The ntfs3 file system driver does not convert the target path of
junction points to a proper Linux path. As junction points targets
are always absolute paths (they start with a drive letter), all
junctions will result in broken links.
Translate the targets of junction points to relative paths so they
point to directories inside the mounted volume. Note that Windows
allows junction points to reference directories in another drive.
However, as there is no way to know which drive the junctions refer
to, we assume they always target the same file system they are in.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214833
Signed-off-by: Daniel Pinto <danielpinto52@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Prefer using kmalloc_array(a, b) over kmalloc(a * b) as this
improves semantics since kmalloc is intended for allocating an
array of memory.
Signed-off-by: Kenneth Lee <klee33@uw.edu>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
The bug occours due to a misuse of `attr` variable instead of `attr_b`.
`attr` is being initialized as NULL, then being derenfernced
as `attr->res.data_size`.
This bug causes a crash of the ntfs3 driver itself,
If compiled directly to the kernel, it crashes the whole system.
Signed-off-by: Alon Zahavi <zahavi.alon@gmail.com>
Co-developed-by: Tal Lossos <tallossos@gmail.com>
Signed-off-by: Tal Lossos <tallossos@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
ntfs3's dmask and fmask mount options are 16-bit quantities but are displayed
as 1-extended 32-bit values in /proc/mounts. Fix this by circumventing
integer promotion.
Signed-off-by: Marc Aurèle La France <tsi@tuyoix.net>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Many filesystems already use free_inode callback,
so we will use it too from now on.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
With this option all files with filename[0] == '.'
will have FILE_ATTRIBUTE_HIDDEN attribute.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
The codec can support any image size WxH,
with arbitrary W (image width) and H (image height) dimensions.
But it requires buffer alignment,
so driver can report the aligned resolution through the g_fmt,
and report the actual resolution through the g_selection.
For encoder, it even support to encode a smaller jpeg
than the original picture through s_selection api.
For the decoder, we do not support cropping a portion smaller
than the original picture, due to hardware limitations (wrapper side).
Fixes: 9e7aa76cdb ("media: imx-jpeg: Align upwards buffer size")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
refactor the func interface of mtk_jpeg_dec_set_config
for decode
Signed-off-by: kyrie wu <kyrie.wu@mediatek.com>
Signed-off-by: irui wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
add output reorder func to reorder the output images
to ensure the output pic is consistent with the input images.
Signed-off-by: kyrie wu <kyrie.wu@mediatek.com>
Signed-off-by: irui wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add jpeg decoding worker to ensure that three HWs
run in parallel in MT8195.
Signed-off-by: kyrie wu <kyrie.wu@mediatek.com>
Signed-off-by: irui wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
support jpegdec multi-hardware includes HW0/HW1/HW2.
Signed-off-by: kyrie wu <kyrie.wu@mediatek.com>
Signed-off-by: irui wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
mtk jpeg decoder is built as a module, export some functions to make them
visible by other modules.
Signed-off-by: kyrie wu <kyrie.wu@mediatek.com>
Signed-off-by: irui wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There are two HWs in mt8195. Since the two HWs run
in parallel, it is necessary to reorder the output images
to ensure that the order is consistent with the input images.
Signed-off-by: kyrie wu <kyrie.wu@mediatek.com>
Signed-off-by: irui wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add jpeg encoding worker to ensure that two HWs
run in parallel in MT8195.
Signed-off-by: kyrie wu <kyrie.wu@mediatek.com>
Signed-off-by: irui wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
support jpeg encode multi-hardware includes HW0 and HW1.
Signed-off-by: kyrie wu <kyrie.wu@mediatek.com>
Signed-off-by: irui wang <irui.wang@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
mtk jpeg encoder is built as a module, export some functions to make them
visible by other modules.
Signed-off-by: kyrie wu <kyrie.wu@mediatek.com>
Signed-off-by: irui wang <irui.wang@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
There is a hardware bug that the interrupt STMBUF_HALF may be triggered
after or when disable interrupt.
It may led to unexpected kernel panic.
And interrupt STMBUF_HALF and STMBUF_RTND have no other effect.
So disable them and the unused interrupts.
meanwhile clear the interrupt status when disable interrupt.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
When enable kasan and kfence's in-kernel kunit test with slub_debug on,
it caught a problem (in linux-next tree):
------------[ cut here ]------------
kmem_cache_destroy test: Slab cache still has objects when called from test_exit+0x1a/0x30
WARNING: CPU: 3 PID: 240 at mm/slab_common.c:492 kmem_cache_destroy+0x16c/0x170
Modules linked in:
CPU: 3 PID: 240 Comm: kunit_try_catch Tainted: G B N 6.0.0-rc7-next-20220929 #52
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:kmem_cache_destroy+0x16c/0x170
Code: 41 5c 41 5d e9 a5 04 0b 00 c3 cc cc cc cc 48 8b 55 60 48 8b 4c 24 20 48 c7 c6 40 37 d2 82 48 c7 c7 e8 a0 33 83 e8 4e d7 14 01 <0f> 0b eb a7 41 56 41 89 d6 41 55 49 89 f5 41 54 49 89 fc 55 48 89
RSP: 0000:ffff88800775fea0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffffffff83bdec48 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 1ffff11000eebf9e RDI: ffffed1000eebfc6
RBP: ffff88804362fa00 R08: ffffffff81182e58 R09: ffff88800775fbdf
R10: ffffed1000eebf7b R11: 0000000000000001 R12: 000000008c800d00
R13: ffff888005e78040 R14: 0000000000000000 R15: ffff888005cdfad0
FS: 0000000000000000(0000) GS:ffff88807ed00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000000360e001 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
test_exit+0x1a/0x30
kunit_try_run_case+0xad/0xc0
kunit_generic_run_threadfn_adapter+0x26/0x50
kthread+0x17b/0x1b0
It was biscted to commit c7323a5ad0 ("mm/slub: restrict sysfs
validation to debug caches and make it safe")
The problem is inside free_debug_processing(), under certain
circumstances the slab can be removed from the partial list but not
freed by discard_slab() and thus n->nr_slabs is not decreased
accordingly. During shutdown, this non-zero n->nr_slabs is detected and
reported.
Specifically, the problem is that there are two checks for detecting a
full partial list by comparing n->nr_partial >= s->min_partial where the
latter check is affected by remove_partial() decreasing n->nr_partial
between the checks. Reoganize the code so there is a single check
upfront.
Link: https://lore.kernel.org/all/20220930100730.250248-1-feng.tang@intel.com/
Fixes: c7323a5ad0 ("mm/slub: restrict sysfs validation to debug caches and make it safe")
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
if io_uring sends passthrough command with IORING_URING_CMD_FIXED flag,
use the pre-registered buffer for IO (non-vectored variant). Pass the
buffer/length to io_uring and get the bvec iterator for the range. Next,
pass this bvec to block-layer and obtain a bio/request for subsequent
processing.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220930062749.152261-13-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a prep patch. Modify nvme_submit_user_cmd and
nvme_map_user_request to take ubuffer as plain integer
argument, and do away with nvme_to_user_ptr conversion in callers.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-12-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extend blk_rq_map_user_iov so that it can handle bvec iterator, using
the new blk_rq_map_user_bvec function. It maps the pages from bvec
iterator into a bio and place the bio into request.
This helper will be used by nvme for uring-passthrough path when IO is
done using pre-mapped buffers.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-11-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move bio allocation logic from bio_map_user_iov to a new helper
blk_rq_map_bio_alloc. It is named so because functionality is opposite
of what is done inside blk_mq_map_bio_put. This is a prep patch.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220930062749.152261-10-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme_alloc_request expects a large number of parameters.
Split this out into two functions to reduce number of parameters.
First one retains the name nvme_alloc_request, while second one is
named nvme_map_user_request.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-8-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass struct request rather than bio. It helps to kill a parameter, and
some processing clean-up too.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-7-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use the new blk_rq_map_user_io helper instead of duplicating code at
various places. Additionally this also takes advantage of the on-stack
iov fast path.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-5-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Create a helper blk_rq_map_user_io for mapping of vectored as well as
non-vectored requests. This will help in saving dupilcation of code at few
places in scsi and nvme.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220930062749.152261-4-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add IORING_URING_CMD_FIXED flag that is to be used for sending io_uring
command with previously registered buffers. User-space passes the buffer
index in sqe->buf_index, same as done in read/write variants that uses
fixed buffers.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220930062749.152261-3-anuj20.g@samsung.com
[axboe: shuffle valid flags check before acting on it]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is a new helper that callers can use to obtain a bvec iterator for
the previously mapped buffer. This is preparatory work to enable
fixed-buffer support for io_uring_cmd.
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20220930062749.152261-2-anuj20.g@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that the normal passthrough end_io path doesn't need the request
anymore, we can kill the explicit blk_mq_free_request() and just pass
back RQ_END_IO_FREE instead. This enables the batched completion from
freeing batches of requests at the time.
This brings passthrough IO performance at least on par with bdev based
O_DIRECT with io_uring. With this and batche allocations, peak performance
goes from 110M IOPS to 122M IOPS. For IRQ based, passthrough is now also
about 10% faster than previously, going from ~61M to ~67M IOPS.
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Co-developed-by: Stefan Roesch <shr@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
By splitting up the metadata and non-metadata end_io handling, we can
remove any request dependencies on the normal non-metadata IO path. This
is in preparation for enabling the normal IO passthrough path to pass
the ownership of the request back to the block layer.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Co-developed-by: Stefan Roesch <shr@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With end_io handlers now being able to potentially pass ownership of
the request upon completion, we can allow requests with end_io handlers
in the batch completion handling.
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Co-developed-by: Stefan Roesch <shr@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Everything is just converted to returning RQ_END_IO_NONE, and there
should be no functional changes with this patch.
In preparation for allowing the end_io handler to pass ownership back
to the block layer, rather than retain ownership of the request.
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The filesystem IO path can take advantage of allocating batches of
requests, if the underlying submitter tells the block layer about it
through the blk_plug. For passthrough IO, the exported API is the
blk_mq_alloc_request() helper, and that one does not allow for
request caching.
Wire up request caching for blk_mq_alloc_request(), which is generally
done without having a bio available upfront.
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>