The fixed number of offload flow rule is only supported scenario of one
ct zone, in the scenario of multiple ct zones, dynamic number and more
number of offload flow rules are required. In order to support scenario
of multiple ct zones, parameter num_rules is added for to offload flow
rules
Signed-off-by: Wentao Jia <wentao.jia@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The chain_index has different means in pre ct entry and post ct entry.
In pre ct entry, it means chain index, but in post ct entry, it means
goto chain index, it is confused.
chain_index and goto_chain_index may be present in one flow rule, It
cannot be distinguished by one field chain_index, both chain_index
and goto_chain_index are required in the follow-up patch to support
multiple ct zones
Another field goto_chain_index is added to record the goto chain index.
If no goto action in post ct entry, goto_chain_index is 0.
Signed-off-by: Wentao Jia <wentao.jia@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'ct_clear' action only or no ct action is supported for 'post_ct_flow'.
But in scenario of multiple ct zones, one non 'ct_clear' ct action or
more ct actions, including 'ct_clear action', may be present in one flow
rule. If ct state match key is 'ct_established', the flow rule is still
expected to be classified as 'post_ct_flow'. Check ct status first in
function "is_post_ct_flow" to achieve this.
Signed-off-by: Wentao Jia <wentao.jia@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the scenario of multiple ct zones, ct state key match and ct action
is present in one flow rule, the flow rule is classified to post_ct_flow
in design.
There is no ct state key match for pre ct flow, the judging condition
is added to function "is_pre_ct_flow".
Chain_index is another field for judging which flows are pre ct flow
If chain_index not 0, the flow is not pre ct flow.
Signed-off-by: Wentao Jia <wentao.jia@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CT action is a special case different from other actions, CT clear action
is not required when get ct action, but this case is not considered.
If CT clear action in the flow rule, skip the CT clear action when get ct
action, return the first ct action that is not a CT clear action
Signed-off-by: Wentao Jia <wentao.jia@corigine.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Saeed Mahameed says:
====================
mlx5-updates-2023-03-13
1) Trivial cleanup patches
2) By Sandipan Patra: Implement thermal zone to report NIC temperature
3) Adham Faris, Improves devlink health diagnostics for netdev objects
4) From Maor, Enable TC offload for egress and engress MACVLAN over bond
5) From Gal, add devlink hairpin queues parameters to replace debugfs
as was discussed in [1]:
[1] https://lore.kernel.org/all/20230111194608.7f15b9a1@kernel.org/
====================
Link: https://lore.kernel.org/all/20230314054234.267365-1-saeed@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support offloading of TC rules that mirror/redirect egress traffic to a
MACVLAN device, which is attached to bond device which master mlx5 devices.
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-16-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support offloading of TC rules that filter ingress traffic from a MACVLAN
device, which is attached to bond device.
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-15-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for next patch which will add new check
if device block can be setup, extract all existing checks
to function to make it more readable and maintainable.
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-14-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Print the number of hairpin queues and size as part of the hairpin table
dump.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-13-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We refer to a TC NIC rule that involves forwarding as "hairpin".
Hairpin queues are mlx5 hardware specific implementation for hardware
forwarding of such packets.
Per the discussion in [1], move the hairpin queues control (number and
size) from debugfs to devlink.
Expose two devlink params:
- hairpin_num_queues: control the number of hairpin queues
- hairpin_queue_size: control the size (in packets) of the hairpin queues
[1] https://lore.kernel.org/all/20230111194608.7f15b9a1@kernel.org/
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-12-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Downstream patches require devlink params to access the PTYS register,
move the needed functions from mlx5e to the core layer.
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-11-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently RQ health diagnostics doesn't inform the user whether an RQ
is an XSK RQ or not.
Address this, by adding XSK state flag to RQ SW state enum in core/en.h.
XSK will be '1' if current RQ is an XSK RQ, and it will be '0' if it's
not.
In this example below, it can be seen that XSK field value is '1' since
xdpsock program have been attached to channel 0 before issuing the
devlink query command:
$ devlink health diagnose auxiliary/mlx5_core.eth.0/65535 reporter rx
Output:
=======================================================================
Common config:
RQ:
type: 2 stride size: 4096 size: 16 ts_format: FRC
CQ:
stride size: 64 size: 1024
RQs:
channel ix: 0 rqn: 4236 HW state: 1 WQE counter: 15 posted WQEs: 15 cc: 15
SW State:
enabled: 1 recovering: 0 am: 1 no_csum_complete: 1 csum_full: 0 mini_cqe_hw_stridx: 1 shampo: 0 mini_cqe_enhanced: 0 xsk: 1
CQ:
cqn: 1085 HW status: 0 ci: 0 size: 1024
EQ:
eqn: 7 irqn: 32 vecidx: 0 ci: 5 size: 2048
ICOSQ:
sqn: 4229 HW state: 1 cc: 158 pc: 158 WQE size: 2048
CQ:
cqn: 1080 cc: 1 size: 2048
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-10-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dynamic interrupt moderation RQ and SQ feature represented by
MLX5E_RQ_STATE_AM and MLX5E_SQ_STATE_AM enums respectively, is not
consistent with the feature naming in the driver, and with the formal
feature and library names.
Hence, change MLX5E_RQ_STATE_AM and MLX5E_SQ_STATE_AM enum type names in
core/en.h to MLX5E_RQ_STATE_DIM and MLX5E_SQ_STATE_DIM respectively.
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-7-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previous check was comparing against the fifo mask. The mask is size of the
fifo (power of two) minus one, so a less than or equal comparator should be
used for checking if the fifo has room for the SKB.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-6-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement thermal zone support for mlx5 based HW. The NIC
uses temperature sensor provided by ASIC to report current temperature
to thermal core.
Signed-off-by: Sandipan Patra <spatra@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add comment to mlx5_devlink_params_register() functions so it is clear
that only driver init params should be registered here.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-4-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If driver teardown is called while PCI is turned off, there is a race
between health recovery and teardown. If health recovery already started
it will wait 60 sec trying to see if PCI gets back and it can recover,
but actually there is no need to wait anymore once teardown was called.
Use the MLX5_BREAK_FW_WAIT flag which is set on driver teardown to break
waiting for PCI up.
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When shutdown or remove callbacks are called the driver sets the flag
MLX5_BREAK_FW_WAIT, to stop waiting for FW as teardown was called. There
is no need to clear the bit as once shutdown or remove were called as
there is no way back, the driver is going down. Furthermore, if not
cleared the flag can be used also in other loops where we may wait while
teardown was already called.
Use test_bit() instead of test_and_clear_bit() as there is no need to
clear the flag.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230314054234.267365-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the blamed commit, phy_ethtool_get_wol() and phy_ethtool_set_wol()
acquire phydev->lock, but the mscc phy driver implementations,
vsc85xx_wol_get() and vsc85xx_wol_set(), acquire the same lock as well,
resulting in a deadlock.
$ ip link set swp3 down
============================================
WARNING: possible recursive locking detected
mscc_felix 0000:00:00.5 swp3: Link is Down
--------------------------------------------
ip/375 is trying to acquire lock:
ffff3d7e82e987a8 (&dev->lock){+.+.}-{4:4}, at: vsc85xx_wol_get+0x2c/0xf4
but task is already holding lock:
ffff3d7e82e987a8 (&dev->lock){+.+.}-{4:4}, at: phy_ethtool_get_wol+0x3c/0x6c
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&dev->lock);
lock(&dev->lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
2 locks held by ip/375:
#0: ffffd43b2a955788 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg+0x144/0x58c
#1: ffff3d7e82e987a8 (&dev->lock){+.+.}-{4:4}, at: phy_ethtool_get_wol+0x3c/0x6c
Call trace:
__mutex_lock+0x98/0x454
mutex_lock_nested+0x2c/0x38
vsc85xx_wol_get+0x2c/0xf4
phy_ethtool_get_wol+0x50/0x6c
phy_suspend+0x84/0xcc
phy_state_machine+0x1b8/0x27c
phy_stop+0x70/0x154
phylink_stop+0x34/0xc0
dsa_port_disable_rt+0x2c/0xa4
dsa_slave_close+0x38/0xec
__dev_close_many+0xc8/0x16c
__dev_change_flags+0xdc/0x218
dev_change_flags+0x24/0x6c
do_setlink+0x234/0xea4
__rtnl_newlink+0x46c/0x878
rtnl_newlink+0x50/0x7c
rtnetlink_rcv_msg+0x16c/0x58c
Removing the mutex_lock(&phydev->lock) calls from the driver restores
the functionality.
Fixes: 2f987d4866 ("net: phy: Add locks to ethtool functions")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230314153025.2372970-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'temp' was used before commit c0c99d0cd1 ("net: phy: micrel: remove
the use of .ack_interrupt()") refactored the code. Now, we can simplify
it a little.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230314124928.44948-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 899a3cbbf7 ("net: phy: remove states PHY_STARTING and
PHY_PENDING") missed to update a comment in phy_probe. Remove
superfluous "Description:" prefix while we are here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20230314124856.44878-1-wsa+renesas@sang-engineering.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
ice: refactor mailbox overflow detection
Jake Keller says:
The primary motivation of this series is to cleanup and refactor the mailbox
overflow detection logic such that it will work with Scalable IOV. In
addition a few other minor cleanups are done while I was working on the
code in the area.
First, the mailbox overflow functions in ice_vf_mbx.c are refactored to
store the data per-VF as an embedded structure in struct ice_vf, rather than
stored separately as a fixed-size array which only works with Single Root
IOV. This reduces the overall memory footprint when only a handful of VFs
are used.
The overflow detection functions are also cleaned up to reduce the need for
multiple separate calls to determine when to report a VF as potentially
malicious.
Finally, the ice_is_malicious_vf function is cleaned up and moved into
ice_virtchnl.c since it is not Single Root IOV specific, and thus does not
belong in ice_sriov.c
I could probably have done this in fewer patches, but I split pieces out to
hopefully aid in reviewing the overall sequence of changes. This does cause
some additional thrash as it results in intermediate versions of the
refactor, but I think its worth it for making each step easier to
understand.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: call ice_is_malicious_vf() from ice_vc_process_vf_msg()
ice: move ice_is_malicious_vf() to ice_virtchnl.c
ice: print message if ice_mbx_vf_state_handler returns an error
ice: pass mbxdata to ice_is_malicious_vf()
ice: remove unnecessary &array[0] and just use array
ice: always report VF overflowing mailbox even without PF VSI
ice: declare ice_vc_process_vf_msg in ice_virtchnl.h
ice: initialize mailbox snapshot earlier in PF init
ice: merge ice_mbx_report_malvf with ice_mbx_vf_state_handler
ice: remove ice_mbx_deinit_snapshot
ice: move VF overflow message count into struct ice_mbx_vf_info
ice: track malicious VFs in new ice_mbx_vf_info structure
ice: convert ice_mbx_clear_malvf to void and use WARN
ice: re-order ice_mbx_reset_snapshot function
====================
Link: https://lore.kernel.org/r/20230313182123.483057-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is no need to declare an extra tables to just create directory,
this can be easily be done with a prefix path with register_sysctl().
Simplify this registration.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310232850.3960676-2-mcgrof@kernel.org
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it might not be relevant here). This
also fixes !CONFIG_OF error:
drivers/ptp/ptp_ines.c:783:34: error: ‘ines_ptp_ctrl_of_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20230312132637.352755-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The reg address of the tsens_mode nvmem cell is correct but the unit
address does not match (0xec vs 0xef). Fix it. No functional change.
Fixes: 24aafd041f ("arm64: dts: qcom: msm8916: specify per-sensor calibration cells")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308123617.101211-1-stephan.gerhold@kernkonzept.com
The node is incomplete and doesn't need a subnode, add the missing
properties and move everything to the root of qup-spi0-cs-state node.
Fixes: ffc50b2d38 ("arm64: dts: qcom: Add base SM8550 dtsi")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308-topic-sm8550-upstream-dt-fixups-v1-2-595b02067672@linaro.org
To align with rest of the devicetree files, let's move the "status"
property down
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308082424.140224-11-manivannan.sadhasivam@linaro.org
To align with the rest of the devicetree files and the relative properties,
let's list the values of properties such as {reg/clock/interrupt}-names
vertically.
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308082424.140224-9-manivannan.sadhasivam@linaro.org
The PCIe controller in SDX55 can act as the RC controller also. Let's
add support for it.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308082424.140224-8-manivannan.sadhasivam@linaro.org
There is only one PCIe PHY in this SoC, so there is no need to add an
index to the suffix. This also matches the naming convention of the PCIe
controller.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308082424.140224-7-manivannan.sadhasivam@linaro.org
Unit address of PCIe EP node should be 0x1c00000 as it has to match the
first address specified in the reg property.
This also requires sorting the node in the ascending order.
Fixes: e6b6981328 ("ARM: dts: qcom: sdx55: Add support for PCIe EP")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308082424.140224-6-manivannan.sadhasivam@linaro.org
Update compatible for QDU1000 and QRU1000 to include the interconnect
these devices have.
Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230306231202.12223-2-quic_molvera@quicinc.com
The ltc2992 drivers uses a mutex and I2C bus access in its GPIO chip `set`
and `get` implementation. This means these functions can sleep and the GPIO
chip should set the `can_sleep` property to true.
This will ensure that a warning is printed when trying to set or get the
GPIO value from a context that potentially can't sleep.
Fixes: 9ca26df1ba ("hwmon: (ltc2992) Add support for GPIOs.")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230314093146.2443845-2-lars@metafoo.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The adm1266 driver uses I2C bus access in its GPIO chip `set` and `get`
implementation. This means these functions can sleep and the GPIO chip
should set the `can_sleep` property to true.
This will ensure that a warning is printed when trying to set or get the
GPIO value from a context that potentially can't sleep.
Fixes: d98dfad35c ("hwmon: (pmbus/adm1266) Add support for GPIOs")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20230314093146.2443845-1-lars@metafoo.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The initialization assignment of the variable ret is changed to 0, only
in 'goto fail;' Use the ret variable as the function return value.
Signed-off-by: Li zeming <zeming@nfschina.com>
Link: https://lore.kernel.org/r/20230317182538.3027-1-zeming@nfschina.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
gpio-keys,wakeup is a deprecated property:
sm8250-xiaomi-elish.dtb: gpio-keys: key-vol-up: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304123358.34274-8-krzysztof.kozlowski@linaro.org
gpio-keys,wakeup is a deprecated property:
sm8250-sony-xperia-edo-pdx206.dtb: gpio-keys: key-vol-down: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304123358.34274-7-krzysztof.kozlowski@linaro.org
gpio-keys,wakeup is a deprecated property:
sm6115p-lenovo-j606f.dtb: gpio-keys: key-volume-up: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304123358.34274-6-krzysztof.kozlowski@linaro.org
gpio-keys,wakeup is a deprecated property:
sdm630-sony-xperia-nile-voyager.dtb: gpio-keys: key-vol-down: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304123358.34274-5-krzysztof.kozlowski@linaro.org
gpio-keys,wakeup is a deprecated property:
sc7280-idp.dtb: gpio-keys: key-volume-up: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304123358.34274-4-krzysztof.kozlowski@linaro.org
gpio-keys,wakeup is a deprecated property:
msm8998-sony-xperia-yoshino-lilac.dtb: gpio-keys: button-vol-down: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304123358.34274-3-krzysztof.kozlowski@linaro.org
gpio-keys,wakeup is a deprecated property:
msm8998-fxtec-pro1.dtb: gpio-hall-sensors: event-hall-sensor1: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304123358.34274-2-krzysztof.kozlowski@linaro.org
gpio-keys,wakeup is a deprecated property:
sm8150-sony-xperia-kumano-bahamut.dtb: gpio-keys: key-camera-focus: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230304123358.34274-1-krzysztof.kozlowski@linaro.org
