A series by myself to remove CONFIG_SLOB:
The SLOB allocator was deprecated in 6.2 and there have been no
complaints so far so let's proceed with the removal.
Besides the code cleanup, the main immediate benefit will be allowing
kfree() family of function to work on kmem_cache_alloc() objects, which
was incompatible with SLOB. This includes kfree_rcu() which had no
kmem_cache_free_rcu() counterpart yet and now it shouldn't be necessary
anymore.
Otherwise it's all straightforward removal. After this series, 'git grep
slob' or 'git grep SLOB' will have 3 remaining relevant hits in non-mm
code:
- tomoyo - patch submitted and carried there, doesn't need to wait for
this series
- skbuff - patch to cleanup now-unnecessary #ifdefs will be posted to
netdev after this is merged, as requested to avoid conflicts
- ftrace ring_buffer - patch to remove obsolete comment is carried there
The rest of 'git grep SLOB' hits are false positives, or intentional
(CREDITS, and mm/Kconfig SLUB_TINY description to help those that will
happen to migrate later).
The Qualcomm pinctrl driver has been violating the documented meaning
of PIN_CONFIG_INPUT_ENABLE. That documentation says:
Note that this does not affect the pin's ability to drive output.
...yet the Qualcomm driver's sole action when asked to "enable input"
on a pin is to disable its output.
The Qualcomm driver's implementation stems from the fact that
"output-disable" is a "new" property from 2017. It was introduced in
commit 425562429d ("pinctrl: generic: Add output-enable
property"). The "input-enable" handling in Qualcomm drivers is from
2015 introduced in commit 407f5e392f ("pinctrl: qcom: handle
input-enable pinconf property").
Let's change the Qualcomm driver to move us in the right direction. As
part of this:
1. We'll now support PIN_CONFIG_OUTPUT_ENABLE
2. We'll still support using PIN_CONFIG_INPUT_ENABLE to disable a
pin's output (in violation of the docs) with a big comment in the
code. This is needed because old device trees have "input-enable"
in them and, in some cases, people might need the old
behavior. While we could programmatically change all old device
trees, it doesn't really hurt to keep supporting the old behavior
and we're _supposed_ to try to be compatible with old device trees
anyway.
It can also be noted that the PIN_CONFIG_INPUT_ENABLE handling code
seems to have purposefully ignored its argument. That means that old
boards that had _either_ "input-disable" or "input-enable" in them
would have had the effect of disabling a pin's output. While we could
change this behavior, since we're only leaving the
PIN_CONFIG_INPUT_ENABLE there for backward compatibility we might as
well be fully backward compatible.
NOTE: despite the fact that we'll still support
PIN_CONFIG_INPUT_ENABLE for _setting_ config, we take it away from
msm_config_group_get(). This appears to be only used for populating
debugfs and fixing debugfs to "output enabled" where relevant instead
of "input enabled" makes more sense and has more truthiness.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230323102605.8.Id740ae6a993f9313b58add6b10f6a92795d510d4@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In the patch ("dt-bindings: pinctrl: qcom: tlmm should use
output-disable, not input-enable") we allowed setting "output-disable"
for TLMM pinctrl states. Let's also add "output-enable".
At first blush this seems a needless thing to do. Specifically:
- In Linux (and presumably any other OSes using the same device trees)
the GPIO/pinctrl driver knows to automatically enable the output
when a GPIO is changed to an output. Thus in most cases specifying
"output-enable" is superfluous and should be avoided.
- If we need to set a pin's default state we already have
"output-high" and "output-low" and these properties already imply
"output-enabled" (at least on the Linux Qualcomm TLMM driver).
However, there is one instance where "output-enable" seems like it
could be useful: sleep states. It's not uncommon to want to configure
pins as inputs (with appropriate pulls) when the driver controlling
them is in a low power state. Then we want the pins back to outputs
when the driver wants things running normally. To accomplish this we'd
want to be able to use "output-enable". Then the "default" state could
have "output-enable" and the "sleep" state could have
"output-disable".
NOTE: in all instances I'm aware of, we'd only want to use
"output-enable" on pins that are configured as "gpio". The Qualcomm
documentation that I have access to says that "output-enable" only
does something useful when in GPIO mode.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230323102605.7.I7874c00092115c45377c2a06f7f133356956686e@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
As evidenced by the Qualcomm TLMM Linux driver, the TLMM IP block in
Qualcomm SoCs has a bit to enable/disable the output for a pin that's
configured as a GPIO but _not_ a bit to enable/disable an input
buffer. Current device trees that are specifying "input-enable" for
pins managed by TLMM are either doing so needlessly or are using it to
mean "output-disable".
Presumably the current convention of using "input-enable" to mean
"output-disable" stems from the fact that "output-disable" is a "new"
property from 2017. It was introduced in commit 425562429d
("pinctrl: generic: Add output-enable property"). The "input-enable"
handling in Qualcomm drivers is from 2015 introduced in commit
407f5e392f ("pinctrl: qcom: handle input-enable pinconf property").
Given that there's no other use for "input-enable" for TLMM, we can
still handle old device trees in code, but let's encourage people to
move to the proper / documented property by updating the bindings.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230323102605.6.I291ce0ba2c6ea80b341659c4f75a567a76dd7ca6@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cleanup bindings dropping unneeded quotes. Once all these are fixed,
checking for this can be enabled in yamllint.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230327170137.4104272-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we set the dual-role port to Host mode, we observed the following
splat:
[ 167.057718] BUG: sleeping function called from invalid context at
include/linux/sched/mm.h:229
[ 167.057872] Workqueue: events tegra_xusb_usb_phy_work
[ 167.057954] Call trace:
[ 167.057962] dump_backtrace+0x0/0x210
[ 167.057996] show_stack+0x30/0x50
[ 167.058020] dump_stack_lvl+0x64/0x84
[ 167.058065] dump_stack+0x14/0x34
[ 167.058100] __might_resched+0x144/0x180
[ 167.058140] __might_sleep+0x64/0xd0
[ 167.058171] slab_pre_alloc_hook.constprop.0+0xa8/0x110
[ 167.058202] __kmalloc_track_caller+0x74/0x2b0
[ 167.058233] kvasprintf+0xa4/0x190
[ 167.058261] kasprintf+0x58/0x90
[ 167.058285] tegra_xusb_find_port_node.isra.0+0x58/0xd0
[ 167.058334] tegra_xusb_find_port+0x38/0xa0
[ 167.058380] tegra_xusb_padctl_get_usb3_companion+0x38/0xd0
[ 167.058430] tegra_xhci_id_notify+0x8c/0x1e0
[ 167.058473] notifier_call_chain+0x88/0x100
[ 167.058506] atomic_notifier_call_chain+0x44/0x70
[ 167.058537] tegra_xusb_usb_phy_work+0x60/0xd0
[ 167.058581] process_one_work+0x1dc/0x4c0
[ 167.058618] worker_thread+0x54/0x410
[ 167.058650] kthread+0x188/0x1b0
[ 167.058672] ret_from_fork+0x10/0x20
The function tegra_xusb_padctl_get_usb3_companion eventually calls
tegra_xusb_find_port and this in turn calls kasprintf which might sleep
and so cannot be called from an atomic context.
Fix this by moving the call to tegra_xusb_padctl_get_usb3_companion to
the tegra_xhci_id_work function where it is really needed.
Fixes: f836e78430 ("usb: xhci-tegra: Add OTG support")
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Link: https://lore.kernel.org/r/20230327095548.1599470-1-haotienh@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This will make it easier to free objects in situations when they can
come from either kmalloc() or kmem_cache_alloc(), and also allow
kfree_rcu() for freeing objects from kmem_cache_alloc().
For the SLAB and SLUB allocators this was always possible so with SLOB
gone, we can document it as supported.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
The USS720 parport driver source code is in drivers/usb/misc/, the
corresponding config is defined in drivers/usb/Kconfig. Some digging in the
kernel's history revealed no good reason why it needs to be defined in
USB's top-level Kconfig file, and why the config for the USS720 parport
driver should be the first in the list of USB port drivers, while all other
configs for drivers in drivers/usb/misc are in the USB Miscellaneous driver
configuration file.
Most probably, it was simply considered a bit more special when the USB
Miscellaneous driver configuration file (drivers/usb/misc/Config.in back
then) was initially created, and this config simply survived to remain at
the top-level USB Kconfig file with all further code/Kconfig
transformations and additions later on. Users rarely notice this config
being at this position, as CONFIG_PARPORT (Parallel port support) needs to
be enabled and only few users enable that. Nowadays, this USB_USS720 driver
is probably not that special that it needs to be listed as first item of
the USB port drivers.
Move the configuration of the USS720 parport driver to the top of the USB
Miscellaneous drivers section, as the configurations does not have a lot of
specific ordering USB Miscellaneous drivers. This way, the USS720 parport
driver is moved to the comment "USB Miscellaneous drivers", fitting to the
driver's source code location, but still is at the top of the list for
those few acquainted users of Kconfig UIs that might be looking for the
config that was once at the top of the list of the USB port drivers.
Put this config definition to a more local place. No semantic change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20230329075125.32352-1-lukas.bulwahn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_SLOB has been removed from Kconfig. Remove code and #ifdef's
specific to SLOB in the slab headers and common code.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
SLOB has been removed and SLQB never merged, so remove their mentions
from comments and documentation of pagemap.
In stable_page_flags() also correct an outdated comment mentioning that
PageBuddy() means a page->_refcount of -1, and remove compound_head()
from the PageSlab() call, as that's already implicitly there thanks to
PF_NO_TAIL.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
With SLOB removed we no longer need the PG_slob_free alias for
PG_private. Also update tools/mm/page-types.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Remove SLOB from Kconfig and Makefile. Everything under #ifdef
CONFIG_SLOB, and mm/slob.c is now dead code.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
When host sends suspend notification to the device, handle
the suspend callbacks in the function driver. Depending on
the remote wakeup capability the device can either trigger a
remote wakeup or wait for the host initiated resume to resume
data transfer.
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/1679694482-16430-7-git-send-email-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When host sends function suspend feature selector to the device,
inspect the received packet and trigger function suspend or
function resume accordingly. Inspect the remote wakeup bit and
arm the function for remote wakeup if it is wakeup capable. Also
host queries the function wakeup capability through a get status
request before sending function resume. Handle such requests in
composite layer.
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/1679694482-16430-6-git-send-email-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB host sends function suspend and function resume notifications to
the interface through SET_FEATURE/CLEAR_FEATURE setup packets.
Add support to handle these packets by delegating the requests to
composite layer. Also add support to handle function wake notification
requests to exit from function suspend state.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Link: https://lore.kernel.org/r/1679694482-16430-5-git-send-email-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
USB3.2 spec section 9.2.5.4 quotes that a function may signal that
it wants to exit from Function Suspend by sending a Function
Wake Notification to the host if it is enabled for function
remote wakeup. Add an api in composite layer that can be used
by the function drivers to support this feature. Also expose
a gadget op so that composite layer can trigger a wakeup request
to the UDC driver.
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Link: https://lore.kernel.org/r/1679694482-16430-4-git-send-email-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
An usb device can initate a remote wakeup and bring the link out of
suspend as dictated by the DEVICE_REMOTE_WAKEUP feature selector.
Add support to handle this packet and set the remote wakeup capability.
Some hosts may take longer time to initiate the resume signaling after
device triggers a remote wakeup. So add async support to the wakeup API
by enabling link status change events.
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Link: https://lore.kernel.org/r/1679694482-16430-3-git-send-email-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The wakeup bit in the bmAttributes field indicates whether the device
is configured for remote wakeup. But this field should be allowed to
set only if the UDC supports such wakeup mechanism. So configure this
field based on UDC capability. Also inform the UDC whether the device
is configured for remote wakeup by implementing a gadget op.
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Link: https://lore.kernel.org/r/1679694482-16430-2-git-send-email-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the binding to DT schema format. To fix the dtbs_check
error, some properties were also added, such as nvidia,phy, reset-names
ulpi; missing compatibles are added.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230322052504.2629429-3-peng.fan@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ModemManger/Apps probing the wwan0xmmrpc0 port for 7560 Modem results in
modem crash.
7560 Modem FW uses the MBIM interface for control command communication
whereas 7360 uses Intel RPC interface so disable wwan0xmmrpc0 port for
7560.
Fixes: d08b0f8f46 ("net: wwan: iosm: add rpc interface for xmm modems")
Reported-and-tested-by: Martin <mwolf@adiumentum.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217200
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: Shane Parslow <shaneparslow808@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The HNS3 driver supports Wake-on-LAN, which can wake up
the server from power off state to power on state by magic
packet or magic security packet.
ChangeLog:
v1->v2:
Deleted the debugfs function that overlaps with the ethtool function
from suggestion of Andrew Lunn.
v2->v3:
Return the wol configuration stored in driver,
suggested by Alexander H Duyck.
v3->v4:
Add a helper to go from netdev to the local struct,
suggested by Simon Horman and Jakub Kicinski.
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For obvious reasons, we use compressed bpp instead of pipe bpp for
DSC DP SST case. Lets be consistent and use compressed bpp instead of
pipe bpp, also in DP MST DSC case.
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Fixes: d51f25eb47 ("drm/i915: Add DSC support to MST path")
Link: https://patchwork.freedesktop.org/patch/msgid/20230327064217.24033-1-stanislav.lisovskiy@intel.com
Edward Cree says:
====================
sfc: support TC decap rules
This series adds support for offloading tunnel decapsulation TC rules to
ef100 NICs, allowing matching encapsulated packets to be decapsulated in
hardware and redirected to VFs.
For now an encap match must be on precisely the following fields:
ethertype (IPv4 or IPv6), source IP, destination IP, ipproto UDP,
UDP destination port. This simplifies checking for overlaps in the
driver; the hardware supports a wider range of match fields which
future driver work may expose.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A 'foreign' rule is one for which the net_dev is not the sfc netdevice
or any of its representors. The driver registers indirect flow blocks
for tunnel netdevs so that it can offload decap rules. For example:
tc filter add dev vxlan0 parent ffff: protocol ipv4 flower \
enc_src_ip 10.1.0.2 enc_dst_ip 10.1.0.1 \
enc_key_id 1000 enc_dst_port 4789 \
action tunnel_key unset \
action mirred egress redirect dev $REPRESENTOR
When notified of a rule like this, register an encap match on the IP
and dport tuple (creating an Outer Rule table entry) and insert an MAE
action rule to perform the decapsulation and deliver to the representee.
Moved efx_tc_delete_rule() below efx_tc_flower_release_encap_match() to
avoid the need for a forward declaration.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a hashtable to detect duplicate and conflicting matches. If match
is not a duplicate, call MAE functions to add/remove it from OR table.
Calling code not added yet, so mark the new functions as unused.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An encap match corresponds to an entry in the exact-match Outer Rule
table; the lookup response includes the encap type (protocol) allowing
the hardware to continue parsing into the inner headers.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Translate the fields from flow dissector into struct efx_tc_match.
In efx_tc_flower_replace(), reject filters that match on them, because
only 'foreign' filters (i.e. those for which the ingress dev is not
the sfc netdev or any of its representors, e.g. a tunnel netdev) can
use them.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend the MAE caps check to validate that the hardware supports these
outer-header matches where used by the driver.
Extend efx_mae_populate_match_criteria() to fill in the outer rule ID
and VNI match fields.
Nothing yet populates these match fields, nor creates outer rules.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Includes an explanation of the lifetime of the 'cursor' action-set `act`.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a couple of places it seems reasonable to use MEGA intead
of explicit number. It makes code more readable and robust.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
In the snippets like the following
if (...)
return / goto / break / continue ...;
else
...
the 'else' is redundant. Get rid of it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Herbert Xu says:
====================
macvlan: Allow some packets to bypass broadcast queue
This patch series allows some packets to bypass the broadcast
queue on receive. Currently all multicast packets are queued
on receive and then processed in a work queue. This is to avoid
an unbounded amount of work occurring in the receive path, as
one broadcast packet could easily translate into 4,000 packets.
However, for multicast packets with just one receiver (possible
for IPv6 ND), this introduces unnecessary latency as the packet
will go to exactly one device.
This series allows such multicast packets to be processed inline.
It also adds a toggle which lets the admin control what threshold
to set between queueing and not queueing. A follow-up patch for
iproute will be posted.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the broadcast cutoff configurable through netlink. Note
that macvlan is weird because there is no central device for
us to configure (the lowerdev could be anything). So all the
options are duplicated over what could be thousands of child
devices.
IFLA_MACVLAN_BC_QUEUE_LEN took the approach of taking the maximum
of all child device settings. This is unnecessary as we could
simply store the option in the port device and take the last
child device that gets updated as the value to use.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
As it stands all broadcast and multicast packets are queued and
processed in a work queue. This is so that we don't overwhelm
the receive softirq path by generating thousands of packets or
more (see commit 412ca1550c "macvlan: Move broadcasts into a
work queue").
As such all multicast packets will be delayed, even if they will
be received by a single macvlan device. As using a workqueue
is not free in terms of latency, we should avoid this where possible.
This patch adds a new filter to determine which addresses should
be delayed and which ones won't. This is done using a crude
counter of how many times an address has been added to the macvlan
port (ha->synced). For now if an address has been added more than
once, then it will be considered to be broadcast. This could be
tuned further by making this threshold configurable.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts says:
====================
mptcp: a couple of cleanups and improvements
Patch 1 removes an unneeded address copy in subflow_syn_recv_sock().
Patch 2 simplifies subflow_syn_recv_sock() to postpone some actions and
to avoid a bunch of conditionals.
Patch 3 stops reporting limits that are not taken into account when the
userspace PM is used.
Patch 4 adds a new test to validate that the 'subflows' field reported
by the kernel is correct. Such info can be retrieved via Netlink (e.g.
with ss) or getsockopt(SOL_MPTCP, MPTCP_INFO).
---
Changes in v2:
- Patch 3/4's commit message has been updated to use the correct SHA
- Rebased on latest net-next
- Link to v1: https://lore.kernel.org/r/20230324-upstream-net-next-20230324-misc-features-v1-0-5a29154592bd@tessares.net
====================
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the mptcp_info fields tests in endpoint_tests(). Add a
new function chk_mptcp_info() to check the given number of the given
mptcp_info field.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/330
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only the in-kernel PM uses the number of address and subflow limits
allowed per connection.
It then makes more sense not to display such info when other PMs are
used not to confuse the userspace by showing limits not being used.
While at it, we can get rid of the "val" variable and add indentations
instead.
It would have been good to have done this modification directly in
commit 4d25247d3a ("mptcp: bypass in-kernel PM restrictions for non-kernel PMs")
but as we change a bit the behaviour, it is fine not to backport it to
stable.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
