BUG_ON() will be triggered when writing files concurrently,
because the same page is writtenback multiple times.
1597 void folio_end_writeback(struct folio *folio)
1598 {
......
1618 if (!__folio_end_writeback(folio))
1619 BUG();
......
1625 }
kernel BUG at mm/filemap.c:1619!
Call Trace:
<TASK>
f2fs_write_end_io+0x1a0/0x370
blk_update_request+0x6c/0x410
blk_mq_end_request+0x15/0x130
blk_complete_reqs+0x3c/0x50
__do_softirq+0xb8/0x29b
? sort_range+0x20/0x20
run_ksoftirqd+0x19/0x20
smpboot_thread_fn+0x10b/0x1d0
kthread+0xde/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
Below is the concurrency scenario:
[Process A] [Process B] [Process C]
f2fs_write_raw_pages()
- redirty_page_for_writepage()
- unlock page()
f2fs_do_write_data_page()
- lock_page()
- clear_page_dirty_for_io()
- set_page_writeback() [1st writeback]
.....
- unlock page()
generic_perform_write()
- f2fs_write_begin()
- wait_for_stable_page()
- f2fs_write_end()
- set_page_dirty()
- lock_page()
- f2fs_do_write_data_page()
- set_page_writeback() [2st writeback]
This problem was introduced by the previous commit 7377e85396 ("f2fs:
compress: fix potential deadlock of compress file"). All pagelocks were
released in f2fs_write_raw_pages(), but whether the page was
in the writeback state was ignored in the subsequent writing process.
Let's fix it by waiting for the page to writeback before writing.
Cc: Christoph Hellwig <hch@lst.de>
Fixes: 4c8ff7095b ("f2fs: support data compression")
Fixes: 7377e85396 ("f2fs: compress: fix potential deadlock of compress file")
Signed-off-by: Qi Han <hanqi@vivo.com>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Christoph Hellwig point out:
Please avoid the else by doing the goto in the branch.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If we manage the zone capacity per zone type, it'll break the GC assumption.
And, the current logic complains valid block count mismatch.
Let's apply zone capacity to all zone type, if specified.
Fixes: de881df977 ("f2fs: support zone capacity less than zone size")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It seems inappropriate that the current logic does not handle
filemap_fdatawrite() errors, so let's fix it.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
BIW reduce the s_flag array size and make s_flag constant.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When using f2fs on a zoned block device with 2MiB zone size, IO errors
occurs because f2fs tries to write data to a zone that has not been reset.
The cause is that f2fs tries to discard multiple zones at once. This is
caused by a condition in f2fs_clear_prefree_segments that does not check
for zoned block devices when setting the discard range. This leads to
invalid reset commands and write pointer mismatches.
This patch fixes the zoned block device with 2MiB zone size to reset one
zone at a time.
Signed-off-by: Yonggil Song <yonggil.song@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This is a last part to remove the memory sharing for rb_tree in extent_cache.
This should also fix arm32 memory alignment issue.
[struct extent_node] [struct rb_entry]
[0] struct rb_node rb_node; [0] struct rb_node rb_node;
union { union {
struct { struct {
[16] unsigned int fofs; [12] unsigned int ofs;
unsigned int len; unsigned int len;
};
unsigned long long key;
} __packed;
Cc: <stable@vger.kernel.org>
Fixes: 13054c548a ("f2fs: introduce infra macro and data structure of rb-tree extent cache")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This is a second part to remove the mixed use of rb_tree in discard_cmd from
extent_cache.
This should also fix arm32 memory alignment issue caused by shared rb_entry.
[struct discard_cmd] [struct rb_entry]
[0] struct rb_node rb_node; [0] struct rb_node rb_node;
union { union {
struct { struct {
[16] block_t lstart; [12] unsigned int ofs;
block_t len; unsigned int len;
};
unsigned long long key;
} __packed;
Cc: <stable@vger.kernel.org>
Fixes: 004b686218 ("f2fs: use rb-tree to track pending discard commands")
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Let's reduce the complexity of mixed use of rb_tree in victim_entry from
extent_cache and discard_cmd.
This should fix arm32 memory alignment issue caused by shared rb_entry.
[struct victim_entry] [struct rb_entry]
[0] struct rb_node rb_node; [0] struct rb_node rb_node;
union {
struct {
unsigned int ofs;
unsigned int len;
};
[16] unsigned long long mtime; [12] unsigned long long key;
} __packed;
Cc: <stable@vger.kernel.org>
Fixes: 093749e296 ("f2fs: support age threshold based garbage collection")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When f2fs skipped a gc round during victim migration, there was a bug which
would skip all upcoming gc rounds unconditionally because skipped_gc_rwsem
was not initialized. It fixes the bug by correctly initializing the
skipped_gc_rwsem inside the gc loop.
Fixes: 6f8d445506 ("f2fs: avoid fi->i_gc_rwsem[WRITE] lock in f2fs_gc")
Signed-off-by: Yonggil Song <yonggil.song@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We should set the error code when dqget() failed.
Fixes: 2c1d030569 ("f2fs: support F2FS_IOC_FS{GET,SET}XATTR")
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Let's use BIT() and GENMASK() instead of open it.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After commit 26b5a07919 ("f2fs: cleanup dirty pages if recover failed"),
f2fs_sync_inode_meta() is only used in checkpoint.c, so
f2fs_sync_inode_meta() should only be visible inside. Delete the
declaration in the header file and change f2fs_sync_inode_meta()
to static.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/202211111439357842458@zte.com.cn
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Following process will make ubi attaching failed since commit
1b42b1a36f ("ubi: ensure that VID header offset ... size"):
ID="0xec,0xa1,0x00,0x15" # 128M 128KB 2KB
modprobe nandsim id_bytes=$ID
flash_eraseall /dev/mtd0
modprobe ubi mtd="0,2048" # set vid_hdr offset as 2048 (one page)
(dmesg):
ubi0 error: ubi_attach_mtd_dev [ubi]: VID header offset 2048 too large.
UBI error: cannot attach mtd0
UBI error: cannot initialize UBI, error -22
Rework original solution, the key point is making sure
'vid_hdr_shift + UBI_VID_HDR_SIZE < ubi->vid_hdr_alsize',
so we should check vid_hdr_shift rather not vid_hdr_offset.
Then, ubi still support (sub)page aligined VID header offset.
Fixes: 1b42b1a36f ("ubi: ensure that VID header offset ... size")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Tested-by: Nicolas Schichan <nschichan@freebox.fr>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com> # v5.10, v4.19
Signed-off-by: Richard Weinberger <richard@nod.at>
8b/10b encoding needs to add 3% fec overhead into the pbn.
In the Synapcis Cascaded MST hub, the first stage MST branch device
needs the information to determine the timeslot count for the
second stage MST branch device. Missing this overhead will leads to
insufficient timeslot allocation.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Traditional synaptics hub has one MST branch device without virtual dpcd.
Synaptics cascaded hub has two chained MST branch devices. DSC decoding
is performed via root MST branch device, instead of the second MST branch
device.
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
When returning from of_parse_phandle_with_args(), the np member of the
of_phandle_args structure should be put after usage. Add missing
of_node_put() calls in both __set_clk_parents() and __set_clk_rates().
Fixes: 86be408bfb ("clk: Support for clock parents and rates assigned from device tree")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/r/20230131083227.10990-1-clement.leger@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This does the following code-style changes:
* fix inconsistent indentation in 'struct gab'
* remove unused cable_plugged from 'struct gab'
* remove pointless temporary is_plugged variable
* add gab_ prefix to read_channel
No functionality changes are intended.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Add device context and error code to the error messages to make it
useful.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
jz4740-battery.c and s3c_adc_battery.c have been removed
from the tree and after all of my restructuring the driver
is basically no longer based on them.
Thus update the copyright information and switch to SPDX
license identifier while being at it.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This adds full DT support to the driver. Because of the previous
changes just adding a compatible value is enough.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Another typical thing to monitor via an ADC line is
the battery temperature.
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Drop mostly useless gab_prop_to_chan() function by directly
supplying the correct enum value to read_channel().
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Constant battery data is available through power-supply's simple-battery
API. This works automatically, so the manual handling can be removed
without loosing any feature :)
Note, that the POWER_SUPPLY_STATUS_FULL check for the level variable can
be dropped, since the variable is never written. It can be re-introduced
properly once the driver gets functionality to calculate the current
charge level. Apart from that the check must be done fuzzy anyways,
since charge estimation usually is not precise enough to always return
exactly the full charge capacity for a full battery.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Drop CHARGE_NOW support, which requires a platform specific
calculation method.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Drop support for configuring IRQ jitter delay by using big
enough fixed value.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
power-supply properties are reported in µV, µA and µW.
The IIO API provides mV, mA, mW, so the values need to
be multiplied by 1000.
Fixes: e60fea794e ("power: battery: Generic battery driver using IIO")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Convert driver to use managed resources to simplify driver code.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Automatically expose data from the simple-battery firmware
node for all battery drivers.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Yixin Shen says:
====================
This series allow BPF TCP CCs to write app_limited of struct
tcp_sock. A built-in CC or one from a kernel module is already
able to write to app_limited of struct tcp_sock. Until now,
a BPF CC doesn't have write access to this member of struct
tcp_sock.
v2:
- Merge the test of writing app_limited into the test of
writing sk_pacing. (Martin KaFai Lau)
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Test whether a TCP CC implemented in BPF is allowed to write
app_limited in struct tcp_sock. This is already allowed for
the built-in TCP CC.
Signed-off-by: Yixin Shen <bobankhshen@gmail.com>
Link: https://lore.kernel.org/r/20230329073558.8136-3-bobankhshen@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
A CC that implements tcp_congestion_ops.cong_control() should be able to
write app_limited. A built-in CC or one from a kernel module is already
able to write to this member of struct tcp_sock.
For a BPF program, write access has not been allowed, yet.
Signed-off-by: Yixin Shen <bobankhshen@gmail.com>
Link: https://lore.kernel.org/r/20230329073558.8136-2-bobankhshen@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
No need to pass the iommufd_ucmd pointer.
Link: https://lore.kernel.org/r/20230327093351.44505-2-yi.l.liu@intel.com
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Allow 'rotation' property (coming from panel-common.yaml) already used
in DTS:
sc7180-trogdor-quackingstick-r0.dtb: panel@0: 'rotation' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230326155425.91181-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Panels are supposed to have one reg. This fixes dtbs_check warnings
like:
sc7180-idp.dtb: panel@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230326155425.91181-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Panels are supposed to have one port (coming from panel-common.yaml
binding):
msm8916-samsung-a3u-eur.dtb: panel@0: 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230326155425.91181-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Few panels like Samsung s6e3fc2x01 and sofef00 use vddio-supply instead
of power-supply (in DTS and Linux driver), so allow it to fix:
sdm845-oneplus-enchilada.dtb: panel@0: 'power-supply' is a required property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230326155425.91181-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
The nt36672a bindings were added with a mistake on VDDIO supply calling
it in one place vddio and in other vddi0. Typical name is rather vddio
which is also now used by DTS (sdm845-xiaomi-beryllium-common.dtsi) and
Linux driver.
Fixes: c2abcf30ef ("dt-bindings: display: novatek,nt36672a: Fix unevaluated properties warning")
Fixes: 9528a02430 ("dt-bindings: display: panel: Add bindings for Novatek nt36672a")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230326155425.91181-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
There is nothing special in Innolux p120zdg-bf1 panel, so just like
other Innolux panels it can be made part of panel-simple.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20230326155425.91181-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
for-next contains two additional extensions that select
RISCV_ALTERNATIVE. RISCV_ALTERNATIVE no longer needs to be selected by
individual config options as it is now selected for !XIP_KERNEL builds
by the top level RISCV option.
These extensions rely on the alternative framework, so convert the
"select"s to "depends on"s instead.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230324121240.3594777-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Conor Dooley <conor.dooley@microchip.com> says:
Here's my attempt at fixing both the use of an FPU on XIP kernels and
the issue that Jason ran into where CONFIG_FPU, which needs the
alternatives frame work for has_fpu() checks, could be enabled without
the alternatives actually being present.
For the former, a "slow" fallback that does not use alternatives is
added to riscv_has_extension_[un]likely() that can be used with XIP.
Obviously, we want to make use of Jisheng's alternatives based approach
where possible, so any users of riscv_has_extension_[un]likely() will
want to make sure that they select RISCV_ALTERNATIVE.
If they don't however, they'll hit the fallback path which (should,
sparing a silly mistake from me!) behave in the same way, thus
succeeding silently. Sounds like a
To prevent "depends on !XIP_KERNEL; select RISCV_ALTERNATIVE" spreading
like the plague through the various places that want to check for the
presence of extensions, and sidestep the potential silent "success"
mentioned above, all users RISCV_ALTERNATIVE are converted from selects
to dependencies, with the option being selected for all !XIP_KERNEL
builds.
I know that the VDSO was a key place that Jisheng wanted to use the new
helper rather than static branches, and I think the fallback path
should not cause issues there.
See the thread at [1] for the prior discussion.
1 - https://lore.kernel.org/linux-riscv/20230128172856.3814-1-jszhang@kernel.org/T/#m21390d570997145d31dd8bb95002fd61f99c6573
[Palmer: these were also merged into fixes, but there's a cleanup that
depends on the merge so I'm taking it into for-next as well.]
* b4-shazam-merge:
RISC-V: always select RISCV_ALTERNATIVE for non-xip kernels
RISC-V: add non-alternative fallback for riscv_has_extension_[un]likely()
Link: https://lore.kernel.org/r/20230324100538.3514663-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
* commit '1ee7fc3f4d':
RISC-V: always select RISCV_ALTERNATIVE for non-xip kernels
RISC-V: add non-alternative fallback for riscv_has_extension_[un]likely()
Conor Dooley <conor.dooley@microchip.com> says:
Here's my attempt at fixing both the use of an FPU on XIP kernels and
the issue that Jason ran into where CONFIG_FPU, which needs the
alternatives frame work for has_fpu() checks, could be enabled without
the alternatives actually being present.
For the former, a "slow" fallback that does not use alternatives is
added to riscv_has_extension_[un]likely() that can be used with XIP.
Obviously, we want to make use of Jisheng's alternatives based approach
where possible, so any users of riscv_has_extension_[un]likely() will
want to make sure that they select RISCV_ALTERNATIVE.
If they don't however, they'll hit the fallback path which (should,
sparing a silly mistake from me!) behave in the same way, thus
succeeding silently. Sounds like a
To prevent "depends on !XIP_KERNEL; select RISCV_ALTERNATIVE" spreading
like the plague through the various places that want to check for the
presence of extensions, and sidestep the potential silent "success"
mentioned above, all users RISCV_ALTERNATIVE are converted from selects
to dependencies, with the option being selected for all !XIP_KERNEL
builds.
I know that the VDSO was a key place that Jisheng wanted to use the new
helper rather than static branches, and I think the fallback path
should not cause issues there.
See the thread at [1] for the prior discussion.
1 - https://lore.kernel.org/linux-riscv/20230128172856.3814-1-jszhang@kernel.org/T/#m21390d570997145d31dd8bb95002fd61f99c6573
[Palmer: merging in the fixes as a branch as there's some features that
depend on it.]
* b4-shazam-merge:
RISC-V: always select RISCV_ALTERNATIVE for non-xip kernels
RISC-V: add non-alternative fallback for riscv_has_extension_[un]likely()
Link: https://lore.kernel.org/r/20230324100538.3514663-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Convert platform_get_resource_byname(),devm_ioremap_resource() to a single
call to devm_platform_ioremap_resource_byname(), as this is exactly what
this function does.
Signed-off-by: Ye Xingchen <ye.xingchen@zte.com.cn>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The maximum transfer length is a synthesis configuration parameters of the
Cadence I2C IP. Different SoCs might use different values for these
parameters.
Currently the driver has the maximum transfer length hardcoded to 255.
Trying to use the driver with an IP instance that uses smaller values for
these will work for short transfers. But longer transfers will fail.
The maximum transfer length can easily be detected at runtime since the
unused MSBs of the transfer length register are hardwired to 0. Writing
0xff and then reading back the value will give the maximum transfer length.
These changes have been tested with
1) The Xilinx MPSoC for which this driver was originally written which
has the previous hardcoded settings of 16 and 255.
2) Another instance of the Cadence I2C IP with FIFO depth of 8 and
maximum transfer length of 16.
Without these changes the latter would fail for I2C transfers longer than
16. With the updated driver both work fine even for longer transfers.
Note that the IP core and driver support chaining multiple transfers into a
single longer transfer using the HOLD bit. So the maximum transfer size is
not the limit for the length of the I2C transfer, but the limit for how
much data can be transferred without having to reprogram the control
registers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The FIFO depth is a synthesis configuration parameters of the Cadence I2C
IP. Different SoCs might use different values for these parameters.
Currently the driver has the FIFO depth hardcoded to 16. Trying to use the
driver with an IP instance that uses smaller values for these will work for
short transfers. But longer transfers will fail.
Introduce a new devicetree property that allows to describe the FIFO depth
of the I2C controller.
These changes have been tested with
1) The Xilinx MPSoC for which this driver was originally written which has
the previous hardcoded settings of 16 and 255.
2) Another instance of the Cadence I2C IP with FIFO depth of 8 and maximum
transfer length of 16.
Without these changes the latter would fail for I2C transfers longer than
8. With the updated driver both work fine even for longer transfers.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The depth of the FIFO of the Cadence I2C controller IP is a synthesis
configuration parameter. Different instances of the IP can have different
values. For correct operation software needs to be aware of the size of the
FIFO.
Add the documentation for the devicetree property that describes the FIFO
depth of the IP core.
The default value of 16 is for backwards compatibility reasons with
existing hardware descriptions where this property is not specified and
software has assumed that the FIFO depth is 16.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
