mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/
synced 2026-11-10 20:48:12 +00:00
1,189,500 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Nick Alcock
|
679532c2f6 |
mfd: bcm2835-pm: Remove MODULE_LICENSE in non-modules
Since commit
|
||
Aidan MacDonald
|
c8bce48225 |
mfd: qcom-pm8008: Remove workaround for a regmap-irq quirk
Remove pm8008_init(), which according to the comments exists only as a workaround for regmap-irq's odd treatment of type registers. This workaround shouldn't be needed anymore because this driver uses config registers, which are always programmed by regmap-irq no matter what the initial register state is. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230216222214.138671-5-aidanmacdonald.0x0@gmail.com |
||
|
Aidan MacDonald
|
ba97b5a505 |
mfd: qcom-pm8008: Use .get_irq_reg() for irq chip
Replace the deprecated not_fixed_stride flag and the associated hierarchy of offsets with a .get_irq_reg() callback. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230216222214.138671-4-aidanmacdonald.0x0@gmail.com |
||
|
Aidan MacDonald
|
fd0a2afa5a |
mfd: qcom-pm8008: Convert irq chip to config regs
Replace type and virtual registers, which are both deprecated, with config registers. This also simplifies the driver because IRQ types are set in one place, the set_type_config() callback. Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com> [Lee: Squashed in fix-up patch from Stephen Rothwell adapting to new .set_type_config() API] Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230216222214.138671-3-aidanmacdonald.0x0@gmail.com |
||
|
Aidan MacDonald
|
172a293707 |
mfd: qcom-pm8008: Fix swapped mask/unmask in irq chip
The usual behavior of mask registers is writing a '1' bit to
disable (mask) an interrupt; similarly, writing a '1' bit to
an unmask register enables (unmasks) an interrupt.
Due to a longstanding issue in regmap-irq, mask and unmask
registers were inverted when both kinds of registers were
present on the same chip, ie. regmap-irq actually wrote '1's
to the mask register to enable an IRQ and '1's to the unmask
register to disable an IRQ.
This was fixed by commit
|
||
Poovendhan Selvaraj
|
c301311a52 |
dt-bindings: mfd: Add the tcsr compatible for IPQ9574
Add the tcsr compatible string for IPQ9574 SoC Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230208053332.16537-6-quic_poovendh@quicinc.com |
||
Christophe JAILLET
|
86c6bb0edf |
mfd: core: Reorder fields in 'struct mfd_cell' to save some memory
Group some variables based on their sizes to reduce hole and avoid padding. On x86_64, this shrinks the size from 144 to 128 bytes. As an example: $ size drivers/mfd/as3722.o (Before) text data bss dec hex filename 9441 680 16 10137 2799 drivers/mfd/as3722.o $ size drivers/mfd/as3722.o (After) text data bss dec hex filename 9345 680 16 10041 2739 drivers/mfd/as3722.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/bb631974888dfe1af593b6280cf30fb913d2d1a4.1676365116.git.christophe.jaillet@wanadoo.fr |
||
Konrad Dybcio
|
b09ed62f2d |
dt-bindings: mfd: qcom,spmi-pmic: Allow RRADC as adc@ subnode
This was omitted when adding the RRADC bindings.
Fixes:
|
||
Ye Xingchen
|
2e9de58c65 |
mfd: qcom_rpm: Use devm_platform_get_and_ioremap_resource()
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/202302081734511884545@zte.com.cn |
||
|
Ye Xingchen
|
ccb92c4d16 |
mfd: atmel-flexcom: Use devm_platform_get_and_ioremap_resource()
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/202302081731593374472@zte.com.cn |
||
|
Ye Xingchen
|
4723d2ef53 |
mfd: sun4i-gpadc: Use devm_platform_get_and_ioremap_resource()
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/202302081736500534579@zte.com.cn |
||
|
Ye Xingchen
|
0479ed2cf7 |
mfd: ssbi: Use devm_platform_get_and_ioremap_resource()
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/202302081735440864562@zte.com.cn |
||
|
Ye Xingchen
|
4239bff345 |
mfd: ipaq-micro: Use devm_platform_get_and_ioremap_resource()
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/202302081733542304522@zte.com.cn |
||
|
Ye Xingchen
|
74d3de876a |
mfd: hi6421-pmic: Use devm_platform_get_and_ioremap_resource()
Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/202302081733017704501@zte.com.cn |
||
Jackie Liu
|
d16fc68587 |
mfd: si476x-cmd: Fix several issues reported by codespell
Fix some typo, find by 'codespell drivers/mfd/si476x-cmd.c' succsess -> success interace -> interface comand -> command failre -> failure Reported-by: k2ci <kernel-bot@kylinos.cn> Signed-off-by: Jackie Liu <liuyun01@kylinos.cn> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230206032231.3208296-1-liu.yun@linux.dev |
||
Hans de Goede
|
ded99b89d2 |
mfd: intel_soc_pmic_chtwc: Add Lenovo Yoga Book X90F to intel_cht_wc_models
The Android Lenovo Yoga Book X90F / X90L uses the same charger / fuelgauge setup as the already supported Windows Lenovo Yoga Book X91F/L, add a DMI match for this to intel_cht_wc_models with driver_data set to INTEL_CHT_WC_LENOVO_YOGABOOK1. When the quirk for the X91F/L was initially added it was written to also apply to the X90F/L but this does not work because the Android version of the Yoga Book uses completely different DMI strings. Also adjust the X91F/L quirk to reflect that it only applies to the X91F/L models. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230301095402.28582-1-hdegoede@redhat.com |
||
David Virag
|
a3165abaa9 |
rtc: s5m: Drop S5M8763 support
The S5M8763 MFD has no device tree compatible, and since board file support for it was removed, there's no way to use this MFD. After removing the remaining code for it from the MFD driver, also remove support for it in the s5m RTC driver, and all remaining references to it. Signed-off-by: David Virag <virag.david003@gmail.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230131183008.4451-3-virag.david003@gmail.com |
||
|
David Virag
|
f736d2c0ca |
mfd: sec: Remove PMICs without compatibles
The S5M8751 and S5M8763 PMIC chips have no corresponding compatible values, so since board file support was removed for this driver, there is no way to specify these PMICs as present in boards anymore. Remove leftovers of these chips since it's dead code. Signed-off-by: David Virag <virag.david003@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/20230131183008.4451-2-virag.david003@gmail.com |
||
Paolo Abeni
|
9b78d91963 |
net: phy: hide the PHYLIB_LEDS knob
commit
|
||
Thomas Gleixner
|
7e0664b660 |
- Fix error returned for shared timers on Exynos MCT timers (Krzysztof Kozlowski)
- Code reorg by splitting the CPUXGPT timer code (AngeloGioacchino Del Regno) - Remove the unused mxc_timer_init() function on i.MX (Fabio Estevam) - Replace of_get_address() and of_translate_address() calls with single call to of_address_to_resource() on TI timer (Rob Herring) - Mark driver as non-removable and remove useless remove() callback on SH MTU2 and STM32 LP timers. Improve the error message in the remove callback of the TI DM timer (Uwe Kleine-König) - Convert to platform remove callback returning void on Tegra186, TI DM timers (Uwe Kleine-König) - Drop pointless of_match_ptr for ID table in the STM32 LP timer (Krzysztof Kozlowski) - Fix memory leak in davinci_timer_register when init fails on DaVinci (Qinrun Dai) - Fix finding alwon timer regression on Timer TI DM (Tony Lindgren) - Use of_property_read_bool() for boolean properties on TI timer (Rob Herring) - Drop superfluous rk3288 compatible and add rk3588 compatible DT bindings (Cristian Ciocaltea) -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmRHvBsACgkQqDIjiipP 6E/2Qwf9FYsaw7ouM+keG+luxJzzKF9AJWUC0Y13DPR9tfDEGlPZpmSHKO8p2Nf7 JmVN7H5EgNgQyCeOc4u9X7OL+2Q/CNRLUlE/PFXFJpZoYscf+5YiT6AVfwkXJVZ5 sLA4f3UYORPnjQrW8UBtmHCGtNl3wJdRrLx4Wc3n2mop7iW47vp+M66/BqgWfE3D +YKJiiBIsPFNv/8JrlQXBfkfZjxUq7CM0RpMZdAfoerzCQcNMx6XyXlXjdlEh9ZJ BjePBv5bwOtKH4ZYK0mbEGkz5g6FlX4/RmKULkm8I5gf703h+UmJlBu96JDYQ7iD /EU9Fp9sC7nQQvPdX7QK+/99N9enNQ== =i5sA -----END PGP SIGNATURE----- Merge tag 'timers-v6.4-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clocksource and clockevent updates from Daniel Lezcano: - Fix error returned for shared timers on Exynos MCT timers (Krzysztof Kozlowski) - Code reorg by splitting the CPUXGPT timer code (AngeloGioacchino Del Regno) - Remove the unused mxc_timer_init() function on i.MX (Fabio Estevam) - Replace of_get_address() and of_translate_address() calls with single call to of_address_to_resource() on TI timer (Rob Herring) - Mark driver as non-removable and remove useless remove() callback on SH MTU2 and STM32 LP timers. Improve the error message in the remove callback of the TI DM timer (Uwe Kleine-König) - Convert to platform remove callback returning void on Tegra186, TI DM timers (Uwe Kleine-König) - Drop pointless of_match_ptr for ID table in the STM32 LP timer (Krzysztof Kozlowski) - Fix memory leak in davinci_timer_register when init fails on DaVinci (Qinrun Dai) - Fix finding alwon timer regression on Timer TI DM (Tony Lindgren) - Use of_property_read_bool() for boolean properties on TI timer (Rob Herring) - Drop superfluous rk3288 compatible and add rk3588 compatible DT bindings (Cristian Ciocaltea) Link: htttps://lore.kernel.org/lkml/d30fd923-e6e5-a1a6-ca76-1b39f8fad6c9@linaro.org |
||
Krzysztof Kozlowski
|
2afa82d1fc |
dt-bindings: thermal: qcom-tsens: Correct unit address
Match unit-address to first reg entry. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Acked-by: Amit Kucheria <amitk@kernel.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230420072429.36255-1-krzysztof.kozlowski@linaro.org |
||
Rob Herring
|
f0fb67c271 |
thermal/drivers/mediatek: Use of_address_to_resource()
Replace of_get_address() and of_translate_address() calls with single call to of_address_to_resource(). Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230319163231.226738-1-robh@kernel.org |
||
Kang Chen
|
a3e9a9a597 |
thermal/drivers/mediatek: Change clk_prepare_enable to devm_clk_get_enabled in mtk_thermal_probe
Use devm_clk_get_enabled to do automatic resource management. Meanwhile, remove error handling labels in the probe function and the whole remove function. Signed-off-by: Kang Chen <void0red@hust.edu.cn> Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230419020749.621257-2-void0red@hust.edu.cn |
||
|
Kang Chen
|
f05c7b7d9e |
thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe
Smatch reports:
1. mtk_thermal_probe() warn: 'apmixed_base' from of_iomap() not released.
2. mtk_thermal_probe() warn: 'auxadc_base' from of_iomap() not released.
The original code forgets to release iomap resource when handling errors,
fix it by switch to devm_of_iomap.
Fixes:
|
||
AngeloGioacchino Del Regno
|
47cbb0467b |
thermal/drivers/mediatek: Add temperature constraints to validate read
The AUXADC thermal v1 allows reading temperature range between -20°C to
150°C and any value out of this range is invalid.
Add new definitions for MT8173_TEMP_{MIN_MAX} and a new small helper
mtk_thermal_temp_is_valid() to check if new readings are in range: if
not, we tell to the API that the reading is invalid by returning
THERMAL_TEMP_INVALID.
It was chosen to introduce the helper function because, even though this
temperature range is realistically ok for all, it comes from a downstream
kernel driver for version 1, but here we also support v2 and v3 which may
may have wider constraints.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20230419061146.22246-3-angelogioacchino.delregno@collabora.com
|
||
|
AngeloGioacchino Del Regno
|
0a677eea71 |
Revert "thermal/drivers/mediatek: Add delay after thermal banks initialization"
Some more testing revealed that this commit introduces a regression on some MT8173 Chromebooks and at least on one MT6795 Sony Xperia M5 smartphone due to the delay being apparently variable and machine specific. Another solution would be to delay for a bit more (~70ms) but this is not feasible for two reasons: first of all, we're adding an even bigger delay in a probe function; second, some machines need less, some may need even more, making the msleep at probe solution highly suboptimal. This reverts commit |
||
Chenggang Wang
|
2912d34180 |
thermal/drivers/cpuidle_cooling: Delete unmatched comments
The function no longer returns a value, synchronize the comments. Signed-off-by: wangchenggang@vivo.com Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/1681789108-28130-1-git-send-email-wangchenggang@vivo.com |
||
Marijn Suijten
|
d9f7eeaf24 |
dt-bindings: thermal: Use generic ADC node name in examples
Update the examples to reflect a future requirement for the generic `channel` node name on ADC channel nodes, while conveying the board name of the channel in a label instead. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230410202917.247666-4-marijn.suijten@somainline.org |
||
Stefan Wahren
|
a8a2330753 |
dt-bindings: imx-thermal: Add imx6sll and imx6ul compatible
Currently the dtbs_check for imx6 generates warnings like this: ['fsl,imx6sll-tempmon', 'fsl,imx6sx-tempmon'] is too long So add them to the devicetree binding. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230410205803.45853-4-stefan.wahren@i2se.com |
||
|
Paolo Abeni
|
c248b27cfc |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
No conflicts. Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
Neeraj Upadhyay
|
4e8f6e44bc |
arm64: Fix label placement in record_mmu_state()
Fix label so that pre_disable_mmu_workaround() is called
before clearing sctlr_el1.M.
Fixes:
|
||
Nicholas Piggin
|
169f899796 |
powerpc/64s: Disable pcrel code model on Clang
Clang has a bug that casues the pcrel code model not to be used when any of
-msoft-float, -mno-altivec, or -mno-vsx are set. Leaving these off causes
FP/vector instructions to be generated, causing crashes. So disable pcrel
for clang for now.
Fixes:
|
||
|
Nicholas Piggin
|
0c993300d5 |
powerpc: Fix merge conflict between pcrel and copy_thread changes
Fix a conflict between commit |
||
Evan Green
|
bb3f89487f |
RISC-V: hwprobe: Remove __init on probe_vendor_features()
probe_vendor_features() is now called from smp_callin(), which is not
__init code and runs during cpu hotplug events. Remove the
__init_or_module decoration from it and the functions it calls to avoid
walking into outer space.
Fixes:
|
||
Huacai Chen
|
3b5a5672b3 |
Merge 'irq/loongarch-fixes-6.4' into loongarch-next
LoongArch architecture changes for 6.4 depend on the irq changes to work on "dual-bridge" systems, so merge them to create a base. |
||
Linus Torvalds
|
0cfd8703e7 |
Power management updates for 6.4-rc1
- Fix the frequency unit in cpufreq_verify_current_freq checks()
(Sanjay Chandrashekara).
- Make mode_state_machine in amd-pstate static (Tom Rix).
- Make the cpufreq core require drivers with target_index() to set
freq_table (Viresh Kumar).
- Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang).
- Use of_property_read_bool() for boolean properties in the pmac32
cpufreq driver (Rob Herring).
- Make the cpufreq sysfs interface return proper error codes on
obviously invalid input (qinyu).
- Add guided autonomous mode support to the AMD P-state driver (Wyes
Karny).
- Make the Intel P-state driver enable HWP IO boost on all server
platforms (Srinivas Pandruvada).
- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Remove MODULE_LICENSE in non-modules (Nick Alcock).
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss).
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson).
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski).
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno).
- Use of_property_present() for testing DT property presence in the
cpuidle code (Rob Herring).
- Drop unnecessary (void *) conversions from the PM core (Li zeming).
- Add sysfs files to represent time spent in a platform sleep state
during suspend-to-idle and make AMD and Intel PMC drivers use them
(Mario Limonciello).
- Use of_property_present() for testing DT property presence (Rob
Herring).
- Add set_required_opps() callback to the 'struct opp_table', to make
the code paths cleaner (Viresh Kumar).
- Update the pm-graph siute of utilities to v5.11 with the following
changes:
* New script which allows users to install the latest pm-graph
from the upstream github repo.
* Update all the dmesg suspend/resume PM print formats to be able to
process recent timelines using dmesg only.
* Add ethtool output to the log for the system's ethernet device if
ethtool exists.
* Make the tool more robustly handle events where mangled dmesg or
ftrace outputs do not include all the requisite data.
- Make the sleepgraph utility recognize "CPU killed" messages (Xueqin
Luo).
- Remove unneeded SRCU selection in Kconfig because it's always set
from devfreq core (Paul E. McKenney).
- Drop of_match_ptr() macro from exynos-bus.c because this driver is
always using the DT table for driver probe (Krzysztof Kozlowski).
- Use the preferred of_property_present() instead of the low-level
of_get_property() on exynos-bus.c (Rob Herring).
- Use devm_platform_get_and_ioream_resource() in exyno-ppmu.c (Yang Li).
-----BEGIN PGP SIGNATURE-----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=p/5G
-----END PGP SIGNATURE-----
Merge tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update several cpufreq drivers and the cpufreq core, add sysfs
interface for exposing the time really spent in the platform low-power
state during suspend-to-idle, update devfreq (core and drivers) and
the pm-graph suite of tools and clean up code.
Specifics:
- Fix the frequency unit in cpufreq_verify_current_freq checks()
Sanjay Chandrashekara)
- Make mode_state_machine in amd-pstate static (Tom Rix)
- Make the cpufreq core require drivers with target_index() to set
freq_table (Viresh Kumar)
- Fix typo in the ARM_BRCMSTB_AVS_CPUFREQ Kconfig entry (Jingyu Wang)
- Use of_property_read_bool() for boolean properties in the pmac32
cpufreq driver (Rob Herring)
- Make the cpufreq sysfs interface return proper error codes on
obviously invalid input (qinyu)
- Add guided autonomous mode support to the AMD P-state driver (Wyes
Karny)
- Make the Intel P-state driver enable HWP IO boost on all server
platforms (Srinivas Pandruvada)
- Add opp and bandwidth support to tegra194 cpufreq driver (Sumit
Gupta)
- Use of_property_present() for testing DT property presence (Rob
Herring)
- Remove MODULE_LICENSE in non-modules (Nick Alcock)
- Add SM7225 to cpufreq-dt-platdev blocklist (Luca Weiss)
- Optimizations and fixes for qcom-cpufreq-hw driver (Krzysztof
Kozlowski, Konrad Dybcio, and Bjorn Andersson)
- DT binding updates for qcom-cpufreq-hw driver (Konrad Dybcio and
Bartosz Golaszewski)
- Updates and fixes for mediatek driver (Jia-Wei Chang and
AngeloGioacchino Del Regno)
- Use of_property_present() for testing DT property presence in the
cpuidle code (Rob Herring)
- Drop unnecessary (void *) conversions from the PM core (Li zeming)
- Add sysfs files to represent time spent in a platform sleep state
during suspend-to-idle and make AMD and Intel PMC drivers use them
Mario Limonciello)
- Use of_property_present() for testing DT property presence (Rob
Herring)
- Add set_required_opps() callback to the 'struct opp_table', to make
the code paths cleaner (Viresh Kumar)
- Update the pm-graph siute of utilities to v5.11 with the following
changes:
* New script which allows users to install the latest pm-graph
from the upstream github repo.
* Update all the dmesg suspend/resume PM print formats to be able
to process recent timelines using dmesg only.
* Add ethtool output to the log for the system's ethernet device
if ethtool exists.
* Make the tool more robustly handle events where mangled dmesg
or ftrace outputs do not include all the requisite data.
- Make the sleepgraph utility recognize "CPU killed" messages (Xueqin
Luo)
- Remove unneeded SRCU selection in Kconfig because it's always set
from devfreq core (Paul E. McKenney)
- Drop of_match_ptr() macro from exynos-bus.c because this driver is
always using the DT table for driver probe (Krzysztof Kozlowski)
- Use the preferred of_property_present() instead of the low-level
of_get_property() on exynos-bus.c (Rob Herring)
- Use devm_platform_get_and_ioream_resource() in exyno-ppmu.c (Yang
Li)"
* tag 'pm-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (44 commits)
platform/x86/intel/pmc: core: Report duration of time in HW sleep state
platform/x86/intel/pmc: core: Always capture counters on suspend
platform/x86/amd: pmc: Report duration of time in hw sleep state
PM: Add sysfs files to represent time spent in hardware sleep state
cpufreq: use correct unit when verify cur freq
cpufreq: tegra194: add OPP support and set bandwidth
cpufreq: amd-pstate: Make varaiable mode_state_machine static
PM: core: Remove unnecessary (void *) conversions
cpufreq: drivers with target_index() must set freq_table
PM / devfreq: exynos-ppmu: Use devm_platform_get_and_ioremap_resource()
OPP: Move required opps configuration to specialized callback
OPP: Handle all genpd cases together in _set_required_opps()
cpufreq: qcom-cpufreq-hw: Revert adding cpufreq qos
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QCM2290
dt-bindings: cpufreq: cpufreq-qcom-hw: Sanitize data per compatible
dt-bindings: cpufreq: cpufreq-qcom-hw: Allow just 1 frequency domain
cpufreq: Add SM7225 to cpufreq-dt-platdev blocklist
cpufreq: qcom-cpufreq-hw: fix double IO unmap and resource release on exit
cpufreq: mediatek: Raise proc and sram max voltage for MT7622/7623
cpufreq: mediatek: raise proc/sram max voltage for MT8516
...
|
||
|
Linus Torvalds
|
793582ff47 |
ACPI updates for 6.4-rc1
- Update the ACPICA code in the kernel to upstream revision 20230331
including the following changes:
* Delete bogus node_array array of pointers from AEST table (Jessica
Clarke).
* Add support for trace buffer extension in GICC to the ACPI MADT
parser (Xiongfeng Wang).
* Add missing macro ACPI_FUNCTION_TRACE() for acpi_ns_repair_HID()
(Xiongfeng Wang).
* Add missing tables to astable (Pedro Falcato).
* Add support for 64 bit loong_arch compilation to ACPICA (Huacai
Chen).
* Add support for ASPT table in disassembler to ACPICA (Jeremi
Piotrowski).
* Add support for Arm's MPAM ACPI table version 2 (Hesham Almatary).
* Update all copyrights/signons in ACPICA to 2023 (Bob Moore).
* Add support for ClockInput resource (v6.5) (Niyas Sait).
* Add RISC-V INTC interrupt controller definition to the list of
supported interrupt controllers for MADT (Sunil V L).
* Add structure definitions for the RISC-V RHCT ACPI table (Sunil V L).
* Address several cases in which the ACPICA code might lead to
undefined behavior (Tamir Duberstein).
* Make ACPICA code support flexible arrays properly (Kees Cook).
* Check null return of ACPI_ALLOCATE_ZEROED in
acpi_db_display_objects() (void0red).
* Add os specific support for Zephyr RTOS to ACPICA (Najumon).
* Update version to 20230331 (Bob Moore).
- Fix evaluating the _PDC ACPI control method when running as Xen
dom0 (Roger Pau Monne).
- Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu).
- Check for null return of devm_kzalloc() in fch_misc_setup() (Kang
Chen).
- Log a message if enable_irq_wake() fails for the ACPI SCI (Simon
Gaiser).
- Initialize the correct IOMMU fwspec while parsing ACPI VIOT
(Jean-Philippe Brucker).
- Amend indentation and prefix error messages with FW_BUG in the ACPI
SPCR parsing code (Andy Shevchenko).
- Enable ACPI sysfs support for CCEL records (Kuppuswamy
Sathyanarayanan).
- Make the APEI error injection code warn on invalid arguments when
explicitly indicated by platform (Shuai Xue).
- Add CXL error types to the error injection code in APEI (Tony Luck).
- Refactor acpi_data_prop_read_single() (Andy Shevchenko).
- Fix two issues in the ACPI SBS driver (Armin Wolf).
- Replace ternary operator with min_t() in the generic ACPI thermal
zone driver (Jiangshan Yi).
- Ensure that ACPI notify handlers are not running after removal and
clean up code in acpi_sb_notify() (Rafael Wysocki).
- Remove register_backlight_delay module option and code and remove
quirks for false-positive backlight control support advertised on
desktop boards (Hans de Goede).
- Replace irqdomain.h include with struct declarations in ACPI headers
and update several pieces of code previously including of.h
implicitly through those headers (Rob Herring).
- Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K).
- Update the pm_profile sysfs attribute documentation (Rafael Wysocki).
- Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to
the ACPI driver for Intel SoCs (Hans de Goede).
-----BEGIN PGP SIGNATURE-----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=O61K
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20230331, fix the ACPI SBS driver and the evaluation of the _PDC
method on Xen dom0 in the ACPI processor driver, update the ACPI
driver for Intel SoCs and clean up code in multiple places.
Specifics:
- Update the ACPICA code in the kernel to upstream revision 20230331
including the following changes:
* Delete bogus node_array array of pointers from AEST table
(Jessica Clarke)
* Add support for trace buffer extension in GICC to the ACPI MADT
parser (Xiongfeng Wang)
* Add missing macro ACPI_FUNCTION_TRACE() for
acpi_ns_repair_HID() (Xiongfeng Wang)
* Add missing tables to astable (Pedro Falcato)
* Add support for 64 bit loong_arch compilation to ACPICA (Huacai
Chen)
* Add support for ASPT table in disassembler to ACPICA (Jeremi
Piotrowski)
* Add support for Arm's MPAM ACPI table version 2 (Hesham
Almatary)
* Update all copyrights/signons in ACPICA to 2023 (Bob Moore)
* Add support for ClockInput resource (v6.5) (Niyas Sait)
* Add RISC-V INTC interrupt controller definition to the list of
supported interrupt controllers for MADT (Sunil V L)
* Add structure definitions for the RISC-V RHCT ACPI table (Sunil
V L)
* Address several cases in which the ACPICA code might lead to
undefined behavior (Tamir Duberstein)
* Make ACPICA code support flexible arrays properly (Kees Cook)
* Check null return of ACPI_ALLOCATE_ZEROED in
acpi_db_display_objects() (void0red)
* Add os specific support for Zephyr RTOS to ACPICA (Najumon)
* Update version to 20230331 (Bob Moore)
- Fix evaluating the _PDC ACPI control method when running as Xen
dom0 (Roger Pau Monne)
- Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu)
- Check for null return of devm_kzalloc() in fch_misc_setup() (Kang
Chen)
- Log a message if enable_irq_wake() fails for the ACPI SCI (Simon
Gaiser)
- Initialize the correct IOMMU fwspec while parsing ACPI VIOT
(Jean-Philippe Brucker)
- Amend indentation and prefix error messages with FW_BUG in the ACPI
SPCR parsing code (Andy Shevchenko)
- Enable ACPI sysfs support for CCEL records (Kuppuswamy
Sathyanarayanan)
- Make the APEI error injection code warn on invalid arguments when
explicitly indicated by platform (Shuai Xue)
- Add CXL error types to the error injection code in APEI (Tony Luck)
- Refactor acpi_data_prop_read_single() (Andy Shevchenko)
- Fix two issues in the ACPI SBS driver (Armin Wolf)
- Replace ternary operator with min_t() in the generic ACPI thermal
zone driver (Jiangshan Yi)
- Ensure that ACPI notify handlers are not running after removal and
clean up code in acpi_sb_notify() (Rafael Wysocki)
- Remove register_backlight_delay module option and code and remove
quirks for false-positive backlight control support advertised on
desktop boards (Hans de Goede)
- Replace irqdomain.h include with struct declarations in ACPI
headers and update several pieces of code previously including of.h
implicitly through those headers (Rob Herring)
- Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K)
- Update the pm_profile sysfs attribute documentation (Rafael
Wysocki)
- Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to
the ACPI driver for Intel SoCs (Hans de Goede)"
* tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits)
ACPI: LPSS: Add 80862289 ACPI _HID for second PWM controller on Cherry Trail
ACPI: bus: Ensure that notify handlers are not running after removal
ACPI: bus: Add missing braces to acpi_sb_notify()
ACPI: video: Remove desktops without backlight DMI quirks
ACPI: video: Remove register_backlight_delay module option and code
ACPI: Replace irqdomain.h include with struct declarations
fpga: lattice-sysconfig-spi: Add explicit include for of.h
tpm: atmel: Add explicit include for of.h
virtio-mmio: Add explicit include for of.h
pata: ixp4xx: Add explicit include for of.h
ata: pata_macio: Add explicit include of irqdomain.h
serial: 8250_tegra: Add explicit include for of.h
net: rfkill-gpio: Add explicit include for of.h
staging: iio: resolver: ad2s1210: Add explicit include for of.h
iio: adc: ad7292: Add explicit include for of.h
ACPICA: Update version to 20230331
ACPICA: add os specific support for Zephyr RTOS
ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects
ACPICA: acpi_resource_irq: Replace 1-element arrays with flexible array
ACPICA: acpi_madt_oem_data: Fix flexible array member definition
...
|
||
|
Linus Torvalds
|
5e0ca0bfc3 |
Thermal control updates for 6.4-rc1
- Add a thermal zone 'devdata' accessor and modify several drivers to
use it (Daniel Lezcano).
- Prevent drivers from using the 'device' internal thermal zone
structure field directly (Daniel Lezcano).
- Clean up the hwmon thermal driver (Daniel Lezcano).
- Add thermal zone id accessor and thermal zone type accessor
and prevent drivers from using thermal zone fields directly (Daniel
Lezcano).
- Clean up the acerhdf and tegra thermal drivers (Daniel Lezcano).
- Add lower bound check for sysfs input to the x86_pkg_temp_thermal
Intel thermal driver (Zhang Rui).
- Add more thermal zone device encapsulation: prevent setting structure
field directly, access the sensor device instead the thermal zone's
device for trace, relocate the traces in drivers/thermal (Daniel
Lezcano).
- Use the generic trip point for the i.MX and remove the get_trip_temp
ops (Daniel Lezcano).
- Use the devm_platform_ioremap_resource() in the Hisilicon driver
(Yang Li).
- Remove R-Car H3 ES1.* handling as public has only access to the ES2
version and the upstream support for the ES1 has been shutdown (Wolfram
Sang).
- Add a delay after initializing the bank in order to let the time to
the hardware to initialze itself before reading the temperature
(Amjad Ouled-Ameur).
- Add MT8365 support (Amjad Ouled-Ameur).
- Preparational cleanup and DT bindings for RK3588 support (Sebastian
Reichel).
- Add driver support for RK3588 (Finley Xiao).
- Use devm_reset_control_array_get_exclusive() for the Rockchip driver
(Ye Xingchen).
- Detect power gated thermal zones and return -EAGAIN when reading the
temperature (Mikko Perttunen).
- Remove thermal_bind_params structure as it is unused (Zhang Rui)
- Drop unneeded quotes in DT bindings allowing to run yamllint (Rob
Herring).
- Update the power allocator documentation according to the thermal
trace relocation (Lukas Bulwahn).
- Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor
(Chen-Yu Tsai).
- Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen).
- Add AP domain support to LVTS thermal controllers for mt8195
(Balsam CHIHI).
- Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano).
- Make thermal_of_zone_[un]register() private to the thermal OF code
(Daniel Lezcano).
- Create a private copy of the thermal zone device parameters
structure when registering a thermal zone (Daniel Lezcano).
- Fix a kernel NULL pointer dereference in thermal_hwmon (Zhang Rui).
- Revert recent message adjustment in thermal_hwmon (Rafael Wysocki).
- Use of_property_present() for testing DT property presence in
thermal control code (Rob Herring).
- Clean up thermal_list_lock locking in the thermal core (Rafael
Wysocki).
- Add DLVR support for RFIM control in the int340x Intel thermal
driver (Srinivas Pandruvada).
-----BEGIN PGP SIGNATURE-----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=XNJE
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These mostly continue to prepare the thermal control subsystem for
using unified representation of trip points, which includes cleanups,
code refactoring and similar and update several drivers (for other
reasons), which includes new hardware support.
Specifics:
- Add a thermal zone 'devdata' accessor and modify several drivers to
use it (Daniel Lezcano)
- Prevent drivers from using the 'device' internal thermal zone
structure field directly (Daniel Lezcano)
- Clean up the hwmon thermal driver (Daniel Lezcano)
- Add thermal zone id accessor and thermal zone type accessor and
prevent drivers from using thermal zone fields directly (Daniel
Lezcano)
- Clean up the acerhdf and tegra thermal drivers (Daniel Lezcano)
- Add lower bound check for sysfs input to the x86_pkg_temp_thermal
Intel thermal driver (Zhang Rui)
- Add more thermal zone device encapsulation: prevent setting
structure field directly, access the sensor device instead the
thermal zone's device for trace, relocate the traces in
drivers/thermal (Daniel Lezcano)
- Use the generic trip point for the i.MX and remove the
get_trip_temp ops (Daniel Lezcano)
- Use the devm_platform_ioremap_resource() in the Hisilicon driver
(Yang Li)
- Remove R-Car H3 ES1.* handling as public has only access to the ES2
version and the upstream support for the ES1 has been shutdown
(Wolfram Sang)
- Add a delay after initializing the bank in order to let the time to
the hardware to initialze itself before reading the temperature
(Amjad Ouled-Ameur)
- Add MT8365 support (Amjad Ouled-Ameur)
- Preparational cleanup and DT bindings for RK3588 support (Sebastian
Reichel)
- Add driver support for RK3588 (Finley Xiao)
- Use devm_reset_control_array_get_exclusive() for the Rockchip
driver (Ye Xingchen)
- Detect power gated thermal zones and return -EAGAIN when reading
the temperature (Mikko Perttunen)
- Remove thermal_bind_params structure as it is unused (Zhang Rui)
- Drop unneeded quotes in DT bindings allowing to run yamllint (Rob
Herring)
- Update the power allocator documentation according to the thermal
trace relocation (Lukas Bulwahn)
- Fix sensor 1 interrupt status bitmask for the Mediatek LVTS sensor
(Chen-Yu Tsai)
- Use the dev_err_probe() helper in the Amlogic driver (Ye Xingchen)
- Add AP domain support to LVTS thermal controllers for mt8195
(Balsam CHIHI)
- Remove buggy call to thermal_of_zone_unregister() (Daniel Lezcano)
- Make thermal_of_zone_[un]register() private to the thermal OF code
(Daniel Lezcano)
- Create a private copy of the thermal zone device parameters
structure when registering a thermal zone (Daniel Lezcano)
- Fix a kernel NULL pointer dereference in thermal_hwmon (Zhang Rui)
- Revert recent message adjustment in thermal_hwmon (Rafael Wysocki)
- Use of_property_present() for testing DT property presence in
thermal control code (Rob Herring)
- Clean up thermal_list_lock locking in the thermal core (Rafael
Wysocki)
- Add DLVR support for RFIM control in the int340x Intel thermal
driver (Srinivas Pandruvada)"
* tag 'thermal-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
thermal: intel: int340x: Add DLVR support for RFIM control
thermal/core: Alloc-copy-free the thermal zone parameters structure
thermal/of: Unexport unused OF functions
thermal/drivers/bcm2835: Remove buggy call to thermal_of_zone_unregister
thermal/drivers/mediatek/lvts_thermal: Add AP domain for mt8195
dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal controllers for mt8195
thermal: amlogic: Use dev_err_probe()
thermal/drivers/mediatek/lvts_thermal: Fix sensor 1 interrupt status bitmask
MAINTAINERS: adjust entry in THERMAL/POWER_ALLOCATOR after header movement
dt-bindings: thermal: Drop unneeded quotes
thermal/core: Remove thermal_bind_params structure
thermal/drivers/tegra-bpmp: Handle offline zones
thermal/drivers/rockchip: use devm_reset_control_array_get_exclusive()
dt-bindings: rockchip-thermal: Support the RK3588 SoC compatible
thermal/drivers/rockchip: Support RK3588 SoC in the thermal driver
thermal/drivers/rockchip: Support dynamic sized sensor array
thermal/drivers/rockchip: Simplify channel id logic
thermal/drivers/rockchip: Use dev_err_probe
thermal/drivers/rockchip: Simplify clock logic
thermal/drivers/rockchip: Simplify getting match data
...
|
||
Hao Zeng
|
fa359d0685 |
recordmcount: Fix memory leaks in the uwrite function
Common realloc mistake: 'file_append' nulled but not freed upon failure Link: https://lkml.kernel.org/r/20230426010527.703093-1-zenghao@kylinos.cn Signed-off-by: Hao Zeng <zenghao@kylinos.cn> Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Beau Belgrave
|
41d8fba193 |
tracing/user_events: Limit max fault-in attempts
When event enablement changes, user_events attempts to update a bit in the user process. If a fault is hit, an attempt to fault-in the page and the write is retried if the page made it in. While this normally requires a couple attempts, it is possible a bad user process could attempt to cause infinite loops. Ensure fault-in attempts either sync or async are limited to a max of 10 attempts for each update. When the max is hit, return -EFAULT so another attempt is not made in all cases. Link: https://lkml.kernel.org/r/20230425225107.8525-5-beaub@linux.microsoft.com Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Beau Belgrave
|
97bbce89bf |
tracing/user_events: Prevent same address and bit per process
User processes register an address and bit pair for events. If the same address and bit pair are registered multiple times in the same process, it can cause undefined behavior when events are enabled/disabled. When more than one are used, the bit could be turned off by another event being disabled, while the original event is still enabled. Prevent undefined behavior by checking the current mm to see if any event has already been registered for the address and bit pair. Return EADDRINUSE back to the user process if it's already being used. Update ftrace self-test to ensure this occurs properly. Link: https://lkml.kernel.org/r/20230425225107.8525-4-beaub@linux.microsoft.com Suggested-by: Doug Cook <dcook@linux.microsoft.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Beau Belgrave
|
17b439db21 |
tracing/user_events: Ensure bit is cleared on unregister
If an event is enabled and a user process unregisters user_events, the bit is left set. Fix this by always clearing the bit in the user process if unregister is successful. Update abi self-test to ensure this occurs properly. Link: https://lkml.kernel.org/r/20230425225107.8525-3-beaub@linux.microsoft.com Suggested-by: Doug Cook <dcook@linux.microsoft.com> Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Beau Belgrave
|
cd98c93286 |
tracing/user_events: Ensure write index cannot be negative
The write index indicates which event the data is for and accesses a
per-file array. The index is passed by user processes during write()
calls as the first 4 bytes. Ensure that it cannot be negative by
returning -EINVAL to prevent out of bounds accesses.
Update ftrace self-test to ensure this occurs properly.
Link: https://lkml.kernel.org/r/20230425225107.8525-2-beaub@linux.microsoft.com
Fixes:
|
||
Sergey Senozhatsky
|
96928d9032 |
seq_buf: Add seq_buf_do_printk() helper
Sometimes we use seq_buf to format a string buffer, which we then pass to printk(). However, in certain situations the seq_buf string buffer can get too big, exceeding the PRINTKRB_RECORD_MAX bytes limit, and causing printk() to truncate the string. Add a new seq_buf helper. This helper prints the seq_buf string buffer line by line, using \n as a delimiter, rather than passing the whole string buffer to printk() at once. Link: https://lkml.kernel.org/r/20230415100110.1419872-1-senozhatsky@chromium.org Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Tested-by: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Linus Torvalds
|
4173cf6fb6 |
hwmon updates for v6.4
- New drivers - Driver for Acbel FSB032 power supply - Driver for StarFive JH71x0 temperature sensor - Added support to existing drivers - aquacomputer_d5next: Support for Aquacomputer Aquastream XT - nct6775: Added various ASUS boards to list of boards supporting WMI - asus-ec-sensors: ROG STRIX Z390-F GAMING, ProArt B550-Creator, - Notable improvements - Regulator event and sysfs notification support for PMBus drivers - Notable cleanup: - Constified pointers to hwmon_channel_info - Various other minor bug fixes and improvements -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEiHPvMQj9QTOCiqgVyx8mb86fmYEFAmRF2DQACgkQyx8mb86f mYEGxhAAnm4r7MkxdBPv8UloSxljTGMtPr+xfJ+TqW+bJVFoPJ57OZ+Coqfa8NTs h58inRehmkYVuYU3dIKYLWq4TiCyCq8W8ACZ/oRiUB7vKEG5Yt5AWw8ZSWjYWf/b b3+N/IdEFSrnR2+xjIx2HcCYfpBomaq/5VDH6DDfRGD+HHkhfp065z1TeiOj4Dr3 3sueu+vbVPowIs55VXhmUwSC95n7+qv9qrA0ZYFtGUd1klDC+4fWy2wQZ+ed1gz2 WATJmbhHu+QhrqFC4qlgiow50FrHjx0EWywEBiwBm9A6bfKNRWitz7YXqe7entP3 TFg9rykBMleowNstwqtMARmaLxzDoH/IpsoIOY8NhGgzka0zy1pVyQ3bXRgVTP2X BRUOqKfj6gsysT3KenUmsMi7Mr+NFJ8LwSl9d4z/v+4ojE5N57l12tdoMaY8qlGs 9bk75xtGuuZm8LYYPTVp1DU3XaF816Qj30fmaBruy3HVgKRyaWw1OEVayZMWQucr KJ+1GoEyoCwlaRDX9UrazPtVg2TocAvIZfUdl2+Zd6WF7Mifl3q9HJg+XMmeZlI5 xRmvMj+srJ99Q2HEWS/SyiOr4n2rjRC+WeTs7N0x6X4zDsbbZTK7ONfEf0Yz1aLL rykeG94DO5qLpz8PQ38X8ONT8OwVcpCg0UF/0xbfAO1zYSqzv5E= =i+Fr -----END PGP SIGNATURE----- Merge tag 'hwmon-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon updates from Guenter Roeck: "New drivers - Driver for Acbel FSB032 power supply - Driver for StarFive JH71x0 temperature sensor Added support to existing drivers: - aquacomputer_d5next: Support for Aquacomputer Aquastream XT - nct6775: Added various ASUS boards to list of boards supporting WMI - asus-ec-sensors: ROG STRIX Z390-F GAMING, ProArt B550-Creator, Notable improvements: - Regulator event and sysfs notification support for PMBus drivers Notable cleanup: - Constified pointers to hwmon_channel_info .. and various other minor bug fixes and improvements" * tag 'hwmon-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (131 commits) hwmon: lochnagar: Remove the unneeded include <linux/i2c.h> hwmon: (pmbus/fsp-3y) Fix functionality bitmask in FSP-3Y YM-2151E hwmon: (adt7475) Use device_property APIs when configuring polarity hwmon: (aquacomputer_d5next) Add support for Aquacomputer Aquastream XT hwmon: (it87) Disable/enable SMBus access for IT8622E chipset hwmon: (it87) Add calls to smbus_enable/smbus_disable as required hwmon: (it87) Test for error in it87_update_device hwmon: (it87) Disable SMBus access for environmental controller registers. docs: hwmon: Add documentaion for acbel-fsg032 PSU hwmon: (pmbus/acbel-fsg032) Add Acbel power supply dt-bindings: trivial-devices: Add acbel,fsg032 dt-bindings: vendor-prefixes: Add prefix for acbel hwmon: (sfctemp) Simplify error message hwmon: (pmbus/ibm-cffps) Use default debugfs attributes and lock function hwmon: (pmbus/core) Add lock and unlock functions hwmon: (pmbus/core) Request threaded interrupt with IRQF_ONESHOT hwmon: (nct6775) update ASUS WMI monitoring list A620/B760/W790 hwmon: ina2xx: add optional regulator support dt-bindings: hwmon: ina2xx: add supply property dt-bindings: hwmon: pwm-fan: Convert to DT schema ... |
||
|
Linus Torvalds
|
3361e9a4ea |
remoteproc updates for v6.4
Unnecessary type casts from the void * rproc->priv pointer is dropped throughout te subsystem. A kernel-doc error is corrected in the Mediatek SCPI IPI implementation. The firmware loading onto the IMX DSP remote processors is reworked to avoid non-32bit memory operations. A module parameter is introduced to assist development of firmware without communication abilities in place. Error paths in imx_dsp_rproc_mbox_alloc() is cleaned up. The cluster configuration handling in the TI K3 R5 driver is corrected and support for the single-R5 core found in the TI AM62x SoC family is introduced. The TI PRU driver device- to virtual-address translation is updated to avoid compiler warning about the unsigned device-address always being larger than 0. The ST remoteproc driver is transitioned to use of_property_present(). Issues with kicks arriving after the STM32 remote processor has been shut down are mitigated by checking the processor's state before handling them. Support for mailbox channels for communication with the remote processors are added to the Xilinx R5 remoteproc driver. The naming of carveouts are corrected and their parsing is reworked. For this a couple of fixes targeting the mailbox subsystem are picked up here as well. Reference counting of of_nodes are corrected in the ST, STM32, RCAR and IMX remoteproc drivers. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmRGncUVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3Fv4QQAOI09pf3QgA/OIUyCdfI83+/WHtp n+WczvqNFhecyYwjmiv2h3QyNb+yZolGFEmFXgG6sboICm5Xji+eU5CG67AQq/q7 QkB4jqp+fu7DYXxr55kmWb4iusgptMxtnKRLUZsSThF2kNrPRny1m+RHd6thPgUK Jt1P0bc599g0RF57fv7VTt5aUKfKrGPQq0i/2h1WOTKGVURXmaNrbcbfZkuK4Jmd IeE13AyrdSZjEdbrLEEfZaYWXS66ubVm2nQRhFJ8z2tEaSawVelsjNDc0QmalQ6c Av1VPPk9nDt1smSDmp6/+91AyCautXKYaCG6E/FKwwrI5xDTGvkiaJL0pk1XVcO3 1VxGH2TVROR4r/J93mRinvDiyOHE8RRaXHv52XPMqyC8DCpfbhqSoL5vjNGiBVef Ox8qlBZBlMFgfsYPCeorfiuv5jOEQxbyghiAdIEHtIv89nrWYwsX8PFVx25C28xr 9ZTGwyWxu8HhTdCLmn4MFuQ9WfzpeTCkVLYS0Cu/elNU44w8qYNNQlPP1jBqDWdD HRby1A2+SeIpfTlrbHHJdQ0ujSrUyLtnYn9AMKqjxyM831dcOOnn0zI1e/xwBpeV kxUziu/zm7Ijr9LLViwJqeZI46eSmJjUhOxsNi1zZFlFw4UknWengbwR9fKf9Mkd LFKFjgAPbnyPJEls =HEds -----END PGP SIGNATURE----- Merge tag 'rproc-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull remoteproc updates from Bjorn Andersson: - Unnecessary type casts from the 'void *' rproc->priv pointer are dropped throughout the subsystem. - A kernel-doc error is corrected in the Mediatek SCPI IPI implementation - The firmware loading onto the IMX DSP remote processors is reworked to avoid non-32bit memory operations. A module parameter is introduced to assist development of firmware without communication abilities in place. Error paths in imx_dsp_rproc_mbox_alloc() is cleaned up - The cluster configuration handling in the TI K3 R5 driver is corrected and support for the single-R5 core found in the TI AM62x SoC family is introduced - The TI PRU driver device- to virtual-address translation is updated to avoid compiler warning about the unsigned device-address always being larger than 0 - The ST remoteproc driver is transitioned to use of_property_present() - Issues with kicks arriving after the STM32 remote processor has been shut down are mitigated by checking the processor's state before handling them. - Support for mailbox channels for communication with the remote processors are added to the Xilinx R5 remoteproc driver. The naming of carveouts are corrected and their parsing is reworked. For this a couple of fixes targeting the mailbox subsystem are picked up here as well. - Reference counting of of_nodes are corrected in the ST, STM32, RCAR and IMX remoteproc drivers * tag 'rproc-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (24 commits) remoteproc: st: Use of_property_present() for testing DT property presence dt-bindings: remoteproc: Drop unneeded quotes remoteproc: imx_dsp_rproc: Fix kernel test robot sparse warning remoteproc: imx_dsp_rproc: Improve exception handling in imx_dsp_rproc_mbox_alloc() remoteproc: pru: Remove always true check positive unsigned value dt-bindings: remoteproc: stm32-rproc: Typo fix remoteproc: stm32_rproc: Add mutex protection for workqueue remoteproc: Remove unnecessary (void*) conversions remoteproc: imx_dsp_rproc: Call of_node_put() on iteration error remoteproc: imx_rproc: Call of_node_put() on iteration error remoteproc: rcar_rproc: Call of_node_put() on iteration error remoteproc: st: Call of_node_put() on iteration error remoteproc: stm32: Call of_node_put() on iteration error remoteproc: k3-r5: Use separate compatible string for TI AM62x SoC family dt-bindings: remoteproc: ti: Add new compatible for AM62 SoC family remoteproc: k3-r5: Simplify cluster mode setting usage remoteproc/mtk_scpi_ipi: Fix one kernel-doc comment remoteproc: xilinx: Add mailbox channels for rpmsg drivers: remoteproc: xilinx: Fix carveout names mailbox: zynqmp: Fix typo in IPI documentation ... |
||
|
Linus Torvalds
|
fe89e9b1af |
rpmsg updates for v6.4
The remove functions of the Qualcomm SMD and GLINK RPM platform drivers are transitioned to the new void returning prototype. Likewise is qcom_smd_unregister_edge() transitioned to void, as it unconditionally returned 0. An assumption about the ordering of the intent request acknowledgement and advertisement of a new intent in the GLINK implementation is corrected. Faulty error handling is corrected is improved in the TX path, and duplicated code, in the same path, is cleaned up. -----BEGIN PGP SIGNATURE----- iQJJBAABCAAzFiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmRGmHkVHGFuZGVyc3Nv bkBrZXJuZWwub3JnAAoJEAsfOT8Nma3FuzgQAIX/G8EKL6fR6Q6aeHUqcyGtwZiu Rp9HA3xWp9WM+vQfCCH+dxaQiQJ7qmnUVxycWyj+os85aGj4Kvz7XnY3w1vU+NRB L7f3vejJHQgbQ1hGRHhsidDsbOjXDfXM2d2YrqvpKKrRyfLMLwLxWFmVRIpXzXsP TYOOtZzvTZBPkSD/qUlSou+65v8xSnrFZstAy3sRhtI/KqrrKO1IKbDqmZ2aVM2k 1j+8dlLmrE+6VhKOBNT21wY9bz2D553pPiyuulhhMpOKHR1jMSmcjiVmhEqm2qQN TirAcgtRcnqP5qn9+fiu8MZ1IbwOO3R4q01VMx1fXPPkVyq0ncNS/dyRFiVZF7fa 21Wtdp6kAFCdKd9AiUkcAecuUlYs9UU1WMGmvfZV2rgMcd2ii4JzY++kR8dbz55p NvNgNNAYwCNXxjqwBi5KLCeLvXnMbRiEEO82McDc5gw44tFCcrJcMiVbLab626/S ITUc8dLTNMG4cEs61ob3wz7sesxwlfWeuTDwRFnlV9JcCzldrc3/GDVBoIgjsBSN trs2/kPXa4sjRKedB+iUEnsfWTrlnYVMMcPgzgbLADc0dPnGQ/evOD+AMMqznDra nIvmWjuNL2IGq1EO9wXcRHFACy3AqrrGUTbaadue7Xb/78gXABHFIK54iFhviKWx oBNyJyJpcogebJe3 =Nbf+ -----END PGP SIGNATURE----- Merge tag 'rpmsg-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux Pull rpmsg updates from Bjorn Andersson: "The remove functions of the Qualcomm SMD and GLINK RPM platform drivers are transitioned to the new void returning prototype. Likewise is qcom_smd_unregister_edge() transitioned to void, as it unconditionally returned 0. An assumption about the ordering of the intent request acknowledgement and advertisement of a new intent in the GLINK implementation is corrected. Faulty error handling is corrected is improved in the TX path, and duplicated code, in the same path, is cleaned up" * tag 'rpmsg-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: rpmsg: glink: Consolidate TX_DATA and TX_DATA_CONT rpmsg: glink: Propagate TX failures in intentless mode as well rpmsg: glink: Wait for intent, not just request ack rpmsg: glink: Transition intent request signaling to wait queue rpmsg: qcom_smd: Convert to platform remove callback returning void rpmsg: qcom_glink_rpm: Convert to platform remove callback returning void rpmsg: qcom_smd: Make qcom_smd_unregister_edge() return void |
||
|
Linus Torvalds
|
c5c06e2780 |
MMC core:
- Allow an invalid regulator in mmc_regulator_set_ocr() - Log about empty non-removable slots - Add helpers to enable/disable the vqmmc regulator MMC host: - mtk-sd: Add support for the mt8365 variant - renesas_sdhi: Remove support for R-Car H3 ES1.* variants - sdhci_am654: Add power management support - sdhci-cadence: Add support for eMMC hardware reset - sdhci-cadence: Add support for AMD Pensando Elba variant - sdhci-msm: Add support for the IPQ5018 variant - sdhci-msm: Add support for the QCM2290 variant - sdhci-of-arasan: Skip setting clock delay for 400KHz - sdhci-of-arasan: Add support for the Xilinx Versal Net variant - sdhci-of-arasan: Remove Intel Thunder Bay SOC support - sdhci-of-arasan: Add support to request the "gate" clock - sdhci-of-dwcmshc: Properly determine max clock on Rockchip - sdhci-of-esdhc: Fix quirk to ignore command inhibit for data - sdhci-pci-o2micro: Fix SDR50 mode timing issue MEMSTICK: - r592: Fix use-after-free bug in r592_remove due to race condition -----BEGIN PGP SIGNATURE----- iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmRGi1YXHHVsZi5oYW5z c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCn2BQ//e5pre/zrviB4FrWG+Qaq9Guv YXJG4/NTU5l/qjL5anxUekPiueK4wmMTywOdHEtM1DpVqizZuIWQmx7Z7U0pyJQu 9g5g73IiCxwjT/XFTeAru95Wxm0sNrM0r4vxSQM/iNv3niAXlRMo3n1jtWU+zfZZ G5vlVDFMduQ9fJz31hE0fYqEOAhyP2Aj2OGsIS4YNjN4o6G9OKYJksmsSFpYOehi c4X1TEcckDbW6gZyaOGXMnvQCQatMtYFeALPhnd+7UYYu76fgGrDQRFNC2VZqg0B XpbfA6Zopq05OG/kCGEG5ekLe05VtfgoUkN1blbtqfnSCeZZ5erqN9vHEPQLQ1UV SXair8Kh5fgP2iLRMXIZYgCWf1PGkztDTXxflVqS3VqjvF7tD3IPImBZoxHX8Gfe s9vb+woRshLS7L89iNGovSMp+ApDvaluNDuW0Y3LD6ejoRCK7Lni1l7tQbfkTU5H NqInOJvlx3QatQ5PSI9CxOY3Gz+6MN2qtLfUP84CKerlb1MR7dPsONXzUCmLOH1U xZE2XhZ9LYeWExxZendbYGuTUScwMOQTj1vF3IkyBI17+PG3Bkfv9oqB7qrlKGdL 6+A1MyIdzatV8xS1uQ/ylyUjzlPInfTncuZ30ZHwyh5mFofD+5a3JI4cv5wzmR8v m1H+hhQGZS8Gk3i1lN4= =qt1U -----END PGP SIGNATURE----- Merge tag 'mmc-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC updates from Ulf Hansson: "MMC core: - Allow an invalid regulator in mmc_regulator_set_ocr() - Log about empty non-removable slots - Add helpers to enable/disable the vqmmc regulator MMC host: - mtk-sd: Add support for the mt8365 variant - renesas_sdhi: Remove support for R-Car H3 ES1.* variants - sdhci_am654: Add power management support - sdhci-cadence: Add support for eMMC hardware reset - sdhci-cadence: Add support for AMD Pensando Elba variant - sdhci-msm: Add support for the IPQ5018 variant - sdhci-msm: Add support for the QCM2290 variant - sdhci-of-arasan: Skip setting clock delay for 400KHz - sdhci-of-arasan: Add support for the Xilinx Versal Net variant - sdhci-of-arasan: Remove Intel Thunder Bay SOC support - sdhci-of-arasan: Add support to request the "gate" clock - sdhci-of-dwcmshc: Properly determine max clock on Rockchip - sdhci-of-esdhc: Fix quirk to ignore command inhibit for data - sdhci-pci-o2micro: Fix SDR50 mode timing issue MEMSTICK: - r592: Fix use-after-free bug in r592_remove due to race condition" * tag 'mmc-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (40 commits) dt-bindings: mmc: sdhci-msm: Document the IPQ5018 compatible mmc: vub300: remove unreachable code mmc: sdhci-cadence: Support mmc hardware reset mmc: sdhci-cadence: Add AMD Pensando Elba SoC support mmc: sdhci-cadence: Support device specific init during probe mmc: sdhci-cadence: Enable device specific override of writel() dt-bindings: mmc: cdns: Add AMD Pensando Elba SoC mmc: core: Remove unused macro mmc_req_rel_wr mmc: sdhci-of-arasan: Skip setting clock delay for 400KHz mmc: sdhci-of-arasan: Add support for eMMC5.1 on Xilinx Versal Net platform dt-bindings: mmc: arasan,sdci: Add Xilinx Versal Net compatible mmc: sdhci_am654: Add support for PM suspend/resume mmc: core: remove unnecessary (void*) conversions dt-bindings: mmc: fsl-imx-esdhc: ref sdhci-common.yaml mmc: sdhci-of-esdhc: fix quirk to ignore command inhibit for data mmc: core: Log about empty non-removable slots dt-bindings: mmc: fujitsu: Add Socionext Synquacer mmc: sdricoh_cs: remove unused sdricoh_readw function dt-bindings: mmc: Remove bindings for Intel Thunder Bay SoC" mmc: sdhci-of-arasan: Remove Intel Thunder Bay SOC support ... |
||
|
Linus Torvalds
|
eb8322d714 |
Core MTD changes:
* dt-bindings: Drop unneeded quotes
* mtdblock: Tolerate corrected bit-flips
* Use of_property_read_bool() for boolean properties
* Avoid magic values
* Avoid printing error messages on probe deferrals
* Prepare mtd_otp_nvmem_add() to handle -EPROBE_DEFER
* Fix error path for nvmem provider
* Fix nvmem error reporting
* Provide unique name for nvmem device
MTD device changes:
* lpddr_cmds: Remove unused words variable
* bcm63xxpart: Remove MODULE_LICENSE in non-modules
SPI NOR core changes:
* Introduce Read While Write support for flashes featuring several banks
* Set the 4-Byte Address Mode method based on SFDP data
* Allow post_sfdp hook to return errors
* Parse SCCR MC table and introduce support for multi-chip devices
SPI NOR manufacturer drivers changes:
* macronix: Add support for mx25uw51245g with RWW
* spansion:
- Determine current address mode at runtime as it can be changed in a
non-volatile way and differ from factory defaults or from what SFDP
advertises.
- Enable JFFS2 write buffer mode for few ECC'd NOR flashes: S25FS256T,
s25hx and s28hx
- Add support for s25hl02gt and s25hs02gt
Raw NAND core changes:
* Convert to platform remove callback returning void
* Fix spelling mistake waifunc() -> waitfunc()
Raw NAND controller driver changes:
* imx: Remove unused is_imx51_nfc and imx53_nfc functions
* omap2: Drop obsolete dependency on COMPILE_TEST
* orion: Use devm_platform_ioremap_resource()
* qcom:
- Use of_property_present() for testing DT property presence
- Use devm_platform_get_and_ioremap_resource()
* stm32_fmc2: Depends on ARCH_STM32 instead of MACH_STM32MP157
* tmio: Remove reference to config MTD_NAND_TMIO in the parsers
Raw NAND manufacturer driver changes:
* hynix: Fix up bit 0 of sdr_timing_mode
SPI-NAND changes:
* Add support for ESMT F50x1G41LB
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmRANmIACgkQJWrqGEe9
VoRU2QgAl8XFkLs1h88wGi6ln/MSK0cQJZWUzteGgWuaBQCMNfgGFzqPHyJ7ygO9
l4U4O1L/IvACvJx5QHm/lH5Mig23jym9J8YfV1Kf9aVYOlBKRNysbi+DdktESGG9
6HmpS0nQfkC84qA8ouInOp+AZYjFEPRrBfp5UWkSRHiQJvcYnt2iS2oOLk3LNY6y
zduBOno3mric2ZlBbg+ZCURhQzrr3k8c4VXV+LHSslqsmH/2sOFlg78hLJx922Y+
FTfYnx82iLIvFAJttRi2bXWKuE1Yr2XWJ3iEHKxmOA2vPmYi6mDBHTYhnikGSpm+
GhARHH+JhW7qzLbaq5ZC3HGH58aC/g==
=aYlo
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"Core MTD changes:
- dt-bindings: Drop unneeded quotes
- mtdblock: Tolerate corrected bit-flips
- Use of_property_read_bool() for boolean properties
- Avoid magic values
- Avoid printing error messages on probe deferrals
- Prepare mtd_otp_nvmem_add() to handle -EPROBE_DEFER
- Fix error path for nvmem provider
- Fix nvmem error reporting
- Provide unique name for nvmem device
MTD device changes:
- lpddr_cmds: Remove unused words variable
- bcm63xxpart: Remove MODULE_LICENSE in non-modules
SPI NOR core changes:
- Introduce Read While Write support for flashes featuring several
banks
- Set the 4-Byte Address Mode method based on SFDP data
- Allow post_sfdp hook to return errors
- Parse SCCR MC table and introduce support for multi-chip devices
SPI NOR manufacturer drivers changes:
- macronix: Add support for mx25uw51245g with RWW
- spansion:
- Determine current address mode at runtime as it can be changed
in a non-volatile way and differ from factory defaults or from
what SFDP advertises.
- Enable JFFS2 write buffer mode for few ECC'd NOR flashes:
S25FS256T, s25hx and s28hx
- Add support for s25hl02gt and s25hs02gt
Raw NAND core changes:
- Convert to platform remove callback returning void
- Fix spelling mistake waifunc() -> waitfunc()
Raw NAND controller driver changes:
- imx: Remove unused is_imx51_nfc and imx53_nfc functions
- omap2: Drop obsolete dependency on COMPILE_TEST
- orion: Use devm_platform_ioremap_resource()
- qcom:
- Use of_property_present() for testing DT property presence
- Use devm_platform_get_and_ioremap_resource()
- stm32_fmc2: Depends on ARCH_STM32 instead of MACH_STM32MP157
- tmio: Remove reference to config MTD_NAND_TMIO in the parsers
Raw NAND manufacturer driver changes:
- hynix: Fix up bit 0 of sdr_timing_mode
SPI-NAND changes:
- Add support for ESMT F50x1G41LB"
* tag 'mtd/for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (55 commits)
mtd: nand: Convert to platform remove callback returning void
mtd: onenand: omap2: Drop obsolete dependency on COMPILE_TEST
mtd: spi-nor: spansion: Add support for s25hl02gt and s25hs02gt
mtd: spi-nor: spansion: Add a new ->ready() hook for multi-chip device
mtd: spi-nor: spansion: Rework cypress_nor_quad_enable_volatile() for multi-chip device support
mtd: spi-nor: spansion: Rework cypress_nor_get_page_size() for multi-chip device support
mtd: spi-nor: sfdp: Add support for SCCR map for multi-chip device
mtd: spi-nor: Extract volatile register offset from SCCR map
mtd: spi-nor: Allow post_sfdp hook to return errors
mtd: spi-nor: spansion: Rename method to cypress_nor_get_page_size
mtd: spi-nor: spansion: Enable JFFS2 write buffer for S25FS256T
mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon s25hx SEMPER flash
mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon s28hx SEMPER flash
mtd: spi-nor: spansion: Determine current address mode
mtd: spi-nor: core: Introduce spi_nor_set_4byte_addr_mode()
mtd: spi-nor: core: Update flash's current address mode when changing address mode
mtd: spi-nor: Stop exporting spi_nor_restore()
mtd: spi-nor: Set the 4-Byte Address Mode method based on SFDP data
mtd: spi-nor: core: Make spi_nor_set_4byte_addr_mode_brwr public
mtd: spi-nor: core: Update name and description of spi_nor_set_4byte_addr_mode
...
|
||
|
Linus Torvalds
|
2c96606a0f |
gpio updates for v6.4-rc1
New drivers:
- add a driver for the Loongson GPIO controller
- add a driver for the fxl6408 I2C GPIO expander
- add a GPIO module containing code common for Intel Elkhart Lake and
Merrifield platforms
- add a driver for the Intel Elkhart Lake platform reusing the code from
the intel tangier library
GPIOLIB core:
- GPIO ACPI improvements
- simplify gpiochip_add_data_with_keys() fwnode handling
- cleanup header inclusions (remove unneeded ones, order the rest
alphabetically)
- remove duplicate code (reuse krealloc() instead of open-coding it, drop
a duplicated check in gpiod_find_and_request())
- reshuffle the code to remove unnecessary forward declarations
- coding style cleanups and improvements
- add a helper for accessing device fwnodes
- small updates in docs
Driver improvements:
- convert all remaining GPIO irqchip drivers to using immutable irqchips
- drop unnecessary of_match_ptr() macro expansions
- shrink the code in gpio-merrifield significantly by reusing the code from
gpio-tangier + minor tweaks to the driver code
- remove MODULE_LICENSE() from drivers that can only be built-in
- add device-tree support to gpio-loongson1
- use new regmap features in gpio-104-dio-48e and gpio-pcie-idio-24
- minor tweaks and fixes to gpio-xra1403, gpio-sim, gpio-tegra194, gpio-omap,
gpio-aspeed, gpio-raspberrypi-exp
- shrink code in gpio-ich and gpio-pxa
- Kconfig tweak for gpio-pmic-eic-sprd
-----BEGIN PGP SIGNATURE-----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=X+sP
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have some new drivers, significant refactoring of existing intel
platforms, lots of improvements all around, mass conversion to using
immutable irqchips by drivers that had not been converted individually
yet and some changes in the core library code.
Summary:
New drivers:
- add a driver for the Loongson GPIO controller
- add a driver for the fxl6408 I2C GPIO expander
- add a GPIO module containing code common for Intel Elkhart Lake and
Merrifield platforms
- add a driver for the Intel Elkhart Lake platform reusing the code
from the intel tangier library
GPIOLIB core:
- GPIO ACPI improvements
- simplify gpiochip_add_data_with_keys() fwnode handling
- cleanup header inclusions (remove unneeded ones, order the rest
alphabetically)
- remove duplicate code (reuse krealloc() instead of open-coding it,
drop a duplicated check in gpiod_find_and_request())
- reshuffle the code to remove unnecessary forward declarations
- coding style cleanups and improvements
- add a helper for accessing device fwnodes
- small updates in docs
Driver improvements:
- convert all remaining GPIO irqchip drivers to using immutable
irqchips
- drop unnecessary of_match_ptr() macro expansions
- shrink the code in gpio-merrifield significantly by reusing the
code from gpio-tangier + minor tweaks to the driver code
- remove MODULE_LICENSE() from drivers that can only be built-in
- add device-tree support to gpio-loongson1
- use new regmap features in gpio-104-dio-48e and gpio-pcie-idio-24
- minor tweaks and fixes to gpio-xra1403, gpio-sim, gpio-tegra194,
gpio-omap, gpio-aspeed, gpio-raspberrypi-exp
- shrink code in gpio-ich and gpio-pxa
- Kconfig tweak for gpio-pmic-eic-sprd"
* tag 'gpio-updates-for-v6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (99 commits)
gpio: gpiolib: Simplify gpiochip_add_data_with_key() fwnode
gpiolib: Add gpiochip_set_data() helper
gpiolib: Move gpiochip_get_data() higher in the code
gpiolib: Check array_info for NULL only once in gpiod_get_array()
gpiolib: Replace open coded krealloc()
gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xNU
gpiolib: acpi: Move ACPI device NULL check to acpi_get_driver_gpio_data()
gpiolib: acpi: use the fwnode in acpi_gpiochip_find()
gpio: mm-lantiq: Fix typo in the newly added header filename
sh: mach-x3proto: Add missing #include <linux/gpio/driver.h>
powerpc/40x: Add missing select OF_GPIO_MM_GPIOCHIP
gpio: xlp: Convert to immutable irq_chip
gpio: xilinx: Convert to immutable irq_chip
gpio: xgs-iproc: Convert to immutable irq_chip
gpio: visconti: Convert to immutable irq_chip
gpio: tqmx86: Convert to immutable irq_chip
gpio: thunderx: Convert to immutable irq_chip
gpio: stmpe: Convert to immutable irq_chip
gpio: siox: Convert to immutable irq_chip
gpio: rda: Convert to immutable irq_chip
...
|