Up until now PPC64 managed to avoid using iommu_ops. The VFIO driver
uses a SPAPR TCE sub-driver and all iommu_ops uses were kept in the
Type1 VFIO driver. Recent development added 2 uses of iommu_ops to the
generic VFIO which broke POWER:
- a coherency capability check;
- blocking IOMMU domain - iommu_group_dma_owner_claimed()/...
This adds a simple iommu_ops which reports support for cache coherency
and provides a basic support for blocking domains. No other domain types
are implemented so the default domain is NULL.
Since now iommu_ops controls the group ownership, this takes it out of
VFIO.
This adds an IOMMU device into a pci_controller (=PHB) and registers it
in the IOMMU subsystem, iommu_ops is registered at this point. This
setup is done in postcore_initcall_sync.
This replaces iommu_group_add_device() with iommu_probe_device() as the
former misses necessary steps in connecting PCI devices to IOMMU
devices. This adds a comment about why explicit iommu_probe_device() is
still needed.
The previous discussion is here:
https://lore.kernel.org/r/20220707135552.3688927-1-aik@ozlabs.ru/https://lore.kernel.org/r/20220701061751.1955857-1-aik@ozlabs.ru/
Fixes: e8ae0e140c ("vfio: Require that devices support DMA cache coherence")
Fixes: 70693f4708 ("vfio: Set DMA ownership for VFIO devices")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
[mpe: Fix CONFIG_IOMMU_API=n build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/2000135730.16998523.1678123860135.JavaMail.zimbra@raptorengineeringinc.com
Code indentation should use tabs where possible and miss a '*'.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Message-Id: <tencent_A492CB3F9592578451154442830EA1B02C07@qq.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Code indentation should use tabs where possible.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Message-Id: <tencent_31E6ACADCB6915E157CF5113C41803212107@qq.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
nested_vmx_check_controls() has already run by the time KVM checks host state,
so the "host address space size" exit control can only be set on x86-64 hosts.
Simplify the condition at the cost of adding some dead code to 32-bit kernels.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The effective values of the guest CR0 and CR4 registers may differ from
those included in the VMCS12. In particular, disabling EPT forces
CR4.PAE=1 and disabling unrestricted guest mode forces CR0.PG=CR0.PE=1.
Therefore, checks on these bits cannot be delegated to the processor
and must be performed by KVM.
Reported-by: Reima ISHII <ishiir@g.ecc.u-tokyo.ac.jp>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A single patch to address a rather annoying bug w.r.t. guest timer
offsetting. Effectively the synchronization of timer offsets between
vCPUs was broken, leading to inconsistent timer reads within the VM.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZAzwRwAKCRCivnWIJHzd
Fh0nAP4seI9aMrv0EnCHS9nufCSYQZYGBxOe+8EyUOIERxyCPgEAspn6fNJWnc6o
RWbFGMyNHPgeQgGjH+g4ehqh5LSeMww=
=uFU2
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.3, part #1
A single patch to address a rather annoying bug w.r.t. guest timer
offsetting. Effectively the synchronization of timer offsets between
vCPUs was broken, leading to inconsistent timer reads within the VM.
With commit 721da5cee9 ("driver core: remove CONFIG_SYSFS_DEPRECATED and
CONFIG_SYSFS_DEPRECATED_V2"), ./scripts/checkkconfigsymbols.py indicated
an unresolved reference to the config SYSFS_DEPRECATED in the SPI summary
documentation.
Simply, delete the sentence referring to the removed config there. Also
update the documentation, as these sys/class entries should always be
symlinks, as the commit message of the commit above suggests.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230314075609.5232-1-lukas.bulwahn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This is very close to a straight revert of commit 218320fec2
("regulator: core: Fix off-on-delay-us for always-on/boot-on
regulators"). We've identified that patch as causing a boot speed
regression on sc7180-trogdor boards. While boot speed certainly isn't
more important than making sure that power sequencing is correct,
looking closely at the original change it doesn't seem to have been
fully justified. It mentions "cycling issues" without describing
exactly what the issues were. That means it's possible that the
cycling issues were really a problem that should be fixed in a
different way.
Let's take a careful look at how we should handle regulators that have
an off-on-delay and that are boot-on or always-on. Linux currently
doesn't have any way to identify whether a GPIO regulator was already
on when the kernel booted. That means that when the kernel boots we
probe a regulator, see that it wants boot-on / always-on we, and then
turn the regulator on. We could be in one of two cases when we do
this:
a) The regulator might have been left on by the bootloader and we're
ensuring that it stays on.
b) The regulator might have been left off by the bootloader and we're
just now turning it on.
For case a) we definitely don't need any sort of delay. For case b) we
_might_ need some delay in case the bootloader turned the regulator
off _right_ before booting the kernel. To get the proper delay for
case b) then we can just assume a `last_off` of 0, which is what it
gets initialized to by default.
As per above, we can't tell whether we're in case a) or case b) so
we'll assume the longer delay (case b). This basically puts the code
to how it was before commit 218320fec2 ("regulator: core: Fix
off-on-delay-us for always-on/boot-on regulators"). However, we add
one important change: we make sure that the delay is actually honored
if `last_off` is 0. Though the original "cycling issues" cited were
vague, I'm hopeful that this important extra change will be enough to
fix the issues that the initial commit mentioned.
With this fix, I've confined that on a sc7180-trogdor board the delay
at boot goes down from 500 ms to ~250 ms. That's not as good as the 0
ms that we had prior to commit 218320fec2 ("regulator: core: Fix
off-on-delay-us for always-on/boot-on regulators"), but it's probably
safer because we don't know if the bootloader turned the regulator off
right before booting.
One note is that it's possible that we could be in a state that's not
a) or b) if there are other issues in the kernel. The only one I can
think of is related to pinctrl. If the pinctrl driver being used on a
board isn't careful about avoiding glitches when setting up a pin then
it's possible that setting up a pin could cause the regulator to "turn
off" briefly immediately before the regulator probes. If this is
indeed causing problems then the pinctrl driver should be fixed,
perhaps in a similar way to what was done in commit d21f4b7ffc
("pinctrl: qcom: Avoid glitching lines when we first mux to output")
Fixes: 218320fec2 ("regulator: core: Fix off-on-delay-us for always-on/boot-on regulators")
Cc: Christian Kohlschütter <christian@kohlschutter.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20230313111806.1.I2eaad872be0932a805c239a7c7a102233fb0b03b@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
There are many log messages throughout the mt8192 sound drivers that
print to the info level and are triggered very frequently. Move these
messages to the debug level to avoid spamming the console.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230313212908.2282961-3-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are some log messages in the mt8192 sound code that print the
function name, presumably to aid in tracing. However this can also be
achieved by ftrace and without spamming the console, so remove these
messages.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/167874298172.26.17917791030607314817@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The hw->formats may be set by snd_dmaengine_pcm_refine_runtime_hwparams()
in component's startup()/open(), but soc_pcm_hw_init() will init
hw->formats in dpcm_runtime_setup_fe() after component's startup()/open(),
which causes the valuable hw->formats to be cleared.
So need to store the hw->formats before initialization, then restore
it after initialization.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1678346017-3660-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Same quirks as the 'Bishop County' NUC M15, except the rt711 is in the
'JD2 100K' jack detection mode.
Link: https://github.com/thesofproject/linux/issues/4088
Signed-off-by: Eugene Huang <eugene.huang99@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230314090553.498664-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Quite a lot has changed over the last few kernel releases with the
introduction of vfs{g,u}id_t and struct mnt_idmap. Update the
documentation accordingly.
Cc: Seth Forshee <sforshee@kernel.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Subsequent patches are going to add dependency/use of iommu_ops which is
initialized in subsys_initcall as well.
This moves pciobios_init() to the next initcall level.
This should not cause behavioral change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/12303156.16998521.1678123842049.JavaMail.zimbra@raptorengineeringinc.com
PPC64 IOMMU API defines iommu_table_group_ops which handles DMA windows
for PEs: control the ownership, create/set/unset a table the hardware
for dynamic DMA windows (DDW). VFIO uses the API to implement support on
POWER.
So far only PowerNV IODA2 (POWER8 and newer machines) implemented this
and other cases (POWER7 or nested KVM) did not and instead reused
existing iommu_table structs. This means 1) no DDW 2) ownership transfer
is done directly in the VFIO SPAPR TCE driver.
Soon POWER is going to get its own iommu_ops and ownership control is
going to move there. This implements spapr_tce_table_group_ops which
borrows iommu_table tables. The upside is that VFIO needs to know less
about POWER.
The new ops returns the existing table from create_table() and only
checks if the same window is already set. This is only going to work if
the default DMA window starts table_group.tce32_start and as big as
pe->table_group.tce32_size (not the case for IODA2+ PowerNV).
This changes iommu_table_group_ops::take_ownership() to return an error
if borrowing a table failed.
This should not cause any visible change in behavior for PowerNV.
pSeries was not that well tested/supported anyway.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
[mpe: Fix CONFIG_IOMMU_API=n build (skiroot_defconfig), & formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/525438831.16998517.1678123820075.JavaMail.zimbra@raptorengineeringinc.com
The RTAS work area allocator uses code that is built by
GENERIC_ALLOCATOR, so the PSERIES Kconfig should select the
required Kconfig symbol to fix multiple build errors.
powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o: in function `.rtas_work_area_allocator_init':
rtas-work-area.c:(.init.text+0x288): undefined reference to `.gen_pool_create'
powerpc64-linux-ld: rtas-work-area.c:(.init.text+0x2dc): undefined reference to `.gen_pool_set_algo'
powerpc64-linux-ld: rtas-work-area.c:(.init.text+0x310): undefined reference to `.gen_pool_add_owner'
powerpc64-linux-ld: rtas-work-area.c:(.init.text+0x43c): undefined reference to `.gen_pool_destroy'
powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o:(.toc+0x0): undefined reference to `gen_pool_first_fit_order_align'
powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o: in function `.__rtas_work_area_alloc':
rtas-work-area.c:(.ref.text+0x14c): undefined reference to `.gen_pool_alloc_algo_owner'
powerpc64-linux-ld: rtas-work-area.c:(.ref.text+0x238): undefined reference to `.gen_pool_alloc_algo_owner'
powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o: in function `.rtas_work_area_free':
rtas-work-area.c:(.ref.text+0x44c): undefined reference to `.gen_pool_free_owner'
Fixes: 43033bc62d ("powerpc/pseries: add RTAS work area allocator")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230223070116.660-2-rdunlap@infradead.org
Some of these dependencies used to be sensible when only a small part of
the platforms supported by ARCH=arm could be compiled together in a
single kernel image. Nowadays ARCH_MULTIPLATFORM is only used as a guard
for kernel options incompatible with a multiplatform image. See commit
84fc863606 ("ARM: make ARCH_MULTIPLATFORM user-visible") for some more
details.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221209220555.3631364-1-u.kleine-koenig@pengutronix.de
Integers are not converted to floats during division in Python 2 which
results in incorrect IPC values. Fix by switching to new division
behavior.
Fixes: a483e64c0b ("perf scripting python: intel-pt-events.py: Add --insn-trace and --src-trace")
Signed-off-by: Roman Lozko <lozko.roma@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20230310150445.2925841-1-lozko.roma@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that BPF skel based tools will be built by default if the toolchain
pieces that are needed are available, building directly on the source
tree will produce a vmlinux.h from the BTF info that needs to get
ignored.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
A table was renamed and needed to be renamed in the empty case.
Fixes: 62774db2a0 ("perf jevents: Generate metrics and events as separate tables")
Reviewed-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230308002714.1755698-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Show lock type names after the symbol of locks if any. This can be
useful especially when it doesn't show the lock symbols.
The indentation before the lock type parenthesis is to recognize lock
symbols more easily.
$ sudo ./perf lock con -abl -- sleep 1
contended total wait max wait avg wait address symbol
44 6.13 ms 284.49 us 139.28 us ffffffff92e06080 tasklist_lock (rwlock)
159 983.38 us 12.38 us 6.18 us ffff8cc717c90000 siglock (spinlock)
10 679.90 us 153.35 us 67.99 us ffff8cdc2872aaf8 mmap_lock (rwsem)
9 558.11 us 180.67 us 62.01 us ffff8cd647914038 mmap_lock (rwsem)
78 228.56 us 7.82 us 2.93 us ffff8cc700061c00 (spinlock)
5 41.60 us 16.93 us 8.32 us ffffd853acb41468 (spinlock)
10 37.24 us 5.87 us 3.72 us ffff8cd560b5c200 siglock (spinlock)
4 11.17 us 3.97 us 2.79 us ffff8d053ddf0c80 rq_lock (spinlock)
1 7.86 us 7.86 us 7.86 us ffff8cd64791404c (spinlock)
1 4.13 us 4.13 us 4.13 us ffff8d053d930c80 rq_lock (spinlock)
7 3.98 us 1.67 us 568 ns ffff8ccb92479440 (mutex)
2 2.62 us 2.33 us 1.31 us ffff8cc702e6ede0 (rwlock)
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230313204825.2665483-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Using the BPF_PROG_RUN mechanism, we can run a raw_tp BPF program to
collect some semi-global locks like per-cpu locks. Let's add runqueue
locks using bpf_per_cpu_ptr() helper.
$ sudo ./perf lock con -abl -- sleep 1
contended total wait max wait avg wait address symbol
248 3.25 ms 32.23 us 13.10 us ffff8cc75cfd2940 siglock
60 217.91 us 9.69 us 3.63 us ffff8cc700061c00
8 70.23 us 13.86 us 8.78 us ffff8cc703629484
4 56.32 us 35.81 us 14.08 us ffff8cc78b66f778 mmap_lock
4 16.70 us 5.18 us 4.18 us ffff8cc7036a0684
3 4.99 us 2.65 us 1.66 us ffff8d053da30c80 rq_lock
2 3.44 us 2.28 us 1.72 us ffff8d053dcf0c80 rq_lock
9 2.51 us 371 ns 278 ns ffff8ccb92479440
2 2.11 us 1.24 us 1.06 us ffff8d053db30c80 rq_lock
2 2.06 us 1.69 us 1.03 us ffff8d053d970c80 rq_lock
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230313204825.2665483-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Likewise, we can display siglock by following the pointer like
current->sighand->siglock.
$ sudo ./perf lock con -abl -- sleep 1
contended total wait max wait avg wait address symbol
16 2.18 ms 305.35 us 136.34 us ffffffff92e06080 tasklist_lock
28 521.78 us 31.16 us 18.63 us ffff8cc703783ec4
7 119.03 us 23.55 us 17.00 us ffff8ccb92479440
15 88.29 us 10.06 us 5.89 us ffff8cd560b5f380 siglock
7 37.67 us 9.16 us 5.38 us ffff8d053daf0c80
5 8.81 us 4.92 us 1.76 us ffff8d053d6b0c80
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230313204825.2665483-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes there are severe contentions on the mmap_lock and we want
see it in the -l/--lock-addr output. However it cannot symbolize
the mmap_lock because it's allocated dynamically without symbols.
Stephane and Hao gave me an idea separately to display mmap_lock by
following the current->mm pointer. I added a flag to mark mmap_lock
after comparing the lock address so that it can show them differently.
With this change it can show mmap_lock like below:
$ sudo ./perf lock con -abl -- sleep 10
contended total wait max wait avg wait address symbol
...
16344 312.30 ms 2.22 ms 19.11 us ffff8cc702595640
17686 310.08 ms 1.49 ms 17.53 us ffff8cc7025952c0
3 84.14 ms 45.79 ms 28.05 ms ffff8cc78114c478 mmap_lock
3557 76.80 ms 68.75 us 21.59 us ffff8cc77ca3af58
1 68.27 ms 68.27 ms 68.27 ms ffff8cda745dfd70
9 54.53 ms 7.96 ms 6.06 ms ffff8cc7642a48b8 mmap_lock
14629 44.01 ms 60.00 us 3.01 us ffff8cc7625f9ca0
3481 42.63 ms 140.71 us 12.24 us ffffffff937906ac vmap_area_lock
16194 38.73 ms 42.15 us 2.39 us ffff8cd397cbc560
11 38.44 ms 10.39 ms 3.49 ms ffff8ccd6d12fbb8 mmap_lock
1 5.43 ms 5.43 ms 5.43 ms ffff8cd70018f0d8
1674 5.38 ms 422.93 us 3.21 us ffffffff92e06080 tasklist_lock
581 4.51 ms 130.68 us 7.75 us ffff8cc9b1259058
5 3.52 ms 1.27 ms 703.23 us ffff8cc754510070
112 3.47 ms 56.47 us 31.02 us ffff8ccee38b3120
381 3.31 ms 73.44 us 8.69 us ffffffff93790690 purge_vmap_area_lock
255 3.19 ms 36.35 us 12.49 us ffff8d053ce30c80
Note that mmap_lock was renamed some time ago and it needs to support
old kernels with a different name 'mmap_sem'.
Suggested-by: Hao Luo <haoluo@google.com>
Suggested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230313204825.2665483-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Building without libelf support is going disable a lot of
functionality. Require that the NO_LIBELF=1 build option is passed if
this is intentional.
Committer notes:
Add NO_LIBELF=1 to the 'make_static' target in tools/perf/tests/make so
that 'make -C tools/perf build-test' works.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Pavithra Gurushankar <gpavithrasha@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230311065753.3012826-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The option controlled nothing and no code depends, conditional or
otherwise, on libnewt.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Pavithra Gurushankar <gpavithrasha@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230311065753.3012826-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If libtraceevent isn't present, the build will warn and continue. This
disables a number of features and so isn't desirable. This change
makes the build error for this case. The build can still be made to
happen by adding NO_LIBTRACEEVENT=1.
Committer notes:
Add NO_LIBTRACEEVENT=1 to the 'make_static' target in
tools/perf/tests/make so that 'make -C tools/perf build-test' works.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Pavithra Gurushankar <gpavithrasha@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230311065753.3012826-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If libpfm4 passes the feature test, it would be nice to have it
enabled rather than also requiring the LIBPFM4=1 build flag.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Pavithra Gurushankar <gpavithrasha@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230311065753.3012826-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Refactor C++ demangling out of symbol-elf into its own files similar
to other languages. Add abi::__cxa_demangle support. As the other
demanglers are not shippable with distributions, this brings back C++
demangling in a common case. It isn't perfect as the support for
optionally demangling arguments and modifiers isn't present.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Pavithra Gurushankar <gpavithrasha@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230311065753.3012826-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
cxxabi.h is part of libsdtc++ and LLVM's libcxx, providing
abi::__cxa_demangle a portable C++ demangler. Add a feature test to
detect that the function is available.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Pavithra Gurushankar <gpavithrasha@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230311065753.3012826-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
binutils is GPLv3 so distributions cannot ship perf linked against
libbfd and libiberty as the licenses are incompatible. Rather than
defaulting the build to opting in to libbfd and libiberty support and
opting out via NO_LIBBFD=1 and NO_DEMANGLE=1, make building against
the libraries optional and enabled with BUILD_NONDISTRO=1.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Pavithra Gurushankar <gpavithrasha@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230311065753.3012826-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rather than disabling jevents if a sufficient python isn't present
error in the build. This avoids the build progressing but the binary
being degraded. The build can still succeed by specifying NO_JEVENTS=1
to the build and this is conveyed in the error message.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Pavithra Gurushankar <gpavithrasha@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230311065753.3012826-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
sched_getcpu may not be present and so a feature test and definition
exist to workaround this in the build. The feature test is used to
define HAVE_SCHED_GETCPU_SUPPORT and so this is sufficient to know
whether the local sched_getcpu is needed and a weak symbol can be
avoided.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Pavithra Gurushankar <gpavithrasha@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230311065753.3012826-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
HAVE_GLIBC_SUPPORT is only used in `perf version --build-options` but
doesn't control any behavior. Remove from the build to simplify it.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Pavithra Gurushankar <gpavithrasha@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230311065753.3012826-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
BPF skeleton support is now key to a number of perf features. Rather
than making it so that BPF support must be enabled for the build, make
this the default and error if the build lacks a clang and libbpf that
are sufficient. To avoid the error and build without BPF skeletons the
NO_BPF_SKEL=1 flag can be used. Add a build-options flag to 'perf
version' to enable detection of the BPF skeleton support and use this
in the offcpu shell test.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Pavithra Gurushankar <gpavithrasha@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230311065753.3012826-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a build target to echo the python/perf.so's name from
Makefile.perf. Use it in tests/make so the correct target is built and
tested for.
Fixes: caec54705a ("perf build: Fix python/perf.so library's name")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Pavithra Gurushankar <gpavithrasha@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20230311065753.3012826-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tests are no longer applicable as libbpf 1.0 can be assumed.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked/Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked/Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Christy Lee <christylee@fb.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230116010115.490713-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The feature tests were necessary for libbpf pre-1.0, but as the libbpf
implies at least 1.0 we can remove these now.
Committer notes:
Modified tools/perf/Makefile.config to better reflect the reason for
failure when the libbpf present is < 1.0 and LIBBPF_DYNAMIC=1 was asked
for.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Christy Lee <christylee@fb.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230116010115.490713-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
libbpf 1.0 represented a cleanup and stabilization of APIs. Simplify
development by only passing the feature test if libbpf 1.0 is installed.
Committer notes:
Change 'make -C tools/perf build-test' so that the LIBBPF_DYNAMIC=1 test
runs only if libbpf is >= 1.0.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andres Freund <andres@anarazel.de>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Christy Lee <christylee@fb.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Roberto Sassu <roberto.sassu@huawei.com>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20230116010115.490713-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While computing compressed bpp, maximum value of bits_per_pixel is
calculated that can be supported with the given link configuration
for a given mode. Avoid rounding up of this max bits_per_pixel.
Also improve documentation for computing max bits_per_pixel.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230223115509.3980226-1-ankit.k.nautiyal@intel.com
The current resource query for vf caps is driven by the driver,
which is unreasonable.
This patch adds a new command HNS_ROCE_OPC_QUERY_VF_CAPS_NUM
to support obtaining vf caps information from firmware.
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Link: https://lore.kernel.org/r/20230304091555.2241298-2-xuhaoyue1@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
There is no need to check 'rdi->qp_dev' for NULL. The field 'qp_dev'
is created in rvt_register_device() which will fail if the 'qp_dev'
allocation fails in rvt_driver_qp_init(). Overwise this pointer
doesn't changed and passed to rvt_qp_exit() by the next step.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0acb0cc7ec ("IB/rdmavt: Initialize and teardown of qpn table")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Link: https://lore.kernel.org/r/20230303124408.16685-1-n.petrova@fintech.ru
Signed-off-by: Leon Romanovsky <leon@kernel.org>
QAT_402xx is a derivative of 4xxx. Add support for that device in the
qat_4xxx driver by including the DIDs (both PF and VF), extending the
probe and the firmware loader.
402xx uses different firmware images than 4xxx. To allow that the logic
that selects the firmware images was modified.
Signed-off-by: Damian Muszynski <damian.muszynski@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'idx' is not initialized if it's not EXP_MODE nor MOD_MODE.
Use "else" instead to fix it.
Signed-off-by: Neal Liu <neal_liu@aspeedtech.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/202302261052.CVFRyq6F-lkp@intel.com/
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Issues:
- Job ring device is busy when do kexec reboot
- Failed to flush job ring when do system suspend-resume
Fix:
Flush the job ring to stop the running jobs.
Signed-off-by: Horia Geanta <horia.geanta@nxp.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
