Commit graph

1,189,500 commits

Author SHA1 Message Date
John Garry
608128d391 scsi: sd: allow max_sectors be capped at DMA optimal size limit
Streaming DMA mappings may be considerably slower when mappings go through
an IOMMU and the total mapping length is somewhat long. This is because the
IOMMU IOVA code allocates and free an IOVA for each mapping, which may
affect performance.

New member Scsi_Host.opt_sectors is added, which is the optimal host
max_sectors, and use this value to cap the request queue max_sectors when
set.

It could be considered to have request queues io_opt value initially
set at Scsi_Host.opt_sectors in __scsi_init_queue(), but that is not
really the purpose of io_opt.

Finally, even though Scsi_Host.opt_sectors value should never be greater
than the request queue max_hw_sectors value, continue to limit to this
value for safety.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-07-19 11:11:49 +02:00
Zheyu Ma
06674fc7c0 iio: light: isl29028: Fix the warning in isl29028_remove()
The driver use the non-managed form of the register function in
isl29028_remove(). To keep the release order as mirroring the ordering
in probe, the driver should use non-managed form in probe, too.

The following log reveals it:

[   32.374955] isl29028 0-0010: remove
[   32.376861] general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN PTI
[   32.377676] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
[   32.379432] RIP: 0010:kernfs_find_and_get_ns+0x28/0xe0
[   32.385461] Call Trace:
[   32.385807]  sysfs_unmerge_group+0x59/0x110
[   32.386110]  dpm_sysfs_remove+0x58/0xc0
[   32.386391]  device_del+0x296/0xe50
[   32.386959]  cdev_device_del+0x1d/0xd0
[   32.387231]  devm_iio_device_unreg+0x27/0xb0
[   32.387542]  devres_release_group+0x319/0x3d0
[   32.388162]  i2c_device_remove+0x93/0x1f0

Fixes: 2db5054ac2 ("staging: iio: isl29028: add runtime power management support")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220717004241.2281028-1-zheyuma97@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-19 09:42:11 +01:00
Marek Vasut
42542c7904 drm/panel/panel-sitronix-st7701: Split GIP and init sequences
The ST7701 initialization sequence is well parametrized, split the GIP
programming sequence, which is fully custom completely undocumented
TFT matrix specific magic register programming sequence into separate
callback so other TFT matrix definitions can add their own GIP sequence.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-9-marex@denx.de
2022-07-19 10:39:02 +02:00
Marek Vasut
83b7a8e7e8 drm/panel/panel-sitronix-st7701: Parametrize voltage and timing
Instead of hard-coding TFT matrix voltage and timing settings, which can
even lead to permanent TFT matrix damage, parametrize them in TFT matrix
descriptor.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-8-marex@denx.de
2022-07-19 10:39:01 +02:00
Marek Vasut
de2b491784 drm/panel/panel-sitronix-st7701: Infer horizontal pixel count from TFT mode
The horizontal pixel count is a property of the TFT matrix. Currently the
driver hard-codes content of this register to specific value which is
only compatible with one TFT matrix, likely the TS8550B one.

Calculate the horizontal pixel count from the mode instead.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-7-marex@denx.de
2022-07-19 10:39:00 +02:00
Marek Vasut
82f9cee255 drm/panel/panel-sitronix-st7701: Adjust porch control bitfield name
Define DSI_CMD2_BK0_PORCTRL_VBP_MASK and DSI_CMD2_BK0_PORCTRL_VFP_MASK
and move the vertical back and front porch calculation from macros into
the st7701_init_sequence() function, so it is clear what this does.

No functional change.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-6-marex@denx.de
2022-07-19 10:38:59 +02:00
Marek Vasut
1ba85119af drm/panel/panel-sitronix-st7701: Infer vertical line count from TFT mode
The vertical line count is a property of the TFT matrix. Currently the
driver hard-codes content of this register to specific value which is
only compatible with one TFT matrix, likely the TS8550B one.

Calculate the vertical line count from the mode instead.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-5-marex@denx.de
2022-07-19 10:38:57 +02:00
Marek Vasut
779c84fea3 drm/panel/panel-sitronix-st7701: Make gamma correction TFT specific
The gamma correction values are specific to the TFT which is attached to
the ST7701 TFT matrix driver, move the gamma correction values from what
incorrectly looks like common init sequence into TFT matrix specific
settings.

While doing so, add macros which defined fields within the gamma register
file and a macro which mimics FIELD_PREP except works with constant
expressions.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-4-marex@denx.de
2022-07-19 10:38:56 +02:00
Marek Vasut
7fa8e07128 drm/panel/panel-sitronix-st7701: Make voltage supplies common to ST7701
The ST7701 and ST7701S all have two voltage supplies, one for internal
logic and one for the TFT matrix driver. The supplies are not property
of the TFT matrix driver, so move them to common ST7701 code.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-3-marex@denx.de
2022-07-19 10:38:55 +02:00
Marek Vasut
a6c225be3d drm/panel/panel-sitronix-st7701: Enable DSI burst mode, LPM, non-continuous clock
The ST7701(S) is capable of DSI burst mode, which is more energy
efficient than the non-burst modes. Make use of it.

The ST7701(S) is capable of DSI non-continuous clock, since it
sources the TFT matrix driver clock from internal clock source.
The DSI non-continuous clock further reduce power utilization.

The ST7701(S) uses DSI LPM for command transmissions, make sure
this is configured correctly in the DSI mode flags.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-2-marex@denx.de
2022-07-19 10:38:54 +02:00
LI Qingwu
3cfb0e1d39 iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
After added inclination angle channels, the trigger buffer size is
insufficient. Extend the buffer size from 16 to 32 bytes, and change
the trigger buffer from the struct to a u8 array to adapt the sensor
with/without inclination angles output.
New trigger buffer data:
  - SCA3300: 3 accel channels, temp, and timestamp.
  - SCL3300: 3 accel channels, temp, 3 incli channels, and timestamp.
Readjustment the scan index to make it consistent with the buffer data.

Signed-off-by: LI Qingwu <Qing-wu.Li@leica-geosystems.com.cn>
Link: https://lore.kernel.org/r/20220701023030.2527019-2-Qing-wu.Li@leica-geosystems.com.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-19 09:38:53 +01:00
Marek Vasut
6f481afe22 drm/panel/panel-sitronix-st7701: Make DSI mode flags common to ST7701
The ST7701 and ST7701S are TFT matrix drivers with integrated multi
protocol decoder capable of DSI/DPI/SPI input and 480x360...864 line
TFT matrix output. Currently the only supported input is DSI.

The protocol decoder is separate from the TFT matrix driver and is
always capable of handling all of DSI non-burst mode with sync pulses
or sync events as well as DSI burst mode.

Move the DSI mode configuration from TFT matrix driver properties to
common ST7701 code, because this is common to all TFT matrices.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220710194437.289042-1-marex@denx.de
2022-07-19 10:38:52 +02:00
Fawzi Khaber
5e1f918503 iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
iio_format_avail_range() should print range as follow [min, step, max], so
the function was previously calling iio_format_list() with length = 3,
length variable refers to the array size of values not the number of
elements. In case of non IIO_VAL_INT values each element has integer part
and decimal part. With length = 3 this would cause premature end of loop
and result in printing only one element.

Signed-off-by: Fawzi Khaber <fawzi.khaber@tdk.com>
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Fixes: eda20ba1e2 ("iio: core: Consolidate iio_format_avail_{list,range}()")
Link: https://lore.kernel.org/r/20220718130706.32571-1-jmaneyrol@invensense.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-19 09:31:27 +01:00
Xiao Yang
68691bad98 RDMA/rxe: Remove unused qp parameter
The qp parameter in free_rd_atomic_resource() has become
unused so remove it directly.

Fixes: 15ae1375ea ("RDMA/rxe: Fix qp reference counting for atomic ops")
Link: https://lore.kernel.org/all/20220708035547.6592-1-yangx.jy@fujitsu.com/
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-19 11:31:09 +03:00
Dan Carpenter
06ee60eb50 iio: adc: max1027: unlock on error path in max1027_read_single_value()
If max1027_wait_eoc() fails then call iio_device_release_direct_mode()
before returning.

Fixes: a0e831653e ("iio: adc: max1027: Introduce an end of conversion helper")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YsbztVuAXnau2cIZ@kili
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-07-19 09:30:05 +01:00
Nuno Sá
d042656a21 dt-bindings: gpio: add pull-disable flag
This extends the flags that can be used in GPIO specifiers to indicate
that no bias is intended in the pin.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 10:24:17 +02:00
Nuno Sá
6fd03f0248 gpiolib: acpi: support bias pull disable
On top of looking at PULL_UP and PULL_DOWN flags, also look at
PULL_DISABLE and set the appropriate GPIO flag. The GPIO core will then
pass down this to controllers that support it.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 10:24:10 +02:00
Nuno Sá
31bea23119 gpiolib: of: support bias pull disable
On top of looking at PULL_UP and PULL_DOWN flags, also look at
PULL_DISABLE and set the appropriate GPIO flag. The GPIO core will then
pass down this to controllers that support it.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 10:24:01 +02:00
Nuno Sá
c269df8c5a gpiolib: add support for bias pull disable
This change prepares the gpio core to look at firmware flags and set
'FLAG_BIAS_DISABLE' if necessary. It works in similar way to
'GPIO_PULL_DOWN' and 'GPIO_PULL_UP'.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 10:23:54 +02:00
Andy Shevchenko
28ba057456 gpio: 74xx-mmio: use bits.h macros for all masks
Make use of the GENMASK() (far less error-prone, far more concise).

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 10:14:49 +02:00
Andy Shevchenko
d3054ba1db gpio: 74xx-mmio: Check MMIO_74XX_DIR_IN flag in mmio_74xx_dir_in()
It's logically better to check the IN in ->direction_input() and
_OUT in ->direction_output().

While at it, replace ternary with plain if-conditional for the sake
of consistency with mmio_74xx_dir_out().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 10:14:37 +02:00
Andy Shevchenko
10fcd2f180 gpio: 74xx-mmio: Make use of device properties
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.

Add mod_devicetable.h include.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 10:14:29 +02:00
Jason Wang
b3be1e57f2 IB/qib: Fix comment typo
The double `are' is duplicated in line 156, remove one.

Link: https://lore.kernel.org/r/20220715054007.5320-1-wangborong@cdjrlc.com
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
2022-07-19 11:11:54 +03:00
Kent Gibson
272ddba004 gpiolib: cdev: compile out HTE unless CONFIG_HTE selected
The majority of builds do not include HTE, so compile out hte
functionality unless CONFIG_HTE is selected.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 10:02:46 +02:00
Kent Gibson
b1a92e9456 gpiolib: cdev: consolidate edge detector configuration flags
Combine the polarity_change flag, struct line eflags, and hte enable
flag into a single flag variable.

The combination of these flags describes the configuration state
of the edge detector, so formalize and clarify that by combining
them into a single variable, edflags, in struct line.

The edflags is a subset of the GPIO_V2_LINE_FLAGsb relevant to
the edge detector, and is also a superset of the eflags it replaces.
The eflags name is still used to describe the subset of edflags
corresponding to the rising/falling edge flags where edflags is
masked down to that subset.

This consolidation reduces the number of variables being passed,
simplifies state comparisons, and provides a more extensible
foundation should additional edge sources be integrated in the
future.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 10:02:12 +02:00
Kent Gibson
242202329f gpiolib: cdev: simplify line event identification
Reorganise line event identification code to reduce code duplication,
and replace if-else initializers with a helper function to improve
readability.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2022-07-19 10:01:25 +02:00
Kent Gibson
cfa53463ac gpiolib: cdev: replace if-else chains with switches
Improve readability by replacing if-else chains with switch
statements.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 10:01:25 +02:00
Kent Gibson
2487a81223 gpiolib: cdev: simplify parameter in call to hte_edge_setup
Improve readability by using the GPIO_V2_LINE_FLAG_EDGE_BOTH instead
of combining the rising and falling edge flags.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Dipen Patel <dipenp@nvidia.com>
Tested-by: Dipen Patel <dipenp@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 10:01:25 +02:00
Kent Gibson
160d6e4029 gpiolib: cdev: simplify linereq_free
The edge detector is only ever started after the line desc has been
determined, so move edge_detector_stop() inside the line desc check,
and merge the two checked regions into one.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Dipen Patel <dipenp@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 10:01:22 +02:00
Aakash Sen Sharma
3e2d53b273 gpio: 104-idi-48: unsigned to unsigned int cleanup
Remove checkpatch warnings. No functional changes.

Signed-off-by: Aakash Sen Sharma <aakashsensharma@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 09:57:41 +02:00
Geert Uytterhoeven
b06d7b458a gpio: GPIO_SAMA5D2_PIOBU should depend on ARCH_AT91
The SAMA5D2 PIOBU is only present on some AT91/Microchip SoCs.  Hence
add a dependency on ARCH_AT91, to prevent asking the user about this
driver when configuring a kernel without AT91/Microchip SoC support.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 09:57:41 +02:00
Liang He
5d07a692f9 gpio: gpiolib-of: Fix refcount bugs in of_mm_gpiochip_add_data()
We should use of_node_get() when a new reference of device_node
is created. It is noted that the old reference stored in
'mm_gc->gc.of_node' should also be decreased.

This patch is based on the fact that there is a call site in function
'qe_add_gpiochips()' of src file 'drivers\soc\fsl\qe\gpio.c'. In this
function, of_mm_gpiochip_add_data() is contained in an iteration of
for_each_compatible_node() which will automatically increase and
decrease the refcount. So we need additional of_node_get() for the
reference escape in of_mm_gpiochip_add_data().

Fixes: a19e3da5bc ("of/gpio: Kill of_gpio_chip and add members directly to gpio_chip")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 09:57:41 +02:00
Aparna M
6b7e8c796d dt-bindings: gpio: Convert TI TPIC2810 GPIO Controller bindings to YAML
Convert gpio-tpic2810 bindings to yaml format and remove outdated
bindings in .txt format.

Signed-off-by: Aparna M <a-m1@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 09:57:40 +02:00
Shinyzenith
13e024b66c gpio: lp3943: unsigned to unsigned int cleanup
Getting rid of checkpatch findings. No functional changes.

Signed-off-by: Shinyzenith <aakashsensharma@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 09:57:40 +02:00
Bartosz Golaszewski
90ce2f01e7 intel-gpio for v5.20-1
* Clean up the GPIO driver of Intel EG20 PCH
 
 The following is an automated git shortlog grouped by driver:
 
 pch:
  -  Change PCI device macros
  -  Use dev_err_probe()
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQSu93Raj3rZDNXzGZv7cr9lmVa5zAUCYsiZVAAKCRD7cr9lmVa5
 zGNfAQDIAbAkO4eJKxX/dnWzA1v3I48hzWWU8Gs6wLQFCQ80GAEAtoGSpKMkhgCE
 SFYpnRicJHxOewjvCiL/61p8Vc38sgs=
 =skec
 -----END PGP SIGNATURE-----

Merge tag 'intel-gpio-v5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into TEST_MERGE

intel-gpio for v5.20-1

* Clean up the GPIO driver of Intel EG20 PCH

The following is an automated git shortlog grouped by driver:

pch:
 -  Change PCI device macros
 -  Use dev_err_probe()
2022-07-19 09:57:25 +02:00
Andy Shevchenko
597a8a888d gpiolib: of: Use device_match_of_node() helper
Instead of open coding, use device_match_of_node() helper.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 09:57:13 +02:00
Andy Shevchenko
6169d76c56 gpio: adp5588: sort header inclusion alphabetically
Sort header inclusion alphabetically.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 09:57:13 +02:00
Andy Shevchenko
669f5618fe gpio: adp5588: Do not use defined value for driver name and compatible
It's wrong to use defined string literal for three semantically different
cases, i.e.:
1) compatible string, which is part of ABI and has to have specific format;
2) I2C ID, which is user space visible and also ABI;
3) driver name, that can be changed.

Drop the define and use appropriate string literals in place.

While at it, drop comma at terminator entry of OF ID table.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 09:57:13 +02:00
Andy Shevchenko
4a40ccccb6 gpio: adp5588: Switch from of headers to mod_devicetable.h
There is nothing directly using of specific interfaces in this driver,
so lets not include the headers.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 09:57:13 +02:00
Jianqun Xu
cc165ba48a gpio: rockchip: add support for rk3588
Add V2.1 rockchip gpio controller type, which is part of the
RK3588 SoC.

Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
2022-07-19 09:57:13 +02:00
Sebastian Reichel
036e9cf356 dt-bindings: gpio: rockchip: add gpio-ranges
Allow usage of gpio-ranges with the rockchip gpio controller. The driver
already had support for this since it has been added to the mainline kernel
in the first place.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 09:57:13 +02:00
Andy Shevchenko
8773bacefc gpio: adnp: Make use of device properties
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 09:57:13 +02:00
Andy Shevchenko
a2a15e1263 gpio: adnp: use simple i2c probe function
The i2c probe functions here don't use the id information provided in
their second argument, so the single-parameter i2c probe function
("probe_new") can be used instead.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 09:57:13 +02:00
Lucas Stach
d274f02eb9 gpio: pca9570: add pca9571 support
The PCA9571 very similar to the PCA9570, it only differs in the
number of GPIOs.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 09:57:13 +02:00
Lucas Stach
91e9111bdd gpio: pca9570: Add DT bindings for NXP PCA9571
This patch adds device tree bindings for the NXP PCA9571,
a 8-bit I2C GPIO expander.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 09:57:13 +02:00
Uwe Kleine-König
3d57fa2a22 gpio: xgs-iproc: Drop if with an always false condition
The remove callback is only called after probe completed successfully.
In this case platform_set_drvdata() was called with a non-NULL argument
and so chip is never NULL.

Also note that returning an error code from a remove callback doesn't
result in the device staying bound. It's still removed and devm
callbacks are called.

This is a preparation for making platform remove callbacks return void.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 09:57:13 +02:00
Uwe Kleine-König
1923433cd6 gpio: brcmstb: Make .remove() obviously always return 0
priv cannot be NULL because brcmstb_gpio_probe() calls
platform_set_drvdata() with a non-NULL argument, so the check for !priv can
be dropped.

Also remove the variable ret that is only used to hide a bit that in the
end zero is returned.

This is a preparation for making platform remove callbacks return void.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 09:56:51 +02:00
Uwe Kleine-König
7e55b33d3f gpio: ucb1400: Remove platform setup and teardown support
There is no user of these callbacks. The motivation for this change is
to stop returning an error code from the remove callback.

This is a preparation for making platform remove callbacks return void.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 09:56:51 +02:00
Uwe Kleine-König
421e3c16c3 gpio: twl4030: Don't return an error after WARN in .remove
Returning a non-zero value in a platform driver's remove callback only
results in an error message ("remove callback returned a non-zero value.
This will be ignored.", see platform_remove()), and then the device is
removed anyhow.

As there was just a WARN_ON triggered, return 0 to drop the follow up
warning. The latter output is hardly relevant after the big WARN splat.

This is a preparation for making platform remove callbacks return void.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 09:56:51 +02:00
Uwe Kleine-König
2a1192ff08 gpio: twl4030: Drop platform teardown callback
There is no machine providing a teardown callback, so drop the unused
code.

This is a preparation for making platform remove callbacks return void.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2022-07-19 09:56:51 +02:00