Commit graph

1,189,500 commits

Author SHA1 Message Date
Arun Ramadoss
c476bede4b net: dsa: microchip: ksz8795: use common xmii function
This patch updates the ksz8795 cpu configuration to use the ksz common
xmii set functions.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27 09:39:17 +01:00
Arun Ramadoss
0ab7f6bf16 net: dsa: microchip: ksz9477: use common xmii function
In ksz9477.c file, configuring the xmii register is performed based on
the flag NEW_XMII. The flag is reset for ksz9893 switch and set for
other switch. This patch uses the ksz common xmii set and get function.
The bit values are configured based on the chip id.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27 09:39:17 +01:00
Arun Ramadoss
b19ac41faa net: dsa: microchip: apply rgmii tx and rx delay in phylink mac config
This patch read the rgmii tx and rx delay from device tree and stored it
in the ksz_port.  It applies the rgmii delay to the xmii tune adjust
register based on the interface selected in phylink mac config. There
are two rgmii port in LAN937x and value to be loaded in the register
vary depends on the port selected.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27 09:39:17 +01:00
Arun Ramadoss
dc1c596edb net: dsa: microchip: lan937x: add support for configuing xMII register
This patch add the common ksz_set_xmii function for ksz series switch
and update the lan937x code phylink mac config. The register address for
the ksz8795 is Port 5 Interface control 6 and for all other switch is
xMII Control 1.
The bit value for selecting the interface is same for
KSZ8795 and KSZ9893 are same. The bit values for KSZ9477 and lan973x are
same. So, this patch add the bit value for each switches in
ksz_chip_data and configure the registers based on the chip id.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27 09:39:17 +01:00
Arun Ramadoss
da8cd08520 net: dsa: microchip: add support for common phylink mac link up
This patch add the support for common phylink mac link up for the ksz
series switch. The register address, bit position and values are
configured based on the chip id to the dev->info structure.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27 09:39:17 +01:00
Arun Ramadoss
8560664fd3 net: dsa: microchip: add common duplex and flow control function
This patch add common function for configuring the Full/Half duplex and
transmit/receive flow control. KSZ8795 uses the Global control register
4 for configuring the duplex and flow control, whereas all other KSZ9477
based switch uses the xMII Control 0 register.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27 09:39:17 +01:00
Arun Ramadoss
aa5b8b73d4 net: dsa: microchip: add common ksz port xmii speed selection function
This patch adds the function for configuring the 100/10Mbps speed
selection for the ksz switches. KSZ8795 switch uses Global control 4
register 0x06 bit 4 for choosing 100/10Mpbs. Other switches uses xMII
control 1 0xN300 for it.
For KSZ8795, if the bit is set then 10Mbps is chosen and if bit is
clear then 100Mbps chosen. For all other switches it is other way
around, if the bit is set then 100Mbps is chosen.
So, this patch add the generic function for ksz switch to select the
100/10Mbps speed selection. While configuring, first it disables the
gigabit functionality and then configure the respective speed.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27 09:39:17 +01:00
Arun Ramadoss
46f80fa898 net: dsa: microchip: add common gigabit set and get function
This patch add helper function for setting and getting the gigabit
enable for the ksz series switch. KSZ8795 switch has different register
address compared to all other ksz switches. KSZ8795 series uses the Port
5 Interface control 6 Bit 6 for configuring the 1Gbps or 100/10Mbps
speed selection. All other switches uses the xMII control 1 0xN301
register Bit6 for gigabit.
Further, for KSZ8795 & KSZ9893 switches if bit 1 then 1Gbps is chosen
and if bit 0 then 100/10Mbps is chosen. It is other way around for
other switches bit 0 is for 1Gbps. So, this patch implements the common
function for configuring the gigabit set and get capability.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-27 09:39:16 +01:00
Christian Brauner
ba40a57ff0
Add Seth Forshee as co-maintainer for idmapped mounts
Seth has been integral in the design and implementation of idmapped
mounts and was the main architect behind the s_user_ns work which
ultimately made filesystems such as FUSE and overlayfs available in
containers. He continues to be active in both development and review.
I'm very happy he decided to maintain this feature. He has my full
trust.

Link: https://lore.kernel.org/r/20220726141615.1046027-1-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-07-27 10:13:44 +02:00
Daniel Vetter
5727dcfd84 fbdev: Make registered_fb[] private to fbmem.c
No driver access this anymore, except for the olpc dcon fbdev driver but
that has been marked as broken anyways by commit de0952f267 ("staging:
olpc_dcon: mark driver as broken").

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220725075400.68478-1-javierm@redhat.com
2022-07-27 09:40:18 +02:00
Marek Vasut
57b2efce45 drm/panel/panel-sitronix-st7701: Add Densitron DMT028VGHMCMI-1A TFT
Add support for Densitron DMT028VGHMCMI-1A TFT matrix into this driver.
This is a DSI-attached 480x640 2.83 inch panel.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220725151703.319939-2-marex@denx.de
2022-07-27 09:19:27 +02:00
Marek Vasut
e6e627482a dt-bindings: display: panel: sitronix,st7701: Add Densitron DMT028VGHMCMI-1A TFT
Add compatible string for Densitron DMT028VGHMCMI-1A TFT matrix.
This is a DSI-attached 480x640 2.83 inch panel.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: devicetree@vger.kernel.org
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220725151703.319939-1-marex@denx.de
2022-07-27 09:19:26 +02:00
Slark Xiao
b320c7b734 drm: Fix typo 'the the' in comment
Replace 'the the' with 'the' in the comment.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220721062345.46842-1-slark_xiao@163.com
2022-07-27 09:17:58 +02:00
Krzysztof Kozlowski
e48ef9a9c5 dt-bindings: soc: microchip: use absolute path to other schema
Absolute path to other DT schema is preferred over relative one.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220726115841.101249-4-krzysztof.kozlowski@linaro.org
2022-07-27 09:50:11 +03:00
Krzysztof Kozlowski
43f45415f3 dt-bindings: soc: microchip: drop quotes when not needed
Id and schema fields do not need quotes.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220726115841.101249-3-krzysztof.kozlowski@linaro.org
2022-07-27 09:50:11 +03:00
Claudiu Beznea
ed65704f3a ARM: dts: lan966x: keep lan966 entries alphabetically sorted
Keep LAN966 entries alphabetically sorted.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220726084931.1789855-1-claudiu.beznea@microchip.com
2022-07-27 09:49:02 +03:00
Phillip Potter
2b5002e2cc staging: r8188eu: convert rtw_pwr_wakeup to correct error code semantics
Convert the rtw_pwr_wakeup function to use 0 on success and an appropriate
error code on error. For the first failure block where ips_leave is
invoked, use -ENOMEM as this is the main cause of failure here anyway.
For the second failure block, use -EBUSY, as it seems the most
appropriate.

Finally, within the functions rtw_wx_set_mode, rtw_wx_set_wap,
rtw_wx_set_scan and rtw_wx_set_essid, pass the error code on from
rtw_pwr_wakeup as appropriate now that it is converted.

This gets the driver closer to removal of the non-standard _SUCCESS and
_FAIL definitions, which are inverted compared to the standard in-kernel
error code mechanism.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220725220745.12739-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-27 08:45:32 +02:00
Michael Straube
4709238102 staging: r8188eu: make dump_chip_info() static
The function dump_chip_info() is only used in rtl8188e_hal_init.c.
Make it static to reduce the driver object file size by 281 bytes.

before:
  text    data     bss     dec     hex filename
530606   43897    7072  581575   8dfc7 drivers/staging/r8188eu/r8188eu.o

after:
  text    data     bss     dec     hex filename
530405   43817    7072  581294   8deae drivers/staging/r8188eu/r8188eu.o

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220724182520.7794-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-27 08:45:22 +02:00
Martin Kaiser
123b3b754e staging: r8188eu: remove DoReserved prototype
The DoReserved function was removed in commit 869ddbfccd ("staging:
r8188eu: remove dummy entries from OnAction_tbl"). Remove the prototype
as well.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220724153349.138741-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-27 08:45:11 +02:00
Martin Kaiser
51ee8ea588 staging: r8188eu: remove OnAtim prototype
The OnAtim function was removed in commit 6d933902c6 ("staging: r8188eu:
remove OnAtim"). Remove the prototype as well.

Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com> # Edimax N150
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220724153349.138741-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-27 08:45:11 +02:00
Michael Straube
b9ad667059 staging: r8188eu: remove SetHwReg8188EU()
Remove the case HW_VAR_CORRECT_TSF from SetHwReg8188EU() and move the
functionality to the function that calls SetHwReg8188EU() with
HW_VAR_CORRECT_TSF. SetHwReg8188EU() is empty now and we can finally
remove it.

Tested-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220715062908.8547-6-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-27 08:42:25 +02:00
Michael Straube
7136ef70a0 staging: r8188eu: make update_TSF() and correct_TSF() static
The functions update_TSF() and correct_TSF() are only used in
rtw_mlme_ext.c. Make them static.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220715062908.8547-5-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-27 08:42:25 +02:00
Michael Straube
21b044c903 staging: r8188eu: remove unused parameter from update_TSF()
The parameter 'len' of update_TSF() is unused. Remove it.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220715062908.8547-4-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-27 08:42:24 +02:00
Michael Straube
0f83ff0129 staging: r8188eu: remove unused parameter from correct_TSF()
The parameter 'pmlmeext' of correct_TSF() is unused. Remove it.

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220715062908.8547-3-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-27 08:42:24 +02:00
Michael Straube
3cc664a99e staging: r8188eu: remove HW_VAR_SET_OPMODE from SetHwReg8188EU()
Remove the HW_VAR_SET_OPMODE case from SetHwReg8188EU() and move the
functions that are called by that case to rtw_mlme_ext.c. This is part
of the ongoing effort to get rid of SetHwReg8188EU().

Signed-off-by: Michael Straube <straube.linux@gmail.com>
Link: https://lore.kernel.org/r/20220715062908.8547-2-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-27 08:42:24 +02:00
Sidong Yang
6a74f103e3 staging: pi433: remove duplicated comments
Remove duplicated words in comments for readability. The words are
duplicated from a sentence below.

Signed-off-by: Sidong Yang <realwakka@gmail.com>
Link: https://lore.kernel.org/r/20220725114513.85089-1-realwakka@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-27 08:42:14 +02:00
Binyi Han
97c9a70f12 staging: qlge: refine variable name
tmp as a variable name don't have much information, change tmp to dma.

Signed-off-by: Binyi Han <dantengknight@gmail.com>
Link: https://lore.kernel.org/r/20220715061754.GA6657@cloud-MacBookPro
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-27 08:41:23 +02:00
Ankit Nautiyal
3565c7219c drm/i915/hdmi: Prune modes that require HDMI2.1 FRL
HDMI2.1 requires some higher resolution video modes to be enumerated
only if HDMI2.1 Fixed Rate Link (FRL) is supported.
Current platforms do not support FRL transmission so prune modes that
require HDMI2.1 FRL.

v2: Fixed the condition to check for dotclock > 600.
Return MODE_CLOCK_HIGH as mode status.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> (v1)
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220721084645.3411219-1-ankit.k.nautiyal@intel.com
2022-07-27 10:47:42 +05:30
Namjae Jeon
17ea92a9f6 ksmbd: fix kernel oops from idr_remove()
There is a report that kernel oops happen from idr_remove().

kernel: BUG: kernel NULL pointer dereference, address: 0000000000000010
kernel: RIP: 0010:idr_remove+0x1/0x20
kernel:  __ksmbd_close_fd+0xb2/0x2d0 [ksmbd]
kernel:  ksmbd_vfs_read+0x91/0x190 [ksmbd]
kernel:  ksmbd_fd_put+0x29/0x40 [ksmbd]
kernel:  smb2_read+0x210/0x390 [ksmbd]
kernel:  __process_request+0xa4/0x180 [ksmbd]
kernel:  __handle_ksmbd_work+0xf0/0x290 [ksmbd]
kernel:  handle_ksmbd_work+0x2d/0x50 [ksmbd]
kernel:  process_one_work+0x21d/0x3f0
kernel:  worker_thread+0x50/0x3d0
kernel:  rescuer_thread+0x390/0x390
kernel:  kthread+0xee/0x120
kthread_complete_and_exit+0x20/0x20
kernel:  ret_from_fork+0x22/0x30

While accessing files, If connection is disconnected, windows send
session setup request included previous session destroy. But while still
processing requests on previous session, this request destroy file
table, which mean file table idr will be freed and set to NULL.
So kernel oops happen from ft->idr in __ksmbd_close_fd().
This patch don't directly destroy session in destroy_previous_session().
It just set to KSMBD_SESS_EXITING so that connection will be
terminated after finishing the rest of requests.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2022-07-26 23:38:05 -05:00
Namjae Jeon
8e06b31e34 ksmbd: add channel rwlock
Add missing rwlock for channel list in session.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2022-07-26 23:38:05 -05:00
Namjae Jeon
e4d3e6b524 ksmbd: replace sessions list in connection with xarray
Replace sessions list in connection with xarray.

Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2022-07-26 23:38:05 -05:00
Slark Xiao
060468f0dd selftests: net: Fix typo 'the the' in comment
Replace 'the the' with 'the' in the comment.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://lore.kernel.org/r/20220725020124.5760-1-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26 20:26:58 -07:00
Robert Schmidt
38ac173b0e hwmon: (nct6775) add ASUS TUF GAMING B550-PLUS WIFI II
Add ASUS TUF GAMING B550-PLUS WIFI II to the WMI monitoring list
to enable support for HW monitoring on that board.

Signed-off-by: Robert Schmidt <r-schmidt@web.de>
Link: https://lore.kernel.org/r/YuBZodZHOnDll5zy@hydra
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2022-07-26 20:16:54 -07:00
Eric Dumazet
a7e555d4a1 ip6mr: remove stray rcu_read_unlock() from ip6_mr_forward()
One rcu_read_unlock() should have been removed in blamed commit.

Fixes: 9b1c21d898 ("ip6mr: do not acquire mrt_lock while calling ip6_mr_forward()")
Reported-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20220725200554.2563581-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26 19:59:18 -07:00
Mat Martineau
b5177ed92b mptcp: Do not return EINPROGRESS when subflow creation succeeds
New subflows are created within the kernel using O_NONBLOCK, so
EINPROGRESS is the expected return value from kernel_connect().
__mptcp_subflow_connect() has the correct logic to consider EINPROGRESS
to be a successful case, but it has also used that error code as its
return value.

Before v5.19 this was benign: all the callers ignored the return
value. Starting in v5.19 there is a MPTCP_PM_CMD_SUBFLOW_CREATE generic
netlink command that does use the return value, so the EINPROGRESS gets
propagated to userspace.

Make __mptcp_subflow_connect() always return 0 on success instead.

Fixes: ec3edaa7ca ("mptcp: Add handling of outgoing MP_JOIN requests")
Fixes: 702c2f646d ("mptcp: netlink: allow userspace-driven subflow establishment")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20220725205231.87529-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26 19:57:55 -07:00
Jakub Kicinski
e77ea97d2b Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:

====================
netfilter updates for net

Three late fixes for netfilter:

1) If nf_queue user requests packet truncation below size of l3 header,
   we corrupt the skb, then crash.  Reject such requests.

2) add cond_resched() calls when doing cycle detection in the
   nf_tables graph.  This avoids softlockup warning with certain
   rulesets.

3) Reject rulesets that use nftables 'queue' expression in family/chain
   combinations other than those that are supported.  Currently the ruleset
   will load, but when userspace attempts to reinject you get WARN splat +
   packet drops.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nft_queue: only allow supported familes and hooks
  netfilter: nf_tables: add rescheduling points during loop detection walks
  netfilter: nf_queue: do not allow packet truncation below transport header offset
====================

Link: https://lore.kernel.org/r/20220726192056.13497-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26 19:53:09 -07:00
Jakub Kicinski
e53f529397 bluetooth pull request for net:
- Fix early wakeup after suspend
  - Fix double free on error
  - Fix use-after-free on l2cap_chan_put
 -----BEGIN PGP SIGNATURE-----
 
 iQJNBAABCAA3FiEE7E6oRXp8w05ovYr/9JCA4xAyCykFAmLgXYkZHGx1aXoudm9u
 LmRlbnR6QGludGVsLmNvbQAKCRD0kIDjEDILKd4AD/9RgobBI3tUfpKe0BXhju2p
 pjx/oL1SSqfF5kOvHNn/37dZ6tXQlqTl4yM0pD36Gos+UX1n1zyaBxm8teEhHx7h
 /yLiWW8cGmae1+OwrfL63uqjRnwJUNjp4EPHZNWczsCrSIr+RqYkWomyFzcXWcsi
 bjh2USvURKQZqeSDLMvEWI1H3Xjcu9q3atE5sXvJpUmthqraI5ewBYTLUMmvIM3J
 sm/wcA7cIl1HEOE21h6L+irMN33wtfjKADoYYV6BlWdAzj6xMmr/yxCbBS3jNNTW
 XaZLwJTp11YxeDu+ZSvEEIe5Q05DDY4qBMxWZxIFaBhxNWO+sDexHGjYonGvlL6M
 OjuLMdyqfDOCFuWYeuBAcQA9TfA/ibA7WC9OeEf7aZONI3ZPeX+71VXlAlz9Z8ly
 /DfV8keY7FIhoKrxJRgJa94hS/o4/zrIeP3Gylw4itbooLX0bKbrg9YBvgmldMT6
 054vdN8bXdfBi4ooWkzzCyZ86I/PRS3mtenJj+fK9iYaKZGRB4t3bOYo/7Gabb62
 VqrivooaVSL9A3bBRB3WO+5igf2o5gz03nAQjm8G1X/2gBtXz8wU3nZOrAsGa2W8
 3+dmx4BJ8EgUE4IDmbZIvFZwJaT7njjHmnDYpTlbl17Evquqjv8NooF5x0wTaebV
 cGhaI9RTPdLVtbDR0jXj4Q==
 =4Cuo
 -----END PGP SIGNATURE-----

Merge tag 'for-net-2022-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - Fix early wakeup after suspend
 - Fix double free on error
 - Fix use-after-free on l2cap_chan_put

* tag 'for-net-2022-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put
  Bluetooth: Always set event mask on suspend
  Bluetooth: mgmt: Fix double free on error path
====================

Link: https://lore.kernel.org/r/20220726221328.423714-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26 19:48:24 -07:00
Mike Christie
8fcdc238ce scsi: target: Remove XDWRITEREAD emulated support
This patch removes XDWRITEREAD support because it never fully worked when
it was added in the initial LIO merge and it's been fully broken since 2013
from commit a289008749 ("target: Add compare_and_write_post() completion
callback fall through").

The two issues above are:

1. XDWRITEREAD support was just never completed when LIO was merged. We
never did the DISABLE WRITE check and so we never write data out.

2. Since the commit above, we never complete the command. After we do the
XOR, we return from xdreadwrite_callback and that's it. We never send a
response for the command, so the command will always time out and fail.

Since this has been fully broken for almost nine years this patch just
removes emulated support.

Link: https://lore.kernel.org/r/20220726235339.14551-1-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-26 22:40:31 -04:00
Linus Torvalds
39c3c396f8 Thirteen hotfixes, Eight are cc:stable and the remainder are for post-5.18
issues or are too minor to warrant backporting
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYuCV7gAKCRDdBJ7gKXxA
 jrK2AQDeoayQKXJFTcEltKAUTooXM/BoRf+O3ti/xrSWpwta8wEAjaBIJ8e7UlCj
 g+p6u/pd38f226ldzI5w3bIBSPCbnwU=
 =3rO0
 -----END PGP SIGNATURE-----

Merge tag 'mm-hotfixes-stable-2022-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "Thirteen hotfixes.

  Eight are cc:stable and the remainder are for post-5.18 issues or are
  too minor to warrant backporting"

* tag 'mm-hotfixes-stable-2022-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mailmap: update Gao Xiang's email addresses
  userfaultfd: provide properly masked address for huge-pages
  Revert "ocfs2: mount shared volume without ha stack"
  hugetlb: fix memoryleak in hugetlb_mcopy_atomic_pte
  fs: sendfile handles O_NONBLOCK of out_fd
  ntfs: fix use-after-free in ntfs_ucsncmp()
  secretmem: fix unhandled fault in truncate
  mm/hugetlb: separate path for hwpoison entry in copy_hugetlb_page_range()
  mm: fix missing wake-up event for FSDAX pages
  mm: fix page leak with multiple threads mapping the same page
  mailmap: update Seth Forshee's email address
  tmpfs: fix the issue that the mount and remount results are inconsistent.
  mm: kfence: apply kmemleak_ignore_phys on early allocated pool
2022-07-26 19:38:46 -07:00
Jason Wang
68126eeb6d scsi: megaraid: Remove the static variable initialisation
Initialising global and static variables to 0 is unnecessary.  Remove the
initialisation.

Link: https://lore.kernel.org/r/20220723091620.5463-1-wangborong@cdjrlc.com
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-26 22:15:47 -04:00
Xin Gao
241b79b1e9 scsi: ch: Do not initialise statics to 0
Link: https://lore.kernel.org/r/20220720195229.9109-1-gaoxin@cdjrlc.com
Signed-off-by: Xin Gao <gaoxin@cdjrlc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-26 22:13:29 -04:00
Colin Ian King
aaa26e383b scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot"
There is a spelling mistake in a dev_dbg message. Fix it.

Link: https://lore.kernel.org/r/20220719110649.759821-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-26 22:13:29 -04:00
Dmitry Bogdanov
292cef5e62 scsi: target: iscsi: Do not require target authentication
RFC7143 states that Initiator decides what type of authentication to
use:

The initiator MUST continue with:
    CHAP_N=<N> CHAP_R=<R>
or, if it requires target authentication, with:
    CHAP_N=<N> CHAP_R=<R> CHAP_I=<I> CHAP_C=<C>

Allow one way authentication if mutual authentication is configured.  That
passes some tests from Windows HLK for Mutual CHAP with iSNS.

Link: https://lore.kernel.org/r/20220718152555.17084-5-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-26 22:13:29 -04:00
Dmitry Bogdanov
e52b904b49 scsi: target: iscsi: Allow AuthMethod=None
Allow negotiating AuthMethod=None at CSG=0 (Security Negotiation) when
authentication is not required. That is required by the CHAP test in
Windows HLK.

Link: https://lore.kernel.org/r/20220718152555.17084-4-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-26 22:13:28 -04:00
Dmitry Bogdanov
1e57338834 scsi: target: iscsi: Support base64 in CHAP
RFC7143 allows both Base64 and Hex encoding for CHAP binary entities like
Challenge and Response. Currently the Linux iSCSI target supports only Hex
encoding.

Add support for Base64 encoded CHAP Challenge and CHAP Response required
for CHAP tests in Windows HLK.

Link: https://lore.kernel.org/r/20220718152555.17084-3-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-26 22:13:28 -04:00
Dmitry Bogdanov
8f1f7d297b scsi: target: iscsi: Add support for extended CDB AHS
Variable length SCSI commands are transferred over iSCSI via two CDB
buffers - in Basic Header Segment and in Additional Header Segment (AHS).
Since AHS is not supported yet, a target reads just BHS (48 byte) from TCP
and treats the remaining octets as a next new iSCSI PDU that causes
protocol errors.

Add support for the Extended CDB AHS type.

Link: https://lore.kernel.org/r/20220718152555.17084-2-d.bogdanov@yadro.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-26 22:13:28 -04:00
Johan Hovold
2f3b3200ac scsi: ufs: dt-bindings: Add SC8280XP binding
Add SC8280XP to the DT schema.

Link: https://lore.kernel.org/r/20220711101441.4896-1-johan+linaro@kernel.org
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-26 22:13:28 -04:00
Bart Van Assche
f5c2976e0c scsi: ufs: core: Fix a race condition related to device management
If a device management command completion happens after
wait_for_completion_timeout() times out and before ufshcd_clear_cmds() is
called, then the completion code may crash on the complete() call in
__ufshcd_transfer_req_compl().

Fix the following crash:

  Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
  Call trace:
   complete+0x64/0x178
   __ufshcd_transfer_req_compl+0x30c/0x9c0
   ufshcd_poll+0xf0/0x208
   ufshcd_sl_intr+0xb8/0xf0
   ufshcd_intr+0x168/0x2f4
   __handle_irq_event_percpu+0xa0/0x30c
   handle_irq_event+0x84/0x178
   handle_fasteoi_irq+0x150/0x2e8
   __handle_domain_irq+0x114/0x1e4
   gic_handle_irq.31846+0x58/0x300
   el1_irq+0xe4/0x1c0
   efi_header_end+0x110/0x680
   __irq_exit_rcu+0x108/0x124
   __handle_domain_irq+0x118/0x1e4
   gic_handle_irq.31846+0x58/0x300
   el1_irq+0xe4/0x1c0
   cpuidle_enter_state+0x3ac/0x8c4
   do_idle+0x2fc/0x55c
   cpu_startup_entry+0x84/0x90
   kernel_init+0x0/0x310
   start_kernel+0x0/0x608
   start_kernel+0x4ec/0x608

Link: https://lore.kernel.org/r/20220720170228.1598842-1-bvanassche@acm.org
Fixes: 5a0b0cb9be ("[SCSI] ufs: Add support for sending NOP OUT UPIU")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-26 21:59:29 -04:00
Jason Yan
d9a434fa0c scsi: core: Fix warning in scsi_alloc_sgtables()
As explained in SG_IO howto[1]:

"If iovec_count is non-zero then 'dxfer_len' should be equal to the sum of
iov_len lengths. If not, the minimum of the two is the transfer length."

When iovec_count is non-zero and dxfer_len is zero, the sg_io() just
genarated a null bio, and finally caused a warning below. To fix it, skip
generating a bio for this request if dxfer_len is zero.

[1] https://tldp.org/HOWTO/SCSI-Generic-HOWTO/x198.html

WARNING: CPU: 2 PID: 3643 at drivers/scsi/scsi_lib.c:1032 scsi_alloc_sgtables+0xc7d/0xf70 drivers/scsi/scsi_lib.c:1032
Modules linked in:

CPU: 2 PID: 3643 Comm: syz-executor397 Not tainted
5.17.0-rc3-syzkaller-00316-gb81b1829e7e3 #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-204/01/2014
RIP: 0010:scsi_alloc_sgtables+0xc7d/0xf70 drivers/scsi/scsi_lib.c:1032
Code: e7 fc 31 ff 44 89 f6 e8 c1 4e e7 fc 45 85 f6 0f 84 1a f5 ff ff e8
93 4c e7 fc 83 c5 01 0f b7 ed e9 0f f5 ff ff e8 83 4c e7 fc <0f> 0b 41
   bc 0a 00 00 00 e9 2b fb ff ff 41 bc 09 00 00 00 e9 20 fb
RSP: 0018:ffffc90000d07558 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff88801bfc96a0 RCX: 0000000000000000
RDX: ffff88801c876000 RSI: ffffffff849060bd RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff849055b9 R11: 0000000000000000 R12: ffff888012b8c000
R13: ffff88801bfc9580 R14: 0000000000000000 R15: ffff88801432c000
FS:  00007effdec8e700(0000) GS:ffff88802cc00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007effdec6d718 CR3: 00000000206d6000 CR4: 0000000000150ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 scsi_setup_scsi_cmnd drivers/scsi/scsi_lib.c:1219 [inline]
 scsi_prepare_cmd drivers/scsi/scsi_lib.c:1614 [inline]
 scsi_queue_rq+0x283e/0x3630 drivers/scsi/scsi_lib.c:1730
 blk_mq_dispatch_rq_list+0x6ea/0x22e0 block/blk-mq.c:1851
 __blk_mq_sched_dispatch_requests+0x20b/0x410 block/blk-mq-sched.c:299
 blk_mq_sched_dispatch_requests+0xfb/0x180 block/blk-mq-sched.c:332
 __blk_mq_run_hw_queue+0xf9/0x350 block/blk-mq.c:1968
 __blk_mq_delay_run_hw_queue+0x5b6/0x6c0 block/blk-mq.c:2045
 blk_mq_run_hw_queue+0x30f/0x480 block/blk-mq.c:2096
 blk_mq_sched_insert_request+0x340/0x440 block/blk-mq-sched.c:451
 blk_execute_rq+0xcc/0x340 block/blk-mq.c:1231
 sg_io+0x67c/0x1210 drivers/scsi/scsi_ioctl.c:485
 scsi_ioctl_sg_io drivers/scsi/scsi_ioctl.c:866 [inline]
 scsi_ioctl+0xa66/0x1560 drivers/scsi/scsi_ioctl.c:921
 sd_ioctl+0x199/0x2a0 drivers/scsi/sd.c:1576
 blkdev_ioctl+0x37a/0x800 block/ioctl.c:588
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:874 [inline]
 __se_sys_ioctl fs/ioctl.c:860 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7effdecdc5d9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 81 14 00 00 90 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007effdec8e2f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007effded664c0 RCX: 00007effdecdc5d9
RDX: 0000000020002300 RSI: 0000000000002285 RDI: 0000000000000004
RBP: 00007effded34034 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
R13: 00007effded34054 R14: 2f30656c69662f2e R15: 00007effded664c8

Link: https://lore.kernel.org/r/20220720025120.3226770-1-yanaijie@huawei.com
Fixes: 25636e282f ("block: fix SG_IO vector request data length handling")
Reported-by: syzbot+d44b35ecfb807e5af0b5@syzkaller.appspotmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-26 21:54:30 -04:00
Liang He
a3435afba8 scsi: ufs: host: Hold reference returned by of_parse_phandle()
In ufshcd_populate_vreg(), we should hold the reference returned by
of_parse_phandle() and then use it to call of_node_put() for refcount
balance.

Link: https://lore.kernel.org/r/20220719071529.1081166-1-windhl@126.com
Fixes: aa49761309 ("ufs: Add regulator enable support")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-07-26 21:51:40 -04:00