPI: processor: perflib: Move problematic pr->performance check
- Allow intel_idle to use _CST information from ACPI tables for
idle states enumeration on any family of processors (Len Brown).
- Restore corner case behavior of the menu cpuidle governor, related
to the handling of systems where idle states selected by the governor
are rejected by the cpuidle driver, inadvertently changed during the
6.15 development cycle (Rafael Wysocki).
- Add support for Clearwater Forest in the out-of-band (OOB) mode to
the intel_pstate driver (Srinivas Pandruvada).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmidw1wSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1NHAIAJDN1yMvQo0Pqlgw/FJYJzUGDF6kDfUF
xuAwBCr4/CYzlsi9yrUtfqx0hKHKdhRB9XsX/wlc0TM6nH6QH4X7XLy/SbZpZ28S
YsmJAPu/GJl/H6QvsDjYiovBhtPqmLFQMdTdW1WaIJUaBqffMUDb7xtZHy3Ib847
CpkmsKyPqsn0A0TMCWQ3fyprkqNMHMWL1qiPLllmlE/N9b9LMugN+KnxCL7dFnx1
b8mVDIvgJBMbayNs59oBFeg+92DLDvE41iCbW29QIblO1EjpS7ZnWHsbJvOswJCK
/ekNVkpgPywKvI0ycOjWTAkfNbfU3BhH3ZMupVzfzJ9WdqDxCU7tO7A=
=OJnT
-----END PGP SIGNATURE-----
Merge tag 'pm-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These remove an artificial limitation from the intel_idle driver,
update the menu cpuidle governor to restore its previous behavior in a
corner case and add one more supported platform configuration to the
intel_pstate driver:
- Allow intel_idle to use _CST information from ACPI tables for idle
states enumeration on any family of processors (Len Brown)
- Restore corner case behavior of the menu cpuidle governor, related
to the handling of systems where idle states selected by the
governor are rejected by the cpuidle driver, inadvertently changed
during the 6.15 development cycle (Rafael Wysocki)
- Add support for Clearwater Forest in the out-of-band (OOB) mode to
the intel_pstate driver (Srinivas Pandruvada)"
* tag 'pm-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Support Clearwater Forest OOB mode
cpuidle: governors: menu: Avoid using invalid recent intervals data
intel_idle: Allow loading ACPI tables for any family
LMEM is partitioned between multiple VFs and we expect that the more
VFs we have, the less LMEM is assigned to each VF.
This means that we can achieve full LMEM BAR access without the need to
attempt full VF LMEM BAR resize via pci_resize_resource().
Always try to set the largest possible BAR size that allows to fit the
number of enabled VFs and inform the user in case the resize attempt is
not successful.
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250527120637.665506-7-michal.winiarski@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 32a4d1b98e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Current release - regressions:
- netfilter: nft_set_pipapo:
- don't return bogus extension pointer
- fix null deref for empty set
Current release - new code bugs:
- core: prevent deadlocks when enabling NAPIs with mixed kthread config
- eth: netdevsim: Fix wild pointer access in nsim_queue_free().
Previous releases - regressions:
- page_pool: allow enabling recycling late, fix false positive warning
- sched: ets: use old 'nbands' while purging unused classes
- xfrm:
- restore GSO for SW crypto
- bring back device check in validate_xmit_xfrm
- tls: handle data disappearing from under the TLS ULP
- ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
- eth: bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
- eth: hv_netvsc: fix panic during namespace deletion with VF
Previous releases - always broken:
- netfilter: fix refcount leak on table dump
- vsock: do not allow binding to VMADDR_PORT_ANY
- sctp: linearize cloned gso packets in sctp_rcv
- eth: hibmcge: fix the division by zero issue
- eth: microchip: fix KSZ8863 reset problem
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=Ydk1
-----END PGP SIGNATURE-----
Merge tag 'net-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Netfilter and IPsec.
Current release - regressions:
- netfilter: nft_set_pipapo:
- don't return bogus extension pointer
- fix null deref for empty set
Current release - new code bugs:
- core: prevent deadlocks when enabling NAPIs with mixed kthread
config
- eth: netdevsim: Fix wild pointer access in nsim_queue_free().
Previous releases - regressions:
- page_pool: allow enabling recycling late, fix false positive
warning
- sched: ets: use old 'nbands' while purging unused classes
- xfrm:
- restore GSO for SW crypto
- bring back device check in validate_xmit_xfrm
- tls: handle data disappearing from under the TLS ULP
- ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
- eth:
- bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
- hv_netvsc: fix panic during namespace deletion with VF
Previous releases - always broken:
- netfilter: fix refcount leak on table dump
- vsock: do not allow binding to VMADDR_PORT_ANY
- sctp: linearize cloned gso packets in sctp_rcv
- eth:
- hibmcge: fix the division by zero issue
- microchip: fix KSZ8863 reset problem"
* tag 'net-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
net: usb: asix_devices: add phy_mask for ax88772 mdio bus
net: kcm: Fix race condition in kcm_unattach()
selftests: net/forwarding: test purge of active DWRR classes
net/sched: ets: use old 'nbands' while purging unused classes
bnxt: fill data page pool with frags if PAGE_SIZE > BNXT_RX_PAGE_SIZE
netdevsim: Fix wild pointer access in nsim_queue_free().
net: mctp: Fix bad kfree_skb in bind lookup test
netfilter: nf_tables: reject duplicate device on updates
ipvs: Fix estimator kthreads preferred affinity
netfilter: nft_set_pipapo: fix null deref for empty set
selftests: tls: test TCP stealing data from under the TLS socket
tls: handle data disappearing from under the TLS ULP
ptp: prevent possible ABBA deadlock in ptp_clock_freerun()
ixgbe: prevent from unwanted interface name changes
devlink: let driver opt out of automatic phys_port_name generation
net: prevent deadlocks when enabling NAPIs with mixed kthread config
net: update NAPI threaded config even for disabled NAPIs
selftests: drv-net: don't assume device has only 2 queues
docs: Fix name for net.ipv4.udp_child_hash_entries
riscv: dts: thead: Add APB clocks for TH1520 GMACs
...
Since commit c9b1150a68 ("drm/atomic-helper: Re-order bridge chain
pre-enable and post-disable"), the bridge pre_enable callbacks are now
called before crtc enable, and the bridge post_disable callbacks after
the crtc disable.
In the mediatek-drm driver, this change leads to transfer errors on
mtk_dsi_host_transfer callback processing during the panel bridge
pre-enable sequence because the DSI host bridge pre_enable and CRTC
enable sequences, that are enabling the required clocks and PHY using
mtk_dsi_poweron function, are called after.
So, in order to fix this call order issue, request the DSI host bridge
be pre-enabled before panel bridge by setting pre_enable_prev_first
flag on DSI device bridge in the mtk_dsi_host_attach function.
Fixes: c9b1150a68 ("drm/atomic-helper: Re-order bridge chain pre-enable and post-disable")
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250701-mediatek-drm-fix-dsi-panel-init-v1-1-7af4adb9fdeb@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
* pm-cpuidle:
cpuidle: governors: menu: Avoid using invalid recent intervals data
intel_idle: Allow loading ACPI tables for any family
* pm-cpufreq:
cpufreq: intel_pstate: Support Clearwater Forest OOB mode
There are two compatible strings defined in "8250.yaml" that require
two clocks to be specified, along with their names:
- "spacemit,k1-uart", used in "spacemit/k1.dtsi"
- "nxp,lpc1850-uart", used in "lpc/lpc18xx.dtsi"
When only one clock is used, the name is not required. However there
are two places that do specify a name:
- In "mediatek/mt7623.dtsi", the clock for the "mediatek,mtk-btif"
compatible serial device is named "main"
- In "qca/ar9132.dtsi", the clock for the "ns8250" compatible
serial device is named "uart"
In commit d2db0d7815 ("dt-bindings: serial: 8250: allow clock
'uartclk' and 'reg' for nxp,lpc1850-uart"), Frank Li added the
restriction that two named clocks be used for the NXP platform
mentioned above.
Change that logic, so that an additional condition for (only) the
SpacemiT platform similarly restricts the two clocks to have the
names "core" and "bus".
Finally, add "main" and "uart" as allowed names when a single clock is
specified.
Fixes: 2c0594f9f0 ("dt-bindings: serial: 8250: support an optional second clock")
Cc: stable <stable@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507160314.wrC51lXX-lkp@intel.com/
Signed-off-by: Alex Elder <elder@riscstar.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250813031338.2328392-1-elder@riscstar.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A block that required a "spacemit,k1-uart" compatible node to
specify two clocks was placed in the wrong spot in the binding.
Conor Dooley pointed out it belongs earlier in the file, as part
of the initial "allOf".
Fixes: 2c0594f9f0 ("dt-bindings: serial: 8250: support an optional second clock")
Cc: stable <stable@kernel.org>
Reported-by: Conor Dooley <conor@kernel.org>
Closes: https://lore.kernel.org/lkml/20250729-reshuffle-contented-e6def76b540b@spud/
Signed-off-by: Alex Elder <elder@riscstar.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250813032151.2330616-1-elder@riscstar.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lists should have fixed constraints, because binding must be specific in
respect to hardware, thus add missing constraints to number of clocks.
Cc: stable <stable@kernel.org>
Fixes: 88a499cd70 ("dt-bindings: Add support for the Broadcom UART driver")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250812121630.67072-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When trying to set MCR[2], XON1 is incorrectly accessed instead. And when
writing to the TCR register to configure flow control levels, we are
incorrectly writing to the MSR register. The default value of $00 is then
used for TCR, which means that selectable trigger levels in FCR are used
in place of TCR.
TCR/TLR access requires EFR[4] (enable enhanced functions) and MCR[2]
to be set. EFR[4] is already set in probe().
MCR access requires LCR[7] to be zero.
Since LCR is set to $BF when trying to set MCR[2], XON1 is incorrectly
accessed instead because MCR shares the same address space as XON1.
Since MCR[2] is unmodified and still zero, when writing to TCR we are in
fact writing to MSR because TCR/TLR registers share the same address space
as MSR/SPR.
Fix by first removing useless reconfiguration of EFR[4] (enable enhanced
functions), as it is already enabled in sc16is7xx_probe() since commit
43c51bb573 ("sc16is7xx: make sure device is in suspend once probed").
Now LCR is $00, which means that MCR access is enabled.
Also remove regcache_cache_bypass() calls since we no longer access the
enhanced registers set, and TCR is already declared as volatile (in fact
by declaring MSR as volatile, which shares the same address).
Finally disable access to TCR/TLR registers after modifying them by
clearing MCR[2].
Note: the comment about "... and internal clock div" is wrong and can be
ignored/removed as access to internal clock div registers (DLL/DLH)
is permitted only when LCR[7] is logic 1, not when enhanced features
is enabled. And DLL/DLH access is not needed in sc16is7xx_startup().
Fixes: dfeae619d7 ("serial: sc16is7xx")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20250731124451.1108864-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete extra checks for the ATA_DFLAG_CDL_ENABLED flag that prevent
SET FEATURES command from being issued to a drive when NCQ commands
are active.
ata_mselect_control_ata_feature() sets / clears the ATA_DFLAG_CDL_ENABLED
flag during the translation of MODE SELECT to SET FEATURES. If SET FEATURES
gets deferred due to outstanding NCQ commands, the original MODE SELECT
command will be re-queued. When the re-queued MODE SELECT goes through
the ata_mselect_control_ata_feature() translation again, SET FEATURES
will not be issued because ATA_DFLAG_CDL_ENABLED has been already set or
cleared by the initial translation of MODE SELECT.
The ATA_DFLAG_CDL_ENABLED checks in ata_mselect_control_ata_feature()
are safe to remove because scsi_cdl_enable() implements a similar logic
that avoids enabling CDL if it has been enabled already.
Fixes: 17e897a456 ("ata: libata-scsi: Improve CDL control")
Cc: stable@vger.kernel.org
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Make video port registers nonvolatile. As DSP_CTRL register is written
to twice due to gamma LUT enable bit which is set outside of the main
DSP_CTRL initialization within atomic_enable (for rk356x case it is also
necessary to always disable gamma LUT before writing a new LUT) there is
a chance that DSP_CTRL value read-out in gamma LUT init/update code is
not the one which was written by the preceding DSP_CTRL initialization
code within atomic_enable. This might result in misconfigured DSP_CTRL
which leads to no visual output[1]. Since DSP_CTRL write takes effect
after VSYNC[1] the issue is not always present. When tested on Pinetab2
with kernel 6.14 it happenes only when DRM is compiled as a module[1].
In order to confirm that it is a timing issue I inserted 18ms udelay
before vop2_crtc_atomic_try_set_gamma in atomic enable and compiled DRM
as module - this has also fixed the issue.
[1] https://lore.kernel.org/linux-rockchip/562b38e5.a496.1975f09f983.Coremail.andyshrk@163.com/
Reported-by: Diederik de Haas <didi.debian@cknow.org>
Closes: https://lore.kernel.org/linux-rockchip/DAEVDSTMWI1E.J454VZN0R9MA@cknow.org/
Suggested-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Piotr Zalewski <pZ010001011111@proton.me>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250706083629.140332-2-pZ010001011111@proton.me
Commit 4371fe1ba4 ("ata: libata-eh: Avoid unnecessary resets when
revalidating devices") replaced the call to ata_phys_link_offline() in
ata_eh_revalidate_and_attach() with the new function
ata_eh_link_established() which relaxes the checks on a device link
state to account for low power mode transitions. However, this change
assumed that the device port has a valid scr_read method to obtain the
SStatus register for the port. This is not always the case, especially
with older IDE/PATA adapters (e.g. PATA/IDE devices emulated with QEMU).
For such adapter, ata_eh_link_established() will always return false,
causing ata_eh_revalidate_and_attach() to go into its error path and
ultimately to the device being disabled.
Avoid this by restoring the previous behavior, which is to assume that
the link is online if reading the port SStatus register fails.
While at it, also fix the spelling of SStatus in the comment describing
the function ata_eh_link_established().
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 4371fe1ba4 ("ata: libata-eh: Avoid unnecessary resets when revalidating devices")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
UAC3 class segment descriptors need to be verified whether their sizes
match with the declared lengths and whether they fit with the
allocated buffer sizes, too. Otherwise malicious firmware may lead to
the unexpected OOB accesses.
Fixes: 11785ef532 ("ALSA: usb-audio: Initial Power Domain support")
Reported-and-tested-by: Youngjun Lee <yjjuny.lee@samsung.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250814081245.8902-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
UAC3 power domain descriptors need to be verified with its variable
bLength for avoiding the unexpected OOB accesses by malicious
firmware, too.
Fixes: 9a2fe9b801 ("ALSA: usb: initial USB Audio Device Class 3.0 support")
Reported-and-tested-by: Youngjun Lee <yjjuny.lee@samsung.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250814081245.8902-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Without setting phy_mask for ax88772 mdio bus, current driver may create
at most 32 mdio phy devices with phy address range from 0x00 ~ 0x1f.
DLink DUB-E100 H/W Ver B1 is such a device. However, only one main phy
device will bind to net phy driver. This is creating issue during system
suspend/resume since phy_polling_mode() in phy_state_machine() will
directly deference member of phydev->drv for non-main phy devices. Then
NULL pointer dereference issue will occur. Due to only external phy or
internal phy is necessary, add phy_mask for ax88772 mdio bus to workarnoud
the issue.
Closes: https://lore.kernel.org/netdev/20250806082931.3289134-1-xu.yang_2@nxp.com
Fixes: e532a096be ("net: usb: asix: ax88772: add phylib support")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250811092931.860333-1-xu.yang_2@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A reasonably small collection of fixes that came in since the merge
window, mostly small and driver specific plus a cleanup of the menu
reorganisation to address some user confusion with the way the generic
drivers had been handled.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmic65gACgkQJNaLcl1U
h9BcKQf/QlkZR3J9y2NEH8UbAqf0l3c5WFMl1bfUtgiTTZzbgC5eP5wqjmP3bkCp
FRDxzrN0cukzajbfu63SM4WASYswH1uOIv2qD1T/xuDFZRZM2Dhbi0gs+wHYrpDv
laAmUSLbKAoRYHCAkfaDu9rPjVbOFmFvswmf1pIAfkfuRCJTGfiTk6sO6yKG24LP
tk1XPAZdDK22D5W2aVCDMf4BRJ2RKjJBRpN48Mwg3OaAwpIuBsftdZAnur3QfkLW
fDhDWjBqPr1wJsHmG96xIWFQG241kAD60BBposPvpLRF/HN813gcPwYDqW3U+ddF
Od38MSDqp2v2FFoHvgS6Y5GzfFK6Wg==
=O2NX
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.17-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.17
A reasonably small collection of fixes that came in since the merge
window, mostly small and driver specific plus a cleanup of the menu
reorganisation to address some user confusion with the way the generic
drivers had been handled.
Davide Caratti says:
====================
ets: use old 'nbands' while purging unused classes
- patch 1/2 fixes a NULL dereference in the control path of sch_ets qdisc
- patch 2/2 extends kselftests to verify effectiveness of the above fix
====================
Link: https://patch.msgid.link/cover.1755016081.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
