In clustermd, separate write-intent-bitmaps are used for each cluster
node:
0 4k 8k 12k
-------------------------------------------------------------------
| idle | md super | bm super [0] + bits |
| bm bits[0, contd] | bm super[1] + bits | bm bits[1, contd] |
| bm super[2] + bits | bm bits [2, contd] | bm super[3] + bits |
| bm bits [3, contd] | | |
So in node 1, pg_index in __write_sb_page() could equal to
bitmap->storage.file_pages. Then bitmap_limit will be calculated to
0. md_super_write() will be called with 0 size.
That means the first 4k sb area of node 1 will never be updated
through filemap_write_page().
This bug causes hang of mdadm/clustermd_tests/01r1_Grow_resize.
Here use (pg_index % bitmap->storage.file_pages) to make calculation
of bitmap_limit correct.
Fixes: ab99a87542 ("md/md-bitmap: fix writing non bitmap pages")
Signed-off-by: Su Yue <glass.su@suse.com>
Reviewed-by: Heming Zhao <heming.zhao@suse.com>
Link: https://lore.kernel.org/linux-raid/20250303033918.32136-1-glass.su@suse.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Shorten cmma_test_essa() and use regular EX_TABLE program check handling.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
If blk-wbt is enabled by default, it's found that raid write performance
is quite bad because all IO are throttled by wbt of underlying disks,
due to flag REQ_IDLE is ignored. And turns out this behaviour exist since
blk-wbt is introduced.
Other than REQ_IDLE, other flags should not be ignored as well, for
example REQ_META can be set for filesystems, clearing it can cause priority
reverse problems; And REQ_NOWAIT should not be cleared as well, because
io will wait instead of failing directly in underlying disks.
Fix those problems by keep IO flags from master bio.
Fises: f51d46d0e7 ("md: add support for REQ_NOWAIT")
Fixes: e34cbd3074 ("blk-wbt: add general throttling mechanism")
Fixes: 5404bc7a87 ("[PATCH] Allow file systems to differentiate between data and meta reads")
Link: https://lore.kernel.org/linux-raid/20250227121657.832356-1-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
During code review, it's found that other than raid5_bitmap_sector(),
reshape_progress is always checked before get_reshape_loc(), while
raid5_bitmap_sector() should check as well to prevent holding the
lock 'conf->device_lock'. Hence merge that checking inside
get_reshape_loc().
Link: https://lore.kernel.org/linux-raid/20250227120452.808503-1-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
While iterating all_mddevs list from md_notify_reboot() and md_exit(),
list_for_each_entry_safe is used, and this can race with deletint the
next mddev, causing UAF:
t1:
spin_lock
//list_for_each_entry_safe(mddev, n, ...)
mddev_get(mddev1)
// assume mddev2 is the next entry
spin_unlock
t2:
//remove mddev2
...
mddev_free
spin_lock
list_del
spin_unlock
kfree(mddev2)
mddev_put(mddev1)
spin_lock
//continue dereference mddev2->all_mddevs
The old helper for_each_mddev() actually grab the reference of mddev2
while holding the lock, to prevent from being freed. This problem can be
fixed the same way, however, the code will be complex.
Hence switch to use list_for_each_entry, in this case mddev_put() can free
the mddev1 and it's not safe as well. Refer to md_seq_show(), also factor
out a helper mddev_put_locked() to fix this problem.
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/linux-raid/20250220124348.845222-1-yukuai1@huaweicloud.com
Fixes: f265143422 ("md: stop using for_each_mddev in md_notify_reboot")
Fixes: 16648bac86 ("md: stop using for_each_mddev in md_exit")
Reported-and-tested-by: Guillaume Morin <guillaume@morinfr.org>
Closes: https://lore.kernel.org/all/Z7Y0SURoA8xwg7vn@bender.morinfr.org/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
To make code cleaner, and prepare to add kconfig for bitmap.
Also remove the unsed global variables pers_lock, md_cluster_ops and
md_cluster_mod, and exported symbols register_md_cluster_operations(),
unregister_md_cluster_operations() and md_cluster_ops.
Link: https://lore.kernel.org/linux-raid/20250215092225.2427977-8-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Su Yue <glass.su@suse.com>
Add a new field 'cluster_ops' and initialize it md_setup_cluster(), so
that the gloable variable 'md_cluter_ops' doesn't need to be exported.
Also prepare to switch md-cluster to use md_submod_head.
Link: https://lore.kernel.org/linux-raid/20250215092225.2427977-7-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Su Yue <glass.su@suse.com>
Wire up the code to print function arguments in the function tracer.
This functionality can be enabled/disabled during runtime with
options/func-args.
ping-689 [004] b.... 77.170220: dummy_xmit(skb = 0x82904800, dev = 0x882d0000) <-dev_hard_start_xmit
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Guo Ren <guoren@kernel.org>
Cc: Donglin Peng <dolinux.peng@gmail.com>
Cc: Zheng Yejian <zhengyejian@huaweicloud.com>
Link: https://lore.kernel.org/20250227185823.154996172@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Co-developed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently, when function_graph is started, it looks at the option
funcgraph-args, and if it is set, it will enable tracing of the arguments.
But if tracing is already running, and the user enables funcgraph-args, it
will have no effect. Instead, it should enable argument tracing when it is
enabled, even if it means disabling the function graph tracing for a short
time in order to do the transition.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Guo Ren <guoren@kernel.org>
Cc: Donglin Peng <dolinux.peng@gmail.com>
Cc: Zheng Yejian <zhengyejian@huaweicloud.com>
Link: https://lore.kernel.org/20250227185822.978998710@goodmis.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Wire up the code to print function arguments in the function graph
tracer. This functionality can be enabled/disabled during runtime with
options/funcgraph-args.
Example usage:
6) | dummy_xmit [dummy](skb = 0x8887c100, dev = 0x872ca000) {
6) | consume_skb(skb = 0x8887c100) {
6) | skb_release_head_state(skb = 0x8887c100) {
6) 0.178 us | sock_wfree(skb = 0x8887c100)
6) 0.627 us | }
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Guo Ren <guoren@kernel.org>
Cc: Donglin Peng <dolinux.peng@gmail.com>
Cc: Zheng Yejian <zhengyejian@huaweicloud.com>
Link: https://lore.kernel.org/20250227185822.810321199@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Co-developed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a function to decode argument types with the help of BTF. Will
be used to display arguments in the function and function graph
tracer.
It can only handle simply arguments and up to FTRACE_REGS_MAX_ARGS number
of arguments. When it hits a max, it will print ", ...":
page_to_skb(vi=0xffff8d53842dc980, rq=0xffff8d53843a0800, page=0xfffffc2e04337c00, offset=6160, len=64, truesize=1536, ...)
And if it hits an argument that is not recognized, it will print the raw
value and the type of argument it is:
make_vfsuid(idmap=0xffffffff87f99db8, fs_userns=0xffffffff87e543c0, kuid=0x0 (STRUCT))
__pti_set_user_pgtbl(pgdp=0xffff8d5384ab47f8, pgd=0x110e74067 (STRUCT))
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Guo Ren <guoren@kernel.org>
Cc: Donglin Peng <dolinux.peng@gmail.com>
Cc: Zheng Yejian <zhengyejian@huaweicloud.com>
Link: https://lore.kernel.org/20250227185822.639418500@goodmis.org
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Co-developed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The ftrace_free_filter() is used to reset the ops filters. But it must be
done if the ops is not currently active (tracing). If it is, it will mess
up the ftrace accounting of what functions are attached and what is not.
WARN and exit the ftrace_free_filter() if the ops is active when it is
called.
Currently, it doesn't seem if anything does this, but it may in the
future.
Link: https://lore.kernel.org/all/20250219095330.2e9f171c@gandalf.local.home/
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250219135040.3a9fbe00@gandalf.local.home
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
md-cluster is only supportted by raid1 and raid10, there is no need to
include md-cluster.h for other personalities.
Also move APIs that is only used in md-cluster.c from md.h to
md-cluster.h.
Link: https://lore.kernel.org/linux-raid/20250215092225.2427977-3-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Su Yue <glass.su@suse.com>
- pers_lock() are held and released from caller
- try_module_get() is called from caller
- error message from caller
Merge above code into find_pers(), and rename it to get_pers(), also
add a wrapper to module_put() as put_pers().
Link: https://lore.kernel.org/linux-raid/20250215092225.2427977-2-yukuai1@huaweicloud.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Su Yue <glass.su@suse.com>
The early boot code contains various open-coded inline assemblies with
exception handling. In order to handle possible exceptions each of them
changes the program check new psw, and restores it.
In order to simplify the various inline assemblies add simple exception
table support: the program check handler is called with a fully populated
pt_regs on the stack and may change the psw and register members. When the
program check handler returns the psw and registers from pt_regs will be
used to continue execution.
The program check handler searches the exception table for an entry which
matches the address of the program check. If such an entry is found the psw
address within pt_regs on the stack is replaced with a fixup address, and
execution continues at the new address.
If no entry is found the psw is changed to a disabled wait psw and
execution stops.
Before entering the C part of the program check handler the address of the
program check new psw is replaced to a minimalistic handler.
This is supposed to help against program check loops. If an exception
happens while in program check processing the register contents of the
original exception are restored and a disabled wait psw is loaded.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Setup a pt_regs structure on the stack, poplulate it in low level assembler
code, and pass it to print_pgm_check_info(). This way there is no need to
access then lowcore from print_pgm_check_info() anymore, and the function
looks like a normal program check handler function.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Avoid confusion and rename __LC_PGM_INT_CODE since it correlates to the
pgm_code member of struct lowcore, and not the pgm_int_code member.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
A few include directives use the local search variant even though the files
to be included aren't local. Therefore use the normal system header file
variant of the include directive.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
mmap_base() has logic to ensure that the variable "gap" stays within the
range defined by "gap_min" and "gap_max". Replace this with the clamp()
macro to shorten and simplify code.
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Link: https://lore.kernel.org/r/20250204162508.12335-1-qasdev00@gmail.com
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
[gor@linux.ibm.com: also remove the gap_min and gap_max variables]
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The check for get_zeroed_page() leads to a direct return
and overlooked the memory leak caused by loop allocation.
Add a free helper to free spaces allocated by get_zeroed_page().
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20250218034104.2436469-1-haoxiang_li2024@163.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add check for the return value of get_zeroed_page() in
sclp_console_init() to prevent null pointer dereference.
Furthermore, to solve the memory leak caused by the loop
allocation, add a free helper to do the free job.
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20250218025216.2421548-1-haoxiang_li2024@163.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Similar to x86 and loongarch add a "debug-alternative" command line
parameter, which allows for alternative debugging. The parameter
itself comes with architecture specific semantics:
"debug-alternative"
-> print debug message for every single alternative
"debug-alternative=0;2"
-> print debug message for all alternatives with type 0 and 2
"debug-alternative=0:0-7"
-> print debug message for all alternatives with type 0 which have a
facility number within the range of 0-7
"debug-alternative=0:!8;1"
-> print debug message for all alternatives with type 0, for all
facility numbers, except facility 8, and in addition print all
alternatives with type 1
A defconfig build currently results in a kernel with more than 20.000
alternatives, where the majority is for the niai alternative (spinlocks),
and the relocated lowcore alternative. The following kernel command like
options limit alternative debug output, and enable dynamic debug messages:
debug-alternative=0:!49;1:!0
earlyprintk
bootdebug
ignore_loglevel
loglevel=8
dyndbg="file alternative.c +p"
This results in output like this:
alt: [0/ 11] 0000021b9ce8680c: c0f400000089 -> c00400000000
alt: [0/ 64] 0000021b9ce87e60: c0f400000043 -> c00400000000
alt: [0/133] 0000021b9ce88c56: c0f400000027 -> c00400000000
alt: [0/ 74] 0000021b9ce89410: c0f40000002a -> c00400000000
alt: [0/ 40] 0000021b9dc3720a: 47000000 -> b280d398
alt: [0/193] 0000021b9dc37306: 47000000 -> b201d2b0
alt: [0/193] 0000021b9dc37354: c00400000000 -> d20720c0d2b0
alt: [1/ 5] 0000038d720d7bf2: c0f400000016 -> c00400000000
With
[<alternative type>/<alternative data>] <address> oldcode -> newcode
Alternative data depends on the alternative type: for type 0
(ALT_TYPE_FACILITY) data is the facility. For type 1 (ALT_TYPE_FEATURE)
data is the corresponding machine feature.
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Make decompressor_handled_param() a wrapper for
__decompressor_handled_param(). __decompressor_handled_param() now
takes two parameters: a function name and a parameter name, which do
not necessarily match.
This allows to use characters like "-", which are not allowed in
function names, for command line parameters which are handled by the
decompressor and should be ignored by the kernel.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Get rid of the cpu_has_bear jump label and convert cpu_has_bear() to a cpu
feature function using test_facility() and with that use a static branch.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Instead of having a private cpu_has_vx() implementation use the new common
cpu feature method. Move the facility detection to the decompressor so it
matches all other cpu features.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Move machine type detection to the decompressor and use static branches
to implement and use machine_is_[lpar|vm|kvm]() instead of a runtime check
via MACHINE_IS_[LPAR|VM|KVM].
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Move stsi() inline assembly to header file so it is possible to use it
also for the decompressor.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Merge stsi() and __stsi() and cleanup the inline assembly. This involves
making use of the flag output constraint. Semantically the result is
identical to before.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The exception handling for __stsi() was added in 2001 when it still was
possible to run Linux on systems without LPAR hypervisor, and therefore
without an stsi instruction. Given that this is not supported anymore
remove the exception handling from the __stsi() inline assembly.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use static branch(es) to implement and use machine_has_diag9c() instead of
a runtime check via MACHINE_HAS_DIAG9C.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use static branch(es) to implement and use machine_has_esop() instead
of a runtime check via MACHINE_HAS_ESOP.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use static branch(es) to implement and use machine_has_tx() instead of
a runtime check with MACHINE_HAS_TE.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use static branch(es) to implement and use machine_has_tlb_guest()
instead of a runtime check via MACHINE_HAS_TLB_GUEST.
Also add sclp_early_detect_machine_features() in order to allow for
feature detection from the decompressor.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use static branch(es) to implement and use machine_has_scc() instead
of a runtime check via MACHINE_HAS_SCC.
This comes with a cleanup of early time initialization: the initial
tod_clock_base value is now passed via the bootdata mechanism, instead
of using absolute lowcore as transport vehicle from the decompressor
to the kernel.
Also the early tod clock initialization is moved to the decompressor
which allows to use a static branch with machine_has_scc() within the
kernel.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Convert the explicit relocated lowcore alternative type to a more
generic machine feature. This only reduces the number of alternative
types, but has no impact on code generation.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Provide infrastructure which allows to generate machine_has_<feature>()
functions, which are replacing the existing MACHINE_HAS_<feature> macros.
Such function usages generate a static branch depending on <feature>. The
static branch is patched using an alternative.
Each <feature> correlates with a bit set in the machine_features bit
field. If the corresponding bit is set, the branch will be patched. In
order to have any effect on branch patching feature bits must be set with
set_machine_features() in the decompressor before alternatives patching of
the kernel image.
It is possible to use clear_machine_feature() and test_machine_feature()
for machine features which cannot be completely detected within the
decompressor, e.g. if common code command line parameters allow to enable
or disable certain features. In such cases test_machine_feature() instead
of machine_has_feature() must be used within the kernel. This results in a
runtime check and not a static branch.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Convert MACHINE_HAS_... to cpu_has_...() which uses test_facility() instead
of testing the machine_flags lowcore member if the feature is present.
test_facility() generates better code since it results in a static branch
without accessing memory. The branch is patched via alternatives by the
decompressor depending on the availability of the required facility.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Convert MACHINE_HAS_... to cpu_has_...() which uses test_facility() instead
of testing the machine_flags lowcore member if the feature is present.
test_facility() generates better code since it results in a static branch
without accessing memory. The branch is patched via alternatives by the
decompressor depending on the availability of the required facility.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Convert MACHINE_HAS_... to cpu_has_...() which uses test_facility() instead
of testing the machine_flags lowcore member if the feature is present.
test_facility() generates better code since it results in a static branch
without accessing memory. The branch is patched via alternatives by the
decompressor depending on the availability of the required facility.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Convert MACHINE_HAS_... to cpu_has_...() which uses test_facility() instead
of testing the machine_flags lowcore member if the feature is present.
test_facility() generates better code since it results in a static branch
without accessing memory. The branch is patched via alternatives by the
decompressor depending on the availability of the required facility.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Convert MACHINE_HAS_... to cpu_has_...() which uses test_facility() instead
of testing the machine_flags lowcore member if the feature is present.
test_facility() generates better code since it results in a static branch
without accessing memory. The branch is patched via alternatives by the
decompressor depending on the availability of the required facility.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Convert MACHINE_HAS_... to cpu_has_...() which uses test_facility() instead
of testing the machine_flags lowcore member if the feature is present.
test_facility() generates better code since it results in a static branch
without accessing memory. The branch is patched via alternatives by the
decompressor depending on the availability of the required facility.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Convert MACHINE_HAS_... to cpu_has_...() which uses test_facility() instead
of testing the machine_flags lowcore member if the feature is present.
test_facility() generates better code since it results in a static branch
without accessing memory. The branch is patched via alternatives by the
decompressor depending on the availability of the required facility.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Convert MACHINE_HAS_... to cpu_has_...() which uses test_facility() instead
of testing the machine_flags lowcore member if the feature is present.
test_facility() generates better code since it results in a static branch
without accessing memory. The branch is patched via alternatives by the
decompressor depending on the availability of the required facility.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Convert MACHINE_HAS_... to cpu_has_...() which uses test_facility() instead
of testing the machine_flags lowcore member if the feature is present.
test_facility() generates better code since it results in a static branch
without accessing memory. The branch is patched via alternatives by the
decompressor depending on the availability of the required facility.
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The linux390@de.ibm.com email address is outdated. It has been removed from
the MAINTAINERS file nearly 10 years ago with commit 64776820b4 ("s390:
remove generic email address from maintainers file").
Change MODULE_AUTHOR() accordingly and also use the more common
IBM Corporation company name.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
