With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
warning in clang aims to catch these at compile time, which reveals:
drivers/net/ethernet/pasemi/pasemi_mac.c:1665:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict]
.ndo_start_xmit = pasemi_mac_start_tx,
^~~~~~~~~~~~~~~~~~~
1 error generated.
->ndo_start_xmit() in 'struct net_device_ops' expects a return type of
'netdev_tx_t', not 'int'. Adjust the return type of
pasemi_mac_start_tx() to match the prototype's to resolve the warning.
While PowerPC does not currently implement support for kCFI, it could in
the future, which means this warning becomes a fatal CFI failure at run
time.
Link: https://github.com/ClangBuiltLinux/linux/issues/1750
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230319-pasemi-incompatible-pointer-types-strict-v1-1-1b9459d8aef0@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Adds support for a low-power Hibernation State.
Add support for a low-power hibernation state for the DSP. In
this state the DSP RAM contents are maintained, such that
firmware does not need to be re-downloaded, but the rest of the
chip's register state is lost.
Entry to this state is achieved via the register interface
(either by an external driver using the control port, or the
programmable DSP). Exit from this state is triggered by activity
on device GPIO pins, intended SPI transaction, or I2C
transaction with intended slave address.
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Link: https://lore.kernel.org/r/167933511185.26.10641185496218226278@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS35L45 digital core incorporates one programmable DSP block,
capable of running a wide range of audio enhancement and speaker
and battery protection functions.
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Link: https://lore.kernel.org/r/167933510679.26.5992985447093367768@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The Geneve encapsulation, as defined in RFC 8926, has a Protocol Type
field, which states the Ethertype of the payload appearing after the
Geneve header.
Commit 435fe1c0c1 ("net: geneve: support IPv4/IPv6 as inner protocol")
introduced a new IFLA_GENEVE_INNER_PROTO_INHERIT flag that allowed the
use of other Ethertypes than Ethernet. However, it did not get rid of a
restriction that prohibits receiving payloads other than Ethernet,
instead the commit white-listed additional Ethertypes, IPv4 and IPv6.
This patch removes this restriction, making it possible to receive any
Ethertype as a payload, if the IFLA_GENEVE_INNER_PROTO_INHERIT flag is
set.
The restriction was set in place back in commit 0b5e8b8eea
("net: Add Geneve tunneling protocol driver"), which implemented a
protocol layer driver for Geneve to be used with Open vSwitch. The
relevant discussion about introducing the Ethertype white-list can be
found here:
https://lore.kernel.org/netdev/CAEP_g=_1q3ACX5NTHxLDnysL+dTMUVzdLpgw1apLKEdDSWPztw@mail.gmail.com/
<quote>
>> + if (unlikely(geneveh->proto_type != htons(ETH_P_TEB)))
>
> Why? I thought the point of geneve carrying protocol field was to
> allow protocols other than Ethernet... is this temporary maybe?
Yes, it is temporary. Currently OVS only handles Ethernet packets but
this restriction can be lifted once we have a consumer that is capable
of handling other protocols.
</quote>
This white-list was then ported to a generic Geneve netdevice in commit
371bd1061d ("geneve: Consolidate Geneve functionality in single
module."). Preserving the Ethertype white-list at this point made sense,
as the Geneve device could send out only Ethernet payloads anyways.
However, now that the Geneve netdevice supports encapsulating other
payloads with IFLA_GENEVE_INNER_PROTO_INHERIT and we have a consumer
capable of other protocols, it seems appropriate to lift the restriction
and allow any Geneve payload to be received.
Signed-off-by: Josef Miegl <josef@miegl.cz>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
Link: https://lore.kernel.org/r/20230319220954.21834-1-josef@miegl.cz
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When bringing up a secondary CPU from do_boot_cpu(), the warm reset flag
is set in CMOS and the starting IP for the trampoline written inside the
BDA at 0x467. Once the CPU is running, the CMOS flag is unset and the
value in the BDA cleared.
To allow for parallel bringup of CPUs, add a reference count to track the
number of CPUs currently bring brought up, and clear the state only when
the count reaches zero.
Since the RTC spinlock is required to write to the CMOS, it can be used
for mutual exclusion on the refcount too.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Link: https://lore.kernel.org/r/20230316222109.1940300-5-usama.arif@bytedance.com
Given its CPU#, each CPU can find its own per-cpu offset, and directly set
GSBASE accordingly. The global variable can be eliminated.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Usama Arif <usama.arif@bytedance.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20230316222109.1940300-9-usama.arif@bytedance.com
Build the GDT descriptor on the stack instead.
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Usama Arif <usama.arif@bytedance.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20230316222109.1940300-8-usama.arif@bytedance.com
In order to facilitate parallel startup, start to eliminate some of the
global variables passing information to CPUs in the startup path.
However, start by introducing one more: smpboot_control. For now this
merely holds the CPU# of the CPU which is coming up. Each CPU can then
find its own per-cpu data, and everything else it needs can be found
from there, allowing the other global variables to be removed.
First to be removed is initial_stack. Each CPU can load %rsp from its
current_task->thread.sp instead. That is already set up with the correct
idle thread for APs. Set up the .sp field in INIT_THREAD on x86 so that
the BSP also finds a suitable stack pointer in the static per-cpu data
when coming up on first boot.
On resume from S3, the CPU needs a temporary stack because its idle task
is already active. Instead of setting initial_stack, the sleep code can
simply set its own current->thread.sp to point to the temporary stack.
Nobody else cares about ->thread.sp for a thread which is currently on
a CPU, because the true value is actually in the %rsp register. Which
is restored with the rest of the CPU context in do_suspend_lowlevel().
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Usama Arif <usama.arif@bytedance.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lore.kernel.org/r/20230316222109.1940300-7-usama.arif@bytedance.com
Each of the sibling CPUs in a cluster uses the same clustermask. The first
CPU in a cluster will need a new clustermask allocated, while subsequent
siblings will use the same clustermask as the first.
However, the CPU being brought up cannot yet perform memory allocations
at the point that this occurs in init_x2apic_ldr().
So at present, the alloc_clustermask() function allocates a clustermask
just in case it's needed, storing it in the global cluster_hotplug_mask.
A CPU which is the first sibling of a cluster will "take" it from there
and set cluster_hotplug_mask to NULL, in order for alloc_clustermask()
to allocate a new one before bringing up the next CPU.
To facilitate parallel bringup of CPUs in future, switch to a model
where alloc_clustermask() prepopulates the clustermask in the per_cpu
data for each present CPU in the cluster in advance. All that the CPU
needs to do for itself in init_x2apic_ldr() is set its own bit in that
mask.
The 'node' and 'clusterid' members of struct cluster_mask are thus
redundant, and it can become a simple struct cpumask instead.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Kim Phillips <kim.phillips@amd.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Link: https://lore.kernel.org/r/20230316222109.1940300-2-usama.arif@bytedance.com
CoreSight ETM4x architecture clearly provides ways to identify a device
via registers in the "Management" class, TRCDEVARCH and TRCDEVTYPE. These
registers can be accessed without the Trace domain being powered on.
We additionally added TRCIDR1 as fallback in order to cover for any
ETMs that may not have implemented TRCDEVARCH. So far, nobody has
reported hitting a WARNING we placed to catch such systems.
Also, more importantly it is problematic to access TRCIDR1, which is a
"Trace" register via MMIO access, without clearing the OSLK. But we cannot
mess with the OSLK until we know for sure that this is an ETMv4 device.
Thus, this kind of creates a chicken and egg problem unnecessarily for
systems "which are compliant" to the ETMv4 architecture.
Let us remove the TRCIDR1 fall back check and rely only on TRCDEVARCH.
Fixes: 8b94db1eda ("coresight: etm4x: Use TRCDEVARCH for component discovery")
Cc: stable@vger.kernel.org
Reported-by: Steve Clevenger <scclevenger@os.amperecomputing.com>
Link: https://lore.kernel.org/all/143540e5623d4c7393d24833f2b80600d8d745d2.1677881753.git.scclevenger@os.amperecomputing.com/
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20230321104530.1547136-1-suzuki.poulose@arm.com
BCM63xx RGMII ports require additional configuration in order to work.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230319220805.124024-1-noltari@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
pcs_get_state() implementations are not supposed to alter an_enabled.
Remove this assignment.
Fixes: b3591c2a36 ("net: dsa: qca8k: Switch to PHYLINK instead of PHYLIB")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1pdsE5-00Dl2l-8F@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The encryption algorithms read and write directly to shared unencrypted
memory, which may leak information as well as permit the host to tamper
with the message integrity. Instead, copy whole messages in or out as
needed before doing any computation on them.
Fixes: d5af44dde5 ("x86/sev: Provide support for SNP guest request NAEs")
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230214164638.1189804-3-dionnaglaze@google.com
Add logic for setting up and tearing down chained DMA connections.
Since pipelines are not used, all the logic to set the pipeline states
can be bypassed, with only the DMA programming sequences remaining. In
addition the same format needs to be used for host- and link-DMA,
without the usual fixup to use the S32_LE format on the link.
Note however that for convenience and compatibility with existing
definitions, the topology relies on the concept of pipelines with a
'USE_CHAIN_DMA' token indicating that all the logic shall be bypassed.
Unlike 'normal' ALSA sequences, the chain DMA is not programmed in
hw_params/hw_free. The IPC message to set-up and tear-down chained DMA
are sent in sof_ipc4_trigger_pipelines(), but the contents prepared
earlier.
Chained DMA is only supported by the Intel HDA DAI for now, and only
S16_LE and S32_LE formats are supported for now.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230321092654.7292-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the chained DMA mode, the firmware allocates buffers for the host
and link DMA, and takes care of copying data between host- and
link-DMA buffers in a low-latency thread. This is different to a
regular pipeline, no processing is allowed, and the connection between
host- and link DMA is handled with a dedicated IPC.
This patch exposes the macros needed to create the required IPC messages.
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230321092654.7292-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set up the IPC structure for scheduler widgets and set the pipeline widget
before updating the IPC structures for all widgets. This will be needed to
look up pipeline information during IPC structure set up.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Jyri Sarha <jyri.sarha@intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230321092654.7292-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS35L56 combines a high-performance mono audio amplifier, Class-H
tracking inductive boost converter, Halo Core(TM) DSP and a DC-DC boost
converter supporting Class-H tracking.
Supported control interfaces are I2C, SPI or SoundWire.
Supported audio interfaces are I2S/TDM or SoundWire.
Most chip functionality is controlled by on-board ROM firmware that is
always running. The driver must apply patch/tune to the firmware
before using the CS35L56.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230320112245.115720-9-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This change makes the logging of firmware files more consistent and
simplifies the code - a debug message is logged whether the requested
file was found or not and this applies to both wmfw and bin files.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230320112245.115720-8-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A self-booted DSP may have a file of coefficients to apply to the device
even when there is no firmware to download.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230320112245.115720-7-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To support self-booting DSPs that are considered always running, the work
that is usually invoked as part of a DAPM sequence needs to be triggered
by a client of wm_adsp as part of it's startup sequence.
These actions load firmware files that might create ALSA controls and
apply configuration to the device.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230320112245.115720-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When a DSP can self-boot from ROM it is not necessary to download
firmware - when the DSP has the wmfw_optional flag set not finding a
wmfw firmware file is a successful outcome and not an error condition.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/167931140130.26.15590061696793062038@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When a DSP can self-boot from ROM it is not necessary to download
firmware during the powering up sequence.
A DSP that required firmware download would fail in a previous
configuration step if firmware was not available.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230320112245.115720-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The no_core_startstop flag indicates a self-booting DSP - they are
considered to be always running and therefore cannot be pre-loaded.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230320112245.115720-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are devices containing Halo Core DSPs that self-boot, cs_dsp is
used to manage the running firmware but the host does not have direct
control over starting and stopping the DSP and so cs_dsp should consider
the DSP to be always running.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230320112245.115720-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 2c7e46edbd ("net: dsa: mv88e6xxx: mask apparently non-existing
phys during probing") added non-trivial bus->phy_mask in
mv88e6xxx_mdio_register() in order to avoid excessive mdio bus
transactions during probing.
But the mask is incorrect for switches with non-zero phy_base_addr (such
as 88E6341).
Fix this.
Fixes: 2c7e46edbd ("net: dsa: mv88e6xxx: mask apparently non-existing phys during probing")
Signed-off-by: Marek Behún <kabel@kernel.org>
Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230319140238.9470-1-kabel@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
__enter_from_user_mode() is triggering noinstr warnings with
CONFIG_DEBUG_PREEMPT due to its call of preempt_count_add() via
ct_state().
The preemption disable isn't needed as interrupts are already disabled.
And the context_tracking_enabled() check in ct_state() also isn't needed
as that's already being done by the CT_WARN_ON().
Just use __ct_state() instead.
Fixes the following warnings:
vmlinux.o: warning: objtool: enter_from_user_mode+0xba: call to preempt_count_add() leaves .noinstr.text section
vmlinux.o: warning: objtool: syscall_enter_from_user_mode+0xf9: call to preempt_count_add() leaves .noinstr.text section
vmlinux.o: warning: objtool: syscall_enter_from_user_mode_prepare+0xc7: call to preempt_count_add() leaves .noinstr.text section
vmlinux.o: warning: objtool: irqentry_enter_from_user_mode+0xba: call to preempt_count_add() leaves .noinstr.text section
Fixes: 171476775d ("context_tracking: Convert state to atomic_t")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/d8955fa6d68dc955dda19baf13ae014ae27926f5.1677369694.git.jpoimboe@kernel.org
Like the Windows Lenovo Yoga Book X91F/L the Android Lenovo Yoga Book
X90F/L has a portrait 1200x1920 screen used in landscape mode,
add a quirk for this.
When the quirk for the X91F/L was initially added it was written to
also apply to the X90F/L but this does not work because the Android
version of the Yoga Book uses completely different DMI strings.
Also adjust the X91F/L quirk to reflect that it only applies to
the X91F/L models.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301095218.28457-1-hdegoede@redhat.com
The PSP can return a "firmware error" code of -1 in circumstances where
the PSP has not actually been called. To make this protocol unambiguous,
name the value SEV_RET_NO_FW_CALL.
[ bp: Massage a bit. ]
Signed-off-by: Peter Gonda <pgonda@google.com>
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20221207010210.2563293-2-dionnaglaze@google.com
The pipe may differ from crtc index if pipes are fused off. For testing
purposes, IGT needs to know the pipe.
There's already a I915_GET_PIPE_FROM_CRTC_ID IOCTL for this. However,
the upcoming Xe driver won't have that IOCTL, and going forward, we'll
want a unified interface for testing i915 and Xe, as they share the
display code. Thus add the debugfs for i915 display.
v2: User letters for pipe names (Ville)
Cc: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320124429.786985-2-jani.nikula@intel.com
A platform device's .remove() callback is only ever called after
.probe() successfully completed. After such a successful call,
platform_get_drvdata() doesn't return NULL. Simplify accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230321101911.342538-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Don't break strings over two (or more) lines
- Put the , separating function args at the end of line
- Replace
if (cond) {} else { ... }
by
if (!cond) { ... }
- Consistently use curly braces in all blocks belonging to the same if
if at least one block needs them.
- Don't start a new line just for );
There are no semantic changes.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230321101911.342538-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert the crtc debugfs code to use struct intel_crtc instead of struct
drm_crtc.
v2: Fix build for CONFIG_DRM_I915_DEBUG_VBLANK_EVADE=y (kernel test robot)
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320124429.786985-1-jani.nikula@intel.com
The commit 82a149a62b ("drm/i915/gt: move remaining debugfs
interfaces into gt") moved gt-related debugfs files in the gtX/
directories to operate on individual gt's.
However, the original files were only functioning on the root
GT (GT 0) and have been left in the same location to maintain
compatibility with userspace users.
Add multiplexing functionality to the higher directories' files.
This enables the operations to be performed on all the GTs with
a single write. In the case of reads, the files provide an or'ed
value across all the tiles.
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Maciej Patelczyk <maciej.patelczyk@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230318203616.183765-4-andi.shyti@linux.intel.com
To support multi-GT configurations, we need to generate
independent debug files for each GT.
To achieve this create a separate directory for each GT under the
debugfs directory. For instance, in a system with two GTs, the
debugfs structure would look like this:
/sys/kernel/debug/dri
└── 0
├── gt0
│ ├── drpc
│ ├── engines
│ ├── forcewake
│ ├── frequency
│ └── rps_boost
└── gt1
: ├── drpc
: ├── engines
: ├── forcewake
├── frequency
└── rps_boost
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230318203616.183765-2-andi.shyti@linux.intel.com
Zero-length arrays as fake flexible arrays are deprecated and we are
moving towards adopting C99 flexible-array members instead.
Address the following warning found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
drivers/gpu/drm/i915/gem/i915_gem_context.c: In function ‘set_proto_ctx_engines.isra’:
drivers/gpu/drm/i915/gem/i915_gem_context.c:769:41: warning: array subscript n is outside array bounds of ‘struct i915_engine_class_instance[0]’ [-Warray-bounds=]
769 | if (copy_from_user(&ci, &user->engines[n], sizeof(ci))) {
| ^~~~~~~~~~~~~~~~~
./include/uapi/drm/i915_drm.h:2494:43: note: while referencing ‘engines’
2494 | struct i915_engine_class_instance engines[0];
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/271
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZBSu2QsUJy31kjSE@work
Expose intel_rps_read_actual_frequency_fw to read the actual freq without
taking forcewake for use by PMU. The code is refactored to use a common set
of functions across sysfs and PMU. Using common functions with sysfs in PMU
solves the issues of missing support for MTL and missing support for older
generations (prior to Gen6). It also future proofs the PMU where sometimes
code has been updated for sysfs and PMU has been missed.
v2: Remove runtime_pm_if_in_use from read_actual_frequency_fw (Tvrtko)
v3: (Tvrtko)
- Remove goto in __read_cagf
- Unexport intel_rps_get_cagf and intel_rps_read_punit_req
Fixes: 22009b6dad ("drm/i915/mtl: Modify CAGF functions for MTL")
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8280
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316004800.2539753-1-ashutosh.dixit@intel.com
clang with W=1 reports
drivers/gpu/drm/gma500/psb_irq.c:35:19: error: unused function
'gma_pipe_event' [-Werror,-Wunused-function]
static inline u32 gma_pipe_event(int pipe)
^
This function is not used, so remove it.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230319142320.1704336-1-trix@redhat.com
Smatch reports:
drivers/char/tpm/tpm-interface.c:470 tpm_init() error:
'tpm_class' dereferencing possible ERR_PTR()
If class_create() returns error pointer, we are dereferencing a possible
error pointer. Fix this by moving the dereference post error handling.
Fixes: a010eb8812 ("tpm: fix up the tpm_class shutdown_pre pointer when created")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20230321061416.626561-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The recent support of low latency playback in USB-audio driver made
the snd_usb_queue_pending_output_urbs() function to be called via PCM
ack ops. In the new code path, the function is performed already in
the PCM stream lock. The problem is that, when an XRUN is detected,
the function calls snd_pcm_xrun() to notify, but snd_pcm_xrun() is
supposed to be called only outside the stream lock. As a result, it
leads to a deadlock of PCM stream locking.
For avoiding such a recursive locking, this patch adds an additional
check to the code paths in PCM core that call the ack callback; now it
checks the error code from the callback, and if it's -EPIPE, the XRUN
is handled in the PCM core side gracefully. Along with it, the
USB-audio driver code is changed to follow that, i.e. -EPIPE is
returned instead of the explicit snd_pcm_xrun() call when the function
is performed already in the stream lock.
Fixes: d5f871f89e ("ALSA: usb-audio: Improved lowlatency playback support")
Reported-and-tested-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20230317195128.3911155-1-john@metanate.com
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by; Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20230320142838.494-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent commit f83bb25924 ("ALSA: hda/conexant: Add quirk for
LENOVO 20149 Notebook model") introduced a quirk for the device with
17aa:3977, but this caused a regression on another model (Lenovo
Ideadpad U31) with the very same PCI SSID. And, through skimming over
the net, it seems that this PCI SSID is used for multiple different
models, so it's no good idea to apply the quirk with the SSID.
Although we may take a different ID check (e.g. the codec SSID instead
of the PCI SSID), unfortunately, the original patch author couldn't
identify the hardware details any longer as the machine was returned,
and we can't develop the further proper fix.
In this patch, instead, we partially revert the change so that the
quirk won't be applied as default for addressing the regression.
Meanwhile, the quirk function itself is kept, and it's now made to be
applicable via the explicit model=lenovo-20149 option.
Fixes: f83bb25924 ("ALSA: hda/conexant: Add quirk for LENOVO 20149 Notebook model")
Reported-by: Jetro Jormalainen <jje-lxkl@jetro.fi>
Link: https://lore.kernel.org/r/20230308215009.4d3e58a6@mopti
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230320140954.31154-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This moves all hugetlb sysctls to its own file, also kill an
useless hugetlb_treat_movable_handler() defination.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The sysctl_unprivileged_userfaultfd is part of userfaultfd, move it to
its own file.
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Add the free_percpu for the allocated "vf->hw.lmt_info" in order to avoid
memory leak, same as the "pf->hw.lmt_info" in
`drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c`.
Fixes: 5c0512072f ("octeontx2-pf: cn10k: Use runtime allocated LMTLINE region")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Link: https://lore.kernel.org/r/20230317064337.18198-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
I'm trying to make more of the sk_buff bits optional.
Move the BPF-accessed bits a little - because they must
be at coding-time-constant offsets they must precede any
optional bit. While at it clean up the naming a bit.
v1: https://lore.kernel.org/all/20230308003159.441580-1-kuba@kernel.org/
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
