Singular #ifdef IS_REACHABLE(CONFIG_GPIOLIB) weren't covering all the
gpiolib functions that were being referenced.
Update the code regions that are commented out when CONFIG_GPIOLIB isn't
enabled to avoid errors.
Fixes: 960f9df7c6 ("HID: mcp2221: add ADC/DAC support via iio subsystem")
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Use (__force __le16) cast for adc_values le16_to_cpu conversion to correct following sparse
warnings:
drivers/hid/hid-mcp2221.c:950:32: sparse: sparse: cast to restricted __le16
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 960f9df7c6 ("HID: mcp2221: add ADC/DAC support via iio subsystem")
Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit ff6d365898 ("soc: qcom: qmi: use const for struct
qmi_elem_info") allows QMI message encoding/decoding rules to be
const, so do that for IPA.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The stm32_rng_read() function samples TRNG by 4 bytes until at
least 5 bytes are free in the input buffer. The last four bytes
are never read. For example, 60 bytes are returned in case the
input buffer size is 64 bytes.
Read until at least 4 bytes are free in the input buffer. Fill
the buffer entirely in case the buffer size is divisible by 4.
Cc: Oleg Karfich <oleg.karfich@wago.com>
Signed-off-by: Tomas Marek <tomas.marek@elrest.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The stm32_rng_read() function uses `retval` variable as a counter of
generated random bytes. However, the same variable is used to store
a result of the polling function in case the driver is waiting until
the TRNG is ready. The TRNG generates random numbers by 16B. One
loop read 4B. So, the function calls the polling every 16B, i.e.
every 4th loop. The `retval` counter is reset on poll call and only
number of bytes read after the last poll call is returned to the
caller. The remaining sampled random bytes (for example 48 out of
64 in case 64 bytes are read) are not used.
Use different variable to store the polling function result and
do not overwrite `retval` counter.
Cc: Oleg Karfich <oleg.karfich@wago.com>
Signed-off-by: Tomas Marek <tomas.marek@elrest.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the defined variable "dev" to make the code cleaner.
Signed-off-by: jianchunfu <jianchunfu@cmss.chinamobile.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1. Add trng compatible name for MT7986
2. Fix mtk_rng_wait_ready() function
Signed-off-by: Mingming.Su <Mingming.Su@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add missing statesize to hash templates.
This is mandatory otherwise no algorithms can be registered as the core
requires statesize to be set.
CC: stable@kernel.org # 4.3+
Reported-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Tested-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Fixes: 0a625fd2ab ("crypto: n2 - Add Niagara2 crypto driver")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When a test mode invokes multiple tests (e.g., mode 0 invokes modes
1 through 199, and mode 3 tests three block cipher modes with des),
don't keep accumulating the return values with ret += tcrypt_test(),
which results in a bogus value if more than one report a nonzero
value (e.g., two reporting -2 (-ENOENT) end up reporting -4 (-EINTR)).
Instead, keep track of the minimum return value reported by any
subtest.
Fixes: 4e033a6bc7 ("crypto: tcrypt - Do not exit on success in fips mode")
Signed-off-by: Robert Elliott <elliott@hpe.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This fixes a number of trivial sparse warnings in ixp4xx.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adding RNG NPCM8XX support to NPCM RNG driver.
RNG NPCM8XX uses a different clock prescaler.
As part of adding NPCM8XX support:
- Add NPCM8XX specific compatible string.
- Add data to handle architecture specific clock prescaler.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are a couple of spelling mistakes in dev_err messages. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: nicolas.toromanoff@foss.st.com
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
SoCs containing 0x14CA are present both in datacenter parts that
support SEV as well as client parts that support TEE.
Cc: stable@vger.kernel.org # 5.15+
Tested-by: Rijo-john Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If alloc_workqueue() fails in nitrox_mbox_init() it deallocates
ndev->iov.vfdev and returns error code, but then nitrox_sriov_init()
calls nitrox_sriov_cleanup() where ndev->iov.vfdev is deallocated
again.
Fix this by nulling ndev->iov.vfdev after the first deallocation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 9e5de3e06e ("crypto: cavium/nitrox - Add mailbox...")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After commit bc3854476f36("crypto: ccp - Use a single queue for proper ordering
of tfm requests"), no one use struct ccp_crypto_cpu, so remove it.
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The DMA address need to be stored in a dma_addr_t
Fixes: 359e893e8a ("crypto: sun8i-ss - rework handling of IV")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is to add MaxLinear platform into compatible id.
Firmware endianness option is added since MaxLinear
firmware is in little endian format.
Signed-off-by: Peter Harliman Liem <pliem@maxlinear.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is to add fw_little_endian option, which can
be used for platform which firmware is using little-endian
(instead of big-endian).
Signed-off-by: Peter Harliman Liem <pliem@maxlinear.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently platform data is assigned directly to
version string(instead of struct). To make it more
scalable, we move it to use data struct instead.
This allows customization for individual platforms other
than version string.
Signed-off-by: Peter Harliman Liem <pliem@maxlinear.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Zero-length arrays are deprecated and we are moving towards adopting
C99 flexible-array members, instead. So, replace zero-length arrays
declarations in anonymous union with the new DECLARE_FLEX_ARRAY()
helper macro.
This helper allows for flexible-array members in unions.
Link: https://github.com/KSPP/linux/issues/193
Link: https://github.com/KSPP/linux/issues/216
Link: https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add missing __init/__exit annotations to module init/exit funcs
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Acked-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
scatterwalk_map() is an inline function already defined in the
header file, it is necessary to delete the re-declaration at the
same location, which was left out in the header file by an
earlier modification.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The variable odata has been introduced into the function scope as
a variable and should be used directly.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
After the device is reset, the VF needs to re-enable communication
interrupt before the VF sends restart complete message to the PF.
If the interrupt is re-enabled after the VF notifies the PF, the PF
may fail to send messages to the VF after receiving VF's restart
complete message.
Fixes: 760fe22cf5 ("crypto: hisilicon/qm - update reset flow")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Change the value of clock gating register to 0x7fff to enable
clock gating of the address prefetch module. When the device is
idle, the clock is turned off to save power.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In qm_get_xqc_depth(), parameters low_bits and high_bits save
the values of the corresponding bits. However, the values saved by the
two parameters are opposite. As a result, the values returned to the
callers are incorrect.
Fixes: 129a9f3401 ("crypto: hisilicon/qm - get qp num and depth from hardware registers")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
dev_to_node() can handle the case when CONFIG_NUMA is not set, so the
check of CONFIG_NUMA is redundant and can be removed.
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
In hpre_remove(), when the disable operation of qm sriov failed,
the following logic should continue to be executed to release the
remaining resources that have been allocated, instead of returning
directly, otherwise there will be resource leakage.
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
crypto_tfm::__crt_ctx is not guaranteed to be 16-byte aligned on x86-64.
This causes crashes due to movaps instructions in clmul_polyval_update.
Add logic to align polyval_tfm_ctx to 16 bytes.
Cc: <stable@vger.kernel.org>
Fixes: 34f7f6c301 ("crypto: x86/polyval - Add PCLMULQDQ accelerated implementation of POLYVAL")
Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes a warning that occurs when rc table support is enabled
(IEEE80211_HW_SUPPORTS_RC_TABLE) in mac80211_hwsim and the PS mode
is changed via the exported debugfs attribute.
When the PS mode is changed, a packet is broadcasted via
hwsim_send_nullfunc by creating and transmitting a plain skb with only
header initialized. The ieee80211 rate array in the control buffer is
zero-initialized. When ratetbl support is enabled, ieee80211_get_tx_rates
is called for the skb with sta parameter set to NULL and thus no
ratetbl can be used. The final rate array then looks like
[-1,0; 0,0; 0,0; 0,0] which causes the warning in ieee80211_get_tx_rate.
The issue is fixed by setting the count of the first rate with idx '0'
to 1 and hence ieee80211_get_tx_rates won't overwrite it with idx '-1'.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When invoking function cfg80211_calculate_bitrate_eht about
(320 MHz, EHT-MCS 13, EHT-NSS 2, EHT-GI 0), which means the
parameters as flags: 0x80, bw: 7, mcs: 13, eht_gi: 0, nss: 2,
this formula (result * rate->nss) will overflow and causes
the returned bitrate to be 3959 when it should be 57646.
Here is the explanation:
u64 tmp;
u32 result;
…
/* tmp = result = 4 * rates_996[0]
* = 4 * 480388888 = 0x72889c60
*/
tmp = result;
/* tmp = 0x72889c60 * 6144 = 0xabccea90000 */
tmp *= SCALE;
/* tmp = 0xabccea90000 / mcs_divisors[13]
* = 0xabccea90000 / 5120 = 0x8970bba6
*/
do_div(tmp, mcs_divisors[rate->mcs]);
/* result = 0x8970bba6 */
result = tmp;
/* normally (result * rate->nss) = 0x8970bba6 * 2 = 0x112e1774c,
* but since result is u32, (result * rate->nss) = 0x12e1774c,
* overflow happens and it loses the highest bit.
* Then result = 0x12e1774c / 8 = 39595753,
*/
result = (result * rate->nss) / 8;
Signed-off-by: Paul Zhang <quic_paulz@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the function query_regdb_file() the alpha2 parameter is duplicated
using kmemdup() and subsequently freed in regdb_fw_cb(). However,
request_firmware_nowait() can fail without calling regdb_fw_cb() and
thus leak memory.
Fixes: 007f6c5e6e ("cfg80211: support loading regulatory database as firmware file")
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_register_hw free the allocated cipher suites when
registering wiphy fail, and ieee80211_free_hw will re-free it.
set wiphy_ciphers_allocated to false after freeing allocated
cipher suites.
Signed-off-by: taozhang <taozhang@bestechnic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
All we're going to do with this pointer is assign it to
another __rcu pointer, but sparse can't see that, so
use rcu_access_pointer() to silence the warning here.
Fixes: c90b93b5b7 ("wifi: cfg80211: update hidden BSSes to avoid WARN_ON")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add DT for DHCOR Testbench board, which is a testbench for testing of
DHCOR SoM during manufacturing. This is effectively a trimmed down
version of AV96 board with CSI-2 bridge, HDMI bridge, WiFi, Audio and
LEDs removed and used as GPIOs instead. Furthermore, the PMIC Buck3
is always configured from PMIC NVM to cater for both 1V8 and 3V3 SoM
variant.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add DT compatible string for DHCOR Testbench board, which is a testbench
for testing of DHCOR SoM during manufacturing. This is effectively a
trimmed down version of AV96 board with CSI-2 bridge, HDMI bridge, WiFi,
Audio and LEDs removed and used as GPIOs instead.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The dai-format and format are handled equally by sound-core.c , the
later is however the only documented property in audio-graph-port.yaml .
Switch to the later.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Olivier Moysan <olivier.moysan@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The default-trigger setting set to none has no impact and triggers DT
dtbs_check warning, remove it:
"
arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dtb: led: led4:linux,default-trigger: 'oneOf' conditional failed, one must be fixed:
"
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Replace "mdio0" node with "mdio" to match mdio.yaml DT schema.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The Avenger96 is populated with STM32MP157A DHCOR SoM, drop the
stm32mp15xc.dtsi which should only be included in DTs of devices
which are populated with STM32MP15xC/F SoC as the stm32mp15xc.dtsi
enables CRYP block not present in the STM32MP15xA/D SoC .
Fixes: 7e76f82acd ("ARM: dts: stm32: Split Avenger96 into DHCOR SoM and Avenger96 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The generic EFI stub can be instructed to avoid SetVirtualAddressMap(),
and simply run with the firmware's 1:1 mapping. In this case, it
populates the virtual address fields of the runtime regions in the
memory map with the physical address of each region, so that the mapping
code has to be none the wiser. Only if SetVirtualAddressMap() fails, the
virtual addresses are wiped and the kernel code knows that the regions
cannot be mapped.
However, wiping amounts to setting it to zero, and if a runtime region
happens to live at physical address 0, its valid 1:1 mapped virtual
address could be mistaken for a wiped field, resulting on loss of access
to the EFI services at runtime.
So let's only assume that VA == 0 means 'no runtime services' if the
region in question does not live at PA 0x0.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The linker script symbol definition that captures the size of the
compressed payload inside the zboot decompressor (which is exposed via
the image header) refers to '.' for the end of the region, which does
not give the correct result as the expression is not placed at the end
of the payload. So use the symbol name explicitly.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
To stop the bots from sending sparse warnings to me and the list about
efi_main() not having a prototype, decorate it with asmlinkage so that
it is clear that it is called from assembly, and therefore needs to
remain external, even if it is never declared in a header file.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Commit bbc6d2c6ef ("efi: vars: Switch to new wrapper layer")
refactored the efivars layer so that the 'business logic' related to
which UEFI variables affect the boot flow in which way could be moved
out of it, and into the efivarfs driver.
This inadvertently broke setting variables on firmware implementations
that lack the QueryVariableInfo() boot service, because we no longer
tolerate a EFI_UNSUPPORTED result from check_var_size() when calling
efivar_entry_set_get_size(), which now ends up calling check_var_size()
a second time inadvertently.
If QueryVariableInfo() is missing, we support writes of up to 64k -
let's move that logic into check_var_size(), and drop the redundant
call.
Cc: <stable@vger.kernel.org> # v6.0
Fixes: bbc6d2c6ef ("efi: vars: Switch to new wrapper layer")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Amadeusz reports KASAN use-after-free errors introduced by commit
3881ee0b1e ("efi: avoid efivars layer when loading SSDTs from
variables"). The problem appears to be that the memory that holds the
new ACPI table is now freed unconditionally, instead of only when the
ACPI core reported a failure to load the table.
So let's fix this, by omitting the kfree() on success.
Cc: <stable@vger.kernel.org> # v6.0
Link: https://lore.kernel.org/all/a101a10a-4fbb-5fae-2e3c-76cf96ed8fbd@linux.intel.com/
Fixes: 3881ee0b1e ("efi: avoid efivars layer when loading SSDTs from variables")
Reported-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
The zboot decompressor series introduced a feature to sign the PE/COFF
kernel image for secure boot as part of the kernel build. This was
necessary because there are actually two images that need to be signed:
the kernel with the EFI stub attached, and the decompressor application.
This is a bit of a burden, because it means that the images must be
signed on the the same system that performs the build, and this is not
realistic for distros.
During the next cycle, we will introduce changes to the zboot code so
that the inner image no longer needs to be signed. This means that the
outer PE/COFF image can be handled as usual, and be signed later in the
release process.
Let's remove the associated Kconfig options now so that they don't end
up in a LTS release while already being deprecated.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
A splat from kmem_cache_destroy() was seen with a kernel prior to
commit ee2653bbe8 ("iommu/vt-d: Remove domain and devinfo mempool")
when there was a failure in init_dmars(), because the iommu_domain
cache still had objects. While the mempool code is now gone, there
still is a leak of the si_domain memory if init_dmars() fails. So
clean up si_domain in the init_dmars() error path.
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Fixes: 86080ccc22 ("iommu/vt-d: Allocate si_domain in init_dmars()")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20221010144842.308890-1-jsnitsel@redhat.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
