Code cleanups, remove duplicate code, and updates for current
interfaces.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQSgX9xt+GwmrJEQ+euebuN7TNx1MQUCZkThOhQcaXJhLndlaW55
QGludGVsLmNvbQAKCRCebuN7TNx1MWUvAP9VuWLTc+bCguRMbArOsdE2T60780pR
DT12KXfwm/FvKAD9Hyz8S2CkwvdlwC5hqH2AmdpzDhpJ1f9LBpcsb6GUKwk=
=eZC/
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm updates from Ira Weiny:
"The changes include removing duplicate code and updating the nvdimm
tree to the current kernel interfaces such as using const for struct
device_type and changing the platform remove callback signature"
* tag 'libnvdimm-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: remove redundant assignment to variable rc
ndtest: Convert to platform remove callback returning void
nvdimm/btt: always set max_integrity_segments
nvdimm: remove nd_integrity_init
dax: constify the struct device_type usage
powerpc/papr_scm: Move duplicate definitions to common header files
Remove wrong mask on subsys_vendor_id. Both the Vendor ID and Subsystem
Vendor ID are u16 variables and are written to a u32 register of the
controller. The Subsystem Vendor ID was always 0 because the u16 value
was masked incorrectly with GENMASK(31,16) resulting in all lower 16
bits being set to 0 prior to the shift.
Remove both masks as they are unnecessary and set the register correctly
i.e., the lower 16-bits are the Vendor ID and the upper 16-bits are the
Subsystem Vendor ID.
This is documented in the RK3399 TRM section 17.6.7.1.17
[kwilczynski: removed unnecesary newline]
Fixes: cf590b0783 ("PCI: rockchip: Add EP driver for Rockchip PCIe controller")
Link: https://lore.kernel.org/linux-pci/20240403144508.489835-1-rick.wertenbroek@gmail.com
Signed-off-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: stable@vger.kernel.org
Finally something fun. Mike Rapoport does some cleanup to allow us to
take out module_alloc() out of modules into a new paint shedded execmem_alloc()
and execmem_free() so to make emphasis these helpers are actually used outside
of modules. It starts with a no-functional changes API rename / placeholders
to then allow architectures to define their requirements into a new shiny
struct execmem_info with ranges, and requirements for those ranges. Archs
now can intitialize this execmem_info as the last part of mm_core_init() if
they have to diverge from the norm. Each range is a known type clearly
articulated and spelled out in enum execmem_type.
Although a lot of this is major cleanup and prep work for future enhancements an
immediate clear gain is we get to enable KPROBES without MODULES now. That is
ultimately what motiviated to pick this work up again, now with smaller goal as
concrete stepping stone.
This has been sitting on linux-next for a little less than a month, a few issues
were found already and fixed, in particular an odd mips boot issue. Arch folks
reviewed the code too. This is ready for wider exposure and testing.
-----BEGIN PGP SIGNATURE-----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=Nsg4
-----END PGP SIGNATURE-----
Merge tag 'modules-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"Finally something fun. Mike Rapoport does some cleanup to allow us to
take out module_alloc() out of modules into a new paint shedded
execmem_alloc() and execmem_free() so to make emphasis these helpers
are actually used outside of modules.
It starts with a non-functional changes API rename / placeholders to
then allow architectures to define their requirements into a new shiny
struct execmem_info with ranges, and requirements for those ranges.
Archs now can intitialize this execmem_info as the last part of
mm_core_init() if they have to diverge from the norm. Each range is a
known type clearly articulated and spelled out in enum execmem_type.
Although a lot of this is major cleanup and prep work for future
enhancements an immediate clear gain is we get to enable KPROBES
without MODULES now. That is ultimately what motiviated to pick this
work up again, now with smaller goal as concrete stepping stone"
* tag 'modules-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
bpf: remove CONFIG_BPF_JIT dependency on CONFIG_MODULES of
kprobes: remove dependency on CONFIG_MODULES
powerpc: use CONFIG_EXECMEM instead of CONFIG_MODULES where appropriate
x86/ftrace: enable dynamic ftrace without CONFIG_MODULES
arch: make execmem setup available regardless of CONFIG_MODULES
powerpc: extend execmem_params for kprobes allocations
arm64: extend execmem_info for generated code allocations
riscv: extend execmem_params for generated code allocations
mm/execmem, arch: convert remaining overrides of module_alloc to execmem
mm/execmem, arch: convert simple overrides of module_alloc to execmem
mm: introduce execmem_alloc() and execmem_free()
module: make module_memory_{alloc,free} more self-contained
sparc: simplify module_alloc()
nios2: define virtual address space for modules
mips: module: rename MODULE_START to MODULES_VADDR
arm64: module: remove unneeded call to kasan_alloc_module_shadow()
kallsyms: replace deprecated strncpy with strscpy
module: allow UNUSED_KSYMS_WHITELIST to be relative against objtree.
Booting an LPAE-enabled kernel built with CONFIG_CC_OPTIMIZE_FOR_SIZE=y
fails when starting userspace:
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
CPU: 1 PID: 1 Comm: init Tainted: G W N 6.9.0-rc1-koelsch-00004-g7af5b901e847 #1930
Hardware name: Generic R-Car Gen2 (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x78/0xa8
dump_stack_lvl from panic+0x118/0x398
panic from do_exit+0x1ec/0x938
do_exit from sys_exit_group+0x0/0x10
---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004 ]---
Add the missing memory clobber to cpu_set_ttbcr(), as suggested by
Russell King.
Force inlining of uaccess_save_and_enable(), as suggested by Ard
Biesheuvel.
The latter fixes booting on Koelsch.
Closes: https://lore.kernel.org/r/CAMuHMdWTAJcZ9BReWNhpmsgkOzQxLNb5OhNYxzxv6D5TSh2fwQ@mail.gmail.com/
Fixes: 7af5b901e8 ("ARM: 9358/2: Implement PAN for LPAE by TTBR0 page table walks disablement")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-----BEGIN PGP SIGNATURE-----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=RBMT
-----END PGP SIGNATURE-----
Merge tag 'livepatching-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching update from Petr Mladek:
- Use more informative names for the livepatch transition states
* tag 'livepatching-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Rename KLP_* to KLP_TRANSITION_*
-----BEGIN PGP SIGNATURE-----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=y45P
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Use no_printk() instead of "if (0) printk()" constructs to avoid
generating printk index for messages disabled at compile time
- Remove deprecated strncpy/strcpy from printk.c
- Remove redundant CONFIG_BASE_FULL in favor of CONFIG_BASE_SMALL
* tag 'printk-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: cleanup deprecated uses of strncpy/strcpy
printk: Remove redundant CONFIG_BASE_FULL
printk: Change type of CONFIG_BASE_SMALL to bool
printk: Fix LOG_CPU_MAX_BUF_SHIFT when BASE_SMALL is enabled
ceph: Use no_printk() helper
dyndbg: Use *no_printk() helpers
dev_printk: Add and use dev_no_printk()
printk: Let no_printk() use _printk()
When running syzkaller with the newly reintroduced signed integer wrap
sanitizer we encounter this splat:
[ 366.015950] UBSAN: signed-integer-overflow in ../drivers/cdrom/cdrom.c:2361:33
[ 366.021089] -9223372036854775808 - 346321 cannot be represented in type '__s64' (aka 'long long')
[ 366.025894] program syz-executor.4 is using a deprecated SCSI ioctl, please convert it to SG_IO
[ 366.027502] CPU: 5 PID: 28472 Comm: syz-executor.7 Not tainted 6.8.0-rc2-00035-gb3ef86b5a957 #1
[ 366.027512] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 366.027518] Call Trace:
[ 366.027523] <TASK>
[ 366.027533] dump_stack_lvl+0x93/0xd0
[ 366.027899] handle_overflow+0x171/0x1b0
[ 366.038787] ata1.00: invalid multi_count 32 ignored
[ 366.043924] cdrom_ioctl+0x2c3f/0x2d10
[ 366.063932] ? __pm_runtime_resume+0xe6/0x130
[ 366.071923] sr_block_ioctl+0x15d/0x1d0
[ 366.074624] ? __pfx_sr_block_ioctl+0x10/0x10
[ 366.077642] blkdev_ioctl+0x419/0x500
[ 366.080231] ? __pfx_blkdev_ioctl+0x10/0x10
...
Historically, the signed integer overflow sanitizer did not work in the
kernel due to its interaction with `-fwrapv` but this has since been
changed [1] in the newest version of Clang. It was re-enabled in the
kernel with Commit 557f8c582a ("ubsan: Reintroduce signed overflow
sanitizer").
Let's rearrange the check to not perform any arithmetic, thus not
tripping the sanitizer.
Link: https://github.com/llvm/llvm-project/pull/82432 [1]
Closes: https://github.com/KSPP/linux/issues/354
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/lkml/20240507-b4-sio-ata1-v1-1-810ffac6080a@google.com
Reviewed-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/lkml/ZjqU0fbzHrlnad8D@equinox
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20240507222520.1445-2-phil@philpotter.co.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=VpdY
-----END PGP SIGNATURE-----
Merge tag '6.10-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- three important fixes to recent netfs conversion to fix various
xfstest failures, and rmmod oops
- cleanup patch to fix various GCC-14 warnings
* tag '6.10-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix perf regression with cached writes with netfs conversion
cifs: Fix locking in cifs_strict_readv()
cifs: Change from mempool_destroy to mempool_exit for request pools
smb: smb2pdu.h: Avoid -Wflex-array-member-not-at-end warnings
Choices and their members are associated via the P_CHOICE property.
Currently, prop_get_symbol(sym_get_choice_prop()) is used to obtain
the choice of the given choice member.
Replace it with sym_get_choice_menu(), which retrieves the choice
without relying on P_CHOICE.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This file was supposed to be removed in commit 2b7deea3ec ("Revert
"kvm: selftests: move base kvm_util.h declarations to kvm_util_base.h""),
but it survived. Remove it now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This one became bigger than usual, not in the total size but rather
containing lots of small changes all over the places. The majority of
changes are about ASoC, especially SOF / Intel stuff, and we see an
interesting work for ASoC DAPM graph visualization, while there are
many other code cleanup and refactoring, too.
Core:
- A deadlock fix at device disconnection
- A new tool dapm-graph for visualising the DAPM state
ASoC:
- Large updates throughout the Intel audio drivers
- Fixes and clarifications for the DAPM documentation
- Cleanups of accessors for driver data, module labelling, and for
constification
- Modernsation and cleanup work in the Mediatek drivers
- Several fixes and features for the DaVinci I2S driver
- New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
Rockchip RK3308 and Texas Instruments PCM6240
HD-audio:
- Cleanup for CONFIG_PM dependencies
- Cirrus HD-audio codec fixes and quirks
Others:
- Series of tree-wide fixes in Makefiles to use *-y
- Additions of missing module descriptions
- Scarlett2 USB mixer enhancements
- A series of legacy emu10k1 fixes and improvements
-----BEGIN PGP SIGNATURE-----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=YKT4
-----END PGP SIGNATURE-----
Merge tag 'sound-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"This one became bigger than usual, not in the total size but rather
containing lots of small changes all over the places.
The majority of changes are about ASoC, especially SOF / Intel stuff,
and we see an interesting work for ASoC DAPM graph visualization,
while there are many other code cleanup and refactoring, too.
Core:
- A deadlock fix at device disconnection
- A new tool dapm-graph for visualising the DAPM state
ASoC:
- Large updates throughout the Intel audio drivers
- Fixes and clarifications for the DAPM documentation
- Cleanups of accessors for driver data, module labelling, and for
constification
- Modernsation and cleanup work in the Mediatek drivers
- Several fixes and features for the DaVinci I2S driver
- New drivers for several AMD and Intel platforms, Nuvoton NAU8325,
Rockchip RK3308 and Texas Instruments PCM6240
HD-audio:
- Cleanup for CONFIG_PM dependencies
- Cirrus HD-audio codec fixes and quirks
Others:
- Series of tree-wide fixes in Makefiles to use *-y
- Additions of missing module descriptions
- Scarlett2 USB mixer enhancements
- A series of legacy emu10k1 fixes and improvements"
* tag 'sound-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (603 commits)
ALSA: hda/realtek: Drop doubly quirk entry for 103c:8a2e
ALSA: hda/realtek - fixed headset Mic not show
ASoC: SOF: amd: Fix build error with built-in config
ALSA: scarlett2: Increase mixer range to +12dB
ALSA: scarlett2: Add S/PDIF source selection controls
ALSA: core: Remove superfluous CONFIG_PM
ALSA: Fix deadlocks with kctl removals at disconnection
ASoC: audio-graph-card2: call of_node_get() before of_get_next_child()
ASoC: SOF: amd: Correct spaces in Makefile
ASoC: rt715-sdca-sdw: Fix wrong complete waiting in rt715_dev_resume()
ASoC: Intel: sof_sdw_rt_amp: use dai parameter
ASoC: Intel: sof_sdw: add dai parameter to rtd_init callback
ASoC: Intel: sof_sdw: use .controls/.widgets to add controls/widgets
ASoC: Intel: sof_sdw: add controls and dapm widgets in codec_info
ASoC: Intel: sof_sdw: use generic name for controls/widgets
ASoC: Intel: sof_sdw_cs_amp: rename Speakers to Speaker
ASoC: Intel: maxim-common: change max98373 data to static
ASoC: Intel: sof_sdw: add max98373 dapm routes
ASoC: Intel: sof_rt5682: use max_98373_dai_link function
ASoC: Intel: sof_nau8825: use max_98373_dai_link function
...
Code cleanups for offb, shmobile, sisfb, savage, au1200fb, uvesafb,
omap2 and sh7760fb, as well as the addition of some HAS_IOPORT
dependencies and adjustment of generated logo file to make build
reproducible.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZkSoqQAKCRD3ErUQojoP
Xx6yAQC8ov8IrH0bqaSDC1tNygGm4FhE658DbB/RxOzXYoHtlAD/cCjPcYGruTr8
EG+/Pq5mmGR8IYY6ANl7UAEIOjatHQc=
=D2j+
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Code cleanups for offb, shmobile, sisfb, savage, au1200fb, uvesafb,
omap2 and sh7760fb, as well as the addition of some HAS_IOPORT
dependencies and adjustment of generated logo file to make build
reproducible"
* tag 'fbdev-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: offb: replace of_node_put with __free(device_node)
fbdev: savage: Handle err return when savagefb_check_var failed
video: hdmi: prefer length specifier in format over string copying
fbdev: uvesafb: replace deprecated strncpy with strscpy_pad
fbdev: au1200fb: replace deprecated strncpy with strscpy
fbdev: fsl-diu-fb: replace deprecated strncpy with strscpy_pad
video: logo: Drop full path of the input filename in generated file
fbdev: add HAS_IOPORT dependencies
fbdev: sh7760fb: allow modular build
fbdev: sisfb: hide unused variables
fbdev: shmobile: fix snprintf truncation
fbdev: omap2: replace of_graph_get_next_endpoint()
new drivers:
- panthor: ARM Mali/Immortalis CSF-based GPU driver
core:
- add a CONFIG_DRM_WERROR option
- make more headers self-contained
- grab resv lock in pin/unpin
- fix vmap resv locking
- EDID/eDP panel matching
- Kconfig cleanups
- DT sound bindings
- Add SIZE_HINTS property for cursor planes
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- drop seq_file.h from a bunch of places
- use drm_edid driver conversions
dp:
- DP Tunnel documentation
- MST read sideband cap
- Adaptive sync SDP prep work
ttm:
- improve placement for TTM BOs in idle/busy handling
panic:
- Fixes for drm-panic, and option to test it.
- Add drm panic to simpledrm, mgag200, imx, ast
bridge:
- improve init ordering
- adv7511: allow GPIO pin sharing
- tc358775: add tc358675 support
panel:
- AUO B120XAN01.0
- Samsung s6e3fa7
- BOE NT116WHM-N44
- CMN N116BCA-EA1,
- CrystalClear CMT430B19N00
- Startek KD050HDFIA020-C020A
- powertip PH128800T006-ZHC01
- Innolux G121X1-L03
- LG sw43408
- Khadas TS050 V2
- EDO RM69380 OLED
- CSOT MNB601LS1-1
amdgpu:
- HDCP/ODM/RAS fixes
- Devcoredump improvements
- Expose VCN activity via sysfs
- SMY 13.0.x updates
- Enable fast updates on DCN 3.1.4
- Add dclk and vclk reporting on additional devices
- Add ACA RAS infrastructure
- Implement TLB flush fence
- EEPROM handling fixes
- SMUIO 14.0.2 support
- SMU 14.0.1 Updates
- SMU 14.0.2 support
- Sync page table freeing with TLB flushes
- DML2 refactor
- DC debug improvements
- DCN 3.5.x Updates
- GPU reset fixes
- HDP fix for second GFX pipe on GC 10.x
- Enable secondary GFX pipe on GC 10.3
- Refactor and clean up BACO/BOCO/BAMACO handling
- Remove invalid TTM resource start check
- UAF fix in VA IOCTL
- GPUVM page fault redirection to secondary IH rings for IH 6.x
- Initial support for mapping kernel queues via MES
- Fix VRAM memory accounting
amdkfd:
- MQD handling cleanup
- Preemption handling fixes for XCDs
- TLB flush fix for GC 9.4.2
- Properly clean up workqueue during module unload
- Fix memory leak process create failure
- Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
- Fix eviction fence handling
- Fix leak in GPU memory allocation failure case
- DMABuf import handling fix
- Enable SQ watchpoint for gfx10
i915:
- Adding new DG2 PCI ID
- add context hints for GT frequency
- enable only one CCS for compute workloads
- new workarounds
- Fix UAF on destroy against retire race and remove two earlier partial fixes
- Limit the reserved VM space to only the platforms that need it
- Fix gt reset with GuC submission is disable
- Add and use gt_to_guc() wrapper
i915/xe display:
- Lunar Lake display enabling, including cdclk and other refactors
- BIOS/VBT/opregion related refactor
- Digital port related refactor/clean-up
- Fix 2s boot time regression on DP panel replay init
- Remove duplication on audio enable/disable on SDVO and g4x+ DP
- Disable AuxCCS framebuffers if built for Xe
- Make crtc disable more atomic
- Increase DP idle pattern wait timeout to 2ms
- Start using container_of_const() for some extra const safety
- Fix Jasper Lake boot freeze
- Enable MST mode for 128b/132b single-stream sideband
- Enable Adaptive Sync SDP Support for DP
- Fix MTL supported DP rates - removal of UHBR13.5
- PLL refactoring
- Limit eDP MSO pipe only for display version 20
- More display refactor towards independence from i915 dev_priv
- Convert i915/xe fbdev to DRM client
- More initial work to make display code more independent from i915
xe:
- improved error capture
- clean up some uAPI leftovers
- devcoredump update
- Add BMG mocs table
- Handle GSCCS ER interrupt
- Implement xe2- and GuC workarounds
- struct xe_device cleanup
- Hwmon updates
- Add LRC parsing for more GPU instruction
- Increase VM_BIND number of per-ioctl Ops
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag
- Initial development for SR-IOV support
- Add new PCI IDs to DG2 platform
- Move userptr over to start using hmm_range_fault
msm:
- Switched to generating register header files during build process
instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.
- DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings
- GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support
radeon:
- Silence UBSAN warnings related to flexible arrays
nouveau:
- move some uAPI objects to uapi headers
omapdrm:
- console fix
ast:
- add i2c polling
qaic:
- add debugfs entries
exynos:
- fix platform_driver .owner
- drop cleanup code
mediatek:
- Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
- Add GAMMA 12-bit LUT support for MT8188
- Rename mtk_drm_* to mtk_*
- Drop driver owner initialization
- Correct calculation formula of PHY Timing
-----BEGIN PGP SIGNATURE-----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=ocVM
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"This is the main pull request for the drm subsystems for 6.10.
In drivers the main thing is a new driver for ARM Mali firmware based
GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and
scattered changes to everything else.
In the core a bunch of headers and Kconfig was refactored, along with
the addition of a new panic handler which is meant to provide a user
friendly message when a panic happens and graphical display is
enabled.
New drivers:
- panthor: ARM Mali/Immortalis CSF-based GPU driver
Core:
- add a CONFIG_DRM_WERROR option
- make more headers self-contained
- grab resv lock in pin/unpin
- fix vmap resv locking
- EDID/eDP panel matching
- Kconfig cleanups
- DT sound bindings
- Add SIZE_HINTS property for cursor planes
- Add struct drm_edid_product_id and helpers.
- Use drm device based logging in more drm functions.
- drop seq_file.h from a bunch of places
- use drm_edid driver conversions
dp:
- DP Tunnel documentation
- MST read sideband cap
- Adaptive sync SDP prep work
ttm:
- improve placement for TTM BOs in idle/busy handling
panic:
- Fixes for drm-panic, and option to test it.
- Add drm panic to simpledrm, mgag200, imx, ast
bridge:
- improve init ordering
- adv7511: allow GPIO pin sharing
- tc358775: add tc358675 support
panel:
- AUO B120XAN01.0
- Samsung s6e3fa7
- BOE NT116WHM-N44
- CMN N116BCA-EA1,
- CrystalClear CMT430B19N00
- Startek KD050HDFIA020-C020A
- powertip PH128800T006-ZHC01
- Innolux G121X1-L03
- LG sw43408
- Khadas TS050 V2
- EDO RM69380 OLED
- CSOT MNB601LS1-1
amdgpu:
- HDCP/ODM/RAS fixes
- Devcoredump improvements
- Expose VCN activity via sysfs
- SMY 13.0.x updates
- Enable fast updates on DCN 3.1.4
- Add dclk and vclk reporting on additional devices
- Add ACA RAS infrastructure
- Implement TLB flush fence
- EEPROM handling fixes
- SMUIO 14.0.2 support
- SMU 14.0.1 Updates
- SMU 14.0.2 support
- Sync page table freeing with TLB flushes
- DML2 refactor
- DC debug improvements
- DCN 3.5.x Updates
- GPU reset fixes
- HDP fix for second GFX pipe on GC 10.x
- Enable secondary GFX pipe on GC 10.3
- Refactor and clean up BACO/BOCO/BAMACO handling
- Remove invalid TTM resource start check
- UAF fix in VA IOCTL
- GPUVM page fault redirection to secondary IH rings for IH 6.x
- Initial support for mapping kernel queues via MES
- Fix VRAM memory accounting
amdkfd:
- MQD handling cleanup
- Preemption handling fixes for XCDs
- TLB flush fix for GC 9.4.2
- Properly clean up workqueue during module unload
- Fix memory leak process create failure
- Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
- Fix eviction fence handling
- Fix leak in GPU memory allocation failure case
- DMABuf import handling fix
- Enable SQ watchpoint for gfx10
i915:
- Adding new DG2 PCI ID
- add context hints for GT frequency
- enable only one CCS for compute workloads
- new workarounds
- Fix UAF on destroy against retire race and remove two earlier partial fixes
- Limit the reserved VM space to only the platforms that need it
- Fix gt reset with GuC submission is disable
- Add and use gt_to_guc() wrapper
i915/xe display:
- Lunar Lake display enabling, including cdclk and other refactors
- BIOS/VBT/opregion related refactor
- Digital port related refactor/clean-up
- Fix 2s boot time regression on DP panel replay init
- Remove duplication on audio enable/disable on SDVO and g4x+ DP
- Disable AuxCCS framebuffers if built for Xe
- Make crtc disable more atomic
- Increase DP idle pattern wait timeout to 2ms
- Start using container_of_const() for some extra const safety
- Fix Jasper Lake boot freeze
- Enable MST mode for 128b/132b single-stream sideband
- Enable Adaptive Sync SDP Support for DP
- Fix MTL supported DP rates - removal of UHBR13.5
- PLL refactoring
- Limit eDP MSO pipe only for display version 20
- More display refactor towards independence from i915 dev_priv
- Convert i915/xe fbdev to DRM client
- More initial work to make display code more independent from i915
xe:
- improved error capture
- clean up some uAPI leftovers
- devcoredump update
- Add BMG mocs table
- Handle GSCCS ER interrupt
- Implement xe2- and GuC workarounds
- struct xe_device cleanup
- Hwmon updates
- Add LRC parsing for more GPU instruction
- Increase VM_BIND number of per-ioctl Ops
- drm/xe: Add XE_BO_GGTT_INVALIDATE flag
- Initial development for SR-IOV support
- Add new PCI IDs to DG2 platform
- Move userptr over to start using hmm_range_fault
msm:
- Switched to generating register header files during build process
instead of shipping pre-generated headers
- Merged DPU and MDP4 format databases.
- DP:
- Stop using compat string to distinguish DP and eDP cases
- Added support for X Elite platform (X1E80100)
- Reworked DP aux/audio support
- Added SM6350 DP to the bindings
- GPU:
- a7xx perfcntr reg fixes
- MAINTAINERS updates
- a750 devcoredump support
radeon:
- Silence UBSAN warnings related to flexible arrays
nouveau:
- move some uAPI objects to uapi headers
omapdrm:
- console fix
ast:
- add i2c polling
qaic:
- add debugfs entries
exynos:
- fix platform_driver .owner
- drop cleanup code
mediatek:
- Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe()
- Add GAMMA 12-bit LUT support for MT8188
- Rename mtk_drm_* to mtk_*
- Drop driver owner initialization
- Correct calculation formula of PHY Timing"
* tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits)
drm/xe/ads: Use flexible-array
drm/xe: Use ordered WQ for G2H handler
drm/msm/gen_header: allow skipping the validation
drm/msm/a6xx: Cleanup indexed regs const'ness
drm/msm: Add devcoredump support for a750
drm/msm: Adjust a7xx GBIF debugbus dumping
drm/msm: Update a6xx registers XML
drm/msm: Fix imported a750 snapshot header for upstream
drm/msm: Import a750 snapshot registers from kgsl
MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver
MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers
drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails
drm/msm/adreno: fix CP cycles stat retrieval on a7xx
drm/msm/a7xx: allow writing to CP_BV counter selection registers
drm: zynqmp_dpsub: Always register bridge
Revert "drm/bridge: ti-sn65dsi83: Fix enable error path"
drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer()
drm/fbdev-generic: Do not set physical framebuffer address
drm/panthor: Fix the FW reset logic
drm/panthor: Make sure we handle 'unknown group state' case properly
...
ARRAY_OF_MAPS and HASH_OF_MAPS map types have special logic to save
a few extra fields required for correct operations of ARRAY maps, when
they are used as inner maps. PERCPU_ARRAY maps have similar
requirements as they now support generating inline element lookup
logic. So make sure that both classes of maps are handled correctly.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: db69718b8e ("bpf: inline bpf_map_lookup_elem() for PERCPU_ARRAY maps")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20240515062440.846086-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Zi Shen Lim is not actively doing kernel development and has decided to
tranfer the responsibility of maintaining the JIT to me.
Add myself as the maintainer for BPF JIT for ARM64 and remove Zi Shen
Lim.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Zi Shen Lim <zlim.lnx@gmail.com>
Link: https://lore.kernel.org/r/20240514183914.27737-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
An ALU instruction's source operand can be the value in the source
register or the 32-bit immediate value encoded in the instruction. This
is controlled by the 's' bit of the 'opcode'.
The current description explicitly uses the phrase 'value of the source
register' when defining the meaning of 'src'.
Change the description to use 'source operand' in place of 'value of the
source register'.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Dave Thaler <dthaler1968@gmail.com>
Link: https://lore.kernel.org/r/20240514130303.113607-1-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adjust `union bpf_attr` size passed to kernel in two feature-detecting
functions to take into account prog_token_fd field.
Libbpf is avoiding memset()'ing entire `union bpf_attr` by only using
minimal set of bpf_attr's fields. Two places have been missed when
wiring BPF token support in libbpf's feature detection logic.
Fix them trivially.
Fixes: f3dcee938f ("libbpf: Wire up token_fd into feature probing logic")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240513180804.403775-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adds a self-test testing PCKS#7 signed data against ECDSA key and
couple of bug fixes for missing deps.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iJYEABYKAD4WIQRE6pSOnaBC00OEHEIaerohdGur0gUCZkLGKyAcamFya2tvLnNh
a2tpbmVuQGxpbnV4LmludGVsLmNvbQAKCRAaerohdGur0jvXAP9yPAiK7nGu/xgj
Nx4xJnMnMDeS4br4Kisp232pLqovxgEAgabmbihLve5Dv1OzR+pNz6qNhackj4ra
C0RaWPFQlQQ=
=/eej
-----END PGP SIGNATURE-----
Merge tag 'asymmetric-keys-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull asymmetric keys update from Jarkko Sakkinen:
"Add a self-test testing PCKS#7 signed data against ECDSA key and
couple of bug fixes for missing deps"
* tag 'asymmetric-keys-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
certs: Add ECDSA signature verification self-test
certs: Move RSA self-test data to separate file
KEYS: asymmetric: Add missing dependencies of FIPS_SIGNATURE_SELFTEST
KEYS: asymmetric: Add missing dependency on CRYPTO_SIG
At lookup_extent_data_ref() we are incorrectly checking if we are at the
last slot of the last leaf in the extent tree. We are returning -ENOENT
if btrfs_next_leaf() returns a value greater than 1, but btrfs_next_leaf()
never returns anything greater than 1:
1) It returns < 0 on error;
2) 0 if there is a next leaf (or a new item was added to the end of the
current leaf after releasing the path);
3) 1 if there are no more leaves (and no new items were added to the last
leaf after releasing the path).
So fix this by checking if the return value is greater than zero instead
of being greater than one.
Fixes: 1618aa3c2e ("btrfs: simplify return variables in lookup_extent_data_ref()")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The following error message is displayed:
../fs/btrfs/scrub.c:2152:9: error: ‘ret’ may be used uninitialized
in this function [-Werror=maybe-uninitialized]"
Compiler version: gcc version: (Debian 10.2.1-6) 10.2.1 20210110
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While loading a zone's info during creation of a block group, we can race
with a device replace operation and then trigger a use-after-free on the
device that was just replaced (source device of the replace operation).
This happens because at btrfs_load_zone_info() we extract a device from
the chunk map into a local variable and then use the device while not
under the protection of the device replace rwsem. So if there's a device
replace operation happening when we extract the device and that device
is the source of the replace operation, we will trigger a use-after-free
if before we finish using the device the replace operation finishes and
frees the device.
Fix this by enlarging the critical section under the protection of the
device replace rwsem so that all uses of the device are done inside the
critical section.
CC: stable@vger.kernel.org # 6.1.x: 15c12fcc50: btrfs: zoned: introduce a zone_info struct in btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x: 09a46725cc: btrfs: zoned: factor out per-zone logic from btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x: 9e0e3e74dc: btrfs: zoned: factor out single bg handling from btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x: 87463f7e02: btrfs: zoned: factor out DUP bg handling from btrfs_load_block_group_zone_info
CC: stable@vger.kernel.org # 6.1.x
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we delete subvolumes whose ID is the largest in the filesystem, then
unmount and mount again, then btrfs_init_root_free_objectid on the
tree_root will select a subvolid smaller than that one and thus allow
reusing it.
If we are also using qgroups (and particularly squotas) it is possible
to delete the subvol without deleting the qgroup. In that case, we will
be able to create a new subvol whose id already has a level 0 qgroup.
This will result in re-using that qgroup which would then lead to
incorrect accounting.
Fixes: 6ed05643dd ("btrfs: create qgroup earlier in snapshot creation")
CC: stable@vger.kernel.org # 6.7+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
On filesystems without enabled quotas there's still a warning message in
the logs when rescan is called. In that case it's not a problem that
should be reported, rescan can be called unconditionally. Change the
error code to ENOTCONN which is used for 'quotas not enabled' elsewhere.
Remove message (also a warning) when rescan is called during an ongoing
rescan, this brings no useful information and the error code is
sufficient.
Change message levels to debug for now, they can be removed eventually.
CC: stable@vger.kernel.org # 6.6+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCZkQD2xQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5b81APwINCoiLDB0L9KkyUhQjqvLLZCS85u9
Qo3/wdUGAb2tygD/RYKJgtGxvqO1Ap1IysytKHId0yo+vokdXG5stpMPJQE=
=dIrw
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.10' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Two IMA changes, one EVM change, a use after free bug fix, and a code
cleanup to address "-Wflex-array-member-not-at-end" warnings:
- The existing IMA {ascii, binary}_runtime_measurements lists include
a hard coded SHA1 hash. To address this limitation, define per TPM
enabled hash algorithm {ascii, binary}_runtime_measurements lists
- Close an IMA integrity init_module syscall measurement gap by
defining a new critical-data record
- Enable (partial) EVM support on stacked filesystems (overlayfs).
Only EVM portable & immutable file signatures are copied up, since
they do not contain filesystem specific metadata"
* tag 'integrity-v6.10' of ssh://ra.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: add crypto agility support for template-hash algorithm
evm: Rename is_unsupported_fs to is_unsupported_hmac_fs
fs: Rename SB_I_EVM_UNSUPPORTED to SB_I_EVM_HMAC_UNSUPPORTED
evm: Enforce signatures on unsupported filesystem for EVM_INIT_X509
ima: re-evaluate file integrity on file metadata change
evm: Store and detect metadata inode attributes changes
ima: Move file-change detection variables into new structure
evm: Use the metadata inode to calculate metadata hash
evm: Implement per signature type decision in security_inode_copy_up_xattr
security: allow finer granularity in permitting copy-up of security xattrs
ima: Rename backing_inode to real_inode
integrity: Avoid -Wflex-array-member-not-at-end warnings
ima: define an init_module critical data record
ima: Fix use-after-free on a dentry's dname.name
We got an error report about headphone type detection and button detection.
We fixed the headphone type detection error by adjusting the condition
of setting es8326->hp to 0.And we fixed the button detection error by
adjusting micbias and vref.
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://msgid.link/r/20240515062517.23661-1-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----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=2Wbi
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20240513' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
- Attempt to pre-allocate the SELinux status page so it doesn't appear
to userspace that we are skipping SELinux policy sequence numbers
- Reject invalid SELinux policy bitmaps with an error at policy load
time
- Consistently use the same type, u32, for ebitmap offsets
- Improve the "symhash" hash function for better distribution on common
policies
- Correct a number of printk format specifiers in the ebitmap code
- Improved error checking in sel_write_load()
- Ensure we have a proper return code in the
filename_trans_read_helper_compat() function
- Make better use of the current_sid() helper function
- Allow for more hash table statistics when debugging is enabled
- Migrate from printk_ratelimit() to pr_warn_ratelimited()
- Miscellaneous cleanups and tweaks to selinux_lsm_getattr()
- More consitification work in the conditional policy space
* tag 'selinux-pr-20240513' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: constify source policy in cond_policydb_dup()
selinux: avoid printk_ratelimit()
selinux: pre-allocate the status page
selinux: clarify return code in filename_trans_read_helper_compat()
selinux: use u32 as bit position type in ebitmap code
selinux: improve symtab string hashing
selinux: dump statistics for more hash tables
selinux: make more use of current_sid()
selinux: update numeric format specifiers for ebitmaps
selinux: improve error checking in sel_write_load()
selinux: cleanup selinux_lsm_getattr()
selinux: reject invalid ebitmaps
The ntsync code is only partially enabled in the kernel at this point in
time, creating the device node and that's about it. Don't confuse
systems that expect to see a working ntsync interface by teasing it with
this basic structure at this point in time, so mark the code as "broken"
so that it is not built and enabled just yet.
Once the rest of the code is accepted, this will be reverted so that the
driver can be correctly built and used, but for now, this is the safest
way forward.
Reviewed-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/2024051450-abrasion-swizzle-550b@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=F3Tz
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20240513' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- The security/* portion of the effort to remove the empty sentinel
elements at the end of the ctl_table arrays
- Update the file list associated with the LSM / "SECURITY SUBSYSTEM"
entry in the MAINTAINERS file (and then fix a typo in then update)
* tag 'lsm-pr-20240513' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
MAINTAINERS: repair file entry in SECURITY SUBSYSTEM
MAINTAINERS: update the LSM file list
lsm: remove the now superfluous sentinel element from ctl_table array
Define the HAVE_ARCH_HUGETLB_UNMAPPED_AREA macro like other platforms do in
their page.h files to avoid this compile warning:
arch/parisc/mm/hugetlbpage.c:25:1: warning: no previous prototype for 'hugetlb_get_unmapped_area' [-Wmissing-prototypes]
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 6.0+
Reported-by: John David Anglin <dave.anglin@bell.net>
Tested-by: John David Anglin <dave.anglin@bell.net>
dtschema package with core schemas deprecated pci-bus.yaml schema in
favor of individual schemas per host, device and pci-pci.
Switch Mediatek MT7621 PCIe host bridge binding to this new schema.
This requires dtschema package newer than v2024.02 to work fully.
v2024.02 will partially work: with a warning.
Link: https://lore.kernel.org/linux-pci/20240413151617.35630-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
dtschema package with core schemas deprecated pci-bus.yaml schema in
favor of pci-host-bridge.yaml. Update all bindings to use the latter
one.
The difference between pci-bus.yaml and pci-host-bridge.yaml is only in
lack of "reg" property defined by the latter, which should not have any
effect here, because all these bindings define the "reg".
The change is therefore quite trivial, however it requires dtschema
package v2024.02 or newer.
Link: https://lore.kernel.org/linux-pci/20240413151617.35630-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # Renesas
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
MT7621 PCI host bridge has children which are PCI root ports. The
children have "reg" property, but do not explicitly define it. Instead
they rely on pci-bus.yaml schema, but that one has "reg" without any
constraints.
Define the "reg" for the children, so the binding will be more specific
and later will allow dropping reference to deprecated pci-bus.yaml
schema.
Link: https://lore.kernel.org/linux-pci/20240413151617.35630-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
The binding reference common cdns-pcie-host.yaml, which already defines
msi-parent and has a reference to pci-bus.yaml schema. Drop redundant
pieces here to make it a bit smaller.
Link: https://lore.kernel.org/linux-pci/20240413151617.35630-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
This adds the missing num-viewport, phys and phy-name properties to the
schema. Based on driver code, num-viewport is required for the root
complex, phys are optional. Their number corresponds to the number of
lanes. The AM65x supports up to 2 lanes.
Link: https://lore.kernel.org/linux-pci/8032b018-c870-403a-9dd9-63440de1da07@siemens.com
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Zero qed_slowpath_params before use.
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20240515091101.18754-4-skashyap@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If stag work is already scheduled and unload is called, it can lead to
issues as unload cleans up the work element. Wait for stag work to get
completed before cleanup during unload.
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20240515091101.18754-3-skashyap@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Stag work can cause issues during unload and recovery, hence don't process
it.
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20240515091101.18754-2-skashyap@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Running syzkaller with the newly reintroduced signed integer overflow
sanitizer produces this report:
[ 65.194362] ------------[ cut here ]------------
[ 65.197752] UBSAN: signed-integer-overflow in ../drivers/scsi/sr_ioctl.c:436:9
[ 65.203607] -2147483648 * 177 cannot be represented in type 'int'
[ 65.207911] CPU: 2 PID: 10416 Comm: syz-executor.1 Not tainted 6.8.0-rc2-00035-gb3ef86b5a957 #1
[ 65.213585] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 65.219923] Call Trace:
[ 65.221556] <TASK>
[ 65.223029] dump_stack_lvl+0x93/0xd0
[ 65.225573] handle_overflow+0x171/0x1b0
[ 65.228219] sr_select_speed+0xeb/0xf0
[ 65.230786] ? __pm_runtime_resume+0xe6/0x130
[ 65.233606] sr_block_ioctl+0x15d/0x1d0
...
Historically, the signed integer overflow sanitizer did not work in the
kernel due to its interaction with `-fwrapv` but this has since been
changed [1] in the newest version of Clang. It was re-enabled in the kernel
with Commit 557f8c582a ("ubsan: Reintroduce signed overflow sanitizer").
Firstly, let's change the type of "speed" to unsigned long as
sr_select_speed()'s only caller passes in an unsigned long anyways.
$ git grep '\.select_speed'
| drivers/scsi/sr.c: .select_speed = sr_select_speed,
...
| static int cdrom_ioctl_select_speed(struct cdrom_device_info *cdi,
| unsigned long arg)
| {
| ...
| return cdi->ops->select_speed(cdi, arg);
| }
Next, let's add an extra check to make sure we don't exceed 0xffff/177
(350) since 0xffff is the max speed. This has two benefits: 1) we deal
with integer overflow before it happens and 2) we properly respect the
max speed of 0xffff. There are some "magic" numbers here but I did not
want to change more than what was necessary.
Link: https://github.com/llvm/llvm-project/pull/82432 [1]
Closes: https://github.com/KSPP/linux/issues/357
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240508-b4-b4-sio-sr_select_speed-v2-1-00b68f724290@google.com
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a host is configured with a few LUNs and I/O is running, injecting FC
faults repeatedly leads to path recovery problems. The LUNs have 4 paths
each and 3 of them come back active after say an FC fault which makes 2 of
the paths go down, instead of all 4. This happens after several iterations
of continuous FC faults.
Reason here is that we're returning an I/O error whenever we're
encountering sense code 06/04/0a (LOGICAL UNIT NOT ACCESSIBLE, ASYMMETRIC
ACCESS STATE TRANSITION) instead of retrying.
[mwilck: The original patch was developed by Rajashekhar M A and Hannes
Reinecke. I moved the code to alua_check_sense() as suggested by Mike
Christie [1]. Evan Milne had raised the question whether pg->state should
be set to transitioning in the UA case [2]. I believe that doing this is
correct. SCSI_ACCESS_STATE_TRANSITIONING by itself doesn't cause I/O
errors. Our handler schedules an RTPG, which will only result in an I/O
error condition if the transitioning timeout expires.]
[1] https://lore.kernel.org/all/0bc96e82-fdda-4187-148d-5b34f81d4942@oracle.com/
[2] https://lore.kernel.org/all/CAGtn9r=kicnTDE2o7Gt5Y=yoidHYD7tG8XdMHEBJTBraVEoOCw@mail.gmail.com/
Co-developed-by: Rajashekhar M A <rajs@netapp.com>
Co-developed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin Wilck <martin.wilck@suse.com>
Link: https://lore.kernel.org/r/20240514140344.19538-1-mwilck@suse.com
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When building for a 32-bit platform such as ARM or i386, for which size_t
is unsigned int, there is a warning due to using an unsigned long format
specifier:
drivers/scsi/mpi3mr/mpi3mr_transport.c:1370:11: error: format specifies type 'unsigned long' but the argument has type 'unsigned int' [-Werror,-Wformat]
1369 | ioc_warn(mrioc, "skipping port %u, max allowed value is %lu\n",
| ~~~
| %u
1370 | i, sizeof(mr_sas_port->phy_mask) * 8);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use the proper format specifier for size_t, %zu, to resolve the warning for
all platforms.
Fixes: 3668651def ("scsi: mpi3mr: Sanitise num_phys")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240514-mpi3mr-fix-wformat-v1-1-f1ad49217e5e@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After ther -u addition, most of the known users are setting it. And
it makes sense, as it adds more information, and inherits the default
setup for the threads - e.g., cgroups configs.
Thus, if the user-space interface is available, enable -u. Otherwise,
use the in-kernel thread.
Add the -k option to allow the user to request kernel-threads.
Link: https://lkml.kernel.org/r/9241d3089de4091b124f780ed832a0e6646cadaa.1713968967.git.bristot@kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
On many cases, the results right after the startup are different
from the rest of the execution, biasing the results. For example,
on osnoise, the scheduler might take some time to adapt to the new
busy-loop workload.
Add the --warm-up <seconds> option, adding a warm-up phase (in
seconds) where the workload is set, but the results are discarded.
Link: https://lkml.kernel.org/r/e682d5ce5af90f123bd13220f63d5c3d118a92be.1713968967.git.bristot@kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
While the per-cpu values are the results to take into consideration, the
overall system values are also useful.
Add a summary at the bottom of rtla timerlat top showing the overall
results. For instance:
Timer Latency
0 00:00:10 | IRQ Timer Latency (us) | Thread Timer Latency (us)
CPU COUNT | cur min avg max | cur min avg max
0 #10003 | 113 19 150 441 | 134 35 170 459
1 #10003 | 63 8 99 462 | 84 15 119 481
2 #10003 | 3 2 89 396 | 21 8 108 414
3 #10002 | 206 11 210 394 | 223 21 228 415
---------------|----------------------------------------|---------------------------------------
ALL #40011 e0 | 2 137 462 | 8 156 481
Link: https://lkml.kernel.org/r/5eb510d6faeb4ce745e09395196752df75a2dd1a.1713968967.git.bristot@kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Suggested-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
