Avoid exceptions when xsk attr is not present, and add a proper ksft
helper for "not in" condition.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We use wait_port_listen() extensively to wait for a process
we spawned to be ready. Not all processes will open listening
sockets. Add a method of explicitly waiting for a child to
be ready. Pass a FD to the spawned process and wait for it
to write a message to us. FD number is passed via KSFT_READY_FD
env variable.
Similarly use KSFT_WAIT_FD to let the child process for a sign
that we are done and child should exit. Sending a signal to
a child with shell=True can get tricky.
Make use of this method in the queues test to make it less flaky.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Separate the support check from socket binding for easier refactoring.
Use: ./helper - - just to probe if we can open the socket.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kurt and Joe report missing new line at the end of Usage.
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cfg.rpath() helper was been recently added to make formatting
paths for helper binaries easier.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Joe Damato reports that some shells will fork before running
the command when python does "sh -c $cmd", while bash on my
machine does an exec of $cmd directly.
This will have implications for our ability to terminate
the child process on various configurations of bash and
other shells. Warn about using
bkg(... shell=True, termininate=True)
most background commands can hopefully exit cleanly (exit_wait).
Link: https://lore.kernel.org/Z7Yld21sv_Ip3gQx@LQ3V64L9R2
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check size of struct mfw_hdr within firmware->size before type casting
to ensure to validly dereference fields from mfm_hdr pointer. Then,
check if signature field is equal to RTW89_MFW_SIG to assert current
is multi-firmware.
Addresses-Coverity-ID: 1494046 ("Untrusted loop bound")
Addresses-Coverity-ID: 1544385 ("Untrusted array index read")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250217064308.43559-6-pkshih@realtek.com
If failed to load a non-secure firmware with a secure chip, it only throws
a unclear message:
rtw89_8922ae 0000:03:00.0: parse fw header fail
To address this case simpler, add a message to point out this.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250217064308.43559-5-pkshih@realtek.com
The sb_sel_ver is selection version for secure boot recorded in firmware
binary data, and its size is 4 and offset is 58 (not natural alignment).
Use get_unaligned_le32() to get this value safely. Find this by reviewing.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250217064308.43559-3-pkshih@realtek.com
This patch implements USB mode setting via a sysfs interface in
cros_ec_typec driver. User-space applications can now change the current
USB mode by writing to "usb_mode" sysfs entry, replacing the previous
ioctl-based method.
The embedded controller (EC) currently supports only entering USB4 mode
and exiting all modes (including altmodes). Both of these operations
trigger Data Reset Message, even if no USB Mode is active.
Additionally, the patch exposes the USB modes supported by the port via
"usb_capability" sysfs attribute.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Link: https://lore.kernel.org/r/20250210130419.4110130-1-akuchynski@chromium.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
BT-coexistence configure WiFi TX time to share time slots with Bluetooth
devices. Since the format is different from WiFi 6 chips, add the new
format accordingly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250217063053.38936-3-pkshih@realtek.com
The agg_limit and txcnt_limit are used by BT-coexistence to reduce
WiFi TX time at once to share time with Bluetooth devices. Since
these registers address are different from WiFi 6 and 7 chips, define
them accordingly.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250217063053.38936-2-pkshih@realtek.com
A previous patch introduces a build-time warning when CONFIG_DCB
is disabled:
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c: In function 'otx2_probe':
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c:3217:1: error: label 'err_free_zc_bmap' defined but not used [-Werror=unused-label]
drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c: In function 'otx2vf_probe':
drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c:740:1: error: label 'err_free_zc_bmap' defined but not used [-Werror=unused-label]
Add the same #ifdef check around it.
Fixes: efabce2901 ("octeontx2-pf: AF_XDP zero copy receive support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Link: https://patch.msgid.link/20250219162239.1376865-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct the hardware revision check comment in the QT2025 driver. The
revision value was documented as 0x3b instead of the correct 0xb3,
which matches the actual comparison logic in the code.
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Link: https://patch.msgid.link/20250219-qt2025-comment-fix-v2-1-029f67696516@posteo.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
EHT MU PPDU contains user field of EHT-SIG field with STA-ID that
must match AID subfield in the Associate Response. Add a necessary
setting to prevent these from being inconsistent.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250217061235.32031-1-pkshih@realtek.com
Tariq Toukan says:
====================
mlx5 misc enhancements 2025-02-19
This small series enhances the mlx5 ethtool link speed code (no
functional change), in addition to a Kconfig description enhancement.
====================
Link: https://patch.msgid.link/20250219114112.403808-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function ext_requested() serves two distinct purposes: it checks
if extended link modes were requested, and it selects whether to use
extended or legacy link modes.
This change separates these two purposes. Now, ext_link_mode_requested()
is used directly for checking if extended link modes are requested,
while the selection of extended modes is handled independently based on
the autonegotiation status.
By making this distinction, the logic for determining whether to select
extended or legacy link modes is clearer.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250219114112.403808-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
eth_proto_cap parameter represents the supported link modes,
while eth_proto_admin refers to the configured ones.
The function get_advertising() retrieves the configured link
modes, thus we update its parameter name to eth_proto_admin.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250219114112.403808-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The functions ptys2ethtool_supported_link(), ptys2ethtool_adver_link()
share the same code, thus, in order to remove code duplication we
introduce a new function ptys2ethtool_process_link() to handle the
processing of both supported and advertised link modes.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250219114112.403808-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function ptys2ethtool_adver_link() contains duplicated code that
is found in mlx5e_ethtool_get_speed_arr().
To eliminate this redundancy, we update mlx5e_ethtool_get_speed_arr()
to select the appropriate table based on the ext argument passed by
the caller, rather than querying the supported mode locally.
This allows us to replace the current logic in ptys2ethtool_adver_link()
with a call to mlx5e_ethtool_get_speed_arr().
This adjustment aligns with the ptys2ethtool_supported_link() function
and prepares for an upcoming patch that reduces code duplication.
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250219114112.403808-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The implication of the previous help text was that without this option
enabled, representor devices couldn't be added to a bridge device, while
in fact that was possible, just that rules didn't get offloaded to hw.
This commit clarifies the help text.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250219114112.403808-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the vendor driver is claimed to measure 'tssi_alimk_time' of
'struct rtw89_tssi_info' in microseconds, adjust rtw8852b{t}-specific
'_tssi_alimentk()' to not mess the former with nanoseconds and print
both per-call and accumulated times. Compile tested only.
Fixes: 7f18a70d7b ("wifi: rtw89: 8852b: rfk: add TSSI")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250213095006.1308810-1-dmantipov@yandex.ru
kzalloc() uses page allocator when size is larger than
KMALLOC_MAX_CACHE_SIZE, so the intention of commit ab101c553b
("neighbour: use kvzalloc()/kvfree()") can be achieved by using kzalloc().
When using GFP_ATOMIC, kvzalloc() only tries the kmalloc path,
since the vmalloc path does not support the flag.
In this case, kvzalloc() is equivalent to kzalloc() in that neither try
the vmalloc path, so this replacement brings no functional change.
This is primarily a cleanup change, as the original code functions
correctly.
This patch replaces kvzalloc() introduced by commit 41b3caa7c0
("neighbour: Add hlist_node to struct neighbour"), which is called in
the same context and with the same gfp flag as the aforementioned commit
ab101c553b ("neighbour: use kvzalloc()/kvfree()").
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Link: https://patch.msgid.link/20250219102227.72488-1-enjuk@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Peter Seiderer says:
====================
Some pktgen fixes/improvments (part I)
While taking a look at '[PATCH net] pktgen: Avoid out-of-range in
get_imix_entries' ([1]) and '[PATCH net v2] pktgen: Avoid out-of-bounds
access in get_imix_entries' ([2], [3]) and doing some tests and code review
I detected that the /proc/net/pktgen/... parsing logic does not honour the
user given buffer bounds (resulting in out-of-bounds access).
This can be observed e.g. by the following simple test (sometimes the
old/'longer' previous value is re-read from the buffer):
$ echo add_device lo@0 > /proc/net/pktgen/kpktgend_0
$ echo "min_pkt_size 12345" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0
Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0
Result: OK: min_pkt_size=12345
$ echo -n "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0
Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0
Result: OK: min_pkt_size=12345
$ echo "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0
Params: count 1000 min_pkt_size: 123 max_pkt_size: 0
Result: OK: min_pkt_size=123
So fix the out-of-bounds access (and some minor findings) and add a simple
proc_net_pktgen selftest...
[1] https://lore.kernel.org/netdev/20241006221221.3744995-1-artem.chernyshev@red-soft.ru/
[2] https://lore.kernel.org/netdev/20250109083039.14004-1-pchelkin@ispras.ru/
[3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76201b5979768500bca362871db66d77cb4c225e
====================
Link: https://patch.msgid.link/20250219084527.20488-1-ps.report@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Honour the user given buffer size for the strn_len() calls (otherwise
strn_len() will access memory outside of the user given buffer).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250219084527.20488-8-ps.report@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable command writing without trailing '\n':
- the good case
$ echo "reset" > /proc/net/pktgen/pgctrl
- the bad case (before the patch)
$ echo -n "reset" > /proc/net/pktgen/pgctrl
-bash: echo: write error: Invalid argument
- with patch applied
$ echo -n "reset" > /proc/net/pktgen/pgctrl
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250219084527.20488-7-ps.report@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Given an invalid 'ratep' command e.g. 'ratep 0' the return value is '1',
leading to the following misleading output:
- the good case
$ echo "ratep 100" > /proc/net/pktgen/lo\@0
$ grep "Result:" /proc/net/pktgen/lo\@0
Result: OK: ratep=100
- the bad case (before the patch)
$ echo "ratep 0" > /proc/net/pktgen/lo\@0"
-bash: echo: write error: Invalid argument
$ grep "Result:" /proc/net/pktgen/lo\@0
Result: No such parameter "atep"
- with patch applied
$ echo "ratep 0" > /proc/net/pktgen/lo\@0
-bash: echo: write error: Invalid argument
$ grep "Result:" /proc/net/pktgen/lo\@0
Result: Idle
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250219084527.20488-6-ps.report@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Given an invalid 'rate' command e.g. 'rate 0' the return value is '1',
leading to the following misleading output:
- the good case
$ echo "rate 100" > /proc/net/pktgen/lo\@0
$ grep "Result:" /proc/net/pktgen/lo\@0
Result: OK: rate=100
- the bad case (before the patch)
$ echo "rate 0" > /proc/net/pktgen/lo\@0"
-bash: echo: write error: Invalid argument
$ grep "Result:" /proc/net/pktgen/lo\@0
Result: No such parameter "ate"
- with patch applied
$ echo "rate 0" > /proc/net/pktgen/lo\@0
-bash: echo: write error: Invalid argument
$ grep "Result:" /proc/net/pktgen/lo\@0
Result: Idle
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250219084527.20488-5-ps.report@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace ENOTSUPP with EOPNOTSUPP, fixes checkpatch hint
WARNING: ENOTSUPP is not a SUSV4 error code, prefer EOPNOTSUPP
and e.g.
$ echo "clone_skb 1" > /proc/net/pktgen/lo\@0
-bash: echo: write error: Unknown error 524
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250219084527.20488-2-ps.report@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Loongson's DWMAC device may take nearly two seconds to complete DMA reset,
however, the default waiting time for reset is 200 milliseconds.
Therefore, the following error message may appear:
[14.427169] dwmac-loongson-pci 0000:00:03.2: Failed to reset the dma
Fixes: 803fc61df2 ("net: stmmac: dwmac-loongson: Add Loongson Multi-channels GMAC support")
Cc: stable@vger.kernel.org
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Yanteng Si <si.yanteng@linux.dev>
Link: https://patch.msgid.link/20250219020701.15139-1-zhaoqunqin@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow a boolean property of "x-powers,no-thermistor" to specify devices
where the ts pin is not connected to anything. This works around an
issue found with some devices where the efuse is not programmed
correctly from the factory or when the register gets set erroneously.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Tested-by: Philippe Simons <simons.philippe@gmail.com>
Link: https://lore.kernel.org/r/20250204155835.161973-4-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add the vendor specific boolean property of x-powers,no-thermistor.
This property optionally describes hardware where no thermistor is
present on the battery and is specific to the AXP717. In rare
circumstances this value can be set incorrectly in the efuse of the
PMIC, and if it is not hard-coded the device will fail to charge.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250204155835.161973-2-macroalpha82@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-----BEGIN PGP SIGNATURE-----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=6RmG
-----END PGP SIGNATURE-----
Merge tag 'tags/ib-mfd-power-v6.15' into psy-next
Immutable branch between MFD and Power due for the v6.15 merge window
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This driver is used to control the power state of the devices attached to
the PCI slots. Currently, it controls the voltage rails of the PCI slots
defined in the devicetree node of the root port.
The voltage rails for PCI slots are documented in the DT-schema:
https://github.com/devicetree-org/dt-schema/blob/v2024.11/dtschema/schemas/pci/pci-bus-common.yaml#L153
Since this driver has to work with different kind of slots (PCIe
x1/x4/x8/x16, Mini PCIe, PCI, etc.), the driver is thus using the
of_regulator_bulk_get_all() API to obtain the voltage regulators defined
in the DT node, instead of hardcoding them.
As such, the DT node of the root port should define the relevant supply
properties corresponding to the voltage rails of the PCI slot.
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250116-pci-pwrctrl-slot-v3-5-827473c8fbf4@linaro.org
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
The "pciclass" is an existing prefix used to identify the PCI bridge
devices, but it is not a vendor prefix. So document it in the non-vendor
prefix list.
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250116-pci-pwrctrl-slot-v3-4-827473c8fbf4@linaro.org
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
When doing error injection to some memory DIMMs on certain Intel Emerald
Rapids servers, the i10nm_edac missed error reports for some memory DIMMs.
Certain BIOS configurations may hide some memory controllers, and the
i10nm_edac doesn't enumerate these hidden memory controllers. However, the
ADXL decodes memory errors using memory controller physical indices even
if there are hidden memory controllers. Therefore, the memory controller
physical indices reported by the ADXL may mismatch the logical indices
enumerated by the i10nm_edac, resulting in missed error reports for some
memory DIMMs.
Fix this issue by creating a mapping table from memory controller physical
indices (used by the ADXL) to logical indices (used by the i10nm_edac) and
using it to convert the physical indices to the logical indices during the
error handling process.
Fixes: c545f5e412 ("EDAC/i10nm: Skip the absent memory controllers")
Reported-by: Kevin Chang <kevin1.chang@intel.com>
Tested-by: Kevin Chang <kevin1.chang@intel.com>
Reported-by: Thomas Chen <Thomas.Chen@intel.com>
Tested-by: Thomas Chen <Thomas.Chen@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20250214002728.6287-1-qiuxu.zhuo@intel.com
gcc-14 produces a bogus warning in some configurations:
drivers/edac/ie31200_edac.c: In function 'ie31200_probe1.isra':
drivers/edac/ie31200_edac.c:412:26: error: 'dimm_info' is used uninitialized [-Werror=uninitialized]
412 | struct dimm_data dimm_info[IE31200_CHANNELS][IE31200_DIMMS_PER_CHANNEL];
| ^~~~~~~~~
drivers/edac/ie31200_edac.c:412:26: note: 'dimm_info' declared here
412 | struct dimm_data dimm_info[IE31200_CHANNELS][IE31200_DIMMS_PER_CHANNEL];
| ^~~~~~~~~
I don't see any way the unintialized access could really happen here,
but I can see why the compiler gets confused by the two loops.
Instead, rework the two nested loops to only read the addr_decode
registers and then keep only one instance of the dimm info structure.
[Tony: Qiuxu pointed out that the "populate DIMM info" comment was left
behind in the refactor and suggested moving it. I deleted the comment
as unnecessry in front os a call to populate_dimm_info(). That seems
pretty self-describing.]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/all/20250122065031.1321015-1-arnd@kernel.org
Fixes for v6.14-rc4
Display:
* More catalog fixes:
- to skip watchdog programming through top block if its not present
- fix the setting of WB mask to ensure the WB input control is programmed
correctly through ping-pong
- drop lm_pair for sm6150 as that chipset does not have any 3dmerge block
* Fix the mode validation logic for DP/eDP to account for widebus (2ppc)
to allow high clock resolutions
* Fix to disable dither during encoder disable as otherwise this was
causing kms_writeback failure due to resource sharing between
* WB and DSI paths as DSI uses dither but WB does not
* Fixes for virtual planes, namely to drop extraneous return and fix
uninitialized variables
* Fix to avoid spill-over of DSC encoder block bits when programming
the bits-per-component
* Fixes in the DSI PHY to protect against concurrent access of
PHY_CMN_CLK_CFG regs between clock and display drivers
Core/GPU:
* Fix non-blocking fence wait incorrectly rounding up to 1 jiffy timeout
* Only print GMU fw version once, instead of each time the GPU resumes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtt2AODBXdod8ULXcAygf_qYvwRDVeUVtODx=2jErp6cA@mail.gmail.com
- Fixes on DDI and TRANS programming (Imre)
- Make sure all planes in use by the joiner have their crtc included (Ville)
- Fix 128b/132b modeset issues (Imre)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAme3X+8ACgkQ+mJfZA7r
E8oEIwf/SBXdcra62NfaJqmT68CYBmp6UMocftVW1n0JiXUmhqTZ0N00SkEZz1jO
6fGpZGmwquvPM6iDWw4ePJdcKMfxyv60VYbHRmNWkHMrlLBRU5v2bXfuOhqoTwWz
+tl5AVdmrCJGcifxHoxwoMJOISQXPqa5E02dCCREBM0KuaNYVcIvamLNfYrVF6id
UDPp+x8IBJ9vlUfSkju74orB2HckevG03/i7XogmAVKGgqskX2KJ0etWBRxT9Xqi
WbOXS92EEIR58DNvUYj9My7ssbwnM1oVHJHx5r14eKLSSxoGU4JFUsDqbl3pRnr3
b4q1KZftaTUuabH2dUiY3qMUtP+q9A==
=6gjX
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-fixes-2025-02-20' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Use spin_lock_irqsave() in interruptible context on guc submission (Krzysztof)
- Fixes on DDI and TRANS programming (Imre)
- Make sure all planes in use by the joiner have their crtc included (Ville)
- Fix 128b/132b modeset issues (Imre)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z7dgcUG_hvityvHn@intel.com
- FC controller state check fixes (Daniel)
- PCI Endpoint fixes (Damien)
- TCP connection failure fixe (Caleb)
- TCP handling C2HTermReq PDU (Maurizio)
- RDMA queue state check (Ruozhu)
- Apple controller fixes (Hector)
- Target crash on disbaled namespace (Hannes)
-----BEGIN PGP SIGNATURE-----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=QHUq
-----END PGP SIGNATURE-----
Merge tag 'nvme-6.14-2025-02-20' of git://git.infradead.org/nvme into block-6.14
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.14
- FC controller state check fixes (Daniel)
- PCI Endpoint fixes (Damien)
- TCP connection failure fixe (Caleb)
- TCP handling C2HTermReq PDU (Maurizio)
- RDMA queue state check (Ruozhu)
- Apple controller fixes (Hector)
- Target crash on disbaled namespace (Hannes)"
* tag 'nvme-6.14-2025-02-20' of git://git.infradead.org/nvme:
nvme: only allow entering LIVE from CONNECTING state
nvme-fc: rely on state transitions to handle connectivity loss
apple-nvme: Support coprocessors left idle
apple-nvme: Release power domains when probe fails
nvmet: Use enum definitions instead of hardcoded values
nvme: Cleanup the definition of the controller config register fields
nvme/ioctl: add missing space in err message
nvme-tcp: fix connect failure on receiving partial ICResp PDU
nvme: tcp: Fix compilation warning with W=1
nvmet: pci-epf: Avoid RCU stalls under heavy workload
nvmet: pci-epf: Do not uselessly write the CSTS register
nvmet: pci-epf: Correctly initialize CSTS when enabling the controller
nvmet-rdma: recheck queue state is LIVE in state lock in recv done
nvmet: Fix crash when a namespace is disabled
nvme-tcp: add basic support for the C2HTermReq PDU
nvme-pci: quirk Acer FA100 for non-uniqueue identifiers
- Fix a soft-lockup in BPF arena_map_free on 64k page size
kernels (Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding
kfree_skb to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's
freeze_mutex (Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when
eth_skb_pkt_type is accessing skb data not containing an
Ethernet header (Shigeru Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch
(Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2)
in user space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZ7evlRUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIPwHgD/dTvM00Ck4Q73fPivyT7tcqxeXJlD
D6ggzWl/SG9LAbwA/2/cSgAM9Jm1g7ddvn/S9QaDYOs5GmFl6urq6krs+tYD
=FCs9
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull BPF fixes from Daniel Borkmann:
- Fix a soft-lockup in BPF arena_map_free on 64k page size kernels
(Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding kfree_skb
to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's freeze_mutex
(Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when eth_skb_pkt_type is
accessing skb data not containing an Ethernet header (Shigeru
Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch (Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2) in user
space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests: bpf: test batch lookup on array of maps with holes
bpf: skip non exist keys in generic_map_lookup_batch
bpf: Handle allocation failure in acquire_lock_state
bpf: verifier: Disambiguate get_constant_map_key() errors
bpf: selftests: Test constant key extraction on irrelevant maps
bpf: verifier: Do not extract constant map keys for irrelevant maps
bpf: Fix softlockup in arena_map_free on 64k page kernel
net: Add rx_skb of kfree_skb to raw_tp_null_args[].
bpf: Fix deadlock when freeing cgroup storage
selftests/bpf: Add strparser test for bpf
selftests/bpf: Fix invalid flag of recv()
bpf: Disable non stream socket for strparser
bpf: Fix wrong copied_seq calculation
strparser: Add read_sock callback
bpf: avoid holding freeze_mutex during mmap operation
bpf: unify VM_WRITE vs VM_MAYWRITE use in BPF map mmaping logic
selftests/bpf: Adjust data size to have ETH_HLEN
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
bpf: Remove unnecessary BTF lookups in bpf_sk_storage_tracing_allowed
Fix an issue with the sparse static analysis tool where an
"undefined 'other'" error occurs due to `__releases(&unix_sk(other)->lock)`
being placed before 'other' is in scope.
Remove the `__releases()` annotation from the `unix_wait_for_peer()`
function to eliminate the sparse error. The annotation references `other`
before it is declared, leading to a false positive error during static
analysis.
Since AF_UNIX does not use sparse annotations, this annotation is
unnecessary and does not impact functionality.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Purva Yeshi <purvayeshi550@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250218141045.38947-1-purvayeshi550@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
