Instead of having high_threshold > 0 as an indicator for upper threshold
event and lower threshold event otherwise, use enum iio_event_direction
instead. This is hopefully less ambiguous.
Signed-off-by: Patrik Dahlström <risca@dalakolonin.se>
Link: https://lore.kernel.org/r/20230408114825.824505-6-risca@dalakolonin.se
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The palmas gpadc block has support for monitoring up to 2 ADC channels
and issue an interrupt if they reach past a set threshold. This is
currently used to wake up the system from sleep, but the functionality
is more generic than that. As such, change the naming of functions and
variables to refer to it as events instead, except during suspend and
resume where wakeup still make sense.
Signed-off-by: Patrik Dahlström <risca@dalakolonin.se>
Link: https://lore.kernel.org/r/20230408114825.824505-5-risca@dalakolonin.se
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
It does not seem to be used by anyone and later patches in this series
are made simpler by first removing this. There is now a lot of dead code
that cannot be reached, until later patches revive it. Arguably, this is
preferred over removing the code only to add it again.
Signed-off-by: Patrik Dahlström <risca@dalakolonin.se>
Link: https://lore.kernel.org/r/20230408114825.824505-4-risca@dalakolonin.se
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
DSDT ROTM method seen in the wild with SMO8B30 _HID.
Making assumption it is similar to that used for bmc150 plus
information from Darrell that the rotation is out by 90 degrees at boot.
Method (ROTM, 0, NotSerialized)
{
Name (RBUF, Package (0x03)
{
"0 -1 0",
"1 0 0",
"0 0 1"
})
Return (RBUF) /* \_SB_.PCI0.I2C5.DEV_.ROTM.RBUF */
}
Reported-by: Darrell Kavanagh <darrell.kavanagh@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Darrell Kavanagh <darrell.kavanagh@gmail.org>
Link: https://lore.kernel.org/r/20230130201018.981024-3-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This reverts commit 566fc96198.
This exposes a userspace API that is still under debate. Revert the
change before the uAPI gets exposed to avoid making a mistake. QAIC is
otherwise still functional.
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1681307864-3782-1-git-send-email-quic_jhugo@quicinc.com
The dmar_insert_dev_scope() could fail if any unexpected condition is
encountered. However, in this situation, the kernel should attempt
recovery and proceed with execution. Remove BUG_ON with WARN_ON, so that
kernel can avoid being crashed when an unexpected condition occurs.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20230406065944.2773296-8-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When dmar_alloc_pci_notify_info() is being invoked, the invoker has
ensured the dev->is_virtfn is false. So, remove the useless BUG_ON in
dmar_alloc_pci_notify_info().
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20230406065944.2773296-7-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Domain map/unmap with invalid parameters shouldn't crash the kernel.
Therefore, using if() replaces the BUG_ON.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20230406065944.2773296-6-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When performing domain_context_mapping or getting dma_pte of a pfn, the
availability of the domain page table directory is ensured. Therefore,
the domain->pgd checkings are unnecessary.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20230406065944.2773296-5-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
VT-d iotlb cache invalidation request with unexpected type is considered
as a bug to developers, which can be fixed. So, when such kind of issue
comes out, it needs to be reported through the kernel log, instead of
halting the system. Replacing BUG_ON with warning reporting.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20230406065944.2773296-4-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When encountering an unexpected invalid pfn range, the kernel should
attempt recovery and proceed with execution. Therefore, using WARN_ON to
replace BUG_ON to avoid halting the machine.
Besides, one redundant checking is reduced.
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20230406065944.2773296-3-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This addresses the following issue reported by klocwork tool:
- operands of different size in bitwise operations
Suggested-by: Yongwei Ma <yongwei.ma@intel.com>
Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Link: https://lore.kernel.org/r/20230406065944.2773296-2-tina.zhang@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There's no more usage, remove PASID supervisor support.
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20230331231137.1947675-3-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Supervisor Request Enable (SRE) bit in a PASID entry is for permission
checking on DMA requests. When SRE = 0, DMA with supervisor privilege
will be blocked. However, for in-kernel DMA this is not necessary in that
we are targeting kernel memory anyway. There's no need to differentiate
user and kernel for in-kernel DMA.
Let's use non-privileged (user) permission for all PASIDs used in kernel,
it will be consistent with DMA without PASID (RID_PASID) as well.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20230331231137.1947675-2-jacob.jun.pan@linux.intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The kernel coding style does not require 'extern' in function prototypes
in .h files, so remove them from drivers/iommu/intel/iommu.h as they are
not needed.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230331045452.500265-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
There is no need to use GFP_ATOMIC here. GFP_KERNEL is already used for
some other memory allocations just a few lines above.
Commit e3a981d61d ("iommu/vt-d: Convert allocations to GFP_KERNEL") has
changed the other memory allocation flags.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/e2a8a1019ffc8a86b4b4ed93def3623f60581274.1675542576.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
iommu_unregister_device_fault_handler() and iopf_queue_remove_device()
are called after device has stopped issuing new page falut requests and
all outstanding page requests have been drained. They should never fail.
Trigger a warning if it happens unfortunately.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230324120234.313643-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
PRI is only used for IOPF. With this move, the PCI/PRI feature could be
controlled by the device driver through iommu_dev_enable/disable_feature()
interfaces.
Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230324120234.313643-6-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
They should be part of the per-device iommu private data initialization.
Reviewed-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230324120234.313643-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Generally enabling IOMMU_DEV_FEAT_SVA requires IOMMU_DEV_FEAT_IOPF, but
some devices manage I/O Page Faults themselves instead of relying on the
IOMMU. Move IOPF related code from SVA to IOPF enabling path.
For the device drivers that relies on the IOMMU for IOPF through PCI/PRI,
IOMMU_DEV_FEAT_IOPF must be enabled before and disabled after
IOMMU_DEV_FEAT_SVA.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230324120234.313643-4-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Currently enabling SVA requires IOPF support from the IOMMU and device
PCI PRI. However, some devices can handle IOPF by itself without ever
sending PCI page requests nor advertising PRI capability.
Allow SVA support with IOPF handled either by IOMMU (PCI PRI) or device
driver (device-specific IOPF). As long as IOPF could be handled, SVA
should continue to work.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230324120234.313643-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The iommu subsystem requires IOMMU_DEV_FEAT_IOPF must be enabled before
and disabled after IOMMU_DEV_FEAT_SVA, if device's I/O page faults rely
on the IOMMU. Add explicit IOMMU_DEV_FEAT_IOPF enabling/disabling in this
driver.
At present, missing IOPF enabling/disabling doesn't cause any real issue,
because the IOMMU driver places the IOPF enabling/disabling in the path
of SVA feature handling. But this may change.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20230324120234.313643-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Prepare for the MM nodes whose dma-ranges(iova range) is 16GB.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230411093144.2690-15-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After commit f1ad5338a4 ("of: Fix "dma-ranges" handling for bus
controllers"), the dma-ranges property is not allowed for
the leaf node. But our iommu/dma-ranges is 16GB, we still expect
separate the 16GB dma-range like:
a) display is in 0 - 4GB;
b) vcodec is in 4GB - 8GB;
c) camera is in 8GB - 12GB.
We can not expect all the masters add a parent node for them,
especial for the existed drivers/nodes.
Thus, we add whole the 16GB dma-ranges in the parent "soc" node.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230411093144.2690-14-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After we add the dma-ranges in the parent "soc" node,
this property is unnecessary for the leaf node.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230411093144.2690-13-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In order to simplify the masters to set their respective dma masks, MTK
IOMMU helps to centralize the processing. Because all the dma ranges is
set in IOMMU, IOMMU knows well the dma mask requirements of masters. After
this patch, the masters(codec here) code does not need care
dma-ranges/dma_mask related information.
Cc: Tiffany Lin <tiffany.lin@mediatek.com>
Cc: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
Cc: Yunfei Dong <yunfei.dong@mediatek.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: irui wang <irui.wang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230411093144.2690-12-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In order to simplify the masters to set their respective dma masks, MTK
IOMMU helps to centralize the processing. Because all the dma ranges is
set in IOMMU, IOMMU knows well the dma mask requirements of masters. After
this patch, the masters code does not need care
dma-ranges/dma_mask related information.
Cc: Bin Liu <bin.liu@mediatek.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: kyrie wu <kyrie.wu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230411093144.2690-11-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
MediaTek iommu arranges dma ranges for all the masters, this patch is to
help them set dma mask. This is to avoid each master setting their own
mask, but also to avoid a real issue, such as JPEG uses
"mediatek,mtk-jpgenc" for 2701/8183/8186/8188, then JPEG could ignore its
different dma_mask in different SoC to achieve common code.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230411093144.2690-10-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
As the removed property in the vcodec dt-binding, the property is:
dma-ranges = <0x1 0x0 0x0 0x40000000 0x0 0xfff00000>;
The length is 0xfff0_0000 rather than 0x1_0000_0000, this means it
requires 1M as a gap. This is because the end address for some vcodec
HW is (address + size). If the size is 4G, the end address may be
0x2_0000_0000, and the width for vcodec register only is 32, then the
HW may get the ZERO address.
Currently the consumer's dma-ranges property doesn't work, IOMMU
has to consider this case. Add a bigger gap(8M) for all the regions
to avoid it.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230411093144.2690-9-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add iova_region_larb_msk for mt8186. We separate the 16GB iova regions
by each device's larbid/portid.
Note: larb5/6/10/12/14/15/18 connect nothing in this SoC.
Refer to include/dt-bindings/memory/mt8186-memory-port.h
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230411093144.2690-8-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add iova_region_larb_msk for mt8195. We separate the 16GB iova regions
by each device's larbid/portid.
Refer to include/dt-bindings/memory/mt8195-memory-port.h
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230411093144.2690-7-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add iova_region_larb_msk for mt8192. We separate the 16GB iova regions
by each device's larbid/portid.
Note: larb3/6/8/10/12/15 connect nothing in this SoC.
Refer to the comment in include/dt-bindings/memory/mt8192-larb-port.h
Define a new macro MT8192_MULTI_REGION_NR_MAX to indicate
the index of mt8xxx_larb_region_msk and
"struct mtk_iommu_iova_region mt8192_multi_dom"
are the same.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230411093144.2690-6-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After commit f1ad5338a4 ("of: Fix "dma-ranges" handling for bus
controllers"), the dma-ranges is not allowed for dts leaf node.
but we still would like to separate to different masters
into different iova regions.
Thus we have to separate it by the HW larbid and portid. For example,
larb1/2 are in region2 and larb3 is in region3. The problem is that
some ports inside a larb are in region4 while some ports inside this
larb are in region5. Therefore I define a "iova_region_larb_msk" to help
record the information for each a port. Take a example for a larb:
[1] = ~0: means all ports in this larb are in region1;
[2] = BIT(3) | BIT(4): means port3/4 in this larb are region2;
[3] = ~(BIT(3) | BIT(4)): means all the other ports except port3/4
in this larb are region3.
This method also avoids the users forget/abuse the iova regions.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230411093144.2690-5-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
No functional change. Just add more comment about the current region/bank
in the code.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230411093144.2690-4-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After commit f1ad5338a4 ("of: Fix "dma-ranges" handling for bus
controllers"), the dma-ranges of the leaf node doesn't work. Remove
it for jpeg here.
Currently there is only mt8195 jpeg node has this property in upstream,
and it already uses parent-child node, this property did work. But instead,
MediaTek iommu will control the masters' iova ranges by the master's
larb/port id internally, then this property is unnecessary.
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Bin Liu <bin.liu@mediatek.com>
Cc: kyrie wu <kyrie.wu@mediatek.corp-partner.google.com>
Cc: Xia Jiang <xia.jiang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/20230411093144.2690-3-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
After commit f1ad5338a4 ("of: Fix "dma-ranges" handling for bus
controllers"), the dma-ranges of the leaf node doesn't work. Remove
it for vcodec here.
For mediatek,vcodec-decoder.yaml and mediatek,vcodec-encoder.yaml,
this property is in the leaf node, it is invalid as the above comment.
Currently there is only mt8195 VENC node has this property in upstream.
Indeed, VENC is affected, but it is not a fatal issue. Originally it
expects its iova range locate at 4GB-8GB. However after that commit, its
expectation doesn't come true, it will fall back to 0-4GB iova and also
could work well.
Cc: Tiffany Lin <tiffany.lin@mediatek.com>
Cc: Andrew-CT Chen <andrew-ct.chen@mediatek.com>
Cc: Yunfei Dong <yunfei.dong@mediatek.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/20230411093144.2690-2-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
commit b9c6ff94e4 ("iommu/amd: Re-factor guest virtual APIC
(de-)activation code") while refactoring guest virtual APIC
activation/de-activation code, stored information for activate/de-activate
in "struct amd_ir_data". It used 32-bit integer data type for storing the
"Guest Virtual APIC Table Root Pointer" (ga_root_ptr), though the
"ga_root_ptr" is actually a 40-bit field in IRTE (Interrupt Remapping
Table Entry).
This causes interrupts from PCIe devices to not reach the guest in the case
of PCIe passthrough with SME (Secure Memory Encryption) enabled as _SME_
bit in the "ga_root_ptr" is lost before writing it to the IRTE.
Fix it by using 64-bit data type for storing the "ga_root_ptr". While at
that also change the data type of "ga_tag" to u32 in order to match
the IOMMU spec.
Fixes: b9c6ff94e4 ("iommu/amd: Re-factor guest virtual APIC (de-)activation code")
Cc: stable@vger.kernel.org # v5.4+
Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Link: https://lore.kernel.org/r/20230405130317.9351-1-kvijayab@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With the addition of the V2 page table support, the domain page size
bitmap needs to be set prior to iommu core setting up direct mappings
for reserved regions. When reserved regions are mapped, if this is not
done, it will be looking at the V1 page size bitmap when determining
the page size to use in iommu_pgsize(). When it gets into the actual
amd mapping code, a check of see if the page size is supported can
fail, because at that point it is checking it against the V2 page size
bitmap which only supports 4K, 2M, and 1G.
Add a check to __iommu_domain_alloc() to not override the
bitmap if it was already set by the iommu ops domain_alloc() code path.
Cc: Vasant Hegde <vasant.hegde@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Joerg Roedel <joro@8bytes.org>
Fixes: 4db6c41f09 ("iommu/amd: Add support for using AMD IOMMU v2 page table for DMA-API")
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20230404072742.1895252-1-jsnitsel@redhat.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Similar to exynos, we need a set_platform_dma_ops() callback for proper
operation on ARM 32 bit after recent changes in the IOMMU framework
(detach ops removal). But also the use of a NULL domain is confusing.
Rework the code to add support for IOMMU_DOMAIN_IDENTITY and a singleton
rk_identity_domain which is assigned to domain when using an identity
mapping rather than "detaching". This makes the code easier to reason about.
Signed-off-by: Steven Price <steven.price@arm.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20230331095154.2671129-1-steven.price@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fix the name of the aoclk81 clock. Apparently name aoclk81 as used by
the vendor driver was changed when mainlining the g12a clock driver.
Fixes: f41efceb46 ("pwm: meson: Add clock source configuration for Meson G12A")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This fix is basically the same as 9bce02ef0d ("pwm: meson: Fix the
G12A AO clock parents order"). Vendor driver referenced there has
xtal as first parent also for axg ao. In addition fix the name
of the aoclk81 clock. Apparently name aoclk81 as used by the vendor
driver was changed when mainlining the axg clock driver.
Fixes: bccaa3f917 ("pwm: meson: Add clock source configuration for Meson-AXG")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Remove an inability of bnxt_en driver to set eswitch to switchdev
mode without existing VFs by:
1. Allow to set switchdev mode in bnxt_dl_eswitch_mode_set() so
representors are created only when num_vfs > 0 otherwise just
set bp->eswitch_mode
2. Do not automatically change bp->eswitch_mode during
bnxt_vf_reps_create() and bnxt_vf_reps_destroy() calls so
the eswitch mode is managed only by an user by devlink.
Just set temporarily bp->eswitch_mode to legacy to avoid
re-opening of representors during destroy.
3. Create representors in bnxt_sriov_enable() if current eswitch
mode is switchdev one
Tested by this sequence:
1. Set PF interface up
2. Set PF's eswitch mode to switchdev
3. Created N VFs
4. Checked that N representors were created
5. Set eswitch mode to legacy
6. Checked that representors were deleted
7. Set eswitch mode back to switchdev
8. Checked that representors exist again for VFs
9. Deleted all VFs
10. Checked that all representors were deleted as well
11. Checked that current eswitch mode is still switchdev
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Link: https://lore.kernel.org/r/20230411120443.126055-1-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
vexpress-config uses of_platform_* functions which are declared in
of_platform.h. of_platform.h gets implicitly included by of_device.h,
but that is going to be removed soon. Nothing else depends on
of_device.h so it can be dropped.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/r/20230410232727.1562115-1-robh@kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Recent work enables cacheinfo memory for secondary CPUs to be allocated
early, while still running on the primary CPU. That allows cacheinfo
memory to be allocated safely on RT kernels. To make that work, the
number of cache levels/leaves must be defined in the device tree or ACPI
tables. Further work adds a path for early detection of the number of
cache levels/leaves, which makes it possible to allocate the cacheinfo
memory early without requiring extra DT/ACPI information.
This patch addresses a specific issue with ACPI systems with no PPTT. In
that case, parse_acpi_topology() returns an error code, which in turn
makes init_cpu_topology() return early, before fetch_cache_info() is
called. In that case, the early cache level detection doesn't run.
The solution is to simply remove the "return" statement and let the code
flow fall through to calling fetch_cache_info().
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Reported-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/all/dea94484-797f-3034-7b86-6d88801c0d91@arm.com/
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20230412185759.755408-4-rrendec@redhat.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This patch adds an architecture specific early cache level detection
handler for arm64. This is basically the CLIDR_EL1 based detection that
was previously done (only) in init_cache_level().
This is part of a patch series that attempts to further the work in
commit 5944ce092b ("arch_topology: Build cacheinfo from primary CPU").
Previously, in the absence of any DT/ACPI cache info, architecture
specific cache detection and info allocation for secondary CPUs would
happen in non-preemptible context during early CPU initialization and
trigger a "BUG: sleeping function called from invalid context" splat on
an RT kernel.
This patch does not solve the problem completely for RT kernels. It
relies on the assumption that on most systems, the CPUs are symmetrical
and therefore have the same number of cache leaves. The cacheinfo memory
is allocated early (on the primary CPU), relying on the new handler. If
later (when CLIDR_EL1 based detection runs again on the secondary CPU)
the initial assumption proves to be wrong and the CPU has in fact more
leaves, the cacheinfo memory is reallocated, and that still triggers a
splat on an RT kernel.
In other words, asymmetrical CPU systems *must* still provide cacheinfo
data in DT/ACPI to avoid the splat on RT kernels (unless secondary CPUs
happen to have less leaves than the primary CPU). But symmetrical CPU
systems (the majority) can now get away without the additional DT/ACPI
data and rely on CLIDR_EL1 based detection.
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20230412185759.755408-3-rrendec@redhat.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
This patch gives architecture specific code the ability to initialize
the cache level and allocate cacheinfo memory early, when cache level
initialization runs on the primary CPU for all possible CPUs.
This is part of a patch series that attempts to further the work in
commit 5944ce092b ("arch_topology: Build cacheinfo from primary CPU").
Previously, in the absence of any DT/ACPI cache info, architecture
specific cache detection and info allocation for secondary CPUs would
happen in non-preemptible context during early CPU initialization and
trigger a "BUG: sleeping function called from invalid context" splat on
an RT kernel.
More specifically, this patch adds the early_cache_level() function,
which is called by fetch_cache_info() as a fallback when the number of
cache leaves cannot be extracted from DT/ACPI. In the default generic
(weak) implementation, this new function returns -ENOENT, which
preserves the original behavior for architectures that do not implement
the function.
Since early detection can get the number of cache leaves wrong in some
cases*, additional logic is added to still call init_cache_level() later
on the secondary CPU, therefore giving the architecture specific code an
opportunity to go back and fix the initial guess. Again, the original
behavior is preserved for architectures that do not implement the new
function.
* For example, on arm64, CLIDR_EL1 detection works only when it runs on
the current CPU. In other words, a CPU cannot detect the cache depth
for any other CPU than itself.
Signed-off-by: Radu Rendec <rrendec@redhat.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Link: https://lore.kernel.org/r/20230412185759.755408-2-rrendec@redhat.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
