This patch adds the get_vq_state and set_vq_state vDPA callbacks.
In order to get the VQ state, the state needs to be read from the DPU.
In order to allow that, the old messaging mechanism is replaced with a new,
flexible control mechanism.
This mechanism allows to read data from the DPU.
The mechanism can be used if the negotiated config version is 2 or
higher.
If the new mechanism is used when the config version is 1, it will call
snet_send_ctrl_msg_old, which is config 1 compatible.
Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Message-Id: <20230413073337.31367-2-alvaro.karsz@solid-run.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
vringh.h doesn't seem to belong to any section in MAINTAINERS.
Add it to Virtio Core and Net Drivers, which seems to be the most
appropriate section to me.
Signed-off-by: Simon Horman <horms@kernel.org>
Message-Id: <20230331-vhost-fixes-v1-3-1f046e735b9e@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Address some minor kdoc warnings in vring.h.
* Place kdoc for 'struct vringh_config_ops' immediately before the structure
* Add missing documentation of members of 'vringh_iov' and 'vringh_kiov'
Warnings flagged by:
$ ./scripts/kernel-doc -none include/linux/vringh.h
include/linux/vringh.h:68: error: Cannot parse struct or union!
include/linux/vringh.h:92: warning: Function parameter or member 'iov' not described in 'vringh_iov'
include/linux/vringh.h:92: warning: Function parameter or member 'consumed' not described in 'vringh_iov'
include/linux/vringh.h:92: warning: Function parameter or member 'i' not described in 'vringh_iov'
include/linux/vringh.h:92: warning: Function parameter or member 'used' not described in 'vringh_iov'
include/linux/vringh.h:92: warning: Function parameter or member 'max_num' not described in 'vringh_iov'
include/linux/vringh.h:104: warning: Function parameter or member 'iov' not described in 'vringh_kiov'
include/linux/vringh.h:104: warning: Function parameter or member 'consumed' not described in 'vringh_kiov'
include/linux/vringh.h:104: warning: Function parameter or member 'i' not described in 'vringh_kiov'
include/linux/vringh.h:104: warning: Function parameter or member 'used' not described in 'vringh_kiov'
include/linux/vringh.h:104: warning: Function parameter or member 'max_num' not described in 'vringh_kiov'
Signed-off-by: Simon Horman <horms@kernel.org>
Message-Id: <20230331-vhost-fixes-v1-2-1f046e735b9e@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch addresses the following minor kdoc problems.
* Incorrect spelling of 'callback' and 'notification'
* Unrecognised kdoc format for 'struct vdpa_map_file'
* Missing documentation of 'get_vendor_vq_stats' member of
'struct vdpa_config_ops'
* Missing documentation of 'max_supported_vqs' and 'supported_features'
members of 'struct vdpa_mgmt_dev'
Most of these problems were flagged by:
$ ./scripts/kernel-doc -Werror -none include/linux/vdpa.h
include/linux/vdpa.h:20: warning: expecting prototype for struct vdpa_calllback. Prototype was for struct vdpa_callback instead
include/linux/vdpa.h:117: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Corresponding file area for device memory mapping
include/linux/vdpa.h:357: warning: Function parameter or member 'get_vendor_vq_stats' not described in 'vdpa_config_ops'
include/linux/vdpa.h:518: warning: Function parameter or member 'supported_features' not described in 'vdpa_mgmt_dev'
include/linux/vdpa.h:518: warning: Function parameter or member 'max_supported_vqs' not described in 'vdpa_mgmt_dev'
The misspelling of 'notification' was flagged by:
$ ./scripts/checkpatch.pl --codespell --showfile --strict -f include/linux/vdpa.h
include/linux/vdpa.h:171: CHECK: 'notifcation' may be misspelled - perhaps 'notification'?
...
Signed-off-by: Simon Horman <horms@kernel.org>
Message-Id: <20230331-vhost-fixes-v1-1-1f046e735b9e@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
In virtio_net, if we disable napi_tx, when we trigger a tx interrupt,
the vq->event_triggered will be set to true. It is then never reset
until we explicitly call virtqueue_enable_cb_delayed or
virtqueue_enable_cb_prepare.
If we disable the napi_tx, virtqueue_enable_cb* will only be called when
the tx ring is getting relatively empty.
Since event_triggered is true, VRING_AVAIL_F_NO_INTERRUPT or
VRING_PACKED_EVENT_FLAG_DISABLE will not be set. As a result we update
vring_used_event(&vq->split.vring) or vq->packed.vring.driver->off_wrap
every time we call virtqueue_get_buf_ctx. This causes more interrupts.
To summarize:
1) event_triggered was set to true in vring_interrupt()
2) after this nothing will happen in virtqueue_disable_cb() so
VRING_AVAIL_F_NO_INTERRUPT is not set in avail_flags_shadow
3) virtqueue_get_buf_ctx_split() will still think the cb is enabled
and then it will publish a new event index
To fix:
update VRING_AVAIL_F_NO_INTERRUPT or VRING_PACKED_EVENT_FLAG_DISABLE in
the vq when we call virtqueue_disable_cb even when event_triggered is
true.
Tested with iperf:
iperf3 tcp stream:
vm1 -----------------> vm2
vm2 just receives tcp data stream from vm1, and sends acks to vm1,
there are many tx interrupts in vm2.
with the patch applied there are just a few tx interrupts.
v2->v3:
-update the interrupt disable flag even with the event_triggered is set,
-instead of checking whether event_triggered is set in
-virtqueue_get_buf_ctx_{packed/split}, will cause the drivers which have
-not called virtqueue_{enable/disable}_cb to miss notifications.
v3->v4:
-remove change for
-"if (vq->packed.event_flags_shadow != VRING_PACKED_EVENT_FLAG_DISABLE)"
-in virtqueue_disable_cb_packed
Fixes: 8d622d21d2 ("virtio: fix up virtio_disable_cb")
Signed-off-by: Albert Huang <huangjie.albert@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230329102300.61000-1-huangjie.albert@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The new "use_va" module parameter (default: true) is used in
vdpa_alloc_device() to inform the vDPA framework that the device
supports VA.
vringh is initialized to use VA only when "use_va" is true and the
user's mm has been bound. So, only when the bus supports user VA
(e.g. vhost-vdpa).
vdpasim_mm_work_fn work is used to serialize the binding to a new
address space when the .bind_mm callback is invoked, and unbinding
when the .unbind_mm callback is invoked.
Call mmget_not_zero()/kthread_use_mm() inside the worker function
to pin the address space only as long as needed, following the
documentation of mmget() in include/linux/sched/mm.h:
* Never use this function to pin this address space for an
* unbounded/indefinite amount of time.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230404131734.45943-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The spinlock we use to protect the state of the simulator is sometimes
held for a long time (for example, when devices handle requests).
This also prevents us from calling functions that might sleep (such as
kthread_flush_work() in the next patch), and thus having to release
and retake the lock.
For these reasons, let's replace the spinlock with a mutex that gives
us more flexibility.
Suggested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230404131730.45920-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's use our own kthread to run device jobs.
This allows us more flexibility, especially we can attach the kthread
to the user address space when vDPA uses user's VA.
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230404131725.45908-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Let's move work management inside the vdpa_sim core.
This way we can easily change how we manage the works, without
having to change the devices each time.
Acked-by: Eugenio Pérez Martin <eperezma@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230404131721.45886-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
vDPA supports the possibility to use user VA in the iotlb messages.
So, let's add support for user VA in vringh to use it in the vDPA
simulators.
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230404131716.45855-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Define a macro to be reused in the different parts of the code.
Useful for the next patches where we add more arrays to manage also
translations with user VA.
Suggested-by: Eugenio Perez Martin <eperezma@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230404131326.44403-5-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
kmap_atomic() is deprecated in favor of kmap_local_page() since commit
f3ba3c710a ("mm/highmem: Provide kmap_local*").
With kmap_local_page() the mappings are per thread, CPU local, can take
page-faults, and can be called from any context (including interrupts).
Furthermore, the tasks can be preempted and, when they are scheduled to
run again, the kernel virtual addresses are restored and still valid.
kmap_atomic() is implemented like a kmap_local_page() which also disables
page-faults and preemption (the latter only for !PREEMPT_RT kernels,
otherwise it only disables migration).
The code within the mappings/un-mappings in getu16_iotlb() and
putu16_iotlb() don't depend on the above-mentioned side effects of
kmap_atomic(), so that mere replacements of the old API with the new one
is all that is required (i.e., there is no need to explicitly add calls
to pagefault_disable() and/or preempt_disable()).
This commit reuses a "boiler plate" commit message from Fabio, who has
already did this change in several places.
Cc: "Fabio M. De Francesco" <fmdefrancesco@gmail.com>
Reviewed-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230404131326.44403-4-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the user call VHOST_SET_OWNER ioctl and the vDPA device
has `use_va` set to true, let's call the bind_mm callback.
In this way we can bind the device to the user address space
and directly use the user VA.
The unbind_mm callback is called during the release after
stopping the device.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230404131326.44403-3-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
These new optional callbacks is used to bind/unbind the device to
a specific address space so the vDPA framework can use VA when
these callbacks are implemented.
Suggested-by: Jason Wang <jasowang@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230404131326.44403-2-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace `userpace` with `userspace`.
Cc: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20230331080208.17002-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
As discussed in [1], this adds sysfs interface to support
specifying bounce buffer size in virtio-vdpa case. It would
be a performance tuning parameter for high throughput workloads.
[1] https://lore.kernel.org/netdev/e8f25a35-9d45-69f9-795d-bdbbb90337a3@redhat.com/
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230323053043.35-12-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Delay creating iova domain until the vduse device is
registered to vdpa bus.
This is a preparation for adding sysfs interface to
support specifying bounce buffer size for the iova
domain.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230323053043.35-11-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now the vdpa callback will associate an trigger
eventfd in some cases. For performance reasons,
VDUSE can signal it directly during irq injection.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230323053043.35-10-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add eventfd for the vdpa callback so that user
can signal it directly instead of triggering the
callback. It will be used for vhost-vdpa case.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20230323053043.35-9-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Add sysfs interface for each vduse virtqueue to
get/set the affinity for irq callback. This might
be useful for performance tuning when the irq callback
affinity mask contains more than one CPU.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20230323053043.35-8-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This implements get_vq_affinity callback so that
the virtio-blk driver can build the blk-mq queues
based on the irq callback affinity.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20230323053043.35-7-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Since virtio-vdpa bus driver already support interrupt
affinity spreading mechanism, let's implement the
set_vq_affinity callback to bring it to vduse device.
After we get the virtqueue's affinity, we can spread
IRQs between CPUs in the affinity mask, in a round-robin
manner, to run the irq callback.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20230323053043.35-6-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Allocate memory for vduse virtqueues one by one instead of
doing one allocation for all of them.
This is a preparation for adding sysfs interface for virtqueues.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230323053043.35-5-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To support interrupt affinity spreading mechanism,
this makes use of group_cpus_evenly() to create
an irq callback affinity mask for each virtqueue
of vdpa device. Then we will unify set_vq_affinity
callback to pass the affinity to the vdpa device driver.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Message-Id: <20230323053043.35-4-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
This introduces set/get_vq_affinity callbacks in
vdpa_config_ops to support virtqueue affinity
management for vdpa device drivers.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230323053043.35-3-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Export group_cpus_evenly() so that some modules
can make use of it to group CPUs evenly according
to NUMA and CPU locality.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20230323053043.35-2-xieyongji@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extend the possible list for features that can be supported by firmware.
Note that different versions of firmware may or may not support these
features. The driver is made aware of them by querying the firmware.
While doing this, improve the code so we use enum names instead of hard
coded numerical values.
The new features supported by the driver are the following:
VIRTIO_NET_F_MRG_RXBUF
VIRTIO_NET_F_HOST_ECN
VIRTIO_NET_F_GUEST_ECN
VIRTIO_NET_F_GUEST_TSO6
VIRTIO_NET_F_GUEST_TSO4
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20230321112809.221432-3-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Eugenio Pérez Martin <eperezma@redhat.com>
Following patch adds driver support for VIRTIO_NET_F_MRG_RXBUF.
Current firmware versions show degradation in packet rate when using
MRG_RXBUF. Users who favor memory saving over packet rate could enable
this feature but we want to keep it off by default.
One can still enable it when creating the vdpa device using vdpa tool by
providing features that include it.
For example:
$ vdpa dev add name vdpa0 mgmtdev pci/0000:86:00.2 device_features 0x300cb982b
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20230321112809.221432-2-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Si-Wei Liu <si-wei.liu@oracle.com>
According to the Virtio Specification, the Queue Size parameter of a
virtqueue corresponds to the maximum number of descriptors in that
queue, and it does not have to be a power of 2 for packed virtqueues.
However, the virtio_pci_modern driver enforced a power of 2 check for
virtqueue sizes, which is unnecessary and restrictive for packed
virtuqueue.
Split virtqueue still needs to check the virtqueue size is power_of_2
which has been done in vring_alloc_queue_split of the virtio_ring layer.
To validate this change, we tested various virtqueue sizes for packed
rings, including 128, 256, 512, 100, 200, 500, and 1000, with
CONFIG_PAGE_POISONING enabled, and all tests passed successfully.
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Message-Id: <20230315185458.11638-2-feliu@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We on longer need to hold the vhost_scsi_mutex the entire time we
set/clear the endpoint. The tv_tpg_mutex handles tpg accesses not related
to the tpg list, the port link/unlink functions use the tv_tpg_mutex while
accessing the tpg->vhost_scsi pointer, vhost_scsi_do_plug will no longer
queue events after the virtqueue's backend has been cleared and flushed,
and we don't drop our refcount to the tpg until after we have stopped
cmds and wait for outstanding cmds to complete.
This moves the vhost_scsi_mutex use to it's documented use of being used
to access the tpg list. We then don't need to hold it while a flush is
being performed causing other device's vhost_scsi_set_endpoint
and vhost_scsi_make_tpg/vhost_scsi_drop_tpg calls to have to wait on a
flakey device.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230321020624.13323-8-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We are using the vhost_scsi_mutex to make sure vhost_scsi_port_link and
vhost_scsi_port_unlink see if vhost_scsi_clear_endpoint has cleared
tpg->vhost_scsi and it can't be freed while they are using.
However, we currently set the tpg->vhost_scsi pointer while holding
tv_tpg_mutex. So, we can just hold that while calling
vhost_scsi_hotplug/hotunplug. We then don't need to hold the
vhost_scsi_mutex while vhost_scsi_clear_endpoint is holding it and doing
a flush which could cause the LUN map/unmap to have to wait on another
device's flush.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230321020624.13323-7-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We currenly hold the vhost_scsi_mutex while clearing the endpoint and
while performing vhost_scsi_do_plug, so tpg->vhost_scsi can't be freed
from uder us, and to make sure anything queued is handled by the
full call in vhost_scsi_clear_endpoint.
This patch removes the need for the vhost_scsi_mutex for the latter
case. In the next patches, we won't hold the vhost_scsi_mutex while
flushing so this patch adds a check for the clearing of the virtqueue
from vhost_scsi_clear_endpoint. We then know that once
vhost_scsi_clear_endpoint has cleared the backend that no new events
will be queued, and the flush after the vhost_vq_set_backend(vq, NULL)
call will see everything that's been queued to that point. So the flush
will then handle all events without the need for the vhost_scsi_mutex.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230321020624.13323-6-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We don't need the device mutex in vhost_scsi_do_plug because:
1. we have the vhost_scsi_mutex so the tpg->vhost_scsi pointer will not
change on us and the vhost_scsi can't be freed from under us if it was
set.
2. vhost_scsi_clear_endpoint will stop the virtqueues and flush them while
holding the vhost_scsi_mutex so we know once vhost_scsi_clear_endpoint
has completed that vhost_scsi_do_plug can't send new events and any
queued ones have completed.
So this patch drops the device mutex use in vhost_scsi_do_plug.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230321020624.13323-5-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We currently hold the vhost_scsi_mutex the entire time we are running
vhost_scsi_clear_endpoint. One of the reasons for this is that it prevents
userspace from being able to free the se_tpg from under us after we have
called target_undepend_item. However, it forces management operations for
for other devices to have to wait on a flakey device's:
vhost_scsi_clear_endpoint -> vhost_scsi_flush()
call which can which can take a long time.
This moves the target_undepend_item call and the tpg unsetup code to after
we have stopped new IO from starting up and after we have waited on
running IO. We can then release our refcount on the tpg and session
knowing our device is no longer accessing them. We can then drop the
vhost_scsi_mutex use during thee flush call in later patches in this set,
when we have removed other reasons for holding it.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230321020624.13323-4-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add const to make the read-only pointer parameters clear, similar to
many existing functions.
To implement this change, the commit also introduces the use of
`container_of_const` to implement `to_vvq`, which ensures the const-ness
of read-only parameters and avoids accidental modification of their
members.
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Message-Id: <20230310053428.3376-4-feliu@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to kernel coding style [1], defining inline functions is not
necessary and beneficial for simple functions. Hence clean up the code
by removing the inline keyword.
It is verified with GCC 12.2.0, the generated code with/without inline
is same. Additionally tested with pktgen and iperf, and verified the
result, the pps test results are the same in the cases of with/without
inline.
Iperf and pps of pktgen for virtio-net didn't change before and after
the change.
[1]
https://www.kernel.org/doc/html/v6.2-rc3/process/coding-style.html#the-inline-disease
Signed-off-by: Feng Liu <feliu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20230310053428.3376-3-feliu@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When we get help information, we should return directly, and we should not
execute test cases. Move the exit() directly into the help() function and
remove it from case '?'.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Message-Id: <tencent_822CEBEB925205EA1573541CD1C2604F4805@qq.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Replace eight spaces with Tab.
Signed-off-by: Rong Tao <rtoax@foxmail.com>
Message-Id: <tencent_89579C514BC4020324A1A4ACA44B5B95BB07@qq.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Group some variables based on their sizes to reduce hole and avoid padding.
On x86_64, this shrinks the size of 'struct virtqueue'
from 72 to 68 bytes.
It saves a few bytes of memory.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <8f3d2e49270a2158717e15008e7ed7228196ba02.1676707807.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Peter Lafreniere <peter@n8pjl.ca>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
The vhost_get_avail_size and vhost_get_used_size functions compute the size
of structures with flexible array members with an additional 2 bytes if the
VIRTIO_RING_F_EVENT_IDX feature flag is set. Convert these functions to use
struct_size() and size_add() instead of coding the calculation by hand.
This ensures that the calculations will saturate at SIZE_MAX rather than
overflowing.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: kvm@vger.kernel.org
Message-Id: <20230227214127.3678392-1-jacob.e.keller@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Current code ignores link state updates if VIRTIO_NET_F_STATUS was not
negotiated. However, link state updates could be received before feature
negotiation was completed , therefore causing link state events to be
lost, possibly leaving the link state down.
Modify the code so link state notifier is registered after DRIVER_OK was
negotiated and carry the registration only if
VIRTIO_NET_F_STATUS was negotiated. Unregister the notifier when the
device is reset.
Fixes: 033779a708 ("vdpa/mlx5: make MTU/STATUS presence conditional on feature bits")
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20230417110343.138319-1-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At the stage of direction checks, the netdev reference tracker is
already initialized, but released with wrong *_put() call.
Fixes: 919e43fad5 ("xfrm: add an interface to offload policy")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Failure to add offloaded policy will cause to the following
error once user will try to reload driver.
Unregister_netdevice: waiting for eth3 to become free. Usage count = 2
This was caused by xfrm_dev_policy_add() which increments reference
to net_device. That reference was supposed to be decremented
in xfrm_dev_policy_free(). However the latter wasn't called.
unregister_netdevice: waiting for eth3 to become free. Usage count = 2
leaked reference.
xfrm_dev_policy_add+0xff/0x3d0
xfrm_policy_construct+0x352/0x420
xfrm_add_policy+0x179/0x320
xfrm_user_rcv_msg+0x1d2/0x3d0
netlink_rcv_skb+0xe0/0x210
xfrm_netlink_rcv+0x45/0x50
netlink_unicast+0x346/0x490
netlink_sendmsg+0x3b0/0x6c0
sock_sendmsg+0x73/0xc0
sock_write_iter+0x13b/0x1f0
vfs_write+0x528/0x5d0
ksys_write+0x120/0x150
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fixes: 919e43fad5 ("xfrm: add an interface to offload policy")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Some powernv machines use IGB for networking, so build the driver in to
enable net booting such machines.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230420052149.1328094-1-mpe@ellerman.id.au
Unlikely that anyone is still regularly using JFS, drop it from the
defconfig.
Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230420051609.1324201-2-mpe@ellerman.id.au
Rather than trying to keep multiple configs up to date, make
pseries_defconfig an alias for ppc64le_guest_defconfig.
NOTE, pseries_defconfig was a big endian config, but this commit
switches it to little endian.
Almost all distros are ppc64le these days, so little endian is much more
likely to be what a user wants when they build for "pseries".
For an actual big endian guest, use ppc64_guest_defconfig.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-32-mpe@ellerman.id.au
Rather than trying to keep multiple configs up to date, make
pseries_le_defconfig an alias for ppc64le_guest_defconfig.
ppc64le_guest_defconfig should work in all cases that
pseries_le_defconfig currently does, but if not we can update it.
Move pseries_le_defconfig down in the Makefile, so it appears after
ppc64le_guest_defconfig in the help output.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-31-mpe@ellerman.id.au
Incorporate the generic kvm_guest.config into the powerpc guest configs,
ppc64[le]_guest_defconfig.
This brings in some useful options, in particular 9P support, and also
means future additions to the generic file will be automatically picked
up by the powerpc configs.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-30-mpe@ellerman.id.au
These drivers are sometimes required to have functional networking in a
guest, so build them in when building ppc64[le]_guest_defconfig.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230414132415.821564-29-mpe@ellerman.id.au
