Multiple ct actions was not supported when only chain was
restored on misses, as CT is a modifying action which could
modify the packet and cause the sw ct rule to not match again
and continue processing.
Now that the misses continue from the relevant tc ct action
in software, this case is supported.
Remove this limitation.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
CT action has special treating as a per-flow action since
it was assumed to be singular and reordered to be first on
the action list.
This isn't the case anymore, and can be converted to just a
FWD to pre_ct + MODIFY_HEAD, and handled per post_act rule.
Remove special handling of CT action, and offload it while
post parsing each ct attribute.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
CT action reordering was done as a workaround when CT misses
used to restore the relevant filter's tc chain and continuing sw processing
from that chain. As such, there was a need to reorder CT action to be before
any packet modifying actions (e.g mac rewrite).
Currently (after patch "net/mlx5e: TC, Set CT miss to the specific ct
action instance"), CT misses continues from the relevant ct action in
software, and so reordering isn't needed anymore.
Remove the reordering.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
CT action can miss in a middle of an action list, use
per action stats to correctly report stats for missed
packets.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Actions that can be setup per flow attribute (so per split rule)
are cleaned up from mlx5_free_flow_attr(), mlx5e_tc_del_fdb_flow(),
and free_flow_post_acts().
Remove the duplication by re-using the helper function for
the main flow attribute and split rules attributes.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
vf_tun is being assigned but never being used so remove it.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Many parsers of tc actions just return true on their can_offload()
implementation, without checking the input flow/action.
Set the default can_offload action to true (allow), and avoid
having many can_offload implementations that do just that.
This patch doesn't change any functionality.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add LCDIF scanout engine and DSIM bridge nodes for i.MX8M Plus.
This makes the DSI display pipeline available on this SoC.
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add LCDIF scanout engine and DSIM bridge nodes for i.MX8M Nano.
This makes the DSI display pipeline available on this SoC.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add LCDIF scanout engine and DSIM bridge nodes for i.MX8M Mini.
This makes the DSI display pipeline available on this SoC.
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since commit 75c2f26da0 ("PCI: imx6: Add i.MX PCIe EP mode support")
the i.MX6 PCI driver is no longer selected by default. The
existing PCI_IMX6 was made a hidden option, selected by new options
PCI_IMX6_HOST (for the existing support) and PCI_IMX6_EP (for the
endpoint mode), but there has been no corresponding update to
imx_v6_v7_defconfig so the PCI_IMX6 ends up getting disabled.
Switch imx_v6_v7_defconfig to PCI_IMX6_HOST to preserve the existing
functionality.
This is based on the same fix done in commit 0cd5780eb6 ("arm64:
defconfig: Fix unintentional disablement of PCI on i.MX").
Fixes: 75c2f26da0 ("PCI: imx6: Add i.MX PCIe EP mode support")
Reported-by: Mattias Barthel <mattiasbarthel@gmail.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We need to enable some drivers in order to use the following peripherals
of Tarragon:
* QCA7000/7005 Powerline chip
* One-Wire Master DS2484 with external thermal sensors
* external 4 pin PWM fan
* ST IIS328DQ I2C accelerometer
Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds the support for chargebyte Tarragon, which is an Electrical
Vehicle Supply Equipment (EVSE) for AC charging stations
(according to IEC 61851, ISO 15118).
The Tarragon board is based on an i.MX6ULL SoC and is available in
4 variants (Master, Slave, SlaveXT, Micro), which provide more or
less peripherals.
Supported features:
* 512 MB DDR RAM
* eMMC
* Debug UART
* 100 Mbit Ethernet
* USB 2.0 Host interface
* Powerline communication (QCA700x)
* 2x RS485
* Digital in- and outputs (12 V)
* One-Wire master for external temp sensors
* 2x relay outputs
* 2x motor interfaces
Link: https://chargebyte.com/products/charging-station-communication/charge-control-c
Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There are cadence usb3.0 controller in 8qxp and 8qm.
Add usb3 node at common connect subsystem.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
'#clock-cells' is a dependency of 'clock-output-names', following
binding doc, add it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8MP includes the same GPT blocks as the i.MX6DL. Add all 6
instances.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is an NXP downstream property. And no binding doc, and no
driver use this property. So drop it
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
For the sake of readability, use the netlink payload helpers from
the 'nla_get_*()' family to parse the attributes.
tdc results:
1..5
ok 1 9903 - Add mqprio Qdisc to multi-queue device (8 queues)
ok 2 453a - Delete nonexistent mqprio Qdisc
ok 3 5292 - Delete mqprio Qdisc twice
ok 4 45a9 - Add mqprio Qdisc to single-queue device
ok 5 2ba9 - Show mqprio class
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230404203449.1627033-1-pctammela@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a concurrency bug that may cause the wrong value to be loaded
when a CPU is modifying the maple tree.
CPU1:
mtree_insert_range()
mas_insert()
mas_store_root()
...
mas_root_expand()
...
rcu_assign_pointer(mas->tree->ma_root, mte_mk_root(mas->node));
ma_set_meta(node, maple_leaf_64, 0, slot); <---IP
CPU2:
mtree_load()
mtree_lookup_walk()
ma_data_end();
When CPU1 is about to execute the instruction pointed to by IP, the
ma_data_end() executed by CPU2 may return the wrong end position, which
will cause the value loaded by mtree_load() to be wrong.
An example of triggering the bug:
Add mdelay(100) between rcu_assign_pointer() and ma_set_meta() in
mas_root_expand().
static DEFINE_MTREE(tree);
int work(void *p) {
unsigned long val;
for (int i = 0 ; i< 30; ++i) {
val = (unsigned long)mtree_load(&tree, 8);
mdelay(5);
pr_info("%lu",val);
}
return 0;
}
mt_init_flags(&tree, MT_FLAGS_USE_RCU);
mtree_insert(&tree, 0, (void*)12345, GFP_KERNEL);
run_thread(work)
mtree_insert(&tree, 1, (void*)56789, GFP_KERNEL);
In RCU mode, mtree_load() should always return the value before or after
the data structure is modified, and in this example mtree_load(&tree, 8)
may return 56789 which is not expected, it should always return NULL. Fix
it by put ma_set_meta() before rcu_assign_pointer().
Link: https://lkml.kernel.org/r/20230314124203.91572-4-zhangpeng.00@bytedance.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
if (likely(offset > end))
max = pivots[offset];
The above code should be changed to if (likely(offset < end)), which is
correct. This affects the correctness of ma_data_end(). Now it seems
that the final result will not be wrong, but it is best to change it.
This patch does not change the code as above, because it simplifies the
code by the way.
Link: https://lkml.kernel.org/r/20230314124203.91572-1-zhangpeng.00@bytedance.com
Link: https://lkml.kernel.org/r/20230314124203.91572-2-zhangpeng.00@bytedance.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The si->lock must be held when deleting the si from the available list.
Otherwise, another thread can re-add the si to the available list, which
can lead to memory corruption. The only place we have found where this
happens is in the swapoff path. This case can be described as below:
core 0 core 1
swapoff
del_from_avail_list(si) waiting
try lock si->lock acquire swap_avail_lock
and re-add si into
swap_avail_head
acquire si->lock but missing si already being added again, and continuing
to clear SWP_WRITEOK, etc.
It can be easily found that a massive warning messages can be triggered
inside get_swap_pages() by some special cases, for example, we call
madvise(MADV_PAGEOUT) on blocks of touched memory concurrently, meanwhile,
run much swapon-swapoff operations (e.g. stress-ng-swap).
However, in the worst case, panic can be caused by the above scene. In
swapoff(), the memory used by si could be kept in swap_info[] after
turning off a swap. This means memory corruption will not be caused
immediately until allocated and reset for a new swap in the swapon path.
A panic message caused: (with CONFIG_PLIST_DEBUG enabled)
------------[ cut here ]------------
top: 00000000e58a3003, n: 0000000013e75cda, p: 000000008cd4451a
prev: 0000000035b1e58a, n: 000000008cd4451a, p: 000000002150ee8d
next: 000000008cd4451a, n: 000000008cd4451a, p: 000000008cd4451a
WARNING: CPU: 21 PID: 1843 at lib/plist.c:60 plist_check_prev_next_node+0x50/0x70
Modules linked in: rfkill(E) crct10dif_ce(E)...
CPU: 21 PID: 1843 Comm: stress-ng Kdump: ... 5.10.134+
Hardware name: Alibaba Cloud ECS, BIOS 0.0.0 02/06/2015
pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--)
pc : plist_check_prev_next_node+0x50/0x70
lr : plist_check_prev_next_node+0x50/0x70
sp : ffff0018009d3c30
x29: ffff0018009d3c40 x28: ffff800011b32a98
x27: 0000000000000000 x26: ffff001803908000
x25: ffff8000128ea088 x24: ffff800011b32a48
x23: 0000000000000028 x22: ffff001800875c00
x21: ffff800010f9e520 x20: ffff001800875c00
x19: ffff001800fdc6e0 x18: 0000000000000030
x17: 0000000000000000 x16: 0000000000000000
x15: 0736076307640766 x14: 0730073007380731
x13: 0736076307640766 x12: 0730073007380731
x11: 000000000004058d x10: 0000000085a85b76
x9 : ffff8000101436e4 x8 : ffff800011c8ce08
x7 : 0000000000000000 x6 : 0000000000000001
x5 : ffff0017df9ed338 x4 : 0000000000000001
x3 : ffff8017ce62a000 x2 : ffff0017df9ed340
x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
plist_check_prev_next_node+0x50/0x70
plist_check_head+0x80/0xf0
plist_add+0x28/0x140
add_to_avail_list+0x9c/0xf0
_enable_swap_info+0x78/0xb4
__do_sys_swapon+0x918/0xa10
__arm64_sys_swapon+0x20/0x30
el0_svc_common+0x8c/0x220
do_el0_svc+0x2c/0x90
el0_svc+0x1c/0x30
el0_sync_handler+0xa8/0xb0
el0_sync+0x148/0x180
irq event stamp: 2082270
Now, si->lock locked before calling 'del_from_avail_list()' to make sure
other thread see the si had been deleted and SWP_WRITEOK cleared together,
will not reinsert again.
This problem exists in versions after stable 5.10.y.
Link: https://lkml.kernel.org/r/20230404154716.23058-1-rongwei.wang@linux.alibaba.com
Fixes: a2468cc9bf ("swap: choose swap device according to numa node")
Tested-by: Yongchen Yin <wb-yyc939293@alibaba-inc.com>
Signed-off-by: Rongwei Wang <rongwei.wang@linux.alibaba.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The current nilfs2 sysfs support has issues with the timing of creation
and deletion of sysfs entries, potentially leading to null pointer
dereferences, use-after-free, and lockdep warnings.
Some of the sysfs attributes for nilfs2 per-filesystem instance refer to
metadata file "cpfile", "sufile", or "dat", but
nilfs_sysfs_create_device_group that creates those attributes is executed
before the inodes for these metadata files are loaded, and
nilfs_sysfs_delete_device_group which deletes these sysfs entries is
called after releasing their metadata file inodes.
Therefore, access to some of these sysfs attributes may occur outside of
the lifetime of these metadata files, resulting in inode NULL pointer
dereferences or use-after-free.
In addition, the call to nilfs_sysfs_create_device_group() is made during
the locking period of the semaphore "ns_sem" of nilfs object, so the
shrinker call caused by the memory allocation for the sysfs entries, may
derive lock dependencies "ns_sem" -> (shrinker) -> "locks acquired in
nilfs_evict_inode()".
Since nilfs2 may acquire "ns_sem" deep in the call stack holding other
locks via its error handler __nilfs_error(), this causes lockdep to report
circular locking. This is a false positive and no circular locking
actually occurs as no inodes exist yet when
nilfs_sysfs_create_device_group() is called. Fortunately, the lockdep
warnings can be resolved by simply moving the call to
nilfs_sysfs_create_device_group() out of "ns_sem".
This fixes these sysfs issues by revising where the device's sysfs
interface is created/deleted and keeping its lifetime within the lifetime
of the metadata files above.
Link: https://lkml.kernel.org/r/20230330205515.6167-1-konishi.ryusuke@gmail.com
Fixes: dd70edbde2 ("nilfs2: integrate sysfs support into driver")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+979fa7f9c0d086fdc282@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/0000000000003414b505f7885f7e@google.com
Reported-by: syzbot+5b7d542076d9bddc3c6a@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/0000000000006ac86605f5f44eb9@google.com
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Device exclusive page table entries are used to prevent CPU access to a
page whilst it is being accessed from a device. Typically this is used to
implement atomic operations when the underlying bus does not support
atomic access. When a CPU thread encounters a device exclusive entry it
locks the page and restores the original entry after calling mmu notifiers
to signal drivers that exclusive access is no longer available.
The device exclusive entry holds a reference to the page making it safe to
access the struct page whilst the entry is present. However the fault
handling code does not hold the PTL when taking the page lock. This means
if there are multiple threads faulting concurrently on the device
exclusive entry one will remove the entry whilst others will wait on the
page lock without holding a reference.
This can lead to threads locking or waiting on a folio with a zero
refcount. Whilst mmap_lock prevents the pages getting freed via munmap()
they may still be freed by a migration. This leads to warnings such as
PAGE_FLAGS_CHECK_AT_FREE due to the page being locked when the refcount
drops to zero.
Fix this by trying to take a reference on the folio before locking it.
The code already checks the PTE under the PTL and aborts if the entry is
no longer there. It is also possible the folio has been unmapped, freed
and re-allocated allowing a reference to be taken on an unrelated folio.
This case is also detected by the PTE check and the folio is unlocked
without further changes.
Link: https://lkml.kernel.org/r/20230330012519.804116-1-apopple@nvidia.com
Fixes: b756a3b5e7 ("mm: device exclusive memory access")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The finalization of nilfs_segctor_thread() can race with
nilfs_segctor_kill_thread() which terminates that thread, potentially
causing a use-after-free BUG as KASAN detected.
At the end of nilfs_segctor_thread(), it assigns NULL to "sc_task" member
of "struct nilfs_sc_info" to indicate the thread has finished, and then
notifies nilfs_segctor_kill_thread() of this using waitqueue
"sc_wait_task" on the struct nilfs_sc_info.
However, here, immediately after the NULL assignment to "sc_task", it is
possible that nilfs_segctor_kill_thread() will detect it and return to
continue the deallocation, freeing the nilfs_sc_info structure before the
thread does the notification.
This fixes the issue by protecting the NULL assignment to "sc_task" and
its notification, with spinlock "sc_state_lock" of the struct
nilfs_sc_info. Since nilfs_segctor_kill_thread() does a final check to
see if "sc_task" is NULL with "sc_state_lock" locked, this can eliminate
the race.
Link: https://lkml.kernel.org/r/20230327175318.8060-1-konishi.ryusuke@gmail.com
Reported-by: syzbot+b08ebcc22f8f3e6be43a@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/00000000000000660d05f7dfa877@google.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When freeable class stat was added to classes file (back in 2016) we
forgot to update zsmalloc documentation. Fix that.
Link: https://lkml.kernel.org/r/20230325024631.2817153-3-senozhatsky@chromium.org
Fixes: 1120ed5483 ("mm/zsmalloc: add `freeable' column to pool stat")
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "zsmalloc: minor documentation updates".
Two minor patches that bring zsmalloc documentation up to date.
This patch (of 2):
Update documentation and reflect new zspages fullness grouping (we don't
use almost_empty and almost_full anymore).
Link: https://lkml.kernel.org/r/20230325024631.2817153-1-senozhatsky@chromium.org
Link: https://lkml.kernel.org/r/20230325024631.2817153-2-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Fixes: 67e157eb3639 ("zsmalloc: show per fullness group class stats")
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch fixes an issue that a hugetlb uffd-wr-protected mapping can be
writable even with uffd-wp bit set. It only happens with hugetlb private
mappings, when someone firstly wr-protects a missing pte (which will
install a pte marker), then a write to the same page without any prior
access to the page.
Userfaultfd-wp trap for hugetlb was implemented in hugetlb_fault() before
reaching hugetlb_wp() to avoid taking more locks that userfault won't
need. However there's one CoW optimization path that can trigger
hugetlb_wp() inside hugetlb_no_page(), which will bypass the trap.
This patch skips hugetlb_wp() for CoW and retries the fault if uffd-wp bit
is detected. The new path will only trigger in the CoW optimization path
because generic hugetlb_fault() (e.g. when a present pte was
wr-protected) will resolve the uffd-wp bit already. Also make sure
anonymous UNSHARE won't be affected and can still be resolved, IOW only
skip CoW not CoR.
This patch will be needed for v5.19+ hence copy stable.
[peterx@redhat.com: v2]
Link: https://lkml.kernel.org/r/ZBzOqwF2wrHgBVZb@x1n
[peterx@redhat.com: v3]
Link: https://lkml.kernel.org/r/20230324142620.2344140-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20230321191840.1897940-1-peterx@redhat.com
Fixes: 166f3ecc0d ("mm/hugetlb: hook page faults for uffd write protection")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use the maple tree in RCU mode for VMA tracking.
The maple tree tracks the stack and is able to update the pivot
(lower/upper boundary) in-place to allow the page fault handler to write
to the tree while holding just the mmap read lock. This is safe as the
writes to the stack have a guard VMA which ensures there will always be a
NULL in the direction of the growth and thus will only update a pivot.
It is possible, but not recommended, to have VMAs that grow up/down
without guard VMAs. syzbot has constructed a testcase which sets up a VMA
to grow and consume the empty space. Overwriting the entire NULL entry
causes the tree to be altered in a way that is not safe for concurrent
readers; the readers may see a node being rewritten or one that does not
match the maple state they are using.
Enabling RCU mode allows the concurrent readers to see a stable node and
will return the expected result.
[Liam.Howlett@Oracle.com: we don't need to free the nodes with RCU[
Link: https://lore.kernel.org/linux-mm/000000000000b0a65805f663ace6@google.com/
Link: https://lkml.kernel.org/r/20230227173632.3292573-9-surenb@google.com
Fixes: d4af56c5c7 ("mm: start tracking VMAs with maple tree")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: syzbot+8d95422d3537159ca390@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dereferencing RCU objects within the RCU callback without the RCU check
has caused lockdep to complain. Fix the RCU dereferencing by using the
RCU callback lock to ensure the operation is safe.
Also stop creating a new lock to use for dereferencing during destruction
of the tree or subtree. Instead, pass through a pointer to the tree that
has the lock that is held for RCU dereferencing checking. It also does
not make sense to use the maple state in the freeing scenario as the tree
walk is a special case where the tree no longer has the normal encodings
and parent pointers.
Link: https://lkml.kernel.org/r/20230227173632.3292573-8-surenb@google.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add an smp_rmb() before reading the parent pointer to ensure that anything
read from the node prior to the parent pointer hasn't been reordered ahead
of this check.
The is necessary for RCU mode.
Link: https://lkml.kernel.org/r/20230227173632.3292573-7-surenb@google.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During the development of the maple tree, the strategy of freeing multiple
nodes changed and, in the process, the pivots were reused to store
pointers to dead nodes. To ensure the readers see accurate pivots, the
writers need to mark the nodes as dead and call smp_wmb() to ensure any
readers can identify the node as dead before using the pivot values.
There were two places where the old method of marking the node as dead
without smp_wmb() were being used, which resulted in RCU readers seeing
the wrong pivot value before seeing the node was dead. Fix this race
condition by using mte_set_node_dead() which has the smp_wmb() call to
ensure the race is closed.
Add a WARN_ON() to the ma_free_rcu() call to ensure all nodes being freed
are marked as dead to ensure there are no other call paths besides the two
updated paths.
This is necessary for the RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-6-surenb@google.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The call to mte_set_dead_node() before the smp_wmb() already calls
smp_wmb() so this is not needed. This is an optimization for the RCU mode
of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-5-surenb@google.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The walk to destroy the nodes was not always setting the node type and
would result in a destroy method potentially using the values as nodes.
Avoid this by setting the correct node types. This is necessary for the
RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-4-surenb@google.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When initially starting a search, the root node may already be in the
process of being replaced in RCU mode. Detect and restart the walk if
this is the case. This is necessary for RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230227173632.3292573-3-surenb@google.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fix VMA tree modification under mmap read lock".
Syzbot reported a BUG_ON in mm/mmap.c which was found to be caused by an
inconsistency between threads walking the VMA maple tree. The
inconsistency is caused by the page fault handler modifying the maple tree
while holding the mmap_lock for read.
This only happens for stack VMAs. We had thought this was safe as it only
modifies a single pivot in the tree. Unfortunately, syzbot constructed a
test case where the stack had no guard page and grew the stack to abut the
next VMA. This causes us to delete the NULL entry between the two VMAs
and rewrite the node.
We considered several options for fixing this, including dropping the
mmap_lock, then reacquiring it for write; and relaxing the definition of
the tree to permit a zero-length NULL entry in the node. We decided the
best option was to backport some of the RCU patches from -next, which
solve the problem by allocating a new node and RCU-freeing the old node.
Since the problem exists in 6.1, we preferred a solution which is similar
to the one we intended to merge next merge window.
These patches have been in -next since next-20230301, and have received
intensive testing in Android as part of the RCU page fault patchset. They
were also sent as part of the "Per-VMA locks" v4 patch series. Patches 1
to 7 are bug fixes for RCU mode of the tree and patch 8 enables RCU mode
for the tree.
Performance v6.3-rc3 vs patched v6.3-rc3: Running these changes through
mmtests showed there was a 15-20% performance decrease in
will-it-scale/brk1-processes. This tests creating and inserting a single
VMA repeatedly through the brk interface and isn't representative of any
real world applications.
This patch (of 8):
ma_pivots() and ma_data_end() may be called with a dead node. Ensure to
that the node isn't dead before using the returned values.
This is necessary for RCU mode of the maple tree.
Link: https://lkml.kernel.org/r/20230327185532.2354250-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20230227173632.3292573-1-surenb@google.com
Link: https://lkml.kernel.org/r/20230227173632.3292573-2-surenb@google.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjun Roy <arjunroy@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Chris Li <chriscli@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: freak07 <michalechner92@googlemail.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Peter Oskolkov <posk@google.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There's no need for "#address-cells/#size-cells" in the brcm,sf2 node as
no immediate child nodes have an address. What was probably intended was
to put them in the 'ports' node, but that's not necessary as that is
covered by ethernet-switch.yaml via dsa.yaml.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230404204152.635400-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The schema doesn't allow for a single (unaddressed) ethernet port node
nor does a single port switch make much sense. So if there's always
multiple child nodes, "#address-cells" and "#size-cells" should be
required.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230404204213.635773-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Smaller pull request this time, sending this early to fix the conflict
in mac80211. Nothing really special this time, only smaller changes.
Note: We pulled wireless into wireless-next to fix a complicated
conflict in mac80211.
Major changes:
mac80211/cfg80211
* enable Wi-Fi 7 (EHT) mesh support
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmQtVs0RHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZvtRwgAiyCCYwhxj3BXwrtr5u4X+RCAQ/8LSrpu
ju8M7DigiDVUuSX7fS99LGMOBenKLg6S4f2wtj10tKSbr0D4Qjruv6JpERDgvhIn
RDJg8QBB5urGWvI6lKf0K+xWDrpPhb3RV/yCnVQU+3t/B7sLwC2pAJJmyRJNEXaB
sLpAGcbQQizRhHp3gVzuxSmkqnX1KfxehN5f+AeL55U3Jw3+vKmk+Ekd/GXrDEk5
Q8CWcikTthsn2+CTekVNUgg2gQyL9fF1hRwuhPph8Tcxow2SYe3DX+Yj/So25tv/
4Gp+GLdMOAKuPCntOE9A8YHVbA+JLlzbfOwF6g5kgREmagwW6GoyMA==
=zsHH
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.3
Smaller pull request this time, sending this early to fix the conflict
in mac80211. Nothing really special this time, only smaller changes.
* enable Wi-Fi 7 (EHT) mesh support
* tag 'wireless-next-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (37 commits)
wifi: rt2x00: Fix memory leak when handling surveys
wifi: b43legacy: Remove the unused function prev_slot()
wifi: rtw89: Remove redundant pci_clear_master
wifi: rtw89: fix potential race condition between napi_init and napi_enable
wifi: rtw89: config EDCCA threshold during scan to prevent TX failed
wifi: rtw89: fix incorrect channel info during scan due to ppdu_sts filtering
wifi: rtw89: remove superfluous H2C of join_info
wifi: rtw89: set data lowest rate according to AP supported rate
wifi: rtw89: add counters of register-based H2C/C2H
wifi: rtw89: coex: Update Wi-Fi Bluetooth coexistence version to 7.0.1
wifi: rtw89: coex: Add report control v5 variation
wifi: rtw89: coex: Update RTL8852B LNA2 hardware parameter
wifi: rtw89: coex: Not to enable firmware report when WiFi is power saving
wifi: rtw89: coex: Add LPS protocol radio state for RTL8852B
bcma: remove unused mips_read32 function
bcma: Use of_address_to_resource()
wifi: mwifiex: remove unused evt_buf variable
wifi: brcmsmac: ampdu: remove unused suc_mpdu variable
wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_reg()
wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_rfreg()
...
====================
Link: https://lore.kernel.org/r/20230405111037.4792BC43443@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mt76 has a fix for leaking cleartext frames on a certain scenario and
two firmware file handling related fixes. For brcmfmac we have a fix
for an older SDIO suspend regression and for ath11k avoiding a kernel
crash during hibernation with SUSE kernels.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmQtUzQRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuz/wgAlpzStpfnJkVUJRRjCb0yWDPKz+NYYeLh
wQ3Ad+T/KUiav870DlFStRcaZTUi6JyIk61cEnIk6ZB36ivCML6KJ/7GAZFIcI2l
lq/dY8zG2GX0kkSufw24P+6tD3LQguejMv0YHYVUEEXTo4b16dyE5nja2acaOjQI
LDQY6Gq5A/TdMyq9VPLWpPjBJkwEWjexyzJu57A4hExgGZviMAyVWNlBdNOkRn2E
sMt/4ibgchVTxnmHfvS8d+gmEuxiMLi7PHn17gY80kHh2seCc9ODg6EbVxvIi18b
gUj6QXfD9dSJ+ghhV3M7oH+6GLSXDf/c+f1Xy8gupupoQiDxJ+T8UQ==
=mdQP
-----END PGP SIGNATURE-----
Merge tag 'wireless-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.3
mt76 has a fix for leaking cleartext frames on a certain scenario and
two firmware file handling related fixes. For brcmfmac we have a fix
for an older SDIO suspend regression and for ath11k avoiding a kernel
crash during hibernation with SUSE kernels.
* tag 'wireless-2023-04-05' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mt76: ignore key disable commands
wifi: ath11k: reduce the MHI timeout to 20s
wifi: mt76: mt7921: fix fw used for offload check for mt7922
wifi: mt76: mt7921: Fix use-after-free in fw features query.
wifi: brcmfmac: Fix SDIO suspend/resume regression
====================
Link: https://lore.kernel.org/r/20230405105536.4E946C433D2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEDs2BvajyNKlf9TJQvlAcSiqKBOgFAmQtPNcTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRC+UBxKKooE6DYXB/wKpuSPkpn6VHES2Gv3kl1+v3eOSCVI
gt6rNy5HbxcsezYZTbfOzqlh2wxOMdZNDsbG9jDm2W/knwDP01JY0OhQLcxUT6w0
xFgWnoTTkGVtkjPSEE/BL5cy5YMvjbBF2Xn9d6aTDms5BJPdY2mz8NpjITBcf2bd
CLcqCthK2DabZQR9WWVDgGP/q2b+hKDBefioEfX9EbBTAYZ9+0HjMhFl1MdTQ1li
rnva5EFx9XmzqXyBhB+iOZFSgHAxdEF2ZhVN48mDsqAee5jw/COoTv1qc4qMSX79
dCkYP1oTRW39NBkCtw252YbwaYzn9RPhPjPy3kLx7+H/0AWft2ns6wBh
=Dgqo
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.3-20230405' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2023-04-05
The first patch is by Oleksij Rempel and fixes a out-of-bounds memory
access in the j1939 protocol.
The remaining 3 patches target the ISOTP protocol. Oliver Hartkopp
fixes the ISOTP protocol to pass information about dropped PDUs to the
user space via control messages. Michal Sojka's patch fixes poll() to
not forward false EPOLLOUT events. And Oliver Hartkopp fixes a race
condition between isotp_sendsmg() and isotp_release().
* tag 'linux-can-fixes-for-6.3-20230405' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: isotp: fix race between isotp_sendsmg() and isotp_release()
can: isotp: isotp_ops: fix poll() to not report false EPOLLOUT events
can: isotp: isotp_recvmsg(): use sock_recv_cmsgs() to get SOCK_RXQ_OVFL infos
can: j1939: j1939_tp_tx_dat_new(): fix out-of-bounds memory access
====================
Link: https://lore.kernel.org/r/20230405092444.1802340-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
