When verify_sha256_digest() fails, __apply_microcode_amd() should propagate
the failure by returning false (and not -1 which is promoted to true).
Fixes: 50cef76d5c ("x86/microcode/AMD: Load only SHA256-checksummed patches")
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250327230503.1850368-2-boris.ostrovsky@oracle.com
commit 8a7d12d674 ("net: usb: usbnet: fix name regression") assumed
that local addresses always came from the kernel, but some devices hand
out local mac addresses so we ended up with point-to-point devices with
a mac set by the driver, renaming to eth%d when they used to be named
usb%d.
Userspace should not rely on device name, but for the sake of stability
restore the local mac address check portion of the naming exception:
point to point devices which either have no mac set by the driver or
have a local mac handed out by the driver will keep the usb%d name.
(some USB LTE modems are known to hand out a stable mac from the locally
administered range; that mac appears to be random (different for
mulitple devices) and can be reset with device-specific commands, so
while such devices would benefit from getting a OUI reserved, we have
to deal with these and might as well preserve the existing behavior
to avoid breaking fragile openwrt configurations and such on upgrade.)
Link: https://lkml.kernel.org/r/20241203130457.904325-1-asmadeus@codewreck.org
Fixes: 8a7d12d674 ("net: usb: usbnet: fix name regression")
Cc: stable@vger.kernel.org
Tested-by: Ahmed Naseef <naseefkm@gmail.com>
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20250326-usbnet_rename-v2-1-57eb21fcff26@atmark-techno.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When hw-gro is enabled, the maximum number of header entries that are
needed per wqe (hd_per_wqe) is calculated based on the size of the
reservations among other parameters.
Miscalculation of the size of reservations leads to incorrect
calculation of hd_per_wqe as 0, particularly in the case of large page
size like in aarch64, this prevents the SHAMPO header from being
correctly initialized in the device, ultimately causing the following
cqe err that indicates a violation of PD.
mlx5_core 0000:00:08.0 eth2: ERR CQE on RQ: 0x1180
mlx5_core 0000:00:08.0 eth2: Error cqe on cqn 0x510, ci 0x0, qn 0x1180, opcode 0xe, syndrome 0x4, vendor syndrome 0x32
00000000: 00 00 00 00 04 4a 00 00 00 00 00 00 20 00 93 32
00000010: 55 00 00 00 fb cc 00 00 00 00 00 00 07 18 00 00
00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 4a
00000030: 00 00 00 9a 93 00 32 04 00 00 00 00 00 00 da e1
Use the correct formula for calculating the size of reservations,
precisely it shouldn't be dependent on page size, instead use the
correct multiply of MLX5E_SHAMPO_WQ_BASE_RESRV_SIZE.
Fixes: e5ca8fb08a ("net/mlx5e: Add control path for SHAMPO feature")
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1742732906-166564-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Frag allocators, such as netdev_alloc_frag(), were not designed to
work for fragsz > PAGE_SIZE.
So, switch to page pool for jumbo frames instead of using page frag
allocators. This driver is using page pool for smaller MTUs already.
Cc: stable@vger.kernel.org
Fixes: 80f6215b45 ("net: mana: Add support for jumbo frame")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Long Li <longli@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Link: https://patch.msgid.link/1742920357-27263-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The infrastructure to handle multi-phy devices is fairly standalone.
Add myself as maintainer for that part as well as the netlink uAPI
that exposes it.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250327110013.106865-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
So far, no differences are known, so it can fallback to the default
compatible.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Calling verity_verify_io in bh for IO of all sizes is not suitable for
embedded devices. From our tests, it can improve the performance of 4K
synchronise random reads.
For example:
./fio --name=rand_read --ioengine=psync --rw=randread --bs=4K \
--direct=1 --numjobs=8 --runtime=60 --time_based --group_reporting \
--filename=/dev/block/mapper/xx-verity
But it will degrade the performance of 512K synchronise sequential reads
on our devices.
For example:
./fio --name=read --ioengine=psync --rw=read --bs=512K --direct=1 \
--numjobs=8 --runtime=60 --time_based --group_reporting \
--filename=/dev/block/mapper/xx-verity
A parameter array is introduced by this change. And users can modify the
default config by /sys/module/dm_verity/parameters/use_bh_bytes.
The default limits for NONE/RT/BE is set to 8192.
The default limits for IDLE is set to 0.
Call verity_verify_io directly when verity_end_io is not in hardirq.
Signed-off-by: LongPing Wei <weilongping@oppo.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
IOMAP_F_ATOMIC_BIO mistakenly took the same value as of IOMAP_F_SIZE_CHANGED
in patch '370a6de765 ("iomap: rework IOMAP atomic flags")'.
Let's fix this and let's also create some more space for filesystem reported
flags to avoid this in future. This patch makes the core iomap flags to start
from bit 15, moving downwards. Note that "flags" member within struct iomap
is of type u16.
Fixes: 370a6de765 ("iomap: rework IOMAP atomic flags")
Signed-off-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20250327170119.61045-1-ritesh.list@gmail.com
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Move the conflicting declaration to the end of the structure. Notice
that `struct statmount` is a flexible structure --a structure that
contains a flexible-array member.
Fix the following warning:
fs/namespace.c:5329:26: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/Z-SZKNdCiAkVJvqm@kspp
Signed-off-by: Christian Brauner <brauner@kernel.org>
Remove Joel Becker as maintainer of configfs and add Andreas Hindborg as
maintainer and Breno Leitao as reviewer. Also update the tree URL.
Add an entry for Joel Becker to CREDITS.
Acked-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250326-configfs-maintainer-v1-1-b175189fa27b@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Revise the power measurement logic to save and evaluate energy values.
Previously, the test only checked whether the system had entered the RC6
state, without considering any potential interruptions in that state.
This update introduces a threshold check to ensure that the GPU remains
in the RC6 state properly during the specified sleep duration.
v3:
- Reorder threshold check (Badal)
v4:
- Improved commit message (Anshuman)
v5:
- Rename variables for improved readability (Anshuman)
Signed-off-by: Sk Anirban <sk.anirban@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://lore.kernel.org/r/20250327191924.4131598-1-sk.anirban@intel.com
Fixes include:
. remove unused include of linux/fb.h
. use strscpy() instead of strncpy()
-----BEGIN PGP SIGNATURE-----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=VrUa
-----END PGP SIGNATURE-----
Merge tag 'm68knommu-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu updates from Greg Ungerer:
- remove unused include of linux/fb.h
- use strscpy() instead of strncpy()
* tag 'm68knommu-for-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68k: mm: Replace deprecated strncpy() with strscpy()
m68k: Do not include <linux/fb.h>
- Removal of support for IBM Cell Blades
- SMP support for microwatt platform
- Support for inline static calls on PPC32
- Enable pmu selftests for power11 platform
- Enable hardware trace macro (HTM) hcall support
- Support for limited address mode capability
- Changes to RMA size from 512 MB to 768 MB to handle fadump
- Misc fixes and cleanups
Thanks to: Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann,
Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom, Gaurav
Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook, Mahesh Salgaonkar,
Michael Ellerman, Paul Mackerras, Ritesh Harjani (IBM), Sathvika Vasireddy,
Segher Boessenkool, Sourabh Jain, Vaibhav Jain, Venkat Rao Bagalkote.
-----BEGIN PGP SIGNATURE-----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=GFcj
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Remove support for IBM Cell Blades
- SMP support for microwatt platform
- Support for inline static calls on PPC32
- Enable pmu selftests for power11 platform
- Enable hardware trace macro (HTM) hcall support
- Support for limited address mode capability
- Changes to RMA size from 512 MB to 768 MB to handle fadump
- Misc fixes and cleanups
Thanks to Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann,
Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom,
Gaurav Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook,
Mahesh Salgaonkar, Michael Ellerman, Paul Mackerras, Ritesh Harjani
(IBM), Sathvika Vasireddy, Segher Boessenkool, Sourabh Jain, Vaibhav
Jain, and Venkat Rao Bagalkote.
* tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (61 commits)
powerpc/kexec: fix physical address calculation in clear_utlb_entry()
crypto: powerpc: Mark ghashp8-ppc.o as an OBJECT_FILES_NON_STANDARD
powerpc: Fix 'intra_function_call not a direct call' warning
powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu'
KVM: PPC: Enable CAP_SPAPR_TCE_VFIO on pSeries KVM guests
powerpc/prom_init: Fixup missing #size-cells on PowerBook6,7
powerpc/microwatt: Add SMP support
powerpc: Define config option for processors with broadcast TLBIE
powerpc/microwatt: Define an idle power-save function
powerpc/microwatt: Device-tree updates
powerpc/microwatt: Select COMMON_CLK in order to get the clock framework
net: toshiba: Remove reference to PPC_IBM_CELL_BLADE
net: spider_net: Remove powerpc Cell driver
cpufreq: ppc_cbe: Remove powerpc Cell driver
genirq: Remove IRQ_EDGE_EOI_HANDLER
docs: Remove reference to removed CBE_CPUFREQ_SPU_GOVERNOR
powerpc: Remove UDBG_RTAS_CONSOLE
powerpc/io: Use standard barrier macros in io.c
powerpc/io: Rename _insw_ns() etc.
powerpc/io: Use generic raw accessors
...
- probe-events: Add comments about entry data storing code to clarify
where and how the entry data is stored for function return events.
- probe-events: Log error for exceeding the number of arguments to help
user to identify error reason via tracefs/error_log file.
- selftests/ftrace: Improve the ftracetest to add followngs.
. Expand the tprobe event test to check if it can correctly find
the wrong format tracepoint name.
. Add new syntax error test to check whether error_log correctly
indicates a wrong character in the tracepoint name.
. Add a new dynamic events argument limitation test case which checks
max number of probe arguments.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmflTlobHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8ba9UIALzzZQxzUhJYO/B/XaCz
KTuSrU2594cLr3nCrmCfL3UHUCr5IcjXKCfUdrgzE9mckWF+nVRXWwbp29KpOQky
fzU9Ardbr7ksGAYFk4My+P/BeYa7vh9LwofXzWlJibANVxWvq66+GfKnWnh1P8Bl
/zjov61DAEQmDfXNGZ2oTmKnYYMoPkJU4voRvAEUgiP02SrF04UUa00uC7hmZJJV
aI5b6TatE5FDEmAoHWh0cf04HoyevRyLVOQd5GSswH/oWpyhs90M7a9WENHamBx6
RXEZ3xYyuH9zBSvYVeRn2H1eHnGCR4RMctZiRGXF8EdLWo7RXRQ1Hp9CgvwDrU8Z
IL0=
=vZ3e
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- probe-events: Add comments about entry data storing code to clarify
where and how the entry data is stored for function return events.
- probe-events: Log error for exceeding the number of arguments to help
user to identify error reason via tracefs/error_log file.
- Improve the ftracetest selftests:
- Expand the tprobe event test to check if it can correctly find the
wrong format tracepoint name.
- Add new syntax error test to check whether error_log correctly
indicates a wrong character in the tracepoint name.
- Add a new dynamic events argument limitation test case which
checks max number of probe arguments.
* tag 'probes-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: probe-events: Add comments about entry data storing code
selftests/ftrace: Add dynamic events argument limitation test case
selftests/ftrace: Add new syntax error test
selftests/ftrace: Expand the tprobe event test to check wrong format
tracing: probe-events: Log error for exceeding the number of arguments
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmflMGMACgkQUqAMR0iA
lPKHhg/8DjxkQ3tvUpW53pfABBdKELJWOl4hH+IMvGcdh2dZrcFf6OkEB4JeXXVn
duSODaefalrdU0jV21LChYpEkG40wZqStmamH9im+VbyCc8JwMwvWckrw45RNmjO
AC4oVh0K9SJcrTj7XWsFSeS38KmQKhtp2zTHpSqCW9FZkfn8si11E8Xzue2kTtEH
7CESq6N0SMahVfiNkLI1n0x0mUyWiTE43hQ3e+tmmBgtmv3gU4FpQqeTGc/MQUxy
B6AaI1vChovLmfNhw4KM8GvyPCTIn4xRQ09WXZRbK2ZzAxgFfm7QXGL3E93ra929
juSoIWnNwzw81RB3apzclOHFTbctHJWL+85KEefqCjrCuEbaoLNGoLkVqNuj0U+D
LmLqmm6NfEtPzDVBY232KepjFUoIb890eKRF3Wq1NnHonaVxmUSMEMRSdlKeHpSo
uImBhr5XhXDJLHt4+lAa4m0JSm3RH2AK83xIrdJq/YUcKscCzJMHLqqsp8pCa7mb
L7iOhHFKs2r6GJCt5kLEw1jkNEg5Lpk08fY5AekjScvNcxXWXF8E8Jl9DnBBoz+5
e15mvqsiQtcAGHyR1Ohmw8UPYnWY2fSZTmru9aClwHCvC0q+cyCxIZgcqLxFYFIr
TKIgQ6zSepA+j7SzI1SaDY4Z9cNWMTU+9GqrNO3xO4ddpKrp5C8=
=ggzJ
-----END PGP SIGNATURE-----
Merge tag 'livepatching-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Add a selftest for tracing of a livepatched function
- Skip a selftest when kprobes are not using ftrace
- Some documentation clean up
* tag 'livepatching-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests: livepatch: test if ftrace can trace a livepatched function
selftests: livepatch: add new ftrace helpers functions
selftest/livepatch: Only run test-kprobe with CONFIG_KPROBES_ON_FTRACE
docs: livepatch: move text out of code block
livepatch: Add comment to clarify klp_add_nops()
-----BEGIN PGP SIGNATURE-----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=lNTZ
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- New option "printk.debug_non_panic_cpus" allows to store printk
messages from non-panic CPUs during panic. It might be useful when
panic() fails. It is disabled by default because it increases the
chance to see the messages printed before panic() and on the
panic-CPU.
- New build option "CONFIG_NULL_TTY_DEFAULT_CONSOLE" allows to build
kernel without the virtual terminal support which prefers ttynull
over serial console.
- Do not unblank suspended consoles.
- Some code clean up.
* tag 'printk-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk/panic: Add option to allow non-panic CPUs to write to the ring buffer.
printk: Add an option to allow ttynull to be a default console device
printk: Check CON_SUSPEND when unblanking a console
printk: Rename console_start to console_resume
printk: Rename console_stop to console_suspend
printk: Rename resume_console to console_resume_all
printk: Rename suspend_console to console_suspend_all
kunit tool:
- Changes to kunit tool to use qboot on QEMU x86_64, and build GDB scripts.
- Fixes kunit tool bug in parsing test plan.
- Adds test to kunit tool to check parsing late test plan.
kunit:
- Clarifies kunit_skip() argument name.
- Adds Kunit check for the longest symbol length.
- Changes qemu_configs for sparc to use Zilog console.
-----BEGIN PGP SIGNATURE-----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=h8xS
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
"kunit tool:
- Changes to kunit tool to use qboot on QEMU x86_64, and build GDB
scripts
- Fixes kunit tool bug in parsing test plan
- Adds test to kunit tool to check parsing late test plan
kunit:
- Clarifies kunit_skip() argument name
- Adds Kunit check for the longest symbol length
- Changes qemu_configs for sparc to use Zilog console"
* tag 'linux_kselftest-kunit-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: add test to check parsing late test plan
kunit: tool: Fix bug in parsing test plan
Kunit to check the longest symbol length
kunit: Clarify kunit_skip() argument name
kunit: tool: Build GDB scripts
kunit: qemu_configs: sparc: use Zilog console
kunit: tool: Use qboot on QEMU x86_64
Fixes bugs and cleans up code in tracing, ftrace, and user_events tests.
Adds missing executables to ftrace gitignore.
-----BEGIN PGP SIGNATURE-----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=5VeG
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-next-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
- Fix bugs and clean up code in tracing, ftrace, and user_events tests
- Add missing executables to ftrace gitignore
* tag 'linux_kselftest-next-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: add 'poll' binary to gitignore
selftests/ftrace: Use readelf to find entry point in uprobe test
selftests/user_events: Fix failures caused by test code
selftests/tracing: Allow some more tests to run in instances
selftests/ftrace: Clean up triggers after setting them
selftests/tracing: Test only toplevel README file not the instances
Since the context-type additions to the virtio-gpu spec, these have been
defined locally in guest user-space, and virtio-gpu backend library code.
Now, these capsets have been stabilized, and should be defined in a
common space, in both the virtio_gpu header, and alongside the virtgpu_drm
interface that they apply to.
Reviewed-by: Gurchetan Singh <gurchetansingh@chromium.org>
Signed-off-by: Aaron Ruby <aruby@qnx.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
[dmitry.osipenko@collabora.com: edit commit title]
Link: https://patchwork.freedesktop.org/patch/msgid/YT3PR01MB5857E808EDF6949F2DF517FDAFA12@YT3PR01MB5857.CANPRD01.PROD.OUTLOOK.COM
- Fix failure of directory of log file not existing
If a LOG_FILE option is set for ktest to log its messages, and the
directory path does not exist. Then ktest fails. Have ktest attempt
to create the directory where the log file exists and if that succeeds
continue on testing.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+WDNxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quknAQDGW0MUyG3OSP1mdTm/a/kvAc4nnx8i
OBfT8ZqDPMXAhgEA2jdn/pvOmh0Nm+cofUC8tzWIdaY0Ey1r/QlCOnx4TAQ=
=QgSs
-----END PGP SIGNATURE-----
Merge tag 'ktest-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest update from Steven Rostedt:
- Fix failure of directory of log file not existing
If a LOG_FILE option is set for ktest to log its messages, and the
directory path does not exist. Then ktest fails. Have ktest attempt
to create the directory where the log file exists and if that
succeeds continue on testing.
* tag 'ktest-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Fix Test Failures Due to Missing LOG_FILE Directories
r_count is only increased when there is an oplock break wait,
so r_count inc/decrement are not paired. This can cause r_count
to become negative, which can lead to a problem where the ksmbd
thread does not terminate.
Fixes: 3aa660c059 ("ksmbd: prevent connection release during oplock break notification")
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ksmbd check that the session of second channel is in the session list of
first connection. If it is in session list, multichannel connection
should not be allowed.
Fixes: b95629435b ("ksmbd: fix racy issue from session lookup and expire")
Reported-by: Sean Heelan <seanheelan@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
In multichannel mode, UAF issue can occur in session_deregister
when the second channel sets up a session through the connection of
the first channel. session that is freed through the global session
table can be accessed again through ->sessions of connection.
Cc: stable@vger.kernel.org
Reported-by: Norbert Szetei <norbert@doyensec.com>
Tested-by: Norbert Szetei <norbert@doyensec.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
ULPs are not supposed to call to ops.* directly.
Suggested-by: Leon Romanovsky <leon@kernel.org>
Reviewed-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use aead_request_free() instead of kfree() to properly free memory
allocated by aead_request_alloc(). This ensures sensitive crypto data
is zeroed before being freed.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This reverts commit ecce70cf17.
Revert the GUID trick code causing the layering violation.
I will try to allow the users to turn RDMA-capable on/off via sysfs later
Cc: Kangjing Huang <huangkangjing@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
- Allow RTLA to collect data via BPF
The current implementation of rtla uses libtracefs and libtraceevent to
pull sample events generated by the timerlat tracer from the trace
buffer. rtla then processes the sample by updating the histogram and
summary (current, maximum, minimum, and sum values) as well as checks
if tracing has been stopped due to threshold overflow.
In use cases where a large number of samples is being generated, that
is, with measurements running on many CPUs and with a low interval,
this sample processing design causes a significant CPU load on the rtla
side. Furthermore, with >100 CPUs and 100us interval, rtla was reported
as not being able to keep up with the samples and dropping most of them,
leading to it being unusable.
Change the way the timerlat trace processes samples by attaching
a BPF program to the trace event using the BPF skeleton feature of bpftool.
Unlike the current implementation, the BPF implementation does not check
whether tracing is stopped (in BPF mode, tracing is always off to improve
performance), but waits for a write to a BPF ringbuffer instead. This allows
rtla to exit immediately when a threshold is violated, without waiting
for the next iteration of the while loop.
If the requirements for the BPF implementation are not met, either at
build time or at run time, the current implementation is used as
fallback. Which implementation is being used can be seen when running
rtla timerlat with "-D" option. rtla can be forced to run in non-BPF
mode by setting the RTLA_NO_BPF option to 1, for debugging purposes.
- Fix LD_FLAGS from being dropped in build
- Refactor code to remove duplication of save_trace_to_file
- Always set options and do not rely on default settings
Do not rely on the default kernel settings of the tracers when
starting. They could have been changed by the user which gives
inconsistent results. Always set the options that rtla expects.
- Add creation of ctags and TAGS for traversing code
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+WBgRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qg54AQDCOChaSSBiUkD0VoPKIeDMlPfvO5Qz
Xvrst5gtopfKFgEA12/9Lll/sh1eoc4saeGBooNY48HBUMjmX3KNFB14PQg=
=aHFu
-----END PGP SIGNATURE-----
Merge tag 'trace-tools-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tooling updates from Steven Rostedt:
- Allow RTLA to collect data via BPF
The current implementation of rtla uses libtracefs and libtraceevent
to pull sample events generated by the timerlat tracer from the trace
buffer. rtla then processes the sample by updating the histogram and
summary (current, maximum, minimum, and sum values) as well as checks
if tracing has been stopped due to threshold overflow.
In use cases where a large number of samples is being generated, that
is, with measurements running on many CPUs and with a low interval,
this sample processing design causes a significant CPU load on the
rtla side. Furthermore, with >100 CPUs and 100us interval, rtla was
reported as not being able to keep up with the samples and dropping
most of them, leading to it being unusable.
Change the way the timerlat trace processes samples by attaching a
BPF program to the trace event using the BPF skeleton feature of
bpftool. Unlike the current implementation, the BPF implementation
does not check whether tracing is stopped (in BPF mode, tracing is
always off to improve performance), but waits for a write to a BPF
ringbuffer instead. This allows rtla to exit immediately when a
threshold is violated, without waiting for the next iteration of the
while loop.
If the requirements for the BPF implementation are not met, either at
build time or at run time, the current implementation is used as
fallback. Which implementation is being used can be seen when running
rtla timerlat with "-D" option. rtla can be forced to run in non-BPF
mode by setting the RTLA_NO_BPF option to 1, for debugging purposes.
- Fix LD_FLAGS from being dropped in build
- Refactor code to remove duplication of save_trace_to_file
- Always set options and do not rely on default settings
Do not rely on the default kernel settings of the tracers when
starting. They could have been changed by the user which gives
inconsistent results. Always set the options that rtla expects.
- Add creation of ctags and TAGS for traversing code
* tag 'trace-tools-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla: Add the ability to create ctags and etags
rtla/tests: Test setting default options
rtla/tests: Reset osnoise options before check
rtla: Always set all tracer options
rtla/osnoise: Set OSNOISE_WORKLOAD to true
rtla: Unify apply_config between top and hist
rtla/osnoise: Unify params struct
rtla: Fix segfault in save_trace_to_file call
tools/build: Use SYSTEM_BPFTOOL for system bpftool
rtla: Refactor save_trace_to_file
tools/rv: Keep user LDFLAGS in build
rtla/timerlat: Test BPF mode
rtla/timerlat_top: Use BPF to collect samples
rtla/timerlat_top: Move divisor to update
rtla/timerlat_hist: Use BPF to collect samples
rtla/timerlat: Add BPF skeleton to collect samples
rtla: Add optional dependency on BPF tooling
tools/build: Add bpftool-skeletons feature test
rtla/timerlat: Unify params struct
- Add option traceoff_after_boot
In order to debug kernel boot, it sometimes is helpful to enable tracing
via the kernel command line. Unfortunately, by the time the login prompt
appears, the trace is overwritten by the init process and other user space
start up applications. Adding a "traceoff_after_boot" will disable tracing
when the kernel passes control to init which will allow developers to be
able to see the traces that occurred during boot.
- Clean up the mmflags macros that display the GFP flags in trace events
The macros to print the GFP flags for trace events had a bit of
duplication. The code was restructured to remove duplication and in the
process it also adds some flags that were missed before.
- Removed some dead code and scripts/draw_functrace.py
draw_functrace.py hasn't worked in years and as nobody complained
about it, remove it.
- Constify struct event_trigger_ops
The event_trigger_ops is just a structure that has function pointers that
are assigned when the variables are created. These variables should all be
constants.
- Other minor clean ups and fixes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+V9IhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qr4RAP9JhE3n69pGuOVaJTN/LGLr2Axl59n4
KqZSZS1nUM76/gD6AxYpR7nxyxgJ7VjNkLptS9tSjJVdPDxGAl0v3eO04w4=
=SU30
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Add option traceoff_after_boot
In order to debug kernel boot, it sometimes is helpful to enable
tracing via the kernel command line. Unfortunately, by the time the
login prompt appears, the trace is overwritten by the init process
and other user space start up applications.
Adding a "traceoff_after_boot" will disable tracing when the kernel
passes control to init which will allow developers to be able to see
the traces that occurred during boot.
- Clean up the mmflags macros that display the GFP flags in trace
events
The macros to print the GFP flags for trace events had a bit of
duplication. The code was restructured to remove duplication and in
the process it also adds some flags that were missed before.
- Removed some dead code and scripts/draw_functrace.py
draw_functrace.py hasn't worked in years and as nobody complained
about it, remove it.
- Constify struct event_trigger_ops
The event_trigger_ops is just a structure that has function pointers
that are assigned when the variables are created. These variables
should all be constants.
- Other minor clean ups and fixes
* tag 'trace-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Replace strncpy with memcpy for fixed-length substring copy
tracing: Fix synth event printk format for str fields
tracing: Do not use PERF enums when perf is not defined
tracing: Ensure module defining synth event cannot be unloaded while tracing
tracing: fix return value in __ftrace_event_enable_disable for TRACE_REG_UNREGISTER
tracing/osnoise: Fix possible recursive locking for cpus_read_lock()
tracing: Align synth event print fmt
tracing: gfp: vsprintf: Do not print "none" when using %pGg printf format
tracepoint: Print the function symbol when tracepoint_debug is set
tracing: Constify struct event_trigger_ops
scripts/tracing: Remove scripts/tracing/draw_functrace.py
tracing: Update MAINTAINERS file to include tracepoint.c
tracing/user_events: Slightly simplify user_seq_show()
tracing/user_events: Don't use %pK through printk
tracing: gfp: Remove duplication of recording GFP flags
tracing: Remove orphaned event_trace_printk
ring-buffer: Fix typo in comment about header page pointer
tracing: Add traceoff_after_boot option
- Add some trace events to osnoise and timerlat sample generation
This adds more information to the osnoise and timerlat tracers as well as
allows BPF programs to be attached to these locations to extract even more
data.
- Fix to DECLARE_TRACE_CONDITION() macro
It wasn't used but now will be and it happened to be broken causing the
build to fail.
- Add scheduler specification monitors to runtime verifier (RV)
This is a continuation of Daniel Bristot's work.
RV allows monitors to run and react concurrently. Running the cumulative
model is equivalent to running single components using the same
reactors, with the advantage that it's easier to point out which
specification failed in case of error.
This update introduces nested monitors to RV, in short, the sysfs
monitor folder will contain a monitor named sched, which is nothing but
an empty container for other monitors. Controlling the sched monitor
(enable, disable, set reactors) controls all nested monitors.
The following scheduling monitors are added:
* sco: scheduling context operations
Monitor to ensure sched_set_state happens only in thread context
* tss: task switch while scheduling
Monitor to ensure sched_switch happens only in scheduling context
* snroc: set non runnable on its own context
Monitor to ensure set_state happens only in the respective task's context
* scpd: schedule called with preemption disabled
Monitor to ensure schedule is called with preemption disabled
* snep: schedule does not enable preempt
Monitor to ensure schedule does not enable preempt
* sncid: schedule not called with interrupt disabled
Monitor to ensure schedule is not called with interrupt disabled
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+QhuxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qg62AP9bkeNDbiCuAqjZGddV09Hw26wC3yum
kQoNSebD8G52rQEA9GDjK37xGzYwW/fJokhJVTV39qfub6inAJE5dS6WeQY=
=8Ikv
-----END PGP SIGNATURE-----
Merge tag 'trace-latency-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull latency tracing updates from Steven Rostedt:
- Add some trace events to osnoise and timerlat sample generation
This adds more information to the osnoise and timerlat tracers as
well as allows BPF programs to be attached to these locations to
extract even more data.
- Fix to DECLARE_TRACE_CONDITION() macro
It wasn't used but now will be and it happened to be broken causing
the build to fail.
- Add scheduler specification monitors to runtime verifier (RV)
This is a continuation of Daniel Bristot's work.
RV allows monitors to run and react concurrently. Running the
cumulative model is equivalent to running single components using the
same reactors, with the advantage that it's easier to point out which
specification failed in case of error.
This update introduces nested monitors to RV, in short, the sysfs
monitor folder will contain a monitor named sched, which is nothing
but an empty container for other monitors. Controlling the sched
monitor (enable, disable, set reactors) controls all nested monitors.
The following scheduling monitors are added:
- sco: scheduling context operations
Monitor to ensure sched_set_state happens only in thread context
- tss: task switch while scheduling
Monitor to ensure sched_switch happens only in scheduling context
- snroc: set non runnable on its own context
Monitor to ensure set_state happens only in the respective task's context
- scpd: schedule called with preemption disabled
Monitor to ensure schedule is called with preemption disabled
- snep: schedule does not enable preempt
Monitor to ensure schedule does not enable preempt
- sncid: schedule not called with interrupt disabled
Monitor to ensure schedule is not called with interrupt disabled
* tag 'trace-latency-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/rv: Allow rv list to filter for container
Documentation/rv: Add docs for the sched monitors
verification/dot2k: Add support for nested monitors
tools/rv: Add support for nested monitors
rv: Add scpd, snep and sncid per-cpu monitors
rv: Add snroc per-task monitor
rv: Add sco and tss per-cpu monitors
rv: Add option for nested monitors and include sched
sched: Add sched tracepoints for RV task model
rv: Add license identifiers to monitor files
tracing: Fix DECLARE_TRACE_CONDITION
trace/osnoise: Add trace events for samples
- Record function parameters for function and function graph tracers
An option has been added to function tracer (func-args) and the function
graph tracer (funcgraph-args) that when set, the tracers will record the
registers that hold the arguments into each function event. On reading of
the trace, it will use BTF to print those arguments. Most archs support up
to 6 arguments (depending on the complexity of the arguments) and those
are printed. If a function has more arguments then what was recorded, the
output will end with " ... )".
Example of function graph tracer:
6) | dummy_xmit [dummy](skb = 0x8887c100, dev = 0x872ca000) {
6) | consume_skb(skb = 0x8887c100) {
6) | skb_release_head_state(skb = 0x8887c100) {
6) 0.178 us | sock_wfree(skb = 0x8887c100)
6) 0.627 us | }
- The rest of the changes are minor clean ups and fixes
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+M9vRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qrBGAP9NTn4Lpci69n8FJGfz+UKUEKbzOOeg
QrkIZIxbm8N56gEA0RaUionWjt1znZXUdBTsE3h+en/Ik0//VZytQcmJBwM=
=fxuG
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt:
- Record function parameters for function and function graph tracers
An option has been added to function tracer (func-args) and the
function graph tracer (funcgraph-args) that when set, the tracers
will record the registers that hold the arguments into each function
event. On reading of the trace, it will use BTF to print those
arguments. Most archs support up to 6 arguments (depending on the
complexity of the arguments) and those are printed.
If a function has more arguments then what was recorded, the output
will end with " ... )".
Example of function graph tracer:
6) | dummy_xmit [dummy](skb = 0x8887c100, dev = 0x872ca000) {
6) | consume_skb(skb = 0x8887c100) {
6) | skb_release_head_state(skb = 0x8887c100) {
6) 0.178 us | sock_wfree(skb = 0x8887c100)
6) 0.627 us | }
- The rest of the changes are minor clean ups and fixes
* tag 'ftrace-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Use hashtable.h for event_hash
tracing: Fix use-after-free in print_graph_function_flags during tracer switching
function_graph: Remove the unused variable func
ftrace: Add arguments to function tracer
ftrace: Have funcgraph-args take affect during tracing
ftrace: Add support for function argument to graph tracer
ftrace: Add print_function_args()
ftrace: Have ftrace_free_filter() WARN and exit if ops is active
fgraph: Correct typo in ftrace_return_to_handler comment
Extend the DMA mask to 36 bits to avoid using bounce buffers on machines
without an iommu (under OS control) similar to what was done for ath11k
in commit dbd73acb22 ("wifi: ath11k: enable 36 bit mask for stream
DMA").
This specifically avoids using bounce buffers on Qualcomm Snapdragon X
Elite machines like the Lenovo ThinkPad T14s when running at EL1.
Note that the mask could possibly be extended further but unresolved DMA
issues with 64 GiB X Elite machines currently prevents that from being
tested.
Also note that the driver is limited to 32 bits for coherent
allocations and that there is no need to check for errors when setting
masks larger than 32 bits.
Tested-on: WCN7850 hw2.0 WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com>
Tested-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://patch.msgid.link/20250321162331.19507-1-johan+linaro@kernel.org
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, the monitor interface is not supported. To support the monitor
interface, configure the monitor vdev state identifier, configure the HTT
filter setup, subscribe the mac80211 NO_VIRTUAL_MONITOR feature, remove
the VIRTUAL_MONITOR handler procedures since align to NO_VIRTUAL_MONITOR
feature and prevent monitor interface to transmit packet. Therefore, add
these procedures to add monitor interface support and enable the monitor
interface support on the QCN9274 platform through the hardware parameter.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250324062518.2752822-11-quic_periyasa@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, VIRTUAL monitor handling is present. In multi radio model,
VIRTUAL monitor is not suitable since each radio needs a separate VIF and
channel context. Therefore, switch to NO_VIRTUAL_MONITOR feature. Remove
the monitor_conf_enabled flag and mac_op_config() handler as they are not
need for the NO_VIRTUAL_MONITOR feature. In NO_VIRTUAL_MONITOR handling,
each interface creation/deletion triggers the mac_op_add_interface() /
mac_op_remove_interface() callback. Consequently, remove the monitor vdev
create/delete/start/stop from the other vdev type handlers.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250324062518.2752822-10-quic_periyasa@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, the monitor start procedure use the iteration callback to pick
the last available channel definition in the mac80211 hardware. This
approach is incorrect for the single wiphy model, as it holds multiple
radio/link channel contexts within the same mac80211 hardware. To fix this,
change the iteration callback to pick the specific channel context for the
given radio/link. This approach makes the monitor start procedure
compatible with both multi wiphy and single wiphy models.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://patch.msgid.link/20250324062518.2752822-9-quic_periyasa@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, when ath12k_mac_assign_vif_to_vdev() fails, the radio handle
(ar) gets accessed from the link VIF handle (arvif) for debug logging, This
is incorrect. In the fail scenario, radio handle is NULL. Fix the NULL
access, avoid radio handle access by moving to the hardware debug logging
helper function (ath12k_hw_warn).
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Fixes: 90570ba461 ("wifi: ath12k: do not return invalid link id for scan link")
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://patch.msgid.link/20250324062518.2752822-8-quic_periyasa@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, the packet offset and FCS length are fetched from the MSDU Rx
TLV data, a logic inherited from ath11k. However, for ath12k 802.11be
hardware, the Rx TLV will not be present in the MSDU data. Instead, this
information is constant. Therefore, remove the existing FCS trim and the
packet offset fetch code. Handle the packet offset with the constant in
the merge MSDU procedure.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Tested-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://patch.msgid.link/20250324062518.2752822-7-quic_periyasa@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, in the monitor Rx path, status is filled from the RX TLV header
present in the MSDU data. This logic is inherited from ath11k. However, in
the ath12k 802.11be hardware, the Rx TLV header is not present in the MSDU
data. This information is reported under various TLV tags. Therefore, avoid
the existing status filling by accumulating the needed information in the
PPDU information structure and fill the status.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Tested-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://patch.msgid.link/20250324062518.2752822-6-quic_periyasa@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, band define and enum are with the word 'G'. Replace it with
more appropriate 'GHZ' for clarity and correctness.
No functional changes. Only compile tested.
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://patch.msgid.link/20250324062518.2752822-5-quic_periyasa@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, error bitmap and decap format information are fetched from the
MSDU Rx TLV data. This logic is inherited from ath11k. However, for ath12k
802.11be hardware, the Rx TLV will not be present in the MSDU data.
Instead, this information is reported separately under the MSDU END TLV
tag. Therefore, remove the existing fetch code, handle the MSDU END TLV
tag and fetch the above information to store it in the mon_mpdu data
structure for use in the merge MSDU procedure.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Tested-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://patch.msgid.link/20250324062518.2752822-4-quic_periyasa@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, the monitor Rx parser handler is inherited from the ath11k.
However, the ath12k 802.11be hardware does not report the Rx TLV header
in the MSDU data. Instead, the hardware reports those TLVs under the
following TLV tags:
1. Buffer address
2. MPDU start
3. MPDU end
4. MSDU end
Therefore, add support for parsing the above TLVs in the Rx monitor path
and use this information for MSDU buffer and status updates.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Tested-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://patch.msgid.link/20250324062518.2752822-3-quic_periyasa@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, the link_valid field is not initialized in the monitor Rx path.
This can result in random values for the link_valid and link_id leads to
undefined behaviour in mac80211. Therefore, initialize the link_valid
field in the monitor Rx path.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Tested-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://patch.msgid.link/20250324062518.2752822-2-quic_periyasa@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
- Implement arm64 build time sorting of the mcount location table
When gcc is used to build arm64, the mcount_loc section is all zeros in
the vmlinux elf file. The addresses are stored in the Elf_Rela location.
To sort at build time, an array is allocated and the addresses are added
to it via the content of the mcount_loc section as well as he Elf_Rela
data. After sorting, the information is put back into the Elf_Rela which
now has the section sorted.
- Make sorting of mcount location table for arm64 work with clang as well
When clang is used, the mcount_loc section contains the addresses, unlike
the gcc build. An array is still created and the sorting works for both
methods.
- Remove weak functions from the mcount_loc section
Have the sorttable code pass in the data of functions defined via nm -S
which shows the functions as well as their sizes. Using this information
the sorttable code can determine if a function in the mcount_loc section
was weak and overridden. If the function is not found, it is set to be
zero. On boot, when the mcount_loc section is read and the ftrace table is
created, if the address in the mcount_loc is not in the kernel core text
then it is removed and not added to the ftrace_filter_functions (the
functions that can be attached by ftrace callbacks).
- Update and fix the reporting of how much data is used for ftrace functions
On boot, a report of how many pages were used by the ftrace table as well
as how they were grouped (the table holds a list of sections that are
groups of pages that were able to be allocated). The removing of the weak
functions required the accounting to be updated.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+MnThQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qivsAQDhPOCaONai7rvHX9T1aOHGjdajZ7SI
qoZgBOsc2ZUkoQD/U2M/m7Yof9aR4I+VFKtT5NsAwpfqPSOL/t/1j6UEOQ8=
=45AV
-----END PGP SIGNATURE-----
Merge tag 'trace-sorttable-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing / sorttable updates from Steven Rostedt:
- Implement arm64 build time sorting of the mcount location table
When gcc is used to build arm64, the mcount_loc section is all zeros
in the vmlinux elf file. The addresses are stored in the Elf_Rela
location.
To sort at build time, an array is allocated and the addresses are
added to it via the content of the mcount_loc section as well as he
Elf_Rela data. After sorting, the information is put back into the
Elf_Rela which now has the section sorted.
- Make sorting of mcount location table for arm64 work with clang as
well
When clang is used, the mcount_loc section contains the addresses,
unlike the gcc build. An array is still created and the sorting works
for both methods.
- Remove weak functions from the mcount_loc section
Have the sorttable code pass in the data of functions defined via
'nm -S' which shows the functions as well as their sizes. Using this
information the sorttable code can determine if a function in the
mcount_loc section was weak and overridden. If the function is not
found, it is set to be zero. On boot, when the mcount_loc section is
read and the ftrace table is created, if the address in the
mcount_loc is not in the kernel core text then it is removed and not
added to the ftrace_filter_functions (the functions that can be
attached by ftrace callbacks).
- Update and fix the reporting of how much data is used for ftrace
functions
On boot, a report of how many pages were used by the ftrace table as
well as how they were grouped (the table holds a list of sections
that are groups of pages that were able to be allocated). The
removing of the weak functions required the accounting to be updated.
* tag 'trace-sorttable-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
scripts/sorttable: Allow matches to functions before function entry
scripts/sorttable: Use normal sort if theres no relocs in the mcount section
ftrace: Check against is_kernel_text() instead of kaslr_offset()
ftrace: Test mcount_loc addr before calling ftrace_call_addr()
ftrace: Have ftrace pages output reflect freed pages
ftrace: Update the mcount_loc check of skipped entries
scripts/sorttable: Zero out weak functions in mcount_loc table
scripts/sorttable: Always use an array for the mcount_loc sorting
scripts/sorttable: Have mcount rela sort use direct values
arm64: scripts/sorttable: Implement sorting mcount_loc at boot for arm64
