This was previously attempted as xe specific reset uevent but dropped
in commit 77a0d4d1ce ("drm/xe/uapi: Remove reset uevent for now")
as part of refactoring.
Now that we have device wedged event provided by DRM core, make use
of it and support both driver rebind and bus-reset based recovery.
With this in place userspace will be notified of wedged device, on
the basis of which, userspace may take respective action to recover
the device.
$ udevadm monitor --property --kernel
monitor will print the received events for:
KERNEL - the kernel uevent
KERNEL[265.802982] change /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:01.0/0000:03:00.0/drm/card0 (drm)
ACTION=change
DEVPATH=/devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:01.0/0000:03:00.0/drm/card0
SUBSYSTEM=drm
WEDGED=rebind,bus-reset
DEVNAME=/dev/dri/card0
DEVTYPE=drm_minor
SEQNUM=5208
MAJOR=226
MINOR=0
v2: Change authorship to Himal (Aravind)
Add uevent for all device wedged cases (Aravind)
v3: Generic implementation in DRM subsystem (Lucas)
v4: Change authorship to Raag (Aravind)
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204070528.1919158-4-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Introduce device wedged event, which notifies userspace of 'wedged'
(hanged/unusable) state of the DRM device through a uevent. This is
useful especially in cases where the device is no longer operating as
expected and has become unrecoverable from driver context. Purpose of
this implementation is to provide drivers a generic way to recover the
device with the help of userspace intervention without taking any drastic
measures (like resetting or re-enumerating the full bus, on which the
underlying physical device is sitting) in the driver.
A 'wedged' device is basically a device that is declared dead by the
driver after exhausting all possible attempts to recover it from driver
context. The uevent is the notification that is sent to userspace along
with a hint about what could possibly be attempted to recover the device
from userspace and bring it back to usable state. Different drivers may
have different ideas of a 'wedged' device depending on hardware
implementation of the underlying physical device, and hence the vendor
agnostic nature of the event. It is up to the drivers to decide when they
see the need for device recovery and how they want to recover from the
available methods.
Driver prerequisites
--------------------
The driver, before opting for recovery, needs to make sure that the
'wedged' device doesn't harm the system as a whole by taking care of the
prerequisites. Necessary actions must include disabling DMA to system
memory as well as any communication channels with other devices. Further,
the driver must ensure that all dma_fences are signalled and any device
state that the core kernel might depend on is cleaned up. All existing
mmaps should be invalidated and page faults should be redirected to a
dummy page. Once the event is sent, the device must be kept in 'wedged'
state until the recovery is performed. New accesses to the device
(IOCTLs) should be rejected, preferably with an error code that resembles
the type of failure the device has encountered. This will signify the
reason for wedging, which can be reported to the application if needed.
Recovery
--------
Current implementation defines three recovery methods, out of which,
drivers can use any one, multiple or none. Method(s) of choice will be
sent in the uevent environment as ``WEDGED=<method1>[,..,<methodN>]`` in
order of less to more side-effects. If driver is unsure about recovery
or method is unknown (like soft/hard system reboot, firmware flashing,
physical device replacement or any other procedure which can't be
attempted on the fly), ``WEDGED=unknown`` will be sent instead.
Userspace consumers can parse this event and attempt recovery as per the
following expectations.
=============== ========================================
Recovery method Consumer expectations
=============== ========================================
none optional telemetry collection
rebind unbind + bind driver
bus-reset unbind + bus reset/re-enumeration + bind
unknown consumer policy
=============== ========================================
The only exception to this is ``WEDGED=none``, which signifies that the
device was temporarily 'wedged' at some point but was recovered from driver
context using device specific methods like reset. No explicit recovery is
expected from the consumer in this case, but it can still take additional
steps like gathering telemetry information (devcoredump, syslog). This is
useful because the first hang is usually the most critical one which can
result in consequential hangs or complete wedging.
Consumer prerequisites
----------------------
It is the responsibility of the consumer to make sure that the device or
its resources are not in use by any process before attempting recovery.
With IOCTLs erroring out, all device memory should be unmapped and file
descriptors should be closed to prevent leaks or undefined behaviour. The
idea here is to clear the device of all user context beforehand and set
the stage for a clean recovery.
Example
-------
Udev rule::
SUBSYSTEM=="drm", ENV{WEDGED}=="rebind", DEVPATH=="*/drm/card[0-9]",
RUN+="/path/to/rebind.sh $env{DEVPATH}"
Recovery script::
#!/bin/sh
DEVPATH=$(readlink -f /sys/$1/device)
DEVICE=$(basename $DEVPATH)
DRIVER=$(readlink -f $DEVPATH/driver)
echo -n $DEVICE > $DRIVER/unbind
echo -n $DEVICE > $DRIVER/bind
Customization
-------------
Although basic recovery is possible with a simple script, consumers can
define custom policies around recovery. For example, if the driver supports
multiple recovery methods, consumers can opt for the suitable one depending
on scenarios like repeat offences or vendor specific failures. Consumers
can also choose to have the device available for debugging or telemetry
collection and base their recovery decision on the findings. This is useful
especially when the driver is unsure about recovery or method is unknown.
v4: s/drm_dev_wedged/drm_dev_wedged_event
Use drm_info() (Jani)
Kernel doc adjustment (Aravind)
v5: Send recovery method with uevent (Lina)
v6: Access wedge_recovery_opts[] using helper function (Jani)
Use snprintf() (Jani)
v7: Convert recovery helpers into regular functions (Andy, Jani)
Aesthetic adjustments (Andy)
Handle invalid recovery method
v8: Allow sending multiple methods with uevent (Lucas, Michal)
static_assert() globally (Andy)
v9: Provide 'none' method for device reset (Christian)
Provide recovery opts using switch cases
v11: Log device reset (André)
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250204070528.1919158-2-raag.jadav@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
syscon_regmap_lookup_by_phandle() combined with getting the syscon
argument. Except simpler code this annotates within one line that given
phandle has arguments, so grepping for code would be easier.
There is also no real benefit in printing errors on missing syscon
argument, because this is done just too late: runtime check on
static/build-time data. Dtschema and Devicetree bindings offer the
static/build-time check for this already.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20250111185407.183855-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
To make USB runtime suspend work when a UDC has been bound, the phy
needs to inform the USBDRD controller (DWC3) that Vbus and bvalid are
gone, so that it can in turn raise the respective gadget interrupt with
event == DWC3_DEVICE_EVENT_DISCONNECT, which will cause the USB stack
to clean up, allowing DWC3 to enter runtime suspend.
On e850 and gs101 this isn't working, as the respective signals are not
directly connected, and instead this driver uses override bits in the
PHY IP to set those signals. It currently forcefully sets them to 'on',
so the above mentioned interrupt will not be raised, preventing runtime
suspend.
To detect that state, update this driver to act on the TCPC's
orientation signal - when orientation == NONE, Vbus is gone and we can
clear the respective bits. Similarly, for other orientation values we
re-enable them.
This makes runtime suspend work on platforms with a TCPC (like Pixel6),
while keeping compatibility with platforms without (e850-96).
With runtime suspend working, USB-C cable orientation detection now
also fully works on such platforms, and the link comes up as Superspeed
as expected irrespective of the cable orientation and whether UDC /
gadget are configured and active.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20241206-gs101-phy-lanes-orientation-phy-v4-7-f5961268b149@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
gs101's SS phy needs to be configured differently based on the
connector orientation, as the SS link can only be established if the
mux is configured correctly.
The code to handle programming of the mux is in place already, this commit
now adds the missing pieces to subscribe to the Type-C orientation
switch event.
Note that for this all to work we rely on the USB controller
re-initialising us. It should invoke our .exit() upon cable unplug, and
during cable plug we'll receive the orientation event after which we
expect our .init() to be called.
Above reinitialisation happens if the DWC3 controller can enter runtime
suspend automatically. For the DWC3 driver, this is an opt-in:
echo auto > /sys/devices/.../11110000.usb/power/control
Once done, things work as long as the UDC is not bound as otherwise it
stays busy because it doesn't cancel / stop outstanding TRBs. For now
we have to manually unbind the UDC in that case:
echo "" > sys/kernel/config/usb_gadget/.../UDC
Note that if the orientation-switch property is missing from the DT,
the code will behave as before this commit (meaning for gs101 it will
work in SS mode in one orientation only). Other platforms are not
affected either way.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20241206-gs101-phy-lanes-orientation-phy-v4-6-f5961268b149@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
USB SS lanes need to be configured based on the connector orientation -
at most two lanes will be in use for USB (and the remaining two for
alternate modes like DP).
For the USB link to come up in SS, the lane configuration registers
have to be programmed accordingly.
While we still need a way to be notified of the actual connector
orientation and then reprogram the registers accordingly (at the moment
the configuration happens just once during phy_init() and never again),
we can prepare the code doing the configuration to take the orientation
into account.
Do so.
Note: the mutex is needed to synchronize this with the upcoming
connector orientation callback.
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20241206-gs101-phy-lanes-orientation-phy-v4-5-f5961268b149@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This code's intention is to configure lane0 and lane2 tunings, but for
lane2 there is a typo and it ends up tuning something else.
Fix the typo, as it doesn't appear to make sense to apply different
tunings for lane0 vs lane2.
The same typo appears to exist in the bootloader, hence we restore the
original value in the typo'd registers as well. This can be removed
once / if the bootloader is updated.
Note that this is incorrect in the downstream driver as well - the
values had been copied from there.
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20241206-gs101-phy-lanes-orientation-phy-v4-4-f5961268b149@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
orientation-switch is the standard declaration to inform the Type-C mux
layer that a remote-endpoint is capable of processing orientation
change messages.
The USB PHY on gs101 needs to be configured based on the orientation of
the connector. For that the DTS needs a link between the phy's port and
a TCPCi, and we'll need to inform the phy driver that it should handle
the orientation (register a handler).
Update the schema to enforce that by requiring the orientation-switch
and port properties on gs101 (only). We disallow orientation-switch on
all other supported platforms, since other versions of this phy (or its
system integration) don't currently support or even need it.
Even though this new required gs101 property is an ABI break, the
intention for the driver is to behave as before if it's missing
(meaning for gs101 it will work in SS mode in one orientation only).
Other platforms are not affected.
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20241206-gs101-phy-lanes-orientation-phy-v4-2-f5961268b149@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Now when we use scx_bpf_task_cgroup() in ops.tick() to get the cgroup of
the current task, the following error will occur:
scx_foo[3795244] triggered exit kind 1024:
runtime error (called on a task not being operated on)
The reason is that we are using SCX_CALL_OP() instead of SCX_CALL_OP_TASK()
when calling ops.tick(), which triggers the error during the subsequent
scx_kf_allowed_on_arg_tasks() check.
SCX_CALL_OP_TASK() was first introduced in commit 36454023f5 ("sched_ext:
Track tasks that are subjects of the in-flight SCX operation") to ensure
task's rq lock is held when accessing task's sched_group. Since ops.tick()
is marked as SCX_KF_TERMINAL and task_tick_scx() is protected by the rq
lock, we can use SCX_CALL_OP_TASK() to avoid the above issue. Similarly,
the same changes should be made for ops.disable() and ops.exit_task(), as
they are also protected by task_rq_lock() and it's safe to access the
task's task_group.
Fixes: 36454023f5 ("sched_ext: Track tasks that are subjects of the in-flight SCX operation")
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This reverts commit 011b033590.
Sabrina reports that the revert may trigger warnings due to intervening
changes, especially the ability to rise MAX_SKB_FRAGS. Let's drop it
and revisit once that part is also ironed out.
Fixes: 011b033590 ("Revert "net: skb: introduce and use a single page frag cache"")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/6bf54579233038bc0e76056c5ea459872ce362ab.1739375933.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ABI documentation looks a little bit better if it starts
with the contents of the README is placed at the beginning.
Move it to the beginning of the ABI chapter. While here, improve
the README text and change the title that will be shown at the
html/pdf output to be coherent with both ABI file contents and
with the generated documentation output.
Suggested-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20250211055809.1898623-1-mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Now BPF only supports bpf_list_push_{front,back}_impl kfunc, not bpf_list_
push_{front,back}.
This patch fix this issue. Without this patch, if we use bpf_list kfunc
in scx, the BPF verifier would complain:
libbpf: extern (func ksym) 'bpf_list_push_back': not found in kernel or
module BTFs
libbpf: failed to load object 'scx_foo'
libbpf: failed to load BPF skeleton 'scx_foo': -EINVAL
With this patch, the bpf list kfunc will work as expected.
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Fixes: 2a52ca7c98 ("sched_ext: Add scx_simple and scx_example_qmap example schedulers")
Signed-off-by: Tejun Heo <tj@kernel.org>
In jadard_prepare() a reset pulse is generated with the following
statements (delays ommited for clarity):
gpiod_set_value(jadard->reset, 1); --> Deassert reset
gpiod_set_value(jadard->reset, 0); --> Assert reset for 10ms
gpiod_set_value(jadard->reset, 1); --> Deassert reset
However, specifying second argument of "0" to gpiod_set_value() means to
deassert the GPIO, and "1" means to assert it. If the reset signal is
defined as GPIO_ACTIVE_LOW in the DTS, the above statements will
incorrectly generate the reset pulse (inverted) and leave it asserted
(LOW) at the end of jadard_prepare().
Fix reset behavior by inverting gpiod_set_value() second argument
in jadard_prepare(). Also modify second argument to devm_gpiod_get()
in jadard_dsi_probe() to assert the reset when probing.
Do not modify it in jadard_unprepare() as it is already properly
asserted with "1", which seems to be the intended behavior.
Fixes: 6b818c533d ("drm: panel: Add Jadard JD9365DA-H3 DSI panel")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240927135306.857617-1-hugo@hugovil.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240927135306.857617-1-hugo@hugovil.com
Fixed some spelling mistakes identified by misspell tool.
The example code in Documentation/driver-api/nvdimm/nvdimm.rst contained a
misspelled identifier (paramaters instead of parameters).
This typo would have caused a compilation error if copied as-is.
Signed-off-by: Aditya Dutt <duttaditya18@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250211103002.199004-1-duttaditya18@gmail.com
Kernel-doc has an obscure logic that uses an external file
to map files via a .tmp_filelist.txt file stored at the current
directory. The rationale for such code predates git time,
as it was added on Kernel v2.4.5.5, with the following description:
# 26/05/2001 - Support for separate source and object trees.
# Return error code.
# Keith Owens <kaos@ocs.com.au>
from commit 396a6123577d ("v2.4.5.4 -> v2.4.5.5") at the historic
tree:
https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/
Support for separate source and object trees is now done on a different
way via make O=<object>.
There's no logic to create such file, so it sounds to me that this is
just dead code.
So, drop it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/fd3b28dec36ba1668325d6770d4c4754414337fc.1739340170.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
-----BEGIN PGP SIGNATURE-----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=O6uZ
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix bugs about idle, kernel_page_present(), IP checksum and KVM, plus
some trival cleanups"
* tag 'loongarch-fixes-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Set host with kernel mode when switch to VM mode
LoongArch: KVM: Remove duplicated cache attribute setting
LoongArch: KVM: Fix typo issue about GCFG feature detection
LoongArch: csum: Fix OoB access in IP checksum code for negative lengths
LoongArch: Remove the deprecated notifier hook mechanism
LoongArch: Use str_yes_no() helper function for /proc/cpuinfo
LoongArch: Fix kernel_page_present() for KPRANGE/XKPRANGE
LoongArch: Fix idle VS timer enqueue
Fixes and new HW support:
- thinkpad_acpi:
- Fix registration of tpacpi platform driver
- Support fan speed in ticks per revolution (Thinkpad X120e)
- Support V9 DYTC profiles (new Thinkpad AMD platforms)
- int3472: Handle GPIO "enable" vs "reset" variation (ov7251)
The following is an automated shortlog grouped by driver:
int3472:
- Call "reset" GPIO "enable" for INT347E
- Use correct type for "polarity", call it gpio_flags
thinkpad_acpi:
- Fix invalid fan speed on ThinkPad X120e
- Fix registration of tpacpi platform driver
- Support for V9 DYTC platform profiles
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZ63igAAKCRBZrE9hU+XO
MW/TAQDbeIrh8Oy17XBXVYUMcLhuyQNGXQLQntMzxPzCL+aL7AD/T39y8bZFWlYg
lEvrv4B/YOjCZyfcst8lR7RrcMFo/Qs=
=olZn
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- thinkpad_acpi:
- Fix registration of tpacpi platform driver
- Support fan speed in ticks per revolution (Thinkpad X120e)
- Support V9 DYTC profiles (new Thinkpad AMD platforms)
- int3472: Handle GPIO "enable" vs "reset" variation (ov7251)
* tag 'platform-drivers-x86-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Fix registration of tpacpi platform driver
platform/x86: int3472: Call "reset" GPIO "enable" for INT347E
platform/x86: int3472: Use correct type for "polarity", call it gpio_flags
platform/x86: thinkpad_acpi: Support for V9 DYTC platform profiles
platform/x86: thinkpad_acpi: Fix invalid fan speed on ThinkPad X120e
The FiberGecko is a small USB module that connects a 100 Mbit/s SFP
Signed-off-by: Max Schulze <max.schulze@online.de>
Tested-by: Max Schulze <max.schulze@online.de>
Suggested-by: David Hollis <dhollis@davehollis.com>
Reported-by: Sven Kreiensen <s.kreiensen@lyconsys.com>
Link: https://patch.msgid.link/20250212150957.43900-2-max.schulze@online.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a check for the return value of mlxsw_sp_port_get_stats_raw()
in __mlxsw_sp_port_get_stats(). If mlxsw_sp_port_get_stats_raw()
returns an error, exit the function to prevent further processing
with potentially invalid data.
Fixes: 614d509aa1 ("mlxsw: Move ethtool_ops to spectrum_ethtool.c")
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250212152311.1332-1-vulab@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mld_newpack() can be called without RTNL or RCU being held.
Note that we no longer can use sock_alloc_send_skb() because
ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep.
Instead use alloc_skb() and charge the net->ipv6.igmp_sk
socket under RCU protection.
Fixes: b8ad0cbc58 ("[NETNS][IPV6] mcast - handle several network namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250212141021.1663666-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds support for the Intel Killer E5000 which seems to be a
rebranded RTL8126. Copied from r8126 vendor driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/9db73e9b-e2e8-45de-97a5-041c5f71d774@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As part of phylib cleanup we plan to stop exporting the feature arrays.
So explicitly remove the modes not supported by the MAC. The media type
bits don't have any impact on kernel behavior, so don't touch them.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Link: https://patch.msgid.link/be356a21-5a1a-45b3-9407-3a97f3af4600@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When initializing a soundwire slave device, an OF node is stored to the
device with refcount incremented. However, the refcount is not
decremented in .release(), thus call of_node_put() in
sdw_slave_release().
Fixes: a2e484585a ("soundwire: core: add device tree support for slave devices")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241205034844.2784964-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20250114200726.969501-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
As warned by get_abi.py, there are two symbols that are
defined twice:
WARNING: /sys/devices/system/cpu/cpuX/topology/physical_package_id is defined 2 times: \
/new_devel/v4l/docs/Documentation/ABI/stable/sysfs-devices-system-cpu:27; \
/new_devel/v4l/docs/Documentation/ABI/testing/sysfs-devices-system-cpu:70
WARNING: /sys/devices/system/cpu/cpuX/topology/ppin is defined 2 times: \
/new_devel/v4l/docs/Documentation/ABI/stable/sysfs-devices-system-cpu:89; \
/new_devel/v4l/docs/Documentation/ABI/testing/sysfs-devices-system-cpu:70
As the documentation at testing/sysfs-devices-system-cpu, drop
the duplicated one from stable.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/c3dce809f577584cf9aedafc6c2a0d5a9ca909ac.1739394480.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
For wake event, SoundWire host wake interrupt will be asserted based on
below pre-conditions for ACP7.0 & ACP7.1 platforms.
- ACP device should be in D0 state.
- SoundWire manager instance should be in D3 state.
- SoundWire manager device state should be set to D3.
- ACP_PME_EN should be set to 1.
Implement code changes to enable/disable SoundWire host wake interrupt mask
during suspend and resume as per design flow for ACP7.0 & ACP7.1 platforms.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20250207065841.4718-7-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Set SoundWire manager device power state during suspend and resume
sequence for ACP7.0 & ACP7.1 platforms.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20250207065841.4718-5-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
During runtime suspend scenario, SoundWire wake should be enabled and
during system level suspend scenario SoundWire wake should be disabled.
Implement the SoundWire wake enable/disable sequence as per design flow
for SoundWire poweroff mode.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20250207065841.4718-2-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Now, we can support more than 1 soundwire bus clock frequency.
This reverts commit c326356188 ("soundwire: intel_auxdevice: start
the bus at default frequency")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://lore.kernel.org/r/20250205074232.87537-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Frame shape and curr_dr_freq could be updated by sdw_compute_bus_params().
Peripherals will set curr_dr_freq as their frequency. Managers
should do the same. Then update frame shape according to the actual
bus frequency.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://lore.kernel.org/r/20250205074232.87537-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
On HCI_OP_RESET command, firmware raises alive interrupt. Driver needs
to wait for this before sending other command. This patch fixes the potential
miss of alive interrupt due to which HCI_OP_RESET can timeout.
Expected flow:
If tx command is HCI_OP_RESET,
1. set data->gp0_received = false
2. send HCI_OP_RESET
3. wait for alive interrupt
Actual flow having potential race:
If tx command is HCI_OP_RESET,
1. send HCI_OP_RESET
1a. Firmware raises alive interrupt here and in ISR
data->gp0_received is set to true
2. set data->gp0_received = false
3. wait for alive interrupt
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: 05c200c8f0 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware")
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Closes: https://patchwork.kernel.org/project/bluetooth/patch/20241001104451.626964-1-kiran.k@intel.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces a module for working with faux devices in rust, along with
adding sample code to show how the API is used. Unlike other types of
devices, we don't provide any hooks for device probe/removal - since these
are optional for the faux API and are unnecessary in rust.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Maíra Canal <mairacanal@riseup.net>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/2025021026-exert-accent-b4c6@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Many drivers abuse the platform driver/bus system as it provides a
simple way to create and bind a device to a driver-specific set of
probe/release functions. Instead of doing that, and wasting all of the
memory associated with a platform device, here is a "faux" bus that
can be used instead.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/2025021026-atlantic-gibberish-3f0c@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i2c_of_match_device() is not used anymore outside of I²C framework,
unexport it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Get matching data in one step by switching to use i2c_get_match_data().
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Switch to use my kernel.org address for I2C ACPI work.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
