These result in a very small reduction in driver size, but at the cost
of more complex build and slightly harder to read code. In the case of
of_match_ptr() it also prevents use of PRP0001 ACPI based identification.
In this particular case we have a valid ACPI/PNP ID that should be used
in preference to PRP0001 but doesn't mean we should prevent that route.
With this done, drop unneeded of*.h inclusions and __maybe_unused markers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250225100838.362125-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Retpoline mitigation for spectre-v2 uses thunks for indirect branches. To
support this mitigation compilers add a CS prefix with
-mindirect-branch-cs-prefix. For an indirect branch in asm, this needs to
be added manually.
CS prefix is already being added to indirect branches in asm files, but not
in inline asm. Add CS prefix to CALL_NOSPEC for inline asm as well. There
is no JMP_NOSPEC for inline asm.
Reported-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250228-call-nospec-v3-2-96599fed0f33@linux.intel.com
CALL_NOSPEC macro is used to generate Spectre-v2 mitigation friendly
indirect branches. At compile time the macro defaults to indirect branch,
and at runtime those can be patched to thunk based mitigations.
This approach is opposite of what is done for the rest of the kernel, where
the compile time default is to replace indirect calls with retpoline thunk
calls.
Make CALL_NOSPEC consistent with the rest of the kernel, default to
retpoline thunk at compile time when CONFIG_MITIGATION_RETPOLINE is
enabled.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250228-call-nospec-v3-1-96599fed0f33@linux.intel.com
`cb_mutex` was introduced in commit 9e0894d070 ("platform/x86/amd/pmf:
Enable Custom BIOS Inputs for PMF-TA") to prevent conccurrent access for
BIOS inputs. It however isn't initialized and so on use it may lead to
a NULL pointer dereference.
Add code to initialize on probe and clean up on destroy.
Reported-by: Yijun Shen <Yijun.Shen@dell.com>
Cc: Richard Gong <richgong@amd.com>
Fixes: 9e0894d070 ("platform/x86/amd/pmf: Enable Custom BIOS Inputs for PMF-TA")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-By: Yijun Shen <Yijun_Shen@Dell.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20250227170308.435862-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On architectures where ARCH_HAS_SYNC_CORE_BEFORE_USERMODE
is not selected, sync_core_before_usermode() is a no-op.
In membarrier_mm_sync_core_before_usermode() the compiler does not
eliminate redundant branches and load of mm->membarrier_state
for this case as the atomic_read() cannot be optimized away.
Here's a snippet of the code generated for finish_task_switch() on powerpc
prior to this change:
1b786c: ld r26,2624(r30) # mm = rq->prev_mm;
.......
1b78c8: cmpdi cr7,r26,0
1b78cc: beq cr7,1b78e4 <finish_task_switch+0xd0>
1b78d0: ld r9,2312(r13) # current
1b78d4: ld r9,1888(r9) # current->mm
1b78d8: cmpd cr7,r26,r9
1b78dc: beq cr7,1b7a70 <finish_task_switch+0x25c>
1b78e0: hwsync
1b78e4: cmplwi cr7,r27,128
.......
1b7a70: lwz r9,176(r26) # atomic_read(&mm->membarrier_state)
1b7a74: b 1b78e0 <finish_task_switch+0xcc>
This was found while analyzing "perf c2c" reports on kernels prior
to commit c1753fd02a ("mm: move mm_count into its own cache line")
where mm_count was false sharing with membarrier_state.
There is a minor improvement in the size of finish_task_switch().
The following are results from bloat-o-meter for ppc64le:
GCC 7.5.0
---------
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-32 (-32)
Function old new delta
finish_task_switch 884 852 -32
GCC 12.2.1
----------
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-32 (-32)
Function old new delta
finish_task_switch.isra 852 820 -32
LLVM 17.0.6
-----------
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-36 (-36)
Function old new delta
rt_mutex_schedule 120 104 -16
finish_task_switch 792 772 -20
Results on aarch64:
GCC 14.1.1
----------
add/remove: 0/2 grow/shrink: 1/1 up/down: 4/-60 (-56)
Function old new delta
get_nohz_timer_target 352 356 +4
e843419@0b02_0000d7e7_408 8 - -8
e843419@01bb_000021d2_868 8 - -8
finish_task_switch.isra 592 548 -44
Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Link: https://lore.kernel.org/r/20250303060457.531293-1-nysal@linux.ibm.com
The last use of paravirt_disable_iospace() was removed in 2015 by
commit d1c29465b8 ("lguest: don't disable iospace.")
Remove it.
Note the comment above it about 'entry.S' is unrelated to this
but stayed when intervening code got deleted.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20250303004441.250451-1-linux@treblig.org
It's undesirable to have to figure out the pxp pointer in display
code. For one thing, its type is different for i915 and xe.
Since we can figure the pxp pointer out in the pxp code from the gem
object, offload it there.
v2: Rebase
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250228114527.3091620-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
pwm-stmpe is the only driver that cannot be built as a module. Add the
necessary boilerplate to also make this driver modular.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250215143723.636591-2-u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Add support for MDB System Level Control and Status Register (SLCR)
aperture that is only supported for AMD Versal2 devices.
Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250228093351.923615-2-thippeswamy.havalige@amd.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Exynos7870 devices have a DWC3 compatible USB 2.0 controller.
Add support in the driver by:
- Adding its own compatible string, "samsung,exynos7870-dwusb3".
- Adding three USBDRD clocks named "bus_early", "ref", and "ctrl", to
be controlled by the driver.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250301-exynos7870-usb-v3-2-f01697165d19@disroot.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document compatible string for Exynos7870 DWC3-compatible USB 2.0
driver. The devicetree node requires three clocks, named "bus_early",
"ref", and "ctrl".
Unlike other variants, Exynos7870's USB controller requires a single
3.0V regulator. Assert that the other 1.0V regulator requirement is
enforced on variants individually other than Exynos7870's.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250301-exynos7870-usb-v3-1-f01697165d19@disroot.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB dwc3 core on Rockchip's RK3562 is the same as the one already
included in generic snps,dwc3. Extend the binding accordingly to allow
compatible = "rockchip,rk3562-dwc3", "snps,dwc3";
There are 4 clocks with different name sequency, add schema for it.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250227111913.2344207-10-kever.yang@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This array is only read, not modified.
Declaring data as const makes it easier to see what's going on, and can
prevent unintended writes through placement in a read-only section.
Signed-off-by: Jonathan Neuschäfer <j.ne@posteo.net>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250228-misc-const-v3-9-09b417ded9c4@posteo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These arrays are only read, not modified.
Declaring data as const makes it easier to see what's going on, and can
prevent unintended writes through placement in a read-only section.
Signed-off-by: Jonathan Neuschäfer <j.ne@posteo.net>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250228-misc-const-v3-8-09b417ded9c4@posteo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The nand_flash_ids, inquiry_response, and mode_page_01 arrays are only
read, not modified.
Declaring data as const makes it easier to see what's going on, and can
prevent unintended writes through placement in a read-only section.
Signed-off-by: Jonathan Neuschäfer <j.ne@posteo.net>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250228-misc-const-v3-7-09b417ded9c4@posteo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These arrays are only read, never modified.
Declaring data as const makes it easier to see what's going on, and can
prevent unintended writes through placement in a read-only section.
Signed-off-by: Jonathan Neuschäfer <j.ne@posteo.net>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250228-misc-const-v3-6-09b417ded9c4@posteo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
init_string is only read, not modified.
Declaring data as const makes it easier to see what's going on, and can
prevent unintended writes through placement in a read-only section.
Signed-off-by: Jonathan Neuschäfer <j.ne@posteo.net>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250228-misc-const-v3-5-09b417ded9c4@posteo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These arrays are only read, not modified.
Declaring data as const makes it easier to see what's going on, and can
prevent unintended writes through placement in a read-only section.
Signed-off-by: Jonathan Neuschäfer <j.ne@posteo.net>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250228-misc-const-v3-4-09b417ded9c4@posteo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The alauda_card_ids array is only read, and not modified.
Declaring data as const makes it easier to see what's going on, and can
prevent unintended writes through placement in a read-only section.
Signed-off-by: Jonathan Neuschäfer <j.ne@posteo.net>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250228-misc-const-v3-3-09b417ded9c4@posteo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This array is only read, not modified.
Declaring data as const makes it easier to see what's going on, and can
prevent unintended writes through placement in a read-only section.
Signed-off-by: Jonathan Neuschäfer <j.ne@posteo.net>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250228-misc-const-v3-2-09b417ded9c4@posteo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These arrays are not modified. Make them const.
Declaring data as const makes it easier to see what's going on, and can
prevent unintended writes through placement in a read-only section.
Signed-off-by: Jonathan Neuschäfer <j.ne@posteo.net>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250228-misc-const-v3-1-09b417ded9c4@posteo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If no fw_build is recognized for the controller there is no point to
exposing the `do_flash` attribute.
Add an is_visible callback to the attribute group and check for that
fw_build member to hide when not applicable.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250221054137.1631765-3-superm1@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The error `failed to get FW build information` is added for what looks
to be for misdetection of the device property firmware-name.
If the property is missing (such as on non-nvidia HW) this error shows up.
Move the error into the scope of the property parser for "firmware-name"
to avoid showing errors on systems without the firmware-name property.
Fixes: 5c9ae5a875 ("usb: typec: ucsi: ccg: add firmware flashing support")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250221054137.1631765-2-superm1@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some platforms like Marvell are cache coherent, so allow the
"dma-coherent" property.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250226214231.3745400-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
otg_ulpi_create() has been unused since 2022's
commit 8ca79aaad8 ("ARM: pxa: remove unused pxa3xx-ulpi")
Remove it.
The devm_ variant is still used.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20250223160602.91916-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The RichTek RT1711H and RT1719 chips do have a vbus pin that is
used for attach/detach detection (respectively, pin A1 and 11):
allow a vbus-supply phandle for that.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250219140143.104037-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The usb_sndaddr0pipe macro is only used in the hub_set_address function.
Replace it with usb_sndctrlpipe which provides the same functionality
but would also consider the endpoint device number.
If the device has not been initialised, it is safe to use
usb_sndctrlpipe in this context because udev->devnum is set to 0.
Therefore, this change does not affect behaviour, but reduces code
complexity by reusing the existing macro.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250219083745.10406-1-eichest@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The xHC resources allocated for USB devices are not released in correct
order after resuming in case when while suspend device was reconnected.
This issue has been detected during the fallowing scenario:
- connect hub HS to root port
- connect LS/FS device to hub port
- wait for enumeration to finish
- force host to suspend
- reconnect hub attached to root port
- wake host
For this scenario during enumeration of USB LS/FS device the Cadence xHC
reports completion error code for xHC commands because the xHC resources
used for devices has not been properly released.
XHCI specification doesn't mention that device can be reset in any order
so, we should not treat this issue as Cadence xHC controller bug.
Similar as during disconnecting in this case the device resources should
be cleared starting form the last usb device in tree toward the root hub.
To fix this issue usbcore driver should call hcd->driver->reset_device
for all USB devices connected to hub which was reconnected while
suspending.
Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/PH7PR07MB953841E38C088678ACDCF6EEDDCC2@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move hdcp_mutex, num_hdcp_streams, hdcp_auth_status, hdcp_port_data, and
hdcp_mst_type1_capable members of struct intel_digital_port under an
hdcp sub-struct to group hdcp related things together.
Rename them mutex, num_streams, auth_status, port_data, and
mst_type1_capable for clarity.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9da4be57b068acd06dec8b93977f0a70627103d4.1740746939.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Move active_mst_links, mst_encoders[], and mst_mgr members of struct
intel_dp under an mst sub-struct to group mst related things together.
Rename them active_links, stream_encoders[] and mgr for clarity.
Note that is_mst and mst_detect are not included, as they're also
relevant for non-mst. The sub-struct is for active mst.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6f282f90bfe2dd9162e2dee8f681c84313971992.1740746939.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
When performing continuous unbind/bind operations on the USB drivers
available on the Renesas RZ/G2L SoC, a kernel crash with the message
"Unable to handle kernel NULL pointer dereference at virtual address"
may occur. This issue points to the usbhsc_notify_hotplug() function.
Flush the delayed work to avoid its execution when driver resources are
unavailable.
Fixes: bc57381e63 ("usb: renesas_usbhs: use delayed_work instead of work_struct")
Cc: stable <stable@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250225110248.870417-4-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The gpriv->transceiver is retrieved in probe() through usb_get_phy() but
never released. Use devm_usb_get_phy() to handle this scenario.
This issue was identified through code investigation. No issue was found
without this change.
Fixes: b5a2875605 ("usb: renesas_usbhs: Allow an OTG PHY driver to provide VBUS")
Cc: stable <stable@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250225110248.870417-3-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the USB configuration is not valid, then avoid checking for
bmAttributes to prevent null pointer deference.
Cc: stable <stable@kernel.org>
Fixes: 40e89ff575 ("usb: gadget: Set self-powered based on MaxPower and bmAttributes")
Signed-off-by: Prashanth K <prashanth.k@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250224085604.417327-1-prashanth.k@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When adding support for USB3-over-USB4 tunnelling detection, a check
for an Intel-specific capability was added. This capability, which
goes by ID 206, is used without any check that we are actually
dealing with an Intel host.
As it turns out, the Cadence XHCI controller *also* exposes an
extended capability numbered 206 (for unknown purposes), but of
course doesn't have the Intel-specific registers that the tunnelling
code is trying to access. Fun follows.
The core of the problems is that the tunnelling code blindly uses
vendor-specific capabilities without any check (the Intel-provided
documentation I have at hand indicates that 192-255 are indeed
vendor-specific).
Restrict the detection code to Intel HW for real, preventing any
further explosion on my (non-Intel) HW.
Cc: stable <stable@kernel.org>
Fixes: 948ce83fbb ("xhci: Add USB4 tunnel detection for USB3 devices on Intel hosts")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250227194529.2288718-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for the Exynos7870 SoC pin-controller in the pinctrl driver.
It has 8 GPIO banks, and 3-bit PINCFG_TYPE_DRV width.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250301-exynos7870-pinctrl-v3-3-ba1da9d3cd2f@disroot.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The Embedded Controller in the Huawei Matebook E Go is accessible on &i2c15
and provides battery and adapter status, port orientation status, as well
as HPD event notifications for two USB Type-C port, etc.
Add the EC to the device tree and describe the relationship among
the type-c connectors, role switches, orientation switches and the QMP
combo PHY.
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250214180656.28599-4-mitltlatltl@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There are three variants of which Huawei released the first two
simultaneously.
Huawei Matebook E Go LTE(sc8180x), codename seems to be gaokun2.
Huawei Matebook E Go(sc8280xp@3.0GHz), codename must be gaokun3. (see [1])
Huawei Matebook E Go 2023(sc8280xp@2.69GHz), codename should be also gaokun3.
Adding support for the latter two variants for now, this driver should
also work for the sc8180x variant according to acpi table files, but I
don't have the device to test yet.
Different from other Qualcomm Snapdragon sc8280xp based machines, the
Huawei Matebook E Go uses an embedded controller while others use
a system called PMIC GLink. This embedded controller can be used to
perform a set of various functions, including, but not limited to:
- Battery and charger monitoring;
- Charge control and smart charge;
- Fn_lock settings;
- Tablet lid status;
- Temperature sensors;
- USB Type-C notifications (ports orientation, DP alt mode HPD);
- USB Type-C PD (according to observation, up to 48w).
Add a driver for the EC which creates devices for UCSI and power supply
devices.
This driver is inspired by the following drivers:
drivers/platform/arm64/acer-aspire1-ec.c
drivers/platform/arm64/lenovo-yoga-c630.c
drivers/platform/x86/huawei-wmi.c
Also thanks for reviewers' working. They have made this patch improve
a lot.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=219645
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250214180656.28599-3-mitltlatltl@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add binding for the EC found in the Huawei Matebook E Go and
Huawei Matebook E Go LTE 2-in-1 tablets, the former one is a QS sc8280xp
based tablet, the latter one is a QS sc8180x based tablet.
This series has a codename, gaokun. More information about gaokun, please
check https://bugzilla.kernel.org/show_bug.cgi?id=219645
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250214180656.28599-2-mitltlatltl@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Syzbot keeps reporting an issue [1] that occurs when erroneous symbols
sent from userspace get through into user_alpha2[] via
regulatory_hint_user() call. Such invalid regulatory hints should be
rejected.
While a sanity check from commit 47caf685a6 ("cfg80211: regulatory:
reject invalid hints") looks to be enough to deter these very cases,
there is a way to get around it due to 2 reasons.
1) The way isalpha() works, symbols other than latin lower and
upper letters may be used to determine a country/domain.
For instance, greek letters will also be considered upper/lower
letters and for such characters isalpha() will return true as well.
However, ISO-3166-1 alpha2 codes should only hold latin
characters.
2) While processing a user regulatory request, between
reg_process_hint_user() and regulatory_hint_user() there happens to
be a call to queue_regulatory_request() which modifies letters in
request->alpha2[] with toupper(). This works fine for latin symbols,
less so for weird letter characters from the second part of _ctype[].
Syzbot triggers a warning in is_user_regdom_saved() by first sending
over an unexpected non-latin letter that gets malformed by toupper()
into a character that ends up failing isalpha() check.
Prevent this by enhancing is_an_alpha2() to ensure that incoming
symbols are latin letters and nothing else.
[1] Syzbot report:
------------[ cut here ]------------
Unexpected user alpha2: A�
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 is_user_regdom_saved net/wireless/reg.c:440 [inline]
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_alpha2 net/wireless/reg.c:3424 [inline]
WARNING: CPU: 1 PID: 964 at net/wireless/reg.c:442 restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516
Modules linked in:
CPU: 1 UID: 0 PID: 964 Comm: kworker/1:2 Not tainted 6.12.0-rc5-syzkaller-00044-gc1e939a21eb1 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Workqueue: events_power_efficient crda_timeout_work
RIP: 0010:is_user_regdom_saved net/wireless/reg.c:440 [inline]
RIP: 0010:restore_alpha2 net/wireless/reg.c:3424 [inline]
RIP: 0010:restore_regulatory_settings+0x3c0/0x1e50 net/wireless/reg.c:3516
...
Call Trace:
<TASK>
crda_timeout_work+0x27/0x50 net/wireless/reg.c:542
process_one_work kernel/workqueue.c:3229 [inline]
process_scheduled_works+0xa65/0x1850 kernel/workqueue.c:3310
worker_thread+0x870/0xd30 kernel/workqueue.c:3391
kthread+0x2f2/0x390 kernel/kthread.c:389
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Reported-by: syzbot+e10709ac3c44f3d4e800@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e10709ac3c44f3d4e800
Fixes: 09d989d179 ("cfg80211: add regulatory hint disconnect support")
Cc: stable@kernel.org
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250228134659.1577656-1-n.zhandarovich@fintech.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
