According to the latest event list, update the event constraint tables
for Lion Cove core.
The general rule (the event codes < 0x90 are restricted to counters
0-3.) has been removed. There is no restriction for most of the
performance monitoring events.
Fixes: a932aa0e86 ("perf/x86: Add Lunar Lake and Arrow Lake support")
Reported-by: Amiri Khalil <amiri.khalil@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250219141005.2446823-1-kan.liang@linux.intel.com
For existing epoll event loops that can't fully convert to io_uring,
the used approach is usually to add the io_uring fd to the epoll
instance and use epoll_wait() to wait on both "legacy" and io_uring
events. While this work, it isn't optimal as:
1) epoll_wait() is pretty limited in what it can do. It does not support
partial reaping of events, or waiting on a batch of events.
2) When an io_uring ring is added to an epoll instance, it activates the
io_uring "I'm being polled" logic which slows things down.
Rather than use this approach, with EPOLL_WAIT support added to io_uring,
event loops can use the normal io_uring wait logic for everything, as
long as an epoll wait request has been armed with io_uring.
Note that IORING_OP_EPOLL_WAIT does NOT take a timeout value, as this
is an async request. Waiting on io_uring events in general has various
timeout parameters, and those are the ones that should be used when
waiting on any kind of request. If events are immediately available for
reaping, then This opcode will return those immediately. If none are
available, then it will post an async completion when they become
available.
cqe->res will contain either an error code (< 0 value) for a malformed
request, invalid epoll instance, etc. It will return a positive result
indicating how many events were reaped.
IORING_OP_EPOLL_WAIT requests may be canceled using the normal io_uring
cancelation infrastructure.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just have the Makefile add the object if epoll is enabled, then it's
not necessary to guard the entire epoll.c file inside an CONFIG_EPOLL
ifdef.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge epoll changes from the VFS tree, which the io_uring changes depend
on.
* 'vfs-6.15.eventpoll' of https://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
eventpoll: add epoll_sendevents() helper
eventpoll: abstract out ep_try_send_events() helper
eventpoll: abstract out parameter sanity checking
The VF driver controls an endpoint attached to the PCI HyperV
controller. An invalidation sent by the PF driver in the host
would be delivered *to* the endpoint driver by the controller
driver.
Thus, correct the wording within the comment.
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20250207190716.89995-1-eahariha@linux.microsoft.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Pull MD fix from Yu:
"This patch, by Bart Van Assche, fixes queue limits error handling for
raid0, raid1 and raid10."
* tag 'md-6.14-20250218' of https://git.kernel.org/pub/scm/linux/kernel/git/mdraid/linux:
md/raid*: Fix the set_queue_limits implementations
Fuse allows the value of a symlink to change and this property is exploited
by some filesystems (e.g. CVMFS).
It has been observed, that sometimes after changing the symlink contents,
the value is truncated to the old size.
This is caused by fuse_getattr() racing with fuse_reverse_inval_inode().
fuse_reverse_inval_inode() updates the fuse_inode's attr_version, which
results in fuse_change_attributes() exiting before updating the cached
attributes
This is okay, as the cached attributes remain invalid and the next call to
fuse_change_attributes() will likely update the inode with the correct
values.
The reason this causes problems is that cached symlinks will be
returned through page_get_link(), which truncates the symlink to
inode->i_size. This is correct for filesystems that don't mutate
symlinks, but in this case it causes bad behavior.
The solution is to just remove this truncation. This can cause a
regression in a filesystem that relies on supplying a symlink larger than
the file size, but this is unlikely. If that happens we'd need to make
this behavior conditional.
Reported-by: Laura Promberger <laura.promberger@cern.ch>
Tested-by: Sam Lewis <samclewis@google.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250220100258.793363-1-mszeredi@redhat.com
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/4a028a23126b3350a5e243dcb49e1ef1b2a4b740.1738746904.git.namcao@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/c21664d013015584aebbb6bb8cedd748182cb551.1738746904.git.namcao@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/ad27070bc67c13f8a9acbd5cbf4cbae72797e3e1.1738746904.git.namcao@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/78e8c0d1b38998eab983fad265751ed13c2b9009.1738746904.git.namcao@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/991926d130cc272df30d226760d5d74187991669.1738746904.git.namcao@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The field 'function' of struct hrtimer should not be changed directly, as
the write is lockless and a concurrent timer expiry might end up using the
wrong function pointer.
Switch to use hrtimer_update_function() which also performs runtime checks
that it is safe to modify the callback.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/af7823518fb060c6c97105a2513cfc61adbdf38f.1738746927.git.namcao@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fsl-spi.txt contains the bindings for the fsl,spi and fsl,espi
contollers. Convert them to YAML.
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://patch.msgid.link/20250220-ppcyaml-spi-v3-1-e340613c7875@posteo.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Describe that it tests the miscdevice API and include the usual disclaimer
about KUnit not being fit for production kernels.
While at it, also fix KUnit capitalization.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://lore.kernel.org/r/20250123123249.4081674-2-cascardo@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Support blinking using the PCA955x chip. Use PWM0 for blinking
instead of LED_HALF brightness. Since there is only one frequency
and brightness register for any blinking LED, track the blink state
of each LED and only support one HW blinking frequency. If another
frequency is requested, fallback to software blinking. In addition,
blinked LEDs can only use full brightness in order to maintain 50%
duty cycle, which is required for the specified blink rate.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20250212143038.1416501-5-eajames@linux.ibm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Previously, the probe function might do up to 32 reads and writes
to the same 4 registers to program the LED selection. Reduce this to
a maximum of 5 operations by accumulating the changes to the LED
selection and comparing with the previous value to write the
selection if different.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20250212143038.1416501-4-eajames@linux.ibm.com
Signed-off-by: Lee Jones <lee@kernel.org>
As a minor clean up item, pass the driver data pointer instead of the
I2C client to the reader and writer helper functions. Now the PCA
driver data doesn't have to be looked up again in the I2C client data
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20250212143038.1416501-3-eajames@linux.ibm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add helper functions to clean up the code, and rename a few
oddly named functions and variables.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20250212143038.1416501-2-eajames@linux.ibm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Like other eeprom drivers, check if the device is really there and
functional before probing.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20250218220959.721698-1-eajames@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
binder_internal.h is included only in the following two C files:
$ git grep binder_internal.h
drivers/android/binder.c:#include "binder_internal.h"
drivers/android/binderfs.c:#include "binder_internal.h"
Neither of these files use the EXPORT_SYMBOL macro, so including
<linux/export.h> is unnecessary.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20250217112756.1011333-1-masahiroy@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When compiling a kernel with GCC using `make W=1` with CONFIG_WERROR=y
(which is default nowadays), the build fails:
drivers/char/virtio_console.c:1427:9: note: ‘snprintf’ output between 9 and 27 bytes into a destination of size 16
Indeed, GCC can't see the limits of the variables that are in use.
Fix this by using dev_name() of the newly created device that is
luckily the same as the string used for the DebugFS node name.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Amit Shah <amit@kernel.org>
Link: https://lore.kernel.org/r/20250210095946.4122771-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove hard-coded strings by using the str_yes_no() helper function.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Amit Shah <amit@kernel.org>
Link: https://lore.kernel.org/r/20250212114841.74650-2-thorsten.blum@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following functions have been in the mei code for
a long time but have never been used.
mei_txe_setup_satt2() was added in 2014 by
commit 32e2b59fca ("mei: txe: add hw-txe.c")
mei_me_cl_rm_by_uuid_id() was added in 2015 by
commit 79563db9dd ("mei: add reference counting for me clients")
mei_cldev_uuid() was added in 2015 by
commit baeacd0376 ("mei: bus: export uuid and protocol version to mei_cl
bus drivers")
mei_cldev_recv_nonblock() was added in 2016 by
commit 076802d006 ("mei: bus: enable non-blocking RX")
it is the only user of mei_cldev_recv_nonblock_vtag().
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250130012654.255119-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `startup_64` symbol and many other assembler symbols are not tagged.
Add a generic rule to tag assembler symbols defined with macros like
SYM_*START*(symbol).
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Link: https://lore.kernel.org/r/20250131155439.2025038-1-costa.shul@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add error handling for the gb_greybus_init(bg) function call
during the firmware reflash process to maintain consistency
in error handling throughout the codebase. If initialization
fails, log an error and return FW_UPLOAD_ERR_RW_ERROR.
Fixes: 0cf7befa3e ("greybus: gb-beagleplay: Add firmware upload API")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Ayush Singh <ayush@beagleboard.org>
Link: https://lore.kernel.org/r/20250120140547.1460-1-vulab@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The simple-pm-bus driver only enables runtime PM for some buses
('simple-pm-bus') yet has started calling pm_runtime_force_suspend() and
pm_runtime_force_resume() during system suspend unconditionally.
This currently works, but that is not obvious and depends on
implementation details which may change at some point.
Add dedicated system sleep ops and only call pm_runtime_force_suspend()
and pm_runtime_force_resume() for buses that use runtime PM to avoid any
future surprises.
Fixes: c45839309c ("drivers: bus: simple-pm-bus: Use clocks")
Cc: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250214102130.3000-1-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When creating sysfs files fail, the allocated minor must be freed such that
it can be later reused. That is specially harmful for static minor numbers,
since those would always fail to register later on.
Fixes: 6d04d2b554 ("misc: misc_minor_alloc to use ida for all dynamic/misc dynamic minors")
Cc: stable <stable@kernel.org>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://lore.kernel.org/r/20250123123249.4081674-5-cascardo@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The dev_id value in the GPIO lookup table must match to
the device instance name, which in this case is combined
of name and platform device ID, i.e. "spi_gpio.1". But
the table assumed that there was no platform device ID
defined, which is wrong. Fix the dev_id value accordingly.
Fixes: 9b00bc7b90 ("spi: spi-gpio: Rewrite to use GPIO descriptors")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250206220311.1554075-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the "pmcmd_ioctl" function, three memory objects allocated by
kmalloc are initialized by "hcall_get_cpu_state", which are then
copied to user space. The initializer is indeed implemented in
"acrn_hypercall2" (arch/x86/include/asm/acrn.h). There is a risk of
information leakage due to uninitialized bytes.
Fixes: 3d679d5aec ("virt: acrn: Introduce interfaces to query C-states and P-states allowed by hypervisor")
Signed-off-by: Haoyu Li <lihaoyu499@gmail.com>
Cc: stable <stable@kernel.org>
Acked-by: Fei Li <fei1.li@intel.com>
Link: https://lore.kernel.org/r/20250130115811.92424-1-lihaoyu499@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devices created through binderfs are added to the global binder_devices
list but are not removed before being destroyed. This leads to dangling
pointers in the list and subsequent use-after-free errors:
==================================================================
BUG: KASAN: slab-use-after-free in binder_add_device+0x5c/0x9c
Write of size 8 at addr ffff0000c258d708 by task mount/653
CPU: 7 UID: 0 PID: 653 Comm: mount Not tainted 6.13.0-09030-g6d61a53dd6f5 #1
Hardware name: linux,dummy-virt (DT)
Call trace:
binder_add_device+0x5c/0x9c
binderfs_binder_device_create+0x690/0x84c
[...]
__arm64_sys_mount+0x324/0x3bc
Allocated by task 632:
binderfs_binder_device_create+0x168/0x84c
binder_ctl_ioctl+0xfc/0x184
[...]
__arm64_sys_ioctl+0x110/0x150
Freed by task 649:
kfree+0xe0/0x338
binderfs_evict_inode+0x138/0x1dc
[...]
==================================================================
Remove devices from binder_devices before destroying them.
Cc: Li Li <dualli@google.com>
Reported-by: syzbot+7015dcf45953112c8b45@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=7015dcf45953112c8b45
Fixes: 12d909cac1 ("binderfs: add new binder devices to binder_devices")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Tested-by: syzbot+7015dcf45953112c8b45@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20250130215823.1518990-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of interrupt delay for any reason, slim_do_transfer()
returns timeout error but the transaction ID (TID) is not freed.
This results into invalid memory access inside
qcom_slim_ngd_rx_msgq_cb() due to invalid TID.
Fix the issue by freeing the TID in slim_do_transfer() before
returning timeout error to avoid invalid memory access.
Call trace:
__memcpy_fromio+0x20/0x190
qcom_slim_ngd_rx_msgq_cb+0x130/0x290 [slim_qcom_ngd_ctrl]
vchan_complete+0x2a0/0x4a0
tasklet_action_common+0x274/0x700
tasklet_action+0x28/0x3c
_stext+0x188/0x620
run_ksoftirqd+0x34/0x74
smpboot_thread_fn+0x1d8/0x464
kthread+0x178/0x238
ret_from_fork+0x10/0x20
Code: aa0003e8 91000429 f100044a 3940002b (3800150b)
---[ end trace 0fe00bec2b975c99 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt.
Fixes: afbdcc7c38 ("slimbus: Add messaging APIs to slimbus framework")
Cc: stable <stable@kernel.org>
Signed-off-by: Visweswara Tanuku <quic_vtanuku@quicinc.com>
Link: https://lore.kernel.org/r/20250124125740.16897-1-quic_vtanuku@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Devices, which have a non-atomic MSI update, might see an intermediate
state when changing the target IMSIC vector from one CPU to another.
To avoid losing interrupts due to this intermediate state, do the following
just like x86 APIC:
1) First write a temporary IMSIC vector to the device which has the same
MSI address as the old IMSIC vector and MSI data pointing to the new
IMSIC vector.
2) Next write the new IMSIC vector to the device.
Based on the above, the __imsic_local_sync() must check pending status of
both old MSI data and new MSI data on the old CPU. In addition, the
movement of IMSIC vector for non-atomic device MSI update must be done in
interrupt context using IRQCHIP_MOVE_DEFERRED.
Implememnt the logic and enforce the chip flag for PCI/MSI[X].
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-11-apatel@ventanamicro.com
The vboxguest driver depends on port I/O for debug output:
include/asm-generic/io.h:626:15: error: call to '_outl' declared with attribute error: outl() requires CONFIG_HAS_IOPORT
626 | #define _outl _outl
include/asm-generic/io.h:663:14: note: in expansion of macro '_outl'
663 | #define outl _outl
| ^~~~~
drivers/virt/vboxguest/vboxguest_utils.c:102:9: note: in expansion of macro 'outl'
102 | outl(phys_req, gdev->io_port + VMMDEV_PORT_OFF_REQUEST);
| ^~~~
Most arm64 platforms don't actually support port I/O, though it is
currently enabled unconditionally. Refine the vbox dependency to allow
turning HAS_IOPORT off in the future when building for platforms without
port I/O and allow compile-testing on all architectures.
Fixes: 5cf8f938bf ("vbox: Enable VBOXGUEST and VBOXSF_FS on ARM64")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250122065445.1469218-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently, imsic_handle_irq() uses generic_handle_domain_irq() to handle
the interrupt, which internally has an extra step of resolving hwirq using
domain.
Avoid the translation step by replacing the hardware interrupt number with
the Linux interrupt number in the IMSIC vector data and directly call
generic_handle_irq().
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-10-apatel@ventanamicro.com
Implement irq_force_complete_move() for IMSIC driver so that in-flight
vector movements on a CPU can be cleaned-up when the CPU goes down.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-9-apatel@ventanamicro.com
Currently, there is only one "move" pointer in struct imsic_vector so
during vector movement the old vector points to the new vector and new
vector points to itself.
To support forced cleanup of the old vector, add separate "move_next" and
"move_prev" pointers to struct imsic_vector, where during vector movement
the "move_next" pointer of the old vector points to the new vector and the
"move_prev" pointer of the new vector points to the old vector.
Both "move_next" and "move_prev" pointers are cleared separately by
__imsic_local_sync() with a restriction that "move_prev" on the new
CPU is cleared only after the old CPU has cleared "move_next".
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-8-apatel@ventanamicro.com
Enable CONFIG_GENERIC_PENDING_IRQ for RISC-V so that RISC-V interrupt chips
can support delayed interrupt mirgration in interrupt context.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-7-apatel@ventanamicro.com
Interrupt controller drivers which enable CONFIG_GENERIC_PENDING_IRQ
require to know whether an interrupt can be moved in process context or not
to decide whether they need to invoke the work around for non-atomic MSI
updates or not.
This information can be retrieved via irq_can_move_pcntxt(). That helper
requires access to the top-most interrupt domain data, but the driver which
requires this is usually further down in the hierarchy.
Introduce irq_can_move_in_process_context() which retrieves that
information from the top-most interrupt domain data.
[ tglx: Massaged change log ]
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-6-apatel@ventanamicro.com
CONFIG_GENERIC_PENDING_IRQ requires an architecture specific implementation
of irq_force_complete_move() for CPU hotplug. At the moment, only x86
implements this unconditionally, but for RISC-V irq_force_complete_move()
is only needed when the RISC-V IMSIC driver is in use and not needed
otherwise.
To allow runtime configuration of this mechanism, introduce a common
irq_force_complete_move() implementation in the interrupt core code, which
only invokes the completion function, when a interrupt chip in the
hierarchy implements it.
Switch X86 over to the new mechanism. No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-5-apatel@ventanamicro.com
Simplify the leaf MSI domain handling in the RISC-V IMSIC driver by
using msi_lib_init_dev_msi_info() and msi_lib_irq_domain_select()
provided by the common MSI library.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-4-apatel@ventanamicro.com
msi_lib_init_dev_msi_info() sets the default irq_eoi()/irq_ack() callbacks
unconditionally. This is correct for all existing users, but prevents the
IMSIC driver to be moved to the MSI library implementation.
Introduce chip_flags in struct msi_parent_ops, which instruct the library
to selectively set the callbacks depending on the flags, and update all
current users to set them.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250217085657.789309-3-apatel@ventanamicro.com
Fixed a possible UAF problem in driver_override_show() in drivers/cdx/cdx.c
This function driver_override_show() is part of DEVICE_ATTR_RW, which
includes both driver_override_show() and driver_override_store().
These functions can be executed concurrently in sysfs.
The driver_override_store() function uses driver_set_override() to
update the driver_override value, and driver_set_override() internally
locks the device (device_lock(dev)). If driver_override_show() reads
cdx_dev->driver_override without locking, it could potentially access
a freed pointer if driver_override_store() frees the string
concurrently. This could lead to printing a kernel address, which is a
security risk since DEVICE_ATTR can be read by all users.
Additionally, a similar pattern is used in drivers/amba/bus.c, as well
as many other bus drivers, where device_lock() is taken in the show
function, and it has been working without issues.
This potential bug was detected by our experimental static analysis
tool, which analyzes locking APIs and paired functions to identify
data races and atomicity violations.
Fixes: 1f86a00c11 ("bus/fsl-mc: add support for 'driver_override' in the mc-bus")
Cc: stable <stable@kernel.org>
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Link: https://lore.kernel.org/r/20250118070833.27201-1-chenqiuji666@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the clk_prepare_enable() call for the SPDIF clock fails, just
disable and unprepare the clock in the error check branch and
return immediately instead of jumping to the end with a goto,
slightly reducing code size.
This commit brings no functional changes.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20250217154836.108895-32-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
This driver uses the enable-gpios property and it is confusing that the
error message refers to reset-gpios. Use the correct name when the
enable GPIO is not found.
Fixes: e2450d32e5 ("drm/panel: ili9882t: Break out as separate driver")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217120428.3779197-1-jkeeping@inmusicbrands.com
