R-Car H3 ES1.* was only available to an internal development group and
needed a lot of quirks and workarounds. These become a maintenance
burden now, so our development group decided to remove upstream support
and disable booting for this SoC. Public users only have ES2 onwards.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230307105645.5285-5-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Remove .owner field if calls are used which set it automatically.
./drivers/gpio/gpio-loongson-64bit.c:225:3-8: No need to set .owner here. The core will do it.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4450
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: William Breathitt Gray <william.gray@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
This driver require some special care: .irq_ack() was copied
from dummy_irq_chip where it was defined as noop. This only
makes sense if using handle_edge_irq() that will unconditionally
call .irq_ack() to avoid a crash, but this driver is not ever
using handle_edge_irq() so just avoid assigning .irq_ack().
A separate chip had to be created for the non-wakeup instance.
Cc: Marc Zyngier <maz@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The OMAP1 at one point was using static irqs but that time is gone,
OMAP1 uses sparse irqs like all other multiplatform targets so this
static allocation of descriptors should just go.
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
This conversion follows the pattern of the gpio-ixp4xx
hierarchical GPIO interrupt driver.
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
Cc: Marc Zyngier <maz@kernel.org>
Tested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
The IRQ chip was unnamed which seems unwise, so we just
assign the name "HISI-GPIO".
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
Cc: Marc Zyngier <maz@kernel.org>
Tested-by: Joel Stanley <joel@jms.id.au>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The driver was implemented in a way that made the irqchip optional, if a
irq was not present in the device tree. However, all of the device trees
have always had an irq, so the optional-ness has never been used.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Convert the driver to immutable irq-chip with a bit of
intuition.
Cc: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
I recently tested several old MacBooks and as far as I can tell, all
MacBooks that have an ISO keyboard have the tilde key quirk:
Product Model Year System CPU Shape Labels Country Quirky
============================================================================
05ac:021b A1181 2006 MacBook2,1 T5600 ISO British 13 Yes
05ac:021b A1181 2007 MacBook2,1 T7200 ISO Québécois 13 Yes
05ac:0229 A1181 2007 MacBook4,1 T8300 ANSI Usonian 33 No
05ac:022a A1181 2007 MacBook4,1 T8100 ISO English 13 Yes
05ac:022a A1181 2007 MacBook5,2 P7350 ISO Québécois 13 Yes
05ac:0237 A1278 2008 MacBook5,1 P7350 ISO Dutch 13 Yes
05ac:0237 A1278 2009 MacBook5,5 P7550 ISO British 13 Yes
The model number and year are from the laptop case. Since Apple printed
the same model and year on many different laptops, the system name (as
reported in the SMBIOS tables) and CPU form a more precise identifier.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Similar to many other devices using the Synopsys Designware Elantech
hardware, HP Spectre x360 13t-aw100 and 14t-ea100 report an empty
battery devices, supposedly for the active stylus.
Apply the HID_BATTERY_QUIRK_IGNORE quirk to ignore the battery reports
from these devices. Note that there are multiple versions of the panel
installed in the 14t-ea100.
Signed-off-by: Philippe Troin <phil@fifi.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Geert reports that:
> On v6.2, "make ARCH=m68k defconfig" gives you
> CONFIG_RPCSEC_GSS_KRB5=m
> On v6.3, it became builtin, due to dropping the dependencies on
> the individual crypto modules.
>
> $ grep -E "CRYPTO_(MD5|DES|CBC|CTS|ECB|HMAC|SHA1|AES)" .config
> CONFIG_CRYPTO_AES=y
> CONFIG_CRYPTO_AES_TI=m
> CONFIG_CRYPTO_DES=m
> CONFIG_CRYPTO_CBC=m
> CONFIG_CRYPTO_CTS=m
> CONFIG_CRYPTO_ECB=m
> CONFIG_CRYPTO_HMAC=m
> CONFIG_CRYPTO_MD5=m
> CONFIG_CRYPTO_SHA1=m
This behavior is triggered by the "default y" in the definition of
RPCSEC_GSS.
The "default y" was added in 2010 by commit df486a2590 ("NFS: Fix
the selection of security flavours in Kconfig"). However,
svc_gss_principal was removed in 2012 by commit 03a4e1f6dd
("nfsd4: move principal name into svc_cred"), so the 2010 fix is
no longer necessary. We can safely change the NFS_V4 and NFSD_V4
dependencies back to RPCSEC_GSS_KRB5 to get the nicer v6.2
behavior back.
Selecting KRB5 symbolically represents the true requirement here:
that all spec-compliant NFSv4 implementations must have Kerberos
available to use.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: dfe9a12345 ("SUNRPC: Enable rpcsec_gss_krb5.ko to be built without CRYPTO_DES")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This reverts commit 2b5a30cafb ("ASoC: SOF: Intel: MTL: Enable
DMI L1").
It came to our attention that the access to the EM2 register is restricted
to the DSP side on MTL compared to prior platforms.
Writing to it from the host side has no effect (negative or positive), it
is better to remove the code to not cause confusion and wrong impression.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230310133454.15362-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Our HID device need KEY_CAMERA_FOCUS event to control camera,
but this event is non-existent in current HID driver.
So we add this event in hid-input.c.
Signed-off-by: fengqi <fengqi@xiaomi.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Remove duplicated descriptor structures and make it easier to discover
bugs.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Genius digitizer tablets send incorrect (vendor-defined) report descriptors
by default. Descriptors for several models were added to override original
ones. Since they share the same structure and are handled by the same
Windows driver routine, extract the descriptor template and dynamic
parameters for easier new device adoption.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
It's been discovered that BT controller disconnect events correlate to
erratic input report timestamp deltas.
In experimentation, it's been found that ensuring that multiple
timestamp deltas are consistent prior to transmitting a rumble packet
drastically reduces the occurence rate of BT disconnects.
Alter the joycon_enforce_subcmd_rate() function to use this new
approach.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Reviewed-by: Silvan Jegen <s.jegen@gmail.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Make sure that we never throw out the most recent rumble setting,
opting to overwrite the prior queue head instead. This prevents
instances where we could get rumble stuck on if there were an overrun at
the wrong time.
Signed-off-by: Daniel J. Ogorchock <djogorchock@gmail.com>
Reviewed-by: Silvan Jegen <s.jegen@gmail.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The previous cleanup patch had lost one of its parts in a crack,
Finish the cleanup by removing the leftovers.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 9e21720a49 ("spi: mpc5xxx-psc: use devm_clk_get_enabled() for core clock")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230310111544.57342-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The recent fix for the deferred I/O by the commit
3efc61d952 ("fbdev: Fix invalid page access after closing deferred I/O devices")
caused a regression when the same fb device is opened/closed while
it's being used. It resulted in a frozen screen even if something
is redrawn there after the close. The breakage is because the patch
was made under a wrong assumption of a single open; in the current
code, fb_deferred_io_release() cleans up the page mapping of the
pageref list and it calls cancel_delayed_work_sync() unconditionally,
where both are no correct behavior for multiple opens.
This patch adds a refcount for the opens of the device, and applies
the cleanup only when all files get closed.
As both fb_deferred_io_open() and _close() are called always in the
fb_info lock (mutex), it's safe to use the normal int for the
refcounting.
Also, a useless BUG_ON() is dropped.
Fixes: 3efc61d952 ("fbdev: Fix invalid page access after closing deferred I/O devices")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230308105012.1845-1-tiwai@suse.de
The PE/COFF header has a NX compat flag which informs the firmware that
the application does not rely on memory regions being mapped with both
executable and writable permissions at the same time.
This is typically used by the firmware to decide whether it can set the
NX attribute on all allocations it returns, but going forward, it may be
used to enforce a policy that only permits applications with the NX flag
set to be loaded to begin wiht in some configurations, e.g., when Secure
Boot is in effect.
Even though the arm64 version of the EFI stub may relocate the kernel
before executing it, it always did so after disabling the MMU, and so we
were always in line with what the NX compat flag conveys, we just never
bothered to set it.
So let's set the flag now.
Cc: <stable@vger.kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
After relocating the executable image, use the EFI memory attributes
protocol to remap the code and data regions with the appropriate
permissions.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Now that the zboot loader will invoke the EFI memory attributes protocol
to remap the decompressed code and rodata as read-only/executable, we
can set the PE/COFF header flag that indicates to the firmware that the
application does not rely on writable memory being executable at the
same time.
Cc: <stable@vger.kernel.org> # v6.2+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Defines prefixed with "CONFIG" should be limited to proper Kconfig options,
that are introduced in a Kconfig file.
In the R-car driver the bitmask to configure the SEND_ENABLE mode is named
CONFIG_SEND_ENABLE.
Rename this local definition to a more suitable name, containing the
register bitfield name defined in the R-Car Gen3 rev. 2.30 user
manual.
No functional change.
Link: https://lore.kernel.org/r/20230113084516.31888-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
[lpieralisi@kernel.org: Changed define naming and commit log]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
intel_crtc_prepare_cleared_state() is unintentionally losing
the "inherited" flag. This will happen if intel_initial_commit()
is forced to go through the full modeset calculations for
whatever reason.
Afterwards the first real commit from userspace will not get
forced to the full modeset path, and thus eg. audio state may
not get recomputed properly. So if the monitor was already
enabled during boot audio will not work until userspace itself
does an explicit full modeset.
Cc: stable@vger.kernel.org
Tested-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230223152048.20878-1-ville.syrjala@linux.intel.com
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
This reverts commit 2d5253a096.
There are 2 commits with commit message "Add a secondary AT port to Telit
FN990":
commit 2d5253a096 ("bus: mhi: host: pci_generic: Add a secondary AT port
to Telit FN990")
commit 479aa3b0ec ("bus: mhi: host: pci_generic: Add a secondary AT port
to Telit FN990")
This turned out to be due to the patch getting applied through different
trees and git settled on a resolution while applying it second time. But
the second AT port of Foxconn devices don't work in PCIe mode. So the
second commit needs to be reverted.
Cc: stable@vger.kernel.org # 6.2
Fixes: 2d5253a096 ("bus: mhi: host: pci_generic: Add a secondary AT port to Telit FN990")
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://lore.kernel.org/r/20230310101715.69209-1-slark_xiao@163.com
[mani: massaged the commit message a bit, added fixes tag and CCed stable]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
There are DRM fourcc formats that have pixels smaller than a byte, but the
conversion_buf_size() function assumes that pixels are a multiple of bytes
and use the struct drm_format_info .cpp field to calculate the dst_pitch.
Instead, calculate it by using the bits per pixel (bpp) and divide it by 8
to account for formats that have sub-byte pixels.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230307215039.346863-1-javierm@redhat.com
The change to remove the implicit gpio/driver.h include was done
after fixing all the other users, but the ar7 file still needs
the same change.
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 21d9526d13 ("gpiolib: Make the legacy <linux/gpio.h> consumer-only")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Instead of ignoring errors returned by devm_clk_get() and manually
enabling the clk for the whole lifetime of the bound device, use
devm_clk_get_optional_enabled(). This is simpler and also more correct
as it doesn't ignore errors. This is also more correct because now the
call to clk_disable_unprepare() can be dropped from xgene_rng_remove()
which happened while the hwrn device was still registered. With the devm
callback disabling the clk happens correctly only after
devm_hwrng_register() is undone.
As a result struct xgene_rng_dev::clk is only used in xgene_rng_probe, and
so the struct member can be replaced by a local variable.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
dev_err_probe simplifies the idiom:
if (ret != -EPROBE_DEFER)
dev_err(...)
return ret;
, emits the error code in a human readable way and even yields a useful
entry in /sys/kernel/debug/devices_deferred in the EPROBE_DEFER case.
So simplify and at the same time improve the driver by using
dev_err_probe().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The request flags for acompress is split into two parts. Part of
it may be set by the user while the other part (ALLOC_OUTPUT) is
managed by the API.
This patch makes the split more explicit by not touching the other
bits at all in the two "set" functions that let the user modify the
flags.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When disconnecting from an MLO connection we need the AP
MLD address, not an arbitrary BSSID. Fix the code to do
that.
Fixes: 9ecff10e82 ("wifi: nl80211: refactor BSS lookup in nl80211_associate()")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230301115906.4c1b3b18980e.I008f070c7f3b8e8bde9278101ef9e40706a82902@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When userspace sets basic rates, it might send us some rates
list that's empty or consists of invalid values only. We're
currently ignoring invalid values and then may end up with a
rates bitmap that's empty, which later results in a warning.
Reject the call if there were no valid rates.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This was meant to be a u32, and while applying the patch
I tried to use policy validation for it. However, not only
did I copy/paste it to u8 instead of u32, but also used
the policy range erroneously. Fix both of these issues.
Fixes: d7c1a9a0ed ("wifi: nl80211: validate and configure puncturing bitmap")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If, e.g. in AP mode, the link was already created by userspace
but not activated yet, it has a chandef but the chandef isn't
valid and has no channel. Check for this and ignore this link.
Fixes: 7b0a0e3c3a ("wifi: cfg80211: do some rework towards MLO link APIs")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230301115906.71bd4803fbb9.Iee39c0f6c2d3a59a8227674dc55d52e38b1090cf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
pcie-kirin uses regmaps, and needs to pull them in; otherwise, with
CONFIG_PCIE_KIRIN=y and without CONFIG_REGMAP_MMIO pcie-kirin produces
a linker failure looking for __devm_regmap_init_mmio_clk().
Fixes: d19afe7be1 ("PCI: kirin: Use regmap for APB registers")
Link: https://lore.kernel.org/r/04636141da1d6d592174eefb56760511468d035d.1668410580.git.josh@joshtriplett.org
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
[lpieralisi@kernel.org: commit log and removed REGMAP select]
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: stable@vger.kernel.org # 5.16+
Add the bunch of losers who have to deal with this to MAINTAINERS so
that they can get explicitly CCed on more hw nightmares.
[ bp: Add commit message. ]
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230224213522.nofavod2jzhn22wp@treble
To fully utilize the BT polling/refresh rate, a few input events
are sent together to reduce event delay. This causes issue to the
timestamp generated by input_sync since all the events in the same
packet would pretty much have the same timestamp. This patch inserts
time interval to the events by averaging the total time used for
sending the packet.
This decision was mainly based on observing the actual time interval
between each BT polling. The interval doesn't seem to be constant,
due to the network and system environment. So, using solutions other
than averaging doesn't end up with valid timestamps.
Signed-off-by: Ping Cheng <ping.cheng@wacom.com>
Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
