Tracing BPF programs can attach to kprobe and fentry. Hence they
run in unknown context where calling plain kmalloc() might not be safe.
Front-end kmalloc() with minimal per-cpu cache of free elements.
Refill this cache asynchronously from irq_work.
BPF programs always run with migration disabled.
It's safe to allocate from cache of the current cpu with irqs disabled.
Free-ing is always done into bucket of the current cpu as well.
irq_work trims extra free elements from buckets with kfree
and refills them with kmalloc, so global kmalloc logic takes care
of freeing objects allocated by one cpu and freed on another.
struct bpf_mem_alloc supports two modes:
- When size != 0 create kmem_cache and bpf_mem_cache for each cpu.
This is typical bpf hash map use case when all elements have equal size.
- When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on
kmalloc/kfree. Max allocation size is 4096 in this case.
This is bpf_dynptr and bpf_kptr use case.
bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree.
bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free.
The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
The commit 7d7672bc5d ("btrfs: convert count_max_extents() to use
fs_info->max_extent_size") introduced a division by
fs_info->max_extent_size. This max_extent_size is initialized with max
zone append limit size of the device btrfs runs on. However, in zone
emulation mode, the device is not zoned then its zone append limit is
zero. This resulted in zero value of fs_info->max_extent_size and caused
zero division error.
Fix the error by setting non-zero pseudo value to max append zone limit
in zone emulation mode. Set the pseudo value based on max_segments as
suggested in the commit c2ae7b772e ("btrfs: zoned: revive
max_zone_append_bytes").
Fixes: 7d7672bc5d ("btrfs: convert count_max_extents() to use fs_info->max_extent_size")
CC: stable@vger.kernel.org # 5.12+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The commit 2ce543f478 ("btrfs: zoned: wait until zone is finished when
allocation didn't progress") implemented a zone finish waiting mechanism
to the write path of zoned mode. However, using
wait_var_event()/wake_up_all() on fs_info->zone_finish_wait is wrong and
wait_var_event() just hangs because no one ever wakes it up once it goes
into sleep.
Instead, we can simply use wait_on_bit_io() and clear_and_wake_up_bit()
on fs_info->flags with a proper barrier installed.
Fixes: 2ce543f478 ("btrfs: zoned: wait until zone is finished when allocation didn't progress")
CC: stable@vger.kernel.org # 5.16+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add 1000BASE-KX interface mode. This 1G backplane ethernet as described in
clause 70. Clause 73 autonegotiation is mandatory, and only full duplex
operation is supported.
Although at the PMA level this interface mode is identical to
1000BASE-X, it uses a different form of in-band autonegation. This
justifies a separate interface mode, since the interface mode (along
with the MLO_AN_* autonegotiation mode) sets the type of autonegotiation
which will be used on a link. This results in more than just electrical
differences between the link modes.
With regard to 1000BASE-X, 1000BASE-KX holds a similar position to
SGMII: same signaling, but different autonegotiation. PCS drivers
(which typically handle in-band autonegotiation) may only support
1000BASE-X, and not 1000BASE-KX. Similarly, the phy mode is used to
configure serdes phys with phy_set_mode_ext. Due to the different
electrical standards (SFI or XFI vs Clause 70), they will likely want to
use different configuration. Adding a phy interface mode for
1000BASE-KX helps simplify configuration in these areas.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Anderson says:
====================
net: dpaa: Cleanups in preparation for phylink conversion (part 2)
This series contains several cleanup patches for dpaa/fman. While they
are intended to prepare for a phylink conversion, they stand on their
own. This series was originally submitted as part of [1].
[1] https://lore.kernel.org/netdev/20220715215954.1449214-1-sean.anderson@seco.com
Changes in v5:
- Reduce line length of tgec_config
- Reduce line length of qman_update_cgr_safe
- Rebase onto net-next/master
Changes in v4:
- weer -> were
- tricy -> tricky
- Use mac_dev for calling change_addr
- qman_cgr_create -> qman_create_cgr
Changes in v2:
- Fix prototype for dtsec_initialization
- Fix warning if sizeof(void *) != sizeof(resource_size_t)
- Specify type of mac_dev for exception_cb
- Add helper for sanity checking cgr ops
- Add CGR update function
- Adjust queue depth on rate change
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of setting the queue depth once during probe, adjust it on the
fly whenever we configure the link. This is a bit unusal, since usually
the DPAA driver calls into the FMAN driver, but here we do the opposite.
We need to add a netdev to struct mac_device for this, but it will soon
live in the phylink config.
I haven't tested this extensively, but it doesn't seem to break
anything. We could possibly optimize this a bit by keeping track of the
last rate, but for now we just update every time. 10GEC probably doesn't
need to call into this at all, but I've added it for consistency.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds a function to update a CGR with new parameters. qman_create_cgr
can almost be used for this (with flags=0), but it's not suitable because
it also registers the callback function. The _safe variant was modeled off
of qman_cgr_delete_safe. However, we handle multiple arguments and a return
value.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This breaks out/combines get_affine_portal and the cgr sanity check in
preparation for the next commit. No functional change intended.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are several references to mac_dev in dpaa_netdev_init. Make things a
bit more concise by adding a local variable for it.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When disabling, there is nothing we can do about errors. In fact, the
only error which can occur is misuse of the API. Just warn in the mac
driver instead.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This removes the _return label, since something like
err = -EFOO;
goto _return;
can be replaced by the briefer
return -EFOO;
Additionally, this skips going to _return_of_node_put when dev_node has
already been put (preventing a double put).
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of using a void pointer for mac_dev, specify its type
explicitly.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some params are already present in mac_dev. Use them directly instead of
passing them through params.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of having the mac init functions call back into the fman core to
get their params, just pass them directly to the init functions.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't need to remap the base address from the resource twice (once in
mac_probe() and again in set_fman_mac_params()). We still need the
resource to get the end address, but we can use a single function call
to get both at once.
While we're at it, use platform_get_mem_or_io and devm_request_resource
to map the resource. I think this is the more "correct" way to do things
here, since we use the pdev resource, instead of creating a new one.
It's still a bit tricky, since we need to ensure that the resource is a
child of the fman region when it gets requested.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This member was used to pass the phy node between mac_probe and the
mac-specific initialization function. But now that the phy node is
gotten in the initialization function, this parameter does not serve a
purpose. Remove it, and do the grabbing of the node/grabbing of the phy
in the same place.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are several small functions which were only necessary because the
initialization functions didn't have access to the mac private data. Now
that they do, just do things directly.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These methods are no longer accessed outside of the driver file, so mark
them as static.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This moves mac-specific initialization to mac-specific files. This will
make it easier to work with individual macs. It will also make it easier
to refactor the initialization to simplify the control flow. No
functional change intended.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Let's trust the hardware here and remove this useless check.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
HPD event after fbdev unregistration can cause registration of deferred
fbdev which will not be unregistered later, causing use-after-free.
To avoid it HPD handling should be suspended before fbdev unregistration.
It should fix following GPF:
[272.634530] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP NOPTI
[272.634536] CPU: 0 PID: 6030 Comm: i915_selftest Tainted: G U 5.18.0-rc5-CI_DRM_11603-g12dccf4f5eef+ #1
[272.634541] Hardware name: Intel Corporation Raptor Lake Client Platform/RPL-S ADP-S DDR5 UDIMM CRB, BIOS RPLSFWI1.R00.2397.A01.2109300731 09/30/2021
[272.634545] RIP: 0010:fb_do_apertures_overlap.part.14+0x26/0x60
...
[272.634582] Call Trace:
[272.634583] <TASK>
[272.634585] do_remove_conflicting_framebuffers+0x59/0xa0
[272.634589] remove_conflicting_framebuffers+0x2d/0xc0
[272.634592] remove_conflicting_pci_framebuffers+0xc8/0x110
[272.634595] drm_aperture_remove_conflicting_pci_framebuffers+0x52/0x70
[272.634604] i915_driver_probe+0x63a/0xdd0 [i915]
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5329
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5510
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220826141929.189681-3-andrzej.hajda@intel.com
i915->hotplug.dig_port_work can be queued from intel_hpd_irq_handler
called by IRQ handler or by intel_hpd_trigger_irq called from dp_mst.
Since dp_mst is suspended after irq handler uninstall, a cleaner approach
is to cancel hpd work after intel_dp_mst_suspend, otherwise we risk
use-after-free.
It should fix following WARNINGS:
[283.405824] cpu_latency_qos_update_request called for unknown object
[283.405866] WARNING: CPU: 2 PID: 240 at kernel/power/qos.c:296 cpu_latency_qos_update_request+0x2d/0x100
[283.405912] CPU: 2 PID: 240 Comm: kworker/u64:9 Not tainted 5.18.0-rc6-Patchwork_103738v3-g1672d1c43e43+ #1
[283.405915] Hardware name: Intel Corporation Raptor Lake Client Platform/RPL-S ADP-S DDR5 UDIMM CRB, BIOS RPLSFWI1.R00.2397.A01.2109300731 09/30/2021
[283.405916] Workqueue: i915-dp i915_digport_work_func [i915]
[283.406020] RIP: 0010:cpu_latency_qos_update_request+0x2d/0x100
...
[283.406040] Call Trace:
[283.406041] <TASK>
[283.406044] intel_dp_aux_xfer+0x60e/0x8e0 [i915]
[283.406131] ? finish_swait+0x80/0x80
[283.406139] intel_dp_aux_transfer+0xc5/0x2b0 [i915]
[283.406218] drm_dp_dpcd_access+0x79/0x130 [drm_display_helper]
[283.406227] drm_dp_dpcd_read+0xe2/0xf0 [drm_display_helper]
[283.406233] intel_dp_hpd_pulse+0x134/0x570 [i915]
[283.406308] ? __down_killable+0x70/0x140
[283.406313] i915_digport_work_func+0xba/0x150 [i915]
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/4586
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5558
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220826141929.189681-2-andrzej.hajda@intel.com
There is no point to call pcim_iounmap_regions() in the remove function,
this frees a managed resource that would be release by the framework
anyway.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. Fix this up to be much
simpler logic and only create the root debugfs directory once when the
driver is first accessed. That resolves the memory leak and makes
things more obvious as to what the intent is.
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Cc: stable <stable@kernel.org>
Fixes: 21da57a231 ("net: mvpp2: add a debugfs interface for the Header Parser")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The newly added stac_check_power_status() caused a compile warning
when CONFIG_SND_HDA_INPUT_BEEP is disabled. Fix it.
Fixes: 414d38ba87 ("ALSA: hda/sigmatel: Keep power up while beep is enabled")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220905130630.2845-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a small race window at snd_pcm_oss_sync() that is called from
OSS PCM SNDCTL_DSP_SYNC ioctl; namely the function calls
snd_pcm_oss_make_ready() at first, then takes the params_lock mutex
for the rest. When the stream is set up again by another thread
between them, it leads to inconsistency, and may result in unexpected
results such as NULL dereference of OSS buffer as a fuzzer spotted
recently.
The fix is simply to cover snd_pcm_oss_make_ready() call into the same
params_lock mutex with snd_pcm_oss_make_ready_locked() variant.
Reported-and-tested-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAFcO6XN7JDM4xSXGhtusQfS2mSBcx50VJKwQpCq=WeLt57aaZA@mail.gmail.com
Link: https://lore.kernel.org/r/20220905060714.22549-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The VBT gained some bits to inidicate the max FRL rate for
HDMI 2.1, define them.
These just outright replaced the slave_port bits for ganged eDP.
Apparently that feature was never actually used so someone decided
that reusing the bits is fine. Although the actual ganged eDP
enable bit was still left defined elsewhere for some reason.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220715202044.11153-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Return the value set_link_state() directly instead of storing it in
another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/20220901074209.313004-1-ye.xingchen@zte.com.cn
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add the missing clk_disable_unprepare() before return
from spi_qup_pm_resume_runtime() in the error handling case.
Fixes: dae1a7700b (“spi: qup: Handle clocks in pm_runtime suspend and resume”)
Signed-off-by: Xu Qiang <xuqiang36@huawei.com>
Link: https://lore.kernel.org/r/20220825065324.68446-2-xuqiang36@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the missing clk_disable_unprepare() before return
from spi_qup_resume() in the error handling case.
Fixes: 64ff247a97 (“spi: Add Qualcomm QUP SPI controller support”)
Signed-off-by: Xu Qiang <xuqiang36@huawei.com>
Link: https://lore.kernel.org/r/20220825065324.68446-1-xuqiang36@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
I would like to stop exporting OF-specific devm_gpiod_get_from_of_node()
so that gpiolib can be cleaned a bit, so let's switch to the generic
fwnode property API.
While at it switch the rest of the calls to read properties in
bd957x_probe() to the generic device property API as well.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20220903-gpiod_get_from_of_node-remove-v1-9-b29adfb27a6c@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
I would like to stop exporting OF-specific devm_gpiod_get_from_of_node()
so that gpiolib can be cleaned a bit, so let's switch to the generic
fwnode property API.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20220903-gpiod_get_from_of_node-remove-v1-8-b29adfb27a6c@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a few unneeded blank lines in some of event definitions,
remove them in order to make those definitions consistent with
the rest.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220901132336.33234-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to have explicit castings to the same type the
variables are of. Remove the explicit castings.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20220901132336.33234-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If the buffer pointer is NULL we already are in troubles since
regmap bulk API expects caller to provide valid parameters,
it dereferences that without any checks before we call for
traces.
Moreover, the current code will print garbage in the case of
buffer is NULL and length is not 0.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220901132336.33234-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>