This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Total patches: 36
Reviews/patch: 1.77
Reviewed rate: 83%
- The 2 patch series "mm/vmscan: fix demotion targets checks in
reclaim/demotion" from Bing Jiao fixes a couple of issues in the
demotion code - pages were failed demotion and were finding themselves
demoted into disallowed nodes.
- The 11 patch series "Remove XA_ZERO from error recovery of dup_mmap()"
from Liam Howlett fixes a rare mapledtree race and performs a number of
cleanups.
- The 13 patch series "mm: add bitmap VMA flag helpers and convert all
mmap_prepare to use them" from Lorenzo Stoakes implements a lot of
cleanups following on from the conversion of the VMA flags into a
bitmap.
- The 5 patch series "support batch checking of references and unmapping
for large folios" from Baolin Wang implements batching to greatly
improve the performance of reclaiming clean file-backed large folios.
- The 3 patch series "selftests/mm: add memory failure selftests" from
Miaohe Lin does as claimed.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaZaIEQAKCRDdBJ7gKXxA
jj73AQCQDwLoipDiQRGyjB5BDYydymWuDoiB1tlDPHfYAP3b/QD/UQtVlOEXqwM3
naOKs3NQ1pwnfhDaQMirGw2eAnJ1SQY=
=6Iif
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "mm/vmscan: fix demotion targets checks in reclaim/demotion" fixes a
couple of issues in the demotion code - pages were failed demotion
and were finding themselves demoted into disallowed nodes (Bing Jiao)
- "Remove XA_ZERO from error recovery of dup_mmap()" fixes a rare
mapledtree race and performs a number of cleanups (Liam Howlett)
- "mm: add bitmap VMA flag helpers and convert all mmap_prepare to use
them" implements a lot of cleanups following on from the conversion
of the VMA flags into a bitmap (Lorenzo Stoakes)
- "support batch checking of references and unmapping for large folios"
implements batching to greatly improve the performance of reclaiming
clean file-backed large folios (Baolin Wang)
- "selftests/mm: add memory failure selftests" does as claimed (Miaohe
Lin)
* tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (36 commits)
mm/page_alloc: clear page->private in free_pages_prepare()
selftests/mm: add memory failure dirty pagecache test
selftests/mm: add memory failure clean pagecache test
selftests/mm: add memory failure anonymous page test
mm: rmap: support batched unmapping for file large folios
arm64: mm: implement the architecture-specific clear_flush_young_ptes()
arm64: mm: support batch clearing of the young flag for large folios
arm64: mm: factor out the address and ptep alignment into a new helper
mm: rmap: support batched checks of the references for large folios
tools/testing/vma: add VMA userland tests for VMA flag functions
tools/testing/vma: separate out vma_internal.h into logical headers
tools/testing/vma: separate VMA userland tests into separate files
mm: make vm_area_desc utilise vma_flags_t only
mm: update all remaining mmap_prepare users to use vma_flags_t
mm: update shmem_[kernel]_file_*() functions to use vma_flags_t
mm: update secretmem to use VMA flags on mmap_prepare
mm: update hugetlbfs to use VMA flags on mmap_prepare
mm: add basic VMA flag operation helper functions
tools: bitmap: add missing bitmap_[subset(), andnot()]
mm: add mk_vma_flags() bitmap flag macro helper
...
In order to be able to use only vma_flags_t in vm_area_desc we must adjust
shmem file setup functions to operate in terms of vma_flags_t rather than
vm_flags_t.
This patch makes this change and updates all callers to use the new
functions.
No functional changes intended.
[akpm@linux-foundation.org: comment fixes, per Baolin]
Link: https://lkml.kernel.org/r/736febd280eb484d79cef5cf55b8a6f79ad832d2.1769097829.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Zi Yan <ziy@nvidia.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Yury Norov <ynorov@nvidia.com>
Cc: Chris Mason <clm@fb.com>
Cc: Pedro Falcato <pfalcato@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Total patches: 107
Reviews/patch: 1.07
Reviewed rate: 67%
- The 2 patch series "ocfs2: give ocfs2 the ability to reclaim
suballocator free bg" from Heming Zhao saves disk space by teaching
ocfs2 to reclaim suballocator block group space.
- The 4 patch series "Add ARRAY_END(), and use it to fix off-by-one
bugs" from Alejandro Colomar adds the ARRAY_END() macro and uses it in
various places.
- The 2 patch series "vmcoreinfo: support VMCOREINFO_BYTES larger than
PAGE_SIZE" from Pnina Feder makes the vmcore code future-safe, if
VMCOREINFO_BYTES ever exceeds the page size.
- The 7 patch series "kallsyms: Prevent invalid access when showing
module buildid" from Petr Mladek cleans up kallsyms code related to
module buildid and fixes an invalid access crash when printing
backtraces.
- The 3 patch series "Address page fault in
ima_restore_measurement_list()" from Harshit Mogalapalli fixes a
kexec-related crash that can occur when booting the second-stage kernel
on x86.
- The 6 patch series "kho: ABI headers and Documentation updates" from
Mike Rapoport updates the kexec handover ABI documentation.
- The 4 patch series "Align atomic storage" from Finn Thain adds the
__aligned attribute to atomic_t and atomic64_t definitions to get
natural alignment of both types on csky, m68k, microblaze, nios2,
openrisc and sh.
- The 2 patch series "kho: clean up page initialization logic" from
Pratyush Yadav simplifies the page initialization logic in
kho_restore_page().
- The 6 patch series "Unload linux/kernel.h" from Yury Norov moves
several things out of kernel.h and into more appropriate places.
- The 7 patch series "don't abuse task_struct.group_leader" from Oleg
Nesterov removes the usage of ->group_leader when it is "obviously
unnecessary".
- The 5 patch series "list private v2 & luo flb" from Pasha Tatashin
adds some infrastructure improvements to the live update orchestrator.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaY4giAAKCRDdBJ7gKXxA
jgusAQDnKkP8UWTqXPC1jI+OrDJGU5ciAx8lzLeBVqMKzoYk9AD/TlhT2Nlx+Ef6
0HCUHUD0FMvAw/7/Dfc6ZKxwBEIxyww=
=mmsH
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
acpi_evaluate_dsm_typed() returns an ACPI package in pkg.
When pkg->package.count == 0, we returned without freeing pkg,
leaking memory. Free pkg before returning on the empty case.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Fixes: 337d7a1621 ("drm/i915: Fix invalid access to ACPI _DSM objects")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260109032549.1826303-1-kaushlendra.kumar@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit c0a27a0ca8)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The pipe BPP value shouldn't be set outside of the source's / sink's
valid pipe BPP range, ensure this when increasing the minimum pipe BPP
value to 30 due to HDR.
While at it debug print if the HDR mode was requested for a connector by
setting the corresponding HDR connector property. This indicates
if the requested HDR mode could not be enabled, since the selected
pipe BPP is below 30, due to a sink capability or link BW limit.
v2:
- Also handle the case where the sink could support the target 30 BPP
only in DSC mode due to a BW limit, but the sink doesn't support DSC
or 30 BPP as a DSC input BPP. (Chaitanya)
- Debug print the connector's HDR mode in the link config dump, to
indicate if a BPP >= 30 required by HDR couldn't be reached. (Ankit)
- Add Closes: trailer. (Ankit)
- Don't print the 30 BPP-outside of valid BPP range debug message if
the min BPP is already > 30 (and so a target BPP >= 30 required
for HDR is ensured).
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7052
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15503
Fixes: ba49a4643c ("drm/i915/dp: Set min_bpp limit to 30 in HDR mode")
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: <stable@vger.kernel.org> # v6.18+
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> # v1
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260209133817.395823-1-imre.deak@intel.com
(cherry picked from commit 08b7ef16b6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors.
- Use pin_init::zeroed() for fops initialization.
- Annotate DRM helpers with __rust_helper.
- Improve safety documentation for gem::Object::new().
- Update AlwaysRefCounted imports.
- mm: Prevent integer overflow in page_align().
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switched to use virtual planes by default
- Fixed DSI CMD panels on DPU 3.x
- Rewrote format handling to remove intermediate representation
- Fixed watchdog on DPU 8.x+
- Fixed TE / Vsync source setting on DPU 8.x+
- Added 3D_Mux on SC7280
- Kaanapali platform support
- Fixed UBWC register programming
- Made RM reserve DSPP-enabled mixers for CRTCs with LMs.
- Gamma correction support
- DP:
- Enabled support for eDP 1.4+ link rate tables
- Fixed MDSS1 DP indices on SA8775P, making them to work
- Fixed msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Documented QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switched to divider_determine_rate()
- MDP5:
- Dropped support for MSM8998, SDM660 and SDM630 (switched over
to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation.
- Get rid of the Result<impl PinInit<T, E>> anti-pattern.
- Relocate initializer-specific code into the appropriate initializer.
- Use CStr::from_bytes_until_nul() to remove custom helpers.
- Improve handling of unexpected firmware values.
- Clean up redundant debug prints.
- Replace c_str!() with native Rust C-string literals.
- Update nova-core task list.
nova:
- Align GEM object size to system page size.
tyr:
- Use generated uAPI bindings for GpuInfo.
- Replace manual sleeps with read_poll_timeout().
- Replace c_str!() with native Rust C-string literals.
- Suppress warnings for unread fields.
- Fix incorrect register name in print statement.
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
-----BEGIN PGP SIGNATURE-----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=RFJ2
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list
nova:
- Align GEM object size to system page size
tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...
fair amount going on, including:
- Some signs of life on the long-moribund Japanese translation
- Documentation on policies around the use of generative tools for patch
submissions, and a separate document intended for consumption by
generative tools.
- The completion of the move of the documentation tools to tools/docs. For
now we're leaving a /scripts/kernel-doc symlink behind to avoid breaking
scripts.
- Ongoing build-system work includes the incorporation of documentation in
Python code, better support for documenting variables, and lots of
improvements and fixes.
- Automatic linking of man-page references -- cat(1), for example -- to
the online pages in the HTML build.
...and the usual array of typo fixes and such.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmmKM8YPHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YLK4H/2gqVxY8wKbVymiB95/zudiba8EtWlKE4hZl
KAd4+csZ8RCTMxHJLI23FXOi56CYr3XOQol0DIDUGimQiQx/Cxa2QDWewpkqbNH1
tHPTaNWAj16wKzrZxXhWt+6FoBHd7wrqilLH180IRmezRhu+7kURQ5XEAAXfK08B
CfDXBsCpnGsKn+m72x04cpvnsf/iK3pznbKrZ0ZYGIoaZb6+BV3+jqVaLROWSQZt
Nvt1rYjsi0vaeNapbQL8q72UJ/+zO4nK9am13s7p20zD+jUVY48yfQB/ZqvHp/1L
aymcJUCq0h5sSOHnfSqY5MTZUR/0CK+npRcEPgDYzLBigc9XU9g=
=hHq1
-----END PGP SIGNATURE-----
Merge tag 'docs-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux
Pull documentation updates from Jonathan Corbet:
"A slightly calmer cycle for docs this time around, though there is
still a fair amount going on, including:
- Some signs of life on the long-moribund Japanese translation
- Documentation on policies around the use of generative tools for
patch submissions, and a separate document intended for consumption
by generative tools
- The completion of the move of the documentation tools to
tools/docs. For now we're leaving a /scripts/kernel-doc symlink
behind to avoid breaking scripts
- Ongoing build-system work includes the incorporation of
documentation in Python code, better support for documenting
variables, and lots of improvements and fixes
- Automatic linking of man-page references -- cat(1), for example --
to the online pages in the HTML build
...and the usual array of typo fixes and such"
* tag 'docs-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (107 commits)
doc: development-process: add notice on testing
tools: sphinx-build-wrapper: improve its help message
docs: sphinx-build-wrapper: allow -v override -q
docs: kdoc: Fix pdfdocs build for tools
docs: ja_JP: process: translate 'Obtain a current source tree'
docs: fix 're-use' -> 'reuse' in documentation
docs: ioctl-number: fix a typo in ioctl-number.rst
docs: filesystems: ensure proc pid substitutable is complete
docs: automarkup.py: Skip common English words as C identifiers
Documentation: use a source-read extension for the index link boilerplate
docs: parse_features: make documentation more consistent
docs: add parse_features module documentation
docs: jobserver: do some documentation improvements
docs: add jobserver module documentation
docs: kabi: helpers: add documentation for each "enum" value
docs: kabi: helpers: add helper for debug bits 7 and 8
docs: kabi: system_symbols: end docstring phrases with a dot
docs: python: abi_regex: do some improvements at documentation
docs: python: abi_parser: do some improvements at documentation
docs: add kabi modules documentation
...
Update the device ID for Dell XPS 13 7390 2-in-1 in the quirk
`QUIRK_EDP_LIMIT_RATE_HBR2` entry. The previous ID (0x8a12) was
incorrect; the correct ID is 0x8a52.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/5969
Fixes: 21c586d923 ("drm/i915/dp: Add device specific quirk to limit eDP rate to HBR2")
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: <stable@vger.kernel.org> # v6.18+
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20251226043359.2553-1-ankit.k.nautiyal@intel.com
(cherry picked from commit c7c30c4093)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Pixel normalizer is enabled with normalization factor as 1.0 for
FP16 formats in order to support FBC for those formats in xe3p_lpd.
Previously pixel normalizer gets disabled during the plane disable
routine. But there could be plane format settings without explicitly
calling the plane disable in-between and we could endup keeping the
pixel normalizer enabled for formats which we don't require that.
This is causing crc mismatches in yuv formats and FIFO underruns in
planar formats like NV12. Fix this by updating the pixel normalizer
configuration based on the pixel formats explicitly during the plane
settings arm calls itself - enable it for FP16 and disable it for
other formats in HDR capable planes.
v2: avoid redundant pixel normalization setting updates
v3: moved the normalization factor definition to intel_fbc.c and some
updates to comments
v4: simplified the pixel normalizer setting handling
Fixes: 5298eea7ed ("drm/i915/xe3p_lpd: use pixel normalizer for fp16 formats for FBC")
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patch.msgid.link/20260130095919.107805-1-vinod.govindapillai@intel.com
(cherry picked from commit c0dc68f4e2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Patch series "Unload linux/kernel.h", v5.
kernel.h hosts declarations that can be placed better. This series
decouples kernel.h with some explicit and implicit dependencies; also,
moves tracing functionality to a new independent header.
This patch (of 6):
The macro was introduced in 1994, v1.0.4, for stacks protection. Since
that, people found better ways to protect stacks, and now the macro is
only used by i915 selftests. Move it to a local header and drop from the
kernel.h.
Link: https://lkml.kernel.org/r/20260116042510.241009-1-ynorov@nvidia.com
Link: https://lkml.kernel.org/r/20260116042510.241009-2-ynorov@nvidia.com
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAml2lQweHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG0dcH/2yLU3IKlHSSgEDL
Qq3oBuRK/zoVOdy+CM+TmTdl2d1LnBd8J547xFStB7kVGf5mEkdFZdHLBSHRnKDf
ia1SGec06kyLpRX6x5T6FsfwOhkBmVsp59X0coM57QWxxenybugtzPvDO2TQ8/G4
buixJI0jJVgwRwXNzWB4n2W6FxNGui2A7gEN2mjtvkM2t/aDkiDjEqB8ve0pZJX9
4EWhxOgRFzwWgkd/bY+4wgXVXEt3GtI+3VvNncRqLIO00A/AnZOYmH4S2RQUDszD
IbyDscYYxloZcZMDXc3PN2WgD9DCGKuP3GpJGsOHbl0DN6JkqI9nwGsOFZKGVOeF
vbajwPE=
=iAOa
-----END PGP SIGNATURE-----
BackMerge tag 'v6.19-rc7' into drm-next
Linux 6.19-rc7
This is needed for msm and rust trees.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Static analysis reveals a potential integer underflow in
intel_fbc_stolen_end. This can apparently occur if
intel_parent_stolen_area_size returns zero (or, theoretically, any value
less than 2^23), as 2^23 is subtracted from the return value and stored
in a u64. While this doesn't appear to cause any issues due to the use
of the min() function to clamp the return values from the
intel_fbc_stolen_end function, it would be best practice to avoid
undeflowing values like this on principle. So, rework the function to
prevent the underflow from occurring. Note that the underflow at
present would result in the value of intel_fbc_cfb_base_max being
returned at the end of intel_fbc_stolen_end, so just return that if the
value of intel_parent_stolen_area_size is too small.
While we're here, fix the other comments here and modify the execution
path for readability.
v2: (Jani)
- Fix the comments in intel_fbc_stolen_end
- Use check_sub_overflow
- Remove macro that mirrors SZ_8M, as it is now only referenced once
- Misc. formatting fixes
Fixes: a9da512b3e ("drm/i915: avoid the last 8mb of stolen on BDW/SKL")
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260107162935.8123-2-jonathan.cavitt@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 6695dc2798)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
intel_color_pipeline_plane_init() allocates enum names for color
pipelines, which are copied by drm_property_create_enum(). The temporary
strings were not freed, resulting in a memory leak.
Allocate enum names only after successful pipeline construction and free
them on all exit paths.
Fixes: ef10531681 ("drm/i915/color: Create a transfer function color pipeline")
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260113102303.724205-5-chaitanya.kumar.borah@intel.com
Move the 3D LUT block to its correct position in the plane
color pipeline:
[Pre-CSC] -> [CSC] -> [3DLUT] -> [Post-CSC]
Fixes: 65db7a1f9c ("drm/i915/color: Add 3D LUT to color pipeline")
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260113102303.724205-2-chaitanya.kumar.borah@intel.com
kernel-doc is the last documentation-related tool still living outside of
the tools/docs directory; the time has come to move it over.
[mchehab: fixed kdoc lib location]
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <311d17e403524349940a8b12de6b5e91e554b1f4.1768823489.git.mchehab+huawei@kernel.org>
With some panels informing support for Panel Replay we are observing
problems if having Panel Replay enable bit set on sink when forced to use
PSR instead of Panel Replay. Avoid these problems by not setting Panel
Replay enable bit in sink when Panel Replay is globally disabled during
link training. I.e. disabled by module parameter.
The enable bit is still set when disabling Panel Replay via debugfs
interface. Added note comment about this.
Fixes: 68f3a505b3 ("drm/i915/psr: Enable Panel Replay on sink always when it's supported")
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v6.15+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patch.msgid.link/20260115070039.368965-1-jouni.hogander@intel.com
(cherry picked from commit c5a52cd04e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Driver Changes:
- Bump recommended GuC version for DG2 and MTL
- Fix for syzkaller found NULL deref in execbuf (Krzyssztof, Gangmin)
- Use designated initializers in debugfs code (Sebastian)
- Selftest and static checker fixes (Ard, Sk)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patch.msgid.link/aWnzOx78S4Vh38QE@jlahtine-mobl
- Make 'guc_hw_reg_state' static as it isn't exported (Ben)
- Fix doc build on mei related interface header (Jani)
Display related:
- Fix ggtt fb alignment on Xe display (Tvrtko)
- More display clean-up towards deduplication and full separation (Jani)
- Use the consolidated HDMI tables (Suraj)
- Account for DSC slice overhead (Ankit)
- Prepare GVT for display modularization (Ankit, Jani)
- Enable/Disable DC balance along with VRR DSB (Mitul, Ville)
- Protection against unsupported modes in LT PHY (Suraj)
- Display W/a addition and fixes (Gustavo)
- Fix many SPDX identifier comments (Ankit)
- Incorporate Xe3_LPD changes for CD2X divider (Gustavo)
- Clean up link BW/DSC slice config computation (Imre)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAmlpDOcACgkQ+mJfZA7r
E8pWZwf/Rxj3MBgS2TNtGj2w+vwWAJqVwsbIj3PZXp+0uuH7mWeuG9v9kZP8m16N
SSeKXt+/5ShSc1KZwhVlhvfRk1hMyQ4CDmjURZ2IdV/qxMskeUnMdGaoPdpWpPKq
YT0HaT2BcMR2dmEDzC7HzCj12Jz1JuxaMrY2AHX4iCYhfMuabtpiz1qiKtGbrSrZ
/xy0V+mM0Lrjx10z7AH8ej4UW7u0Y7MKzmGK7Xa7pydh/TD7CaeyM5YKuV02dd4e
W2B8Nqy+Zfll9Yw9iPBXo/8eex+vjhyGuGcqmemblWVDWmXdeXEiFUsdcy9ILWTl
x3rqacz3QvsrAYsg9lTaXmSM9ih/kw==
=Fjtv
-----END PGP SIGNATURE-----
Merge tag 'drm-intel-next-2026-01-15' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Beyond Display:
- Make 'guc_hw_reg_state' static as it isn't exported (Ben)
- Fix doc build on mei related interface header (Jani)
Display related:
- Fix ggtt fb alignment on Xe display (Tvrtko)
- More display clean-up towards deduplication and full separation (Jani)
- Use the consolidated HDMI tables (Suraj)
- Account for DSC slice overhead (Ankit)
- Prepare GVT for display modularization (Ankit, Jani)
- Enable/Disable DC balance along with VRR DSB (Mitul, Ville)
- Protection against unsupported modes in LT PHY (Suraj)
- Display W/a addition and fixes (Gustavo)
- Fix many SPDX identifier comments (Ankit)
- Incorporate Xe3_LPD changes for CD2X divider (Gustavo)
- Clean up link BW/DSC slice config computation (Imre)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/aWkNThVRSkGAfUVv@intel.com
The minimum/maximum DSC input (i.e. pipe) and compressed (i.e. link) BPP
limits are computed already in intel_dp_compute_config_limits(), so
there is no need to do this again in
mst_stream_dsc_compute_link_config() called later. Remove the
corresponding alignments from the latter function and use the
precomputed (aligned and within bounds) maximum pipe BPP and the min/max
compressed BPP values instead as-is.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-21-imre.deak@intel.com
intel_edp_dsc_compute_pipe_bpp() matches now
intel_dp_dsc_compute_pipe_bpp(), remove the former function.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-20-imre.deak@intel.com
Move computing the eDP compressed BPP value to the function computing
this for DP, allowing further simplifications later.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-19-imre.deak@intel.com
If dsc_compute_compressed_bpp() failed with a forced pipe BPP value
(where the forced pipe BPP value itself is valid within the min/max pipe
BPP limits), the function will also fail when called with the maximum
pipe BPP value: dsc_compute_compressed_bpp() will try all compressed
BPPs below the passed in pipe BPP value and if the function failed with
a given (low) compressed BPP value it will also fail with a compressed
BPP value higher than the one which failed already.
Based on the above remove the logic to retry computing a compressed BPP
value with the maximum pipe BPP value if computing the compressed BPP
failed already with the (lower) forced pipe BPP value.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-18-imre.deak@intel.com
The maximum pipe BPP value (used as the DSC input BPP) has been aligned
already to the corresponding source/sink input BPP capabilities in
intel_dp_compute_config_limits(). So it isn't needed to perform the same
alignment again in intel_dp_dsc_compute_pipe_bpp() called later, this
function can simply use the already aligned maximum pipe BPP value, do
that.
Also, there is no point in trying pipe BPP values lower than the
maximum: this would only make dsc_compute_compressed_bpp() start with a
lower _compressed_ BPP value, but this lower compressed BPP value has
been tried already when dsc_compute_compressed_bpp() was called with the
higher pipe BPP value (i.e. the first dsc_compute_compressed_bpp() call
tries already all the possible compressed BPP values which are all below
the pipe BPP value passed to it). Simplify the function accordingly
trying only the maximum pipe BPP value.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-17-imre.deak@intel.com
The maximum pipe BPP value (used as the DSC input BPP) has been aligned
already to the corresponding source/sink input BPP capabilities in
intel_dp_compute_config_limits(). So it isn't needed to perform the same
alignment again in intel_edp_dsc_compute_pipe_bpp() called later, this
function can simply use the already aligned maximum pipe BPP value, do
that.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-16-imre.deak@intel.com
The minimum/maximum compressed BPP values are aligned/bounded in
intel_dp_compute_link_bpp_limits() to the corresponding source limits.
The minimum compressed BPP value doesn't change afterwards, so no need
to align it again, remove that.
The maximum compressed BPP, which depends on the pipe BPP value still
needs to be aligned, since the pipe BPP value could change after the
above limits were computed, via intel_dp_force_dsc_pipe_bpp(). Use the
corresponding helper for this alignment instead of open-coding the same.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-15-imre.deak@intel.com
Atm, a DP DSC video mode's required BW vs. the available BW is
determined by calculating the maximum compressed BPP value allowed by
the available BW. Doing that using a closed-form formula as it's done
atm (vs. an iterative way) is problematic, since the overhead of the
required BW itself depends on the BPP value being calculated. Instead of
that calculate the required BW for the minimum compressed BPP value
supported both by the source and the sink and check this BW against the
available BW. This change also aligns the BW calculation during mode
validation with how this is done during state computation, calculating
the required effective data rate with the corresponding BW overhead.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-14-imre.deak@intel.com
Add intel_dp_mode_valid_with_dsc() and call this for an SST/MST mode
validation to prepare for a follow-up change using a way to verify the
mode's required BW the same way this is done elsewhere during state
computation (which in turn depends on the mode's effective data rate
with the corresponding BW overhead).
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-13-imre.deak@intel.com
Factor out compute_max_compressed_bpp_x16() also used during mode
validation in a follow-up change.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-12-imre.deak@intel.com
Factor out compute_min_compressed_bpp_x16() also used during mode
validation in a follow-up change.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-11-imre.deak@intel.com
Prepare for follow-up changes using dsc_throughput_quirk_max_bpp_x16()
without an intel_crtc_state pointer.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-10-imre.deak@intel.com
Prepare for follow-up changes also calling
intel_dp_dsc_min_sink_compressed_bpp() /
intel_dp_dsc_max_sink_compressed_bpp_x16()
without an intel_crtc_state.
While at it remove the stale function declarations from the header file.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-9-imre.deak@intel.com
The intel_dp pointer can be deducted from the connector pointer, so it's
enough to pass only connector to
intel_dp_compute_config_link_bpp_limits(), do so.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-8-imre.deak@intel.com
Align the minimum/maximum DSC compressed BPPs to the corresponding
source compressed BPP limits already when computing the BPP limits. This
alignment is also performed later during state computation, however
there is no reason to initialize the limits to an unaligned/incorrect
value.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-7-imre.deak@intel.com
Align the minimum/maximum DSC input BPPs to the corresponding sink DSC
input BPP capability limits already when computing the BPP limits. This
alignment is also performed later during state computation, however
there is no reason to initialize the limits to an unaligned/incorrect
value.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-6-imre.deak@intel.com
Factor out align_max_vesa_compressed_bpp_x16(), also used later for
computing the maximum DSC compressed BPP limit.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-5-imre.deak@intel.com
Factor out align_max_sink_dsc_input_bpp(), also used later for computing
the maximum DSC input BPP limit.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-4-imre.deak@intel.com
Drop the unused timeslots parameter from dsc_compute_link_config() and
other functions calling it.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20251222153547.713360-2-imre.deak@intel.com
The guc_hw_reg_state array is not exported, so make it static.
Fixes the following sparse warning:
drivers/gpu/drm/i915/i915_gpu_error.c:692:3: warning: symbol 'guc_hw_reg_state' was not declared. Should it be static?
Fixes: ba391a102e ("drm/i915/guc: Include the GuC registers in the error state")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260108201202.59250-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 701c474933)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
