Commit graph

1,189,500 commits

Author SHA1 Message Date
Christophe Leroy
691cdf016d powerpc: Rely on generic definition of hugepd_t and is_hugepd when unused
CONFIG_ARCH_HAS_HUGEPD is used to tell core mm when huge page
directories are used.

When they are not used, no need to provide hugepd_t or is_hugepd(),
just rely on the core mm fallback definition.

For that, change core mm behaviour so that CONFIG_ARCH_HAS_HUGEPD
is used instead of indirect is_hugepd macro existence.

powerpc being the only user of huge page directories, there is no
impact on other architectures.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/da81462d93069bb90fe5e762dd3283a644318937.1662543243.git.christophe.leroy@csgroup.eu
2022-09-26 20:58:18 +10:00
Christophe Leroy
a26494cf4a powerpc/nohash: Remove pgd_huge() stub
linux/hugetlb.h has a fallback pgd_huge() macro for when
pgd_huge is not defined.

Remove the powerpc redundant definitions.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ae6aa7fce84f7abcbf67f534271a4a6dd7949b0d.1662543243.git.christophe.leroy@csgroup.eu
2022-09-26 20:58:18 +10:00
Michael Ellerman
79c5640ab4 powerpc/mm/64s: Drop p4d_leaf()
Because 64-bit Book3S uses pgtable-nop4d.h, the P4D is folded into the
PGD. So P4D entries are actually PGD entries, or vice versa.

The other way to think of it is that the P4D is a single entry page
table below the PGD. Zero bits of the address are needed to index into
the P4D, therefore a P4D entry maps the same size address space as a PGD
entry.

As explained in the previous commit, there are no huge page sizes
supported directly at the PGD level on 64-bit Book3S, so there are also
no huge page sizes supported at the P4D level.

Therefore p4d_is_leaf() can never be true, so drop the definition and
fallback to the default implementation that always returns false.

Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220903123640.719846-2-mpe@ellerman.id.au
2022-09-26 20:58:18 +10:00
Michael Ellerman
51da853e37 powerpc/mm/64s: Drop pgd_huge()
On powerpc there are two ways for huge pages to be represented in the
top level page table, aka PGD (Page Global Directory).

If the address space mapped by an individual PGD entry does not
correspond to a given huge page size, then the PGD entry points to a
non-standard page table, known as a "hugepd" (Huge Page Directory).
The hugepd contains some number of huge page PTEs sufficient to map the
address space with the given huge page size.

On the other hand, if the address space mapped by an individual PGD
entry does correspond exactly to a given huge page size, that PGD entry
is used to directly encode the huge page PTE in place. In this case the
pgd_huge() wrapper indicates to generic code that the PGD entry is
actually a huge page PTE.

This commit deals with the pgd_huge() case only, it does nothing with
respect to the hugepd case.

Over time the size of the virtual address space supported on powerpc has
increased several times, which means the location at which huge pages
can sit in the tree has also changed. There have also been new huge page
sizes added, with the introduction of the Radix MMU.

On Power9 and later with the Radix MMU, the largest huge page size in
any implementation is 1GB.

Since the introduction of Radix, 1GB entries have been supported at the
PUD level, with both 4K and 64K base page size. Radix has never had a
supported huge page size at the PGD level.

On Power8 or earlier, which uses the Hash MMU, or Power9 or later with
the Hash MMU enabled, the largest huge page size is 16GB.

Using the Hash MMU and a base page size of 4K, 16GB has never been a
supported huge page size at the PGD level, due to the geometry being
incompatible. The two supported huge page sizes (16M & 16GB) both use
the hugepd format.

Using the Hash MMU and a base page size of 64K, 16GB pages were
supported in the past at the PGD level.

However in commit ba95b5d035 ("powerpc/mm/book3s/64: Rework page table
geometry for lower memory usage") the page table layout was reworked to
shrink the size of the PGD.

As a result the 16GB page size now fits at the PUD level when using 64K
base page size.

Therefore there are no longer any supported configurations where
pgd_huge() can be true, so drop the definitions for pgd_huge(), and
fallback to the generic definition which is always false.

Fixes: ba95b5d035 ("powerpc/mm/book3s/64: Rework page table geometry for lower memory usage")
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220903123640.719846-1-mpe@ellerman.id.au
2022-09-26 20:58:18 +10:00
Michael Ellerman
456c300510 powerpc/microwatt: Remove unused early debug code
The original microwatt submission[1] included some early debug code for
using the Microwatt "potato" UART.

The series that was eventually merged switched to using a standard UART,
and so doesn't need any special early debug handling. But some of the
original code was merged accidentally under the non-existent
CONFIG_PPC_EARLY_DEBUG_MICROWATT.

Drop the unused code.

1: https://lore.kernel.org/linuxppc-dev/20200509050340.GD1464954@thinks.paulus.ozlabs.org/

Fixes: 48b545b801 ("powerpc/microwatt: Use standard 16550 UART for console")
Reported-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220919052755.800907-1-mpe@ellerman.id.au
2022-09-26 20:58:17 +10:00
Michael Ellerman
e74611aa91 powerpc/64: Remove unused SYS_CALL_TABLE symbol
In interrupt_64.S, formerly entry_64.S, there are two toc entries
created for sys_call_table and compat_sys_call_table.

These are no longer used, since the system call entry was converted from
asm to C, so remove them.

Fixes: 68b34588e2 ("powerpc/64/sycall: Implement syscall entry/exit logic in C")
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220913124545.2817825-1-mpe@ellerman.id.au
2022-09-26 20:58:17 +10:00
Nicholas Piggin
fdfdcfd504 powerpc/build: put sys_call_table in .data.rel.ro if RELOCATABLE
Const function pointers by convention live in .data.rel.ro if they need
to be relocated. Now that .data.rel.ro is linked into the read-only
region, put them in the right section. This doesn't make much practical
difference, but it will make the C conversion of sys_call_table a
smaller change as far as linking goes.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916040755.2398112-8-npiggin@gmail.com
2022-09-26 20:58:17 +10:00
Nicholas Piggin
1e9eca485a powerpc/64/build: merge .got and .toc input sections
Follow the binutils ld internal linker script and merge .got and .toc
input sections in the .got output section.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916040755.2398112-7-npiggin@gmail.com
2022-09-26 20:58:17 +10:00
Nicholas Piggin
c787fed118 powerpc/64/build: only include .opd with ELFv1
ELFv2 does not use function descriptors so .opd is not required.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916040755.2398112-6-npiggin@gmail.com
2022-09-26 20:58:17 +10:00
Nicholas Piggin
b6adc6d6d3 powerpc/build: move .data.rel.ro, .sdata2 to read-only
.sdata2 is a readonly small data section for ppc32, and .data.rel.ro
is data that needs relocating but is read-only after that so these
can both be moved to the read only memory region.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916040755.2398112-5-npiggin@gmail.com
2022-09-26 20:58:17 +10:00
Nicholas Piggin
f21ba4499a powerpc/build: move got, toc, plt, branch_lt sections to read-only
This moves linker-related tables from .data to read-only area.
Relocations are performed at early boot time before memory is protected,
after which there should be no modifications required.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Don't use SPECIAL as reported by lkp@intel.com]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916040755.2398112-4-npiggin@gmail.com
2022-09-26 20:58:17 +10:00
Nicholas Piggin
1faa1235c1 powerpc/32/build: move got1/got2 sections out of text
Following the example from the binutils default linker script, move
.got1 and .got2 out of .text, to just after RO_DATA.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916040755.2398112-3-npiggin@gmail.com
2022-09-26 20:58:17 +10:00
Nicholas Piggin
7082f8e7d2 powerpc: move __end_rodata to cover arch read-only sections
powerpc has a number of read-only sections and tables that are put after
RO_DATA(). Move the __end_rodata symbol to cover these as well.

Setting memory to read-only at boot is done using __init_begin, change
that to use __end_rodata.

This makes is_kernel_rodata() exactly cover the read-only region, as
well as other things using __end_rodata (e.g., kernel/dma/debug.c).
Boot dmesg also prints the rodata size more accurately.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916040755.2398112-2-npiggin@gmail.com
2022-09-26 20:58:16 +10:00
Michael Ellerman
b150a4d12b powerpc/vmlinux.lds: Add an explicit symbol for the SRWX boundary
Currently __init_begin is used as the boundary for strict RWX between
executable/read-only text and data, and non-executable (after boot) code
and data.

But that's a little subtle, so add an explicit symbol to document that
the SRWX boundary lies there, and add a comment making it clear that
__init_begin must also begin there.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916131422.318752-2-mpe@ellerman.id.au
2022-09-26 20:58:16 +10:00
Michael Ellerman
331771e836 powerpc/vmlinux.lds: Ensure STRICT_ALIGN_SIZE is at least page aligned
Add a check that STRICT_ALIGN_SIZE is aligned to at least PAGE_SIZE.

That then makes the alignment to PAGE_SIZE immediately after the
alignment to STRICT_ALIGN_SIZE redundant, so remove it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916131422.318752-1-mpe@ellerman.id.au
2022-09-26 20:58:16 +10:00
Michael Ellerman
0c32903197 powerpc/64: Remove unused prom_init_toc symbols
Commit 24d33ac5b8 ("powerpc/64s: Make prom_init require RELOCATABLE")
made prom_init depend on CONFIG_RELOCATABLE.

But it missed cleaning up a case in the linker script for RELOCATABLE=n,
and associated symbols. Remove them now.

Fixes: 24d33ac5b8 ("powerpc/64s: Make prom_init require RELOCATABLE")
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220920131157.1032707-1-mpe@ellerman.id.au
2022-09-26 20:58:16 +10:00
Nicholas Piggin
9a10ccb29c powerpc/pseries: move hcall_tracepoint_refcount out of .toc
The .toc section is not really intended for arbitrary data. Writable
data in particular prevents making the TOC read-only after relocation.
Move hcall_tracepoint_refcount into the .data section.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220926053823.2668799-1-npiggin@gmail.com
2022-09-26 20:57:42 +10:00
Josef Bacik
857bc13f85 btrfs: implement a nowait option for tree searches
For NOWAIT IOCBs we'll need a way to tell search to not wait on locks
or anything.  Accomplish this by adding a path->nowait flag that will
use trylocks and skip reading of metadata, returning -EAGAIN in either
of these cases.  For now we only need this for reads, so only the read
side is handled.  Add an ASSERT() to catch anybody trying to use this
for writes so they know they'll have to implement the write side.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:46:42 +02:00
Uwe Kleine-König
a4d1846512 pxa: Drop if with an always false condition
The remove callback is only called after probe completed successfully.
In this case platform_set_drvdata() was called with a non-NULL argument
and so ssp is never NULL.

Also note that returning an error code from a remove callback doesn't
result in the device staying bound. It's still removed and devm
callbacks are called. So the memory that ssp pointed to during probe,
goes away without the node being removed from ssp_list. The probable
result of an early exit is accessing freed memory when the list is
walked the next time.

Signed-off-by: Uwe Kleine-König <(address hidden)>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-26 12:40:11 +02:00
Stefan Roesch
611df5d661 mm: export balance_dirty_pages_ratelimited_flags()
Export the function balance_dirty_pages_ratelimited_flags(). It is now
also called from btrfs.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Stefan Roesch <shr@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:07 +02:00
Qu Wenruo
d7f67ac9a9 btrfs: relax block-group-tree feature dependency checks
[BUG]
When one user did a wrong attempt to clear block group tree, which can
not be done through mount option, by using "-o clear_cache,space_cache=v2",
it will cause the following error on a fs with block-group-tree feature:

  BTRFS info (device dm-1): force clearing of disk cache
  BTRFS info (device dm-1): using free space tree
  BTRFS info (device dm-1): clearing free space tree
  BTRFS info (device dm-1): clearing compat-ro feature flag for FREE_SPACE_TREE (0x1)
  BTRFS info (device dm-1): clearing compat-ro feature flag for FREE_SPACE_TREE_VALID (0x2)
  BTRFS error (device dm-1): block-group-tree feature requires fres-space-tree and no-holes
  BTRFS error (device dm-1): super block corruption detected before writing it to disk
  BTRFS: error (device dm-1) in write_all_supers:4318: errno=-117 Filesystem corrupted (unexpected superblock corruption detected)
  BTRFS warning (device dm-1: state E): Skipping commit of aborted transaction.

[CAUSE]
Although the dependency for block-group-tree feature is just an
artificial one (to reduce test matrix), we put the dependency check into
btrfs_validate_super().

This is too strict, and during space cache clearing, we will have a
window where free space tree is cleared, and we need to commit the super
block.

In that window, we had block group tree without v2 cache, and triggered
the artificial dependency check.

This is not necessary at all, especially for such a soft dependency.

[FIX]
Introduce a new helper, btrfs_check_features(), to do all the runtime
limitation checks, including:

- Unsupported incompat flags check

- Unsupported compat RO flags check

- Setting missing incompat flags

- Artificial feature dependency checks
  Currently only block group tree will rely on this.

- Subpage runtime check for v1 cache

With this helper, we can move quite some checks from
open_ctree()/btrfs_remount() into it, and just call it after
btrfs_parse_options().

Now "-o clear_cache,space_cache=v2" will not trigger the above error
anymore.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ edit messages ]
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:07 +02:00
Qu Wenruo
5467abba1c btrfs: move end_io_func argument to btrfs_bio_ctrl structure
For function submit_extent_page() and alloc_new_bio(), we have an
argument @end_io_func to indicate the end io function.

But that function never change inside any call site of them, thus no
need to pass the pointer around everywhere.

There is a better match for the lifespan of all the call sites, as we
have btrfs_bio_ctrl structure, thus we can put the endio function
pointer there, and grab the pointer every time we allocate a new bio.

Also add extra ASSERT()s to make sure every call site of
submit_extent_page() and alloc_new_bio() has properly set the pointer
inside btrfs_bio_ctrl.

This removes one argument from the already long argument list of
submit_extent_page().

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:07 +02:00
Qu Wenruo
209ecde55c btrfs: switch page and disk_bytenr argument position for submit_extent_page()
Normally we put (page, pg_len, pg_offset) arguments together, just like
what __bio_add_page() does.

But in submit_extent_page(), what we got is, (page, disk_bytenr, pg_len,
pg_offset), which sometimes can be confusing.

Change the order to (disk_bytenr, page, pg_len, pg_offset) to make it
to follow the common schema.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:07 +02:00
Qu Wenruo
814b6f9158 btrfs: update the comment for submit_extent_page()
Since commit 390ed29b81 ("btrfs: refactor submit_extent_page() to make
bio and its flag tracing easier"), we are using bio_ctrl structure to
replace some of arguments of submit_extent_page().

But unfortunately that commit didn't update the comment for
submit_extent_page(), thus some arguments are stale like:

- bio_ret
- mirror_num
  Those are all contained in bio_ctrl now.

- prev_bio_flags
  We no longer use this flag to determine if we can merge bios.

Update the comment for submit_extent_page() to keep it up-to-date.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:07 +02:00
Josef Bacik
d692173944 btrfs: add struct declarations in dev-replace.h
dev-replace.h just has function prototypes for device replace, however
if you happen to include it in the wrong order you'll get compile errors
because of different structures not being defined.  Since these are just
pointer args to functions we can declare them at the top in order to
reduce the pain of using the header.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:07 +02:00
Josef Bacik
9b9b885465 btrfs: use a runtime flag to indicate an inode is a free space inode
We always check the root of an inode as well as it's inode number to
determine if it's a free space inode.  This is problematic as the helper
is in a header file where it doesn't have the fs_info definition.  To
avoid this and make the check a little cleaner simply add a flag to the
runtime_flags to indicate that the inode is a free space inode, set that
when we create the inode, and then change the helper to check for this
flag.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:07 +02:00
Josef Bacik
e256927b88 btrfs: open code and remove btrfs_insert_inode_hash helper
This exists to insert the btree_inode in the super blocks inode hash
table.  Since it's only used for the btree inode move the code to where
we use it in disk-io.c and remove the helper.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:06 +02:00
Josef Bacik
ee8ba05cbb btrfs: open code and remove btrfs_inode_sectorsize helper
This is defined in btrfs_inode.h, and dereferences btrfs_root and
btrfs_fs_info, both of which aren't defined in btrfs_inode.h.
Additionally, in many places we already have root or fs_info, so this
helper often makes the code harder to read.  So delete the helper and
simply open code it in the few places that we use it.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:06 +02:00
Josef Bacik
2b6433c7f6 btrfs: move btrfs_ordered_sum_size into file-item.c
This is defined in ordered-data.h, but is only used in file-item.c.
Move this to file-item.c as it doesn't need to be global.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:06 +02:00
Josef Bacik
d9d88fde56 btrfs: move the fs_info related helpers closer to fs_info in ctree.h
This is purely cosmetic, to make it straightforward to copy and paste
the definition and helpers from ctree.h into fs.h.  These are helpers
that act directly on the fs_info, and were scattered throughout ctree.h.
Move them directly below the fs_info definition to make it easier to
move them later.  This includes the exclop prototypes, which shares an
enum that's used in struct btrfs_fs_info as well.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:06 +02:00
Josef Bacik
f119553fd3 btrfs: move btrfs_csum_ptr to inode.c
This helper is only used in inode.c, move it locally to that file
instead of defining it in ctree.h.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:06 +02:00
Josef Bacik
0e75f0054a btrfs: move fs_info forward declarations to the top of ctree.h
In order to make it more straightforward to move the fs_info struct and
it's related structures, move the struct declarations to the top of
ctree.h.  This will make it easier to clean up after the fact.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:06 +02:00
Josef Bacik
2103da3b0e btrfs: move btrfs_swapfile_pin into volumes.h
This isn't a great spot for this, but one of the swapfile helper
functions is in volumes.c, so move the struct to volumes.h.  In the
future when we have better separation of code there will be a more
natural spot for this.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:06 +02:00
Josef Bacik
c2e79e865b btrfs: move btrfs_pinned_by_swapfile prototype into volumes.h
This is defined in volumes.c, move the prototype into volumes.h.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:06 +02:00
Josef Bacik
43712116f8 btrfs: move btrfs_init_async_reclaim_work prototype to space-info.h
The code for this helper is in space-info.c, move the prototype to
space-info.h.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:06 +02:00
Josef Bacik
c29abab4f9 btrfs: move btrfs_full_stripe_locks_tree into block-group.h
This is actually embedded in struct btrfs_block_group, so move this
definition to block-group.h, and then open-code the init of the tree
where we init the rest of the block group instead of using a helper.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:06 +02:00
Josef Bacik
16708a8898 btrfs: move btrfs_caching_type to block-group.h
This is a block group related definition, move it into block-group.h.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:06 +02:00
Christoph Hellwig
bd86a532b2 btrfs: stop tracking failed reads in the I/O tree
There is a separate I/O failure tree to track the fail reads, so remove
the extra EXTENT_DAMAGED bit in the I/O tree as it's set but never used.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:05 +02:00
Josef Bacik
23408d8196 btrfs: remove is_data_inode() checks in extent-io-tree.c
We're only initializing extent_io_tree's with a private data if we're a
normal inode, so we don't need this extra check.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:05 +02:00
Josef Bacik
efb0645bd9 btrfs: don't init io tree with private data for non-inodes
We only use this for normal inodes, so don't set it if we're not a
normal inode.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:05 +02:00
Josef Bacik
bd015294af btrfs: replace delete argument with EXTENT_CLEAR_ALL_BITS
Instead of taking up a whole argument to indicate we're clearing
everything in a range, simply add another EXTENT bit to control this,
and then update all the callers to drop this argument from the
clear_extent_bit variants.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:05 +02:00
Josef Bacik
b71fb16b2f btrfs: don't clear CTL bits when trying to release extent state
When trying to release the extent states due to memory pressure we'll
set all the bits except LOCKED, NODATASUM, and DELALLOC_NEW.  This
includes some of the CTL bits, which isn't really a problem but isn't
correct either.  Exclude the CTL bits from this clearing.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:05 +02:00
Josef Bacik
71528e9e16 btrfs: get rid of extent_io_tree::dirty_bytes
This was used as an optimization for count_range_bits(EXTENT_DIRTY),
which was used by the failed record code.  However this was removed in
this series by patch "btrfs: convert the io_failure_tree to a plain
rb_tree" which was the last user of this optimization.  Remove the
->dirty_bytes as nobody cares anymore.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:05 +02:00
Josef Bacik
4374d03d21 btrfs: remove extent_io_tree::track_uptodate
Since commit 78361f64ff42 ("btrfs: remove unnecessary EXTENT_UPTODATE
state in buffered I/O path") we no longer check ->track_uptodate, remove
it.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:05 +02:00
Josef Bacik
570eb97bac btrfs: unify the lock/unlock extent variants
We have two variants of lock/unlock extent, one set that takes a cached
state, another that does not.  This is slightly annoying, and generally
speaking there are only a few places where we don't have a cached state.
Simplify this by making lock_extent/unlock_extent the only variant and
make it take a cached state, then convert all the callers appropriately.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:05 +02:00
Josef Bacik
291bbb1e7e btrfs: drop extent_changeset from set_extent_bit
The only places that set extent_changeset is set_record_extent_bits,
everywhere else sets it to NULL.  Drop this argument from
set_extent_bit.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:05 +02:00
Josef Bacik
994bcd1eae btrfs: remove failed_start argument from set_extent_bit
This is only used for internal locking related helpers, everybody else
just passes in NULL.  I've changed set_extent_bit to __set_extent_bit
and made it static, removed failed_start from set_extent_bit and have it
call __set_extent_bit with a NULL failed_start, and I've moved some code
down below the now static __set_extent_bit.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:05 +02:00
Josef Bacik
dbbf49928f btrfs: remove the wake argument from clear_extent_bits
This is only used in the case that we are clearing EXTENT_LOCKED, so
infer this value from the bits passed in instead of taking it as an
argument.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:04 +02:00
Josef Bacik
c07d1004c5 btrfs: drop exclusive_bits from set_extent_bit
This is only ever set if we have EXTENT_LOCKED set, so simply push this
into the function itself and remove the function argument.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:04 +02:00
Josef Bacik
d6f65c27f5 btrfs: move extent io tree unrelated prototypes to their appropriate header
These prototypes have nothing to do with the extent_io_tree helpers,
move them to their appropriate header.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:04 +02:00